FCC ID: 2AEHI-EB01 Elvie LIMA Breast Pump, Model EB01

 

Instructions

for Use

Thank you for choosing Elvie.

We’re pumped you’re here.

It’s our mission to create products that improve

women’s lives, so we hope Elvie Stride makes

a difference to yours.

Languages

English

Contents

1

1. Parts

1.1 Product description

1.2 Controls

2. Intended use

3. Safety

4. Getting ready

4.1 Charging

4.2 Taking Elvie Stride apart

4.3 Cleaning

4.4 Breast Shield sizing

4.5 Assembling Elvie Stride

4.6 Single-side pumping

5. Using Elvie Stride

5.1 Turning on Elvie Stride

5.2 Aligning your nipple

5.3 Finding the right in-bra fit

5.4 Starting your session

5.5 Modes and intensity settings

5.6 Automatic functions

5.7 Ending your session

5.8 Storing your milk

5.9 How to store Elvie Stride

6. Troubleshooting

7. Warranty

8. Product specifications

3

5

5

10

19

25

26

27

1

Additional help and support

The Pump with Elvie app can be downloaded from the

Apple App Store (for iPhone) or Google Play Store (for Android).

If you need any help with your Elvie Stride, please get in touch

with our Customer Care team. Visit elvie.com for their details.

For Customer Care contact details visit elvie.com

1. Parts

1.1 Product description

Elvie Stride is comprised of the parts and accessories

listed below. They can also be seen below and on page 4:

1 Hub

2 Cup Fronts

2 Cup Seals

2 Breast Shields (24 mm)

2 Caps

1 Tube Splitter

2 Short Tubes (for the Cups)

1 Long Tube (for the Hub)

1 Clip

1 Cover

2 Valves

2 Diaphragms

1 Charging Cable

Stopper

Cup Seal

Breast Shield

Getting started

1. Charge the Elvie Stride Hub

Plug in the Hub for five minutes to wake it up before

first use. Please note, Elvie Stride does not turn on while

it is charging. For more details, please read the Charging

section of this booklet.

2. Download the Pump with Elvie app

Download the Pump with Elvie app on your smart phone

to make use of your pump’s smart features:

•

•

•

Track sessions

Control Elvie Stride remotely

Personalize your pump preference settings

The Pump with Elvie app can be downloaded from

the Apple App Store (for iPhone) or Google Play Store

(for Android).

For the most up-to-date information on what devices

the app can be used with please visit elvie.com.

3. Learn how to set up your Elvie Stride

Read the Getting ready section of this booklet. It will take

you through cleaning, charging and finding your best fit.

4. Find out more

Find out what to expect from your first pumping session

by reading the Using Elvie Stride section of this booklet.

It will show you how to express with your Elvie Stride.

5. Get in touch

If you have any further questions, contact our Customer

Care team at elvie.com.

2

3

Diaphragm

Cup Front

Valve

Charging Port

Hub

Cap Seal

Cap

Cover

Clip

Short Tube

(for the Cups)

Tube Splitter

Tube Splitter

Stopper

Intensity Lights

Power

Intensity Settings

Charging Cable

Hub Connector

Long Tube (for the Hub)

1.2 Controls

Mode

Mode Light

Play/Pause

4

2. Intended use

Indications for use

The Elvie Stride is a breast pump to be used by lactating

women to express and collect milk from their breast. The

Elvie Stride is intended for a single user.

Operating life

The expected operating life of the replaceable, washable

components is six months. It is recommended that you

replace the washable components after long-term storage

or before pumping for your next child.

Contraindications

There are no known contraindications for use with

this product.

3. Safety

Warnings

Read all instructions before using. Elvie Stride is not

provided sterile. It must be cleaned and sanitized before

first use (see the Cleaning section).

It is recommended that you consult with a licensed

healthcare professional before using Elvie Stride if you

have an active implanted device that would be affected

by a magnetic field (e.g. pacemaker, implantable

cardioverter defibrillator).

When using electrical products, especially when children

are present, basic safety precautions should always be

maintained, including the following:

5

•

•

•

•

•

•

•

Never operate an Elvie Stride if it has been damaged,

is not working properly, or has been dropped into

water. If damage is found, immediately discontinue use.

