Size: 85*55 mm True wireless earbuds E-BP-19520-A ADDITIONAL FUNCTION KEYS True wireless earbuds with charging case Congratulations on your True wireless earbuds. These BT earbuds allow you to enjoy your music without wires. Please read this manual before use. NOTICE:
1. Keep the product dry; do not place the product in damp places 2. Keep out of direct sunlight and high temperatures High temperatures may result in damage 3. Keep out of cold temperatures, this will help to avoid internal damage 4. Do not disassemble the product 5. Avoid dropping the headphones 6. Do not continue to charge the headphones over 10 hours 7. When charging use the Micro USB charging cord that came with the headphones SPECIFICATIONS:
Frequency range (Hz-KHz) Continuous playing time Charging time Battery capacity Earbuds :
Battery capacity Charging station Mic function :
Pick up function :
BT version :
20Hz 20 KHz 2.5-3 hours 1.5 hours 30 mAh 300 mAh yes yes 5.0
<Press for 3 seconds>
Manually switch on and off
<Long Press 2 seconds>
Reject phone call
Switch the next song
<click>
Answer phone call
Interrupt and hang up during call
Play/Pause music
<Press 3 times>
Replay the last call PACKING LIST True wireless earbuds 1 1- Charging case 2- On/Off button Charging indicator 3- Earbuds 3. 1. 2. USING INSTRUTION INDICATOR LIGHT STATUS
and pair automatically after the indicator flashing in red /blue color for 4-5 seconds.
the last phone number.
Precaution
minutes after switch on.When the phone is out of distance,earbuds is disconnected.When return to the communication distance, the earbuds will automatically connect to the phone.
earbuds can not be connected.In this case,the mobile phone bluetooth should be turned off,When the dual earbuds light flashes red and blue, double-click one of the earbuds and it can be paired. Paring Mode Working Low Battery Charging Full charged Led light flash in red/blue color The light is off LED light flash red slowly The red light is on The red light is off FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.