FCC ID: 2A2INCQ-133 Remote control car series

2 @ AGhz REMOTE CONTROL Indicator Uses 3.7V Ni-Cd Battery

(incLUbED) bo aaisv -R Forward

= aai.sv-6) well Control Turn right Control Turn left Control Control Uses 2X1.5V AA Size Batteries (Not Included) a P> <q Car Connector Right drift How to Operate 1 How to Operate 2 How to Operate 3 How to Operate 4 Forward & Backward Control drift Left and Right Control drift Press and Hold To drift Left i Right Spin Left joystick 7 Press and Hold Left Spin g P OP F LEFT drift button for forward ) Right joystick DOWN &

To drift Right Press and Hold Left joystick Press and Hold DOWN I RIGHT drift button for backwards ) How to Operate 7 How to Operate 8 Bottom Left 45 Control drift Bottom Right 45 Control drift Hold Right joystick Hold Left Hold Right joystick and Left Hold Right joystick and Left joystick Down Hold Left ;

joystick Down Hold Right ) joystick The statements should be displayed in the user manual:

changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate Pera seies saan radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: The device has been evaluated to meet general RF exposure requirement. The device can

~Reorient or relocate the receiving antenna. bbe used in portable exposure condition without restriction.

~ Increase the separation between the equipment and receiver.

~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

~ Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Item NO:co.0084 Product Name: Remote control car series

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Label Size:5cm*2cm FCC ID:2A2INCQ-133 Label Size:5cm*1.5cm

DATE : 2021-07-28

Federal Communications Commission

Authorization & Evaluation Division

7345 Oakland Mills Road

Columbia, Maryland 21046

Authority to Act as Agent

On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No.

123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road,

Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this

application for equipment certification. I certify that submitted documents properly describe

the device or system for which equipment certification is sought. I also certify that each

unit manufactured, imported or marketed, as defined in the Federal Communications

Commission’s regulations will have affixed to it a label identical to that submitted for

approval with this application.

For instances where our authorized agent signs the application for certification on our

behalf, I acknowledge that all responsibility for complying with the terms and conditions

for certification, still resides with CHEN QI TOYS FACTORY and CHENGHAI DISTRICT,

SHANTOU, GUANGDONG, China

Signature:

Name: WEIDA CAI

Title: Manager

Company: CHEN QI TOYS FACTORY

CHEN QI TOYS FACTORY

DATE : 2021-07-28

Equipment Autorisation Division

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046

FCC ID: 2A2INCQ-133

Product Name: Remote control car series

Request for Confidentiality

To Whom It May Concern,

Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and

§0.459, we are requesting the Commission to withhold the following attachment(s) as

confidential documents from public disclosure indefinitely.

These documents contain detailed system and equipment descriptions and are

considered as proprietary information in operation of the equipment. The public

disclosure of these documents might be harmful to our company and would give

competitors an unfair advantage in the market.

In additional to above mentioned documents, in order to comply with the marketing

regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204,

while ensuring that business sensitive information remains confidential until the actual

marketing of newly authorized devices, we request Short Term Confidentiality of the

following attachment(s);

Schematic Diagram

Block Diagram

Operational Description

External Photos

Test Setup Photos

Internal Photos

User Manual

OR

For 45 days, pursuant to Public Notice DA 04-1705.

For 180 days pursuantto KDB 726920 D01.

It is our understanding that all measurement test reports, FCC ID label format and

correspondence during the certification review process cannot be granted as confidential

documents and this information will be available for public review once the grant of

equipment authorization is issued.

Signature:

Name: WEIDA CAI

Title: Manager

Company: CHEN QI TOYS FACTORY

Differences Declaration To whom concern, We company CHEN QI TOYS FACTORY hereby declares: The product models CQ-133, CQ-131, CQ-132, 9802M, 9802M-1, 9802M-2, CQ-500, CQ-501, CQ-502, CQ-503, CQ-504, CQ-505, CQ-506, CQ-507, CQ-508, CQ-509, CQ-510, CQ-511, CQ-512, CQ-513, CQ-514, CQ-515, CQ-516, CQ-517, CQ-518, CQ-519, CQ-520, CQ-521, CQ-522, CQ-523, CQ-524, CQ-525, CQ-526, CQ-527, CQ-528, CQ-529, CQ-530, CQ-531, CQ-532, CQ-533, CQ-534, CQ-535, CQ-536, CQ-537, CQ-538, CQ-539, CQ-540, CQ-613, CQ-614, CQ-615, CQ-616, CQ-617, CQ-618, CQ-619, CQ-620, CQ-621, CQ-622, CQ-623, CQ-624, CQ-625, CQ-626, CQ-627, CQ-628, CQ-629, CQ-630, ZWD-005, ZWD-006, ZWD-007, ZWD-008, ZWD-009 are identical in the same PCB layout, interior structure and electrical circuits, The differences are appearance color and model name for commercial purpose. Authorized signature:

Date: 2021-07-28