In case of damage or wear, please replace parts

If the package appears damaged or tampered

with before use, do not use and contact our

Customer Care team

Do not submerge the Cap in water. It may be difficult to

dry and may risk liquid being sucked into the Hub

Regularly check that there is no residue or

condensation in the Tubes. The Tubes must be

completely dry before assembly; residue or

condensation can be drawn into the Elvie Stride Hub,

which could cause product failure. If there is milk in the

Tubes discontinue use, check the Diaphragm for damage

and contact Customer Care. If mold develops in the

Tubes, discontinue use and replace

Always inspect all parts before use for damage, liquid

and cleanliness. Elvie Stride must not be used if the

Diaphragm is damaged. A damaged Diaphragm risks

liquid being sucked into the Hub, which could

cause permanent damage resulting in no suction.

Keep sharp objects away from the Diaphragm

Do not immerse the Hub, Tubes, Tube Splitter

or Cap in water or other liquids. Wipe with a

clean, damp cloth

Do not drop or insert any foreign object into any

openings on the Hub and always close the

Charging Cap after charging

• Only use Elvie manufactured parts with Elvie Stride,

including the Charging Cable; do not substitute. Use of

accessories or cables other than those specified could

result in irreversible damage to your Hub

•

•

•

•

•

•

•

•

•

•

•

•

•

Elvie Stride is best paired with a charging adapter of

maximum output 5 V / 2.1 A or 10 W. See our website

FAQ for more information about charging Elvie Stride

During normal use, areas of the Hub may warm up

It is not necessary to have trained medical professionals

present during use/operation of this product

The Breast Shield is the part that should be

applied to the body

Do not store wet or damp parts, as mold may develop

Do not use flammable materials while using

Elvie Stride or connecting Elvie Stride to a charger

Elvie Stride should not be used while lying down,

engaging in strenuous activities or performing

activities with risk of harm such as operating

heavy machinery. Do not pump while driving

Do not pump until after giving birth, as breast

pumping can induce labor

Using a breast pump should not cause pain. Do not

try to express with an intensity setting that is too high or

uncomfortable. If excessive discomfort or pain is

felt during pumping, stop pumping, break the seal

around your nipple and discontinue the session

This product contains small parts, Tubes and a cable

that may present a hazard. Keep out of reach of children

Inspect for damage, clean and sanitize washable

components that come into contact with your

breast and breast milk prior to first use

Clean all parts that come into contact with your

breast and breast milk, and inspect for damage

after every use

This is a single-user product. Use by more than one

person may present a health risk and voids the warranty

6

7

• Only use Elvie Stride for its intended use as

described in this manual

•

Do not expose Elvie Stride or its components

to direct sunlight

Do not use Elvie Stride while sleeping or overly drowsy

• Wash your hands thoroughly with soap and water

•

•

•

•

•

•

•

•

•

•

Always break the seal around your nipple before

removing Elvie Stride from your breast

Do not wear Elvie Stride when not pumping

Elvie Stride and its components are not heat resistant.

Keep away from heat sources

Elvie Stride uses Bluetooth technology. Please follow

airline rules for the use of portable electronic devices

when flying. Furthermore, high altitudes, including

while in a pressurized aircraft cabin, will affect the

performance of Elvie Stride

Portable and mobile frequency communications

equipment can affect the Hub

Please note that the Pump with Elvie app is

not required to use Elvie Stride. In the case of

disconnection from the app all pump controls are still

accessible via the device

Precautions

Always ensure all parts are completely dry before

assembling. Any liquid left on the Diaphragm risks

being sucked into the Hub, which could cause

product failure

Do not use harsh chemicals to clean the Breast

Shield, Cup Front, Cup Seal, Valve or Diaphragm

Do not place the Hub in the fridge or freezer

before touching Elvie Stride, its components or your

breasts. Avoid touching the inside of the Cup Fronts

and Breast Shields

• Only use drinking-quality tap water or bottled water

for cleaning components that come into contact

with milk

Contact your healthcare professional if you express

minimal or no milk, or if expression is painful

For further assistance with correct Breast Shield sizing

and comfort, please see a lactation consultant or

breastfeeding specialist

Elvie Stride will not work when connected to the

charger; always disconnect Elvie Stride from the

charger and close the Charging Port

If stored at minimum or maximum storage

temperature (see Product specifications), when

removing from storage, please allow 24 hours

for the pump to reach normal operating

temperature before use

Do not attempt to reset the Hub during use

Take extra care when using Elvie Stride in the

vicinity of children

•

•

•

•

•

•

Please visit elvie.com for troubleshooting advice, including alerts,

warnings and how to factory reset Elvie Stride.

Please keep a copy of these instructions for future reference.

8

9

4. Getting ready

4.2 Taking Elvie Stride apart

To get the most from your pump, it’s really important to set

it up properly. This guide will show you how to assemble

your pump and how to customize it to fit your body.

1.

