all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 544.05 KiB | August 12 2008 | |||
1 | Parts List/Tune Up Info | August 12 2008 | ||||||
1 | Attestation Statements | August 12 2008 | ||||||
1 | Cover Letter(s) | August 12 2008 | ||||||
1 | Cover Letter(s) | August 12 2008 | ||||||
1 | External Photos | August 12 2008 | ||||||
1 | Internal Photos | August 12 2008 | ||||||
1 | ID Label/Location Info | August 12 2008 | ||||||
1 | Cover Letter(s) | August 12 2008 | ||||||
1 | Test Report | August 12 2008 | ||||||
1 | Test Setup Photos | August 12 2008 |
1 | User manual | Users Manual | 544.05 KiB | August 12 2008 |
DOCVersion2.21 Thisdocumentisspecificallydesignedfortheusertoprinttwopagespersheetofpaperwithoptimal printquality. Copyright 2005~ 2008 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development this information may change without notice. The information and intellectual property contained herein is confidential between CIPHERLAB and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find any problems in the documentation, please report them to us in writing. CIPHERLAB does not warrant that this document is error-free. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of CIPHERLAB CO., LTD. For product consultancy and technical support, please contact your local sales representative. Also, you may visit our web site for more information. The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. The editorial use of these names is for identification as well as to the benefit of the owners, with no intention of infringement. CIPHERLAB CO., LTD. Website: http://www.cipherlab.com RELEASE NOTES VERSION DATE 2.21 2.20 NOTES Larger setup barcodes Jan. 02, 2008 Nov. 30, 2007 New Word template applied
New: 3667 Bluetooth Cradle for 1166/1266
Modified: Auto-Sense mode supported on 1100 only.
New: Appendix III Host Serial Commands
New: Appendix IV Upgrading Firmware 2.15 2.14~
2.12 2.11 2.10 Nov.13, 2006 Modified: Add notice for BT SPP and HID power saving Please disable power saving when connecting more than two 1x66 scanners to Bluetooth dongle.
New: Bluetooth HID supports Japanese keyboard. Nov. 06, 2006 Mar. 03, 2006 Jan.27, 2006 Modified: Typo errors corrected. Jan.18, 2006 Modified: Bluetooth HID doesnt support the following functions on PDAs running Windows CE Capital Lock Setting: Auto Detection, Digit Transmission: Numeric Key, and Alt Composing.
Modified: The default Capital Lock setting of Bluetooth HID is changed from Auto Detection to Capital Lock Off.
New: Firmware version V4.20 2.00 Dec. 30, 2005 New: Bluetooth HID supported 1.00 Oct. 31, 2005
New: Firmware version V4.10 First release CONTENTS RELEASE NOTES .................................................................................................................................. 3 OVERVIEW............................................................................................................................................ 1 Enter Configuration Mode................................................................................................................. 1 Exit Configuration Mode.................................................................................................................... 1 Update Settings............................................................................................................................ 1 Exit without Changes.................................................................................................................... 1 Restore Defaults................................................................................................................................ 1 List Current Settings.......................................................................................................................... 2 BLUETOOTH SETTINGS (1166/1266)................................................................................................. 3 1.1 RF Auto Shutdown (Suspend mode) ......................................................................................... 3 1.2 Power Saving (Sniff Mode)......................................................................................................... 3 1.3 Transmit Buffer Setting .............................................................................................................. 3 1.4 Memory Mode............................................................................................................................. 3 1.4.1 Memory Mode .................................................................................................................... 3 1.4.2 Send Data........................................................................................................................... 4 1.4.3 Clear Data........................................................................................................................... 4 1.4.4 Memory Data Delay............................................................................................................ 4 1.5 Set Connection with 3666 ......................................................................................................... 5 1.6 Set Connection with 3667 or Generic Dongle .......................................................................... 5 1.6.1 Bluetooth Serial Port Parameters ..................................................................................... 5 1.6.2 Bluetooth HID Parameters................................................................................................. 6 READER SETTINGS .............................................................................................................................. 9 2.1 Good Read Notification .............................................................................................................. 9 2.1.1 Buzzer Setting .................................................................................................................... 9 2.1.2 Buzzer Frequency............................................................................................................... 9 2.2 Read Redundancy ...................................................................................................................... 9 2.3 Scan Mode .................................................................................................................................. 9 2.4 Auto-Sense Mode (1100 only) .................................................................................................10 2.5 Scanner Time-Out .....................................................................................................................10 2.6 Delay between Re-read ............................................................................................................10 2.7 Negative Barcode Setting ........................................................................................................11 OUTPUT INTERFACES.........................................................................................................................13 3.1 Keyboard Wedge Parameters..................................................................................................13 3.1.1 Activate and Select Keyboard Type.................................................................................13 3.1.2 Alphabets Layout..............................................................................................................14 3.1.3 Digits Layout.....................................................................................................................14 3.1.4 Capital Lock Type .............................................................................................................14 