. Gamepad Calibration. This wireless gamepad need no calibration, there is an exclusive driver for this gamepad along with the software installed in your PC. This driver'provides you the convenience to start game play right away once the software and hardware installation are completed. Instant Game play Access The GameWizard starts to run automatically each time when you boct your computer. It appears as an icon in the Start Tray, for your instant access game play at anytime as you want. For more details about software operation, please refer to the Help / e-manual inside the CD, or the online manual in the GameWizard to get sufficient information. Directional Pad (D-Pad) This USB Cyber Voyager game pad equipped with the ultra sensitive directional pad, which offers precise centering and 360-degree movement for your instant maneuver jn gaming. Quick-response Action Triggers There are 2 action triggers positioned at the front of this gamepad, these triggers provide you perfect efficiency in game control. You may program these triggers through the game software or GameWizard as the extra directions control (e.g. the vertical step movement in 3D games) or the prompt firing trigger for individual weapons. Functioning Buttons There are 12 independent functioning buttons equipped on the up side of gamepad control panel, Such button numbers are sufficient enough for you to control the pop games. You may customize these buttons as different movements, acts or weapons control through the game software or GameWizard to approach the best gaming performance. LED Indicators The LED indicator of the receiver is always ON when it have been connected to a USB port, while the LED indicator of the gamepad will only flash when any buttons or D-pad is push to function. Channel Selector (None for 433MHz). The channel selector avails dual player to operate a game software at the same time. Its frequency is preset to accept any interference received, including interference that may cause undesired operation:
If the receiver is set at Channel A, then the gamepad should be set at Channel A. This logic ts applicable for dual player having a second set of Cyber Voyager Gamepad, at this time, the second device is to be set at Channel B.