FCC ID: 2AAGE9260NG Media Player

9401-3HDT-V01 Hardware User Manual 9401-3HDT-V01

(Hardware) User Manual Product Version: 1.0 Date: Feb 1, 2023 For any question, please contact Chengdu Vantron Technology, Co., Ltd. Hardware User Manual VT-HMI101-RK68J-EVSE-L Copyright Vantron Technology Co., Ltd. All rights reserved. 2 9401-3HDT-V01 User Manual (HW) Change History This table describes the versions and release date. No. Version Author Date 1 1.0 Xiaojun Lu 2023/2/1 Description First release 1 9401-3HDT-V01 User Manual (HW) Table of Contents CHANGE HISTORY ..............................................................................................................................................1 TABLE OF CONTENTS ......................................................................................................................................... 2 1 FOREWORD ................................................................................................................................................4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 COPYRIGHT NOTICE ........................................................................................................... 4 SYMBOL CONVENTIONS ......................................................................................................4 STATEMENT ......................................................................................................................4 DISCLAIMER ..................................................................................................................... 4 LIMITATION OF LIABILITY/NON-WARRANTY ............................................................................4 SAFETY INSTRUCTIONS ....................................................................................................... 5 PRECAUTIONS ...................................................................................................................5 SAFETY INSTRUCTIONS FOR POWER CABLES AND ACCESSORIES ................................................. 5 2 OVERVIEW ................................................................................................................................................. 7 2.1 INTRODUCTION ................................................................................................................. 7 2.2 ORDER INFORMATION ........................................................................................................8 3 9401-3HDT-V01 HARDWARE INSTRUCTIONS .............................................................................................9 3.1 3.2 3.3 3.4 3.5 3.6 PRODUCT APPEARANCE AND INTERFACES .............................................................................. 9 FEATURES ...................................................................................................................... 10 BOARD DIAGRAM ............................................................................................................11 SPECIFICATIONS .............................................................................................................. 12 PART PLACEMENT ........................................................................................................... 13 DIMENSIONS .................................................................................................................. 13 4 HARDWARE DESCRIPTION ....................................................................................................................... 14 4.1 CONNECTOR IDENTIFICATION ............................................................................................ 14 4.1.1 Locate the Connector ...........................................................................................14 4.1.2 Confirm the Pin Direction .....................................................................................14 4.2 CONNECTOR DESCRIPTION ................................................................................................14 4.2.1 Power (DC 19V) Connector .................................................................................. 15 4.2.2 Ethernet (LAN) Connector ....................................................................................15 2 9401-3HDT-V01 User Manual (HW) 4.2.3 USB3.0 (USB3.0) JACK ..........................................................................................16 4.2.4 Video Output ........................................................................................................16 4.2.5 HDT-A Connector ................................................................................................. 17 4.2.6 HDT-B Connector ................................................................................................. 17 4.2.7 HDT-C Connector ................................................................................................. 18 4.2.8 HDT-D (OPT) Connector ....................................................................................... 19 4.2.9 WLAN RF .............................................................................................................. 19 4.2.10 PWR Button ...................................................................................................... 19 4.2.11 RESET Button .................................................................................................... 20 4.3 POWER CHARACTERISTICS .................................................................................................20 4.4 HARDWARE OPERATION NOTES .........................................................................................20 5 TIPS ..........................................................................................................................................................21 APPENDIX A: HOW TO CONTACT US ................................................................................................................24 3 9401-3HDT-V01 User Manual (HW) 1 Foreword 1.1 Copyright Notice While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual. Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior written notice. The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron. Vantron reserves the right of all publicly-released copies of this manual. 1.2 Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Type Description Notice Important information and regulations Caution Caution for latent damage to system or harm to personnel 1.3 Statement It is recommended to read and comply with this manual which provides important guidance and helps decreasing the danger of injury, electric shock, fire, or any damage to the device. 1.4 Disclaimer Vantron assumes no legal liability of accidents resulting from failure of conforming to the safety instructions. 1.5 Limitation of Liability/Non-warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if 4 9401-3HDT-V01 User Manual (HW) the device is still under warranty. 1.6 Safety Instructions Keep and comply with all operation instructions, warnings, and information. Pay attention to warnings on this device. Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any damage to the device. 1.7 Precautions Pay attention to the product labels/safety instructions printed on silk screens. Do not try repairing this product unless declared in this manual. Keep away from heat source, such as heater, heat dissipater, or engine casing. Do not insert other items into the slot (if any) of this device. Keep the ventilation slot ventilated for cooling. System fault may arise if other items are inserted into this device. Installation: ensure correct installation according to instructions from the manufacturer with recommended installation tools. Ensure ventilation and smoothness according to relevant ventilation standard. 1.8 Safety Instructions for Power Cables and Accessories Use proper power source only. Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source. Use tested power source. This product still contains a button lithium battery as a real-time clock after its external power source is removed and therefore should not be short-circuited during transportation or placed under high temperature. Place cables properly. Do not place cables at any place with extrusion danger. Cleaning Instructions Please power off before cleaning the device. Do not use spray detergent. 5 9401-3HDT-V01 User Manual (HW) Clean with a damp cloth. Do not try cleaning exposed electronic components unless with a dust collector. Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults:

