FCC ID: 2AS5O-657B Waterproof Bluetooth Wireless Speaker

Users Manual WPS1 Waterproof Bluetooth Wireless Speaker Page 1 Welcome | Thank you for purchasing the WPS1 Introduction Features

- High powered Bluetooth waterproof speaker

- Wireless streaming through Bluetooth enabled devices

- Auxiliary input to play music from any device

- Automatically connects to any paired devices

- Hands-free speakerphone Built-in microphone Page 2 Whats included Unpack the speaker system and make sure all accessories are put aside so they will not be lost. Micro USB cable WPS1 Page 3 Content Introduction Features Whats Included Safety Information Warning!

Important Safety Instructions Getting Started Location of Main Unit Controls Charging the WPS1 LED Status Indicator Powering ON/OFF Operational Instructions Bluetooth Operation Setting up your WPS1 for pairing Using the auxiliary input connection (3.5mm) 11 Function-M 11 Button controls 12 12 Call function Troubleshooting Compliance with FCC Regulations Warranty Information Limited Warranty Page 4 2 3 5 6 8 9 9 9 10 10 12 12 13 14 Safety Information Warning!

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS. and arrowhead symbol within the triangle is a warning sign alerting you of dangerous voltage inside the WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer product. service personnel. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. NOTES: Caution symbols are printed on rear of unit. Please refer to users manual. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Page 5 Safety Information Important Safety Instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this users manual and on the unit. 1. Cleaning - Unplug the unit from the wall outlet before cleaning. Clean the unit using a damp cloth; do not use liquid or aerosol cleaners. 2. Attachments - Do not use attachments that are not recommended by the manufacturer. 3. Placement - Do not place the unit on an unstable table, stand, tripod, or bracket. This may result in serious personal injuries and damage to the unit. 4. Ventilation - The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as 5. ventilation openings. Periods of Non-use -

of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 6. Power Source - The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. If you are not sure, please consult the dealer or local power company. 7. Power Cord protection - Power supply cord should be routed so that it is not likely to be walked on or pinched by items placed upon or against them. It is always better to have a clear area from where the cable exits the unit to where it is plugged into an AC outlet. Page 6 8. Lightning - Unplug the unit from the wall outlet and disconnect the antenna unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 9. Overloading - Do not overload wall outlets, extension cords, or integral 10. Heat - The unit should be situated away from heat sources such as radiators, heat. 11. Damage Requiring Service -

personnel when:

A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled onto the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Servicing - The user should not attempt to service the unit beyond those methods described in the users manual. Opening or removing covers will personnel. 13. Safety Check - Upon completion of any service or repair to the unit, ask the service technician to perform safety checks to determine that the product is in proper working condition. 14. Built-in Battery Care - This device contains a rechargeable Lithium ion battery. The battery can be charged and discharged hundreds of times. Unplug the charger from the electrical outlet and product when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. Leaving the product in hot or cold places will reduce the capacity and lifetime of the battery. Page 7 Getting Started Location of Main Unit Controls Top View 1 2 3 4 5 6 7 Back View AUX DC 5V 8 9 1. Decrease Volume - |

Skip to previous track 2. LED light - charging 3. Increase Volume + |

Skip to next track 4. Play/Pause Music 5. Mode 6. LED light - Bluetooth indicator 7. Answer/End Call 8. 3.5mm Aux input 9. Micro USB charging port Page 8 Getting Started Charging the WPS1 1. Connect a Micro USB charging cable to the charging port on the WPS1. 2. Connect the USB end of the Micro USB cable to your computers USB port or an AC USB adapter. 3. When the speaker is charging, the LED indicator light located on the top panel of the speaker will turn red. 4. 2. LED Status Indicator Bluetooth LED Indicator

- Blinking Blue LED: Bluetooth on with no connection. (Ready to pair)

