FCC ID: 2APRD-GEN3WIDE Pallet Tracker

User Manual Pallet Tracker Model:

Gen 3 Ultra Wide Brand: CHEP Minewing (Shenzhen) Electronics Integrated Co., Ltd CHEP Pallet Tracker User Guide CHEP Pallet Tracker Global location tracking device with the longest battery life Key benefits Helps track the pallets and goods loaded Customer can visualize the device and on pallets by providing real time location hence position of their asset on BXB and environment sensing data. Enterprise application call BRIX. Customer can use the data generated to Customizable User Interface and interface get more insight into their supply chain data visualization tool on BRIX can be flow and take actions to improve the used by customer to generate information efficiency of operation. as relevant to their specific use case. Device can be controlled and configured Each Ultra device fitted with replaceable using BRIX platform and APIs provided. battery and last for >5yrs with 12 standard Customer need to get license to BRIX AA Alkaline batteries. platform to access data from the devices. How is it used Use CHEP Pallet Tracker location tracking Platform and API to Track your valuable assets Track your shipments CHEP pallet tracker reports its current location on the scheduled interval along with sensor data. Each communication report from tracker to BRIX is called Ping and BRIX uses these Ping to create the journey using it preoperatory Asset journey algorithm. Customer can login on Asset tracking application module in the BRIX and the map. visualize the complete journey on Please in-between each Ping CHEP Pallet Tracker is in the sleep State, preserving the battery. track the device operation rules CHEP Pallet Tracker is intended for enterprise customers wanting their assets. to Customers with BRIX enterprise license will get access to Device management application to like configure logging frequency, ping transmit frequency and can choose the sensor to use like temperature, motion and magneto meter etc. Device can report sensor data every 5min. to once in 3day. Customer can enable the GPS if pallet is expected to work under clear sky. More reports per day shorter the battery life. Customer can monitor 1000s of devices in a comprehensive view on BRIX dashboard and can take corrective actions. CHEP pallet tracker uses Cellular, Wifi or GPS to determine its location and accuracy of location goes from coarse to accurate in the order. Customer can monitor the # of times each tracker has used Cellular, Wifi or GPS. Customer can see the data for only the devices allocated to its own account only but once the customer cancels its account, tracker data will no longer be visible even though device will continue to work &

report data. CHEP Pallet Tracker comes with technology specific global SIM card pre-installed. This SIM card works in designated countries on CatM or NB network while for other countries with no coverage for CatM or NB, it falls back to GSM coverage. Device can also communicate on Wifi provided the credentials for access are sent to device thru profile configuration. User can not originate the connection to CHEP Pallet tracker unless device wakes-up and contacts the cloud application over Wifi or Cellular. When tracker is not connected to network, it continues to store the data off-

line into its memory. Onboard memory on device can store the data worth 6months of sensor logs. CHEP pallet tracker acquires location using Cellular, Wifi and GPS. Logic is built into the device to attempt Wifi first, followed by Cellular and only if both dont result into any valid data, GPS is attempted. This logic is implemented to save power as GPS attempt is most power consuming. Wifi & Cell tower triangulation technology calculates the location of the device based on the location of the nearby cell towers or Wifi hotspots. These are not very accurate, an approximate horizontal positioning error for each type is showsn in the picture here. GPS is the most accurate but takes time and higher power to get a location fix. Overview Ultra-Short provides location and environment sensing for Brambles platform as clip-on device thru harness. Dimension

- Enclosure: 184mm x 16mm x 35mm Serial Number

- US/NA Series: 1190125xxxxx

- EU/Spain Series: 1193425xxxxx Operation the device

- Single tap button^ to Power-ON

- Hold button for 5s & release to Power-OFF

- Hold button for 10s to clear battery counters

(Power button accessible when enclosure is open) LED Indications

- Green LED when Power-ON

- Red LED when Power-OFF

- Flashing Red LED for device failure

- Flashing Blue LED when firmware upgrade Battery

- AA Batteries: 2 cells

- Type: Energizer L91 AA

- Estimated pings*: 1600 2100 on Cat-M network

- Estimated pings*: 1000 - 1200 on 2G Network Tracking

- GNSS: fully capable GNSS tracking module

- Network triangulation based on Cell ID

- Triangulation based on CAT-M/NB-IoT cell info

- Triangulation based 2G when CAT-M not available

- Wi-Fi MACIDs capture for location triangulation

- BLE beacon sniffing Physical Aspects

- Weight: 150g

- Enclosure Material: ABS + PC

- Ruggedization: IP67 per IEC standard 60529 Certifications

- FCC, CE, IC-ID, CE-UK Sensors

- Temperature (Resolution: 0.1C, Accuracy:

1.5C, Range: -40 to +125C)

- Accelerometer 3-axis, 16G

- Magnetometer 3-axis, 50 Gauss Communication

- CAT-M/NB-IoT with 2G fallback

- Wi-Fi and BLE

- RFID with EPC C1G2 (ISO 18000-6c) standard Configuration Update

- Key parameters can be configured through BRIX

- Publish Interval: 60 minutes to 24 hours

- Log Interval: 60 minutes to 24 hours Data transmission and storage

- Streams sensor data to BRIX cloud real-time^

- Offline logging of sensor data on built-in memory for up to 6 months when no network connectivity Operating Temperature

- -40C to +60C Built-in Antenna

- Cellular: SMD antenna with -2dBm gain

- BLE and Wi-Fi: PCB antenna with -2.95dBi gain Capabilities and Durability

- Device aware of its state when in

- CHEP SC | Non-CHEP Dwell | Transit

- Periodic capture of sensor data based on log

- Secure log file transmission over Wi-Fi and frequency Cellular

- Efficient power management with smart logic for location determination

- Over the air firmware upgrade: Wi-Fi

- Publish based on event triggers

- Accelerometer: Impact and movement trigger

- Temperature: out of bound condition Security cloud

- Encrypted communication between device &

- Encrypted bootloader and application firmware

- X.509 Public/Private key for device authentication

- SSL/TSL v1.1 based security over network

* Battery life can vary depending on Network availability, Signal Strength, Ping Type, Log Frequency, extreme temp and battery brand used. Danger: Never insert batteries on wrong polarity Always insert recommended batteries with correct polarity in the Ultra devices. Wrong polarity can lead to device heating up and potentially damaging the pallet and goods on it. Danger: Dont put devices in Microwave Devices should never be put in microwave, it will damage the device permanently and can lead to a fire or explosion. Warning: Always put devices in dormant mode for Air shipment Federal Aviation laws require all cellular devices must turn off cellular function for the entire flight duration. To comply, we must put devices in Dormant mode before shipment by air. Warning: Never throw devices in the fire Under any scenario, do not throw devices in fire. Devices are not designed to withstand excessive heat and if thrown into fire, may explode. Warning: Dont submerge the devices in water for long duration Device is certified for IP67, means may sustain partially submerged condition for a very short time, but long submersion (>30min.) will make the device nonoperational. Caution: Always use specified torque to mount the device Device is designed to withstand a specified mounting torque without cracking. Never apply more than the specified torque to mount/unmount devices and always use specific screw for fastening. Caution: Always attach the devices flushed to pallet edge Device must be mounted from the front and right at the edge (flushed) of the pallet. This allows the internal antenna to get maximum cellular signal for better communication. Hereby, Minewing (Shenzhen) Electronics Integrated Co., Ltd declare that the radio equipment type Pallet Tracker is compliance with Directive 2014/53/EU. The product supplied by AA alkaline batteries For this device, it should keep at least 20cm separation distance and the prohibition of operating to a person. Caution:

For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions. FCC Caution. operation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. RF warning for Mobile device:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

CHEP Agent Authorization Company: CHEP Address: 2901 Tasman Drive Suite 107 Santa Clara, CA 95054 Product Name: Pallet Tracker Model Number(s): Gen 3 Ultra Wide Product Description: Pallet Tracker FCC ID: 2APRD-GEN3WIDE We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Sandeep Bandil Title:

Vice President, IoT Edge Products Company: CHEP Date: 2021.12.14

CHEP FCC ID: 2APRD-GEN3WIDE Request for 2.933 Change in identification of equipment Date:2021.12.14 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject:

Reference:

Dear Sir/Madam,

(CHEP) requests a Change in Identification for a currently approved device. This application will establish a new FCC ID for purpose of marketing. The original Grant for (CHEP), under FCC ID: (2APRD-ULTRASHORT) with a Grant Date of

(12/13/2021) will remain in effect. An authorization letter from the original Grantee is attached. We attest that the equipment is electrically identical. Only the FCC ID is different.The original test results are applicable and continue to be representative of this device. The following files are provided as attachments:

Cover letter giving permission from original Applicant for Change in ID External photos showing no physical changes to this device New FCC identification label and its location. Thanks and Best Regards, Name;

CHEP Signature Sandeep Bandil Phone: 4082036612 Fax: 4082036612 Email: Sandeep.bandil@brambles.com

CHEP Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021.12.08 Subject; Request for Confidentiality FCC ID: 2APRD-GEN3WIDE To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure Part List External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Sandeep Bandil Title: Vice President, IoT Edge Products