VT-M2M-BTA-DE-A Users Manual 1 / 28 Chengdu Vantron Technology, Ltd. www.vantrontech.com 2 / 28 Table of Contents 1 2.1 2.2 Foreword ........................................................................................... 5 1.1 Copyright Notice ..................................................................... 5 1.2 Notes
............................................................................ 5
............................................................................ 6 1.3 Statement 1.4 Disclaimer
............................................................................ 6 1.5 Limitation of Liability/Non-warranty ...................................... 6 Safety Instructions ................................................................... 7 1.6 1.7
............................................................................ 7 Precautions Safety Instructions for Power Cables and Accessories ............ 7 1.8 1.9 Cleaning Instructions ............................................................... 8 2 Overview ........................................................................................... 9 Introduction ............................................................................ 9 Product Series .......................................................................... 9 2.2.1 Product Order Coding Rule ....................................... 9 2.2.2 Ordering Information .............................................. 10 3 VT-M2M-BTA-DE-A Hardware Instructions .............................. 11 3.1 Product Appearance ............................................................... 11 Top View .......................................................................................... 12 3.2 Specifications ......................................................................... 13 Interface Description .............................................................. 15 3.3 3.3.1 Wide-Range Power Interface ................................... 15 3.3.2 Ethernet Interface .................................................... 15 3.3.3 D Sub-9 RS232 Connector ...................................... 16 3.3.4 VGA Interface ......................................................... 18 3.3.5 USB Host Connector ............................................... 19 3 / 28 3.4 Operation Notice .................................................................... 20 3.4.1 Change SIM Card .................................................... 20 3.4.2 Power Supply .......................................................... 20 Tips .................................................................................................. 21 4 4 / 28 1 Foreword 1.1 Copyright Notice While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual. Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior notice. The latest version of this manual is at www.vantrontech.com.cn. Please contact Vantron for further information:
Vantron TechnologyVantron E-mail: sales@vantrontech.com The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron. Vantron reserves the right of all publicly-released copies of this manual. 1.2 Notes Applicable notes are listed in the following table:
5 / 28 Sign Notice Type Description Notice Important information and regulations Caution Caution for latent damage to system or harm to personnel It is recommended to read and comply with this manual before operating VT-M2M-BTA-DE-A which provides important guidance and helps decreasing the danger of injury, electric shock, fire, or any damage to the device. 1.3 Statement 1.4 Disclaimer Vantron assumes no legal liability of accidents resulting from failure of conforming to the safety instructions. 1.5 Limitation of Liability/Non-warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty. The VT-M2M-BTA-DE-A should be installed, debugged and maintained by professional people. The outside antennas are not permitted to be installed or to be changed by non-professional people. To run the device normally, only specify antennas are approved to be assembled together by professional people. Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor. 6 / 28 1.6 Safety Instructions Keep and comply with all operation instructions, warnings, and information. Pay attention to warnings on this device. Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any damage to the device. Operations and Service instructions are provided with the equipment. Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor. The maximum operation temperature is 61C. 1.7 Precautions screens. engine casing. Pay attention to the product labels/safety instructions printed on silk Do not try repairing this product unless declared in this manual. Keep away from heat source, such as heater, heat dissipater, or Do not insert other items into the slot (if any) of this device. Keep the ventilation slot ventilated for cooling. System fault may arise if other items are inserted into this device. Installation: ensure correct installation according to instructions from the manufacturer with recommended installation tools. Ensure ventilation and smoothness according to relevant ventilation standard. 1.8 Safety Instructions for Power Cables and Accessories Proper power source only Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source. 7 / 28 Use tested power source This product still contains a button lithium battery as a real-time clock after its external power source is removed and therefore should not be short-circuited during transportation or placed under high temperature. Place cables properly: Do not place cables at any place with extrusion danger. 1.9 Cleaning Instructions Please power off before cleaning the device. Do not use spray detergent. Clean with a damp cloth. Do not try cleaning exposed electronic components unless with a dust collector. Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults:
The device is damaged. The temperature is excessively high. Fault is still not solved after the operation according to the manual. 8 / 28 2 Overview 2.1 Introduction Thank you for choosing Vantron. It is our commitment to provide our valued customers with the embedded devices equipped with the state-of-the-art technology and the best product services. Vantrons VT-M2M-BTA-DE-A is based on the most advanced ARM and Intel Atom processors and has low-power consumption and high integration. The products are designed for applications of Gateway in industrials, medicals, financial, retail, vehicle, and transportations etc. 2.2 Product Series 2.2.1 Product Order Coding Rule VT-M2M-BTA-DE-A-S-1GM-16GF-GWZ-V Order Code Version:
I: Extended Temperature Blank:Commercial temperature Wireless Module Option:
G:4G , W: WiFi, M: mCARD, SD Memory Size: 16G: 16GB DDR Memory Size: 1G: 1GB, 2G: 2GB CPU Speed: S/D/Q: Single / Dual/ Quad 9 / 28 2.2.2 Ordering Information Order Examples:
VT-M2M-BTA-DE-A-S-2GM-16GF-
GWM-I ATOM Baytrail single Processor, 2GB DDR3L, 16GB SSD, 4G, WiFi, mCARD, extended temperature 10 / 28 3 VT-M2M-BTA-DE-A Hardware Instructions 3.1 Product Appearance Front View Rear View 11 / 28 Top View 12 / 28 3.2 Specifications Specifications CPU Processor Intel ATOM, E3815/1.46GHz, 512KB L2 cache per core Memory Display On Board RAM On Board DDRIII 1066MT/s , up to 2GB SSD Internal Half-Slim SSD Module Internal (16GB) Resolution Up to 2560x1600@60Hz for VGA Interface 1xVGA (DB15) WLAN Optional 802.11 b/g/n Wireless Module, external antenna , Support 1x Half PCIe Wireless card Wireless Communication 4G Module 1xPCIE 4G/LTE Cellular Module with SIM slot RF Module Zigbee Module with external antenna BT BT module, external antenna Ethernet 2x10/100/1000-BaseT(RJ45) USB 2xUSB2.0 Host (Type A) Audio HD Audio, 1xMIC in 3.5mm, 1xline Out 3.5mm COM Port 1xRS232/485/422(DB9 full function), 1xRS232/485(2 wires on Green Terminal) Peripheral Interfaces Alarm Buzzer Out SD card 1xSD card Slot RTC Supported Control Reset and On/Off Button on the top GPIO CAN Reserved GPIO (Terminal) 1x CAN2.0b 13 / 28 Accelerometer On Board Accelerometer, 3-Axis Security security Encrypt/Decrypt Chip DS28E01(Optional) On board Registration Serial Number, and SHA-1 OS Applications Optional TPM module Linux, XOS, Pakers pre-program golden image SDK Available Input DC12 / 24V(9-36V), Locked Power Jack Consumption 6W (Pulse10W), Sleep 2W. (without 4G,WLAN) Dimensions 176x101x52mm (Box) Install Brackets 198x101x52mm Weight 0.6Kg (1.2Kg package Kit) Enclosure Aluminum Alloy with Black Color Temperature Operating:-20C ~ +60C
( ETR:-40C ~ +80C Optional) Storage:-40C ~ +85C Humidity 5-95%RH at 25-35 (Non-Condensation) Cooling Mode Fan less, Heat Sink Approvals UL, FCC, IC, CE, RoHS, and PTCRB Compliance Software Power Mechanical Environment Condition 14 / 28 3.3 Interface Description 3.3.1 Wide-Range Power Interface Power JACK with lock Description DGND (ground pin) Power (+12 DC,UP to 36V) Pin 1,3 2 3.3.2 Ethernet Interface Standard RJ45 interface, supporting 10M/100M/1000M self-adaptation, this is a standard RJ45 ethernet port. 15 / 28 3.3.3 D Sub-9 RS232 Connector Standard vertical DB-9 male connector 1 2 3 4 5 6 7 8 9 Pin Description DCD1/422TX+/485_A RXD1/422TX-/485_B TXD1/422RX+
DTR1/422RX-
DGND (ground pin) DSR1 RTS1 CTS1 RI1 Remark s BIOS set BIOS set BIOS set BIOS set 16 / 28 RS232/485 ,CAN,External IO Connector 12pins 3.81 pitch terminal with screw lock Load capacity: more than 128 nodes/RS485 channel Pin 1 2 3 4 5 6 7 8 9 10 11 12 Remarks BIOS set BIOS set 3.3V Level 3.3V Level 3.3V Level 3.3V Level 3.3V Level 3.3V Level Description TXD2/485_2_A RXD2/485_2_B DGND CANH CANL DGND EXTIO0 EXTIO1 EXTIO2 EXTIO3 EXTIO4 EXTIO5 17 / 28 3.3.4 VGA Interface Standard vertical DB-15 Female VGA connector Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description RED GREEN BLUE N.C. GND GND GND GND
+5VDC GND N.C. SD_DDC HSYNC VHYNC SC_DDC 18 / 28 3.3.5 USB Host Connector Dual vertical USB A type interface, USB2.0 Pin A1 A2 A3 A4 B1 B2 B3 B4 Description USB1_VCC(+5VDC) USB1_DGND(ground pin) USB2_VCC(+5VDC) USB1_D-
USB1_D+
USB2_D-
USB2_D+
USB2_DGND(ground pin) Notes: Insert external device in USB1 connector should before powering up. 19 / 28 3.4 Operation Notice 3.4.1 Change SIM Card Push the small button on the left of SIM Card Holder, and install the SIM card to the holder. Then push the holder into the Slot. 3.4.2 Power Supply Please make sure using adapter in the accessory, or the power is not reversed when powered by other adapter. 20 / 28 4 Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister. Products or product packages with the sign of explosive should not be disposed like household waste but delivered to specialized electricalelectronic waste recycling/disposal center. Proper disposal of this sort of waste helps avoiding harm and adverse effect upon surroundings and peoples health. Please contact local organizations or recycling/disposal center for more recycling/disposal methods of related products. Comply with the following safety tips:
Do not use in combustible and explosive environment Keep away from combustible and explosive environment for fear of danger. 21 / 28 Keep away from all energized circuits. Operators should not remove enclosure from the device. Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the device. Do not change components unless the power cord is removed. In some cases, the device may still have residual voltage even if the power cord is removed. Therefore, it is a must to remove and fully discharge the device before contact so as to avoid injury. Unauthorized changes to this product or its components are prohibited. In the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help. Pay attention to caution signs. Caution signs in this manual remind of possible danger. Please comply with relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for operation environment. 22 / 28 Notice Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs. Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e-document, etc. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a 23 / 28 particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Any modification to the product is not permitted unless authorized by Vantron. Its not allowed to disassemble the product. It is not allowed to replace the system or change components unless with permission and certification. Please contact the technical support department of Vantron or local branches for help. 24 / 28 ISED statement This radio transmitter [IC:11152A-BTADEALP] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. cet metteur radio [IC:11152A-BTADEALP] a t approuv par l'innovation, science et dveloppement conomique canada pour fonctionner avec l'antenne types numrs ci - dessous, avec le gain maximal admissible.types de d'antenne n'est pas inclus dans cette liste qui ont un gain plus grande que le gain maximal indiqu pour tout type numres sont strictement interdits d'utilisation avec cet appareil. Mode Manufacturer Model Number Antenna Gain Impedance Antenna Antenna
(Max)
(Ohm) Connector Type Wi-Fi Communication YJ042S.100001.S02 2.0dBi 50 Reverse SMA male Monopole Dongguan YiJia Electronics Technology Co.,Ltd. Dongguan YiJia Electronics Technology Co.,Ltd. FULL RISE ELECTRONIC CO.,LTD Bluetooth Communication YJ042S.100001.S02 2.0dBi 50 Reverse SMA male Monopole Zigbee AN-AI-XOC 2.0dBi 50 Reverse SMA male Monopole LTE Main Asian Creation AC-Q7027-YZW
(698-960MHz) 50 SMA(Male) Monopole 3.0 dBi 5.0 dBi 25 / 28
(1710-2700MHz) 3.0 dBi
(698-960MHz) 5.0 dBi
(1710-2700MHz) Asian Creation AC-Q7027-YZW 50 SMA(Male) Monopole GPS NP002 28dBi 50 SMA(Male) Monopole Shenzhen Norminson Technology CO., LTD. This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Ce matriel est conforme aux normes RSS de l'Agence canadienne pour l'innovation, la science et le dveloppement conomique.Les oprations doivent satisfaire aux deux conditions suivantes:
1) Le dispositif ne risque pas de causer d 'interfrences; et 2) l'quipement doit accepter toute interfrence, y compris toute interfrence susceptible d'entraner une manipulation accidentelle de l'quipement. RF exposure warning This equipment must be installed and operated in accordance with 26 / 28 LTE Diversity provide instructions and the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operation in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. L 'installation et l' exploitation de l 'appareil doivent tre conformes aux spcifications et l' antenne utilise par l 'metteur doit rester une distance d' au moins 20 cm du propritaire et ne peut tre installe ou exploite avec aucune autre antenne ou metteur.Les utilisateurs finals et les personnes charges de l'installation doivent fournir une description de l'installation de l'antenne et des conditions de fonctionnement de l'metteur pour satisfaire aux exigences d'exposition aux radiofrquences. 27 / 28 US Office: Vantron Technology, Inc. Address: 440 Boulder Court, Suite 300, Pleasanton, CA 94566 Tel: +1 916-202-7042 Email: sales@vantrontech.com China Office: Chengdu Vantron Technology, Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China 610045 Tel: 86-28-8512-3930/3931, 8515-7572/6320 Email: sales@vantrontech.com.cn 28 / 28