all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
users manual | Users Manual | 899.45 KiB | ||||
1 | Block Diagram | |||||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Schematics | |||||||
1 | Schematics | |||||||
1 | Schematics | native | ||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | users manual | Users Manual | 899.45 KiB |
Contents Safety Instructions -------------------------------------------------------------------------------------------- 3 Getting Started ------------------------------------------------------------------------------------------------ 5 Desk Mounting ------------------------------------------------------------------------------------------------- 8 Wall Mounting ------------------------------------------------------------------------------------------------- 9 Cordless Telephone Operation ------------------------------------------------------------------------- 11 Preparing for Use ---------------------------------------------------------------------------------------- 11 NO LINE Indicator ------------------------------------------------------------------------------------ 11 Receiving Calls ------------------------------------------------------------------------------------------ 11 Placing Calls --------------------------------------------------------------------------------------------- 12 Using the Headset Feature --------------------------------------------------------------------------- 13 Redial Feature ------------------------------------------------------------------------------------------- 13 Caller ID System Operation ------------------------------------------------------------------------------ 14 Caller ID System ----------------------------------------------------------------------------------------- 14 Viewing Caller Information During Incoming Calls -------------------------------------- 14 MSG WAITING (Message Waiting) --------------------------------------------------------- 14 Call Waiting ------------------------------------------------------------------------------------------ 15 Voice Mail Function ------------------------------------------------------------------------------- 15 C-F (Forwarded Call) ---------------------------------------------------------------------------- 15 L-D-C (Long Distance Call) ------------------------------------------------------------------- 15 Caller List -------------------------------------------------------------------------------------------------- 15 Viewing the Caller List ---------------------------------------------------------------------------- 16 Placing a Call From the Caller List ----------------------------------------------------------- 16 Editing the Caller List before Dialing -------------------------------------------------------- 16 Saving the Name and Number in the Caller List into the DIRECTORY ---------- 17 Deleting All Records in the Caller List ------------------------------------------------------- 17 Selective Deleting in the Caller List --------------------------------------------------------- 17 Name and Telephone Number DIRECTORY -------------------------------------------------- 17 Viewing the DIRECTORY ------------------------------------------------------------------------ 17 Speed Viewing the DIRECTORY -------------------------------------------------------------- 18 1 Contents Saving in the DIRECTORY ---------------------------------------------------------------------- 18 PREFERRED CALLS ------------------------------------------------------------------------------ 18 BLOCKED CALLS ---------------------------------------------------------------------------------- 18 Editing a Name and Number in the DIRECTORY --------------------------------------- 19 Editing the Number in the DIRECTORY before Dialing ------------------------------- 20 Placing Calls from the DIRECTORY --------------------------------------------------------- 21 Deleting All Records in the DIRECTORY --------------------------------------------------- 21 Selective Deleting in the DIRECTORY ----------------------------------------------------- 21 Function Operation ------------------------------------------------------------------------------------- 22 A. Language ---------------------------------------------------------------------------------------- 23 B. Silent On/Off ------------------------------------------------------------------------------------ 23 C. Time Set ----------------------------------------------------------------------------------------- 23 D. Ringer Volume --------------------------------------------------------------------------------- 24 E. LCD Contrast ------------------------------------------------------------------------------------ 24 F. PBX Number ------------------------------------------------------------------------------------ 24 G. Flash Time -------------------------------------------------------------------------------------- 25 H. Pause Time ------------------------------------------------------------------------------------- 25 I. Voice Mail --------------------------------------------------------------------------------------- 26 J. MSG Waiting (Message Waiting) --------------------------------------------------------- 26 Telephone Keypad Characters --------------------------------------------------------------------- 27 Security --------------------------------------------------------------------------------------------------------- 28 Recharging the Battery Pack ---------------------------------------------------------------------------- 29 Changing the Battery Pack ------------------------------------------------------------------------------ 30 Problem Solving -------------------------------------------------------------------------------------------- 31 Technical Information ------------------------------------------------------------------------------------- 32 FCC Requirements ------------------------------------------------------------------------------------------ 33 Warranty -------------------------------------------------------------------------------------------------------- 35 Wall Mount Template ------------------------------------------------------------------------------------- 39 2 Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY PACK. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this telephone near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. 5. Place this telephone on a stable surface. Serious damage and/or injury may result if the telephone falls. 6. Do not cover the slots and openings on this telephone. This telephone should not be placed near or over a radiator or heat register. This telephone should not be placed in a built-in installation unless proper ventilation is provided. 7. Operate this telephone using the electrical voltage as stated on the BASE UNIT of the telephone or the Owner s Manual. If you are not sure of the voltage in your home, consult your dealer or local power company. 8. Do not place anything on the power cord. Install the telephone where no one will step or 9. Do not overload wall outlets or extension cords as this can increase the risk of fire or trip on the cord. electric shock. 10. Never push objects of any kind through slots in the telephone. They could touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the telephone. 11. To reduce the risk of electric shock do not disassemble this telephone. Take it to a qualified serviceman when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the telephone is subsequently used. 12. Unplug this telephone from the wall outlet and consult a qualified service representative in any of the following situations:
A. When the power supply cord is frayed or damaged. B. C. D. If liquid has been spilled into the telephone. If the telephone has been exposed to rain or water. If the telephone does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the telephone to normal operation. 3 Safety Instructions E. F. If the telephone has been dropped or the case has been damaged. If the telephone exhibits a distinct change in performance. 13. Do not use the telephone to report a gas leak in the vicinity of the leak. 14. Never install telephone wiring during a lightning storm. 15. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 16. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 17. Use caution when installing or modifying telephone lines. Battery Safety CAUTION:
Danger of explosion if the BATTERY PACK is incorrectly replaced. Replace only with the same or equivalent type. To reduce the risk of fire or personal injury, read and follow these instructions:
1. Use only the following type and size of BATTERY PACK:
Cordless Telephone BATTERY PACK 3.6V, 600mAh U.S. Electronics Inc. Ni-Mh BATTERY PACK: Model B655
(See page 29 for ordering information.) 2. Do not dispose of the BATTERY PACK in a fire. It may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the BATTERY PACK. Released electrolyte is corrosive and may cause damage to the eyes or skin. Electrolyte may be toxic if swallowed. 4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK with conductive materials such as rings, bracelets and keys. The BATTERY PACK or conductor may overheat and cause burns. 5. Charge the BATTERY PACK provided with (or identified for use with) this telephone only in accordance with the instructions and limitations specified in this manual. 6. Observe proper polarity orientation between the BATTERY PACK and BATTERY CHARGER. SAVE THESE INSTRUCTIONS ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check with your local solid waste officials for details in your area for proper disposal. 4 Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2. Check to be sure you have all items that come with this cordless telephone system. You should have a HANDSET, BASE UNIT, AC ADAPTER, MOUNTING BRACKET, TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD, BELT CLIP, and an OWNER S MANUAL. NEW CALL MSG WAITING 2.4 G Hz L-D-C C-F CALL BATT MSG DIR BELLSOUTH 1-212-242-6978 10:00 8/24 18 30 TOTAL AM PM NEW TALK DIR RE/PA SAVE FUNC/V.M. DELETE SCAN 1 GHI 4 PRS 7 7 DEF 3 MNO 6 WXY 9
1+
ABC 2 5 JKL TUV 8 OPER 0 10 DIAL EDIT FLASH 2 .4G Hz PAGE CHARGE IN USE HANDSET BASE UNIT MOUNTING BRACKET BELT CLIP TELEPHONE LINE CORD SHORT TELEPHONE LINE CORD AC ADAPTER BATTERY PACK 3. Insert the small plug on the end of the AC ADAPTER into the POWER-IN CONNECTION JACK at the back of the BASE UNIT. 4. Plug the AC ADAPTER into a 120V AC wall outlet. USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 300mA. 5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT. (If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE JACK ADAPTER. This adapter is available at the same place you purchased your telephone.) 6. We recommend not placing this unit next to appliances. Doing so may cause interference. 5 Getting Started BASE UNIT ANTENNA BASE UNIT TELEPHONE LINE CONNECTION JACK TELEPHONE JACK 9VDC 300mA TONE PULSE TONE/PULSE SELECT SWITCH TEL LINE
! USE ONLY WITH CLASS 2 POWER SOURCE TELEPHONE LINE CORD POWER-IN CONNECTION JACK 120V WALL OUTLET AC ADAPTER RING: HI BATTERY PACK CAUTION TO RED UCE RISK OF FIRE OR INJURY, USE ONLY SAME TYPE AND MAKE OF BATTERY PACK, Ni-Mh 3.6V, 600mAh. U.S. EL ECTRONIC S MODEL B655 FO R 2.4 GHz ANALOG HANDSET BATTERY CONNECTOR COMPARTMENT BATTERY COVER 7. Install the BATTERY PACK by plugging it into the BATTERY CONNECTOR the BATTERY COMPARTMENT. The HANDSET LCD Screen will display RING: HI. inside 8. Place the BATTERY PACK inside the BATTERY COMPARTMENT. 9. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position. 10. IMPORTANT: Before initial use, charge the HANDSET for 12 hours. 11. TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing system, set the TONE/PULSE Select Switch to the TONE position. B. If you have a rotary dialing system, set the TONE/PULSE Select Switch to the PULSE position. C. If you are unsure which system you have, set the TONE/PULSE Select Switch to the TONE position. Press the TALK button on the HANDSET and make a call. If the call connects, leave the switch as is; otherwise set to the PULSE position. 6 Getting Started ANTENNA NEW CALL MSG WAITING 2.4GHz L-D-C C-F CALL BATT MSG DIR BELLSOUTH 1-212-242-6978 10:00 8/24 18 30 TOTAL NEW AM PM TALK DIR RE/PA SAVE FUNC/V.M. DELETE SCAN HANDSET 1 GHI 4 PRS 7 7 DEF 3 MNO 6 WXY 9
1+
ABC 2 5 JKL TUV 8 OPER 0 10 DIAL EDIT FLASH DIR DELETE SCAN RE/PA SAVE Press the TALK button to confirm that you have a dial tone. If you do not get a dial tone, review steps 3 through 11. If you still do not have a dial tone, refer to the Problem Solving section on page 31. BELT CLIP HOOK With the back of the HANDSET facing up, insert one side of the BELT CLIP HOOK into the matching slot at the top side of the HANDSET. Press down on the opposite side of the BELT CLIP until the other HOOK locks into the slot on the side of the HANDSET. 13. Set the date and time. (See page 23 for details.) You are now ready to use your new BellSouth Cordless Telephone. IMPORTANT In order to utilize the Caller ID feature, you must subscribe to Caller ID service from your local telephone company. 7 Desk Mounting Desk Mounting One of the special features of your telephone is the unique design of the MOUNTING BRACKET which can hold your phone at an angle of 30o when desk mounting. There are two positions to choose from:
1. NORMAL POSITION (MOUNTING BRACKET not required):
For the normal position, as shown in Figure 1, place the BASE UNIT on any desired but suitable location. FIGURE 1 2. 30o POSITION (See Figure 2):
With the back of the BASE UNIT facing up, insert the hooks of the MOUNTING BRACKET (following the arrow direction for the DESK MOUNT) into the matching slots of the BASE UNIT (as shown in Figure 3). Then slide the MOUNTING BRACKET into place as indicated by the arrows. FIGURE 2 FIGURE 3 8 Wall Mounting Wall Mounting You may choose to put the BASE UNIT of your cordless telephone on a wall. 2. 3. 1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE CORD to the TELEPHONE LINE CONNECTION JACK. Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING BRACKET. Insert the hooks of the MOUNTING BRACKET (following the arrow direction for the WALL MOUNT) into the matching slots of the BASE UNIT (as shown below). Then slide the MOUNTING BRACKET into place as indicated by the arrows. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL JACK. 4. Align the upper keyhole on the MOUNTING BRACKET with the upper stud of the wall plate, so that the opening end of the MOUNTING BRACKET matches the lower stud, then pull the BASE UNIT down until it is securely seated. TELEPHONE LINE CONNECTION JACK SHORT TELEPHONE LINE CORD BASE UNIT MOUNTING BRACKET WALL PLATE STUD WALL PLATE BASE UNIT 9 Wall Mounting 5. This cordless telephone is designed to have a HANGER KNOB located on the BASE UNIT and a HANGER HOLE matching to the HANGER KNOB located on the back of the HANDSET to secure the HANDSET to be sat in position when wall mounting. 1. Rotate out the HANDSET KNOB by your finger tip or a small flat tool. (See Figure 1) 2. Place the HANDSET to the cradle with its LCD Screen facing you. (See Figure 2) 2.4 GHz FIGURE 1 NEW CALL MSG WAITING 2.4G Hz L-D-C C-F CALL BATT MSG DIR BELLSOUTH 1-212-242-6978 10:00 8/24 18 30 TOTAL NEW AM PM TALK DIR RE/PA SAVE FUNC/V.M. DELETE SCAN 1 GHI 4 PRS 7 7 DEF 3 MNO 6 WXY 9
1+
ABC 2 5 JKL TUV 8 OPER 0 10 DIAL EDIT FLASH PAGE CHARGE IN USE FIGURE 2 IMPORTANT: To prevent the HANDSET from falling and make sure the HANDSET is properly charged, please place the HANDSET to its cradle carefully and check there is a beep heard. 10 Cordless Telephone Operation Preparing for Use Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging of the BATTERY PACK more often. 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT. Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require more frequent charging of the BATTERY PACK. See page 29 for more information on the BATTERY PACK. NOTE:
Depending on the frequency of use, once the HANDSET is fully charged, it remains functional for approximately 4 hours of continuous use and approximately 5 days when the HANDSET is off the BASE UNIT in STANDBY mode. NO LINE Indicator This telephone will always check the TELEPHONE LINE connected to it. If NO LINE appears on the HANDSET LCD Screen in STANDBY mode, it maybe the TELEPHONE LINE is not plugged or not properly connected, or the TELEPHONE LINE plugged is not workable. When seeing this, you have to check the line connection and make sure the NO LINE is not displayed on the HANDSET LCD Screen. Otherwise your cordless telephone can not be used to receive or make a call. Receiving Calls 1. When the phone rings, lift the HANDSET and press the TALK button. The HANDSET LCD Screen will display CALLS and TALKING, and the BASE UNIT IN USE LED indicator will light up. 2. Start your conversation. 3. To end your conversation, either press the TALK button or place the HANDSET on the BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you activate the automatic STANDBY feature. 11 NEW CALL MSG WAITING 2.4GHz NO LINE CALLS TALKING . TALK DIR RE/PA SAVE FUNC/V.M. DELETE SCAN Cordless Telephone Operation NOTE:
1. The Call Timer will start to count once you press the TALK button. 2. The LCD Screen emits light for 5 seconds every time you press any of the TELEPHONE 3. When CALLS appears on the LCD Screen, it means that the HANDSET is OFF-HOOK KEYPAD buttons.
(connected to the telephone line). Minutes CALLS 00 1 14 SEC MIN Seconds Channel Placing Calls 1. Press the TALK button, the Call Timer starts to count. The HANDSET LCD Screen will display CALLS, and TALKING, and the BASE UNIT IN USE LED indicator will light up. 2. Listen for a dial tone. 3. Dial the phone number. 4. When you have finished with your call, press the TALK button again or place the HANDSET on the BASE UNIT. OR 1. Dial the phone number. 2. Press and hold down the DIAL 7 7 or the DIAL 10 or the DIAL 1+
010 OPER IN USE LED indicator will light up.
#1+
button. The BASE UNIT 3. When you have finished with your call, press the TALK button again or place the HANDSET on the BASE UNIT. 12 NEW CALL MSG WAITING 2.4 GHz CALLS TALKING . TALK DIR RE/PA SAVE FUNC/V.M. DELETE SCAN 1 GHI 4 PRS 7 7 DEF 3 MNO 6 WXY 9
1+
ABC 2 5 JKL TUV 8 OPER 0 10 DIAL EDIT FLASH Cordless Telephone Operation Using the Headset Feature Your telephone can utilize a headset (not included) to be connected to your HANDSET for you to enjoy hands-free communication. Insert the small plug at the end of the headset into the HEADSET JACK at the right side of the HANDSET. Follow the procedures discussed in Receiving Calls and Placing Calls to receive and place a call. NOTE: When you plug the headset plug into the HEADSET JACK it automatically mutes the MICROPHONE and SPEAKER of the HANDSET. Unplug the headset to return the HANDSET to normal use. Headsets are available at most retail outlets that sell telephone equipment. The HEADSET JACK is compatible with 2.5 mm headset plugs only. Redial Feature 1. If you get a busy tone, press the TALK button or place the HANDSET on the BASE UNIT to hang up. 2. Later, press the TALK button again. 3. Listen for a dial tone. RE/PA SAVE 4. Press the button. This will automatically redial the last telephone number you called in TALK mode. 5. When you have finished with your call, press the TALK button again (the BASE UNIT IN USE LED indicator will turn off) or place the HANDSET on the BASE UNIT. HEADSET MICROPHONE SPEAKER HEADSET PLUG
(2.5mm) HEADSET JACK NEW CALL MSG WAITING 2.4GHz TALK DIR RE/PA SAVE 1 FUNC/V.M. DELETE SCAN ABC 2 DEF 3 MNO NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits beep sounds to warn you that the background noise level is too high for proper communication between the HANDSET and the BASE UNIT. When you hear this sound, you should move closer to the BASE UNIT to reduce the noise level. Otherwise, the call will automatically cut off. 13 Caller ID System Operation Caller ID System This telephone automatically displays an incoming caller s name and telephone number together with the date and time of the call. It records up to 80 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature. Viewing Caller Information During Incoming Calls 1. When there is an incoming call, the name and the telephone number of the caller will button to view a automatically appear after the second ring. Press the SHIFT RIGHT name of more than 11 characters. MICHAEL BROW 6 0 4 - 5 5 5 - 1 2 1 2 10:00 8/24 1 NEW AM
BROWING 6 0 4 - 5 5 5 - 1 2 1 2 10:00 8/24 1 NEW AM
Number of calls recorded Time Month/Date e.g. OUT OF AREA O- - - - - - - - - -
10:00 8/24 13 42 OR Callers telephone number will appear if the callers name is not available. OR OUT OF AREA will appear if the origin of the incoming call does not support the Caller ID system. OR UNKNOWN will appear if the origin of the incoming call has no name and does not support the Caller ID system. OR PRIVATE and/or P--------- will appear if the caller s name and/or telephone number is blocked. OR DATA ERROR will appear if wrong data was received from the telephone line. OR The name stored in the DIRECTORY will appear for an incoming call with matching telephone numbers. UNKNOWN U- - - - - - - - - -
10:00 8/24 13 42 e.g. TOTAL TOTAL NEW NEW AM AM
MSG WAITING (Message Waiting) The MSG WAITING GREEN LED indicator will blink when there is a message for you from your telephone company if you have subscribed to Voice Mail message service and if you have requested Visual Message Indication from your local telephone company. MSG WAITING will appear on the LCD Screen in STANDBY mode. (To remove the MESSAGE WAITING indicator, see page 26 for detail.) 14 Caller ID System Operation JOHN BROWN 2 3 5 - 6 0 7 - 5 5 1 2 10:00 8/24 13 NEW AM 1st Caller Call Waiting When you subscribe to a Call Waiting service from your local telephone company, this telephone will display the name and number of the second caller while you are having a conversation with your first caller. 1. When you are having a conversation, this telephone will automatically display the name and number of the second caller. The name will be blinking. e.g. 2. Press the FLASH button to answer the second caller. The first caller s name and number will be displayed. The name will be blinking. e.g. ALEX BROWTH 5 0 4 - 5 5 5 - 1 2 1 2 10:00 8/24 14 3. When you have finished, press the FLASH button to continue with your conversation with the first caller. If you do not want to interrupt your phone conversation with the first caller, you can advise the second caller to leave a Voice Mail message instead. Voice Mail Function When there is a Voice Mail message for you, this telephone detects a Stutter Dial Tone (if applicable) and the MSG icon on the LCD Screen and the MESSAGE WAITING LED indicator will blink. 1. To access your Voice Mail message, press the TALK button. 2. After you hear a dial tone, press the button. This will automatically dial the 2nd Caller NEW AM FUNC V.M. Voice Mail Post Code in your area and connect you to the Voice Mail service provider. NOTE: You must store the Voice Mail Post Code number by using the VOICE MAIL function on page 25. You can also call your Voice Mail service provider by dialing the Voice Mail Access Code number after pressing the TALK button. C-F (Forwarded Call) Appears on the upper left hand side, when the incoming call has been assigned to your telephone number. L-D-C (Long Distance Call) Appears on the upper left hand side, when the incoming call is a long distance call and the service is provided by your local telephone company. Caller List Record call information for up to 80 incoming calls such as caller s name and telephone number together with the date and time of the call. After recording a new incoming call, the NEW CALL indicator will blink and the display will look as shown below:
RING: HI 10:00 8/24 13 42 TOTAL NEW AM No. of new calls Maximum calls= 80 15 Caller ID System Operation Viewing the Caller List 1. Press the SCROLL DOWN button to view the latest Caller ID record, or press the SCROLL UP button if the name has more than 11 digits. button to view the first Caller ID record, press the SHIFT RIGHT MICHAEL BROW 6 0 4 - 5 5 5 - 1 2 1 2 10:00 8/24 1
NEW AM BROWING 6 0 4 - 5 5 5 - 1 2 1 2 10:00 8/24 1
NEW AM 2. Press the DIR button to go back to STANDBY mode. (If no active buttons are pressed for 20 seconds or you have viewed the last Caller ID record in the Caller s List, the LCD Screen will automatically return to STANDBY mode.) Placing a Call from the Caller List 1. Press the SCROLL DOWN button to select from the latest Caller ID record, or press the SCROLL UP button to select from the first Caller ID record. 2. Press and hold down the DIAL 7 7 button for a local call, or the DIAL 10 010 OPER button for a local call with area code, or the DIAL 1 +
#1+
button for a long distance call. 3. To end your conversation, either press the TALK button or place the HANDSET on the BASE UNIT. To place a call from the Caller List in TALK mode, press the TALK button, then follow steps 1 to 3. NOTE: You can edit the number before dialing, but you cannot SAVE any changes in the Caller List. Editing the Caller List before Dialing 1. Press the SCROLL UP 2. Press the EDIT button. 3. Move the cursor by pressing the SHIFT LEFT want to change. To erase digits, press the or DOWN button to find the caller. or RIGHT button to the digit you SCAN DELETE button. To add digits, use the TELEPHONE KEYPAD
