FCC ID: 2BBM4-JV600 Portable Power Station

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

Label Location On EUT Label Product Name: Portable Power Station Model No.: PPS600-515-120 FCC ID: 2BBM4-JV600 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

- Chongqing Radiance Energy Technology Co.,Ltd -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 7/18/2023

[Chongqing Radiance Energy Technology Co.,Ltd] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BBM4-JV1000 / 2BBM4-JV300 / 2BBM4-JV600 ):

Name and company of U.S. agent: Wilson Tech Service LLC Physical U.S. address of agent: 1312 17th Street Suite 692 Denver 80202 United States FRN of U.S. agent: 0033402033 Email address of U.S. agent: Wilson.Cheung.FDA@gmail.com

[Wilson Tech Service LLC] acknowledges their obligation to accept service of process on behalf of

[Chongqing Radiance Energy Technology Co.,Ltd].

[Chongqing Radiance Energy Technology Co.,Ltd] with the FRN [0033880162] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] duobi

[Title] Manager 4 0 V

[Company] Chongqing Radiance Energy Technology Co.,Ltd

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Wilson Cheung]

[Manager]

[Wilson Tech Service LLC]

The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

- Chongqing Radiance Energy Technology Co.,Ltd. -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/19/23 To whom it may concern:

We, [Chongqing Radiance Energy Technology Co.,Ltd.], hereby certify that the equipment for which authorization is sought (FCC ID: [2BBM4-JV600]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6 Signature Dobby Pi Certified Engineer Chongqing Radiance Energy Technology Co.,Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.