Wireless Mouse User's Guide PMU-MRF ready to automatically link with the mouse ready to automatically link with the mouse 3) Press the ID Link Button on the back of the mouse and the LED indicator on the receiver 3) Press the ID Link Button on the back of the mouse and the LED indicator on the receiver will blink quickly. The indicator will stay in light while successfully finish the linkage. will blink quickly. The indicator will stay in light while successfully finish the linkage. 4) The LED indicator will blink while you move the mouse. 4) The LED indicator will blink while you move the mouse. 5) If you need to re-link the mouse or after changing the mouse batteries, please repeat the 5) If you need to re-link the mouse or after changing the mouse batteries, please repeat the above linkage instructions. above linkage instructions. 6) If the selected channel is interfered by other wireless-mouse users nearby, please change 6) If the selected channel is interfered by other wireless-mouse users nearby, please change the Link ID by re-linkage or select the other channel immediately. the Link ID by re-linkage or select the other channel immediately. 3.Install Driver 3.Install Driver 3-1. Notice 3-1. Notice 1) The driver supports Windows 95, Windows 98, Windows NT, Windows 2000, Windows ME 1) The driver supports Windows 95, Windows 98, Windows NT, Windows 2000, Windows ME and Windows XP. and Windows XP. 2) The USB interface is compatible with Windows 98, Windows 2000, Windows ME and 2) The USB interface is compatible with Windows 98, Windows 2000, Windows ME and Windows XP only. Windows XP only. 3-2. Installation 3-2. Installation 1) Insert the driver disk or CD-ROM to your PC. The PC 1) Insert the driver disk or CD-ROM to your PC. The PC system may automatically install the driver through system may automatically install the driver through selecting the PC auto-install function. selecting the PC auto-install function. 2) If the PC system does not set the auto-install function, 2) If the PC system does not set the auto-install function, please double click the file "Setup.exe" and follow the please double click the file "Setup.exe" and follow the setup instructions to complete the driver installation. setup instructions to complete the driver installation. 3) A Mouse Setting icon will appear on the tool bar of 3) A Mouse Setting icon will appear on the tool bar of Windows after you successfully finish the installation. Windows after you successfully finish the installation. 3-3. Select Mouse Functions 3-3. Select Mouse Functions 1) Double click the Mouse Setting icon. 1) Double click the Mouse Setting icon. 2) Follow the instructions of the selection items to set the 2) Follow the instructions of the selection items to set the button functions. button functions. Figure 3-3-1 F1~F10 Auto Scroll Backspace Close Application Connect to Internet Control Lock Control Panel Copy Cut Delete Double Click Down Drag Lock End Enter Esc Explorer Find Computer Find File Home Horizontal Wheel Interent Explorer Backward Interent Explorer Forward Lanuch Default Browser Lanuch Default E-mail Left Maximize Windows Middle Button Minimize All Windows Minimize Windows Page Down Page Up Paste Redo Right Run... Shift Lock Space Start Menu System Help System Property Tab Undo Undo Minimize All Windows Universal Scroll Universal Zoom Up Figure 3-3-2 4. Batteries Notice 4. Batteries Notice 1) The LED indicator or the scroll wheel on the mouse will light while the mouse is low battery. 1) The LED indicator or the scroll wheel on the mouse will light while the mouse is low battery. Please change the batteries immediately. Please change the batteries immediately. 2) Move the mouse while the mouse is in the sleeping mode. 2) Move the mouse while the mouse is in the sleeping mode. Wireless Mouse Wireless Mouse User's Guide User's Guide Notice:
Notice:
Federal Communications Commission (FCC) requirements, Part 15 Federal Communications Commission (FCC) requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
--Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the users authority to operate CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. the equipment. This device complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
(2) this device must accept any interference received, including interference that may cause undesired operation. Congratulations on your purchase of this Wireless Mouse. Please carefully read the Congratulations on your purchase of this Wireless Mouse. Please carefully read the User's Guide to learn about the installation and the powerful functions of your new User's Guide to learn about the installation and the powerful functions of your new Wireless Mouse. Wireless Mouse. 1. Contents of the Package 1. Contents of the Package 1) Wireless Mouse (one channel or two channel) * 1 1) Wireless Mouse (one channel or two channel) * 1 2) Receiver *1 (PS/2, USB or UP Combo) 2) Receiver *1 (PS/2, USB or UP Combo) 3) Two AA or AAA Batteries for the Mouse 3) Two AA or AAA Batteries for the Mouse 4) Mouse Driver * 1 (Disk or CD-ROM) 4) Mouse Driver * 1 (Disk or CD-ROM) 5) User's Guide * 1 5) User's Guide * 1 3Figure 2-1 3Figure 2-2 2. Install Hardware 2. Install Hardware 2-1. Install the Receiver with a PS/2 Connector 2-1. Install the Receiver with a PS/2 Connector 1) Please turn off the PC. 1) Please turn off the PC. 2) Plug the PS/2 connector of the receiver into the PS/2 mouse port 2) Plug the PS/2 connector of the receiver into the PS/2 mouse port of the PC. of the PC. 2-2. Install the Receiver with a USB Connector 2-2. Install the Receiver with a USB Connector 1) You can turn on the PC before connect the USB connector with PC. 1) You can turn on the PC before connect the USB connector with PC. 2) Plug the USB connector of the receiver into the USB port of the 2) Plug the USB connector of the receiver into the USB port of the PC. PC. 2-3. Install the Receiver with a USB to PS/2 Combo Connector 2-3. Install the Receiver with a USB to PS/2 Combo Connector 1) The combo connector is a USB connector with a USB to PS/2 1) The combo connector is a USB connector with a USB to PS/2 adaptor. adaptor. 2) Please check the mouse port of your PC. If the mouse port of the 2) Please check the mouse port of your PC. If the mouse port of the PC is USB, please plug the USB connector to the PC without using PC is USB, please plug the USB connector to the PC without using the USB to PS/2 adaptor. the USB to PS/2 adaptor. 3) If the mouse port of the PC is PS/2, please turn off the PC. Connect the USB connector with 3) If the mouse port of the PC is PS/2, please turn off the PC. Connect the USB connector with the USB to PS/2 adaptor, and then connect the receiver with the PC. the USB to PS/2 adaptor, and then connect the receiver with the PC. 2-4. Select the Channel 2-4. Select the Channel Please skip this section if the mouse has only one channel. The location of the channel Please skip this section if the mouse has only one channel. The location of the channel switch may be different due to various mouse shapes. switch may be different due to various mouse shapes. 3Figure 2-3 1) The two-channel switch is located at the back of the mouse or inside the battery case. Select 1) The two-channel switch is located at the back of the mouse or inside the battery case. Select Channel "1" or "2" . Channel "1" or "2" . 2) Put the batteries into the battery case. 2) Put the batteries into the battery case. Note: There is a channel selector at the back of the receiver for some models. If the Note: There is a channel selector at the back of the receiver for some models. If the receiver has the channel selector, please select the channel as same as the channel of receiver has the channel selector, please select the channel as same as the channel of the mouse. the mouse. 2-5. Link the Mouse with the Receiver 2-5. Link the Mouse with the Receiver 1) Turn on the PC. The LED indicator on the receiver will light. 1) Turn on the PC. The LED indicator on the receiver will light. 2) Press the ID Link Button on the receiver and the LED indicator will blink. The receiver is 2) Press the ID Link Button on the receiver and the LED indicator will blink. The receiver is