The device is damaged. The temperature is excessively high. Fault is still not solved after the operation according to the manual. 6 9401-3HDT-V01 User Manual (HW) 2 Overview 2.1 Introduction Vantron offers Intel X86-based Single Boards Computer (SBC) platforms including Intel Atom APL-I E3900 series, Intel Atom Bay Trail E3800 series, Intel Atom Denverton C3000 series, Intel Core SKL i3-i7 series and Intel Core TGL i3-i7 series processor boards. In additional to offering the standard SBCs, we also provide professional customized board design services. Our seamless project management, efficient error-free development process, strong fundamentals in technology, sufficient human resources, and on-time delivery will guarantee the success in your project development. With the idea of Application Ready products and services, our embedded computers have embedded basic operation systems which include the drivers of its interfaces. So, it is easy to use and you only need to add your application software. It can speed Time to Market of your products, and save more cost. 7 9401-3HDT-V01 User Manual (HW) 2.2 Order Information Table 2-1 describes the order information. Table 2-1 Order Information Order Information 9401-3HDT-V01 X86 PCBA, I7-1195G7,8GB,128GB,4USB,1xLAN,HDMI,3xHDBase-T,RoHS 8 9401-3HDT-V01 User Manual (HW) 3 9401-3HDT-V01 Hardware Instructions 9401-3HDT-V01 is developed based on Intel Tiger Lake I7-1195G7 series. 3.1 Product Appearance and Interfaces Figure 3-1, Figure 3-2, and Figure 3-3 show the top view, right view, and front view of our products. Figure 3-1 Top View Figure 3-2 Right View Figure 3-3 Front View 9 9401-3HDT-V01 User Manual (HW) 3.2 Features The features of Vantron 9401-3HDT-V01 Board are listed in Table 3-1. Table 3-1 Features Features Processor, Intel Core, I7-1195G7, Quad core, 2.9GHz(5Ghz Turbo) Processor, Intel Core, I7-1185G7E, Quad core, 1.8GHz(4.4Ghz Turbo) 2xDDR4 SO-DIMM socket, default 8GB (up to 32GB supported) 1xM.2 M-KEY 2242/2280 Slot, SATA/PCIE protocol supported ;default 128GB SATA SSD 1xWireless-AC 9260 M.2 2230, 2x2 WiFi/BT, Gigabit 1xHDMI Connector 3 x HDBase-T Ports 2xUSB 3.0 Type-A 1x10/100/1000M Ethernet LAN port FTPM Supported RTC Supported Smart FAN Supported 15-36V Power Supply Win10 IoT Ent. /Win11 /Linux 10 9401-3HDT-V01 User Manual (HW) 3.3 Board Diagram Figure 3-4 shows the board diagram of our product. Figure 3-4 Board Diagram 11 9401-3HDT-V01 User Manual (HW) 3.4 Specifications Table 3-2 describes the CPU board specifications. Table 3-2 CPU Board Specifications Media Player Specifications System Processor RAM ROM Processor,

