Wireless Optical Mouse Wireless Optical Mouse with Card Reader Receiver with Card Reader Receiver User's Guide User's Guide Notice:
Notice:
Federal Communications Commission (FCC) requirements, Part 15 Federal Communications Commission (FCC) requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
--Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the users authority to CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. operation. Congratulations on your purchase of this Wireless Optical Mouse with a Card Reader Congratulations on your purchase of this Wireless Optical Mouse with a Card Reader Receiver. Please carefully read the User's Guide to learn about the installation and the Receiver. Please carefully read the User's Guide to learn about the installation and the convenient and powerful functions of your new Wireless Optical Mouse with the Card convenient and powerful functions of your new Wireless Optical Mouse with the Card Reader Receiver. Reader Receiver. 1. Contents of the Package 1. Contents of the Package 1) Wireless Optical Mouse (one channel or two channel) 1) Wireless Optical Mouse (one channel or two channel) 2) Card Reader Receiver (2-in-1 or 4-in-1 version) 2) Card Reader Receiver (2-in-1 or 4-in-1 version) 3) Two AA or AAA Batteries for the Mouse 3) Two AA or AAA Batteries for the Mouse 4) CD-ROM for Mouse and Card Reader Drivers 4) CD-ROM for Mouse and Card Reader Drivers 5) User's Guide 5) User's Guide Optional Parts for Wireless Optical Mouse Optional Parts for Wireless Optical Mouse
(The optional parts may be different due to various wireless optical mice.)
(The optional parts may be different due to various wireless optical mice.) 1) AC to DC Adaptor 1) AC to DC Adaptor 2) USB to DC Cable 2) USB to DC Cable 2. Install Hardware 2. Install Hardware 2-1. Install the Card Reader Receiver 2-1. Install the Card Reader Receiver 1) Please turn on your PC. 1) Please turn on your PC. 2) Plug the USB connector of the receiver into the USB port of the PC. 2) Plug the USB connector of the receiver into the USB port of the PC. Figure 2-2 2-2. Select the Channel 2-2. Select the Channel 1) Please skip this section if the mouse has only one channel. The location of the channel 1) Please skip this section if the mouse has only one channel. The location of the channel switch may be different due to various mouse shapes. switch may be different due to various mouse shapes. 2) The two-channel switch is located at the back of the mouse or inside the battery case. Select 2) The two-channel switch is located at the back of the mouse or inside the battery case. Select Channel "1" or "2" . Channel "1" or "2" . 3) Put the batteries into the battery box. 3) Put the batteries into the battery box. 2-3. Link the Mouse with the Receiver 2-3. Link the Mouse with the Receiver 1) The LED indicator on the receiver will light. 1) The LED indicator on the receiver will light. 2) Press the Link Button on the receiver and the LED indicator will blink. The receiver is 2) Press the Link Button on the receiver and the LED indicator will blink. The receiver is ready to automatically link with the mouse. ready to automatically link with the mouse. 3) Press the Link Button on the back of the mouse and the LED indicator on the receiver will 3) Press the Link Button on the back of the mouse and the LED indicator on the receiver will blink quickly. The indicator will stay in light while successfully finish the linkage. blink quickly. The indicator will stay in light while successfully finish the linkage. 4) The LED indicator will blink while you move the mouse. 4) The LED indicator will blink while you move the mouse. 5) If you need to re-link the mouse or after changing the mouse batteries, please repeat the 5) If you need to re-link the mouse or after changing the mouse batteries, please repeat the above linkage instructions. above linkage instructions. 6) If the selected channel is interfered by other wireless-mouse users nearby, please change 6) If the selected channel is interfered by other wireless-mouse users nearby, please change the Link ID by re-linkage or select the other channel immediately. the Link ID by re-linkage or select the other channel immediately. 3.Install the Drivers 3.Install the Drivers 3-1. Notice 3-1. Notice 1) The driver supports Windows 98, Windows 2000, Windows ME and Windows XP. 1) The driver supports Windows 98, Windows 2000, Windows ME and Windows XP. 2) The driver may be automatically installed. 2) The driver may be automatically installed. 3) The driver CD-ROM contents the drivers of the mouse and the card reader receiver. Please 3) The driver CD-ROM contents the drivers of the mouse and the card reader receiver. Please select to install the mouse or the card reader receiver select to install the mouse or the card reader receiver driver at the pop-up window. driver at the pop-up window. 