Smart Cabinet Lock version1.0 Smart Cabinet Lock Release: version1.3 Date: 26-Aug-2019 CHENGDU HIZIMA TECHNOLOGY CO.,LTD D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA Peoples Republic of China Tel: (86) 28-87885966 Fax: (86) 28-87886166 Email: sales@hizima.com D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 1 / 25 Smart Cabinet Lock version1.0 Copyright Copyright2015, CHENGDU HIZIMA TECHNOLOGY CO.,LTD All Rights Reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Chengdu Hizima Technology Co., Ltd. and HIZIMA are trademarks or registered trademarks of CHENGDU HIZIMA TECHNOLOGY CO.,LTD of their respective owners. All other trademarks that may be mentioned in this document are the property The information in this document is subject to change without notice. In no event shall Hizima be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort
(including negligence or otherwise) arising in any way out of the use of this document or the related content on the website, even if advised of the possibility of such damage. Security Statement Important! Before powering on and starting any HIZIMA product, please read the security and compatibility information of the product. Environmental protection All HIZIMA products have been designed to comply with the environmental protection requirements. The storage, use, and disposal of HIZIMA product must meet the applicable national laws and regulations. D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 2 / 25 Smart Cabinet Lock version1.0 Document Description The words and graphs in the document are for description of HIZIMA products specification or features. Document Attributes Attribute Document topic Document No. Last update Document status Content Smart Cabinet Lock Data Sheet Oct. 15th, 2018 Released Revision Records Document Version Revision date Revise d by V1.0 V1.1 V1.1 V1.1 15-10-2018 ZHOU 27-12-2018 ZHOU 17-07-2019 ZHOU 26-08-2019 ZHOU Description Finish the first version data sheet Finish the revised version data sheet Finish the revised version data sheet Finish the revised version data sheet D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 3 / 25 Smart Cabinet Lock version1.0 Contact 1. Product Overview.................................................................................................... 6 1.1. Brief introduction to Hizima dual channel smart cabinet lock............................ 6 1.2. Key Features.........................................................................................................7 1.2.1. High Security................................................................................................ 7 1.2.2. Manageable..................................................................................................7 1.2.3. High Generality.............................................................................................7 1.3. Workflow............................................................................................................. 8 2. 3. Specification............................................................................................................ 8 Composition.............................................................................................................8 3.1. Cabinet lock body................................................................................................ 9 3.1.1. Parts list........................................................................................................9 3.1.2. Dimensions.................................................................................................10 3.2. Battery box.........................................................................................................11 3.2.1. Dimension of battery box...........................................................................12 3.2.2. Wiring......................................................................................................... 12 4. Installation............................................................................................................. 13 4.1. Adjustment for left opening door or right opening door.................................. 14 4.2. Adjustment for steel bolt...................................................................................14 4.3. Use the punch location paper template............................................................15 4.4. Three installation ways...................................................................................... 15 4.4.1. Standard installation.................................................................................. 15 4.4.2. Sprocket box type heighten installation.................................................... 17 4.4.3. Steel bolts heighten installation................................................................ 18 Exploded Diagram.....................................................................................................19 4.5. Battery Box.........................................................................................................20 4.5.1. Installation..................................................................................................20 4.5.2. Replacement of battery.......................................................................... 