(optional I7-1185G7E) Intel Core, I7-1195G7, Quad core, 5.0GHz (Max) 2XDDR4 SO-DIMM (Default 8GB max 32GB) 1xM.2 M-key 2242/2280 SSD Slot (Support both SATA and PCIE bus, Default Capacity is 128GB) 1xSATA3.0 Connector Display Resolution Peripheral I/O LAN M.2 HDMI 1.4b 3840x2160@30Hz 3xHDBT 1920 x 1080 @ 60Hz 1x10/100/1000M Ethernet, RJ45 1xM.2 B-KEY,1xM.2 E-KEY Security 1xTPM USB Fan 2xUSB 3.0 Type-A 2xStandard Fan Connector Front Button 1xStandard Power/reset Button, LED Software Power RTC OS Input Supported Win10/Win11 or Linux 19V Power DC Input Consumption Max 60W Mechanical Dimensions 214 x 181 x 40mm Environment Condition Gross Weight TBD KG Temperature Operating: 0 ~ 35 Humidity 10-85%RH(Non-Condensation), operating and storage Cooling Mode Fan, heat sink Approvals RoHS compliance IP Level IP40 12 3.5 Part Placement Figure 3-5 and Figure 3-6 show positions of main ports. 9401-3HDT-V01 User Manual (HW) Figure 3-5 Part Top Figure 3-6 Part Bottom 3.6 Dimensions Figure 3-7 shows the dimensions of the media player. Figure 3-7 Dimensions Media player dimensions: 214.4 * 181 *40 mm 13 9401-3HDT-V01 User Manual (HW) 4 Hardware Description This chapter describes the hardware features such as switch, jumper, connector and PIN functions. The interface description is based on the connector sketch map. Necessary messages, such as pictures, are attached. 4.1 Connector Identification This section describes how to locate the connector and PIN1 on 9401-3HDT-V01 single computer board. 4.1.1 Locate the Connector Figure 3.6 shows the positions of main ports and connectors on the 9401-3HDT-V01. 4.1.2 Confirm the Pin Direction There is a pin number order in all Vantron products. Figure 4-1 indicates each pin's number, as shown on the top side (component side) of the main board. On a double-row connector, odd numbers and even numbers are placed in two rows separately. Confirm the Pin1 of the connector and jumper according to the below method:

Figure 4-1 Pin Number 1. Usually, there is a number or mark on the connector of the main board, such as trigonal mark. Dot and number "1" both indicate the pin1 of the connector. For the hole connector, you can see the pin number on the reversed side. Download the mechanical drawing of 9401-3HDT-V01 from Vantron technology or Vantron website:

2. 3. www.vantrontech.com. 4.2 Connector Description Table 4-1 and Table 4-2 describe the valid signal of the connector on the 9401-3HDT-V01 board. Table 4-1 Figure Type NC GND

P N Not Connect Ground Active low signal Positive of difference signal Negative of difference signal 14 9401-3HDT-V01 User Manual (HW) Table 4-2 Signal Type I O IO P A OD Input Output Input/output Power or ground Analog Open drain 4.2.1 Power (DC 19V) Connector Specifications: 2.5mmD, 5.5mmD, 5A, Male, RA, WDT, THR, RoHS CUIINC: PJ-082BH Pin Name Type Description 1 2 3

+VDC GND GND P P P DC-IN POWER +

Ground Ground 4.2.2 Ethernet (LAN) Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 When the yellow LED on the left goes on, it indicates LINK UP; when the light blinks, it indicates Activity. When the green LED on the right goes on, it indicates that the link speed is 100/1000M. Pin Name Type Description 1 2 L_MDI_0P L_MDI_0N IO IO Ethernet MDI0+ Signal Ethernet MDI0- Signal 15 9401-3HDT-V01 User Manual (HW) 3 4 5 6 7 8 L_MDI_1P L_MDI_2P L_MDI_2N L_MDI_1N L_MDI_3P L_MDI_3N IO IO IO IO IO IO Ethernet MDI1+ Signal Ethernet MDI2+ Signal Ethernet MDI2- Signal Ethernet MDI1- Signal Ethernet MDI3+ Signal Ethernet MDI3- Signal 4.2.3 USB3.0 (USB3.0) JACK Specifications: 3.0, Type A, 2 Port, female, 17.5mml, right angle, WDT, THR, RoHS FOXCONN: UEA1112C-8HS1-4F U116 USB3.0 JACK meets the standard USB3.0 PIN definition. 4.2.4 Video Output Specifications: Type-A, FLN, Female, Right Angle, WDT, SMT, RoHS MOLEX: 500254-1931 Pin Name Type Description 1 2 3 4 5 6 7 8 9 HDMI_DATA2+

