9401-3HDT-V01 Hardware User Manual 9401-3HDT-V01
(Hardware) User Manual Product Version: 1.0 Date: Feb 1, 2023 For any question, please contact Chengdu Vantron Technology, Co., Ltd. Hardware User Manual VT-HMI101-RK68J-EVSE-L Copyright Vantron Technology Co., Ltd. All rights reserved. 2 9401-3HDT-V01 User Manual (HW) Change History This table describes the versions and release date. No. Version Author Date 1 1.0 Xiaojun Lu 2023/2/1 Description First release 1 9401-3HDT-V01 User Manual (HW) Table of Contents CHANGE HISTORY ..............................................................................................................................................1 TABLE OF CONTENTS ......................................................................................................................................... 2 1 FOREWORD ................................................................................................................................................4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 COPYRIGHT NOTICE ........................................................................................................... 4 SYMBOL CONVENTIONS ......................................................................................................4 STATEMENT ......................................................................................................................4 DISCLAIMER ..................................................................................................................... 4 LIMITATION OF LIABILITY/NON-WARRANTY ............................................................................4 SAFETY INSTRUCTIONS ....................................................................................................... 5 PRECAUTIONS ...................................................................................................................5 SAFETY INSTRUCTIONS FOR POWER CABLES AND ACCESSORIES ................................................. 5 2 OVERVIEW ................................................................................................................................................. 7 2.1 INTRODUCTION ................................................................................................................. 7 2.2 ORDER INFORMATION ........................................................................................................8 3 9401-3HDT-V01 HARDWARE INSTRUCTIONS .............................................................................................9 3.1 3.2 3.3 3.4 3.5 3.6 PRODUCT APPEARANCE AND INTERFACES .............................................................................. 9 FEATURES ...................................................................................................................... 10 BOARD DIAGRAM ............................................................................................................11 SPECIFICATIONS .............................................................................................................. 12 PART PLACEMENT ........................................................................................................... 13 DIMENSIONS .................................................................................................................. 13 4 HARDWARE DESCRIPTION ....................................................................................................................... 14 4.1 CONNECTOR IDENTIFICATION ............................................................................................ 14 4.1.1 Locate the Connector ...........................................................................................14 4.1.2 Confirm the Pin Direction .....................................................................................14 4.2 CONNECTOR DESCRIPTION ................................................................................................14 4.2.1 Power (DC 19V) Connector .................................................................................. 15 4.2.2 Ethernet (LAN) Connector ....................................................................................15 2 9401-3HDT-V01 User Manual (HW) 4.2.3 USB3.0 (USB3.0) JACK ..........................................................................................16 4.2.4 Video Output ........................................................................................................16 4.2.5 HDT-A Connector ................................................................................................. 17 4.2.6 HDT-B Connector ................................................................................................. 17 4.2.7 HDT-C Connector ................................................................................................. 18 4.2.8 HDT-D (OPT) Connector ....................................................................................... 19 4.2.9 WLAN RF .............................................................................................................. 19 4.2.10 PWR Button ...................................................................................................... 19 4.2.11 RESET Button .................................................................................................... 20 4.3 POWER CHARACTERISTICS .................................................................................................20 4.4 HARDWARE OPERATION NOTES .........................................................................................20 5 TIPS ..........................................................................................................................................................21 APPENDIX A: HOW TO CONTACT US ................................................................................................................24 3 9401-3HDT-V01 User Manual (HW) 1 Foreword 1.1 Copyright Notice While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual. Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior written notice. The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron. Vantron reserves the right of all publicly-released copies of this manual. 1.2 Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Type Description Notice Important information and regulations Caution Caution for latent damage to system or harm to personnel 1.3 Statement It is recommended to read and comply with this manual which provides important guidance and helps decreasing the danger of injury, electric shock, fire, or any damage to the device. 1.4 Disclaimer Vantron assumes no legal liability of accidents resulting from failure of conforming to the safety instructions. 1.5 Limitation of Liability/Non-warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if 4 9401-3HDT-V01 User Manual (HW) the device is still under warranty. 1.6 Safety Instructions Keep and comply with all operation instructions, warnings, and information. Pay attention to warnings on this device. Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any damage to the device. 1.7 Precautions Pay attention to the product labels/safety instructions printed on silk screens. Do not try repairing this product unless declared in this manual. Keep away from heat source, such as heater, heat dissipater, or engine casing. Do not insert other items into the slot (if any) of this device. Keep the ventilation slot ventilated for cooling. System fault may arise if other items are inserted into this device. Installation: ensure correct installation according to instructions from the manufacturer with recommended installation tools. Ensure ventilation and smoothness according to relevant ventilation standard. 1.8 Safety Instructions for Power Cables and Accessories Use proper power source only. Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source. Use tested power source. This product still contains a button lithium battery as a real-time clock after its external power source is removed and therefore should not be short-circuited during transportation or placed under high temperature. Place cables properly. Do not place cables at any place with extrusion danger. Cleaning Instructions Please power off before cleaning the device. Do not use spray detergent. 5 9401-3HDT-V01 User Manual (HW) Clean with a damp cloth. Do not try cleaning exposed electronic components unless with a dust collector. Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults:
The device is damaged. The temperature is excessively high. Fault is still not solved after the operation according to the manual. 6 9401-3HDT-V01 User Manual (HW) 2 Overview 2.1 Introduction Vantron offers Intel X86-based Single Boards Computer (SBC) platforms including Intel Atom APL-I E3900 series, Intel Atom Bay Trail E3800 series, Intel Atom Denverton C3000 series, Intel Core SKL i3-i7 series and Intel Core TGL i3-i7 series processor boards. In additional to offering the standard SBCs, we also provide professional customized board design services. Our seamless project management, efficient error-free development process, strong fundamentals in technology, sufficient human resources, and on-time delivery will guarantee the success in your project development. With the idea of Application Ready products and services, our embedded computers have embedded basic operation systems which include the drivers of its interfaces. So, it is easy to use and you only need to add your application software. It can speed Time to Market of your products, and save more cost. 7 9401-3HDT-V01 User Manual (HW) 2.2 Order Information Table 2-1 describes the order information. Table 2-1 Order Information Order Information 9401-3HDT-V01 X86 PCBA, I7-1195G7,8GB,128GB,4USB,1xLAN,HDMI,3xHDBase-T,RoHS 8 9401-3HDT-V01 User Manual (HW) 3 9401-3HDT-V01 Hardware Instructions 9401-3HDT-V01 is developed based on Intel Tiger Lake I7-1195G7 series. 3.1 Product Appearance and Interfaces Figure 3-1, Figure 3-2, and Figure 3-3 show the top view, right view, and front view of our products. Figure 3-1 Top View Figure 3-2 Right View Figure 3-3 Front View 9 9401-3HDT-V01 User Manual (HW) 3.2 Features The features of Vantron 9401-3HDT-V01 Board are listed in Table 3-1. Table 3-1 Features Features Processor, Intel Core, I7-1195G7, Quad core, 2.9GHz(5Ghz Turbo) Processor, Intel Core, I7-1185G7E, Quad core, 1.8GHz(4.4Ghz Turbo) 2xDDR4 SO-DIMM socket, default 8GB (up to 32GB supported) 1xM.2 M-KEY 2242/2280 Slot, SATA/PCIE protocol supported ;default 128GB SATA SSD 1xWireless-AC 9260 M.2 2230, 2x2 WiFi/BT, Gigabit 1xHDMI Connector 3 x HDBase-T Ports 2xUSB 3.0 Type-A 1x10/100/1000M Ethernet LAN port FTPM Supported RTC Supported Smart FAN Supported 15-36V Power Supply Win10 IoT Ent. /Win11 /Linux 10 9401-3HDT-V01 User Manual (HW) 3.3 Board Diagram Figure 3-4 shows the board diagram of our product. Figure 3-4 Board Diagram 11 9401-3HDT-V01 User Manual (HW) 3.4 Specifications Table 3-2 describes the CPU board specifications. Table 3-2 CPU Board Specifications Media Player Specifications System Processor RAM ROM Processor,
(optional I7-1185G7E) Intel Core, I7-1195G7, Quad core, 5.0GHz (Max) 2XDDR4 SO-DIMM (Default 8GB max 32GB) 1xM.2 M-key 2242/2280 SSD Slot (Support both SATA and PCIE bus, Default Capacity is 128GB) 1xSATA3.0 Connector Display Resolution Peripheral I/O LAN M.2 HDMI 1.4b 3840x2160@30Hz 3xHDBT 1920 x 1080 @ 60Hz 1x10/100/1000M Ethernet, RJ45 1xM.2 B-KEY,1xM.2 E-KEY Security 1xTPM USB Fan 2xUSB 3.0 Type-A 2xStandard Fan Connector Front Button 1xStandard Power/reset Button, LED Software Power RTC OS Input Supported Win10/Win11 or Linux 19V Power DC Input Consumption Max 60W Mechanical Dimensions 214 x 181 x 40mm Environment Condition Gross Weight TBD KG Temperature Operating: 0 ~ 35 Humidity 10-85%RH(Non-Condensation), operating and storage Cooling Mode Fan, heat sink Approvals RoHS compliance IP Level IP40 12 3.5 Part Placement Figure 3-5 and Figure 3-6 show positions of main ports. 9401-3HDT-V01 User Manual (HW) Figure 3-5 Part Top Figure 3-6 Part Bottom 3.6 Dimensions Figure 3-7 shows the dimensions of the media player. Figure 3-7 Dimensions Media player dimensions: 214.4 * 181 *40 mm 13 9401-3HDT-V01 User Manual (HW) 4 Hardware Description This chapter describes the hardware features such as switch, jumper, connector and PIN functions. The interface description is based on the connector sketch map. Necessary messages, such as pictures, are attached. 4.1 Connector Identification This section describes how to locate the connector and PIN1 on 9401-3HDT-V01 single computer board. 4.1.1 Locate the Connector Figure 3.6 shows the positions of main ports and connectors on the 9401-3HDT-V01. 4.1.2 Confirm the Pin Direction There is a pin number order in all Vantron products. Figure 4-1 indicates each pin's number, as shown on the top side (component side) of the main board. On a double-row connector, odd numbers and even numbers are placed in two rows separately. Confirm the Pin1 of the connector and jumper according to the below method:
Figure 4-1 Pin Number 1. Usually, there is a number or mark on the connector of the main board, such as trigonal mark. Dot and number "1" both indicate the pin1 of the connector. For the hole connector, you can see the pin number on the reversed side. Download the mechanical drawing of 9401-3HDT-V01 from Vantron technology or Vantron website:
2. 3. www.vantrontech.com. 4.2 Connector Description Table 4-1 and Table 4-2 describe the valid signal of the connector on the 9401-3HDT-V01 board. Table 4-1 Figure Type NC GND
P N Not Connect Ground Active low signal Positive of difference signal Negative of difference signal 14 9401-3HDT-V01 User Manual (HW) Table 4-2 Signal Type I O IO P A OD Input Output Input/output Power or ground Analog Open drain 4.2.1 Power (DC 19V) Connector Specifications: 2.5mmD, 5.5mmD, 5A, Male, RA, WDT, THR, RoHS CUIINC: PJ-082BH Pin Name Type Description 1 2 3
+VDC GND GND P P P DC-IN POWER +
Ground Ground 4.2.2 Ethernet (LAN) Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 When the yellow LED on the left goes on, it indicates LINK UP; when the light blinks, it indicates Activity. When the green LED on the right goes on, it indicates that the link speed is 100/1000M. Pin Name Type Description 1 2 L_MDI_0P L_MDI_0N IO IO Ethernet MDI0+ Signal Ethernet MDI0- Signal 15 9401-3HDT-V01 User Manual (HW) 3 4 5 6 7 8 L_MDI_1P L_MDI_2P L_MDI_2N L_MDI_1N L_MDI_3P L_MDI_3N IO IO IO IO IO IO Ethernet MDI1+ Signal Ethernet MDI2+ Signal Ethernet MDI2- Signal Ethernet MDI1- Signal Ethernet MDI3+ Signal Ethernet MDI3- Signal 4.2.3 USB3.0 (USB3.0) JACK Specifications: 3.0, Type A, 2 Port, female, 17.5mml, right angle, WDT, THR, RoHS FOXCONN: UEA1112C-8HS1-4F U116 USB3.0 JACK meets the standard USB3.0 PIN definition. 4.2.4 Video Output Specifications: Type-A, FLN, Female, Right Angle, WDT, SMT, RoHS MOLEX: 500254-1931 Pin Name Type Description 1 2 3 4 5 6 7 8 9 HDMI_DATA2+
GND HDMI_DATA2-
HDMI_DATA1+
GND HDMI_DATA1-
HDMI_DATA0+
GND HDMI_DATA0-
10 HDMI_CLK+
O P O O P O O P O O HDMI DATA Ground HDMI DATA HDMI DATA Ground HDMI DATA HDMI DATA Ground HDMI DATA HDMI CLK 16 9401-3HDT-V01 User Manual (HW) P O IO IO P P I Ground HDMI CLK HDMI DDC I2C CLK HDMI DDC I2C DATA Ground HDMI POWER +5V HDMI HOT PLUG DETECTION 11 12 13 14 15 16 17 18 19 GND HDMI_CLK-
NC NC HDMI_DDC_SCL HDMI_DDC_SDA GND VCC_HDMI HDMI_HPD 4.2.5 HDT-A Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 When the yellow LED on the left goes on, it indicates that the HDMI is active. When the green LED on the right goes on, it indicates that the HDBase-T is linked up. Pin Name Type Description 1 2 3 4 5 6 7 8 HDSRC_P0_R HDSRC_N0_R HDSRC_P1_R HDSRC_P2_R HDSRC_N2_R HDSRC_N1_R HDSRC_P3_R HDSRC_N3_R IO IO IO IO IO IO IO IO HDBT MDI0+ Signal HDBT MDI0- Signal HDBT MDI1+ Signal HDBT MDI2+ Signal HDBT MDI2- Signal HDBT MDI1- Signal HDBT MDI3+ Signal HDBT MDI3- Signal 4.2.6 HDT-B Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 17 When the yellow LED on the left goes on, it indicates that the HDMI is active. When the green LED on the right goes on, it indicates that the HDBase-T is linked up. 9401-3HDT-V01 User Manual (HW) Pin Name Type Description 1 2 3 4 5 6 7 8 HDSRC_P0_R HDSRC_N0_R HDSRC_P1_R HDSRC_P2_R HDSRC_N2_R HDSRC_N1_R HDSRC_P3_R HDSRC_N3_R IO IO IO IO IO IO IO IO HDBT MDI0+ Signal HDBT MDI0- Signal HDBT MDI1+ Signal HDBT MDI2+ Signal HDBT MDI2- Signal HDBT MDI1- Signal HDBT MDI3+ Signal HDBT MDI3- Signal 4.2.7 HDT-C Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 When the yellow LED on the left goes on, it indicates that the HDMI is active. When the green LED on the right goes on, it indicates that the HDBase-T is linked up. Pin Name Type Description 1 2 3 4 5 6 HDSRC_P0_R HDSRC_N0_R HDSRC_P1_R HDSRC_P2_R HDSRC_N2_R HDSRC_N1_R IO IO IO IO IO IO HDBT MDI0+ Signal HDBT MDI0- Signal HDBT MDI1+ Signal HDBT MDI2+ Signal HDBT MDI2- Signal HDBT MDI1- Signal 18 9401-3HDT-V01 User Manual (HW) 7 8 HDSRC_P3_R HDSRC_N3_R IO IO HDBT MDI3+ Signal HDBT MDI3- Signal 4.2.8 HDT-D (OPT) Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 When the yellow LED on the left goes on, it indicates that the HDMI is active. When the green LED on the right goes on, it indicates that the HDBase-T is linked up. Pin Name Type Description 1 2 3 4 5 6 7 8 HDSRC_P0_R HDSRC_N0_R HDSRC_P1_R HDSRC_P2_R HDSRC_N2_R HDSRC_N1_R HDSRC_P3_R HDSRC_N3_R IO IO IO IO IO IO IO IO HDBT MDI0+ Signal HDBT MDI0- Signal HDBT MDI1+ Signal HDBT MDI2+ Signal HDBT MDI2- Signal HDBT MDI1- Signal HDBT MDI3+ Signal HDBT MDI3- Signal 4.2.9 WLAN RF Specifications: SMA, WDT, SMT, RoHS 4.2.10 PWR Button Specifications: 7.5mm, 8.7mmH, WDT, SMT, RoHS CHA: C602B-5H7RFL-14-101 19 9401-3HDT-V01 User Manual (HW) 4.2.11 RESET Button Specifications: 7.3mm, 6.25mmH, WDT, SMT, RoHS CHA: CTSAB-62N-V 4.3 Power Characteristics For players only, the power supply is DC 12-36V. To use the 9401-3HDT-V01 player, the minimum adaptor power is 36W. For the best performance of player, we recommend the adaptor power should be 65W or above. For other external devices, the power consumption is related to connected device such as USB storage, HDMI, and HDBase-T. 4.4 Hardware Operation Notes a) Power preparations: Please confirm that the power input is 19V (12-36V) and the recommended current is 3.25A. Make sure the plugs are not connected reversely. b) Environments: For the assembled or debug platform, be sure that there is no risk of short circuit for the board and that ESD protections are taken. 20 9401-3HDT-V01 User Manual (HW) 5 Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister. Products or product packages with the sign of explosive should not be disposed like household waste but delivered to specialized electrical electronic waste recycling/disposal center. Proper disposal of this sort of waste helps avoiding harm and adverse effect upon surroundings and peoples health. Please contact local organizations or recycling/disposal center for more recycling/disposal methods of related products. Comply with the following safety tips:
Do not use in combustible and explosive environment Keep away from combustible and explosive environment for fear of danger. Keep away from all energized circuits. Operators should not remove enclosure from the device. Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the device. Do not change components unless the power cord is removed. In some cases, the device may still have residual voltage even if the power cord is removed. Therefore, it is a must to remove and fully discharge the device before contact so as to avoid injury. Unauthorized changes to this product or its components are prohibited. In the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help. Pay attention to caution signs. Caution signs in this manual remind of possible danger. Please comply with relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for operation environment. Notice 21 9401-3HDT-V01 User Manual (HW) Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs. Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e-document, etc. FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Exposure to radio frequency energy The radiated output power of this device meets the limits of FCC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a persons body. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED Canada compliance statement This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
22 9401-3HDT-V01 User Manual (HW)
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Exposure to radio frequency energy:
The radiated output power of this device meets the limits of ISED Canada radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a persons body. Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La bande 51505250 MHz est rserve uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Lexposition lnergie radiofrquence. La puissance de sortie rayonn de cet appareil est conforme aux limites de la ISDE Canada limites dexposition aux frquences radio. Cet appareil doit tre utilis avec une distance minimale de sparation de 20 cm entre lappareil et le corps dune personne. 23 Appendix A: How to Contact Us If you have any problems or suggestions, or want to know more about our products, visit www.vantrontech.com. US Office: Vantron Technology, Inc. Address: 440 Boulder Court, Suite 300, Pleasanton, CA 94566, USA Tel: 925-621-8758 Email: sales@vantrontech.com China Office: Chengdu Vantron Technology, Ltd Address: 6th Floor, 1st Building, No.9, 3rd Wu Ke East Street, Wu Hou District, Chengdu 610045, China Tel: 86-28-8512-3930/3931, 8515-7572/6320 Email: sales@vantrontech.com.cn 24