FCC ID: E8HKBR0108 Wireless Keyboard

Users Guide for Wireless Input Device A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

?? Reorient or relocate the receiving antenna

?? Increase the separation between the equipment and receiver

?? Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

?? Consult the dealer or an experienced radio/TV technician for help WARNING:

A shieled-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT BREAKS. Take regular breaks and keep a good posture. Consult your physician promptly if you notice any lost of motion or pain in your wrist when using the keyboard. 1 B. PRODUCT SPECIFICATION 1. Frequency Band:

Keyboard Mouse 27.145 27.195 27.045 27.095 2. Channel: 2 channels for keyboard & 2 channels for mouse 3. Frequency Modulation: FSK mode 4. Power Ratting:

Keyboard Mouse Receiver 3V, 30mA (max) 3V, 50mA (max) 5V, 100mA (max) 5. RF Power: <10mW 6. Battery Life Time:

Keyboard: 500 working hours with continuous operation Mouse: 50 working hours with continuous operation 7. Operating Temperature: 0J ~ 40J Storage Temperature: -10J ~ 60J C. HARDWARE INSTALLATION 1. Plug the receiver connector into USB port on your computer 2. Load two AA batteries into battery chamber on the back of keyboard and two AA batteries to battery chamber of mouse D. CHANNEL SETTING WHEN INTERFERENCE OCCURS 1. The first binding by user Step 1 Push the button on receiver Step 2 Push the button on back of keyboard Step 3 Push the button on receiver Step 4 - Push the button on back of mouse 2. Change Channel Push the button on the back of keyboard or mouse Alternate:

Step 1 Press receiver button, LED green light is blinking Step 2 Push keyboard or mouse button on back of device and then LED light stops blinking on receiver to confirm channel is changed. 2 3. Change ID Step 1 Press receiver button, LED green light is blinking. Step 2 Push the button on the back of keyboard or mouse more than two seconds and release, LED green light becomes blinking faster in 3 seconds and then light is off. Note: To have maximum performance, avoid placing receiver, keyboard and mouse on metallic surface. Operating distance between keyboard, mouse and receiver will depend on the environment around. User can try various locations for the receiver in order to find best operating performance. 3

REV LTR DATE REV . DIMENSION DESIGN APPROVE A B 79.8

+0

-0.2 FCC ID: E8HKBR0108 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received , including interference that may cause undesired operation. XXXXXXXX Canada 210 4 9

. 8

0

. 2

0 Model Number : KBR0108 Power Rating : 3V 30mA Serial Number :

E164844

R31310

.. TUV Rheinland

.. geprute Sicherheit 0560 Made in ********

CET \ LR94275 CEM 2 \ LR114370 CEM 3 \ 156913 VENDER UL MARK. CET \ Made in Thailand CEM \ Made in China NOTES:

1.MATERIAL: SYNTHETIC PAPER t=0.15mm (WITH GLUE)

(UL/CSA APPROVED) 2.BACKGROUND COLOR: WHITE 3.CHARACTER COLOR: PANTONE Process Black C 4.FINISHED: ADHESIVE. (SONY NP303) 5.LABEL VENDOR HAS TO BE APPRD. BY UL/CSA. WUR0108 MODEL NO. APPROVED CHECKED DESIGNED 253-00108-00 PART NO. MAT.:

NOTES SPEC:

NOTES CHICONY REMARK MODEL NO.:

WUR0108 FINISH:

NOTES NAME:

TAMMY TOL:

Q'TY SIZE: A4 UL/CSA/TUV/CE/BSMI SPEC. ID LABEL 09/23-'02 SCALE: 1.5 : 1 UNIT: MM DWG NO.:

WUR0108FCC REV: 0

Te ny Chicony Electronics Co., Ltd. ANC ee aCe ca me Cem VS ee L ULE Park, Taipei Hsien, Taiwan R.O.C. Tel; 886-2-22988120 Fax:886-2-22989745 FCC ID: ESHKBR0108 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

RUE (a 5 (oe ere til The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, T.S.Chen / Manager Mail: t.s._chen@chicony.com.tw

FCC ID: E8HKBR0108 Operational Description The transmitter of the EUT (Wireless Keyboard) which uses Wired Antenna is powered by 3V Battery. The output power of this device is very low. Under normal use condition, the transmitter and the receiver are quite close, so high EIRP power is neither necessary nor allowed because of interference. ADT No.910917R02A

Chicony Electronics Co., Ltd. ANCOR TEGO ass RIM eM AT QUE forelDster Park, Taipei Hsien, Taiwan R.O.C. Tel: 886-2-22988120 Fax: 886-2-22989745 POWER OF ATTORNEY To whom it may concern:

We, the undersigned, Chicony Electronics Co., Ltd...hereby authorize Advance Data Technology Corporation (ADT) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by ADT on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!

Sincerely yours,

.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-2298-8120 Fax: +886 2-2298-9745