Remove the Cap. The Hub, Tubes and Cap must be

placed on a dry surface and kept away from water

Finger Grip

4.1 Charging

Plug in the Hub for five minutes to wake it up before first

use. The Hub will not turn on while it is charging. It takes

approximately two hours to fully charge the Hub,

although this can vary depending on your charging set up.

A full charge lasts approximately five 30 minute sessions.

Only use the Charging Cable provided in the box.

Battery low

Battery charging

Fully charged

2. Using the Finger Grips, pull the Cup Front away from

the Breast Shield

3.

Pull the Valve out of the Breast Shield. Then remove

the Diaphragm

Charge immediately after finishing your pumping session

if low battery is indicated.

Tip: Press the Mode button when the Hub is off;

the Intensity Lights will show how much battery is left.

Tip: Close the Charging Port before use to ensure the

Hub is as discreet as possible.

10

11

4.3 Cleaning

Before first use

Elvie Stride is not provided sterile. It must be cleaned and

sanitized before first use. Always disassemble the

components before cleaning or sanitizing. For additional

cleaning guidelines see the Center for Disease Control

website – https://www.cdc.gov/healthywater/hygiene/

healthychildcare/infantfeeding/breastpump.html

1.

Before first use, remove the Cup Seal by peeling it out

of the groove on the side. During normal cleaning this

Cup Seal can stay in place

2.

To replace, stretch the Cup Seal over the outer rim of

the Cup Front. Make sure it goes on with the ridges

facing outwards. Press along the groove, checking

that it is snugly in place all the way around

Non-washable components

Charging Port

Hub

Cap Seal

Cover

Clip

Short Tube

(for the Cups)

Tube Splitter

Tube Splitter

Stopper

Charging Cable

Hub Connector

Long Tube (for the Hub)

12

The Hub, Cap, Tubes, Tube Splitter, Cover and Clip are

non-washable components and should be kept dry.

They must not be microwaved. They can be wiped clean

with a damp cloth, but should not be submerged in water.

If the tubes are moldy, discard and replace immediately.

Washable components

Breast Shield

Stopper

Diaphragm

Cup Front

Cup Seal

Valve

Cap

Cleaning washable components that come into contact

with milk, as soon as possible after pumping, prevents the

buildup of dry milk residue. Residue can cause the growth

of bacteria that may be harmful to you and your baby.

Cleaning (before first use and after every use)

1.

Rinse in cold, clear water. Do not place the parts

directly in the kitchen sink for rinsing and washing.

Use a dedicated wash basin and brush for infant feeding

2. Wash in warm water using mild dish washing soap

3. Rinse with cold, clear water for 10 to 15 seconds

OR

Place on the top shelf of the dishwasher

13

Sanitizing (before first use

and subsequently once daily)

1. Sanitize parts in boiling water for five minutes

OR

Suitable for microwave, steam or cold water sanitization.

We do not recommend microwave or steam sanitizing for

more than five minutes.*

*Always refer to the manufacturer’s instructions

Drying

Place parts on a clean surface and air dry completely

before assembly.

4.4 Breast Shield sizing

Elvie Stride comes with two (24 mm) Breast Shields.

If needed (21 mm ) or (28 mm) Breast Shields are

available to purchase separately.

The Breast Shield creates a seal between your nipple and the

pump, and it is therefore important it fits well.

To check your size:

1.

2.

3.

Put the Breast Shield on with the sizing symbol

facing upwards, and place your nipple in the

center of the fit lines

The fit lines should align with the outside of your nipple

To comfortably pump on both sides, repeat this process

for both nipples to ensure you have the correct Breast

Shield size for each nipple

Nipple Tunnel

Elvie Stride Breast Shield

Breast Shield too small

Breast Shield correct fit

Breast Shield too big

Too small – buy (28 mm)

Too big – buy (21 mm)

14

15

Breast Shield correct fit

4.5 Assembling Elvie Stride

Wash hands thoroughly before you begin. Once the parts

have been cleaned and sanitized, make sure they are dry

and not moldy before putting them together. Pay extra

attention to the Diaphragm and ensure it is completely dry.

1.

Attach the Cover and Clip. Slide the Hub into the

Cover, ensuring the hole for the Hub Connector is

aligned with the hole on the Cover. Push the short

end of the Clip through the slot, and pull through

2. Push the Hub Connector firmly into the Hub,

ensuring that it is fully inserted

3.

Push the Valve and Diaphragm

onto the Breast Shield

4. Use your fingers to work the Diaphragm rim over

the Breast Shield lip. Take a moment to check the

Diaphragm is sitting flush and is on securely

Breast Shield lip

Diaphragm rim

Frosted lip

5.

