MULTILINGUAL EN DE FR NL ES PT IT USER MANUAL 2017 SMANOS HOLDING LTD. All Rights Reserved. Printed in China PA: P70-QG-ML-V1.0 P70 HD WiFi Camera Overview Front View Camera LED Indicators Microphone Bracket WiFi Pairing State Red LED Indicator Realtime View Red LED Indicator Blinks once per second Blinks every 2 seconds Searching for Network Connected to a Network Privacy Mode Blue LED Indicator Constantly Blinking Blue LED Indicator Solid Red & Blue LED Indicator Solid Side View Back View Reset button microSD Card Slot Heat Vent Power Jack microSD Card (Not included) Support 32GB microSD card maximum; please do not insert the card after the camera is powered on. Note: Please format your microSD card before inserting into this slot if any file had been written in. ENEN What is inside the box Pairing Camera with WiFi through App Download the App by searching P70 camera from App Store or Google Play. P70 Camera WiFi Camera1 AC Adapter1 Quick guide1 Reset Pin1 ENEN Installation Important: This camera should be placed where the WiFi signal is strong for optimal performance. 1. Separate the mounting template on the bottom of this camera from the bracket by pressing the snap as picture shows 2. Mount the template on the wall by using the supplied screws 3. Push and press the bracket of the camera into the template carefully, and then adjust the angle to achieve best shooting effect Specifications Image sensor Min. illumination Shutter time Lens Angle of view Video compression Bit rate Max. image resolution Frame rate Storage Wireless standards Frequency range Channel bandwidth Operating conditions Power supply Power consumption Dimensions (L x W x H) Sony 1/2.9" CMOS sensor Color: 0.01Lux@ (F1.2, AGC ON) Black and white : 0.001Lux@
(F1.2, AGC ON) 1/50s to 1/100,000s 2.4mm F2.0 115 H.264 Self-adaption 1920 X 1080 20fps (1920 X 1080) Built-in microSD card slot, up to 32GB IEEE802.11b/g/n 2.412 GHz ~ 2.462 GHz 20/40MHz Support Temperature: 0 C - 60 C
(32 F - 140 F) Humidity: < 95% (non-condensing) DC 5V 1A 5W MAX 80 x 80 x 150 mm ENEN FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. IC RSS warning This device complies with ICDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le rayonnement de la classe b repecte IC fixaient un environnement non contrls.Installation et mise en uvre de ce matriel devrait avec changeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres.