FCC ID: 2AHRPBR-30 SOUNDBAR

A T L A S EN DE FR IT ES USER MANUALHOME AUDIO CAMBRIDGE CONTENTS Contents 2 Box Contents 3 Controls & Functions 4 Setting up your Majority Atlas 6 Bluetooth, SD & USB Controls 7 Bluetooth Mode 8 USB & SD Card Mode 9 AUX mode 10 Troubleshooting 11 Spec & Warranty 12 Safety Information 13 3 YEAR WARRANTY 2 Register your product online for a FREE 3 year extended warranty at: www.majority.co.uk EN BOX CONTENTS WHATS IN THE BOX A. Majority Atlas PC Soundbar B. C. Power Adapter Instructions Guide A B C 3 EN CONTROLS & FUNCTIONS TOP VIEW 1. 2. 3. Play/Pause Previous/Rewind Indicator light FRONT VIEW 6. On/Off/Volume 4 1 2 4 5 4. Next/Fast forward 5. Mode 3 6 EN CONTROLS & FUNCTIONS BACK VIEW 7 8 9 10 7. 8. SD card slot DC 5V power input 9. USB slot 10. AUX input 5 EN SETTING UP YOUR MAJORITY ATLAS Please note that the instructions in this manual will refer to the soundbar button number e.g (Ref.*number*) in accordance with the diagrams on pages 2-3. Connecting and powering the unit Using the USB to Mini USB power cord provided, plug the mini USB connector into the back of the unit (Ref.8) and plug the other end into a USB power supply (mains adaptor or other USB power supply). Switch on your Majority Atlas Soundbar Switch the unit on by rotating the On/Off/Volume dial clockwise until the dial clicks into place and the soundbar is powered on (Ref.6). To switch the unit off, rotate the dial (Ref.6) anti-clockwise until the dial will not rotate any further. Basic operations Use the On/Off/Volume dial (Ref.6) to switch the unit on or off and change the volume. In Bluetooth, SD, or USB mode, use the button to play or pause a track, and use the

(Ref.2)/(Ref.4) buttons to skip tracks or fast forward/rewind (press and hold to rewind or fast forward) (see page 5). Press the MODE button (Ref.5) to change modes between SD card, Bluetooth, AUX and USB mode. 6 EN BLUETOOTH, SD & USB CONTROLS Please note that the following controls and functions relate to Bluetooth, SD card and USB mode only. For AUX controls and functions, please see the section titled AUX Mode (page 10). Note: in the table below, (H) = Press and hold. Soundbar button Function Reference

(H) MODE On/Off/Volume Dial Previous/next track

(Ref.2)/(Ref.4) Rewind/Fast forward

(Ref.2)/(Ref.4) Play/Pause Change mode Power On/Off/Vol-

ume+/-

(Ref.1)

(Ref.5)

(Ref.6) 7 EN BLUETOOTH MODE Connecting a Bluetooth device To connect an external device to the Atlas soundbar, ensure that the soundbar is in Bluetooth mode. Select Bluetooth mode manually by using the MODE button (Ref.5). The soundbar will sound with the phrase Bluetooth mode to indicate that Bluetooth mode is now active. Bluetooth device. devices. The soundbar indicator light (Ref.3) will flash until successfully connected to a Switch Bluetooth on for your external device. Select Majority Atlas from the list of When connected, the indicator light (Ref.3) will remain static blue. When your external device is connected, the soundbar will sound with the phrase Connected to indicate successful connection. You can now play audio through the speakers. When disconnected, the soundbar will sound with the phrase Disconnected. If the unit is switched to a different mode while Bluetooth is connected, Bluetooth will automatically be disconnected. Controls and Functions Please see page 5. 8 EN USB & SD CARD MODE USB and SD Card When a USB or SD card is inserted, the unit will automatically switch to the correct mode and begin playing audio. If necessary, select USB or SD mode using the MODE button (Ref.5). USB Insert a USB drive into the USB port at the back of the unit (Ref.9). When USB mode is selected, the soundbar will sound with the phrase USB driver mode. Maximum compatible storage: 64GB. Micro SD card Insert a micro SD card into the SD port at the back of the unit (Ref.7). When SD card mode is selected, the soundbar will sound with the phrase SD card mode. Maximum compatible storage: 64GB. Controls and Functions Please see page 5. 9 EN EN AUX MODE Use the included 3.5mm to 3.5mm AUX cable to connect an external device to the AUX input of the Majority Atlas (Ref.10). Switch to AUX mode When an AUX cable is plugged in to the AUX port at the rear of the speaker (Ref.10), the unit will automatically switch to AUX mode (indicated with Line in mode). If necessary, select AUX mode using the Mode button (Ref.5). Controls and Functions - AUX Soundbar button Function Reference MODE On/Off/Volume Dial Play/Pause Change mode Power On/Off/Vol-

ume+/-

(Ref.1)

(Ref.5)

(Ref.6) FCC Caution.

