MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET ECS Purpose:
This specification document represents the design criteria of the product identified herein, for the approval of the designated recipient (customer). Prior to production and delivery of this product by CWT, the customer shall endorse its approval of this specification document, upon review of the detailed information provided herein. The customers endorsement (approval) verifies that the product description is determined to be fully compliant to the customers design requirements. If one or more samples are included with this specification, the customers endorsement (approval) further verifies that the product has been tested by the customer, for which the product satisfactorily meets all aesthetic, mechanical, electrical, and operating requirements for its intended usage with the customers suitable indoor equipment or applications. To Approve: An authorized employee or agent of the customer shall endorse approval of this specification. Please sign & date this cover-page, and initial each subsequent page in the lower left corner to signify all sections have been read and found to be acceptable. A completed, original copy (signed, dated, initialed) of this specification must be returned to CWT to record the approved customer design. The customer shall keep one or more copies for its records. Upon receipt, CWT shall manufacture the product to the approved customer design. If design revisions are otherwise required, a revised specification and/or modified samples shall be provided by CWT for the endorsement (approval) by the customer. Approved Issued Checked Planned YC Leo Chen Customer Signed Channel Well Technology Co., Ltd. ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 1 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET SPEC. Revision History Change Information Current version Advance Date 20200720 Revision No. 0.1 Previous version ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 2 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET TABLE OF CONTENTS 1 SCOPE .......................................................................................................................................... 4 1.1 GENERAL DESCRIPTION ................................................................................................... 4 2 ELECTRICAL SPECIFICATION .............................................................................................. 4 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.7.1 2.7.2 DESIGN STANDARDS ................................................................................................................ 4 INPUT REQUIREMENT ............................................................................................................... 5 OUTPUT REQUIREMENT ............................................................................................................ 5 NO LOAD CONSUMPTION .......................................................................................................... 5 EFFICIENCY ............................................................................................................................. 5 FREQUENCY ............................................................................................................................ 5 INTERFACE SURFACE ............................................................................................................... 6 Distance ......................................................................................................................... 6 WITHOUT metal ............................................................................................................ 6 LED INDICATE .......................................................................................................................... 6 3 ENVIRONMENTAL SPECIFICATION ..................................................................................... 7 3.1 COOLING ................................................................................................................................ 7 3.2 TEMPERATURE ........................................................................................................................ 7 3.3 HUMIDITY ............................................................................................................................... 7 CALCULATED MEAN TIME BETWEEN FAILURES (MTBF) .............................................................. 7 3.4 3.5 WEIGHT .................................................................................................................................. 7 4 REGULATORY COMPLIANCE ................................................................................................ 7 4.1 4.2 EMC SPECIFICATION ............................................................................................................... 7 FCC requirements ........................................................................................................... 7 CISPR requirements ........................................................................................................ 8 AGENCIES CERTIFICATIONS ...................................................................................................... 8 Product safety compliance .............................................................................................. 8 4.1.1 4.1.2 4.2.1 5 MECHANICAL ........................................................................................................................... 8 6 CABLE(BOARD TO CONNECTOR) ........................................................................................ 9 7 COIL(SPEC) ................................................................................................................................ 9 ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 3 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET 1 SCOPE This document describes the basic electrical characteristics of WTM1B15 wireless power transmitter module. WTM1B15 is designed based on the technology of electromagnetic induction. It is a widely used module for many different applications. This is a new concept of charging devices without any wires and cords. 1.1 GENERAL DESCRIPTION WTM1B15 is a Wireless Power Consortium (WPC) Qi 1.2.4 compatible wireless power transmitter module. This transmitter module is Qi certified and can function with devices compatible to Qi standard. This excellent and highly integrated transmitter module is using magnetic induction process technology with stable performance and high reliability. This specification defines the performance characteristics ( include electrical function, EMC, safety, and product test requirements and so on) of a internal signal coil wireless charger (transmitter), which provide configurable charging mode to support WPC Qi 1.2.4 standard. 2 ELECTRICAL SPECIFICATION 2.1 DESIGN STANDARDS Transmitter MP-A11. WTM1B15 with follow WPC QI Wireless Power Transfer System Power Class 0 Specification Power
. ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 4 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET 2.2 INPUT REQUIREMENT The power supply must operate on a DC input voltage 19V with 5% tolerance. Input current should lower than 1A. Input Range Minimum Nominal Maximum 18.05 19 19.95 Unit Vdc Table 1 - Input Voltage Range 2.3 OUTPUT REQUIREMENT The wireless charger can support WPC qi V1.2.4 EPP 15W , downward support BPP 5W, Apple 7.5W, Samsung Fast Charge. The following specifications are defined with RX- WRM1A15 12V/1.25A 15W Output. 2.4 NO LOAD CONSUMPTION Load No Receiver Power consumption
< 0.5W Table 2 - No load consumption 2.5 EFFICIENCY The efficiency shall be 75% at 19V maximum loading, 12V/1.25A efficiency measurements are performed at coil center with 2mm vertical distance between TX coil and RX IDT P9221 COIL. Vin 19V Load 15W Efficiency 75%
Table 3 - Efficiency Receiver IDT P9221 2.6 FREQUENCY The Operating Frequency is 120~130 kHz ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 5 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET 2.7 INTERFACE SURFACE 2.7.1 DISTANCE the top face of the Primary Coil. Distance from the Primary Coil to the Interface Surface of the Base Station is dz = 2.0 mm across 2.7.2 WITHOUT METAL The Interface Surface of the Base Station extends at least 5.0 mm beyond the outer dimensions of the Primary Coil. 2.8 LED INDICATE LED*/Color Standby Transfer Charge Complete Fault Condition LED1-Amber OFF OFF OFF FOD
(Foreign Object Detection) Slow flash
(2 second period) for 60 seconds Overheat Solid ON for 60 seconds Fast Flash (1 second period) for 5 cycles. LED2-Blue OFF OFF OFF OFF BREATH (2-3 sec period) for 60 seconds, then shut OFF LED. BREATH (1 sec period) for 3 cycles. Table 4 - LED indicate ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 6 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET 3 ENVIRONMENTAL SPECIFICATION 3.1 COOLING Natural Air Cooling 3.2 TEMPERATURE Storage: -20 to 85 Operation within specification: -10 to 50 degrees C. Short Duration Storage Temperature Limits (ie. Shipping) -40 to +85 3.3 HUMIDITY Operation: 10% to 85% relative humidity, non-condensation. Storage: 10% to 85% relative humidity, including condensation. 3.4 CALCULATED MEAN TIME BETWEEN FAILURES (MTBF) Power Bank shall have a calculated MTBF of greater than 400,000 hours, calculated utilizing MIL-HDBK-217F with the following assumptions:
Output load: Rated full load Ambient temperature: 25 degrees C 3.5 WEIGHT
<100g 4 REGULATORY COMPLIANCE 4.1 EMC SPECIFICATION 4.1.1 FCC REQUIREMENTS WTM1B15 shall comply with the radiated and conducted emission requirements for FCC Part 15 Class B. ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 7 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET WTM1B15 shall comply with the radiated and conducted emission requirements for CISPR 22 Class B. The WTM1B15 is designed to meet Comply to WPC QI V1.2.4 EPP compliance testing, and will also be 4.1.2 CISPR REQUIREMENTS 4.2 AGENCIES CERTIFICATIONS tested by the relevant verification unit 4.2.1 PRODUCT SAFETY COMPLIANCE Certification FCC(option) NCC(option) Certification CE(option) BSMI(option) WPC QI EPP(option) Table 5 - safety compliance 5 MECHANICAL Refer to drawing ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 8 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET 6 CABLE(BOARD TO CONNECTOR) 7 COIL(SPEC) a.) OPERATING TEMPERATURE RANGE: -25~+85 b.) STORAGE TEMPERATURE RANGE: -40~+85 ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 9 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET NCC LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following Contains TX FCC ID: 2AC3UWTM1B15.
,: Intel :
ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 10 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET Additional testing, Part 15 Subpart B disclaimer The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. Applicable rule part The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. This module has been tested and found to comply with the following requirements for Modular Approval. Part 15.209 Radiated emission limits; general requirements. Part 15.215 Additional provisions to the general radiated emission limitations. ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 11 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET This device uses various test mode programs for test set up which operate separate from production firmware. Host integrators should contact the grantee for assistance with test modes needed for module/host compliance Test Modes test requirements. Limited Module This modular is a limited single modular as without its own RF shielding. This module must be evaluated when being installed in hosts that to ensure compliance of rule Part 15 B and C; host manufacturer have to consult with module manufacturer for the module limiting conditions when integrate the module in the host. Module manufacturer should reviews detailed test data or host designs prior to giving the host manufacturer approval. Antenna A permanently attached coil antenna is approved for use with this module. FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 15 cm between the radiator and your body. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following Contains TX FCC ID: 2AC3UWTM1B15.
,: Intel :
ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 12 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET
() 109 10 14
() Product Name of Module:
() NCC ID of Module:
Item Type of Host Intel wifi 6 AX201 D2W
() Brand of Module:
Intel
() Model Number/Name of Module:
AX201 D2W Brand of Host Model Number/Name of Host
Produce Marking Name of Host Intel(R) Client Systems Intel(R) Client Systems Intel(R) Client Systems Intel(R) Client Systems Intel(R) Client Systems Intel(R) Client Systems Intel(R) Client Systems Intel(R) Client Systems Intel(R) Client Systems Intel Intel Intel Intel Intel Intel Intel Intel Intel NUC11PAQ NUC11PAQi7 NUC11PAH NUC11PAHi7 NUC11PAK NUC11PAKi7 NUC11PAQ NUC11PAQi5 NUC11PAH NUC11PAHi5 NUC11PAK NUC11PAKi5 NUC11PAQ NUC11PAQi3 NUC11PAH NUC11PAHi3 NUC11PAK NUC11PAKi3
() 1 2 3 4 5 6 7 8 9 ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 13 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 14 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 15 of 16 MODEL NOWTM1B15 Transmitter of WPC QI EPP ENGINEERING SPECIFICATION SHEET ISSUE DATE: 2020-2-19 Revision No.: 0.1 Specification No: WTM1B15 Page: 16 of 16