TJFC433 Instruction Manual for Remote Control TTJJFFCC443333 AASSKK Wireless Remote Control Version1.0 Contents 1. Overviews .............................................................................. 3 2. Product characteristics ...................................................... 3 3. SCOPE of application ......................................................... 4 4. Instructions ........................................................................... 4 5. Name Interpretation .......................................................... 4 6. Record modification ........................................................... 4 Chongqing Woao Mechanical and Electrical Co., LTD V1.0 Page 2 of 5 1 Overviews TJFC433 is a very beautiful appearance of the 1527 learning remote control, the shell, using imported high-quality flame-retardant ABS material production, metal outer ring can prevent damage, panels and buttons give a very good texture, safe and reliable use. It uses a surface acoustic resonator and a high-power RF circuit. The circuit consumes current only when the button is pressed. It does not consume power at ordinary times. It is simple to use and can work with the common ASK super-regeneration or super-heterodyne receiving circuit, it has high frequency stability 2Product characteristics 1Working Voltage: DC6V (2016 button battery two pieces) 2Operating Current: 7mA 3Static Current: 0 mA 4Operating Frequency: 433.917M 5Frequency stability: Stabilized by SAW (+-75KHZ) 6Coding chip: Learning Code (1527, etc.) 7Power: > 8mw Chongqing Woao Mechanical and Electrical Co., LTD V1.0 Page 3 of 5 8Launch Distance: > 200m (Open Space, with RM03 module receiving sensitivity of-110dbm, 1/4 wavelength single conductor)9Data rate2.4KHz 10MODULATION: Ask 11Oscillating resistance: According to Customer's requirement 12Operating temperature: -20 ~ 70 3. SCOPE of application 1Auto remote door switch (RKE) 2Remote Control Door Opening Machine, road gate;
3Wireless Security Alarm;
4Remote Control Curtain Machine;
5Wireless Industrial Controller;
6Wireless data transmission;
4Instructions Receiver to the remote control for the code learning, can be used in pairs. That is, the receiver goes into the learning receiving state (press the learning key) , then press any key of the remote control, the receiver gives instructions accordingly, when the code output by the remote control is successfully learned, the learning is complete 5. Name Interpretation TJFC433-433.917M TJFC433. Represents the remote control model 433.917M. The frequency is 433.917 Mhz 6. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant Chongqing Woao Mechanical and Electrical Co., LTD V1.0 Page 4 of 5 to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 7. Record modification Version Update date Update content Reviser Conformer V1.0 2017-06-13 Initial Version Leo Andy Chongqing Woao Mechanical and Electrical Co., LTD V1.0 Page 5 of 5