Push the Breast Shield and the Cup Front together

using the markings as a guide. Ensure that there is a

good seal all the way around. Check that there are

no gaps and that the Cup Seal is fully covered by the

frosted lip of the Breast Shield

6. Check that the Diaphragm is completely dry because

moisture can be sucked into the Hub. This will affect

performance. Push the Cap into the Cup Front

Tip: Take the Cup Front off and check that the Dia-

phragm is on correctly if:

•

•

You can’t get the Cup to push together fully

You can see the Cup Seal above the frosted lip

16

17

7.

Rotate the Cap when it’s in place for the most discreet fit

5. Using Elvie Stride

To help you to get the best performance from your pump,

this section will guide you through a pumping session.

5.1 Turning on Elvie Stride

Once fully assembled, press Power to turn the Hub on.

The Intensity Lights will begin to flash and will show

the intensity setting that Stimulation mode will start on.

You can adjust the intensity setting before you start

your session.

5.2 Aligning your nipple

We’re all different. No two nipples point in the same

direction. Correct nipple alignment in the Breast Shield

is the key to comfortable and efficient pumping.

Align the Breast Shield with the direction of your

nipples when you are putting it on.

To avoid discomfort, your nipple must be positioned

correctly in the Nipple Tunnel before pumping.

1. Use the markings on the Breast Shield to help align

your nipple when putting the Cup on

8. Check your nipple alignment through the open

Pour Hole. Close the Pour Hole using the Stopper

Pour Hole

9. Attach the Hub to your

clothing using the clip

4.6 Single-side pumping

To pump on one side, you only

need one Short Tube that connects

to one Cup. Remove the unused

Short Tube from the Tube Splitter.

Seal the opening with the Tube

Splitter Stopper to ensure consistent

suction on the one Cup in use.

Tip: Make sure the Tubes are not kinked or pinched flat

Breast Shield correctly aligned

Breast Shield incorrectly aligned

18

19

2. Bend forwards and hold your breast from underneath.

5.4 Starting your session

Bring the Cup to your breast, paying attention to the

direction of your nipple. You can use the markings

on the Breast Shield to help align your nipple

Once the Hub is turned on and the Cups are positioned in

your bra, press Play/Pause to start pumping. If you need to

pause pumping for any reason, press Play/Pause again.

5.5 Modes and intensity settings

Modes

Elvie Stride has two modes: Stimulation and Expression.

Elvie Stride will always start in Stimulation mode.

This is a faster pumping rhythm to stimulate milk let-down.

Elvie Stride will automatically switch to Expression mode

after approximately two minutes. You can also change

modes in the app or on the Hub using the Mode button.

When the Mode Light is illuminated, the pump is in

Expression mode. This is a slower, stronger pumping

rhythm for efficient milk expression.

Mode

Mode Light

3. Once the Cup is on, you can check your alignment

by removing the Stopper and adjusting so that your

nipple sits in the middle of the Nipple Tunnel.

Replace the Stopper before use

5.3 Finding the right in-bra fit

Elvie Stride is designed to be worn with your standard

nursing bra. You can use it in either a sitting or standing

position. Elvie Stride needs to be firmly pressed against

your breast. There should be no gaps between the Cups

and your breasts.

Every bra has a different level of support, so make sure to

get the pressure and fit right before each session. This is

important because it can have an impact on milk volumes.

20

21

Intensity settings

5.7 Ending your session

1. While leaning forward, press Play/Pause to stop

pumping. Turn off the pump by pressing and

holding Power

2. Unclip your bra and use your finger to break the seal

around your nipple to avoid nipple damage

3. Remove the entire Cup from your bra

4. Remove the Cap from the Cup

5.

The Cup can be laid flat on a dry surface with the

Nipple Tunnel facing up before decanting if required

6. Unplug and rotate the Stopper to decant your milk

Pour milk out as shown below, through the side of

7.

the Pour Hole

8. Refer to the Cleaning section of this booklet for

cleaning and sanitizing instructions

Elvie Stride has ten intensity settings in Stimulation mode

and ten intensity settings in Expression mode. This means

you can adjust the pump to find a setting that feels

comfortable and works efficiently in both Stimulation and

Expression modes. Once you can feel the suction on your

nipples, use and to adjust the intensity to find your

preferred setting in both modes. The Intensity Lights will

illuminate to show your chosen setting.

You can save the intensity settings that you would like your

pump to start in for both Stimulation and Expression mode

by using the Personalize feature in the Pump with Elvie

app. The app is free to download in the Apple App Store

or Google Play Store.

Tip: A higher intensity setting does not always mean a higher

volume of milk. Putting your nipple under excess stress

or pumping if you are in pain can reduce milk production.

Tip: Make sure the Tubes are not kinked or pinched flat.

5.6 Automatic functions

•

The Hub will automatically switch from Stimulation

mode to Expression mode after two minutes

• When the Hub is pumping, it will automatically pause

after 40 minutes. It is recommended that you leave

Elvie Stride for 60 minutes before using it again

• When the Hub is paused, it will automatically turn off

if a button has not been pressed for five minutes

•

•

The Hub will automatically turn off if the battery

is empty

The Hub will automatically turn off if a technical

error occurs

22

23

Tip: Leaning forward when you pause or stop your session

helps the milk drain from the Nipple Tunnel into the Cup.

•

•

•

•

•

•

•

5.8 Storing your milk

Do not store your milk in the Cup. Pour your milk

into a sealed container of your choice. Before storage,

label with date and time, and immediately place

in a fridge, freezer, or cooler bag with ice packs

While you are preparing to pour your milk the Cup

can be laid flat on a dry surface with the

Nipple Tunnel pointing up

For information on storing your breast milk, refer to

https://www.cdc.gov/breastfeeding/recommendations

/handling_breastmilk.htm

5.9 How to store Elvie Stride

Short-term storage

Recharge immediately after finishing your pumping

session if the Battery Light is on

Between sessions, please store your Elvie Stride out

of direct sunlight and ensure the washable parts are

clean and dry. Keep out of reach of children

Tip: It’s important that the components are kept dry in

storage because mold may develop if moisture is present.

Long-term storage

The washable parts will require cleaning and drying

before long-term storage and should be stored away

from direct sunlight to avoid discoloration

If stored at minimum or maximum storage temperature

(see Product specifications), please allow 24 hours for

the pump to reach normal operating temperature

before use after removing it from storage

6. Troubleshooting

Alerts and warnings

Intensity Lights flashing – Elvie Stride is paused

Battery Light flashes red four times – battery empty

All Intensity Lights illuminated –

maximum intensity level reached

All lights flash then turn off – technical error

(Contact Customer Care)

Factory reset

To perform a factory reset:

Turn Elvie Stride on

Press and hold both

simultaneously for five seconds

Play/Pause and Intensity Lights will flash while

Elvie Stride is resetting

All lights and Elvie Stride will then turn off

Re-attaching the Tube into the Cap

Tube Port

•

•

•

•

1.

2.

3.

4.

1.

2.

Insert the Short Tube

into the Cap

Push the Short Tube

onto the Tube Port

3. Once secure, ensure there

are no kinks or bends in tubes

24

25

7. Warranty

Elvie Stride Limited Warranty for the United States

At Chiaro Technology Limited (“Chiaro”), we stand behind the Elvie Stride. The

Elvie Stride is backed by a limited manufacturer’s warranty against any defects

in materials and/or workmanship for a period of two (2) years for the Hub and

ninety (90) days for all other components. These warranty periods shall run

from the date of original purchase. Because Chiaro cannot control the quality

of products sold by unauthorized sellers, this limited warranty applies only to

original purchasers of the Elvie Stride that were purchased from Chiaro or a

Chiaro authorized seller in the United States, unless otherwise prohibited by

law. Chiaro reserves the right to reject warranty claims from purchasers for

the Elvie Stride purchased from unauthorized sellers, including unauthorized

Internet sites. The warranty is also limited to the original, end-user purchaser.

This warranty does not cover cosmetic deterioration or damage caused

by general wear and tear, physical or natural destruction, accident, misuse,

neglect, alteration to the product or other external causes.

Any warranty claims must be supported with reasonable evidence, including

proof of date of purchase, alongside these warranty conditions. Chiaro

reserves the right to a reasonable period of investigation to establish the cause

of the defect. If you wish to make a warranty claim, please contact Chiaro at

questions@elvie.com and/or 508 300-9989 and have information available

regarding where and when you purchased your Elvie Stride. If your request is

approved, we will provide further guidance relating to providing your proof of

purchase or any returns. Please note that, if applicable, you are responsible for

costs incurred in mailing your product and/or proof of purchase. Chiaro will

repair or replace a defective Elvie Stride that is covered by this warranty. In

the event that Chiaro decides to provide a replacement, any replacement

will not renew or extend the duration of this warranty. There are no

warranties which extend beyond those stated herein. Any implied warranties

that may be applicable to the Elvie Stride, including implied warranties of

merchantability or fitness for a particular purpose, are limited in duration to

the duration of this warranty. Some States do not allow limitations on how

long an implied warranty lasts, so the above limitation may not apply to you.

