RC-80 Operation Manual Features The remote control enables you to turn the alarm system on and off before entering the home or after exiting. If there is an emergency, press SOS button on the remote control to trigger the panel. RC-80, compact and portable, is designed to fit on a keychain, in a pocket, or in a purse. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Usage Appearance LED Indicator LED Indication LED flashes once: sends the transmitting signal Low light-level: Low battery, please replace the battery immediately. Specifications Power supply DC 3V (CR2025 Coin Battery x 1pc) Alarm current < 7mA Transmitting distance <80m (in open area) Radio frequency 315.8599MHz Housing material ABS plastic Operating temperature -10C~55C Relative humidity <80% (non-condensing) Dimensions (Lx WxH) 58x31x9.5mm a Press to arm the alarm panel and all of the accessories. a) Arm
(Away Mode) ay Disarm Press to disarm the security system. eS s Press to arm all sensors except the ones in zone A, ta . y sensors in zone A will not activate an alarm. (Home Mode)
. Press to activate a panic alarm and the control panel auto-dials Panic . the pre-set phone numbers immediately. re] + J Mute Arm Press to arm the system in mute.
+ ay Mute Disarm | Press to disarm the system in mute. Ver: RC-80/EN-1108-1.0