GND HDMI_DATA2-

HDMI_DATA1+

GND HDMI_DATA1-

HDMI_DATA0+

GND HDMI_DATA0-

10 HDMI_CLK+

O P O O P O O P O O HDMI DATA Ground HDMI DATA HDMI DATA Ground HDMI DATA HDMI DATA Ground HDMI DATA HDMI CLK 16 9401-3HDT-V01 User Manual (HW) P O IO IO P P I Ground HDMI CLK HDMI DDC I2C CLK HDMI DDC I2C DATA Ground HDMI POWER +5V HDMI HOT PLUG DETECTION 11 12 13 14 15 16 17 18 19 GND HDMI_CLK-

NC NC HDMI_DDC_SCL HDMI_DDC_SDA GND VCC_HDMI HDMI_HPD 4.2.5 HDT-A Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 When the yellow LED on the left goes on, it indicates that the HDMI is active. When the green LED on the right goes on, it indicates that the HDBase-T is linked up. Pin Name Type Description 1 2 3 4 5 6 7 8 HDSRC_P0_R HDSRC_N0_R HDSRC_P1_R HDSRC_P2_R HDSRC_N2_R HDSRC_N1_R HDSRC_P3_R HDSRC_N3_R IO IO IO IO IO IO IO IO HDBT MDI0+ Signal HDBT MDI0- Signal HDBT MDI1+ Signal HDBT MDI2+ Signal HDBT MDI2- Signal HDBT MDI1- Signal HDBT MDI3+ Signal HDBT MDI3- Signal 4.2.6 HDT-B Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 17 When the yellow LED on the left goes on, it indicates that the HDMI is active. When the green LED on the right goes on, it indicates that the HDBase-T is linked up. 9401-3HDT-V01 User Manual (HW) Pin Name Type Description 1 2 3 4 5 6 7 8 HDSRC_P0_R HDSRC_N0_R HDSRC_P1_R HDSRC_P2_R HDSRC_N2_R HDSRC_N1_R HDSRC_P3_R HDSRC_N3_R IO IO IO IO IO IO IO IO HDBT MDI0+ Signal HDBT MDI0- Signal HDBT MDI1+ Signal HDBT MDI2+ Signal HDBT MDI2- Signal HDBT MDI1- Signal HDBT MDI3+ Signal HDBT MDI3- Signal 4.2.7 HDT-C Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 When the yellow LED on the left goes on, it indicates that the HDMI is active. When the green LED on the right goes on, it indicates that the HDBase-T is linked up. Pin Name Type Description 1 2 3 4 5 6 HDSRC_P0_R HDSRC_N0_R HDSRC_P1_R HDSRC_P2_R HDSRC_N2_R HDSRC_N1_R IO IO IO IO IO IO HDBT MDI0+ Signal HDBT MDI0- Signal HDBT MDI1+ Signal HDBT MDI2+ Signal HDBT MDI2- Signal HDBT MDI1- Signal 18 9401-3HDT-V01 User Manual (HW) 7 8 HDSRC_P3_R HDSRC_N3_R IO IO HDBT MDI3+ Signal HDBT MDI3- Signal 4.2.8 HDT-D (OPT) Connector Specifications: standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G. UNE: B50 (02-41) G8-140-A123-B52 When the yellow LED on the left goes on, it indicates that the HDMI is active. When the green LED on the right goes on, it indicates that the HDBase-T is linked up. Pin Name Type Description 1 2 3 4 5 6 7 8 HDSRC_P0_R HDSRC_N0_R HDSRC_P1_R HDSRC_P2_R HDSRC_N2_R HDSRC_N1_R HDSRC_P3_R HDSRC_N3_R IO IO IO IO IO IO IO IO HDBT MDI0+ Signal HDBT MDI0- Signal HDBT MDI1+ Signal HDBT MDI2+ Signal HDBT MDI2- Signal HDBT MDI1- Signal HDBT MDI3+ Signal HDBT MDI3- Signal 4.2.9 WLAN RF Specifications: SMA, WDT, SMT, RoHS 4.2.10 PWR Button Specifications: 7.5mm, 8.7mmH, WDT, SMT, RoHS CHA: C602B-5H7RFL-14-101 19 9401-3HDT-V01 User Manual (HW) 4.2.11 RESET Button Specifications: 7.3mm, 6.25mmH, WDT, SMT, RoHS CHA: CTSAB-62N-V 4.3 Power Characteristics For players only, the power supply is DC 12-36V. To use the 9401-3HDT-V01 player, the minimum adaptor power is 36W. For the best performance of player, we recommend the adaptor power should be 65W or above. For other external devices, the power consumption is related to connected device such as USB storage, HDMI, and HDBase-T. 4.4 Hardware Operation Notes a) Power preparations: Please confirm that the power input is 19V (12-36V) and the recommended current is 3.25A. Make sure the plugs are not connected reversely. b) Environments: For the assembled or debug platform, be sure that there is no risk of short circuit for the board and that ESD protections are taken. 20 9401-3HDT-V01 User Manual (HW) 5 Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister. Products or product packages with the sign of explosive should not be disposed like household waste but delivered to specialized electrical electronic waste recycling/disposal center. Proper disposal of this sort of waste helps avoiding harm and adverse effect upon surroundings and peoples health. Please contact local organizations or recycling/disposal center for more recycling/disposal methods of related products. Comply with the following safety tips:

