FCC ID: 2AVIMHPADIA10 TABLET PC

User Manual TABLET PC GACRUX Warranty card Your tablet comes with a 1-year manufacturers warranty for any manufacturing defects To register your product, please go to the following link:

Following are the terms and cond for the warranty:

1. The warranty covers only the product listed on this card. 2. Warranty covers any manufacturing defects which occurred within one year of the purchase. Normal wear and tear is not covered. 3. The retailer will cover the expenses for the return shipping if the defect occurs within rst 30 days. A er rst 30 days of the purchase, buyer is responsible to pay the shipping cost for sending the item for repair. 4. The average e to repair and send the unit back is about 6 weeks. 5. The manufacturer may send a replacement unit instead of repairing the defec one at his own discre 6. Please remove all your personal informa before sending the unit for repair. The manufacturer is not responsible for any loss of data or informa on. 3 Quick Start Guide This is a quick start guide only. Ceci est un guide de dmarrage rapide seulement. Dies ist eine Kurzanleitung nur. Questa solo una guida rapida. Esta es slo una gua de inicio rpido. For full user manual, please visit Pour le mode d'emploi complet , s'il vous plat visitez Fr vollstndige Bedienungsanleitung nden Sie unter Per manuale utente completo , visitare il sito El manual de usuario completo, visitar hps://frunsi.com Read me rst Please read this manual before operang your tablet and keep it for future reference. The descripons in this manual are based on the default sengs. Images and screenshots used in this manual may dier from the actual product. Available features and addional services may vary by device, soware or service provider. Our company is not liable for performance issues caused by third-party applicaons. 4 English Geng Started 1. Charge the Tablet The Tablet comes with a built-in rechargeable lithium-polymer baery. It is recommended to fully charge the baery for at least 4 hours before rst use. To charge the Tablet, plug the charger to an electrical socket with the other end of the adapter inserted to the charging slot on the Tablet (Refer to Step 1 on the previous page). You may connue to use the Tablet while it is charging. You may stop charging any me even when it is not 100% charged. The baery charge status will be indicated in the middle of the screen. Disconnect the power adapter when the Tablet is fully charged aer 4 hours. If the tablet does not power up aer charging, please insert a paper clip pin inside the Reset hole on the back and recharge the tablet again. Note: When the Tablet is connected to a computer via the USB cable, the baery will charge via the USB socket, but at a much slower rate than via the DC 5V power adapter. Do not use any other power adapters than the one supplied. Using an incompable power adapter could damage the tablet and poses the potenal risk of re. 2. Turn on the Tablet Press the power key for 5 seconds. The Frunsi logo will show up in the middle of the screen, followed by the Android logo. Wait for about 30-60 seconds for Android system to load. You will then see the welcome page. Touch Screen Acons You can control all the funcons of the Tablet by using the touch screen in combinaon with the three touch keys located at the boom of the screen. To control the Tablet, use your nger to select the icons, buons, menu, on-screen keyboard, and other items displayed on the screen. You can perform the following acons with your ngers:

Touch an opon to select it Touch and drag to move items or to scroll through lists by touching and holding, then gliding your nger over the screen. Use a nger and thumb to pinch zoom on-screen items such as photographs and web pages. 9 English Inial setup On the welcome page, scroll to select the desired language. Tap the arrow circled in green to proceed. Select a Wi-Fi network, i.e. the wireless network for Internet connecon Enter the password and wait for the connecon and system check. It may take up to 2 minutes. Sign in to your Google account If you have an exisng Google account Enter your Google email and press Next Enter your Google account password and press Next Accept the Terms of Service and Privacy Policy If you do not have a Google account yet Select Or create a new account Enter you rst name and last name and press Next Enter your desired username and press Next Create your password with at least 8 characters and press Next You will be prompted to add your phone number. You may insert your phone number or skip this step. Agree to the Privacy Policy and Terms of Service by pressing I agree Wait for about 30 seconds for the Tablet to sign in and load your account info Select backup opons, payment info accordingly (You may skip this step and change the setup later) The Home screen with a digital clock will show up. Press and swipe up the lock icon to unlock. The Tablet is now ready for use. 5. Power on and o To turn on the Tablet: Press and hold the power key unl the LCD screen turns on. Wait unl the Home screen appears. The tablet is now ready to use. To turn o/ reboot the Tablet: Press and hold the Power key unl the power o menu appears. Choose Power o to turn o the Tablet or Reboot to reboot the device. To lock screen: When the Tablet is on, press the power key once to lock screen. The tablet will enter the standby mode. Alternavely, press and hold the Power key unl the lock now menu appears. To unlock screen: When the Tablet is on but in standby mode, press the power key once to get to the unlock screen. The home screen will show up. Press and swipe up the lock icon to unlock. Disclaimer:

10 FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AVIMHPADIA10 Label and Location TABLET PC Model No.: GACRUX FCC ID : 2AVIMHPADIA10 Size: L: 5.0cm*W: 2.0cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

CHINA HAINERGY NEW ENERGY CORP.,LIMITED Agent Authorization Company: CHINA HAINERGY NEW ENERGY CORP.,LIMITED Address: Unit 1908, 19/F, Harbour Centre, 25 Harbour Road, Wan Chai, HongKong Product Name: TABLET PC Trade Mark: HPADIA10 Model Number(s): GACRUX FCC ID: 2AVIMHPADIA10 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Una Liu Title:

project manager Date: 2022-01-04 Company: CHINA HAINERGY NEW ENERGY CORP., LIMITED

CHINA HAINERGY NEW ENERGY CORP., LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AVIMHPADIA10 Date: 2022-01-04 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Software Security Requirements For U-NII Devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. External Photos Test Setup Photos Internal Photos User Manual Sincerely, Signature:

Name: Una Liu Title: project manager

CHINA HAINERGY NEW ENERGY CORP., LIMITED WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AVIMHPADIA10 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Signature:

Name / Title: Una Liu / project manager Phone: 0532-58650223 Email: liumf.hys@haierhk.com Date: 2022-01-04 Page 1 of 1 Rev.2.0

CHINA HAINERGY NEW ENERGY CORP., LIMITED FCC Software Configuration Control Declaration Date: January 04, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product Name: TABLET PC Model Number: GACRUX Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Software Configuration Control v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature:

Name:

Una Liu Title:

project manager Date: 2022-01-04 Company: CHINA HAINERGY NEW ENERGY CORP., LIMITED FCC Software Configuration Control Declaration Rev1.1