FCC ID: 2BEDO-LK-IR Uncooled Infrared Thermal Imager

I 06 Specifications Model 384 640 Detector Uncooled VOx Microbolometer Resolution, pixels 384288 640512 ectiveLens (F1 .0) I 19mm 25mm 35mm 25mm 35mm Field of View 13.9 10.4 10.6 7.9 7.5 5.7 17.6 14.1 12.6 10.1 Visual Magnification 11.757.01 2.39.22 3.2312.911 1.355.4 1.897.56 Spectral Band 814m Pixel Size Frame Rate Hz NETD 12m 50Hz 35mk@300K Display 0.39" OLED 1024x7 68 Eyepiece Diopter Eye Relief 55 45mm Power Supply Two 18650 Lithium-ion Batteries Weight

(Including Battery) Time Standby Dimensions 770g 8h 2328162mm

(Including Eyepiece/Objective Lens Caps) Interface External Power/Type-

C Operation Temperature Protection Rating

-30C 55C IP67 Rel i a bi I ity 12009Shock Resistance Altitude 5000m Adaptability All-weather Detection

(Human) Range Detection ect) Range 19mm/800m 25mm/1040m 35mm/1460m 19mm/2430m 25mm/3200m 35mm/4480m Note: Due to continuous to modifications without improvements notification. product further and upgrades, parameters in the table may be subject 04 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information This device meets the government's requirements for FCC exposure limits set forth for an uncontrolled environment. This device was tested for typical body-worn operations with the back of the Uncooled Infrared Thermal lmager kept 0 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0 mm separa tion distance between the user's body and the back of the Uncooled Infrared Thermal lmager. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy thes e requirements may not comply with FCC RF exposure requirements, and should be avoided.

Page 1 of 1 FCC ID:2BEDO-LK-IR LABEL AND LOCATION Uncooled Infrared Thermal lmager Model: LK-IR FCC ID:2BEDO-LK-IR

(Size: L1.0cm x 2.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 1/25/2024 Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BEDO-LK-IR):

Name and company of U.S. agent:

FCC US Agent, LLC Physical U.S. address of agent:

3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent:

0033402884 Email address of U.S. agent:

Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd.. Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. with the FRN 0034698308 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Fei He Senior Sales Engineer Signature Tim Payne Manager Chengdu Jingpin Night Vision Optoelectronics FCC US Agent, LLC Technology Co., Ltd. 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2BEDO-LK-IR Model name LK-IR For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-01-24 Name / Title: Fei He / Senior Sales Engineer Company: Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. Address: Room 2102, 21/F, Building 2, No. 530, Middle Tianfu Avenue, Chengdu High-tech Zone, China (Sichuan) Pilot Free Trade Zone, Chengdu 610000, China Phone: +86-15818584319 Fax: N/A Email: fei.he@votinfrared.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. Address:

Room 2102, 21/F, Building 2, No. 530, Middle Tianfu Avenue, Chengdu High-tech Zone, China (Sichuan) Pilot Free Trade Zone, Chengdu 610000, China Phone: +86-15818584319 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-01-24 Name / Title: Fei He / Senior Sales Engineer Company: Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. Address: Room 2102, 21/F, Building 2, No. 530, Middle Tianfu Avenue, Chengdu High-tech Zone, China (Sichuan) Pilot Free Trade Zone, Chengdu 610000, China Phone: +86-15818584319 Fax: N/A Email: fei.he@votinfrared.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2BEDO-LK-IR We, applicant Model name LK-IR Company Name: Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. Address:

Room 2102, 21/F, Building 2, No. 530, Middle Tianfu Avenue, Chengdu High-tech Zone, China (Sichuan) Pilot Free Trade Zone, Chengdu 610000, China Phone: +86-15818584319 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-01-24 Name / Title: Fei He / Senior Sales Engineer Company: Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. Address: Room 2102, 21/F, Building 2, No. 530, Middle Tianfu Avenue, Chengdu High-tech Zone, China (Sichuan) Pilot Free Trade Zone, Chengdu 610000, China Phone: +86-15818584319 Fax: N/A Email: fei.he@votinfrared.com

Chengdu Jingpin Night Vision Optoelectronics Technology Co., Ltd. WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BEDO-LK-IR Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Fei He / Senior Sales Engineer Signature:

Phone: +86-15818584319 Email: fei.he@votinfrared.com Date: 2024-01-24 Page 1 of 1 Rev.2.0