21 D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 4 / 25 5. Operation of unlock and lock................................................................................ 21 Smart Cabinet Lock version1.0 5.1. Appearance diagram..........................................................................................22 5.2. Unlock via smart key..........................................................................................22 5.3. Unlocking via Bluetooth.....................................................................................23 5.4. Restart................................................................................................................23 6. 7. Dos and don'ts....................................................................................................... 23 Order information................................................................................................. 24 D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 5 / 25 1. Product Overview 1.1. Brief introduction to Smart Cabinet Lock Smart Cabinet Lock version1.0 ZMB-2BK smart dual channel cabinet lock is a mechanical-electrical integration lock to install on cabinet. It has a built-in micro processor, working together with Hizimas centralized management Platform and APP to control access and realize remote authorization, centralized management, record traceable etc. functions. Its designed with two unlocking channels:
1. Unlock by Hizima smart key:It is not necessary to connect external power supply if adopt thisunlocking channel only. The smart key provides power supply to the lock When insert the key into it. It is especially suitable for all kinds of outdoor cabinets without external power supply or inconvenient wiring, etc. 2. Unlock through Bluetooth: This could be opened throughBluetooth without key. Through this channel, itneeds to connect external DC power supply. The operation on App and Platform to obtain authorization is same as unlocking by key channel. cabinet lock ZMB-2BK is designed with guards against technical unlock. If the smart key lost, the lock cylinder dont need to be changed, only need to disable the access authorization of the lost smart key from the central platform via APP. Also, it can D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 6 / 25 monitor the status of lock. If there is any anomaly, the acousto-optic indicators will alarm. Smart Cabinet Lock version1.0 1.2. Key Features 1.2.1. High Security Bidirectional encryption authentication security chip, no mutual opening rate, prevent technical unlock. Acousto-optic alarms in abnormal condition. Smart key cannot be duplicated. 1.2.2. Manageable Independent dual-channels control, two unlocking modes Bluetooth(requiring external electricity) and Smart key. Lock and unlock records controllable and traceable. Centralized authorization, and authorizing method is flexible and can be Support online and offline working mode and it can upload operation log combined. automatically. The key is universal. One Smart Key for multiple locks to improve work efficiency and reduce management cost. 1.2.3. High Generality Multiple installation way, adaptable to all cabinet types. Wide application, suitable for both indoor and outdoor environments. Easy to upgrade the mechanical cabinet locks installed on equipment cabinet\general cabinet\integrated cabinet to smart cabinet locks. Set Power mode and door magnetic mode via CMS configuration. D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 7 / 25 1.3. Workflow Smart Cabinet Lock version1.0 2. Specification Mode Input voltage Bluetooth Battery Smart key Logs Working Current Working environment Shaft force Material of body Ingress Protection Weight Length of cables Indicator ZMB-2BK DC 8V50VBluetooth mode BLE4.0 CR123A disposablelithium battery
(Bluetooth channel) Support 1000 unlocking currency<100mA Standby currency<8mA Temperature-30 ~ 65 Humidity 5 ~ 90%
30 N.m Zinc Alloy IP65 1.4kg 120cm Acousto-optic alarms Note: Please communicate with us if there is external standby power supply or a separate battery power supply requirement. 3. Composition D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 8 / 25 The ZMB-2BK Smart Cabinet Lock consists of a cabinet lock body and a power supply box. Both are connected by cables. Smart Cabinet Lock version1.0 It consists of the lock main body and parts. Different installation way needs different 3.1. Cabinet lock body parts. 3.1.1. Parts list No. Specification Materials Qty Items Lock body Handle Shaft limit block Lock body rubber pad Shaft washer Heighten washer A Steel bolt 184X48X40 Zinc Alloy 126.5*25*25.5 Zinc Alloy 20.3X2.5 184*48*1.2 18X11X1.2 19X11 72x65x4 7 Flat pad 5.3*20*1.2 M5X40 Cross hexagon combined screw M5X20 Cross hexagon combined screw Choose one according to real needs 5 Spring washer GB/T 93-1987 Steel bolt insert 72*65*4 Q235 Q235 Zinc Alloy Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel 1 1 1 1 1 1 1 1 1 1 2 4 2 1 1 1 1 Heighten washer B 19X11 Zinc Alloy 3 M5X20 Cross screw with pan head GB_T9074.8-1988
Long fixing clamp plate 44*46*18 Q235 Heighten frame 205*57*19 Zinc Alloy Heighten frame rubber pad 205*57*1.2 Silica gel Short fixing clamp plate A Short fixing clamp plate B 55*53*6 55*53*5 Q235 Q235 D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 9 / 25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 20 21 22 23 M5X16 Countersunk head cross screw GB819-85 Punch location paper template Q235 paper Smart Cabinet Lock version1.0 24 25 26 30 31 50 Adhensive strips Sprocket box Sprocket box fixing screw Cabinet door Parts of original cabinet lock Parts of original cabinet lock 2 1 1 2
3.1.2. Dimensions Dimension of standard lock installation and trepanning (without heighten frame):
Dimension of installation and trepanning with heighten frame D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 10 / 25 Smart Cabinet Lock version1.0 3.2. Battery box It consists of battery box and cuboids magnet. Its to provide power supply to the cabinet lock, by connecting with external DC power or installing disposable lithium battery, or use both at same time. Its preferred to use external DC power. The external DC power supply range is DC 8-50v, and the disposable D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 11 / 25 battery is DC 3V. Its recommended to use Panasonic CR123A. The battery box also equipped a reed switch to detect if the cabinet lock has been closed. Smart Cabinet Lock version1.0 3.2.1. Dimension of battery box 3.2.2. Wiring Old Version socket function remark P1 P2 Connect with DC power in cabinet 8V 50V. Note:
right DC positive electrode , according to marks onPCB. electrodeand left is is Negative Connect with the cabinet lock From left positive and door switch to right are power ground, power D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 12 / 25 New Version Smart Cabinet Lock version1.0 Front of PCB Back of PCB socket function remark P1 P2 Connect with DC power in cabinet 8V 50V. Note:
right DC positive electrode , according to marks onPCB. electrodeand left is is Negative Connect with the cabinet lock From left positive and door switch to right are power ground, power If the P1 socket is connected to the DC power supply of the cabinet, the switch K1 must be placed on the upper part, where is at the position of 8-50V, please check the picture Back of PCB. At this time, the DC power supply of the cabinet will be preferentially used, and it will automatically switch to the battery power supply when the DC power supply of the cabinet is cut off. If the DC power supply of the cabinet is not connected to the P1 socket, it is better to put the switch K1 at the bottom part, where is at the position of character CR123A position, then the battery has greater utilization. 4. Installation After the whole installation process is completed, the test should be carried out. During the test, the cabinet door should be opened for preliminary test. After the test D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 13 / 25 finished without problem, conduct the door opening and closing test to avoid the situation that the door cannot be opened due to wrong installation. Smart Cabinet Lock version1.0 4.1. Adjustment for left opening door or right opening door Change the installation direction of the shaft limit block 3 to adapt to the left opening door or the right opening door. Left opening Right opening 4.2. Adjustment for steel bolt The height between the steel bolt 7 and the cabinet door can be adjusted by changing the number proportion of the shaft washer 5 before or after the steel bolt 7 and increasing or decreasing the number of the heighten washer 6 and 12. D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 14 / 25 Smart Cabinet Lock version1.0 4.3. Use the punch location paper template If use heighten frame installation way, use the punch location paper template 25 to punch the cabinet door will save time. The step is: 1) embed the punch location paper template 25, lock body 1, heighten frame 20 to the original hole of cabinet door 50 to determine the position.2)peal off the cover of adhensive strips 26, and stick the template on the cabinet door 50. 3) punch holes according to the hole position and size on the paper template. If there are exact holes already existed on the lock, then no need to make it. 4.4. Three installation ways 4.4.1. Standard installation installation requirements. Exploded Diagram Suitable for the new cabinets or old cabinets with holes just matching with D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 15 / 25 Smart Cabinet Lock version1.0 Installation steps 1 2 3 4 Insert the lock body1,lock body rubber pad4 into the cabinet door50 from outside. Install Long fixing clamp plate14 on the lock body1, and tighten it with M5X20 Cross screw with pan head13. Install shaft washer5, Heighten washer A 6, Heighten washer B 12 on the lock body1 shaft in turn.For height adjustment, please refer to " 4.2.Adjustment for steel bolt" section. Then install steel bolt7, flat pad8, 5 Spring washer10 in turn, and tighten them with cross hexagon combined screw9.Left and right opening adjustment please refer to" 4.1. Adjustment for left opening door or right opening door"
section. 5 Installation finished. Check whether whether the installation is missing or wrong. Effect after installation:
D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 16 / 25 Smart Cabinet Lock version1.0 4.4.2. Sprocket box type heighten installation Suitable for the old cabinets which are the sprocket box type.