(1) 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. 10 Observation Potential Cause/Solution TROUBLESHOOTING Check whether the power is switched on or off at the wall. Check that the power adaptor is properly connected to the power outlet. Check whether MODE is correctly selected. If the volume on your device. Switch off and unplug the unit. Leave it for 2 minutes and switch it on again. Ensure that the soundbar is in Bluetooth mode and the Bluetooth on your device is switched on. Select the Bluetooth device Majority Atlas and you should now be able to play audio. No power/function Function disturbance Bluetooth not connecting SUPPORT No sound you are connected via Bluetooth or AUX, turn up If you require further assistance with your new soundbar, please contact our support team on the Majority website: wwwmajoritycouk/support 11 EN SPEC & WARRANTY SPECIFICATION Power Supply DC 5V Bluetooth 3.5mm AUX-in USB reader SD card reader 45 x 6 x 5 cm 0.80 kg Mode:

Dimensions Weight Speakers Power consumption 10W (working) 2*2 full range + 2 diaphragm Bluetooth Version 5.0 Bluetooth range up to 10 meters Compatible file types MP3, WMA, FLAC, MAV, APE Maximum compatible USB/SD 64GB storage WARRANTY All products come with a standard 12 month warranty. All items must be registered on wwwmajoritycouk for the warranty to be valid. Once on the web page, use the menu to find Register Your Product. You will also be given the chance to extend your warranty for an additional 24 months, free of charge. 12 EN SAFETY INFORMATION 1 Read these instructions 2. Keep these instructions. Instructions are also availa-

ble for download at www.majority.co.uk ADDITIONAL WARNINGS The apparatus shall not be exposed to dripping or splash-

ing and no objects filled with liquid, such as vases, shall 3. Heed all Warnings 4. Follow all instructions 5. Do not clean the apparatus near or with water 6. Do not block any ventilation openings. Install in accordance with the manufacturers instructions be places on the apparatus. Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains complete-

ly, the mains plug should be disconnected from the main 7. Do not install near any heat sources such as radiators, socket outlet completely. heat registers, stoves, or other apparatus (including Battery shall not be exposed to excessive heat such as amplifiers) that produce heat. sunshine, fire or the like. 8. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the RECYCLING ELECTRICAL PRODUCTS point where they exit from the apparatus. 9. Only use attachments/accessories specified by the manufacturer.

10. Unplug this apparatus during light storms or when You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. unused for long periods of time. Please ensure it is taken to a suitable facility for disposal 11. Refer all servicing to qualified service personnel. when finished with. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug IMPORTANT: Please read all instructions carefully before is damaged, liquid has been spilled or objects have use and keep for future reference. fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped. 12. No naked flame sources, such as lit candles, should Risk of electric shock. CA UTI O N

Do not open RISK OF ELECTRIC SHOCK DO N OT OPEN be placed on the apparatus. CA UTI O N Read all instructions carefully before use 13. Dispose of used electrical products and batteries RISK OF ELECTRIC SHOCK DO N OT OPEN and keep for future reference

safely according to your local authority and regulations.

When servicing, use only identical replacement parts CAUTION RISK O F E LEC TR IC S HO CK D O N OT O PE N

AT T EN TI ON R IS QU E D ELE CTR O CUT I ON N E PAS O UVR I R

IMPORTANT: Please read all instructions carefully before use and keep for future reference 13 EN

FCC ID LABELING AND LOCATION FCC ID Label SOUNDBAR FCC ID: 2AHRPBR-30 FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

CHRIES TECHNOLOGY CO.,LTD Model differences We:

CHRIES TECHNOLOGY CO.,LTD Statement that All the model BR-30, ATLAS, BLP9500, SR500, BR-20B, BR-50, BR-88, BR-100 are identical except model name. All above models are identical in the same PCB layout, interior structure and electrical circuits. The only difference is model name for commercial purpose. City and Country:

Date:

Name:

Function:

Signature:

(this must be a person)

(or official company stamp) Shenzhen 2020/09/10 Yang zhehao manager