top back hold - on/off press - vol. down hold - prev. track press - vol. up hold - next track indicator light press - pair/aux mode hold - unpair press - play/pause/
answer/end calls hold - reject call aux port power light stand slot charge port included True Wireless Stereo (TWS) Bluetooth Speaker Micro USB Charging Cable (note: charging cable does not transfer data) Stand indicators Rapid Flashing White Light - Pairing mode Solid White - Speaker is paired Red Light - Charging No Red Light - Charging complete Ascending Tones - Power on Descending Tones - Power off Three Rapid Tones - Ready to pair Two Rapid Dings - Low battery Quick Ascending Tone - Max volume Quick Descending Tone - Min. volume pairing charging Power ON speaker When pairing for the first time the speaker will automatically enter pairing mode Use bluetooth settings on your phone to pair with HEYDAY SPEAKER 07 When the bluetooth is connected successfully you will hear a chime Plug micro end of charging cable into speaker Using the USB cable provided, plug into a USB power supply of at least DC 5V 1A warning: please use UL compliant power supply phone calls Answer/End Incoming Calls - Press the play/pause button Reject Incoming Call - Hold the play/pause button aux/line in Insert 3.5mm audio cable (not included) into speaker AUX port Insert opposite end of audio cable into the music source Switch back and forth between Bluetooth and AUX by pressing the bluetooth button while the aux cable is connected TWS (True Wireless Stereo) pairing You can pair two of this model of speaker together to get true stereo sound Turn bluetooth off on your device, place two matching speakers together, power them on Press the bluetooth button twice on one speaker - they will pair automatically Turn bluetooth on, on your device, and pair to one of the speakers When no music is being played the indicator will flash white on the speaker that is the left channel and will be solid white on the speaker that is the right channel To maintain TWS pairing turn bluetooth off on your device before powering the speakers back on, the speakers will pair automatically, then repair with your device installing the stand To install the speakear stand insert the narrow part of the stand into the stand slot, be sure not to press too hard so you do not damage the stand Make sure the stand is securely in place and not loose before setting up the speaker troubleshooting If the speaker is not working correctly, turn it on/off to reset If the speaker wont turn on, recharge the battery and try again If the speaker wont charge, make sure the power supply works, is 5V 1A, and is not damaged If the speaker makes no sound or does not show as an available device, make sure it is not paired, if so unpair and repair to the desired device You can reset the speaker to factory settings by holding the power button for 8 seconds This speaker does not have a pairing code. If you are prompted for one make sure you are connecting to the correct device. If you are forget the device and repair. If you still prompted enter 0000. need some help?
Cant get it to pair? Have a question or comment?
call us at: 877-698-4883 or: 877 - MyTgtTech online at: TargetTechSupport.com safety Do not use near any water source Do not modify or repair this device Do not use in high temperatures or extreme weather Do not use chemical detergents to clean your device, use a soft dry cloth FCC ID: 2AO23-AWSP6 Model:AWSP6 5.9 inch