3-2. Install the Mouse Driver 3-2. Install the Mouse Driver 1) Insert the driver CD-ROM to your PC. 1) Insert the driver CD-ROM to your PC. 2) If the driver does not be automatically installed, please 2) If the driver does not be automatically installed, please double click the file "Setup.exe" and follow the setup double click the file "Setup.exe" and follow the setup instructions to complete the driver installation. instructions to complete the driver installation. 3) A Mouse Setting icon will appear on the taskbar of 3) A Mouse Setting icon will appear on the taskbar of Windows after you successfully finish the installation. Windows after you successfully finish the installation. 4) You can double click the Mouse Setting icon and follow 4) You can double click the Mouse Setting icon and follow the selection instructions to set the mouse button the selection instructions to set the mouse button functions. functions. F1~F10 Auto Scroll Backspace Close Application Connect to Internet Control Lock Control Panel Copy Cut Delete Double Click Down Drag Lock End Enter Esc Explorer Find Computer Find File Home Horizontal Wheel Interent Explorer Backward Interent Explorer Forward Lanuch Default Browser Lanuch Default E-mail Left Maximize Windows Middle Button Minimize All Windows Minimize Windows Page Down Page Up Paste Redo Right Run... Shift Lock Space Start Menu System Help System Property Tab Undo Undo Minimize All Windows Universal Scroll Universal Zoom Up Figure 3-2-1 Figure 3-2-2 3-3. Select Mouse Functions 3-3. Select Mouse Functions 1) Double click the Mouse Setting icon. 1) Double click the Mouse Setting icon. 2) Follow the instructions of the selection items to set the button functions. 2) Follow the instructions of the selection items to set the button functions. 3-4. Install the Driver for the Card Reader Receiver 3-4. Install the Driver for the Card Reader Receiver Notice:
Notice:
- 4-in-1 Card Reader Receiver: Compatible with CF, SM, MM and SD Cards.
- 4-in-1 Card Reader Receiver: Compatible with CF, SM, MM and SD Cards.
- 2-in-1 Card Reader Receiver: Compatible with CF and SM cards.
- 2-in-1 Card Reader Receiver: Compatible with CF and SM cards.
- The PC system under Windows ME or Windows XP will automatically detect and install the
- The PC system under Windows ME or Windows XP will automatically detect and install the card reader driver without operating the driver CD-ROM. card reader driver without operating the driver CD-ROM. 1) Insert the driver CD-ROM to your PC. 1) Insert the driver CD-ROM to your PC. 2) Windows 98 System: Please select the folder of Windows 98. Double click the file 2) Windows 98 System: Please select the folder of Windows 98. Double click the file Msdriver.exe to install the card reader driver. Msdriver.exe to install the card reader driver. 3) Windows 2000 System: Please select the folder of Windows 2000. Double click the file 3) Windows 2000 System: Please select the folder of Windows 2000. Double click the file Win2000_driver_setup_v112.msi to install the card reader driver. Win2000_driver_setup_v112.msi to install the card reader driver. 4) Data Transfer Rate (From Host) of the 4-in-1 Card Reader Receiver 4) Data Transfer Rate (From Host) of the 4-in-1 Card Reader Receiver
- Compact Flash Card (CF): 350KB/sec
- Compact Flash Card (CF): 350KB/sec
- Smart Media Card (SM): 250KB/sec
- Smart Media Card (SM): 250KB/sec
- Multi Media Card (MM): 150KB/sec
- Multi Media Card (MM): 150KB/sec
- Secure Digital Card (SD): 200KB/sec
- Secure Digital Card (SD): 200KB/sec 4. Optional Charging Modes for Wireless Optical Mouse 4. Optional Charging Modes for Wireless Optical Mouse Notice:
Notice:
-There are two charge modes for the rechargeable version. Please skip this section if your mouse is not rechargeable.
-Some mice may have only one charge mode.
-Please use rechargeable batteries for the chargeable mouse. 4-1. Power from PC Connect the mouse to the USB port of PC with the USB to DC cable. 4-2. Power from Adaptor Connect the mouse with the AC to DC adaptor. 5. Battery and Charging Notice 1) At the first time of usage, please charge the batteries at least 6 to 8 hours. 2) The LED indicator or the scroll wheel on the mouse will light while the mouse is low battery. Please recharge the batteries immediately. 3) Press any button to wake up the mouse while the mouse is in the sleeping mode. 4) Recommendation: please do not use the mouse during charge periods. Wireless Optical Mouse with Card Reader Receiver User's Guide PMU-MRF(C173+card reader receiver)