3.1.5 Capital Lock Setting .........................................................................................................14 3.1.6 Alphabets Transmission ..................................................................................................15 Scanner Configuration SmartScan Manual 3.1.7 Digits Transmission..........................................................................................................15 3.1.8 ALT Composing.................................................................................................................15 3.1.9 Inter-Character Delay .......................................................................................................15 3.1.10 Laptop Support ..............................................................................................................15 3.2 RS-232 Parameters..................................................................................................................16 3.2.1 Activate RS-232 Interface ...............................................................................................16 3.2.2 Baud Rate.........................................................................................................................16 3.2.3 Parity .................................................................................................................................16 3.2.4 Data Bits ...........................................................................................................................17 3.2.5 Flow Control......................................................................................................................17 3.2.6 Inter-Character Delay .......................................................................................................17 3.3 WAND Emulation Parameters (1090+/1100/1105/1200) .................................................18 3.3.1 Activate Wand Emulation.................................................................................................18 3.3.2 Normal State ....................................................................................................................18 3.3.3 Bar State...........................................................................................................................18 3.3.4 Module Time.....................................................................................................................18 3.3.5 Margin Time......................................................................................................................19 SYMBOLOGY SETTINGS.....................................................................................................................21 4.1 Select Readable Barcodes.......................................................................................................21 4.2 Codabar Parameters ................................................................................................................25 4.3 Code 25 Parameters ................................................................................................................26 4.3.1 Industrial 25 .....................................................................................................................26 4.3.2 Interleaved 25 ..................................................................................................................27 4.3.3 Matrix 25 ..........................................................................................................................28 4.4 Code 39 Parameters ................................................................................................................30 4.5 Code 93 Parameters ................................................................................................................30 4.6 Code 128 Parameters..............................................................................................................30 4.7 EAN-8 Parameters ....................................................................................................................31 4.8 EAN-13 Parameters..................................................................................................................32 4.9 EAN-128 Parameters................................................................................................................33 4.10 MSI Parameters......................................................................................................................34 4.11 Pharmacode Parameters.......................................................................................................36 4.11.1 French Pharmacode ......................................................................................................36 4.11.2 Italian Pharmacode .......................................................................................................36 4.12 Plessey Parameters ...............................................................................................................37 4.13 RSS Family Parameters .........................................................................................................38 4.13.1 RSS-14............................................................................................................................38 4.13.2 RSS Limited....................................................................................................................38 4.13.3 RSS Expanded................................................................................................................39 4.14 Telepen Parameters...............................................................................................................40 4.15 UPC-A Parameters ..................................................................................................................41 4.16 UPC-E Parameters ..................................................................................................................42 DATA OUTPUT FORMAT......................................................................................................................43 5.1 Character Substitution .............................................................................................................43 5.2 Prefix/Suffix Setting..................................................................................................................43 Scanner Configuration SmartScan Manual 5.3 Code ID Setting .........................................................................................................................43 5.3.1 Clear Code ID Settings.....................................................................................................43 5.3.2 Select Pre-defined Code ID..............................................................................................44 5.3.3 Change Code ID................................................................................................................44 5.4 Length Code Setting .................................................................................................................45 DATA EDITING ....................................................................................................................................49 6.1 Format Selection ......................................................................................................................49 6.1.1 Activate Editing Formats..................................................................................................49 6.1.2 Exclusive Data Editing......................................................................................................49 