Under no circumstances shall Chiaro be liable for any special, incidental, or

consequential damages based upon breach of this limited warranty, breach of

contract or strict liability. Some States do not allow the exclusion or limitation

of incidental or consequential damages, so the above limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and you

may also have other rights which vary from State to State.

If you have any questions about whether a seller is authorized,

call us at 508 300-9989 or email us at questions@elvie.com

Instructions for return

We will provide you with a Return Merchandise Authorization number, which

must be displayed on the outside packaging. Please keep your proof of purchase

in the event that you need to contact Elvie Customer Care for warranty services.

26

8. Product specifications

Technical specifications

On/Off

Mode

Increase intensity

Decrease intensity

Do not microwave

II

Play/Pause

Consult instructions for use

Manufacturer

Date of manufacture

Do not dispose the device together with unsorted municipal

waste (in accordance with the local regulations)

Compliance with international requirements for protection

from electric shock. (Type BF applied parts)

IP22

Protection against entrance of solid foreign objects and

against harmful effects due to the entrance of water

Manufacturer has taken all necessary measures to ensure that

the product complies with applicable safety legislation for

distribution within the European Community

SN

LOT

Serial Number

Lot Number

Direct Current

Vacuum range

-35 to -300 mmHg

Power

5 v DC, 1.5 A max

Battery capacity and type

2300 mAh Li-ion rechargeable

Bluetooth info

Bluetooth V4.2 (Bluetooth Low

Energy) Range up to 10m

Operating temperature

+5 °C to +30 °C/ +41 °F to +86 °F

Operating humidity

Ambient pressure

Use life

15 to 90% RH

90 to 106 kPa

500 hours

27

Electromagnetic compatibility (EMC) Advice

This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy,

and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

i) Reorient or relocate the receiving antenna

ii) Increase the separation between the equipment and receiver

iii) Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected

iv) Consult the dealer or an experienced radio/TV technician

for help

FCC Radiation Exposure Statement: This equipment complies

with FCC radiation exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-located or operating

in conjunction with any other antenna or transmitter.

Caution: The user is cautioned that changes or modifications not

expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

Guidance and manufacturer’s declaration –

electromagnetic emissions

Elvie Stride is intended for use in a Home Healthcare Environment.

The Elvie Stride breast pump product is suitable for use in a specific

electromagnetic environment outlined below. The user of this

product should assure that it is used in such an environment.

Emission Tests

Compliance

RF Emissions

CISPR 11

Group 1

Electromagnetic

environmental guidance

The Elvie Stride uses RF

energy only for its internal

function. Therefore, its RF

emissions are very low

and are not likely to cause

any interference in nearby

electronic equipment.

The Elvie Stride is suitable

for use in all establishments,

including domestic

establishments and those

directly connected to the

public low voltage power

supply network that

supplies buildings used

for domestic purposes.

RF emissions

CISPR 11

Class B

Harmonic emissions Not Applicable

IEC 61000-3-2

Voltage fluctuations / Not Applicable

flicker emissions

IEC 61000-3-3

WARNING: This device should not be used adjacent to or stacked

with other equipment. And if adjacent or stacked use is necessary,

this device should be observed to verify normal operation in the

configuration in which it will be used.

28

29

Guidance and manufacturer’s declaration –

electromagnetic immunity

Guidance and manufacturer’s declaration –

electromagnetic immunity

The Elvie Stride breast pump product is suitable for use in a specific

electromagnetic environment outlined below. The user of this product

should assure that it is used in such an environment. The Elvie Stride

breast pump was tested for immunity to electromagnetic disturbances

and passed using the following criteria:

1) No noticeable change in the operation of the breast pump

signifying maximum vacuum pressure is exceeded (-300 mmHg)

or cycle speeds are degraded.

2) During charging, the pump did not turn on and start operating.

Immunity test IEC 60601 test level Compliance level Electromagnetic

environment guidance

Electrostatic

discharge

(ESD) IEC

61000-4-2

+/- 2kV, +/-

4kV, +/- 6kV,

+/- 8kV contact

discharge

+/- 2kV, +/-

4kV, +/- 6kV,

+/- 8kV contact

discharge

+/- 2kV, +/- 4kV,

+/- 6kV, +/- 8kV,

+/- 15 kV air

discharge

+/- 2kV, +/- 4kV,

+/- 6kV, +/- 8kV,

+/- 15 kV

air discharge

30 A/m, 50

or 60 Hz

30 A/m, 50

or 60 Hz

Power

frequency

(50/60 Hz)

magnetic

field IEC

61000-4-8

Floors should be

wood, concrete

or ceramic tile.

If floors are

covered with

synthetic

material, the

relative

humidity should

be at least 30%.

It may be

necessary to position

the breast pump

further from sources

of power frequency

magnetic fields

or to install

magnetic shielding.

The power frequency

magnetic field

should be

measured in the

intended installation

location to assure that

it is sufficiently low.

30

Immunity test IEC 60601 test level Compliance level

Radiated

RF

IEC

61000-4-3

10 V/m

(minimum)

80 MHz –

2,7 GHz

80 % AM

at 1 kHz

10V/m

(minimum)

Electromagnetic environment guidance: Portable and mobile RF

communications equipment should be used no closer to any part

of the breast pump, including cables, than the recommended separation

distance calculated from the equation applicable to the frequency

of the transmitter. Recommend separation distance:

d = 1,2√P

d = 1,2√P 80 MHz - 800 MHz

d = 2,3√P 800 MHz - 2.7 GHz

Where P is the maximum output power rating of the transmitter in watts

(W) according to the transmitter manufacturer and d is the recommended

separation distance in metres (m). Field strengths from fixed RF

transmitters, as determined by an electromagnetic site survey, a should

be less than the compliance level in each frequency range. Interference

may occur in the vicinity of equipment marked with the following symbol.

Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.

Note 2: These guidelines may not apply in all situations. Electromagnetic

propagation is affected

A. Field strengths from fixed transmitters, such as base stations for radio

(cellular/cordless) telephones and land mobile radios, amateur radio,

AM and FM radio broadcast and TV broadcast cannot be predicted

theoretically with accuracy. To assess the electromagnetic environment

due to fixed RF transmitters, an electromagnetic site survey should be

considered. If the measured field strength in the location in which the

breast pump is used exceeds the applicable RF compliance level above,

the breast pump should be observed to verify normal operation.

If abnormal performance is observed, additional measures may be

necessary, such as re-orienting or relocating the breast pump.

B. Over the frequency range 150 kHz to 80 MHz, field strengths

should be less than 10 V/m.

31

WARNING: Portable RF communications equipment (including

peripherals such as antenna cables and external antennas) should be

used no closer than 30 cm (12 inches) to any part of Elvie Stride including

cables specified by the manufacturer. Otherwise, degradation of the

performance of this equipment could result

Band

(MHz)

Service

Modulation

Max

Power

(W)

Distance

(m)

Immunity

Test Level

(V/m)

380-

390

704-

787

800-

900

TETRA 400

Pulse

1.8

0.3

27

430-

470

GMRS 560,

FRS 460

FM

2

0.3

28

LTE Band 13, 17

Pulse

0.2

0.3

9

GSM 800/900;

TETRA 800; iDEN

820; CDMA 850;

LTE Band 5

Pulse

0.3

28

1700 -

1990

GSM 1800; CDMA

1900; GSM 1900;

DECT; LTE Band

1,3,4,25; UMTS

2400 -

2570

Bluetooth, WLAN,

802.11 b/g/n, RFID

2450. LTE Band 7

Pulse

0.3

28

Pulse

0.3

28

5100 -

5800

WLAN 802.11 a/n

Pulse

0.2

0.3

9

2

2

2

Transport, storage and disposal

Transport

While traveling, use the Charging Cable provided and pair

with the appropriate USB power source for your current

location. Please check with the airline prior to travel for

advice on carrying and using Elvie Stride while flying.

Temperature: -20 °C to +60 °C / -4 °F to +140 °F

Relative humidity: 15 to 90%

Storage

Temperature: -20 °C to +60 °C / -4 °F to +140 °F

Relative humidity: 15 to 90%

Ambient pressure: 90 to 106 kPa

Disposal

Elvie Stride contains a Li-ion rechargeable battery. Please

dispose of the Hub at a designated collection point for the

recycling of waste electrical and electronic equipment.

The appropriate disposal of Elvie Stride will help conserve

natural resources and ensure that it is recycled in a manner

that protects human health and the environment.

For more information about where you can drop off your

waste for recycling, please contact your local authority or

where you purchased your product.

32

33

34

35

elvie.com

Manufactured and distributed by Chiaro Technology Limited

Model number: EB01

Document number: AW-000027

Revision number: 7

28

36



 

 

 

 

 

 

 

 

 

 

 

 

 

 

ITEM NO.

PART NUMBER

1

000635

DESCRIPTION

Puck Assembly

QTY.

1

ZONE

REV.

DATE

APPROVED

REVISIONS

DESCRIPTION

4

5

6

7

8

9

CHILD PARTS MODIFIED. TOOL MOD FOR EV

2020-11-04

CHILD PARTS MODIFIED. MARKINGS UPDATED . TOOL MOD FOR DV

2020-12-23

CHILD PARTS MODIFIED. TOOL MOD FOR DV. MARKINGS UPDATED

2021-02-03

CHILD PARTS MODIFIED. TOOL MOD FOR PV

CHILD ASSEMBLY MODIFIED FOR PV

CHILD PART MODIFIED, SILENCER UPDATE

2021-04-07

2021-05-25

2021-07-30

DT

DT

DT

DT

DT

DT

9

10.18 ±0.20

UNIQUE DEVICE

SERIAL NUMBER

GENERATED AT

END-OF-LINE

FUNCTION TEST

SCANNABLE BARCODE OF

UNIQUE DEVICE SERIAL NUMBER

Z

DETAIL Z

SCALE 2 : 1

NOTE:

REFER TO 000854 PUCK MARKINGS - ARTWORK REV[LATEST].AI

FOR ARTWORK AND COLOUR SPEC.

DIMENSIONS FOR GUIDANCE ONLY, 3D CAD MODEL IS MASTER,

ARTWORK SHOULD BE CENTRAL TO PART

1

0

2

.

0

±

9

0

.

5

= CHANGE ICON

= KEY CHARACTERISTIC

= LOW CPK CRITICAL FIT

1. 3D CAD MODEL IS MASTER.

2. THIS DOCUMENT IS THE SOLE PROPERTY OF CHIARO

TECHNOLOGY LTD. & SHOULD NOT BE USED OR

DISTRIBUTED WITHOUT PRIOR WRITTEN CONSENT.

PROJECTION:

THIRD ANGLE

DO NOT SCALE DRAWING

REVISION: 9

DEBUR AND

BREAK SHARP

EDGES

NAME

DATE

TITLE:

CHIARO TECHNOLOGY LTD

Puck Markings Laser Print

DRAWN

CHECKED

APPROVED

MATERIAL:

FINISH:

OB

-

DT

2020-03-03

-

30/07/2021

N/A

N/A

DWG NO.

COLOUR:

SEE ARTWORK FILE

000854

A3

WEIGHT: N/A

SCALE:1:2

SHEET 1 OF 1



 

 

2nd Floor, 63-66 Hatton Garden, London - EC1N 8LE

Tel: +44 (0) 203 745 5201

23rd August 2021

This is to certify that Chiaro Technology Ltd hereby authorises UL International (UK)

Ltd. to act as the TCB for the application of the Elvie LIMA Breast Pump, Model

EB01, FCC ID: 2AEHI-EB01to the FCC.

We certify that we are not subject to a denial of Federal benefits, that include FCC

benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §

862 because of a conviction for possession or distribution of a controlled substance.

See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Telecommunication Certification Body

UL International (UK) Ltd.

Units 1-3, Horizon

Wade Road

Kingsland Business Park

Basingstoke

Hampshire

RG24 8AH

United Kingdom

Subject: Authorisation Letter

To whom it may concern

Yours faithfully,

____________________

Alastair Traquair

Head of Quality

email: alastair.traquair@chiaro.co.uk

www.chiaro.co.uk

Registered company name - Chiaro Technology Ltd

Company No. 08502405 registered in England and Wales

VAT Reg. GB 172 6300 28



 

 

2nd Floor, 63-66 Hatton Garden, London - EC1N 8LE Tel: +44 (0) 203 745 5201 23rd August 2021 Telecommunication Certification Body UL International (UK) Ltd. Units 1-3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Pursuant to Sections 0.457(d) and 0.459 of CFR 47 , Chiaro Technology Ltd request that the following information, provided to support the FCC application for the Elvie LIMA Breast Pump, Model EB01 FCC ID: 2AEHI-EB01 be held permanently confidential:

Schematics Block Diagrams Operational Description The above material contains trade secrets not customarily released to public that are judged to have the potential to cause detriment to the applicant and provide unjustified benefits to its competitors. This information should not be available for public disclosure for an indefinite period of time. Yours faithfully, ____________________ Alastair Traquair Head of Quality email: alastair.traquair@chiaro.co.uk www.chiaro.co.uk Registered company name - Chiaro Technology Ltd Company No. 08502405 registered in England and Wales VAT Reg. GB 172 6300 28