A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. WARNING:
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. INFORMATION FOR OPTICAL POINTING DEVICES ONLY :
User-observable light is 15 microwatts in normal operation. This product has been tested to comply with international Standard IEC 60825-1:(1993), incid. Amd.2(2001). This product uses LEDs that are inherently Class 1. Class 1 LED Product B. PRODUCT SPECIFICATION 1. SYSTEM AND INTERFACE Receiver Interface : USB interface designed to be fully compatible with Microsoft Windows 98, ME, 2000, XP, Vista system. 2. FREQUENCY BAND :
2402 - 2479 MHz 3. FREQUENCY MODULATION : GFSK MODE 5. POWER RATING :
Mouse : 1.5 V , 50 mA (MAX)_ Receiver (Dongle) : 5 V , 100mA (MAX) for USB 6. BATTERY:
Mouse : 1 piece of AA Batteries 7. BATTERY LIFE TIME :
Mouse : 120 hours reference (operating mode) 8. OPERATION DISTANCE Mouse: 30 feet without signal disturbance and no direction limit. 9. MOUSE DETECTION METHOD Mouse : Mechanical tracking method 10. MOUSE RESOLUTION: 800 DPI 11. OPERATING TEMPERATURE : 0 C~ 40 C. 12 STORAGE TEMPERATURE : -10 C ~ 60 C. C. HARDWARE INSTALLATION 1. Plug the receiver (Dongle) connector into an USB port. 2. SYSTEM will take around 10 sec to find your mouse automatically.
(PS : If your OS is Windows 98, please follow the screen instruction to complete your mouse installation) 3. Please keep your receiver (Dongle) from the other electrical devices about 8 inches. The otherelectrical devices may influence your receiver (Dongle) sensitivity. 4. Put one battery into your mouse battery chamber. D. Setting ID on mouse
(1) There is one LED on the top of receiver (Dongle). The LED will be blinking during the ID setting or data received.
(2) Push the connection button on the top of receiver (Dongle). The indicator on the top of receiver (Dongle) will be blinking.