Size: mm Product Specification for 2.4G Wireless Mouse any interference received, including interference that may cause undesired operation. Exclusive Function:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept Wireless Frequency: 2402MHz-2480MHz Work Frequency: 64 hopping Rated work voltage: 1.5V Rated work electric current: 15mA Battery: AA1PCS Locomotive perceptive system: Laser Resolution: Default CPI value(800-1600) USB Port version USB1.1/2.0
*The spec above decribtion, we will not inform you if any changes. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. LM-001 2.4G wireless optical mouse Feature:
2.4G frequencydigital cordless with distance up to ten meters PAN3204 chipsethigh-precision and high- stabilization Default CPI value(800-1600) Low power remind functionchange the battery in time Warning:
Any change or modification not expressly approved by the party responsible for compliance could avoid the user s authority to operate the equipment Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This limits are designed to provide reasonable Operation protection against harmful interference in a residential installation. This equipment 1Take the mouse and receiver from the packing. Referring to pictrue one. generates radio frequency, if not installed and used according to the instructions, it may 2Open the battery coverput into 1 AA batteryPay attention to the battery polarity cause harmful interference to radio communications. However, there is no guarantee that Referring to pictrue two. interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure,
* Reorient or relocate the receiving antenna
* Increase the separation between the equipment and receiver
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 3 Pull the key to ON. The led will flash a few seconds. Referring to pictrue three. On-Off 4Plug the mini wireless receiver (Nano) into the USB port. Referring to pictrue four
*Consult with the dealer or an experienced radio/TV technician for help 5Now you can use it and enjoy it. 1Low battery remind function When you using the mouse, if the low-power indication light flickers, it shows the batteries are drains up to empty, then you should change a new battery at once Dont use old battery.Only valid for alkaline dry batteryother battery will effect the use of mouse. Sleeping function The mouse will power off by itself if you dont use it for about 8 minutes Just press any key or scroll the wheel to wake up the mouse when it is sleeping. Please turn off it when you go outside or dont use it for a long time. Turn off it if you dont use it for a long time,it will avoid to canker accessories of mouse. 3, CPI adjusting function Default CPI value is 1200. 4Built-in receiver It has a super Nano receiveryou can put it into the USB connect of PC or notebook, it will not infect your computer at all. If you just want to take the mouse outside, you can also put it into the bottom of the mouse. Reset:
It has the ID memory function automatical, please reconnect ID if you lost the memory code. High magnetic field and libration will lead to these two distinguish code disappear. you need reset it. 1Reconnect the receiver 2Press and hold on to and the scroll wheel of the mouse together for about 15 seconds . 3You are now ready to the wireless world. Remark:
This mouse uses laser light as transfer checking, it comply with correlative safe prescript, please do not look into the bottom of the mouse directly. Regards to 2.4GHZ wireless data transfer, the distance is 10 meters. The distance will be less if there are obstacles or blockage. The unsmooth or anti-optical surfaces will infect the function.