6.2 Editing Format Parameters ......................................................................................................50 6.2.1 Select Format to Configure..............................................................................................50 6.2.2 Restore Default Format ...................................................................................................50 6.2.3 Define Data Criteria .........................................................................................................50 6.2.4 Divide Data into Fields.....................................................................................................52 6.2.5 Additional Fields...............................................................................................................55 6.2.6 Field Transmission Sequence .........................................................................................56 NUMERAL SYSTEMS..........................................................................................................................57 Decimal System...............................................................................................................................57 Hexadecimal System.......................................................................................................................58 KEYBOARD WEDGE TABLE & ASCII TABLE........................................................................................ 59 Keyboard Wedge Table ...................................................................................................................59 Key Type......................................................................................................................................59 Key Status ..................................................................................................................................60 ASCII Table.......................................................................................................................................60 HOST SERIAL COMMANDS ................................................................................................................61 Serial Commands............................................................................................................................61 Example ...........................................................................................................................................61 UPGRADING FIRMWARE....................................................................................................................63 How to Upgrade 1166/1266 Firmware.........................................................................................63 Using 3666.................................................................................................................................63 Using 3667 or Generic Dongle..................................................................................................64 How to Upgrade 3666 Firmware ....................................................................................................65 Find out Firmware Version of 3666 ..........................................................................................65 OVERVIEW ENTER CONFIGURATION MODE Serial Command N/A EXIT CONFIGURATION MODE UPDATE SETTINGS Serial Command 9999 EXIT WITHOUT CHANGES Serial Command 9998 RESTORE DEFAULTS Serial Command 9993 Enter Setup Update Abort Restore Defaults Note: The default value (if there is) for each setting is included in a pair of angle brackets <>. 1 Update Scanner Configuration SmartScan Manual LIST CURRENT SETTINGS Serial Command 9950 Serial Command 9951 Serial Command 9952 Serial Command 9953 Serial Command 9954 Serial Command 9955 Serial Command 9956 Serial Command 9957 Serial Command 9958 Serial Command 9959 2 Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 List settings regarding Interface, Buzzer, and Scanner Parameters List settings regarding Prefix, Postfix, and Length Code Setting List settings regarding Code ID List settings regarding: Readable Symbologies List settings regarding Symbology Parameters
(1/3) List settings regarding Symbology Parameters
(2/3) List settings regarding Symbology Parameters
(3/3) List settings regarding Editing Format 1 List settings regarding Editing Format 2 List settings regarding Editing Format 3 Page 10 Enter Setup BLUETOOTH SETTINGS (1166/1266) Chapter 1 1.1 RF AUTO SHUTDOWN (SUSPEND MODE) 1) Read this label to specify the time interval before the scanner enters suspend mode. 2) Read the Decimal Value label on page 57. For example, read 1 and 5 for the scanner to suspend the connection with 3666 after being idle for 15 minutes. 3) Read the Validate label on the same page to complete this setting. Serial Command 0445 RF Auto Shutdown after minutes 1.2 POWER SAVING (SNIFF MODE) Serial Command 0458 Serial Command 0459
<Enable>
Disable 1.3 TRANSMIT BUFFER SETTING Serial Command 0386 Serial Command 0387 Enable
<Disable>
1.4 MEMORY MODE 1.4.1 MEMORY MODE Serial Command 0321 Serial Command 0320 Enable
<Disable>
3 Update Scanner Configuration SmartScan Manual 1.4.2 SEND DATA Serial Command 9918 1.4.3 CLEAR DATA Send Data 1) Read the Clear Data label to clear the flash memory. 2) Read the Confirm label to confirm the action. Serial Command 9916 Serial Command 9917 Clear Data Confirm 1.4.4 MEMORY DATA DELAY Serial Command 0322 Serial Command 0324 Serial Command 0326 Serial Command 0328
<None>
500 ms 2 sec Serial Command 0323 Serial Command 0325 Serial Command 0327 Serial Command 0329 5 sec 4 Enter Setup 250 ms 1 sec 3 sec 8 sec Chapter 1 Bluetooth Settings (1166/1266) 1.5 SET CONNECTION WITH 3666 1) Read this label or the same one at the bottom of the 3666 cradle. 2) Read the Serial Number label at the bottom of the cradle within 5 seconds. 3) Proceed to select a desired output interface. Serial Command Set Connection 1.6 SET CONNECTION WITH 3667 OR GENERIC DONGLE 1.6.1 BLUETOOTH SERIAL PORT PARAMETERS Serial Command 0453 DEVICE NAME BROADCASTING Serial Command 0450 Activate Bluetooth SPP Serial Command 0451
<Yes>
No AUTHENTICATION Serial Command 0448 Serial Command 0449 Yes
<No>
PIN CODE 1) Read this label to specify the PIN code. 2) Read the Hexadecimal Value label on page 58 for the desired character string (max. 6 characters are allowed). 3) Read the Validate label on the same page to complete this setting. Serial Command 0452 Enter PIN Code 5 Update Scanner Configuration SmartScan Manual 1.6.2 BLUETOOTH HID PARAMETERS 1) Read this label to activate Bluetooth HID and select a keyboard type. 2) Read the Decimal Value label on page 57. Refer to the table below for the number of desired keyboard type. 3) Read the Validate label on the same page to complete this setting. Serial Command 0000 NO. KEYBOARD TYPE 64 65 66 67 68 69 PCAT (US) PCAT (French) PCAT (German) PCAT (Italian) PCAT (Swedish) PCAT (Norwegian) Activate & Select Keyboard Type NO. KEYBOARD TYPE 70 71 72 73 74 PCAT (UK) PCAT (Belgium) PCAT (Spanish) PCAT (Portuguese) PS55 A01-2 (Japanese) RESET CONNECTION Read this label when switching connection from one PC to another and re-connection is required. Serial Command 9972 DEVICE NAME BROADCASTING Serial Command 0450 Reset Connection Serial Command 0451
<Yes>
No AUTHENTICATION Serial Command 0448 Serial Command 0449 Yes
<No>
6 Enter Setup Chapter 1 Bluetooth Settings (1166/1266) PIN CODE 1) Read this label to specify the PIN code. 2) Read the Hexadecimal Value label on page 58 for the desired character string (max. 6 characters are allowed). 3) Read the Validate label on the same page to complete this setting. Serial Command 0452 ALPHABETS LAYOUT Serial Command 0312 Serial Command 0314
<Default Layout>
QWERTZ DIGITS LAYOUT Serial Command 0007 Serial Command 0009
<Default Layout>
Lower Row CAPITAL LOCK TYPE Serial Command 0010 Serial Command 0012
<Default>
Capital Lock Enter PIN Code Serial Command 0313 AZERTY Serial Command 0008 Upper Row Serial Command 0011 Shift Lock 7 Update Scanner Configuration SmartScan Manual CAPITAL LOCK SETTING Serial Command 0002 Serial Command 0004 Auto Detection
<Capital Lock OFF>
Serial Command 0003 Capital Lock ON ALPHABETS TRANSMISSION Serial Command 0005 Serial Command 0006 Ignore Case
<Case-Sensitive>
DIGITS TRANSMISSION Serial Command 0013 Serial Command 0014 Numeric Key
<Alphanumeric Key>
ALT COMPOSING Serial Command 0335 Serial Command 0334 8 Yes
<No>
Enter Setup Chapter 2 READER SETTINGS 2.1 GOOD READ NOTIFICATION 2.1.1 BUZZER SETTING Serial Command 0318 Serial Command 0319
<Enable Buzzer>
Disable Buzzer 2.1.2 BUZZER FREQUENCY Serial Command 0046 Serial Command 0048 8 kHz Serial Command 0047 Serial Command 0049
<4 kHz>
2 kHz 1 kHz 2.2 READ REDUNDANCY Serial Command 0201 Serial Command 0203
<No Redundancy>
Serial Command 0202 Serial Command 0204 One Time Two Times Three Times 2.3 SCAN MODE Serial Command 0066 Serial Command 0067
<Auto Off Mode>
(Default for 1000/1090+) Continuous Mode 9 Update Scanner Configuration SmartScan Manual Serial Command 0068 Serial Command 0070 Serial Command 0072 Serial Command 0069 Auto Power Off Mode Alternate Mode Serial Command 0071 Momentary Mode Serial Command 0073 Repeat Mode
<Laser Mode>
(Default for 1100/1105/1166/1200/1266) Test Mode 2.4 AUTO-SENSE MODE (1100 ONLY) Serial Command 0333 Serial Command 0332 Enable
<Disable>
2.5 SCANNER TIME-OUT 1) Read this label to specify the time interval before the scan engine times out in Laser, Auto Off, or Auto Power Off mode. 2) Read the Decimal Value label on page 57. For example, read 1 and 0 for the scanner to automatically shut down after being idle for 10 seconds. 3) Read the Validate label on the same page to complete this setting. Serial Command 0207 Scanner Time-Out after seconds 2.6 DELAY BETWEEN RE-READ Serial Command 0336 Serial Command 0337 100 ms 200 ms 10 Enter Setup Chapter 2 Reader Settings Serial Command 0338 Serial Command 0340 Serial Command 0342
<400 ms>
1 sec Serial Command 0339 Serial Command 0341 Serial Command 0343 800 ms 2 sec 3 sec 5 sec 2.7 NEGATIVE BARCODE SETTING Serial Command 0199 Serial Command 0200 Enable
<Disable>
11 Update Scanner Configuration SmartScan Manual 12 Enter Setup Chapter 3 OUTPUT INTERFACES 3.1 KEYBOARD WEDGE PARAMETERS 3.1.1 ACTIVATE AND SELECT KEYBOARD TYPE 1) Read this label to activate Keyboard Wedge and select a keyboard type. 2) Read the Decimal Value label on page 57. Refer to the table below for the number of desired keyboard type. 3) Read the Validate label on the same page to complete this setting. Serial Command 0000 NO. KEYBOARD TYPE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PCAT (US) PCAT (French) PCAT (German) PCAT (Italian) PCAT (Swedish) PCAT (Norwegian) PCAT (UK) PCAT (Belgium) PCAT (Spanish) PCAT (Portuguese) PS55 A01-1 PS55 A01-2 (Japanese) PS55 A01-3 PS55 001-1 Activate & Select Keyboard Type NO. KEYBOARD TYPE 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PS55 001-81 PS55 001-2 PS55 001-82 PS55 001-3 PS55 001-8A PS55 002-1, 003-1 PS55 002-81, 003-81 PS55 002-2, 003-2 PS55 002-82, 003-82 PS55 002-3, 003-3 PS55 002-8A, 003-8A IBM 3477 Type 4 (Japanese) PS2-30 IBM 34XX/319X, Memorex Telex 122 Keys 13 Update Scanner Configuration SmartScan Manual 3.1.2 ALPHABETS LAYOUT Serial Command 0312 Serial Command 0313 Serial Command 0314
<Default Layout>
QWERTZ AZERTY 3.1.3 DIGITS LAYOUT Serial Command 0007 Serial Command 0009
<Default Layout>
Lower Row 3.1.4 CAPITAL LOCK TYPE Serial Command 0010 Serial Command 0012
<Default>
Capital Lock 3.1.5 CAPITAL LOCK SETTING Serial Command 0002 Serial Command 0008 Upper Row Serial Command 0011 Shift Lock Serial Command 0003 Auto Detection Capital Lock ON
<Capital Lock OFF>
Serial Command 0004 14 Enter Setup Chapter 3 Output Interfaces 3.1.6 ALPHABETS TRANSMISSION Serial Command 0005 Serial Command 0006 Ignore Case
<Case-Sensitive>
3.1.7 DIGITS TRANSMISSION Serial Command 0013 Serial Command 0014 Numeric Key
<Alphanumeric Key>
3.1.8 ALT COMPOSING Serial Command 0335 Serial Command 0334 Yes
<No>
3.1.9 INTER-CHARACTER DELAY 1) Read this label to specify the inter-character delay. 2) Read the Decimal Value label on page 57 for the desired inter-character delay (millisecond). 3) Read the Validate label on the same page to complete this setting. Serial Command 0015 3.1.10 LAPTOP SUPPORT Serial Command 0389 Inter-Character Delay Serial Command 0388 Enable
<Disable>
15 Update Scanner Configuration SmartScan Manual 3.2 RS-232 PARAMETERS 3.2.1 ACTIVATE RS-232 INTERFACE Serial Command 0001 3.2.2 BAUD RATE Serial Command 0023 Serial Command 0017 Serial Command 0019 Serial Command 0021 115200 bps 19200 bps 4800 bps Activate RS-232 Interface Serial Command 0016 Serial Command 0018 Serial Command 0020 Serial Command 0022 38400 bps
<9600 bps>
2400 bps 1200 bps 600 bps
(for 1200 only) Serial Command 0029
<No Parity>
Even Odd 3.2.3 PARITY Serial Command 0028 Serial Command 0030 16 Enter Setup Chapter 3 Output Interfaces 3.2.4 DATA BITS Serial Command 0034 Serial Command 0035
<8 bits>
7 bits 3.2.5 FLOW CONTROL Serial Command 0042 Serial Command 0044
<None>
Serial Command 0043 Serial Command 0045 Scanner Ready Data Ready Invert Data Ready 3.2.6 INTER-CHARACTER DELAY 1) Read this label to specify the inter-character delay. 2) Read the Decimal Value label on page 57 for the desired inter-character delay (millisecond). 3) Read the Validate label on the same page to complete this setting. Serial Command 0015 Inter-Character Delay 17 Update Scanner Configuration SmartScan Manual 3.3 WAND EMULATION PARAMETERS (1090+/1100/1105/1200) 3.3.1 ACTIVATE WAND EMULATION Serial Command 0306 3.3.2 NORMAL STATE Serial Command 0302 Activate Wand Emulation Serial Command 0303 High
<Low>
3.3.3 BAR STATE Serial Command 0304 Serial Command 0305
<High>
Low 250 s
<1 ms>
2 ms Serial Command 0363 Serial Command 0365 Serial Command 0367 Serial Command 0369 500 s 1.5 ms 3 ms 4 ms 5 ms 3.3.4 MODULE TIME Serial Command 0362 Serial Command 0364 Serial Command 0366 Serial Command 0368 18 Enter Setup Chapter 3 Output Interfaces 3.3.5 MARGIN TIME Serial Command 0370 Serial Command 0372 Serial Command 0374 Serial Command 0376 5 ms
<20 ms>
40 ms Serial Command 0371 Serial Command 0373 Serial Command 0375 Serial Command 0377 10 ms 30 ms 60 ms 80 ms 100 ms 19 Update Scanner Configuration SmartScan Manual 20 Enter Setup Chapter 4 SYMBOLOGY SETTINGS 4.1 SELECT READABLE BARCODES CODABAR Serial Command 0086 Serial Command 0087
<Enable>
Disable CODE 39 Serial Command 0074 Serial Command 0075
<Enable>
Disable CODE 93 Serial Command 0088 Serial Command 0089
<Enable>
Disable CODE 128 Serial Command 0090 Serial Command 0091
<Enable>
Disable EAN-128 Serial Command 0104 Serial Command 0105 Enable
<Disable>
EAN-13 Serial Command 0106 Serial Command 0107
<Enable No Addon>
Disable No Addon 21 Update Scanner Configuration SmartScan Manual Serial Command 0108 Serial Command 0110 Enable Addon 2 Serial Command 0109 Serial Command 0111
<Disable Addon 2>
Enable Addon 5
<Disable Addon 5>
EAN-8 Serial Command 0098 Serial Command 0100 Serial Command 0102
<Enable No Addon>
Enable Addon 2 Serial Command 0099 Serial Command 0101 Serial Command 0103 Disable No Addon
<Disable Addon 2>
Enable Addon 5
<Disable Addon 5>
FRENCH PHARMACODE Serial Command 0078 Serial Command 0079 Enable
<Disable>
ITALIAN PHARMACODE Serial Command 0076 Serial Command 0077 Enable
<Disable>
INDUSTRIAL 25 Serial Command 0080 Serial Command 0081
<Enable>
Disable 22 Enter Setup Chapter 4 Symbology Settings INTERLEAVED 25 Serial Command 0082 Serial Command 0083
<Enable>
Disable MATRIX 25 Serial Command 0084 Serial Command 0085 Enable
<Disable>
MSI Serial Command 0112 Serial Command 0113 Enable
<Disable>
PLESSEY Serial Command 0114 Serial Command 0115 Enable
<Disable>
RSS-14 & EXPANDED Serial Command 0412 RSS LIMITED Serial Command 0414 Serial Command 413 Enable RSS-14 & RSS Expanded
<Disable Both>
Serial Command 0415 Enable
<Disable>
TELEPEN Serial Command 0436 Serial Command 0437 Enable
<Disable>
23 Update Scanner Configuration SmartScan Manual UPC-A Serial Command 0291 Serial Command 0293 Serial Command 0295
<Enable No Addon>
Enable Addon 2 Serial Command 0292 Serial Command 0294 Serial Command 0296 Disable No Addon
<Disable Addon 2>
Enable Addon 5
<Disable Addon 5>
UPC-E Serial Command 0092 Serial Command 0094 Serial Command 0096
<Enable No Addon>
Enable Addon 2 Serial Command 0093 Serial Command 0095 Serial Command 0097 Disable No Addon
<Disable Addon 2>
Enable Addon 5
<Disable Addon 5>
24 Enter Setup Chapter 4 Symbology Settings 4.2 CODABAR PARAMETERS Serial Command 0086 Serial Command 0087
<Enable>
Disable START / STOP CHARACTERS SELECTION Serial Command 0151 Serial Command 0153
<abcd/abcd>
Serial Command 0152 Serial Command 0154 abcd/tn*e ABCD/ABCD ABCD/TN*E START / STOP TRANSMISSION Serial Command 0155 Serial Command 0156 Enable
<Disable>
CLSI CONVERSION Serial Command 0157 Serial Command 0158 Enable
<Disable>
25 Update Scanner Configuration SmartScan Manual 4.3 CODE 25 PARAMETERS 4.3.1 INDUSTRIAL 25 Serial Command 0080 Serial Command 0081
<Enable>
Disable START / STOP PATTERN SELECTION Serial Command 0130 Serial Command 0131 Serial Command 0132
<Industrial 25>
Matrix 25 Interleaved 25 CHECKSUM VERIFICATION Serial Command 0139 Serial Command 0140 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0141 Serial Command 0142
<Enable>
Disable CODE LENGTH QUALIFICATION 1) Read the label to enable either Max. /Min. length qualification or fixed length qualification. 2) Read the labels for Max. /Min or fixed length separately. 3) Read the Decimal Value label on page 57 for the desired inter-character delay (millisecond). 4) Read the Validate label on the same page to complete this setting. Serial Command 0208 26 Enable Max./Min. Length Enter Setup Serial Command 0210 Serial Command 0209 Serial Command 0210 Chapter 4 Symbology Settings Serial Command 0211 Max. Length Min. Length Enable Fixed Length Serial Command 0211 Fixed Length 1 Fixed Length 2 4.3.2 INTERLEAVED 25 Serial Command 0082 Serial Command 0083
<Enable>
Disable START / STOP PATTERN SELECTION Serial Command 0133 Serial Command 0134 Serial Command 0135 Industrial 25 Matrix 25
<Interleaved 25>
CHECKSUM VERIFICATION Serial Command 0143 Serial Command 0144 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0145 Serial Command 0146
<Enable>
Disable 27 Update Scanner Configuration SmartScan Manual CODE LENGTH QUALIFICATION 1) Read the label to enable either Max. /Min. length qualification or fixed length qualification. 2) Read the labels for Max. /Min or fixed length separately. 3) Read the Decimal Value label on page 57 for the desired inter-character delay (millisecond). 4) Read the Validate label on the same page to complete this setting. Serial Command 0212 Serial Command 0214 Serial Command 0213 Serial Command 0214 Enable Max./Min. Length Serial Command 0215 Max. Length Min. Length Enable Fixed Length Serial Command 0215 Fixed Length 1 Fixed Length 2 4.3.3 MATRIX 25 Serial Command 0084 Serial Command 0085 Enable
<Disable>
START / STOP PATTERN SELECTION Serial Command 0136 Serial Command 0137 Serial Command 0138 Industrial 25
<Matrix 25>
28 Interleaved 25 Enter Setup Chapter 4 Symbology Settings CHECKSUM VERIFICATION Serial Command 0147 Serial Command 0148 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0149 Serial Command 0150
<Enable>
Disable CODE LENGTH QUALIFICATION 1) Read the label to enable either Max. /Min. length qualification or fixed length qualification. 2) Read the labels for Max. /Min or fixed length separately. 3) Read the Decimal Value label on page 57 for the desired inter-character delay (millisecond). 4) Read the Validate label on the same page to complete this setting. Serial Command 0216 Serial Command 0218 Serial Command 0217 Serial Command 0218 Enable Max./Min. Length Serial Command 0219 Max. Length Min. Length Enable Fixed Length Serial Command 0219 Fixed Length 1 Fixed Length 2 29 Update Scanner Configuration SmartScan Manual 4.4 CODE 39 PARAMETERS Serial Command 0074 Serial Command 0075
<Enable>
Disable START / STOP TRANSMISSION Serial Command 0116 Serial Command 0117 Enable
<Disable>
CHECKSUM VERIFICATION Serial Command 0118 Serial Command 0119 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0120 Serial Command 0121
<Enable>
Disable STANDARD / FULL ASCII CODE 39 Serial Command 0122 Serial Command 0123 Full ASCII
<Standard>
4.5 CODE 93 PARAMETERS Serial Command 0088 Serial Command 0089
<Enable>
Disable 4.6 CODE 128 PARAMETERS Serial Command 0090 Serial Command 0091
<Enable>
Disable 30 Enter Setup Chapter 4 Symbology Settings 4.7 EAN-8 PARAMETERS Serial Command 0098 Serial Command 0100 Serial Command 0102
<Enable No Addon>
Enable Addon 2 Serial Command 0099 Serial Command 0101 Serial Command 0103 Disable No Addon
<Disable Addon 2>
Enable Addon 5
<Disable Addon 5>
CONVERT TO EAN-13 Serial Command 0195 Serial Command 0196 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0187 Serial Command 0188
<Enable>
Disable 31 Update Scanner Configuration SmartScan Manual 4.8 EAN-13 PARAMETERS Serial Command 0106 Serial Command 0108 Serial Command 0110
<Enable No Addon>
Enable Addon 2 Serial Command 0107 Serial Command 0109 Serial Command 0111 Disable No Addon
<Disable Addon 2>
Enable Addon 5
<Disable Addon 5>
ISBN CONVERSION Serial Command 0179 Serial Command 0180 Enable
<Disable>
ISSN CONVERSION Serial Command 0181 Serial Command 0182 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0189 Serial Command 0190
<Enable>
Disable 32 Enter Setup Chapter 4 Symbology Settings 4.9 EAN-128 PARAMETERS Serial Command 0104 Serial Command 0105 Enable
<Disable>
CODE ID TRANSMISSION Serial Command 0434 Serial Command 0435 Enable
<Disable>
FIELD SEPARATOR Serial Command 0301 Enable Field Separator 1) Read this label to enable field separator. 2) Read the Hexadecimal Value label on page 58 for the desired character string. 3) Read the Validate label on the same page to complete this setting. 33 Update Scanner Configuration SmartScan Manual 4.10 MSI PARAMETERS Serial Command 0112 Serial Command 0113 Enable
<Disable>
CHECKSUM VERIFICATION Serial Command 0167 Serial Command 0168 Serial Command 0169
<Single Modulo 10>
Modulo 10 & 11 Double Modulo 10 CHECKSUM TRANSMISSION Serial Command 0170 Serial Command 0172 Serial Command 0171
<Last Digit Not Transmitted>
Both Digits Transmitted Both Digits Not Transmitted CODE LENGTH QUALIFICATION 1) Read the label to enable either Max. /Min. length qualification or fixed length qualification. 2) Read the labels for Max. /Min or fixed length separately. 3) Read the Decimal Value label on page 57 for the desired inter-character delay (millisecond). 4) Read the Validate label on the same page to complete this setting. Serial Command 0220 34 Enable Max./Min. Length Enter Setup Serial Command 0222 Serial Command 0221 Serial Command 0222 Chapter 4 Symbology Settings Serial Command 0223 Max. Length Min. Length Enable Fixed Length Serial Command 0223 Fixed Length 1 Fixed Length 2 35 Update Scanner Configuration SmartScan Manual 4.11 PHARMACODE PARAMETERS 4.11.1 FRENCH PHARMACODE Serial Command 0078 Serial Command 0079 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0128 Serial Command 0129
<Enable>
Disable 4.11.2 ITALIAN PHARMACODE Serial Command 0076 Serial Command 0077 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0126 Serial Command 0127
<Enable>
Disable 36 Enter Setup Chapter 4 Symbology Settings 4.12 PLESSEY PARAMETERS Serial Command 0114 Serial Command 0115 Enable
<Disable>
CONVERT TO UK PLESSEY Serial Command 0165 Serial Command 0166 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0163 Serial Command 0164
<Enable>
Disable 37 Update Scanner Configuration SmartScan Manual 4.13 RSS FAMILY PARAMETERS CODE ID SELECTION Serial Command 0432 Serial Command 0433
]C1
<]e0>
4.13.1 RSS-14 Serial Command 0412 CODE ID TRANSMISSION Serial Command 0418 Serial Command 413 Enable RSS-14 & RSS Expanded
<Disable Both>
Serial Command 0419
<Enable>
Disable APPLICATION ID TRANSMISSION Serial Command 0424 Serial Command 0425
<Enable>
Disable CHECKSUM TRANSMISSION Serial Command 0428 Serial Command 0429
<Enable>
Disable 4.13.2 RSS LIMITED Serial Command 0414 Serial Command 0415 38 Enable
<Disable>
Enter Setup Chapter 4 Symbology Settings CODE ID TRANSMISSION Serial Command 0420 Serial Command 0421
<Enable>
Disable APPLICATION ID TRANSMISSION Serial Command 0426 Serial Command 0427
<Enable>
Disable CHECKSUM TRANSMISSION Serial Command 0430 Serial Command 0431
<Enable>
Disable 4.13.3 RSS EXPANDED Serial Command 0412 Serial Command 413 Enable RSS-14 & RSS Expanded
<Disable Both>
CODE ID TRANSMISSION Serial Command 0422 Serial Command 0423
<Enable>
Disable 39 Update Scanner Configuration SmartScan Manual 4.14 TELEPEN PARAMETERS Serial Command 0436 Serial Command 0437 Enable
<Disable>
TELEPEN OUTPUT Serial Command 0440 Serial Command 0441 Original Telepen
(Numeric)
<AIM Telepen>
APPLY ALL 3 EDITING FORMATS Serial Command 0443 Serial Command 0444 40
<Apply All to Telepen>
Disable All Enter Setup Chapter 4 Symbology Settings 4.15 UPC-A PARAMETERS Serial Command 0291 Serial Command 0293 Serial Command 0295
<Enable No Addon>
Enable Addon 2 Serial Command 0292 Serial Command 0294 Serial Command 0296 Disable No Addon
<Disable Addon 2>
Enable Addon 5
<Disable Addon 5>
CONVERT TO EAN-13 Serial Command 0177 Serial Command 0178
<Enable>
Disable SYSTEM NUMBER TRANSMISSION Serial Command 0193 Serial Command 0194
<Enable>
Disable CHECKSUM TRANSMISSION Serial Command 0185 Serial Command 0186
<Enable>
Disable 41 Update Scanner Configuration SmartScan Manual 4.16 UPC-E PARAMETERS Serial Command 0092 Serial Command 0094 Serial Command 0096
<Enable No Addon>
Enable Addon 2 Serial Command 0093 Serial Command 0095 Serial Command 0097 Disable No Addon
<Disable Addon 2>
Enable Addon 5
<Disable Addon 5>
SYSTEM NUMBER SELECTION Serial Command 0287 Serial Command 0288 System Number 0 & 1
<System Number 0 Only>
CONVERT TO UPC-A Serial Command 0175 Serial Command 0176 Enable
<Disable>
SYSTEM NUMBER TRANSMISSION Serial Command 0191 Serial Command 0192 Enable
<Disable>
CHECKSUM TRANSMISSION Serial Command 0183 Serial Command 0184 42
<Enable>
Disable Enter Setup Chapter 5 DATA OUTPUT FORMAT 5.1 CHARACTER SUBSTITUTION 1) Read the label to enable either character substitution by set. 2) Read the Hexadecimal Value label on page 58 for the desired character string. For example, read 3, 0, 2 and D for the scanner to replace the character [0] with a dash [-]. 3) Read the Validate label on the same page to complete this setting. Serial Command 0309 Serial Command 0311 Serial Command 0310 Set 1 Set 2 Set 3 5.2 PREFIX/SUFFIX SETTING 1) Read the label to apply prefix code or suffix code separately. 2) Read the Hexadecimal Value label on page 58 for the desired character string. For example, read 2 and B for the scanner to prefix or suffix the character [+]. 3) Read the Validate label on the same page to complete this setting. Serial Command 0273 Serial Command 0274 Prefix Code Suffix Code 5.3 CODE ID SETTING 5.3.1 CLEAR CODE ID SETTINGS Serial Command 9960 Clear All Code ID Settings 43 Update Scanner Configuration SmartScan Manual 5.3.2 SELECT PRE-DEFINED CODE ID Serial Command 9961 Serial Command 9963 Serial Command 9965 Code ID Set 1 Code ID Set 3 Code ID Set 5 5.3.3 CHANGE CODE ID Serial Command 9962 Serial Command 9964 Code ID Set 2 Code ID Set 4 1) Read the label of a specific symbology to change its code ID. 2) Read the Hexadecimal Value label on page 58 for the desired character string. For example, read 4 and 4 for applying the character [D] for Code ID. 3) Read the Validate label on the same page to complete this setting. Codabar Code 93 EAN-8 Serial Command 0256 Serial Command 0264 Serial Command 0267 Serial Command 0257 Code 39 Code 128 EAN-13 French Pharmacode Italian Pharmacode Serial Command 0260 Industrial 25 Interleaved 25 Serial Command 0262 Serial Command 0263 Serial Command 0266 Serial Command 0258 Serial Command 0259 44 Enter Setup Serial Command 0261 Serial Command 0269 Serial Command 0270 Matrix 25 Plessey UPC-A 5.4 LENGTH CODE SETTING Chapter 5 Data Output Format Serial Command 0268 Serial Command 0442 Serial Command 0265 MSI Telepen UPC-E CODABAR Serial Command 0236 Serial Command 0237 Enable Length Code
<Disable Length Code>
CODE 39 Serial Command 0224 Serial Command 0225 Enable Length Code
<Disable Length Code>
CODE 93 Serial Command 0238 Serial Command 0239 Enable Length Code
<Disable Length Code>
CODE 128 Serial Command 0240 Serial Command 0241 Enable Length Code
<Disable Length Code>
EAN-128 & RSS FAMILY Serial Command 0299 Serial Command 0300 Enable Length Code
<Disable Length Code>
45 Update Scanner Configuration SmartScan Manual EAN-8 Serial Command 0244 Serial Command 0245 Enable Length Code
<Disable Length Code>
EAN-13 Serial Command 0246 Serial Command 0247 Enable Length Code
<Disable Length Code>
FRENCH PHARMACODE Serial Command 0228 Serial Command 0229 Enable Length Code
<Disable Length Code>
ITALIAN PHARMACODE Serial Command 0226 Serial Command 0227 Enable Length Code
<Disable Length Code>
INDUSTRIAL 25 Serial Command 0230 Serial Command 0231 Enable Length Code
<Disable Length Code>
INTERLEAVED 25 Serial Command 0232 Serial Command 0233 Enable Length Code
<Disable Length Code>
MATRIX 25 Serial Command 0234 Serial Command 0235 Enable Length Code
<Disable Length Code>
46 Enter Setup Chapter 5 Data Output Format MSI Serial Command 0248 Serial Command 0249 Enable Length Code
<Disable Length Code>
PLESSEY Serial Command 0250 Serial Command 0251 Enable Length Code
<Disable Length Code>
TELEPEN Serial Command 0438 Serial Command 0439 Enable Length Code
<Disable Length Code>
UPC-A Serial Command 0289 Serial Command 0290 Enable Length Code
<Disable Length Code>
UPC-E Serial Command 0242 Serial Command 0243 Enable Length Code
<Disable Length Code>
47 Update Scanner Configuration SmartScan Manual 48 Enter Setup Chapter 6 DATA EDITING 6.1 FORMAT SELECTION 6.1.1 ACTIVATE EDITING FORMATS FORMAT 1 Serial Command 0281 Serial Command 0282 Enable Editing Format 1
<Disable Editing Format 1>
FORMAT 2 Serial Command 0283 Serial Command 0284 Enable Editing Format 2
<Disable Editing Format 2>
FORMAT 3 Serial Command 0285 Serial Command 0286 Enable Editing Format 3
<Disable Editing Format 3>
APPLY ALL 3 EDITING FORMATS TO TELEPEN Serial Command 0443 Serial Command 0444
<Apply All to Telepen>
Disable All 6.1.2 EXCLUSIVE DATA EDITING Serial Command 0279 Serial Command 0280 Reject Non-conforming Data
<Normal>
49 Update Scanner Configuration SmartScan Manual 6.2 EDITING FORMAT PARAMETERS 6.2.1 SELECT FORMAT TO CONFIGURE START FORMAT PROGRAMMING Serial Command 9981 Serial Command 9982 Serial Command 9983 Configure Format 1 Configure Format 2 Configure Format 3 END FORMAT PROGRAMMING Serial Command 9980 End Format Programming 6.2.2 RESTORE DEFAULT FORMAT Serial Command 9990 Restore Default Format 6.2.3 DEFINE DATA CRITERIA APPLICABLE CODE TYPE Serial Command 9992 Serial Command 9991
<Apply to All Code Types>
Serial Command 0512 Serial Command 0500 Serial Command 0514 Codabar Serial Command 0516 Code 93 50 End Format Programming Clear All Code 39 Code 128 Serial Command 0524 Serial Command 0528 Serial Command 0534 Serial Command 0590 Serial Command 0502 Serial Command 0508 Serial Command 0538 Serial Command 0584 Serial Command 0588 Serial Command 0520 Chapter 6 Data Editing EAN-8 Addon 2 EAN-13 No Addon EAN-13 Addon 5 Serial Command 0526 Serial Command 0532 Serial Command 0536 Serial Command 0504 EAN-8 No Addon EAN-8 Addon 5 EAN-13 Addon 2 EAN-128 / RSS French Pharmacode Serial Command 0506 Italian Pharmacode Interleaved 25 MSI UPC-A No Addon UPC-A Addon 5 Industrial 25 Matrix 25 Plessey UPC-A Addon 2 UPC-E No Addon Serial Command 0510 Serial Command 0540 Serial Command 0586 Serial Command 0518 Serial Command 0522 UPC-E Addon 2 UPC-E Addon 5 DATA LENGTH 1) Read the labels for Max. /Min length separately. 51 Update Scanner Configuration SmartScan Manual 2) Read the Decimal Value label on page 57 for the desired length. 3) Read the Validate label on the same page to complete this setting. Serial Command 0548 Serial Command 0549 Max. Length Min. Length MATCHING STRING 1) Read the label to specify a matching string. 2) Read the Hexadecimal Value label on page 58 for the desired character string. 3) Read the Validate label on the same page to complete this setting. Serial Command 0550 Matching String LOCATION OF MATCHING STRING 1) Read the label to specify the location of the matching string. 2) Read the Decimal Value label on page 57 for the desired location. 3) Read the Validate label on the same page to complete this setting. Serial Command 0551 Location of Matching String 6.2.4 DIVIDE DATA INTO FIELDS TOTAL NUMBER OF FIELDS Serial Command 0578 Serial Command 0580 Serial Command 0582
<One Field>
Three Fields Serial Command 0579 Serial Command 0581 Serial Command 0583 Two Fields Four Fields Five Fields Six Fields 52 End Format Programming Chapter 6 Data Editing FIELD 1 SETTING 1) Read the label to divide field by a specified terminating string. 2) Read the Hexadecimal Value label on page 58 for the desired character string. 3) Read the Validate label on the same page to complete this setting. Serial Command 0555 Select Field Terminating String Serial Command 0552 Serial Command 0553 Include String Discard String 1) Read the label to divide field by field length. 2) Read the Decimal Value label on page 57 for the desired field length. 3) Read the Validate label on the same page to complete this setting. Serial Command 0554 Divide Field by Field Length FIELD 2 SETTING 1) Read the label to divide field by a specified terminating string. 2) Read the Hexadecimal Value label on page 58 for the desired character string. 3) Read the Validate label on the same page to complete this setting. Serial Command 0559 Select Field Terminating String Serial Command 0556 Serial Command 0557 Include String Discard String 1) Read the label to divide field by field length. 2) Read the Decimal Value label on page 57 for the desired field length. 3) Read the Validate label on the same page to complete this setting. 53 Update Include String Discard String Scanner Configuration SmartScan Manual Serial Command 0558 Divide Field by Field Length FIELD 3 SETTING 1) Read the label to divide field by a specified terminating string. 2) Read the Hexadecimal Value label on page 58 for the desired character string. 3) Read the Validate label on the same page to complete this setting. Serial Command 0563 Select Field Terminating String Serial Command 0560 Serial Command 0561 1) Read the label to divide field by field length. 2) Read the the Decimal Value label on page 57 for the desired field length. 3) Read the Validate label on the same page to complete this setting. Serial Command 0562 Divide Field by Field Length FIELD 4 SETTING 1) Read the label to divide field by a specified terminating string. 2) Read the Hexadecimal Value label on page 58 for the desired character string. 3) Read the Validate label on the same page to complete this setting. Serial Command 0567 Select Field Terminating String Serial Command 0564 Serial Command 0565 Include String Discard String 1) Read the label to divide field by field length. 2) Read the Decimal Value label on page 57 for the desired field length. 54 End Format Programming Chapter 6 Data Editing 3) Read the Validate label on the same page to complete this setting. Serial Command 0566 Divide Field by Field Length FIELD 5 SETTING 1) Read the label to divide field by a specified terminating string. 2) Read the Hexadecimal Value label on page 58 for the desired character string. 3) Read the Validate label on the same page to complete this setting. Serial Command 0571 Select Field Terminating String Serial Command 0568 Serial Command 0569 Include String Discard String 1) Read the label to divide field by field length. 2) Read the Decimal Value label on page 57 for the desired field length. 3) Read the Validate label on the same page to complete this setting. Serial Command 0570 Divide Field by Field Length 6.2.5 ADDITIONAL FIELDS 1) Read the label to specify an additional field, one at a time. 2) Read the Hexadecimal Value label on page 58 for the desired additional field. 3) Read the Validate label on the same page to complete this setting. Serial Command 0572 Serial Command 0573 Serial Command 0574 Additional Field 1 Additional Field 2 Serial Command 0575 Additional Field 3 Additional Field 4 55 Update Scanner Configuration SmartScan Manual Serial Command 0576 Additional Field 5 6.2.6 FIELD TRANSMISSION SEQUENCE 1) Read the Start label to begin with programming the field transmission sequence. 2) Program the transmission sequence by reading the desired fields as well as additional fields. 3) Read the End label on the same page to complete this setting. Serial Command 0577 Serial Command 9901 Start (Programming) Serial Command 9902 Field 1 Field 3 Field 5 Field 2 Serial Command 9904 Field 4 Serial Command 9906 Field 6 Serial Command 9908 Additional Field 1 Additional Field 2 Serial Command 9910 Additional Field 3 Additional Field 4 Additional Field 5 End (Programming) Serial Command 9903 Serial Command 9905 Serial Command 9907 Serial Command 9909 Serial Command 9911 Serial Command 9994 56 End Format Programming Appendix I NUMERAL SYSTEMS DECIMAL SYSTEM DECIMAL Serial Command 9900 Serial Command 9902 Serial Command 9904 Serial Command 9906 Serial Command 9908 0 2 4 6 Serial Command 9901 1 Serial Command 9903 3 Serial Command 9905 5 Serial Command 9907 7 Serial Command 9909 8 9 VALIDATE THE VALUES Serial Command 9994 Validate 57 Update Scanner Configuration SmartScan Manual HEXADECIMAL SYSTEM HEXADECIMAL Serial Command 9900 Serial Command 9902 Serial Command 9904 Serial Command 9906 Serial Command 9908 Serial Command 9910 Serial Command 9912 Serial Command 9914 0 2 4 6 8 A C Serial Command 9901 1 Serial Command 9903 3 Serial Command 9905 5 Serial Command 9907 7 Serial Command 9909 9 Serial Command 9911 B Serial Command 9913 D Serial Command 9915 E F VALIDATE THE VALUES Serial Command 9994 58 Validate Enter Setup KEYBOARD WEDGE TABLE & ASCII TABLE Appendix II KEYBOARD WEDGE TABLE 1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 ESC Exec CR*
0 INS DLT Home End Up Down Left BS HT LF Right PgUp CR PgDn F1 2 SP
3 0 1 2 3 4 5 6 7 8 9
4
A B C D E F G H I J K L M N O 5 P Q R S T U V W X Y Z
_ 0 1 2 3 4 5 6 7 8 9 A B C D E F Note: (1) ~: Digits of numeric keypad.
(2) CR*/Send/ENTER*: ENTER key on the numeric keypad. 6
a b c d e f g h i j k l m n o 8
ENTER*
7 p q r s t u v w x y z
Dly KEY TYPE Serial Command 9926 Serial Command 9936
<Normal>
Scan Code Note: If "Keyboard Wedge" is configured for interface, Key Type and Key Status will then become applicable. 59 Scanner Configuration SmartScan Manual KEY STATUS Serial Command 9930 Serial Command 9932 Serial Command 9934 Serial Command 9931 Add Shift Add Left Ctrl Serial Command 9933 Add Left Alt Add Right Ctrl Add Right Alt Note: Decide whether or not to apply Key Status when Normal Key is selected for Key Type. ASCII TABLE 0 SOH STX ETX EOT ENQ ACK BEL BS HT LF VT FF CR SO SI 1 DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 2 SP
3 0 1 2 3 4 5 6 7 8 9
4
A B C D E F G H I J K L M N O 5 P Q R S T U V W X Y Z
_ 6
a b c d e f g h i j k l m n o 7 p q r s t u v w x y z
DEL 0 1 2 3 4 5 6 7 8 9 A B C D E F 60 Appendix III HOST SERIAL COMMANDS SERIAL COMMANDS
#@nnnn<CR>
Purpose Remarks To configure the scanner. nnnn the four digits of command parameters. For example, 9952 is to list the current Code ID settings. 0x23 + 0x40 + 0x39 + 0x39 + 0x35 + 0x32 + 0x0d To halt the scanner. 0x23 + 0x40 + 0x2d + 0x2d + 0x2d + 0x2d + 0x0d To resume operation. 0x23 + 0x40 + 0x2e + 0x2e + 0x2e + 0x2e + 0x0d To respond with a beep. 0x23 + 0x40 + 0x2f + 0x2f + 0x2f + 0x2f + 0x0d
#@ - - - -<CR>
Purpose Remarks
#@ . <CR>
Purpose Remarks
#@////<CR>
Purpose Remarks EXAMPLE Send the serial commands via RS-232 interface or Bluetooth SPP. For example, run HyperTerminal on the host computer.
For the scanner to change the buzzer frequency to 2 kHz and beep
#@0048<CR>
#@////<CR>
For the scanner to change the buzzer frequency to 8 kHz and beep
#@0046<CR>
#@////<CR>
61 Scanner Configuration SmartScan Manual
For the scanner to change the buzzer frequency to 4 kHz and beep
#@0047<CR>
#@////<CR>
For the scanner to change the buzzer frequency to 1 kHz and beep
#@0049<CR>
#@////<CR>
62 Appendix IV UPGRADING FIRMWARE HOW TO UPGRADE 1166/1266 FIRMWARE You can only upgrade firmware of one scanner at a time. You must remove the battery of each of the rest scanners when there is more than one scanner connected to your computer, either via (1) the 3666 cradle or (2) the 3667 cradle or any generic Bluetooth dongle. Note: In case it fails downloading due to low battery, make sure the targe scanner is loaded with a fully charged battery. USING 3666 1) Connect the power supply cord from the 3666 cradle to a proper power outlet. 2) Connect the serial cable between the 3666 cradle and your computer via the RS-232 port. 3) Refer to section 1.5 for the target scanner to set connection with the 3666 cradle. Read the Set Connection label first, and then the Serial Number label within 5 seconds. Both labels can be located at the bottom of the cradle. 4) Read the following labels in sequence to configure the scanner to use RS-232 as output interface. Enter Setup Activate RS-232 Interface 115200 bps Update 5) Read the following labels in sequence for the scanner to enter the download mode. The scanner will respond with beeps to indicate it is ready for downloading. 63 Scanner Configuration SmartScan Manual Enter Setup Download 6) Run the download utility ProLoad.exe or Download.exe on your computer.
(Download.exe requires version 2.3 or later!) Open the firmware update 1x66-xx.shx, and select the correct COM port.
Baud rate
Data bit
Parity
Flow control 115,200 bps 8 None None 7) The scanner will automatically restart itself when upgrading firmware is completed successfully. USING 3667 OR GENERIC DONGLE 1) Connect the 3667 cradle or any Bluetooth dongle to your computer via the USB port. 2) Refer to section 1.6.1 for the target scanner to establish a connection with your computer via the 3667 cradle or a dongle. Read the following labels in sequence to configure the scanner to use Bluetooth Serial Port as output interface. Enter Setup Activate Bluetooth SPP (and read labels for PIN code) Update 3) Same as steps 5 ~ 7 above. 64 Appendix IV Upgrading Firmware HOW TO UPGRADE 3666 FIRMWARE 1) Connect the power supply cord from the 3666 cradle to a proper power outlet. 2) Connect the serial cable between the 3666 cradle and your computer via the RS-232 port. 3) Refer to section 1.5 for a scanner to set connection with the 3666 cradle. Read the Set Connection label first, and then the Serial Number label within 5 seconds. Both labels can be located at the bottom of the cradle. 4) Read the following labels in sequence for the 3666 cradle to enter the download mode. The LED of the cradle will be flashing red and green to indicate it is ready for downloading. Enter Setup 3666 Download 5) Run the download utility ProgLoad.exe or Download.exe on your computer.
(Download.exe requires version 2.3 or later!) Open the firmware update 3666*.shx, and select the correct COM port.
Baud rate
Data bit
Parity
Flow control 38,400 bps 8 None None 6) The 3666 cradle will automatically restart itself when upgrading firmware is completed successfully. 7) Read the Update label for the scanner to resume its operation (exit the configuration mode). Update FIND OUT FIRMWARE VERSION OF 3666 1) Connect the power supply cord from the 3666 cradle to a proper power outlet. 2) Connect the serial cable between the 3666 cradle and your computer via the RS-232 port. 3) Refer to section 1.5 for a scanner to set connection with the 3666 cradle. Read the Set Connection label first, and then the Serial Number label within 5 seconds. Both labels can be located at the bottom of the cradle. 65 Scanner Configuration SmartScan Manual 4) If RS-232 is selected for output interface, run HypterTerminal and read the following labels in sequence for the scanner to get the firmware version of the 3666 cradle. If Keyboard Wedge or USB HID is selected for output interface, run WordPad instead. Enter Setup Version 5) The current version information of the 3666 cradle will be displayed. For example, Version = V1.06 Oct 01 2003 SN: SW3000014 6) Read the Update label for the scanner to resume its operation (exit the configuration mode). Update 66 Scanner Configuration SmartScan Manual 4) If RS-232 is selected for output interface, run HypterTerminal and read the following labels in sequence for the scanner to get the firmware version of the 3666 cradle. If Keyboard Wedge or USB HID is selected for output interface, run WordPad instead. Enter Setup Version 5) The current version information of the 3666 cradle will be displayed. For example, Version = V1.06 Oct 01 2003 SN: SW3000014 6) Read the Update label for the scanner to resume its operation (exit the configuration mode). Update 66
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-12-08 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2008-12-08
|
||||
1 | Applicant's complete, legal business name |
CipherLab Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0015617624
|
||||
1 | Physical Address |
12F, 333, Dunhua S.Rd., Sec.2, Taipei, Taiwan
|
||||
1 |
Taipei, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
Q3N
|
||||
1 | Equipment Product Code |
11662
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H******** J********
|
||||
1 | Title |
R & D Engineer
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
h******@cipherlab.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Barcode Scanner | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compliance Certification Services Inc.
|
||||
1 | Name |
K**** C****
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
k******@ccsrf.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 28 | 2402.00000000 | 2480.00000000 | 0.0007800 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC