all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 650.24 KiB | April 16 2020 / October 13 2020 | delayed release | ||
1 |
|
Internal Photos | Internal Photos | 469.93 KiB | April 16 2020 / October 13 2020 | delayed release | ||
1 |
|
External Photos | External Photos | 432.76 KiB | April 16 2020 / October 13 2020 | delayed release | ||
1 |
|
ID Label | ID Label/Location Info | 303.32 KiB | April 16 2020 | |||
1 |
|
Agent Authorization Letter | Cover Letter(s) | 118.21 KiB | April 16 2020 | |||
1 |
|
Antenna Info | Operational Description | 301.85 KiB | April 16 2020 | |||
1 |
|
Cover Letter | Cover Letter(s) | 338.11 KiB | April 16 2020 | |||
1 | Frequency Block Diagram | Block Diagram | April 16 2020 | confidential | ||||
1 | Operational Description | Operational Description | April 16 2020 | confidential | ||||
1 |
|
Request for Confidentiality | Cover Letter(s) | 237.97 KiB | April 16 2020 | |||
1 | Schematics | Schematics | April 16 2020 | confidential | ||||
1 |
|
Test Report | Test Report | 1.56 MiB | April 16 2020 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 1.53 MiB | April 16 2020 / October 13 2020 | delayed release |
1 | User Manual | Users Manual | 650.24 KiB | April 16 2020 / October 13 2020 | delayed release |
CLR-C1-CO Battery Powered Carbon Monoxide Alarm Detector Carbon Monoxide Alarm Read carefully and retain for as long as the product is being used. It contains vital information on the operation and installation of your Alarm. This booklet should be regarded as part of the product. If you are just installing the Alarm, this booklet must be given to the householder. This booklet is to be given to any subsequent user. Instructions 1. Table of Contents 1. Read This First ................................................................... 2. Carbon Monoxide The Silent Killer .................................. 3. Where to Place CO Alarms ................................................ 4. Installation ............................................................................ 5. Testing / Monitoring & Maintenance .................................... 6. What to do When the Alarm Sounds.................................... 7. How to Protect your Family ................................................. 8. Technical Specification ........................................................ 9. Getting the CO Alarm Serviced ........................................... 10. Limitations of CO Alarms .................................................... 11. Troubleshooting .................................................................. 12. Display & Indicator Summary ............................................. page 3 4 9 15 17 21 22 24 25 25 27 29 2. 1. Read This First Congratulations on becoming the owner of an Clare Controls Carbon Monoxide Alarm. This will help protect you and your household from the dangerous effects of Carbon Monoxide- the silent killer. Remove the battery pulltab to engage the batteries. The Carbon Monoxide Alarm (CO Alarm) is powered up by carefully rotating it onto the mounting plate which activates the on/off switch. The red, amber & green lights will immediately flash in sequence to show they are working. (For the Display models, the LCD screen will display all icons). Then wait 15 seconds after connecting the power before button testing. Install a CO Alarm in every room that contains a fuel burning appliance, particularly high occupancy areas e.g. bedrooms, kitchens etc. In rooms with a fuel burning appliance, install (preferably) on the ceiling, (1ft (300mm) from walls) and between 5ft to 10ft horizontally from appliance. In rooms remote from the appliance install at head height, where the Alarm indicators can be seen. Test the Alarm weekly by pressing the test/hush button, the Alarm will sound (at a diminished sound output level initially and then quickly reach maximum sound output level). Replace Alarm after approx. 10 years operation (see Replace by date on side wall label). Do not fit Alarm until all construction is completed to avoid contamination. Individuals with health issues may consider warning devices which provide audible and visual signals for carbon monoxide concentrations under 30ppm. 3. 2.1 What is Carbon Monoxide?
2. Carbon Monoxide The Silent Killer Many people are killed each year, and many more suffer ill health from Carbon Monoxide (CO) poisoning. CO is an invisible, odorless, tasteless and extremely toxic gas. It is produced by appliances and vehicles burning fuels, such as coal, oil, natural gas, propane, kerosene, paraffin, wood, gasoline, diesel, charcoal etc. CO is absorbed by red blood cells in the lungs in preference to oxygen - this results in rapid damage to the heart and brain from oxygen starvation. High levels of CO in a house can be caused by:
Incorrectly or poorly installed fuel-burning appliances. Blocked or cracked chimneys/flues. Blocked vents or draught-proofing which makes areas with fuel burning appliances or fireplaces airtight. Engines of cars, lawnmowers etc. that are left running in confined spaces. Portable kerosene or propane heaters in poorly ventilated rooms. 2.2 What happens when your CO Alarm detects Carbon Monoxide?
When the Alarm detects potentially dangerous levels of CO, it flashes the red alarm LED immediately and then sounds a loud alarm if the CO persists. Table B below shows how the CO Alarm reacts to different levels of CO gas and exposure time. At higher levels of CO the alarm sounds sooner. The rate of flashing of the red LED indicates the level of CO. If your CO Alarm sounds follow the instructions on page. NEVER IGNORE THE ALARM !
4. 2.3 Symptoms of Carbon Monoxide Poisoning Table A Concentration of CO in Air ppm Inhalation Time (approx.) and Symptoms Developed 35 150 200 400 800 1,600 3,200 The maximum allowable concentration for continuous exposure in any 8 hour period according to OSHA *. Slight headache after 1.5 hours. Slight headache, fatigue, dizziness, nausea after 2-3 hours. Frontal headaches within 1-2 hours, life threatening after 3 hours, also maximum parts per million in flue gas (on free air basis) according to US Environmental Protection Agency. Dizziness, nausea and convulsions within 45 minutes. Unconsciousness within 2 hours. Death within 2-3 hours. Headache, dizziness and nausea within 20 minutes. Death within 1 hour. Headache, dizziness and nausea within 5-10 minutes. Death within 25-30 minutes. Headache, dizziness and nausea within 1-2 minutes. Death within 10-15 minutes. Death within 1-3 minutes. 6,400 12,800 The following symptoms may be related to CARBON MONOXIDE POISONING and should be discussed with ALL members of the household:
Mild exposure: Headaches, running nose, sore eyes, often described as flu-like symptoms;
Medium exposure: Dizziness, drowsiness, vomiting;
Extreme Exposure: Unconsciousness, brain damage, death. Many cases of reported CARBON MONOXIDE POISONING indicate that while victims are aware they are not well, they become so disoriented they are unable to save themselves by either exiting the building or calling for assistance. ppm = parts per million *OSHA Occupational Safety & Health Association 5. Red Light Display Icon
(before horn sounds) Display Icon
(after horn sounds) Horn /
Sounder CO Gas Level Approx. 30 ppm Off*
Blank Blank Off Table B: CO Alarm Response Approx. 70 ppm Approx. 150 ppm 1 flash every 3 secs 1 flash every 2 secs Approx. 400 ppm 1 flash every 1 secs Approx. 750 ppm 1 flash every 1 secs on within 60-240 mins
(typ 90 mins) on within 10-50 mins
(typ 30 mins) on within 4-15 mins
(typ 9 mins) on within 3 mins
(typ 2 mins)
* Unless it has alarmed previously (see CO Alarm Memory below) ppm values shown in table are for example purposes only 6. CO present (before Alarm sounds): When the Alarm detects CO the red LED flashes in accordance with Table B. This helps locate CO leaks as the unit gives an immediate indication.
(Without this feature the CO would need to be present for typically 90 minutes for an alarm sound to be given). Note the red LED flashes may be triggered by CO produced by gas appliances, from car engines or from nearby barbecues. This is usually not a concern, unless the red LED flashes persist until the alarm sounds and the CO source is unknown. The display models will display CO concentrations greater than 30ppm in accordance with Table B. NOTE: The CO Alarm may sound if cigarette smoke is blown into it, or aerosols are released nearby. CO ALARM MEMORY The CO Alarm memory is an important feature of the CO Alarm where, even if the house is unoccupied during an alarm condition, it warns the homeowner that the unit has previously detected CO gas and been in alarm. The memory feature has two operation modes:
- memory indication for 24 hour period after alarm.
- memory recall on demand 24 hour memory indicators: After alarm, the RED LED will flash at different rates every 50 seconds depending on the level of CO detected - see Table C. Memory recall on demand: To review the memory status after initial 24 hours, press and hold the test button, the red LED will flash in accordance to Table C. Display models will show the peak level of CO measured. 7. Table C: CO Alarm Memory Indicators CO Gas Level Red Light Response 24 Hours On Demand (Button Press) approx. 70 ppm 1 flashes every 50 sec approx. 150 ppm 2 flashes every 50 sec approx. 400 ppm 4 flashes every 50 sec approx. 750 ppm 4 flashes every 50 sec 1 flashes 2 flashes 4 flashes 4 flashes Reset Memory: Hold down the test button until the red LED stops and the green LED starts flashing. Cover the Alarm with a cloth to muffle the sounder during this time. Please note that the memory will also be reset when the unit is switched off. 3. Where to Place CO Alarms NATIONAL FIRE PROTECTION ASSOCIATION REQUIRED PROTECTION For your information the National Fire Protection Associations Standard 720 advises as follows:
Carbon Monoxide Alarms shall be installed as follows:
(1) Outside of each separate dwelling unit sleeping area in the immediate vicinity of the bedroom.