Do not use in combustible and explosive environment Keep away from combustible and explosive environment for fear of danger. Keep away from all energized circuits. Operators should not remove enclosure from the device. Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the device. Do not change components unless the power cord is removed. In some cases, the device may still have residual voltage even if the power cord is removed. Therefore, it is a must to remove and fully discharge the device before contact so as to avoid injury. Unauthorized changes to this product or its components are prohibited. In the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help. Pay attention to caution signs. Caution signs in this manual remind of possible danger. Please comply with relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for operation environment. Notice 21 9401-3HDT-V01 User Manual (HW) Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs. Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e-document, etc. FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Exposure to radio frequency energy The radiated output power of this device meets the limits of FCC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a persons body. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED Canada compliance statement This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

22 9401-3HDT-V01 User Manual (HW)

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Exposure to radio frequency energy:

The radiated output power of this device meets the limits of ISED Canada radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a persons body. Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La bande 51505250 MHz est rserve uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Lexposition lnergie radiofrquence. La puissance de sortie rayonn de cet appareil est conforme aux limites de la ISDE Canada limites dexposition aux frquences radio. Cet appareil doit tre utilis avec une distance minimale de sparation de 20 cm entre lappareil et le corps dune personne. 23 Appendix A: How to Contact Us If you have any problems or suggestions, or want to know more about our products, visit www.vantrontech.com. US Office: Vantron Technology, Inc. Address: 440 Boulder Court, Suite 300, Pleasanton, CA 94566, USA Tel: 925-621-8758 Email: sales@vantrontech.com China Office: Chengdu Vantron Technology, Ltd Address: 6th Floor, 1st Building, No.9, 3rd Wu Ke East Street, Wu Hou District, Chengdu 610045, China Tel: 86-28-8512-3930/3931, 8515-7572/6320 Email: sales@vantrontech.com.cn 24

Media Player Model:9401-3HDT-V01 FC Input:DC 19.2V, Max.60W Contains FCC ID:2AAGE9260NG seth tie, Contains 1C:11152A-9260NG (wet) os CSA C22.2 CAN ICES-3(B)/NMB-3(B) HVIN:9260NGW E113735 s NO.62368-1

1234567891012345678 9201234567 893012:

Tablet Model No.: VT-TAB10-APLKN Input: 12V===3A Powered by 7.4V Lithium battery C Contains FCC ID: 2AAGE9260NG Contains IC: 11152A-9260NG CAN ICES-3(B)/NMB-3(B)

c1-0L

oF iS ec fe]

