2017 SMANOS HOLDING LTD. All Rights Reserved. Printed in China Ver: SS-20-UM-ML-V1.0 EN DE FR NL ES U S E R M A N U AL PT IT SS-20 Indoor Siren Industry Canada Notice This device complies with Industry Canada licence-exempt RSS standard(s). 1. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interferencethat may cause undesired operation of the device."
2.Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Avis d'Industrie Canada Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numrique ne d passe pas les Rlements sur l'interfrence radio par un appareil num rique de classe B stipules dans les Rglement sur l'interfrence redio d'industrie Canada. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in stalled and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for help. Introduction Product Overview The SS-20 Indoor Siren will go off on-site, with a loud 90dB siren sound, to deter any would-be intruders when a sensor of K1 system has been triggered It is smart to have 2-4 sirens strategically placed around the your home as it easily deters any intruder if they defeated one siren but still hear NOISE! Intruders DO NOT like attention. Also consider a smanos SS-2800 outdoor Strobe Siren for even more noise and attention with the flashing strobe. Pairing to the K1 Hub This Siren needs to be paired to the K1 Hub first before use. To pair the Siren, please refer to the K1 Hubs user manual or in the K1 section of the smanos home app, press the "+" button and follow the instructions on the Accessories page to easily add your smanos SS-20 siren. Back View with mounting plate & level
Tamper LED Indicator Switch LED Indicator Blinks rapidly: K1 system is alarming. Blinks once per 3 seconds: Low battery, please change the batteries. Tampering Switch Anti-tampering protection ensures that any attempts to remove the cover results in the alarm sounding as well as email and push notification. Installation The Siren can be placed in any location as long as it is within the range with K1 Hub Notice: Removing the Back Cover will result in triggering the system and the siren sounding. You can disarm simply the alarm with the app or KP-20 and continue the installation. Set the entire system status to Arm and then press the Tamper Switch on the backside of the SS-
20 (as shown) to trigger an alarm which confirms the connection with K1 Hub Install the Siren using either the double-sided tape or the screws with mollys included in the package. Specifications Model: SS-20 Power: 3V CR123A Li-Mn battery x 4 pcs Sound: 90 Decibels Frequency: 915MHz Wireless range: 80 m (in open area) Operating conditions:
0-50C / 32 - 122F, humidity < 90% RH (non-condensing) Dimensions (L x W x H): 85 x 85 x 37mm / 3.35" x 3.35" x 1.46"