(2) On every occupiable level of a dwelling unit, including basements but excluding attics and crawl spaces.
(3) Other locations where required by applicable laws, codes or standards. The equipment should be installed using wiring methods in accordance with the National Fire Protection Associations Standard 72, 720. (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269) 9. IMPORTANT!
Specific requirements for Carbon Monoxide Alarm installation vary from state to state and from region to region. Check with your local Fire Department for current requirements in your area. 3.1 Ideally a Carbon Monoxide Alarm should be installed in:
- Every room containing a fuel burning appliance, and
- Remote rooms where occupants spend a considerable amount of time
- Every bedroom. However if the number of Carbon Monoxide Alarms to be fitted is limited, the following points should be considered when deciding where best to fit the Alarm(s)
- If there is an appliance in a room where people sleep, place a CO Alarm in this room
- Locate a CO Alarm in a room containing a flueless or open-flued appliance
- Locate an Alarm in a room where the occupant(s) spend most of their time (e.g. family room)
- In a studio apartment, the CO Alarm should be placed as far away from the cooking appliance as possible, but near to where the person sleeps
- If the appliance is in a room not normally used, such as a furnace room, the CO Alarm should be placed immediately outside the room so that the alarm will be heard more easily. 10. 1ft (300mm) CO Alarm 0.5ft (150mm) Location in room with a fuel burning appliance Figure 1 11. Figure 2 Location in rooms with sloped ceilings, the CO Alarm should be located at the high side of the room Figure 3 Location in bedrooms & other rooms remote from the appliance
(i.e. at breathing level) CO Alarm 12. 3.2 Unsuitable Locations Do not place the CO Alarm in any of the following areas.
(1) In the immediate vicinity of a cooking appliance (keep it at least 3ft (1 meter) horizontally from it).
(2) Outside the building.
(3) In an enclosed space (e.g. in or below a cupboard).
(4) In a damp or humid area.
(5) Directly above a sink, stovetop or oven.
(6) Next to a door, window, air vent or anywhere that it could be affected by draughts.
(7) Next to a ceiling or exhaust fan or air conditioning vents.
(8) Over heat sources such as radiators or heating vents.
(9) Where it would be obstructed, e.g. by curtains or furniture.
(10) In an area where the temperature could drop below 40F (4.4C) or rise above 100F (37.8C).
(11) Where dirt or dust could block the sensor.
(12) Where it could be easily knocked or damaged, or where it could be accidentally turned off or removed.
(13) In a bathroom or other areas where the CO Alarm may be exposed to water splashes, dripping or condensation
(14) Near paint, thinners, solvent fumes or air fresheners. 13. 3.31 If locating the CO Alarm in a room with a fuel burning appliance
(see figure 1) If it is mounted on a wall, it should be located at a height greater than the height of any door or window but still be at least 0.5ft (150mm) from the ceiling. If it is mounted on the ceiling it should be at least 1ft (300mm) from any wall or light fixture. The CO Alarm should be a horizontal distance of between 5ft to 10ft (1.5m and 3m) from the potential CO source. If there is a partition in the room, the CO Alarm should be located on the same side of the partition as the potential source of carbon monoxide. In rooms with sloped ceilings and fuel burning appliances, the CO Alarm should be located at the high side of the room (see fig 2). 3.32 If locating the CO Alarm in a bedroom or in rooms remote from a fuel burning appliance (see figure 3) Mount the CO Alarm relatively close to the breathing zone of the occupants. Whatever position is chosen make sure it is possible to view the three LED indicators, when in the vicinity of the Alarm. WARNING: A CO Alarm should not be used as a substitute for proper installation, use and maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems. WARNING: Your CO Alarm is intended for use in ordinary indoor locations of family units. It is not designed to measure compliance with OSHA commercial or industrial standards. 14. Warning: The Installation of this apparatus should not be used as a substitute for proper installation, use and maintenance of fuel burning appliances including appropriate ventilation and exhaust systems. 4. Installation 4.1 Installation Procedure 1. Select a location complying with the advice in Section 3. 2. Remove the mounting plate from the packaging/
Alarm. 3. Place the mounting plate on the ceiling/wall exactly where you want to mount the Alarm. With a pencil, mark the location of the two screw holes. 4. Taking care to avoid any electrical wiring in the ceiling, drill holes using a 13/64 (5.0mm) drill bit through the center of the marked locations. Push the plastic screw anchors provided into the drilled holes. Screw the mounting plate to the ceiling/
wall. 5. Alternatively, if desired, the CO Alarm will also free stand on a flat surface with the mounting plate attached. Figure 4 6. If using the RF feature, ensure the RF module is fitted correctly into the base of the Alarm. For further advice on the RF installation, see the corresponding booklet for the RF Module. 15. 7. Carefully align the Alarm with the base, gently press home & twist on see Figure 4. (This connects the batteries). The red, amber & green LEDs will immediately flash in sequence to show the Alarm is powered correctly. In addition, the icons on the LCD display on the Display models will also become visible. 8. Press the Test button (after 15 seconds) to ensure that the Alarm is functioning correctly (see Figure 5). 9. Install all the other Alarms similarly. 4.2 How to Tamperproof the Alarm Figure 5 The Alarm can be made resistant to unauthorized removal. Break off the small pillar on the base as shown in Figure 6a. To remove the Alarm once installed, it is now necessary to use a small screwdriver, to release the catch (push catch towards the ceiling) and then twist off the Alarm (see Figure 6b). If necessary it is possible to further secure or tamperproof the Alarm by using a No.2 or No.4 3/32 to 7/64 (2 to 3mm) diameter - not supplied self-tapping screw 1/4 to 5/16
(6 to 8mm) long to firmly lock the Alarm and its mounting plate together (see Figure 7). 16. Figure 6a Figure 6b Figure 7 Testing 5. Testing / Monitoring & Maintenance Frequent testing of the system is a requirement to ensure its continued and safe operation. To test the Alarm press the hold the test button. The Green LED will flash and the horn will ramp up to full sound to indicate the Alarm is operating correctly. Guidelines and best practices for testing are as follows 1. Immediately after the system is installed or upgraded 2. Once weekly thereafter 3. After prolonged absence from the dwelling (e.g. after extended vacation) 4. After any significant home repairs or remodeling work. 17. Silencing (Hush) When the Alarm sounds, after sensing CO, pressing the test/hush button will immediately silence the Alarm (the red light will continue to flash). If CO is still present the red LED and sounder will activate again after about 4 minutes. The Alarm can only be silenced once during a CO incident. At levels > 250ppm CO the Alarm cannot be silenced. Monitoring The CO Alarm will self-check (monitor) itself and give a status update every 50 seconds if there are any problems. The status of the Alarm can also be checked on demand by using the test button. The table below shows the status response to both the self-check and on demand testing. If the Alarms are indicating a fault, pressing the test button will silence the beeps for a 24 hour period. This is for your convenience and can only be done once. Status Result Red LED
(Alarm)
(Fault)
(Power) Amber LED Green LED Sounder LCD Display Action Monitoring Summary Standby No visual or audible indication if unit is OK Unit OK ( Button Test) Off Off Ramps up to full sound Low Battery Sensor Fault End of Life (EOL) Off Off Off 1 Flash 2 Flashes 3 Flashes 1 Beep 2 Beeps 3 Beeps Replace batteries Replace Unit Replace Unit On Off Off Off 18. Maintenance Clean the outside housing by occasionally wiping with a clean damp cloth. Do not use any cleaning agents, bleaches, detergents or polishes, including those in aerosol cans. Avoid spraying air fresheners, hair spray, paint or other aerosols near the CO Alarm. Do not place air fresheners near the unit. Use the narrow nozzle of a vacuum cleaner to remove fluff and other contamination from the cover slots and gas entry holes. Caution: Do not paint the CO Alarm. Remove the CO Alarm when decorating. Do not allow water or dust to contaminate the Alarm. Warning: Do not open or tamper with the CO Alarm. There are no user serviceable parts inside and this can damage the Alarm. Battery Replacement If the alarm indicates a yellow flash with a single beep or the low battery icon is displayed on display alarms remove the Alarm from the mounting plate, remove the battery cover (see figure 8) and replace the batteries. Use only Duracell Alkaline MN2400BK AAA size batteries (from a local retailer). Insert the new batteries with the orientation shown on the base. Replace the battery cover and carefully line up the Alarm on the base, gently press home &
twist on. This connects the batteries. The red, amber
& green lights will immediately flash in sequence to show the batteries are connected properly. In addition, the icons on the LCD display on the Display models will also light up. After 15 seconds press the Test button to ensure that the Alarm works. Figure 8 19. If the alarm still indicates a yellow flash with a single beep or the low battery icon is displayed on display alarms the batteries may be depleted. Replace with fresh batteries. If the red, amber & green lights do not flash in sequence and there is no display on the LCD display units the batteries may be installed incorrectly
(reverse polarity). Remove the Alarm from the mounting bracket, remove the battery cover and check if the batteries are installed correctly. If the batteries were connected incorrectly and after correcting the polarity of the batteries, for the first hour the Alarm may indicate CO is present by a flashing red LED for non-display Alarms; for display models the Alarm may indicate CO level readings and/or random icons. Please note that during this period the Alarm will still activate as required during an actual CO event. Warning! - Constant exposures to high or low temperatures or high humidity may reduce battery life. Use only batteries specified in marking. Use of a different battery may have a detrimental effect on alarm operation. For environmentally sound disposal, remove the Alarm from its mounting plate models, open the battery door and remove the batteries) and dispose in accordance with best practice and guidance on WEEE disposal and recycling. Functional Gas Test The Carbon Monoxide Alarm checks for CO gas every 4 seconds and when exposed to the CO gas, the red light will flash (as per Table B) to confirm that it is detecting the CO gas. Solo C6 brand canned CO testing agent may be used to verify the 20. Alarms ability to sense CO. To gas test the Alarm, for 3 seconds spray the canned CO within 1/4 of the gas entry holes (see Figure 9). Within seconds, the red light will begin to flash (as per Table B) to confirm that the Alarm has detected the CO. To enter the accelerated functional gas test mode, press the Test button momentarily (approx. 1 second) while the Alarm is indicating CO presence. The Alarm will sound 2 x 4 temporal tone patterns to indicate an Alarm condition. To return the unit to standby, simply leave the Alarm in clean air for a few minutes until the red light is no longer flashing. Gas Entry Holes Figure 9 6. What to do when the alarm sounds Warning! Actuation of your CO Alarm indicates the presence of carbon monoxide (CO) which can KILL YOU. If an alarm signal sounds:
1) Operate reset/ Silence button (only operational at concentrations <250ppm) 2) Call your local Fire Department or 911 3) Immediately move to fresh air outdoors or by an open door/ window. Do a head count to ensure that all persons are accounted for. DO NOT re-enter the premises until the first responders have arrived, the premises have been aired out and your Alarm returns to its normal condition. 21. 4) After following steps 1-3, if your Alarm reactivates within a 24 hour period, repeat steps 1-3 and call a qualified appliance technician to investigate for sources of CO from fuel burning equipment and appliances, and inspect for proper operation of this equipment. If problems are identified during this inspection have the equipment serviced immediately. Note any combustion equipment not inspected by the technician and consult the manufactures instructions, or contact the manufacturers directly, for more information about CO safety and this equipment. Make sure that motor vehicles are not, and have not been, operating in an attached garage or adjacent to the residence. Note: When ventilation is provided by leaving the window and doors open, the CO build up may have dissipated by the time help arrives and the Alarm may have stopped sounding. Although your problem may appear temporarily solved it is crucial that the source of the CO is determined and appropriate repairs made. 7. How to Protect your Family Follow these guidelines to reduce the risk of Carbon Monoxide poisoning.
(1) Know and look out for warning signs that Carbon Monoxide may be present. These include:
- The CO Alarm warning of abnormal levels.
- Staining, soot marks or discoloration on or around appliances.
- A pilot light frequently going out.
- A strange smell when an appliance is operating.
- A gas flame which is yellow or orange, instead of the normal blue.
- Family members (including pets) exhibiting the flu-like symptoms of CO 22. poisoning as described above. If any of these signs are present get the appliance serviced before further use. If feeling ill, get immediate medical help.
(2) Choose all appliances and vehicles which burn fossil fuels such as coal, oil, natural gas, propane, kerosene, wood, gasoline, diesel, charcoal etc. with care and have them professionally installed and regularly maintained.
(3) These appliances must breathe in air to burn the fuel properly. Know where the air comes from and ensure vents remain unobstructed (particularly after any construction or remodeling work).
(4) The appliances must also breathe out waste gases (including the CO) usually through a flue or chimney. Ensure chimneys and flues are not blocked or leaking, and get them checked every year. Check for excessive rust or cracks on appliances and pipe work.
(5) Never leave your car, motor bike or lawnmower engine running in the garage with the garage door closed. Never leave the door from the house to the garage open if the car is running.
(6) Never adjust your own gas pilot lights.
(7) Never use a gas stove, cooktop or a barbecue grill for home heating.
(8) Children should be warned of the dangers of CO poisoning and instructed never to touch, or interfere with CO Alarms. Do not allow small children to press the test/
hush button as they could be subjected to excessive noise when the Alarm sounds.
(9) Leaving windows or doors slightly open (even a few inches) will significantly reduce the risk of high levels of CO occurring. The high levels of draught-proofing in modern houses reduces ventilation and can allow dangerous gases to build up. 23.
(10) Install CO Alarms in all the areas recommended in this booklet.
(11) Recognize that CO poisoning may be the cause when family members suffer from flu-like symptoms when at home but feel better when they are away for extended periods. 8. Technical Specification Power: Two Alkaline AAA type batteries (replaceable) CO Sensitivity: Meets UL2034 Electromagnetic Compatibility: Complies with UL2034 / FCC Part 15 Test/Hush Button: Checks electronics, sounder, sensor and batteries Operating Temperature: 40F (4.4C) to 100F (37.8C) Humidity Range: 15% to 95% R.H. (non-condensing) Audible Alarm: 85dB(A) at 10ft (3m) minimum LCD Display: Displays CO level above 30ppm (in steps of 5ppm) RF Functionality: RF Module required (see Model Chart on page 2) CO Alarm Memory: Indicates if unit was previously in alarm Dimensions: 4.7 x 4.1 x 1.6 (120mm x 105mm x 40mm) Weight (grams): 6.53 ounces (185g) 24. 9. Getting the CO Alarm Serviced If your CO Alarm fails to work after you have carefully read all the instructions, verified that the unit has been installed correctly, and ensured that it has good batteries connected, return it for repair or replacement. This should be where it was purchased. Some states or jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitations on how long an implied warranty last so the above limitation may not apply to you. Do not interfere with the Alarm or attempt to tamper with it. This will invalidate the guarantee, but more importantly may expose the user to shock or fire hazards. This guarantee is in addition to your statutory rights as a consumer. 11. Limitations of CO Alarms
(1) The CO Alarm will not work without good batteries or if the batteries are placed in reverse polarity. If the batteries have been drained the Alarm will not give protection. Button test the Alarm weekly and on return from vacations or other long absences.
(2) Carbon Monoxide must enter the unit for it to be detected. There may be Carbon Monoxide in other areas of the house (e.g. downstairs, in a closed room etc) but not in the vicinity of the CO Alarm. Doors, air drafts and obstructions can prevent CO from reaching the Alarm. For these reasons we recommend CO Alarms are installed both near and in bedrooms, particularly if bedroom doors are closed at night. Additionally install in rooms where members of the household spend much of their time, and in rooms with potential sources of CO gas. 25.
(3) The CO Alarm may not be heard. The sound output is loud but it may not be heard behind a closed door or if it is too far away. The Alarm may not wake up somebody who is impaired by alcohol or medications. The alarm sound may be masked by other sounds such as T.V., stereo, traffic noise etc. Installing CO Alarms on either side of closed doors will improve their chance of being heard. This CO Alarm is not designed for people with impaired hearing.
(4) CO Alarms dont last indefinitely. CO Alarms are sophisticated electronic devices with many parts. Although CO Alarms and their component parts have undergone stringent testing, and are designed to be very reliable, it is possible that parts can fail. Therefore, you should test your CO Alarms weekly. CO Alarms must be replaced after 10 years of operation.
(5) CO Alarms are not a substitute for life insurance. House-holders are responsible for their own insurance. CO Alarms warn of increasing CO levels, but we do not guarantee that this will protect everyone from CO poisoning.
(6) CO Alarms are not suitable as early warning Smoke Alarms. Some fires produce Carbon Monoxide, but the response characteristics of these CO Alarms are such that they would not give sufficient warning of fire. Smoke Alarms must be fitted to give early warning of fire.
(7) CO Alarms do not detect the presence of natural gas (methane), propane, butane or other combustible gases. Install combustible Gas Alarms to detect such gases. Note: Carbon Monoxide Alarms, with electrochemical sensors have a cross sensitivity to hydrogen. This means that they can alarm due to sensing hydrogen produced by batteries which are incorrectly charged, such as on boats or with battery back-up systems such as those used with alternative energy systems. The unit will alarm with 500 ppm H2 after between 10 and 40 minutes exposure. This CO Alarm is intended for residential use. It is not intended for the use in 26. industrial applications where Occupational Safety and Health Administration (OSHA) requirements for carbon monoxide detectors must be met. This carbon monoxide alarming device is designed to detect carbon monoxide gas from ANY source of combustion. It is NOT designed to detect smoke, fire, or any other gases. WARNING: THIS CO ALARM IS DESIGNED TO PROTECT INDIVIDUALS FROM THE ACUTE EFFECTS OF CARBON MONOXIDE EXPOSURE. IT WILL NOT FULLY SAFEGUARD INDIVIDUALS WITH SPECIFIC MEDICAL CONDITIONS. IF IN DOUBT CONSULT A MEDICAL PRACTITIONER. 12. Troubleshooting ALARM DOES NOT WORK WITH THE TEST BUTTON:
(1) Wait 15 seconds after connecting the power before button testing.
(2) Hold button down firmly for at least 5 seconds.
(3) Check the Alarm is secured correctly on the mounting plate.
(4) Check if batteries are inserted in the correct polarity.
(5) Replace batteries. ALARM SOUNDS FOR NO APPARENT REASON:
Follow the detailed instructions in Section 6 Entitled What to do when the alarm sounds (page 21). If there are still problems:
(1) Ensure there are no fuel burning appliances in the vicinity which could be leaking CO gas (e.g. even from next door).
(2) Ensure there are no fumes in the area (e.g. paint, thinners, hair spray, chemical 27. cleaners aerosol sprays, damp proofing done with and aqueous emulsion such as Amino functional siloxane and Alkylalkoxysilane.
(3) Ensure there is no outdoor source of CO in the vicinity (e.g. a car with engine running, heavy traffic, heavy air pollution, barbecue fumes etc).
(4) Ensure there is no source of hydrogen such as batteries being charged (e.g. on boats or in Uninterruptable Power Supplies (UPS)).
(5) Ensure there is not excessive smoke or fumes from devices such as Egyptian shisha, or hookah pipes, especially those that use coal or charcoal to heat the tobacco.
(6) If the Alarm is installed with an RF Module, ensure that there are no problems with the other RF interconnected devices.
(7) Press the test/hush button to silence the alarm. If the unit continues to sound it is possibly defective and should be replaced (see section 9 Getting the CO Alarm Serviced). 28. 13. Display & Indicator Summary 060 29. CLR-C1-CO Indicator Summary Normal Operation Red LED Amber LED Green LED Sounder Unit Sensing CO gas itself Flashing (as per table B) Off SensingCO through RF interconnect Off Power Up Standby Button Test (Weekly) Fault Mode Low Battery Condition Sensor Fault Condition End of Life Condition 1 flash Off Off Off Off Off 1 flash Off Off Off 1 flash Off Off Off Flashing (every sec) Temporal full sound Off Off Temporal full sound Temporal full sound 1 flash (every 50 secs) Off 1 beep with flash 2 flashes (every 50 secs) Off 3 flashes (every 50 secs) Off 2 beeps with flash 3 beeps with flash Service Diagnostics Diagnostics Modes Action Fault Checks Red LED Yellow LED Sounder Action Low battery Press & hold button Off Faulty Sensor Press & hold button Off End of Life (EOL) Press & hold button Off 1 flash 2 flashes 3 flashes 1 beep with flash Replace Batteries 2 beeps with flashes Replace Alarm 3 beeps with flashes Replace Alarm Alarm Memory Action Red LED Green LED Sounder LCD Display 24 hours after event Flashes as per Table C Off Off Off Long term memory Press & hold button Flashes as per Table C Off Temporal full sound CO ppm Memory Erase Keep button pressed after long term test Flashes as per Table C Wait for Green light then release button Temporal full sound CO ppm 30. FCC / IC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Per FCC 15.19 (a) (3) and (a) (4), This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Per FCC 15.21, The user manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this 31. device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS
(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interfrences et (2) cet appareil doit accepter toute interfrence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. In accordance with FCC requirements of human exposure to radio frequency fields, the radiating element shall be installed such that a minimum separation distance of 20 cm is maintained from the general population. FCC: 2ABBZ-RF-UTCO-433 IC: 11817A-RFUTCO433 This Class B digital apparatus complies with Canadian ICES-3B. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. MANUFACTURER HEREBY DISCLAIMS ALL WARRANTIES AND REPRESENTATIONS, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE INCLUDING (BUT NOT LIMITED TO) ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THESE PRODUCTS AND ANY RELATED SOFTWARE. MANUFACTURER FURTHER DISCLAIMS ANY OTHER IMPLIED WARRANTY UNDER THE UNIFORM COMPUTER INFORMATION TRANSACTIONS ACT OR SIMILAR LAW AS ENACTED BY ANY STATE.
(USA only) SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS 32. WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM STATE TO STATE. MANUFACTURER MAKES NO REPRESENTATION, WARRANTY, COVENANT OR PROMISE THAT ITS ALARM PRODUCTS AND/OR RELATED SOFTWARE (I) WILL NOT BE HACKED, COMPROMISED AND/OR CIRCUMVENTED; (II) WILL PREVENT, OR PROVIDE ADEQUATE WARNING OR PROTECTION FROM, BREAK-INS, BURGLARY, ROBBERY, FIRE; OR (III) WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS. Conforms to UL Std.2034 Certified to CSA Std. 6.19-01 CLR-C1-CO IM V2 03202020 33. 1.
1 | Internal Photos | Internal Photos | 469.93 KiB | April 16 2020 / October 13 2020 | delayed release |
1 | External Photos | External Photos | 432.76 KiB | April 16 2020 / October 13 2020 | delayed release |
1 | ID Label | ID Label/Location Info | 303.32 KiB | April 16 2020 |
Model: RF-UT-Ei-CO-433-CLR Cinch Systems Inc. FCC ID: 2ABBZ-RF-UTCO-433 Model: RF-UT-Ei-CO-433-CLR IC : 11817A- RFUTCO433 Model: CLR-C1-CO Clare Control Inc. FCC ID: 2ABBZ- RF-UTCO-433 Model: CLR-C1-CO IC : 11817A- RFUTCO433
1 | Agent Authorization Letter | Cover Letter(s) | 118.21 KiB | April 16 2020 |
Cinch Security Systems, Inc. 12075 43" St NE Suite 300 St Michael MN 55376 USA Agent Authorization Letter 9MARCH2020 To whom it may concern
|, Joel Christianson, the undersigned, hereby authorize Jim Schweitzer to act on our behalf, as our agent, in the following matters related to the FCC and/or Industry Canada approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Jim Schweitzer within the scope of this authorization shall have the same affect as our own. This authorization shall expire 01/01/2022 Job Title: CEO/president
1 | Antenna Info | Operational Description | 301.85 KiB | April 16 2020 |
RF-UTCO-433 Antenna info Overview:
Antenna description:
Antenna Drawing:
The antenna is a piece of wire and used in a monopole arrangement. Antenna is permanently attached to the unit. The antenna does not use reverse polarity connector. Antenna design:
Antenna specification Frequency band 433.95MHz Frequency (MHz) Return loss (dB) Peak gain (dBi) Average gain (dBi) Efficiency (%) 430 431 434 436 433
< -15
-0.93
-2.95 48.8 0.412
-1.34 33.8 0.22
-3.6 37.86 1.67
-1.9 68.3 3.08
-1.97 68.83
1 | Cover Letter | Cover Letter(s) | 338.11 KiB | April 16 2020 |
Cinch Systems, Inc. 12075 43rd St NE Suite 300 St. Michael MN 55376 USA Application Cover Letter FCC ID: 2ABBZ- RF-UTCO-433 Cinch Security Systems is applying for original certification to FCC Part 15 Subpart C 15.231 for FCC ID number 2ABBZ- RF-UTCO-433 carbon monoxide (CO) alarm sensor. The wireless communication interface with a security panel is regarded as a proprietary security protocol. The following model numbers are associated with this application:
RF-UT-Ei-CO-433-CLR CLR-C1-CO The radio in all models are electrically identical. The differences in the models are the company model naming format. Cinch model Number Clare model number Remark Electrically equivalent devices RF-UT-Ei-CO-433-CLR CLR-C1-CO Electrically all the units are identical. Company Officer:
Telephone Number:
Email:
Vice President 763-497-1059 jim.schweitzer@cinchsystems.com
1 | Request for Confidentiality | Cover Letter(s) | 237.97 KiB | April 16 2020 |
Cinch Systems, Inc. 12075 43rd St NE Suite 300 St Michael, MN 55376 USA Confidentiality Request FCC ID: 2ABBZ-RF-UTCO-433 Pursuant to Sections 0.457(d) and 0.459 of the Commissions Rules, Cinch Systems hereby requests permanent confidential treatment of information accompanying this application as outlined below:
Common exhibits for which confidentiality is requested are:
Schematics:
Block Diagrams:
Theory of Operation:
Cinch Systems also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of 180 days:
Exhibits for which short-term confidentiality is commonly requested are:
Internal Photos:
External Photos:
User Manual:
Test Set-up Photographs:
The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Company Officer:
Telephone Number:
Email:
Vice President 763-497-1059 jim.schweitzer@cinchsystems.com
1 | Test Setup Photos | Test Setup Photos | 1.53 MiB | April 16 2020 / October 13 2020 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-04-16 | 433.95 ~ 433.95 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2020-04-16
|
||||
1 | Applicant's complete, legal business name |
Cinch Systems, Inc
|
||||
1 | FCC Registration Number (FRN) |
0023115124
|
||||
1 | Physical Address |
12075 43 st ne Suite 300
|
||||
1 |
12075 43 st ne
|
|||||
1 |
St Michael, MN
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@element.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ABBZ
|
||||
1 | Equipment Product Code |
RF-UTCO-433
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J**** C****** C********
|
||||
1 | Title |
CEO
|
||||
1 | Telephone Number |
76349********
|
||||
1 | Fax Number |
76349********
|
||||
1 |
m******@cinchsystems.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/13/2020 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RF-UT-Ei-CO-433-CLR, CLR-C1-CO | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Element Materials Technology Minneapolis
|
||||
1 | Name |
R****** W******
|
||||
1 | Telephone Number |
503-8********
|
||||
1 | Fax Number |
503-8********
|
||||
1 |
r******@element.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | 433.95000000 | 433.95000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC