Smart WiFi Baby Monitor User Manual Status Indicator Microphone microSD Card Slot Speaker Micro USB Port Names of Parts Lens Night Light Button Night Light Temperature Sensor Micro USB Port WPS Button Power/Mode Button
| 1 English Getting Started Mobile connects to smart WiFi baby monitor directly via App [Unieye Care] for remote control, live view, lullaby playback, Night Light control and receives push alerts when events are detected. For initial use, mobile needs to:
1. Connects to internet (via WiFi, 3G/4G). 2. Download and install App [Unieye Care] from Google Play Store or Apple App Store. Unieye Care Camera needs to:
1. Insert a microSD Card (suggested class 10, up to 64GB) 2. Power on: Plug a USB power cable into one of PC USB port USB output adapter 3. Power off:
Press for 2 seconds to turn off camera. Modes Switch in Camera Camera status indicator shows current funciton. Press Steady orange for direct control Steady green for Internet control to switch. Status Indicator Power/Mode 2 |
English Wireless & App Operation Run App [Unieye Care] on mobile and navigate either one of functions:
(I) Local - Direct control (II) Internet - Internet control Unieye Care
(I) Local Local Internet Mobile directly connects to camera via WiFi for remote control, live view, lullaby playback, night light control, camera setup, and receives push notification when noise and motion events are detected. Status: Orange Local Mobile Camera
(II) Local Internet Internet Mobile connects to camera via internet to accomplish the same features as in [Local] function, and links to partner's camera to enjoy the instant live sharing. AP WPS Internet Mobile Unieye Server Wireless Router AP 3G/4G Mobile Wireless Router AP Camera 3G/4G Mobile Hotspot Status: Green
| 3 English LocalFunction Internet Local Before using mobile App'sLocalfunction, ensure mobile WiFi been on and camera status indicator shows steady orange. Mobile Connects to Camera 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings]
Turn on [Wi-Fi] and select the camera name.
[Wi-Fi]. 2. Run [Unieye Care]. 3. TapLocaland select the camera to enter View Page. Tap [
] to scan again if camera is not found. Note: For first use, password is not required. User can set camera password in Setup Page. iOS Settings Local Main Page Local View Page 4 |
English 4.Localfunction has three function pages: View, Album and Setup. View Page Items Descriptions Adjust brightness level of night light. Play lullaby. Mute the sound from camera. Shoot videos or take photos and saved files into mobile "Album\Unieye Care\". Talk to camera from mobile. Events Page (for camera) Items Camera Videos Descriptions View or delete video files recorded and saved in camera during motion and noise detection. Setup Page (for camera) In [Setup] Page, tap [Save] to complete settings to camera. Groups Descriptions Camera Settings Edit name, password. Format SD card. Adjust night vision, noise detection, motion detection, etc. Internet Settings Edit Email and AP forInternetfunction.
| 5 English Camera Internet Setup Before using internet, Internet Settings must be properly setup. Camera has two different procedures to complete Internet Settings:
(I) AP without WPS
(II) WPS wireless router
(I) AP without WPS 1. Go to [Setup]
2. Tap [Save] to complete Email & AP settings. Note: AP(Access Point) can be Wireless Router or 3G/4G Mobile Wireless Router or 3G/4G Mobile Hotspot Edit Email and AP
[ Internet Settings]
AP AP AP AP AP AP AP AP AP Wireless Router 3G/4G Mobile Wireless Router 3G/4G Mobile Hotspot
(II) WPS Wireless Router 1. Setup Mobile App Go to [Setup]
Tap [Save] to complete Email settings. 2. Setup Router Press WPS button of WPS wireless router.
[ Internet Settings]
Edit Email 3. Setup Camera Press WPS Status indicator shows steady green when connectsInternetfunction successfully. WPS Button 6 |
English Local Internet InternetFunction A camera can setupInternetFunction by 2 methods:
(I) Setup Wizard (II) Others and follow the instructions to view internet
(I) Setup Wizard 1. Run [Unieye Care] and tapInternet. 2. Tap live videos.
(II) Others Before adding a configured camera or using another mobile, ensure the camera is in Internetfunction and status indicator shows steady green. 1. Run [Unieye Care] and tapInternet. 2. Tap Others in list. Enter camera ID and password. Intenet Main Page Remote Control Functions Internetfunction has two function pages: View and Setup. inLocalfunction. View Page: Same as the 6 features Setup Page (for camera) In [Setup] Page, tap [Save] to complete settings to camera. Descriptions Groups Camera Settings Adjust night vision, noise detection, motion detection, firmware upgrade, etc. Push Notification When camera is inInternetfunction and events are detected, Push Notification and Email will be sent to mobile and events clips to be saved to SD card.
| 7 English Transfer Files to PC 1. Use Micro USB cable to connect camera to PC. 2. Find videos at "My computer\Removable Disk\". 3. Copy, move, delete, or playback videos on PC. Camera Hotkey Camera Hotkey Micro USB Port Forced Shutdown Press and hold for 5 seconds to turn off camera. Forced Factory Settings Press and hold Alert beep Camera: Power on camera Night Light button and press WPS tones to complete the default settings. Mobile: Go to App [Unieye Care]
Localfunction
[Setup] page factory settings. Connect Reset Camera Indication Condition Status Indicator Power On Flash in orange for few seconds, then turn to steady orange Mass Storage Mode Steady red Localfunction Steady orange Internetfunction Steady green Power Off No indication No change Low Battery Flash in green for few seconds, Fail connect to then turn to orange Internet Factory Reset No change Beep 1 time N/A N/A N/A 1 time 2 times N/A 3 times 8 |
English Troubleshooting Situation Cause/Solution Camera cannot turn on Power is low. Recharge battery Camera is frozen Camera cannot record Camera cannot connect to AP or could server Mobile cannot find Camera Local Mobile cannot watch live view Local Mobile cannot connect to cloud server Internet Mobile cannot watch live view Internet Forget Camera password for 5 seconds to force Press and hold turn off; press again to power on No microSD card or microSD card is full microSD card cannot be recognized Format microSD card in [Unieye Care] or replace microSD card Invalid AP name or password Weak WiFi signal or not in WiFi coverage No internet or cloud server is not accessible Blocked by some firewall Camera not in WiFi coverage Mobile WiFi is disabled iOS user does not choose camera name in Wi-Fi Settings Tap [
] on [Unieye Care]
Weak WiFi signal Camera is occupied by other mobile Check mobile 3G/4G or WiFi internet connection Blocked by some firewall The internet bandwidth is insufficient for camera upload or mobile download Press and hold Night Light button and press WPS to reset
| 9 English FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Compliance (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit adopted by the FCC is 1.6W/kg for an uncontrolled environment. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible