WiFi Module CDW-9776010-00 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 OEM/Integrators Installation Manual Software Customer Approve Date Design Check Approve Version Date V1.2 2018.11.15 CHINA DRAGON TECHNOLOGY LIMITED B4 Bidg. haosan No.1 lndustry Park, Shajing street, B, Shenzhen, China Phone(86 755) 81449957 Fax(86 755) 81449967 E-mail: Info@cdtech.cn Http://www.cdtech.cn WiFi Module CDW-9776010-00 CHINA DRAGON TECHNOLOGY LIMITED Reversion History Version Date Modification V1.2 2018.11.15 New 1 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 1. Overview The CDW-9776010-00 is a highly integrated WI-FI single chip which supports 150Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective thoughput from an exended distance. Optimzed RF architecture and baseband algorithms provide superb performance and low power consumption.Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. The CDW-9776010-00 is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance. 2. Features IEEE 802.11b/g/n Embedded high-performance 32-bit RISC microprocessor Highly integrated RF with 55nm CMOS technology 1T1R mode with support of 150Mbps PHY rate Integrate high efficiency switching regulator Best in-class power consumption performance MT7601 chip compact 5mm x 5mm QFN40L package 1/2/3/4-wire PTA Wi-Fi/Bluetooth coexistence support 802.11d/h/k compliant Security support for WGA WPA/WPA2 personal,WPS2.0,WAPI Supports 802.11w proteced managed frames QoS support of WFA WMM,WMM PS Supports Wi-Fi Direct Fully compliance with USB v2.0 High-speed mode 2 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 3. EEPROM Information Reg Domain Vendor ID Product ID Worldwide Configured by driver Offset 0x39 for 2.4G:0xFF 0X148F 0X7601 4. General Specification Model Name wlan standard Host interface Main Chipset PCBA Dimension Operating conditions Voltage Operating Temperature Storage Temperature CDW-9776010-00 IEEE 802.11 b/g/n USB2.0 MTK7601U 18162.8mm(LWH) Min 2.97 V Typ 3.3 V Max 3.63 V
-20~ +60C ambient temperature
-40 ~ 80C ambient temperature Operating Humidity 5 to 90% maximumnon-condensing Electrical Specification Frequency Range Date rates OS support 2.42.4835 GHz ISM Band 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 150Mbps Windows2000,XP32-64,Vista32/64,Win732/64, Linux, Mac, AndroidWIN CE Spread Spectrum IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n:OFDM (Orthogonal Frequency Division Multiplexing) Modulation Security Output power Typical Power tolerance +/-2dB;
EVM Mode 11b 11g 11n BPSK/ QPSK/ 16-QAM/ 64-QAM WEP, TKIP, AES, WPA, WPA2 Data Rate 1,2,5.5,11Mbps 6,9,12,24,36,48Mbps 54Mbps mcs0 Power 172 162 152 172 Unit dBm dBm dBm dBm 3 / 13 CHINA DRAGON TECHNOLOGY LIMITED HT20&HT40 11b 11g 11n HT20 11n HT40 Mode 11b 11g 11n HT20 11n HT40 mcs6 mcs7 11Mbps 54Mbps mcs7 mcs7 Data Rate 11Mbps 54Mbps mcs7 mcs7 RX sensitivity 5. DC Characteristics Power Consumption Description Sleep mode RX Active,HT40,MCS7 RX Power saving, DTIM=1 RX Listen TX HT40,mcs7 @15dBm TX CCK,11Mbps @19dBm Note: All result is measured at the antenna port and VDD33 is 3.3V DC CharacteristicsUnits:V WiFi Module CDW-9776010-00 152 142
-20
-25
-28
-28 sensitivity
-85
-72
-69
-65 dBm dBm dB dB dB dB Unit dBm dBm dBm dBm TYPE Unit 1.1 151 15 6 210 242 mA mA mA mA mA mA Symbol Parameter V IL Input Low Voltage V IH Input High Voltage V OL Output Low Voltage V OH Output High Voltage 6. Reset Timing SPEC Min
-0.28 2.0
-0.28 2.4 Typ
-
-
-
-
Max 0.6 3.63 0.4 3.63 4 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 7. Pin Description NO Name Description 1 2 3 4 5 6 7 8 9 10 11 RST_N GPIO Wi-Fi RST GPIO WOL Wake on WLAN Host Interrupt(active low) NC VCC UDM UDP GND GND GND NC GND Power supply 3.3V is required USB negative differential data lines USB positive differential data lines Ground connections Ground connections Ground connections Ground connections 5 / 13 CHINA DRAGON TECHNOLOGY LIMITED 8. Modular PCB Decal size(unit:mm) WiFi Module CDW-9776010-00 16.00 2.00 2.00 2.00 11 2.00 8 2.80 0.80 1.20 1.00 18.00 1 2.00 2.00 2.00 1.90 1.00 TOP VIEW 7 2.00 BOTTOM VIEW 2.00 2.00 PCB LAYOUT Size 0-10 10-100 Tolerance(mm) 0.1 0.2 Half-borehole 0.075 6 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 9. Modular photo Specification 40Mhz 132.977601U-01 Name Crystal PCBA VER Crystal physical photo Manufacturer JWTFK A, O JWT 40MHz 3225 FK 40MHz 3225 PCBA physical photo PCBA EVENNESS PCBA PCBA Place it face up on a marble platform, or on a glass panel greater than 5mm thick, using a plug Gauge to measure the maximum corner size required0.1mm 7 / 13 CHINA DRAGON TECHNOLOGY LIMITED 10. IPEX Connector spec WiFi Module CDW-9776010-00 8 / 13 CHINA DRAGON TECHNOLOGY LIMITED 11. Shielding cover spec WiFi Module CDW-9776010-00 9 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 ESD CAUTION The CDW-9776010-00 is ESD (electrostatic discharge) sensitive device and may be damaged with ESD or spike voltage. Although CDW-9776010-00 is with built-in ESD protection circuitry, please handle with care to avoid the permanent malfunction or the performance degradation. 10 / 13 CHINA DRAGON TECHNOLOGY LIMITED Appendix 1: BOM IC CRYSTAL inductance inductance inductance inductance resistance resistance resistance resistance resistance resistance capacitance capacitance SMT IC MT7601 QFN40 MTK SMT CRYSTAL 40MHz +/-10PPM 15PF 3.2x2.5 SMT COIL 0201 18nH +/-5% Sunlord MSDCL0603C18NJTDF SMT COIL 0201 1.0nH +/-0.3nH Sunlord SDCL0603C1N0STDF SMT COIL 0201 2.7nH +/-0.3nH Sunlord SDCL0603C2N7STDF SMT COIL 2016 4.7uH +/-20% 800mA, LVS201610-4R7M-N SMT RES 0201 100K OHM 1/20W +/-5%
SMT RES 0201 2K OHM 1/20W +/-1%
SMT RES 0201 24K OHM 1/20W +/-1%
SMT RES 0201 3.4K OHM 1/20W +/-1%
SMT RES 0201 8.2K OHM 1/20W +/-1%
SMT RES 0201 97.6 OHM 1/20W +/-1%
*SMT CAP 0201 0.5pF/50V +/-0.1PF C0G EYANG C0201C0G0R5B500NTA
*SMT CAP 0201 1.0pF/50V +/-0.1PF C0G EYANG C0201C0G1R0B500NTA capacitance capacitance
*SMT CAP 0201 1.2pF/50V +/-0.1PF C0G EYANG C0201C0G1R2B500NTA
*SMT CAP 0201 5.6pF/50V +/-0.25PF C0G EYANG C0201C0G5R6C500NTA capacitance
*SMT CAP 0201 0.1uF/6.3V +/-10% X5R EYANG C0201X5R104K6R3NTA
*SMT CAP 0201 1uF/6.3V +/-20% X5R EYANG C0201X5R105M6R3NTA
*SMT CAP 0603 10uF/6.3V +/-20% X5R Samsung CL10A106MQ8NNNC
*SMT CAP 0201 22pF/50V +/-5% C0G EYANG C0201C0G220J500NTA
*SMT CAP 0201 3.3nF/16V +/-10% X7R EYANG C0201X7R332K160NTA
*SMT CAP 0201 3.9nF/16V +/-10% X7R EYANG C0201X7R332K160NTA
*SMT CAP 0201 47pF/50V +/-5% C0G EYANG C0201C0G470J500NTA
*SMT CAP 0402 4.7uF/6.3V +/-20% X5R Samsung CL05A475MQ5NRNC
*SMT CAP 0201 68pF/50V +/-5% C0G EYANG C0201C0G680J500NTA PCB FR-4 size:91.56*86.003*0.8mm 20 20181106 13*12*2mm T=0.2mm 369.0000017-00 IPX SMD 3*3.1*1.25mm(20279-001E-01)CDT-AMB-00 capacitance capacitance capacitance capacitance capacitance capacitance capacitance capacitance PCB Shield IPX WiFi Module CDW-9776010-00 1 1 2 1 2 1 1 2 1 1 1 1 1 2 3 2 9 4 1 3 1 1 1 2 1 1 1 1 U4 U5 L3L4 L12 L9 L11 L20 R14 R17 R18 R107 R16 R15 R19 C215 C237 C238 C96 C105 C1 C4C5 C48 C49 C56 C57 C58 C93 C97 C98 C103 C82 C99 C100 C104 C59 C95 C102 L1 C52 C50 C12 C84 C85 C38 CON2 11 / 13 CHINA DRAGON TECHNOLOGY LIMITED Module User Manual WiFi Module CDW-9776010-00 The purpose of this manual is to explain correct way how to integrate module CDW-9776010-00 to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and OEM product, where module integrated, complies with regulations in certain regions. Note that any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. Integration The RF module, model CDW-9776010-00 has to be installed and used in accordance with the technical installation instructions provided by the manufacturer. For detail information concerning type approval of this module please contact the authorized local distributor or the manufacturer. The system may only be implemented in the configuration that was authorized. USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Labeling The RF module CDW-9776010-00 for controller labeled as below. The label that is placed on the module is too small to hold the required FCC information, then that information appear in the user manual for this device. In addition, the Contains FCC ID :
ROWCDW-9776010-00 label also must be placed on the outside of the end product system. 12 / 13 WiFi Module CDW-9776010-00 CHINA DRAGON TECHNOLOGY LIMITED The module is limited to OEM installation only. That OEM integrators is responsible for ensuring that the end-user has no manual instructions to remove or install the module. The module is use for three antenna to choose and is use for buckle below Antenna Type Gain (dBi) NOTE External antenna External antenna External antenna 3.32 2.91 3.52 ANT2 Ant. 1 2 3 Brand N/A N/A N/A Model Name RFFPA401520I MLB301 RFFPA281353I MLB301 RFMTA340758I MAB701 ANT3 ANT1 This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instruction to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. 13 / 13