app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8
|
Effective |
2017-07-17
|
1 2 3 4 5 6 7 8
|
2016-08-04
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
Chengdu Idealsee Technology Co., Ltd.
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0025727249
|
1 2 3 4 5 6 7 8
|
Physical Address |
Tower B, New Hope Building, No.69, Tianfu No.3
|
1 2 3 4 5 6 7 8
|
Chengdu, N/A 610041
|
1 2 3 4 5 6 7 8
|
China
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
c******@telefication.com
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5 6 7 8
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8
|
Grantee Code |
2AI35
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
K2
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8
|
Name |
S******** W********
|
1 2 3 4 5 6 7 8
|
Title |
PM
|
1 2 3 4 5 6 7 8
|
Telephone Number |
13751********
|
1 2 3 4 5 6 7 8
|
Fax Number |
028-8********
|
1 2 3 4 5 6 7 8
|
E-mail |
w******@idealsee.cn
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6 7 8
|
Firm Name |
Shenzhen BALUN Technology Co., Ltd.
|
1 2 3 4 5 6 7 8
|
Name |
x**** w****
|
1 2 3 4 5 6 7 8
|
Physical Address |
Block B, FL 1, Baisha Science and
|
1 2 3 4 5 6 7 8
|
China
|
1 2 3 4 5 6 7 8
|
Telephone Number |
86-75********
|
1 2 3 4 5 6 7 8
|
Fax Number |
86-75********
|
1 2 3 4 5 6 7 8
|
E-mail |
x******@baluntek.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6 7 8
|
Firm Name |
Shenzhen BALUN Technology Co., Ltd.
|
1 2 3 4 5 6 7 8
|
Name |
T**** Z********
|
1 2 3 4 5 6 7 8
|
Physical Address |
Block B, FL 1, Baisha Science and
|
1 2 3 4 5 6 7 8
|
China
|
1 2 3 4 5 6 7 8
|
Telephone Number |
86-75********
|
1 2 3 4 5 6 7 8
|
86-75********
|
1 2 3 4 5 6 7 8
|
Fax Number |
86-75********
|
1 2 3 4 5 6 7 8
|
E-mail |
y******@baluntek.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 8 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 8 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 6 7 8 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Head-Mounted Virtual Reality Equipment |
1 2 3 4 5 6 7 8 | Head-mounted Virtual realiey equipment |
1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 8 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 8 | Original Equipment |
1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 | Grant Comments | Class II Permissive change: Minor circuitry of layout for non-transmitter portions is changed
Output power listed is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, and 5775 MHz. |
1 2 3 4 5 6 7 8 | Class II Permissive change: Minor circuitry of layout for non-transmitter portions is changed
Power output listed is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 | Class II Permissive change: Minor circuitry of layout for non-transmitter portions is changed. |
1 2 3 4 5 6 7 8 | Class II Permissive change: Minor circuitry of layout for non-transmitter portions is changed
Power output listed is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.
This device has 20/40 MHz bandwidth modes. |
1 2 3 4 5 6 7 8 | Power output listed is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.
This device has 20/40 MHz bandwidth modes. |
1 2 3 4 5 6 7 8 | Power output listed is conducted. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 | Output power listed is conducted. This is a portable device. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, and 5775 MHz. |
1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8
|
Firm Name |
Shenzhen BALUN Technology Co.,Ltd.
|
1 2 3 4 5 6 7 8
|
Name |
X****** W****
|
1 2 3 4 5 6 7 8
|
Telephone Number |
86-75********
|
1 2 3 4 5 6 7 8
|
Fax Number |
86-75********
|
1 2 3 4 5 6 7 8
|
E-mail |
x******@baluntek.com
|
|