Quick Start Guide After the CD-ROM installation program, go to the equipment connection. Below are the two connection methods.
-Connection mode between Bluetooth and computer 1. Take out the USB receiver, insert it into the computer, and turn on the blue switch button on the product. 2. Open windows settings, select a device, enter the Bluetooth and other devices page, click and add Bluetooth and other devices, select the type of device to add, and select Bluetooth. Select X6 device to connect and enter password: 0000 Then the Bluetooth connection between the device and the computer has been completed.
-Connection mode between data cable and computer 1. Take out the equipment, use the data cable attached in the package to connect the equipment with the computer, and then turn on the blue switch button on the equipment. Then the connection between the equipment and the computer is completed. Quick Start Guide 1. Open the APP after install. 2. Connect the unit with power supply(some models like 605X do not have a power supply). 3. Connect the USB cable with your computer. 4. The software will automatically find the device and display message Device Online. 5. To read a card, click Read button. Swipe the magnetic card you want to read. The card data will be displayed at Track 1, Track 2 and Track 3. 6. To write a card, please input the data first, you can input the data manually or copy the data from a card. Click Write button. Swipe the magnetic card you want to write. The track data has been successfully written to the card. FAQ:
Q: I installed the software and connected the unit with my pc, got error message Device Not Found. A: Please try to reboot your PC. If this does not work, there should be some other software conflicted with this one, but we can not figure out the detailed problem at your PC. Please try it on anther system(PC). FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.