4 TTT ey aaa aaa Aa i Gicors Ole ee? Glo ++ Olo+* Olle ++ Olle oe Gleesss

- Ol 4

[ili titabllalil Or daidat lide Le lit 7 i silatlataitaluallabi lil 4

Ty TTT : iW |

Closer ilililali Liilili

| slilili f

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontcch.com.cn Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-13-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AAGE9260NG Chengdu Vantron Technology Co., Ltd. ("the applicant")certifies that the equipment for which authorization is sought is notcovered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicantsignature)

(Applicant printed name)Xi Wang Rev 1/26/2023 Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontcch.com.cn Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-13-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AAGE9260NG Chengdu Vantron Technology Co., Ltd. (the applicant) (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing coveredequipment. Sincerely,

(Applicant signature)

(Applicant printed name)Xi Wang Rev 1/26/2023

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontcch.com.cn Federal Communications Commission Authorizatin and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-13-2023 SUBJECT: FCC Class II Permissive Change for FCC ID:2AAGE9260NG Original grant date: 4/12/2023 Applicant: Chengdu Vantron Technology Co., Ltd. Chengdu Vantron Technology Co., Ltd. requests a Class II Permissive Change for the above mentioned FCC Identifier. Change #1: This change is to request approval for mobileClass-Specific host product, Product Name:

Media Player, model number:9401-2HDT-V01, 9401-3HDT-V01. Antenna type is External Antenna. the antenna types are different and the gain value is smaller than the original. Radiated Spurious Emission testswas performed to verify RF compliance. Change #2: When modules are migrated to the host tablet, we use the SW to locking out WIFI 5G Band NUII-2A/2C, Other RF functions remain unchanged. Thank you Sincerely Clients name / title Xi Wang Contact information / address: Chengdu Vantron Technology Co., Ltd. /No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan.

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontcch.com.cn Date: 12-13-2023 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AAGE9260NG Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram, Schematics, OperationalDescription, software security information File Name Block Diagram, Schematics, OperationalDescription, software security information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Clients name / title Xi Wang Contact information / address: Chengdu Vantron Technology Co., Ltd. /No.5 GaoPeng Road, Hi-

Tech Zone, Chengdu, SiChuan. Rev 11/20/07

Chengdu Vantron Technology Co., Ltd. Date: 2023-12-6 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID:2AAGE9260NG To Whom It May Concern:

This letter is to ascertain thatChengdu Vantron Technology Co., Ltd./ No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan EUTMedia Player MODEL No.: 9401-2HDT-V01, 9401-3HDT-V01 Has been the units used for conducting FCC compliance testing, the SDoC part Have be tested by EMTEK (SHENZHEN) CO., LTD. If you have any question or concerns, pls. contact us. Sincerely, Drawn up in (type in location) Date (mm/dd/yyyy) Signature Shenzhen 12/6/2023 Family/Last Name and First/Given Name Position/Title Manufacturer Or Applicant/Agent Name Lisa Wang Manager EMTEK (SHENZHEN) CO., LTD.

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontcch.com.cn Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; The diference are showed in the following : the 9401-3HDT-V01 has three HDBase-T ports, and the 9401-2HDT-V01 has two HDBase-T ports.. Model no. Model no. 9401-2HDT-V01 9401-3HDT-V01 Difference Confirmed by Chengdu Vantron Technology Co., Ltd. FCC ID: 2AAGE9260NG IC: 11152A-9260NG Product Name: Media Player Model Number: 9401-2HDT-V01, 9401-3HDT-V01 HVIN: 9260NGW Clients name / title Xi Wang Contact information / address: Chengdu Vantron Technology Co., Ltd. /No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan. Date2023-12-15

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontcch.com.cn FCC Authorization Current Date: 2023-12-13 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We Chengdu Vantron Technology Co., Ltd. , the undersigned, Hereby authorizes Lisa Wang at EMTEK (SHENZHEN) CO., LTD. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by EMTEK (SHENZHEN) CO., LTD. on our behalf shall have the same effect as our own action. FCC ID: 2AAGE9260NG Product Name: Media Player Model Number: 9401-3HDT-V01, 9401-2HDT-V01 We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits,pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 u.s.c. 862. The effective date of this limited agency agreement is 2023-12-13.The limited agency agreement expires on 2024-1-30.unless sooner terminated or extended by written notice to EMTEK (SHENZHEN) CO., LTD. and the FEDERAL COMMUNICATIONS COMMISSIONS. Sincerely Yours, Clients Signature Clients Nameffitle: Xi Wang/VP

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontcch.com.cn Date: 12-13-2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AAGE9260NG FRN:0026257246 US Agent Attestation Statement / Part 2.911(d)(7) Chengdu Vantron Technology Co., Ltd.certifies, that as of 6-8-2023, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AAGE9260NG. Chengdu Vantron Technology Co., Ltd., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Chengdu Vantron Technology Co., Ltd. for FCC ID: 2AAGE9260NG. Designated Agent Information:

Company Name: Vantron Technology, Inc FRN: 0033500448 Address: 48434 Milmont Drive Fremont, CA 94538-7324, USA Contact Person: Fu xu Phone: (650) 422-3128 Email: x.fu@vantrontech.com Sincerely, Company: Chengdu Vantron Technology Co., Ltd. Designated Agent:Vantron Technology, Inc Company Representative: Xi Wang Signature: [Signature]

Designated Agent Representative: Fu xu Signature:

ATTESTATION STATEMENT Applicant: Chengdu Vantron Technology Co., Ltd. Add: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Tel: 86-28-8512-3930 Email: x.wang@vantrontech.com.cn Date: 2023-3-8 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref; Attestation Statements Part 2.91 1(d)(5)(), (ii) Filing FCC ID: 2AAGE9260NG Chengdu Vantron Technology Co., Ltd., (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. And Chengdu Vantron Technology Co., Ltd., (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signed by (printed name): Xi Wang Signature: A Ve wt

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontech.com.cn Current Date: 2023-5-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: FCC Class II Permission change for FCC ID: 2AAGE9260NG Original Grant Date: 04/12/2023 The major change filed under this application is:

1.Request approval for portable category specific host tablet, tablet model number -

VT-TAB10-APLKN with antenna, model number: YJS01.042.005.301A (WiFi MAIN Antenna ) and YJS01.042.005.302A (WiFi AUX Antenna) , manufacturer: Dongguan YiJia Electronics Communication Technology Co.,Ltd.;

2.Power reduction;

3.When modules are migrated to the host tablet, we use the SW to locking out WIFI 5G Band NUII-2A/2C and 160M mode, Other RF functions remain unchanged. RF output power, Radiation emissions and Conducted emissions were performed to verify RF compliance. For the changes listed above, SAR and RF test were performed to demonstrate the compliance. This authorization is valid until further written notice from the applicant. Please contact me if you have any questions or need future information regarding this application. Sincerely Yours, Clients Signature:

Clients Name/Title: Xi Wang/VP

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontech.com.cn FCC Authorization Current Date: 2023-5-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We Chengdu Vantron Technology Co., Ltd. , the undersigned, Hereby authorizes CHINA CERTIFICATION ICT CO., LTD (DONGGUAN) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by CHINA CERTIFICATION ICT CO., LTD (DONGGUAN) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients Signature Clients Name/Title: Xi Wang/VP QA-FR-170-B

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontech.com.cn Modular Approval Letter Date: 2023-5-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Chengdu Vantron Technology Co., Ltd., hereby request Modular Approval for Product: WLAN and BT, 2x2 PCIe M.2 2230 adapter card (Model number:

9260NGW), FCC ID: 2AAGE9260NG).The EUT meets all of the requirement for modular approval as detailed in FCC 15.212. the requirements is described below:

1. The modular has RF shielding, please refer to the EUT photo. 2. The modular transmitter has buffered modulation/data inputs, Buffered data inputs stage has been integrated in chip. 3. The modular transmitter has its own power supply regulation. Please refer to the schematic. 4. Comply with the antenna requirements of Section 15.203 and 15.204(c), This equipment have PCB antennas with maximum gain is 0.8dBi @BDR/EDR, Bluetooth LE ,2dBi @ Wi-Fi 5GHz.FPC antennas with maximum gain is 1.1dBi @ Wi-Fi 2.4GHz, If used different type or higher-gain antenna, that requires the submission of a Class II permissive change or new application. 5. The EUT was tested in a stand-alone configuration, please refer to setup photos exhibit for details. 6. The module labeled with its own FCC ID. 7. Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The necessary explanation to be complied with this requirement is contained in the user manual, band please refers to the User Manual. 8. Comply with any applicable RF exposure requirements. The module meets the requirements for a mobile/portable device that may be used at separation distances of more than 8mm from the human body. If the device built into another host as a portable usage, the additional RF exposure evaluation may be required as specified by2.1093. Sincerely, Clients Signature Clients Name/Title: Xi Wang/VP

U.S. AGENT LETTER OF ATTESTATION Date: 2023-3-8 FEDERAL COMMUNICATIONS COMMISSION Authorization and Eval 7435 Oakland Mills Road Columbia, MD 21046 ion Division Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AAGE9260NG Chengdu Vantron Technology Co., Ltd, (the Applicant) certifies that, as of the date of the filing of the application, Vantron Technology, Inc(U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Chengdu Vantron Technology Co., Ltd. (the Applicant )accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Vantron Technology, Inc (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: Vantron Technology, Inc Address: 48434 Milmont Drive Fremont, CA 94538-7324, USA FRN : 0033500448

(650) 422-3128 iil: x.fu@vantrontech.com Signed by (printed name): Xu Fu Siete: 8 Applicant: Chengdu Vantron Technology Co., Ltd. Add: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Tel; 86-28-8512-3930 Email: x.wang@vantrontech.com.cn Signed by (printed name): Xi Wany Signature:

Pie :

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontech.com.cn FCC Confidential Authorization Current Date: 2023-5-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of FCC ID: 2AAGE9260NG Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Software defined radio and security The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients Signature Clients Name/Title: Xi Wang/VP

Company Name: Intel Corporation Address: 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 United States Telephone: 803-315-6704 Email: steven.c.hackett@intel.com Re: Change of FCC Identification Authorization, FCC ID: 2AAGE9260NG Date: January 3, 2023 To Whom It May Concern:

This letter grants authorization for representatives of Chengdu Vantron Technology Co., Ltd. to apply to the FCC for a change in identification as specified under 47 CFR2.933 of the FCC rules. This authorization applies to Intel Corporation, WLAN and BT, 2x2 PCIe M.2 2230 adapter card, model:

9260NGW, FCC ID: PD99260NG, approved on 07/24/2017. We are aware that Chengdu Vantron Technology Co., Ltd. intends to market the above referenced product under their own FCC ID: 2AAGE9260NG, part number: 9260NGW. Sincerely, Clients Signature:

Clients Name/Title: Steven C. Hackett/ Product Regulations Engineer Phone: 803-315-6704 Email: steven.c.hackett@intel.com

Company Name: Chengdu Vantron Technology Co., Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China Telephone: 86-28-8512-3930 Fax No.: 86-28-8512-3935 Email: x.wang@vantrontech.com.cn Current Date: 2022-11-23 Change in FCC ID Request Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request to change in Identification. Dear Regulatory Authority, This Change of Identification request applies for a new FCC ID: 2AAGE9260NG as established in 47 CFR 2.933 (b) for a currently approved device. This application by Chengdu Vantron Technology Co., Ltd. will establish a new FCC ID: 2AAGE9260NG under Chengdu Vantron Technology Co., Ltd. grant code for purpose of marketing. The original grant to Intel Corporation will remain in effect. Per 2.933(b) 1. The original applicant is Intel Corporation. 2. The original identification is FCC ID: PD99260NG. 3. The Original grant date is 2017-7-24. 4. The equipment is electrically identical 5. The original test results are applicable and representative of this changed device Only applicant and identification are different. 1. The new applicant is Chengdu Vantron Technology Co., Ltd. 2. The new identification is FCC ID: 2AAGE9260NG. The following files are electronically submitted as attachments:

Authorization Letter from Original Grantee Change in ID Request Letter FCC ID Authorization letter FCC ID Label format and location This authorization is valid until further written notice from the applicant. Please contact me if you have any questions or need future information regarding this application. Clients Signature Clients Name/Title: Xi Wang/VP