FCC ID: 2AFENB981C Remote control

Ok Google Ok Google XGIMI Horizon Pro XGIMI Horizon Pro FCC Caution for remote control This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. IC Warning for remote control This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

45mm 45mm 100%

7 m m 7 m m 45*7mm0.2mm PET 40g~60g PANTONE Cool Gray 9C) 0.08mm CE5mm,CE 7mm 5mm 4.4mm 5mm 3.3mm 7mm 2mm 1mm 4mm 5.5mm 210-158456 200%

A4

: 1:1

: mm CA65 ROHS;PAHS;RECAH;

BPA 1.0

:1 of 1 11010514120006 20210421

Chengdu XGIMI Technology Co., Ltd. Agent Authorization Company: Chengdu XGIMI Technology Co., Ltd. Address: Building A4, Tianfu Software Park, High-tech zone, Chengdu, Sichuan, China Product Name: Remote control Model Number(s): B981C, B980C, B982C Product Description: Remote control We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Andy pan Date: 2021.04.25 Title:

Product safety engineer Company: Chengdu XGIMI Technology Co., Ltd.

Chengdu XGIMI Technology Co., Ltd. Authorization Letter We,

(the approval holder) Company name Chengdu XGIMI Technology Co., Ltd. Building A4, Tianfu Software Park, High-tech zone, Chengdu, Sichuan, China Addresss declare that the following representative (agent):

Name (person) Bovey Yang Company name Shenzhen STS Test Services Co., Ltd. Addresss 1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road, Fuyong Street, Baoan District, Shenzhen, Guangdong,China City Shenzhen China Country to act on our behalf on all matters concerning the application and documents submitted to Micom Labs for product certification below Product Description Remote control Type or Model(s) B981C, B980C, B982C Tradename or Brand(s) XGIMI Attestation:

City:

Date:

Name:

(this must be a person) Function:

Signature:

(or official company stamp) Chengdu 2021.04.25 Andy pan Product safety engineer

Differences Description We Chengdu XGIMI Technology Co., Ltd. state:

Product Remote control Model Name B981C, B980C, B982C Brand Name XGIMI FCC ID 2AFENB981C Only the model name is different, the others are the same. Sincerely, Company: Chengdu XGIMI Technology Co., Ltd. Title: Product safety engineer E-mail: andy.pan@xgimi.com Name: Andy pan Signature

Chengdu XGIMI Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021.04.25 Subject; Request for Confidentiality FCC ID: 2AFENB981C To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Andy pan Title: Product safety engineer