FCC ID: 2AS5O-17096 Wireless Charging

Wireless Charging Parent SKU: IH-QI3002 Model: EPB-17096-B Manual SPECIFICATIONS Input5V/2A 9V/2A Output: 5V/1A 9V/1.1A Wireless Output:10W 7.5W 5W Charging distance 8mm Coil: dual coil Charging effificiency:10W@ 72% 7.5W@70% 5W@65%

Shell material:ABS Over Temperature Protection652 WORKING TEMPERATURE:0 ~ +40 STORAGE TEMPERATURE:-20 ~ +70

- For 7.5W/10W fast wireless charging a Quick Charge 2.0 or 3.0 car charger is needed.

- For standard 5W wireless charging a 5V/2A car charger is needed. Package Includes:

Air vent Wireless charging x1 USB charging cable x1 Manual x1 FUNCTION OF THE LED CHARGING INDICATOR The LED on the front is used to show the operating status of the product. - When the wireless charger is powered on with no phone on the pad the LED is green.

- When the wireless charger is powered on and there is a phone on the pad the LED is blue. -

When the phone is fully charged on the pad the LED turns green.

- If there is an error state while charging a phone the LED will turn blue and blink. To clear the problem remove the phone, check the power source and then re-seat the phone onto the wireless charge pad. APPLICABLE DEVICE FCC statement:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Page: 1 of 9 Appendix FCC ID Label FCC ID: 2AS5O-17096 TB-RF-074-3.0 Page: 2 of 9 Appendix ID Label Location ID LOCATION FCC ID: 2AS5O-17096 TB-RF-074-3.0

China Etech Groups Ltd Add: 16/F, Block C, 2nd Phase of Central Avenue, Haihong Industrial Area, Xixiang Road,Baoan, Shenzhen China Date: 2022-1-26 FCC ID: 2AS5O-17096 Dear Sir/Madam, We, China Etech Groups Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Wireless Charging Model no.: EPB-17096-B, IH-QI3002B Paul Huang/Manger China Etech Groups Ltd 16/F, Block C, 2nd Phase of Central Avenue, Haihong Industrial Area, Xixiang Road,Baoan, Shenzhen China

+86 0755-29402910 0755-29402910 huanghongping@etechgroups.com Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-1-26>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AS5O-17096 Model name EPB-17096-B For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Paul Huang/Manger Company:

Address:

China Etech Groups Ltd 16/F, Block C, 2nd Phase of Central Avenue, Haihong Industrial Area, Xixiang Road,Baoan, Shenzhen China

+86 0755-29402910 0755-29402910 huanghongping@etechgroups.com Phone:

Fax:

E-Mail:

China Etech Groups Ltd 16/F, Block C, 2nd Phase of Central Avenue, Haihong Industrial Area, Xixiang Road,Baoan, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2022-1-26 We, China Etech Groups Ltd the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AS5O-17096 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Paul Huang/Manger China Etech Groups Ltd 16/F, Block C, 2nd Phase of Central Avenue, Haihong Industrial Area, Xixiang Road,Baoan, Shenzhen China

+86 0755-29402910 0755-29402910 huanghongping@etechgroups.com