~010 4. Press and hold down the DIAL 7 OPER 9WXY buttons. 7 button for a local call, or the DIAL 10 010 OPER button for a local call with area code, or the DIAL 1 +
#1+
button for a long distance call. 5. To end your conversation, either press the TALK button or place the HANDSET on the BASE UNIT. To save the edited record from the Caller List, follow steps 1 to 3 then press and hold down the RE/PA SAVE button. 16 Caller ID System Operation Saving the Name and Number in the Caller List into the DIRECTORY 1. Press the SCROLL UP button to find the caller. 2. Press and hold down the NOTE: It is not advisable to save a telephone number without the corresponding name. This will lead to improper display on Anonymous (Private) and Unknown (Out of Area) calls. or DOWN RE/PA SAVE button. Deleting All Records in the Caller List 1. Press and hold down the 3 seconds while in STANDBY mode. SCAN DELETE button for at least 2. The LCD Screen will automatically return to STANDBY mode. ALL DELETE 10:00 8/24 0 0 TOTAL NEW AM Selective Deleting in the Caller List 1. Press the SCROLL UP or DOWN STANDBY mode. button to find the Caller ID record while in 2. Press and hold down the SCAN DELETE button for at least 3 seconds, then the LCD Screen will display the next Caller ID record in the DIRECTORY. 3. Press the DIR button to return to STANDBY mode. DELETE 10:00 8/24 2 AM
Name and Telephone Number DIRECTORY This DIRECTORY lets you scroll through the list to find the record you need for one touch dialing. You can store up to 40 names and telephone numbers in the memory. Viewing the DIRECTORY 1. Press the DIR button. DIR DIRECTORY NEW CALL MSG WAITING 2.4 GHz 10:00 8/24 12 TOTAL AM No. of records stored 2. Press the SCROLL UP or DOWN one you need, press the SHIFT RIGHT name or telephone number is more than 11 digits. button to find the button if the DIR MICHAEL BROW 6 0 4 - 5 5 5 - 1 2 1 2 8 12 TOTAL
DIR BROWING 6 0 4 - 5 5 5 - 1 2 1 2 8 12 TOTAL
NOTE: To exit the DIRECTORY List at anytime, press the DIR button. 17 L-D-C C-F CALL BATT MSG DIR BELLSOUTH 1-212-242-6978 10:00 8/24 18 30 TOTAL NEW AM PM TALK DIR RE/PA SAVE 1 FUNC/V.M. DELETE SCAN ABC 2 DEF 3 MNO Caller ID System Operation Speed Viewing the DIRECTORY 1. Press the DIR button. 2. Enter the first letter of a name. (See Page 27 for detail of entering a letter.) 3. Press the SCROLL DOWN button to find all names with same first letter. Saving in the DIRECTORY 1. Press the DIR button. 2. Press the EDIT button. 3. Use the TELEPHONE KEYPAD for detail) you can store up to 15 characters.
~010 OPER 9WXY buttons to enter the name, (see page 27 4. Press the SCROLL DOWN button once. 5. Enter the telephone number using the TELEPHONE KEYPAD You can store up to 16 digits. 6. Press and hold down the RE/PA SAVE button.
~010 OPER 9WXY buttons. 7. Press the DIR button to go back to STANDBY mode.
(If no active buttons are pressed for 20 seconds, the LCD Screen will automatically return to STANDBY mode.) NOTE: It will not save a duplicate telephone number or a name without the corresponding telephone number in the DIRECTORY. PREFERRED CALLS You can assign PREFERRED CALL which will generate a special ringer sound at the start of the second ring to any welcome caller in the DIRECTORY. When you are saving the name and number into the DIRECTORY, add a # mark at the beginning of the name by pressing the button.
#1+
BLOCKED CALLS You can assign BLOCKED CALL which will disable the ringer sound from the second ring to any caller in the DIRECTORY. When you are saving the name and number into the DIRECTORY, add an mark at the beginning of the name by pressing the button. 7 18 Caller ID System Operation Editing a Name and Number in the DIRECTORY 1. Press the DIR button. 2. Press the SCROLL UP or DOWN button to find the record you want to edit. DIR MICHAEL BROW 6 0 4 - 5 5 5 - 1 2 1 2 8 12 TOTAL
3. Press the EDIT button to edit the name. DIR MICHAEL BROW 6 0 4 5 5 5 1 2 1 2 8 12 TOTAL
cursor is blinking 4. Press the SCROLL LEFT or RIGHT number you want to change. To erase, press the button to move the cursor to the letter or SCAN DELETE button. To add, use the TELEPHONE KEYPAD 5. Press the SCROLL UP OPER 9WXY
~010 or DOWN buttons. (See page 27 for details.) button to edit the number. 6. Press the SCROLL LEFT or RIGHT want to change. To erase, press the button to move the cursor to the number you SCAN DELETE button. To add, use the TELEPHONE KEYPAD
~010 OPER 9WXY buttons. (See page 27 for details.) DIR MICHAEL BROW 6 0 4 5 5 5 1 2 1 2 8 12 TOTAL
cursor is blinking 7. Press and hold down the RE/PA SAVE button to confirm. IMPORTANT: It is not advisable to save a telephone number without the corresponding name in the DIRECTORY. This will lead to improper displays on PRIVATE and OUT OF AREA calls. NOTE: When no active buttons are pressed for 20 seconds, the LCD Screen will automatically return to STANDBY mode. 19 Caller ID System Operation Editing the Number in the DIRECTORY before Dialing 1. Press the DIR button. or DOWN 2. Press the SCROLL UP 3. Press the EDIT button to edit the name. 4. Press the SCROLL DOWN e.g. button. DIR MICHAEL BROW 6 0 4 5 5 5 1 2 1 2 1 12 TOTAL
button to find the caller. cursor is blinking 5. Press the SCROLL LEFT or RIGHT button to move the cursor to the number you want to change. To erase, press the SCAN DELETE button. To add, use the TELEPHONE KEYPAD
~010 OPER 9WXY buttons. 6. Press and hold down the DIAL 7 7 button for a local call, or press and hold down the 010 OPER button for a local call with area code, or press and hold down the DIAL 1+
DIAL 10
#1+
button for a long distance call. 7. To end your conversation, either press the TALK button or place the HANDSET on the BASE UNIT. NOTE: If you want to save the edited number in the DIRECTORY, follow steps 1 through 5 and then press and hold down the RE/PA SAVE button. 20 Caller ID System Operation Placing Calls from the DIRECTORY 1. Press the DIR button. 2. Press the SCROLL UP or DOWN button to find the record you want to call. 3. Press and hold down the DIAL 7 7 button for a local call, or press and hold down the 010 OPER button for a local call with area code, or press and hold down the DIAL 1+
DIAL 10
#1+
button for a long distance call. 4. To end your conversation, either press the TALK button or place the HANDSET on the BASE UNIT. Deleting All Records in the DIRECTORY 1. Press the DIR button. 2. Press and hold down the mode. SCAN DELETE button for at least 3 seconds while in DIRECTORY ALL DELETE 10:00 8/24 0 TOTAL AM 3. Press the DIR button to return to STANDBY mode. Selective Deleting in the DIRECTORY 1. Press the DIR button. 2. Press the SCROLL UP or DOWN button to find the record you want to delete. 3. Press and hold down the SCAN DELETE button for at least 3 seconds, then the LCD Screen will display the next record in the DIRECTORY. DELETE
5 12 TOTAL 4. Press the DIR button to return to STANDBY mode. 21 Caller ID System Operation Function Operation This unit contains the following special functions:
A. LANGUAGE B. SILENT ON/OFF C. TIME SET D. RINGER VOLUME E. LCD CONTRAST F. PBX NUMBER G. FLASH TIME H. PAUSE TIME I. VOICE MAIL J. MSG WAITING To access, press the FUNC V.M. button at STANDBY mode, then press the TELEPHONE KEYPAD
~010 OPER 9WXY button or the SCROLL UP or DOWN button. ENGLISH SILENT 1 10
TOTAL OFF 2 10
TOTAL TIME SET 10:00 8/24 3 10 TOTAL AM
KEYPAD Button 1 KEYPAD Button 2ABC KEYPAD Button 3DEF RING: HI CONTRAST 5 PBX NO. OFF 10:00 8/24 4 10 TOTAL AM
10:00 8/24 5 10 TOTAL AM
10:00 8/24 6 10 TOTAL AM
KEYPAD Button 4GHI KEYPAD Button 5JKL KEYPAD Button 6MNO FLASH TIME 600 10:00 8/24 7 10 TOTAL AM
PAUSE TIME 4 VOICE MAIL 10:00 8/24 8 10 TOTAL AM
10:00 8/24 9 10 TOTAL AM
KEYPAD Button 7PRS KEYPAD Button 8TUV KEYPAD Button 9WXY MSG WAITING OFF 10:00 8/24 10 10 TOTAL
AM KEYPAD Button 010 OPER 22 Caller ID System Operation A. Language This telephone offers English, Spanish, and French languages for your convenience. 1. Press the button. FUNC V.M. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Press the SCROLL UP 1 button. or DOWN button to select the type at language you desire. You can also set the language by pressing the following TELEPHONE KEYPAD buttons;
for French. English is the preset language. 1 for English, for Spanish, or 2ABC 3DEF 5. Press and hold down the RE/PA SAVE button. 6. Press the FUNC V.M. button to return to STANDBY mode. B. Silent On/Off This telephone will generate the first ring sound even in the BLOCKED CALL mode to indicate that you have an incoming call. To keep the ringer silent in BLOCKED CALL mode, you can turn off the first ring sound. 1. Press the button. FUNC V.M. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Press the SCROLL UP or DOWN 2ABC button. You can also press the TELEPHONE KEYPAD buttons;
SILENT OFF is the preset mode. RE/PA SAVE 5. Press and hold down the button. button to select the SILENT ON/OFF setting. for OFF. 1 for ON or 2ABC 6. Press the FUNC V.M. button to return to STANDBY mode. C. Time Set Set the date and time. 1. Press the FUNC V.M. button. 3DEF 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Use the TELEPHONE KEYPAD button to enter the month, date, hour and minute. The cursor moves automatically after entering each item. Press the TELEPHONE KEYPAD button. 1 for AM setting, or press the TELEPHONE KEYPAD 2ABC for PM setting. 23 Caller ID System Operation 5. Press and hold down the RE/PA SAVE button. 6. Press the NOTE: The date and time will automatically set, if you have subscribed to the Caller ID button to return to STANDBY mode. FUNC V.M. service from your local telephone company. D. Ringer Volume This function enables you to adjust the ringer volume from HI, LOW and OFF as desired. 1. Press the button. FUNC V.M. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Press the SCROLL UP 4GHI button. or DOWN button to adjust the ringer volume suitable for your convenience. You can also adjust the ringer volume by pressing the following TELEPHONE KEYPAD buttons;
for OFF. HI is the preset ringer volume. 1 for HI, for LOW, or 2ABC 3DEF 5. Press and hold down the RE/PA SAVE button. 6. Press the FUNC V.M. button to go back to STANDBY mode. E. LCD Contrast This unit enables you to select 8 brightness levels for the Large LCD Screen. 1. Press the button. FUNC V.M. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Press the SCROLL UP or DOWN Screen. Level 5 is the preset brightness. 5JKL button. button to adjust the brightness of the LCD 5. Press and hold down the RE/PA SAVE button until a confirmation beep is heard. 6. Press the FUNC V.M. button to go back to STANDBY mode. F. PBX Number This unit enables you to preset the PBX number (such as an 8 or 9) while you are using a switchboard system. FUNC 1. Press the V.M. button. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 6MNO button. 24 Caller ID System Operation 4. Press the SCROLL UP or DOWN button. (OFF is the preset PBX number.) PBX MODE OFF - set for direct line access. button. 5. Press and hold down the RE/PA SAVE 6. Press the FUNC V.M. button to go back to STANDBY mode. NOTE: When placing a call by using the DIAL 7 7 or the DIAL 10 010 OPER or the DIAL
#1+
button, this telephone will automatically add the PBX number and a 1+
pause time before the dialed telephone numbers. G. Flash Time This unit enables you to select the standard FLASH TIME applicable to your calling area. If you are not sure of the FLASH TIME you are using, call your local telephone company. 1. Press the button. FUNC V.M. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Press the SCROLL UP 7PRS button. button to select the FLASH TIME. You can also set the FLASH TIME by entering the FLASH TIME number using the TELEPHONE KEYPAD or DOWN
~010 OPER 9WXY buttons. The preset FLASH TIME is 600 milliseconds. 5. Press and hold down the RE/PA SAVE button. 6. Press the FUNC V.M. button to go back to STANDBY mode. H. Pause Time This unit enables you to adjust the PAUSE TIME when placing a call using a switchboard system or dialing long distance calls. 1. Press the button. FUNC V.M. 8TUV button. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Press the SCROLL UP pause time is 4 seconds. 5. Press and hold down the RE/PA SAVE button. or DOWN button to adjust the pausing time. The preset 6. Press the FUNC V.M. button to return to STANDBY mode. 25 Caller ID System Operation I. Voice Mail This telephone enables you to store the Voice Mail Access Code number in your area. This will automatically connect you to the Voice Mail service provider with one-touch dialing. 1. Press the button. FUNC V.M. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD button. 9WXY
~010 OPER 9WXY buttons. 5. Press and hold down the RE/PA SAVE button. 6. Press the FUNC V.M. button to go back to STANDBY mode. J. MSG Waiting (Message Waiting) To turn off the Message Waiting LCD Screen indicator. 1. Press the button. FUNC V.M. 010 OPER button. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT button. 4. Press the SCROLL UP 5. Press and hold down the button. or DOWN RE/PA SAVE button. FUNC V.M. button to go back to STANDBY mode. 6. Press the IMPORTANT: Message Waiting LCD indicator will automatically turn ON, if you have subscribed to Voice Mail message service and if you have Visual Message Indication from your local telephone company. IMPORTANT In order to utilize the Caller ID feature, you must subscribe to Caller ID service from your local telephone company 26 Caller ID System Operation Telephone Keypad Character The TELEPHONE KEYPAD names. Press the appropriate TELEPHONE KEYPAD button to get the following characters. buttons are used to enter characters when entering OPER
~010 9WXY KEYPAD BUTTONS 1 2 3 4 5 6 7 8 9
0
CHARACTERS SPACE & ' ( ) * . 1 A B C 2 D E F 3 G H I 4 J K L 5 M N O 6 P Q R S 7 T U V 8 W X Y Z 9
0
EXAMPLE:
If you want to enter the character ACE on the HANDSET LCD Screen. 1. Press the DIR button. 2. Press the EDIT button. 3. Press the TELEPHONE KEYPAD 2ABC button, A will be displayed. Press the SHIFT RIGHT button to move the cursor to next (See NOTES below.). 4. Press the TELEPHONE KEYPAD button three times to display C. 5. Press the TELEPHONE KEYPAD NOTES:
1. To enter the next character, press the appropriate button. If, however, the next character is on button two times to display E. 2. the same button as the previous character, you will first need to press the SHIFT RIGHT button. Pressing the SHIFT RIGHT If you want to change any character, you can go back to the incorrect character by pressing the SHIFT LEFT button. button. To delete the character inside the cursor , press the button a second time will produce a space. SCAN DELETE 3. You can store a maximum of 15 characters on the letter icon. 4. You can store a maximum of 16 digits on the number icon. 27 2ABC 3DEF Security Security System Your cordless telephone uses a digital coding security system to prevent unauthorized use of your telephone line by another nearby cordless telephone. The system has its own identifying signal created by microcomputers in both the BASE UNIT and the HANDSET. Security Code This telephone has an internal security code with 65,536 possible combinations. Resetting Security Code and Channel Information Communication between the HANDSET and the BASE UNIT may not be possible in any of the following situations:
1. After a power failure. 2. After relocating the BASE UNIT by disconnecting the AC ADAPTER. 3. After replacing the HANDSET BATTERY PACK. To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds. Multi-Channel Access Your cordless telephone lets you select a channel from the 40 frequencies available to transmit signals between the BASE UNIT and HANDSET. When you notice interference from other cordless telephones, change to another channel by pressing the SCAN DELETE button on the HANDSET. 28 Recharging the BATTERY PACK Battery Type Use the following type and size of BATTERY PACK:
Cordless Telephone BATTERY PACK 3.6V, 600mAh U.S. Electronics Inc. Ni-Mh Battery Pack: model B655 This BATTERY PACK is available through:
U.S. Electronics Service Center 105 Madison Avenue New York, NY 10016 1-800-825-5208 NOTE: During a power interruption, the BASE UNIT does not operate, and a phone conversation cannot be made on the HANDSET. Recharging the Battery Pack The nickel metal hydride (Ni-Mh) BATTERY PACK in the HANDSET can be recharged many times using the built-in charger in the BASE UNIT. When the BATT LOW symbol appears on the LCD Screen, a beep sound will be heard every 10 seconds. This indicates that the BATTERY PACK needs to be recharged. Charge the BATTERY PACK at least once every 90 days of non-use to avoid battery failure. When the BATTERY PACK can no longer be charged, replacement of the BATTERY PACK will be necessary. The BATTERY PACK used in your telephone may develop a condition known as MEMORY. Once subjected to a regular short discharging routine, the BATTERY PACK assumes the discharging pattern it was subjected to. This is known as a MEMORY condition which causes rapid discharging thereby shortening the BATTERY PACK charge span. If you believe your BATTERY PACK has developed a MEMORY condition, do not charge the HANDSET until the BATT LOW symbol appears on the LCD Screen. When the BATT LOW symbol appears on the LCD Screen, charge the HANDSET fully for 12 hours. IMPORTANT In order to get maximum life from the HANDSET BATTERY PACK, be sure to charge the HANDSET for 12 hours before initial use. 29 Changing the BATTERY PACK Changing the Battery Pack The BATTERY PACK provides power for the HANDSET of your cordless telephone. To Replace BATTERY PACK:
1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down. 2. Pull out the BATTERY PACK PLUG and remove the BATTERY PACK. 3. Plug the new BATTERY PACK into the BATTERY CONNECTOR. 4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position. 5. Before use, charge the new BATTERY PACK for 12 hours. ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check with your local solid waste officials for details in your area for proper disposal. CAUTION TO REDUCE RISK OF FIRE OR INJURY, USE ONLY SAME TYPE AND MAKE OF BATTERY PACK, Ni-Mh 3.6V, 600mAh. U.S. ELECTRONICS MODEL B655 FOR 2.4 GHz ANALOG HANDSET BATTERY CONNECTOR COMPARTMENT BATTERY COVER BATTERY PACK PLUG BATTERY PACK Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down. 30 Problem Solving Problem Solving Section For your assistance, we have listed below a few common problems. Phone does not work, check the following:
1. BASE UNIT is plugged into a power source. 2. HANDSET is charged. 3. TONE/PULSE Select switch is in the right position. 4. TELEPHONE LINE CORD is plugged into the TELEPHONE JACK. Range of phone limited, check the following:
1. BASE UNIT is centrally located in your residence. 2. BASE UNIT is not located near appliances. No dial tone, check the following:
1. TELEPHONE LINE CORD plugs are connected to the TELEPHONE JACK and TELEPHONE LINE CONNECTION JACK. 2. BASE UNIT is plugged into power source. 3. If you had a power failure or had unplugged the BASE UNIT, replace the HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system. Received signal flutters or fades, check the following:
1. BATTERY PACK in the HANDSET is fully charged. 2. HANDSET is not too far from the BASE UNIT. Interference on reception, check the following:
1. Noise may be picked up from electrical products in the home or electrical storms. Generally, this noise is a minor annoyance and should not be interpreted as a defect in your system. (See Technical Information on page 32.) 2. Choose an alternate channel using the 3. Do not use this telephone within 20 ft. of a microwave oven while it is working, as you may experience interference. This is a normal occurrence with 2.4GHz phones and should not be interpreted as a defect in the product. SCAN DELETE button on the HANDSET. Long Distance L-D-C indicator is not ON when receiving a long distance call, check the following:
1. Your local telephone company can provide the Area Code on an incoming long distance call. Excess static, check the following:
1. Check to see that the ANTENNA is not touching another metal object. If after pressing the TALK button, you receive three beeps and no dial tone, check the following:
1. BASE UNIT is plugged into a power source. 2. If you had a power failure or had unplugged the BASE UNIT, replace the HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system. NOTE: If none of telephones in the house are working, disconnect one set at a time to verify that none of the phones are causing the problem. If you still have a problem after doing this, and your telephone still does not work, please contact your local phone company. 31 Technical Information Technical Information This cordless telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. Noise Electrical pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms. Certain kinds of electrical equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio frequencies are susceptible to these noise pulses, you may occasionally hear them in your HANDSET. Generally they are a minor annoyance and should not be interpreted as a defect in your system. Range Because radio frequency is used, the location of the BASE UNIT can affect the operating range. Try several locations in your home or office and pick the one that gives you the clearest signal to the HANDSET. Interference Electronic circuits activate a relay to connect the cordless telephone to your telephone line. These electronic circuits operate in the radio frequency spectrum. While several protection circuits are used to prevent unwanted signals, there may be periods when these unwanted signals enter the BASE UNIT. You may hear clicks or hear the relay activate while you are not using the HANDSET. If the interference occurs frequently, it can be minimized or eliminated by relocating the BASE UNIT. You can check for interference before selecting the final BASE UNIT location by plugging in the telephone. NOTICE:
This cordless telephone uses radio communication between the HANDSET and the BASE UNIT and may not ensure privacy of communication. Other devices, including another cordless telephones, may interfere with the operation of this cordless telephone or cause noise during operation. Units not containing coded access may be accessed by other radio communication systems. Cordless telephones must not cause interference to any licensed radio service. IMPORTANT When you hear interference, press the SCAN button to change the operating channel. 32 FCC Requirements Federal Communications Commission Requirements This equipment complies with Part 68 of the FCC rules. A label on the BASE UNIT of the equipment contains, among other information, the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company. The REN is also useful in determining the number of devices that you may connect to your telephone line and still allow all of these devices to ring when your telephone number is called. In most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices that you may connect to your line, contact your local telephone company. If your equipment should cause harm to the telephone network, the telephone company may temporarily disconnect your service. If possible, they will notify you in advance that temporary discontinuance of service may be required. However, when advance written notice is not possible, the telephone company may temporarily discontinue service without notice if such action is necessary under the circumstances. The telephone company may make changes in its communication facilities, equipment, operations, or procedures where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regulations of the Federal Communications Commission. Do not attempt to repair or modify this equipment. Warning: Changes or modifications not expressly approved by the party responsible for its compliance could void the user s authority to operate the equipment. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the BASE UNIT of the cordless telephone should not be placed on or near a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. This equipment should not be used on coin telephone lines. Connection to party line service is subject to state tariffs. If trouble is experienced, disconnect this equipment from the telephone line to determine if it is causing the malfunction. If the equipment is determined to be malfunctioning, its use should be discontinued until the problem has been corrected. IMPORTANT IMPORTANT Placing your BASE UNIT near appliances such as In order to get maximum life from the HANDSET televisions, refrigerators, radios, or microwave ovens battery pack, be sure to charge the HANDSET for 12 may cause interference. hours before initial use. 33 FCC Requirements Federal Communications Commission Requirements (continued) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving ANTENNA. Increase the distance between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received including interference that may cause undesired operation. 34 Warranty Warranty Information BellSouth Products One-Year Limited Warranty This limited warranty sets forth all BellSouth Products responsibilities regarding your telephone. There are no other expressed or implied warranties from BellSouth Products. Warranty Service Provided If you purchased the telephone new from a retail vendor, BellSouth Products warrants the telephone against defects in material and workmanship for a period of one (1) year from the original date of purchase. This warranty is in lieu of all other express warranties. This warranty begins when you purchase the telephone and continues for one (1) year unless you sell or rent the telephone, in which case the warranty stops. BellSouth Products disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose, as of the date of 90 days from your original purchase of the telephone. BellSouth Products assumes no responsibility for any special, incidental, or consequential damages. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitations of special, incidental or consequential damages, or limitations on how long a warranty lasts, so the above exclusion and limitation may not apply to you. Warranty Service Not Provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, or the affixing of any attachment not provided by BellSouth Products with the telephone, and/or loss of parts. This warranty is voided in the event any unauthorized person opens, alters or repairs the telephone. All BellSouth equipment being returned for repair must be suitably packaged. Telephone companies use different types of equipment and offer various types of services to customers. BellSouth Products does not warrant that this telephone is compatible with the type of equipment of any particular telephone company or the services provided by it. 35 Warranty What To Do for Warranty Service During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. Please allow 2-3 weeks for the return of your telephone product. The shipping address of the authorized service center is:
U.S. Electronics Consumer Center C/O Southern Bonded Warehouse 7137 Southlake Parkway Morrow, GA 30260 NOTE: A telephone product received which was not made for BellSouth Products or which is not defective as determined by our test procedures will not be repaired and will be returned to you C.O.D., freight collect. To Obtain Warranty Service Provide proof of the date of purchase within the package. Prepay all shipping costs to the authorized service center. Include a return shipping address within the package. Please retain your sales receipt, the carton, the packing materials, and the printed material. The original carton is the best shipping container for the telephone should you have to return it. For your reference:
Serial Number Date of Purchase Name of Dealer Customer Service Telephone Number:
1-800-210-8950 OUTSIDE THE U.S.A. CALL 1-212-242-6978 36 Notes 37 Notes 38 Wall Mounting Template This page serves as a template for attachment of screws to the wall when mounting this telephone on the wall. 1. Cut out this page. 2. Use this template to determine the distance between screws when mounting this phone on the wall. The two cross hairs identify where to attach the screws. 39 IMPORTANT In order to get maximum life from the HANDSET BATTERY PACK, be sure to charge the HANDSET for 12 hours before initial use. IMPORTANT Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference. IMPORTANT When you hear interference, press the SCAN button to change the operating channel. IMPORTANT The AC ADAPTER must always be plugged into an electrical outlet. IMPORTANT If you live in an area which gets frequent thunderstorms, we strongly recommend plugging your AC ADAPTER into a surge protector. 40 2.4 GHz CORDLESS CALLER ID TELEPHONE WITH CALL WAITING 40 CHANNEL AUTOSCAN Model GH9457 OWNER S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS NEW CALL MSG WAITING 2 . 4 G H z MS G DI R CALL BATT L-D-C C-F BELLSOUTH 1 - 2 1 2 - 2 4 2 - 6 9 7 8 TOTAL 3 0 1 8 NEW 8 / 2 4 1 0: 00 AM PM DIR 2.4GHz FUN C/V.M. A BC 2 J KL 5 DELETE SCAN D EF 3 M NO 6 W XY 9 T UV 8 O PE R 0 1 0 DIAL PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. T AL K RE/PA SAVE 1 G HI 4 P RS 7 7 E D I T For installation information, please see Getting Started instructions on page 5 or your separate Quick Start Guide.
1+
F L A S H PAGE CHARGE IN USE C 2002 BellSouth Corporation 41 STOP Make certain you receive the best performance from your telephone. Read this manual first. Made in China CM Special Features Congratulations on your selection of a quality BellSouth product. With proper care, and by following the set-up and user instructions in this manual, this unit will provide you with years of trouble-free service. BellSouth is committed to providing quality products that fit your needs. We would like to have any comments or suggestions you might have on this product. You may mail your comments to:
U.S. Electronics 105 Madison Avenue New York, NY 10016 When examining your new BellSouth cordless telephone, you will find an array of special features including:
Filtered SoundTM System - Gets considerably less noise than conventional cordless telephones because of a special circuit which delivers the clearest possible reception. 40 Channel Auto Scan - Press the channel for any call. SCAN DELETE button on the HANDSET to find and lock on to the clearest Desk or Wall Mount - Use this equipment as a desk phone or as a wall phone. TONE or PULSE Dialing - Use this phone for either TONE or push-button PULSE (rotary) dialing. Automated Functions - Redial the last number called and automatic STANDBY mode. Security - Ensures greater privacy because a built-in security code with 65,536 combinations prevents use of your telephone line by another nearby cordless phone. Dependable Battery - Recharge your BATTERY PACK many times with the built-in charger. The battery low warning tone tells you when the BATTERY PACK needs recharging. (See page 29.) Special Services - Use the FLASH button to access special services such as Call Waiting supplied by your telephone company or company switchboard. STANDBY Mode - When in STANDBY mode (ON-HOOK), the phone is capable of receiving a call. When the HANDSET is on the BASE UNIT, it is automatically in the STANDBY mode (ON-
HOOK). When the HANDSET is taken off the BASE UNIT, it remains in the STANDBY mode until you activate the TALK button. Battery Power Saver - Once fully charged, in STANDBY mode, the HANDSET can receive/send calls for a maximum of five days without the need for recharging. Length of charge depends on frequency of use. Luminous LCD Screen - The LCD Screen emits light for 5 seconds every time you press any of the TELEPHONE KEYPAD buttons. HANDSET Ringer Level - Select the ringer volume level (HI, LOW, OFF). HANDSET VOLUME CONTROL Switch - Select the receiver volume level (HI, MID, LOW). Special Features HEADSET JACK - Your telephone can utilize a headset for hands-free communication. BELT CLIP - Use the BELT CLIP to hang your HANDSET on your belt. CALLER ID SYSTEM Multi-Function Large LCD Screen - Shows the number you are dialing, and with Caller ID service (available through subscription from your local telephone company), displays information about the caller before you answer the call. Name and Number DIRECTORY - Stores up to 40 names and numbers so that you can call them with a single key stroke. Caller List - Available with Caller ID service. Stores up to 80 calls to keep track of everyone who called. The name, phone number, time, and date of the call are recorded. Allows you to return their calls with a single key stroke. Preferred Calls - You can mark the name and number of a welcome caller in the DIRECTORY. When that number calls in, the callers name will appear on the DISPLAY and a special ring sound will be heard. Blocked Calls - You can mark the name and number of an unwelcome caller in the DIRECTORY. When that number calls in, the callers name will appear on the DISPLAY and the ringer will be disabled. Repeat Call Indicator - Shows if a new incoming call has called more than once. Out of Area Call Indicator - Advises you that the incoming call is not in a Caller ID service area, or does not support the Caller ID system. Private Call Indicator - Advises you that the callers name and/or telephone number of the incoming call is blocked by system. Call Waiting Service - Displays the name and number of the second caller, if you have subscribed for call waiting service from your local telephone company (See page 15). Voice Mail - Indicates message waiting signal if you subscribed to Voice Mail message service and requested Visual Message Indication from your local telephone company (see page 15). This telephone also detects a Stutter Dial Tone signal every time there is a Voice Mail message for your Voice Mail message provider if you have subscribed to Voice Mail message service. HANDSET Controls 1. HANDSET ANTENNA 2. NEW CALL/MESSAGE WAITING INDICATOR Pg. 14 3. LCD SCREEN 4. TALK BUTTON Pg. 6,7, 11~13, 15~16, 20, 21, 31 5. SCROLL UP-DOWN/
SHIFT LEFT-RIGHT BUTTON Pg. 14, 16~27 6. REDIAL/PAUSE/SAVE BUTTON Pg. 13, 16, 20, 23~26 7. VOLUME CONTROL
(HI, MID, LOW) SWITCH 8. 10 DIAL BUTTON Pg. 12, 16, 20, 21 9. 7 DIAL/TEMPORARY TONE(*) BUTTON Pg. 12, 16, 18, 20, 21 10. EDIT BUTTON Pg. 16, 18~20, 23~27 2.4GHz NEW CALL MSG WAITING L-D-C C-F CALL BATT MSG DIR BELLSOUTH 1-212-242-6978 10:00 8/24 18 30 TOTAL NEW AM PM TALK DIR RE/PA SAVE FUNC/V.M. DELETE SCAN 1 GHI 4 PRS 7 7 DEF 3 MNO 6 WXY 9
1+
ABC 2 5 JKL TUV 8 OPER 0 10 DIAL EDIT FLASH 11. DIR BUTTON Pg. 17~21, 27 12. SCAN/DEL(DELETE) BUTTON Pg. 16, 17, 19~21, 27, 28, 31, 39 13. FUNCTION/VOICE MAIL BUTTON Pg. 15, 22~26 14. HEADSET JACK Pg. 13 15. TELEPHONE KEYPAD Pg. 16, 18~20, 22~27 16. 1+DIAL/# BUTTON Pg. 12, 16, 20, 21 17. FLASH BUTTON Pg. 15 18. CHARGE CONTACTS HANDSET Control 1. HANDSET ANTENNA 2. NEW CALL/MSG (MESSAGE) WAITING LED Indicator: Blinks when recording a new incoming call or when receiving Message Waiting signal, if you have subscribed to a Voice Mail message service from your local telephone company. (See page 14 for details.) 3. LCD Screen: Shows call information, phone status, prompts and directory items. 4. TALK TALK Button: Press to answer an incoming call or to place a call. Press to end a call. HANDSET Controls 5. SCROLL UP-DOWN, SHIFT LEFT-RIGHT Button: Press to move around the Large LCD Screen. 6. SAVE/RE(REDIAL)/PA(PAUSE) Button: (SAVE) Press and hold down to save the changes on the listed items. (REDIAL) Press to redial the last number you dialed. (PAUSE) Press to insert a pause while dialing. (You will need the button to dial numbers which use an alternative long distance access code.) RE/PA SAVE RE/PA SAVE 7. HANDSET VOLUME CONTROL (hi, mid low) Switch: Select the receiver volume level (HI, MID, LOW). 8. DIAL 10/0 Code. 010 OPER Button: (DIAL 10) Press and hold down to place a local call with Area 9. DIAL 7/TEMPORARY TONE Button: (DIAL 7) Press and hold down to place a local call. (*) Press to temporarily change the dialing mode from Pulse to Tone for rotary service users. (Press once before entering numbers to access the answering system or electronic banking service, etc.) 7 10. EDIT EDIT Button: Press to edit listed items. 11. DIR (DIRECTORY) DIR Button: Press to access names and numbers stored in the DIRECTORY. (See page 16 to 21 for details.) 12. SCAN/DEL SCAN DELETE (DELETE) Button: (SCAN) Press to change the operating channel when you hear interference. (DELETE) Press and hold down to delete items or individual characters. FUNC V.M. 13. FUNC (FUNCTION)/V.M. (VOICE MAIL) Button: Press to access special functions operation in STANDBY mode. (For special functions see page 22.)
(VOICE MAIL) - Press to automatically dial the Voice Mail Post Code in your area to access your Voice Mail message. 14. HEADSET JACK: For connecting your headset plug to enjoy hands-free communication.
(See page 13 for detail.) 15. TELEPHONE KEYPAD: Allows you to make a call depending on pressed button. (For TELEPHONE KEYPAD characters, see page 27.) 16. DIAL 1+/#
Button: (DIAL 1+) Press and hold down to place a long distance call.
(Automatically adds the number 1 at the beginning of the displayed telephone number.)
#1+
17. FLASH FLASH Button: Press to answer a call if you have Call Waiting. 18. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We recommend cleaning the CHARGE CONTACTS periodically with a damp cloth. BASE UNIT Controls 1. TONE/PULSE SELECT SWITCH Pg. 5, 9, 31 2. POWER-IN CONNECTION JACK Pg. 5 3. TELEPHONE LINE CONNECTION JACK Pg. 5, 9, 31 4. ANTENNA 2.4GHz 5. HANGER KNOB Pg. 10 PAGE CHARGE IN USE 6. CHARGE TERMINALS 7. PAGE BUTTON 8. IN USE/CHARGE LED INDICATOR Pg.11, 12 BASE UNIT Controls 1. TONE/PULSE Select Switch 2. POWER-IN CONNECTION JACK 3. TELEPHONE LINE CONNECTION JACK 4. ANTENNA 5. HANGER KNOB: Use to secure to the HANDSET in position when WALL mounting. 6. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best performance, clean the CHARGE TERMINALS periodically with a damp cloth. 7. PAGE PAGE Button: Press to page the HANDSET. 8. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET is in TALK mode. (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for charging. IMPORTANT Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2002-04-22 | 2400 ~ 2483.5 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2002-04-22
|
||||
1 | Applicant's complete, legal business name |
CIDMATE International Technology Inc.
|
||||
1 | FCC Registration Number (FRN) |
0005949870
|
||||
1 | Physical Address |
3F-B, No. 58, Sec. 1
|
||||
1 |
Taipei, N/A 104
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
PIZ
|
||||
1 | Equipment Product Code |
GH94578
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B******** L******
|
||||
1 | Title |
Sales Asst. Manager
|
||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
c******@m5.is.net.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2.4G Analoge Cordless Telephone | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SPORTON International Inc
|
||||
1 | Name |
K**** L****
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
k******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2400.00000000 | 2483.50000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC