Weather Station Introduction This is an ideal product for checking in-out doors temperature and humidity simultaneously. it consists of a transmitter and a weather station Features of the Transmitter Transmits outdoor temperature Wall-mounted bracket Test mode Measure outdoor temperature & hu LCD display shows time, temperature and humidity Temperature in Celsius or Fahrenheit data at 433. Milz to we:
ity autematically her station 8:30 l we. es 1, LCD display 2. Wall mounted bracket
@uousene TEMPERATURE 2 C18 c HUMIDITY 36 %
Time Temperature Humidity Alarm mode Alamn is on Test mode is switched on Flashing when signals are wansmitting. Low battery Feature of the Weather Station Indoor temperature operating range from 0C to 50C with 0. resolution. Outdoor temperature operating range from -20C to 60'C with 0.4 resolution s of Fabrenh Temperature in Cel the indoor temper Test mode rare & lnumidity automatically lay shows time, indoor/outdoor temperature and hunridity 2:30 26.8. 50)O17 SS
>4 1. LOD display 2. Set keys Weather station LCD display PM ow, | nm, acti se ble vide OF
[ou TEMP HUMIONY %] IN TEMP HUMIDITY 9 1126. 8c50 213 55 6 . 6, Humidity measured by transmitter 7. Temperature measured by transmitter a 8. Flashing antenna means receiving signals from transrnitter 9, The transmitier is in low battery 10 Test mode is switched on 4. Normal time 2. Alarm is on 3, Alarm mode
', In door humidity 5. In door temperature Getting started:
Remove botl: anits from the packaging Insert 2 ew AAA size batteties in the transmitter and check the display. Default time and temperature & humidity data should be displayed after few seconds. Insert 3 new AA size batteries in the weather station and check the display. Default time and temperature & humidity data should be displayed after few seconds. Follow the instructions on page & , set both nits to curtent time. Follow the instructions on page 9, switch both units (o test mode. Place both units at your desired location, Ensure the antenna icon of the weather st at your desired location, IC the antenna icon is not flashing, the weather station may receptionproblem. Try to take the weather station or transmitter to a new locatiost until antenna icon flashes. Ensure both units are vertically placed. Switch both units to nonnal mode. The weather station receives temperature and humidity data at certain time interval, If there is no weather information display on the weather station over 1 minute, Please ensure the transmitter work properly and repeat step 6. Using the transmitter and weather station:
ere ate four keys under the LCD display of the transmitter anc on the back of the weather station MODE fn normal mode: switch the unit into time setting mode. In time setting mode: select the setting units. ser Set the normal time and alan time(change tite value in flashing unl). AL, ON/OFF TEST In normal mode : toggle the alann owoff, ig mode: toggle the test mode on/off or Fahrenheit as the temperature nit displayed TIME SET MODE Aluem time sett Press * MODE" once to read the preset alarm time. To set the alarm time , press MODE key twice to enter this mode, S fof
'Hour" unit is flashing. 712-06 3, Press SET" key to adjust the (igure that you want. foe 4, Press MODE key , the " MINUTE unit is flast 2:00 5, Press" SET key to adjust the minate and release it when UES your desied time is reached. Press AL. ON/OFF key in normal node can toggle alarin on/off. Normal time setting:
1. Press MODE key 4 times to enter this mode, The HOUR unit is flashing 2. Press SET key to adjust the hour. 3. Press MODE key again, the MINUTE unit is flashing. 4, Press SET key to adjust the minute and retease it when your desired time is reached, TEST MODE:
Test mode is used to test the reception of the weather station from the tran:
1, Turn on the transmitter, press MODE key. Press TEST key, TEST ON symbol is displayed on the LCD. 2. Turn ont the weather station . Press MODE key first, then press TEST key , TEST ON symbol is displayed on the LCD. 3. Transmitter and the weather station are switched to fest mode In order to switch to both unit, press MODE key twice or more times till some figures are flashing, then press TEST to tum off test mode. Cantion: Test mode consumes more battery power that may reduce battery lifetime. Remarks:
1. If the weather station enters time setting mode and no key was pressed within tO seconds, it would switch to nonnal made astomatically. 2, When alarm alert, press any key to switeb off the alert 3, Weather station would switch (o normal mode under test mode within 15 minutes. Place structure the weather stat place it in a certain place, Weather station
> Hanger 10
-in a hanger and the transmitter attached with a wall mount bracket to
Wall mount bracket Transmitter How to install and replace batteries in the transmitter Maintenance 4, Take off the wall mounted bracket , Do not her stati 2. Unserew the screws on the back of the compartment and > Donor necessary heat or cold remove battery door. > Donot place the units near metal. 3, Insert 2 AAA batteries at correct polarizatiot > Do nat try to open the units. 4 ce battery door om scree > Ensure both transinitter and weather station are placed ver 5. Seal the battery cover by re-screwing the serews. Extreme temperatures , vibration and shock should be avoided.
> Remove battery if you are not intended to use the units for a long time. ny to insta atterics i ther slatis . How to install and replace the batteries in the weather slation Troubleshooting and solution I. Remove battery door at the back of compartment 2. Insert 3 AA Datteries at correct polarization. 1. find nothing display on the wansmitter and weather station, why?
3. Replace battery cover. Please ensure new battery is installed. 2. [find the transmitter and weather station doesn't work properly, Both units abnormal temperature or humidity data or segments on LCD display ace missing. Please ensure both units are working at operation temperature, Please check the specifications. 3. Can [ set the weather station to update outdoor weather information more frequently?
No, the transmitter sends information to the weather station at a fixed rate. oe > Batterydoor 4, How can I know the current time is AM or PM?
Specifications Temperature check:
Hurnidity check:
Temperature ttanst Temperature check:
Humidity check:
Temps transmit 207
-20C to 600 20%-90%6(resoh 25im{mnax.) Every 5 tninutes Every $ minutes Every 5 minutes Every 5 minutes 3V(2x AAA size) Approximately 1 year 4332MHz, 1%) 40C 0 450C F0T 0 450C Approxin 433MH2, 4.5V DC 13 Warning: Changes or modifications to this unit not expressly approved by the party tesponsibie for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to com the timits for a Class B ate designed to provide feasonable protection against harmful interference in a resident equipment generates, uses and can radiate radio frequency energy and, used in accordance with the instructions, may cause harmful interference to radio communications, not occur in a particutar inst this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one of more of the following measures: g a Reorientorrelocate the rece a Increase the separation between the equipmentand receiver.
% Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. 0 Consuttthe dealer or an experienced radio/TV technician forhetp. 14