- Solid Blue LED: Bluetooth paired and connected Powering ON/OFF 1. To power the speaker on, press and hold the power button until you hear an ascending audible tone and the Bluetooth LED light starts blinking. hear a descending audible tone. The Bluetooth LED light will Page 9 Operational Instructions Bluetooth Operation The WPS1 connects with most Bluetooth devices inlcuding iPad devices, iPhone devices, and iPod touch devices, and most smartphones, laptops, and tablets. Setting Up Your WPS1 for Pairing 1. Turn on the WPS1 wireless speaker 2. ready to be paired with your Bluetooth device. Pairing a Bluetooth Device for the First Time 1. Navigate to the Bluetooth manager on your Bluetooth device 2. Search Bluetooth devices and select WPS1 to start connecting. 3. Once paired, the WPS1 will beep and the Bluetooth LED light will turn solid blue. 4. Your Bluetooth device is now paired, connected, and ready to Mode Button Press the Mode (M) button, to toggle between Bluetooth and Auxiliary function. Page 10 Operational Instructions Using the Auxiliary Input Connection (3.5mm) You can connect the audio output of an external device, such as a MP3 player or smartphone, to the WPS1 for listening to the audio of that device through the speaker system. 1. Use a standard stereo headphone (3.5 mm) cable to connect the headphone-out or audio line-out of the device to the aux-in jack of this speaker system. 2. Turn on the speaker system and the external device (eg. MP3-player 3. Make sure the speaker system is not connected to any or smartphone). Bluetooth devices. 4. Start playback of the external device and adjust the volume of the docking station to the desired level. 5. using the external device. Button Controls Lower volume Press and hold | - | button to decrease the volume level Increase volume Press and hold | + | button to increase the volume level Skip backward Press the | - | button to skip to the previous track Skip forward Press the | + | button to skip to the next track Call Function To answer any incoming calls, press the answer call button To end the call, press the same button again. Page 11 Troubleshooting Symptom Solution Music is not streaming over Bluetooth

- Check if both devices are paired and connected over Bluetooth.

- Make sure there isnt a 3.5mm cable connected to the aux input on the back of the speaker.

- Restart the WPS1 to auto-connect with your Bluetooth device. No power

- Recharge your speaker using included cable. If the problem cable. Battery is not charging

- Verify WPS1 is plugged in properly and into a proper power source. Power Output: 3W Play time: Up to 4-5 hours Impedance: 4 Rechargeable Battery: 3.7V/1200mAh (Built-In) Battery charging time: 2-3 hours Remarks: If troubleshooting does not eliminate the problem, disconnect the DC IN Page 12 Compliance with FCC Regulations Caution!

party responsible for compliance could void the users authority to operate the measures:

and operated to provide a separation distance of at least 20 cm from all persons THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SPEAKER SYSTEM ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. Page 13 Warranty Information Limited Warranty The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1 (888) 920-8680 from the USA or Canada. Exclusions:

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER; Concept 101 LLC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THE WARRANTY. Page 14 Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases the above exclusions or limitations may not apply to you. rights which vary from state to state. Obtaining Service:

the date of purchase, model number and a brief description of the Li-Ion 1-800-8-BATTERY. Page 15 www.att.com/electronics Page 17 FCCWarningStatement Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheusersauthoritytooperatetheequipment.Thisequipmenthasbeentestedandfoundto comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular installation. If this equipment does cause harmful interference to radio or television reception, whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto correcttheinterferencebyoneormoreofthefollowingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and

(2) this device must accept any interference received, including interference that may cause undesiredoperation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Waterproof Bluetooth Wireless Speaker AT&T

Model NO.: WPS1 Speaker: 3W. Battery: 1200mAh Input: 5V/1A FE x FCC ID:2AS50-657B Made in China GP J TTD OTN TERY WU ONG KAM KS VAAN UO On WOON uO WON OT YR a eB SRN) CRM RL ANE Aa eee ft eek Aa NT TN

China Etech Groups Ltd Agent Authorization Company: China Etech Groups Ltd Address: 16/F, Block C, 2nd Phase of Central Avenue, Haihong Industrial Area, Xixiang Road, Baoan, Shenzhen, China Product Name: Waterproof Bluetooth Wireless Speaker Model Number(s): WPS1, EBT-657B Product Description: Waterproof Bluetooth Wireless Speaker We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: Sep. 25, 2020 Signature:

Name:

Paul Huang Title:

Manger Company:

China Etech Groups Ltd

China Etech Groups Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Sep. 25, 2020 Subject; Request for Confidentiality FCC ID: 2AS5O-657B To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Paul Huang Title: Manger

Model Difference Declaration To Whom It May Concern, We, China Etech Groups Ltd(Waterproof Bluetooth Wireless Speaker) Trademark:AT&T; Model Number:WPS1, EBT-657B; All models the function, software and electric circuit are the same, only with a product model named different for commercial purpose. Test sample model:

WPS1. Please contact me if you have any question. Name: Paul Huang Title: Manger Signature of applicant:

Date: Sep. 25, 2020