the corresponding accessories are not in the standard configuration.) Exploded Diagram Installation steps At the position that required to use heighten frame20on the cabinet door, punch6 6mm round holes at the six bumps position that contacted with the cabinet door. Hole size please refer to"higher installation punch holes and size" section, or use the the punch location paper template25 andrefer to" 4.3. Use the punch location paper template"section. Insert the lock body1,lock body rubber pad4,heighten frame20, Heighten 1 2 D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 17 / 25 Smart Cabinet Lock version1.0 frame rubber pad21 into the cabinet door50 from outside. Use Short fixing clamp plate A 22, Short fixing clamp plate B 23, to install on the lock body1, and tighten them with M5X16 Countersunk head cross screw and M5X20 Cross screw with pan head. Install the shaft washer5 on the lock body1. Finally, use Sprocket box fixing screw to fix the Sprocket box30 and other parts on Short fixing clamp plate A 22. Installation finished. Check whether whether the installation is missing or wrong. 3 4 5 6 Effect after installation 4.4.3. Steel bolts heighten installation Suitable for the old cabinets which are the steel bolts type. (the corresponding accessories are not in the standard configuration.) D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 18 / 25 Exploded Diagram Smart Cabinet Lock version1.0 Installation steps At the position that required to use heighten frame20on the cabinet door, punch6 6mm round holes at the six bumps position that contacted with the cabinet door. Hole size please refer to"higher installation punch holes and size" section, or use the the punch location paper template25 andrefer to" 4.3. Use the punch location paper template"section. Insert the lock body1,lock body rubber pad4, heighten frame20, Heighten frame rubber pad21 into the cabinet door50 from outside. Use Short fixing clamp plate A 22, Short fixing clamp plate B 23, to install on the lock body1, and tighten them with M5X16 Countersunk head cross screw and M5X20 Cross screw with pan head. Install the shaft washer5, Heighten washer A 6, Heighten washer B 12 on the lock body1 shaft in turn. Height adjustment please refer to 4.2. Adjustment for steel bolt. Then install steel bolt7, flat pad8, 5 Spring washer10 in turn, and tighten them with cross hexagon combined screw9.Left and right opening adjustment please refer to" 4.1. Adjustment for left opening door or right opening door" section. Installation finished. Check whether whether the installation is missing or wrong. 1 2 3 4 5 6
*** If the steel bolt7 provided by this product cannot meet the requirement of size during installation, the original steel bolt of the cabinet can be used. Effect after installation D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 19 / 25 Smart Cabinet Lock version1.0 4.5. Battery Box 4.5.1. Installation The magnet can be fixed on the door frame or other suitable position, and the battery box can be fixed by rivets and screw, or by foam gum (which should ensure long-term firm sticking). When the door is closed, the magnet should be aligned with the switch mark on the power box, and the distance is less than 5 mm. When the door is closed, the door switch and the power supply ground are short-circuited. When the door is open, the door switch and the power supply open. So the sensor is not installed properly, even if the cabinet door is completely closed, the cabinet lock will not turn off the power supply, especially in the case of battery power supply, the D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 20 / 25 battery power will rapidly decline. Smart Cabinet Lock version1.0 If this function is not used, the magnet should be fixed with tape at the reed mark on the battery box, and the installation of the battery box is not subject to the above restrictions. Also can disable the door magnetic function via CMS configuration 4.5.2. Replacement of battery
*** The positive and negative electrodes of the battery cannot be installed in reverse. They must be consistent with the mark on the PCB.
*** Under the circumstances of different temperatures and time consumption of each operation with lock, the lifetime of battery is different. When the remaining battery is lower than 20%, it is recommended to replace the battery immediately. 5. Operation of unlock and lock D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 21 / 25 5.1. Appearance diagram Smart Cabinet Lock version1.0 1Bluetooth antenna 2light indicator 3key hole 4handle 5dust cover6 smart key 7 Reset electrode 5.2. Configurable parameters This feature requires the software version greater than 0108. 5.2.1. Battery Parameters A. Battery mode: It has the lowest power consumption and is suitable for battery-only mode. The lock does not generate the lock record. Only generating the lock record, the power is turned off immediately after the lock is turned on, and there will be no prompt regards if lock is closed or not. B. External power supply mode/DC power mode: The power consumption is relatively high. It is suitable for the external DC power supply. The lock generates the locking and unlocking records. After the lock is opened, the power will not be turned off immediately. Only when the lock is closed, the power is turned off. C. Automatic mode: When the voltage is greater than 3V, it works in the external power supply mode/DC POWER, otherwise will be in the battery mode. 5.2.2. Door Magnetic Parameters Disabled: Door magnetism is not used as the basis for judging whether the lock is closed or not. Enabling: Door magnetism is used to judge whether the lock is closed or not. D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 22 / 25 5.3. Unlock via smart key Smart Cabinet Lock version1.0 1Insert the key6 into the key hole3 of the dust cover5, press it down, move the dust cover5 down, and insert the key6 into the key hole3 completely. 2According to different ways of unlocking, after the key lamp flickers (buzzer sounds), press the handle and hold for about 1 second. 3Release the handle4, the handle4 pop-upautomatically, wait about 2 seconds
(Please pay attention that you can't take off the key6 during this period, otherwise you may have a situation where the handle4 can't be closed. If it happens, press down the handle4 to remain closed, and then re-do a full unlocking operation to remove this abnormal state), and then press the key button to remove the key6, and dust cover5 automatically back. After that turn the handle4 to open the door. 4When users jobs finished, press down the handle4 and the lock will be locked automatically. 5.4. Unlocking via Bluetooth 1Gently press the handle4 then release to activate the power of the cabinet lock, the indicator light2 turns on. 2Connect APP with the lock (use APP to search the lock and connect), then the indicator light2 flashes. If the user does not use APP to connect with the lock for more than 30 seconds, the lock will automatically power off. 3The buzzer emits a short sound after APP sends an unlocking signal to the lock. If the handle4 is not in reset mode, the unlocking signal is invalid;
4Press the handle4 for about 1 second and release, the handle4 will automatically pops up. If this action is not done within 10 seconds, the lock will automatically lock up and power off. 5When users jobs finished, close the door and press down the handle4 and the lock will be locked up automatically, and the buzzer will ring for a short time then the lock power off. When the lock power is in battery mode, the power will be turned off immediately after the lock is unlocked, and there will be no buzzer prompt. In the case of lock crashing, use metal wire or metal things to short- circuit the two restart electrodes and then remove, and the restarting is completed. 5.5. Restart 6. Dos and don'ts 1Please do notexceed the limits specified in this specification when use the lock. D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 23 / 25 Smart Cabinet Lock version1.0 2Do not wrap or forcedly pull the powerwire, that may cause functional damage. 3In the process of installation, please take care to handle the parts gently,avoiding falling down to cause damage. 4 The product is non explosion-proof and cannot be used in inflammable and explosive environment. 5 Do not hit the lock bodyheavily; do not wipe the lock body withcorrosive materials. 6 If the battery is used, remove the battery as soon as possible after the battery is running up, in case the battery leakage damage the battery box. 7. Order information Product Name Item no. Description 6Smart Cabinet Lock ZMB-2BK Smart Cabinet Lock Warning conditions:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 1.This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. Any change or modification to the product not expressly approved by CHENGDU HIZIMA TECHNOLOGY CO.,LTD could void the user's authority to operate the device. RF Exposure Information and Statement This transmitter must not be in co-location or operating in conjunction with any other antenna or transmitter. This device complies with FCC RF radiation exposure limits set forth for an D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 24 / 25 uncontrolled environment.This device should be installed and operated with a minimum distance of 20cm between the device and your body. Smart Cabinet Lock version1.0 D2-2F, MOJU INDUSTRIAL PARK, #199, XIQU AVENUE, HI-TECH ZONE WEST, CHENGDU, SICHUAN, CHINA. 25 / 25