all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 |
|
User Manual | Users Manual | 5.04 MiB | ||||
1 2 3 4 5 | Attestation Statements | |||||||
1 2 3 4 5 | Cover Letter(s) | |||||||
1 2 3 4 5 | Cover Letter(s) | |||||||
1 2 3 4 5 | External Photos | |||||||
1 2 3 4 5 | Internal Photos | |||||||
1 2 3 4 5 | ID Label/Location Info | |||||||
1 2 3 4 5 | ID Label/Location Info | |||||||
1 2 3 4 5 | RF Exposure Info | |||||||
1 2 3 4 5 | RF Exposure Info | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Setup Photos |
1 2 3 4 5 | User Manual | Users Manual | 5.04 MiB |
Windows Embedded Handheld 6.5 Computer 9200 / 9200C Version 0.8 Copyright 2013 CIPHERLAB CO., LTD. All rights reserved The software is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development this information may change without notice. The information and intellectual property contained herein is confidential between CIPHERLAB and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find any problems in the documentation, please report them to us in writing. CIPHERLAB does not warrant that this document is error-free. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of CIPHERLAB CO., LTD. For product consultancy and technical support, please contact your local sales representative. Also, you may visit our web site for more information. The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD. All brand, product and service, and trademark names are the property of their registered owners. The editorial use of these names is for identification as well as to the benefit of the owners, with no intention of infringement. CIPHERLAB CO., LTD. Website: http://www.CipherLab.com IMPORTANT NOTICES FOR USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FOR CANADA This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled
"Digital Apparatus," ICES-003 of Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe B prescrites dans la norme sur le material brouilleur:
"Appareils Numeriques," NMB-003 edictee par l'Industrie. FOR PRODUCT WITH LASER CAUTION This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not stare into beam. SPECIFIC ABSORPTION RATE (SAR) INFORMATION 1.FCC SAR Value USA ( 1g ) : body position is 0.23 W/Kg and head position is 1.14 W/Kg 2. CE SAR Value CE (10g) : Body-Worn ( 1.5 cm Gap) is 0.184 W/Kg SAFETY PRECAUTIONS RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The use of any batteries or charging devices, which are not originally sold or manufactured by CipherLab, will void your warranty and may cause damage to human body or the product itself.
DO NOT disassemble, incinerate or short circuit the battery.
DO NOT expose the scanner or the battery to any flammable sources.
For green-environment issue, it's important that batteries should be recycled in a proper way.
Under no circumstances, internal components are self-serviceable. CARE & MAINTENANCE
This mobile computer is intended for industrial use. The mobile computer is rated IP65, however, damage may be done to the mobile computer if it is exposed to extreme temperatures or soaked in water.
When the body of the mobile computer gets dirty, use a clean, wet cloth to wipe off dust and debris. DO NOT use bleaches or cleaners.
Use a clean, non-abrasive, lint-free cloth to wipe dust off the LCD touch screen. DO NOT use any pointed or sharp objects against the surface. Always keep the LCD dry.
If you want to put away the mobile computer for a period of time, download the collected data to a host computer, and then remove the battery pack from the mobile computers battery compartment. Store the mobile computer and battery pack separately.
If you encounter malfunction on the mobile computer, write down the specific scenario and consult your local sales representative.
Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
- EN 60950-1: 2001
- EN 60950-1/A1: 2010
- EN 60950-1/A11: 2009
- EN 60950-1/A12: 2011 Safety of Information Technology Equipment
- EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
- EN 62311: 2008 / Article 3(1)(a) and Article 2 2006/95/EC) Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified))
- EN 50360: 2001+A1: 2012 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz)
- EN 62209-1: 2006 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Human models, instrumentation, and procedures -
Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close 13 proximity to the ear (frequency range of 300 MHz to 3 GHz)
- EN 62209-2: 2010 Human exposure to radio frequency fields from handheld and bodymounted wireless communication devices Human models, instrumentation, and procedures
- EN 300 330-2 V1.5.1: 2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);
Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods
- EN 300 330-1 V1.7.1: 2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);
Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods
- EN 300 440-1 V1.6.1: 2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part1: Technical characteristics and test methods
- EN 300 440-2 V1.4.1: 2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
- EN 300 328 V1.7.1: 2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
- EN 301 893 V1.6.1: 2011 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
- EN 301 908-1 V5.2.1: 2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive
- EN 301 511 V9.0.2: 2003 Global System for Mobile communications (GSM); Harmonized standard for mobile stations in the GSM 900 and DCS 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC)
- EN 301 489-1 V1.9.2: 2008 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements
- EN 301 489-3 V1.4.1 2002 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz
- EN 301 489-7 V1.3.1: 2005 ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment ad services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems
(GSM and DCS)
- EN 301 489-17 V2.2.1: 2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
- EN 301 489-24 V1.5.1: 2010 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment 0560
[Jmno vrobce] tmto prohlauje, e tento [typ zazen] je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede [fabrikantens navn] erklrer herved, at flgende udstyr [udstyrets typebetegnelse]
overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [Name des Herstellers], dass sich das Gert [Gertetyp] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tp = type of equipment] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
[name of manufacturer] [type of equipment]
1999/5/. Par la prsente [nom du fabricant] dclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o [name of manufacturer / izgatavotja nosaukums] deklar, ka [type of equipment / iekrtas tips] atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. iuo [manufacturer name] deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulrott, [gyrt neve] nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym [nazwa producenta] owiadcza, e [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Nome do fabricante] declara que este [tipo de equipamento] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE.
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES.
[Meno vrobcu] tmto vyhlasuje, e [typ zariadenia] spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint]
tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG.
esky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English Espaol
[Spanish]
[Greek]
Franais
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuvi
[Lithuanian]
Nederlands
[Dutch]
Malti
[Maltese]
Magyar
[Hungarian]
Polski
[Polish]
Portugus
[Portuguese]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
Svenska
[Swedish]
RELEASE NOTES Version Date 0.8 Aug 22, 2013 Draft release Notes CONTENTS IMPORTANT NOTICES ................................................................................- 3 -
For USA .............................................................................................. - 3 -
For Canada.......................................................................................... - 3 -
For Product with Laser ........................................................................... - 4 -
Specific Absorption Rate (SAR) information................................................... - 4 -
Safety Precautions................................................................................. - 4 -
Care & Maintenance............................................................................... - 4 -
RELEASE NOTES.......................................................................................- 6 -
INTRODUCTION........................................................................................... 1 Features.................................................................................................2 Inside the Package ....................................................................................2 Accessories .............................................................................................2 1.1. QUICK START ............................................................................................. 3 Overview ................................................................................................3 Installing Battery...................................................................................5 Inserting SIM Card..................................................................................6 Using Memory Card ................................................................................7 Power On/Off Mobile Computer .................................................................8 Connecting Headset ...............................................................................8 Charging & Communication ..........................................................................9 Using Wireless Networks ..........................................................................9 Using Snap-on Cable ............................................................................. 10 Using Cradle ...................................................................................... 11 USING THE 9200 MOBILE COMPUTER ...............................................................13 Battery............................................................................... 14 Battery Status Indications ........................................................ 15 Power Management................................................................ 16 Memory .............................................................................. 17 Caution of Data Loss............................................................... 17 Check Storage Space .............................................................. 17 Keypad............................................................................... 18 Keypad Settings .................................................................... 19 Alpha Key............................................................................ 20 Shift Key............................................................................. 20 Function Key ........................................................................ 21 Programmable Keys................................................................ 21 Touch Screen ....................................................................... 22 Adjust LCD Backlight .............................................................. 22 Screen Settings ..................................................................... 23 1.3.1. 1.3.2. 1.3.3. 1.3.4. 1.3.5. 1.1.1. 1.1.2. 1.4.1. 1.4.2. 1.2.1. 1.2.2. 1.4. 1.2. 1.3. 1.4.3. 1.5. 1.5.1. 1.5.2. 1.5.3. 1.6. 1.6.1. 1.6.2. 1.6.3. 1.7. 1.8. Calibration .......................................................................... 24 Notifications ........................................................................ 25 Status LED........................................................................... 25 Audio................................................................................. 25 Vibrator.............................................................................. 27 Data Capture........................................................................ 28 Barcode Reader .................................................................... 28 RFID Reader......................................................................... 28 Digital Camera...................................................................... 28 Snap-on Charging & Communication Cable .................................... 29 Charging & Communication Cradle.............................................. 30 2.1. 2.4. 2.2. 2.3. 2.1.1. 2.1.2. 2.1.3. 2.1.4. 2.1.5. 2.3.1. 2.3.2. 2.3.3. 2.3.4. 2.3.5. LEARNING WINDOWS EMBEDDED HANDHELD BASICS ............................................31 Getting Started..................................................................... 32 Home Screen........................................................................ 32 Title Bar ............................................................................. 33 Title Bar Drop-down List.......................................................... 34 Start Screen......................................................................... 36 Device Lock ......................................................................... 39 Input Methods ...................................................................... 40 Managing Programs ................................................................ 41 Add a Program to Start Screen................................................... 41 Create a New Folder............................................................... 41 Switch Between Active Programs................................................ 41 End a Program ...................................................................... 42 Find a File ........................................................................... 43 Using ActiveSync ................................................................... 44 Synchronization with Your Computer........................................... 44 Add/Remove Programs............................................................ 45 Explore Device...................................................................... 47 Suspend & Reset ................................................................... 48 Suspension .......................................................................... 48 Hardware Reset (Cold Boot)...................................................... 49 CONFIGURING 9200 MOBILE COMPUTER ...........................................................51 CipherLab Smart Shell............................................................. 52 Exit CipherLab Smart Shell ....................................................... 54 Settings .............................................................................. 56 Connections......................................................................... 58 Personal ............................................................................. 60 System ............................................................................... 61 Device Name........................................................................ 65 Change Device Name .............................................................. 65 Update OS Image................................................................... 66 3.2.1. 3.2.2. 3.2.3. 2.4.1. 2.4.2. 2.4.3. 2.5.1. 2.5.2. 3.1.1. 3.3.1. 2.5. 3.1. 3.4. 3.2. 3.3. 4.1. USING 802.11 RADIO...................................................................................69 Wi-Fi Power ......................................................................... 70 Launch SCU ......................................................................... 70 Status Tabbed Page................................................................ 71 4.1.1. 4.1.2. 5.1. 5.1.1. 5.2. 5.3. 4.1.3. 4.1.4. Configuration Tabbed Page....................................................... 72 Diagnostics Tabbed Page ......................................................... 87 USING BLUETOOTH.....................................................................................95 Bluetooth Power ................................................................... 96 Power On BT via Wireless Manager.............................................. 96 Search Devices ..................................................................... 98 Pair Devices........................................................................100 Pair ..................................................................................100 Unpair...............................................................................102 Serial Port Service ................................................................103 Object Push via Beam ............................................................107 Send a File .........................................................................107 Receive a File......................................................................108 ActiveSync via Bluetooth ........................................................109 5.3.1. 5.3.2. 5.5.1. 5.5.2. 5.4. 5.5. 5.6. 6.1. 6.2. 6.1.1. 6.1.2. 6.2.1. 6.2.2. 6.2.3. USING THE PHONE.................................................................................... 111 Phone Power.......................................................................112 Power On Phone via Wireless Manager ........................................112 SIM Card Missing...................................................................114 Phone Application.................................................................115 Phone Interface ...................................................................115 Buttons .............................................................................116 Volume..............................................................................116 Phone Settings.....................................................................118 Making Phone Calls ...............................................................122 Dial a Number .....................................................................122 Make a Call.........................................................................123 Answer a Call ......................................................................124 Configuring GPRS Network.......................................................127 6.4.1. 6.4.2. 6.4.3. 6.3. 6.4. 6.5. 7.1. 7.2. 7.2.1. 7.2.2. 7.2.3. 7.2.4. 7.2.5. 7.2.6. 7.2.7. 7.2.8. 7.2.9. USING READER CONFIGURATION UTILITY........................................................ 131 Launch Reader Configuration ...................................................132 Configure Reader Settings .......................................................133 Barcode Reader ...................................................................133 RFID Reader........................................................................137 Mifare Key..........................................................................139 Data Output........................................................................141 Notifications .......................................................................143 Reset to Default...................................................................144 Auto-start Reader Configuration ...............................................144 Symbology Settings ...............................................................145 About................................................................................146 USING CAMERA ........................................................................................ 147 Camera Interface .................................................................148 Taking a Picture...................................................................149 Shooting a Video ..................................................................151 8.1. 8.2. 8.3. 9.3. 9.1. 9.2. 8.4. 8.5. 9.3.1. 9.3.2. 9.2.1. 9.2.2. 8.5.1. 8.5.2. 8.5.3. Camera Settings...................................................................153 Pictures & Videos .................................................................155 View an Image .....................................................................155 Playback a Video ..................................................................157 Advanced Settings ................................................................158 MORE APPLICATIONS................................................................................. 161 GPS Receiver.......................................................................162 Button Assignment ................................................................163 Reassign Physical Keys ...........................................................163 Reset Physical Keys to Default..................................................165 Mobile Ghost .......................................................................166 Create Backup Image.............................................................167 Restore Backup Image............................................................168 Time Sync Utility..................................................................170 Signature Utility...................................................................172 Capturing a Signature ............................................................176 Viewing a Signature...............................................................178 Changing Signature Settings.....................................................179 SPECIFICATIONS....................................................................................... 181 Platform, Processor & Memory ...................................................................181 Communication & Data Capture..................................................................181 Electrical Characteristics..........................................................................182 Physical Characteristics ...........................................................................182 Environmental Characteristics....................................................................183 Programming Support ..............................................................................183 Accessories ..........................................................................................184 9.5.1. 9.5.2. 9.5.3. 9.4. 9.5. SCAN ENGINE SETTINGS ............................................................................. 185 Symbologies Supported ............................................................................186 RFID Tags Supported ...............................................................................188 CCD (SM1) .............................................................................................. 189 Symbology Settings.................................................................................189 LASER (SE955) ........................................................................................ 193 Symbology Settings.................................................................................193 Miscellaneous ....................................................................................198 AIM Code ID Code Characters................................................................198 AIM Code ID Modifier Characters............................................................198 2D IMAGER (SE4500DL).............................................................................. 203 Symbology Settings.................................................................................203 1D Symbologies ..................................................................................203 2D Symbologies ..................................................................................210 Miscellaneous ....................................................................................211 HF RFID READER ...................................................................................... 213 RFID Tag Default Block ............................................................................213 INTRODUCTION The 9200 Mobile Computer, powered by Windows Embedded Handheld 6.5, is light-weight, easy to use, and provides more powerful and handy tools to delivering flexibility in customization. Specifically designed to work as an industrial PDA, the 9200 Mobile Computer provides rich options of data collection, voice and data communication, long-lasting working hours, and so on. Its large color transflective/transmissive TFT display guarantees ease in reading in all lighting conditions. Integrated with Bluetooth and 802.11b/g technologies, you may choose to include a GSM/GPRS module to gain greater speeds and optimal mobility. In particular, an integrated GPS receiver is made available for use with third-party location-based applications. This manual serves to guide you through how to install, configure, and operate the mobile computer. The Care & Maintenance section is specifically crucial for those who are in charge of taking care of the mobile computer. We recommend you to keep one copy of the manual at hand for quick reference or maintenance purposes. To avoid any improper disposal or operation, please read the manual thoroughly before use. Thank you for choosing CipherLab products!
1 9200 Mobile Computer Reference Manual FEATURES
Built tough to survive drop test and sealed against moisture/dust to industrial standard IP65
Microsoft Windows Embedded Handheld 6.5 operating system with a powerful Qualcomm MSM7225-1 528 MHz processor
512 MB NAND flash memory to store OS and software programs
256 MB SDRAM to store and run programs, as well as store program data
One microSD expansion slot for memory card up to 4GB, and SDHC is supported up to 32GB
Three reader options CCD, 1D laser scanner or 2D imager
Built-in 3.0 Megapixel CMOS digital camera with white LED for flash and auto focus
Self-definable ambidextrous side triggers
Total wireless solution connectivity includes Bluetooth, 802.11b/g and GSM/EDGE/
UMTS/HSPA
A 2.8 color transflective or transmissive TFT display delivering excellent visibility in all lighting conditions
Programmable feedback including speaker and vibrator
Built-in tools including scan engine setting tool Reader Configuration, Mobile Ghost, Button Assignment utility, etc.
Supports Mirror Browser, Application Generator utility tools
Accessories and peripherals include Snap-on Cable, Cradle, etc. INSIDE THE PACKAGE The following items are included in the kit package. Save the box and packaging material for future use in case you need to store or ship the mobile computer.
9200 Mobile Computer
Rechargeable Li-ion battery pack
Stylus
Snap-on Cable (USB or RS-232)
Hand Strap
AC Power Adaptor
LCD Protective Film
Product CD
Quick Guide ACCESSORIES
Protective Cover
Spare Rechargeable Battery Pack
Snap-on Cable (USB or RS-232)
Charging & Communication Cradle 2 QUICK START OVERVIEW No. Description 1 Receiver 3 5 7 9 Touch Screen Side Triggers, user-definable Scan Key, user-definable Battery Cover 4 6 8 10 No. Description 2 Status LEDs for scanner good read (left) and battery charging (right) Volume Buttons Power Key Reset Button Battery Cover Latch 3 Charging and Communication Port 12 14 Digital Camera 16 18 Stylus Slot Application Key, user-definable 9200 Mobile Computer Reference Manual Speaker 11 13 Microphone 15 17 Headset Jack Scanning Window 4 Quick Start INSTALLING BATTERY For shipping and storage purposes, the mobile computer and the main battery are saved in separate packages. Note: Any improper handling may reduce the battery life. 1. 2. 3. 4. 5. Push down the clip on top of the battery cover to unlock it. Lift up and remove the battery cover. Insert the battery pack into the battery compartment at a proper angle (30~45) with the battery contact pins facing to the right. Press the battery down into place. Make sure that the battery is snugly fit into the compartment. Replace the battery cover. Fix the lower end first, then pull down the clip on top and press battery cover in until a click is heard. Lock battery cover by pushing up the clip. Warning:
(1)
(2) Check that the clip on top of the battery cover is at the lock position before powering on the device. For initial use, insert a charged battery, secure the battery cover in place, then press the Power key to power on the mobile computer. 5 9200 Mobile Computer Reference Manual INSERTING SIM CARD Inserting Card 1. 2. 3. 4. Push down the clip on top of the battery cover to unlock it. Remove the battery cover as well as the battery. Insert SIM card into the SIM card slot as the icon engraved in the battery compartment shows. Push SIM card to lock it in. Replace the battery cover. Fix the lower end first, then pull down the clip on top and press battery cover in until a click is heard. Lock battery cover by pushing up the clip. Removing Card 1. 2. 3. 4. Push down the clip on top of the battery cover to unlock it. Remove the battery cover as well as the battery. Push the SIM card. It will be ejected automatically for removal. Replace the battery cover. Fix the lower end first, then pull down the clip on top and press battery cover in until a click is heard. Lock battery cover by pushing up the clip. 6 USING MEMORY CARD The micoSD card slot is located at the top of the battery compartment. Quick Start Inserting Card 1. 2. 3. 4. Push down the clip on top of the battery cover to unlock it. Remove the battery cover as well as the battery. Insert memory card into the micoSD card slot as the icon engraved in the battery compartment shows. Push microSD card to lock it in. Replace the battery cover. Fix the lower end first, then pull down the clip on top and press battery cover in until a click is heard. Lock battery cover by pushing up the clip. Removing Card 1. 2. 3. 4. Push down the clip on top of the battery cover to unlock it. Remove the battery cover as well as the battery. Push the memory card. It will be ejected automatically for removal. Replace the battery cover. Fix the lower end first, then pull down the clip on top and press battery cover in until a click is heard. Lock battery cover by pushing up the clip. Note: We suggest using Toshiba and SanDisk class 4 card types. 7 9200 Mobile Computer Reference Manual POWER ON/OFF MOBILE COMPUTER POWER ON To power on the mobile computer, press and hold the power button upper right of the keypad. The mobile computer opens to show the Home Screen. located on the Note: For the mobile computer to power on, the battery cover must be secured in place. POWER OFF To power off the mobile computer, press and hold the power button for more than three seconds. A menu will appear on-screen to allow selection between restart and power off. Make sure all user data and tasks have been stored before tapping Power off. Tap to power off the mobile computer CONNECTING HEADSET The headset jack is located on the left side of the mobile computer. You can use the headset for audio playback or communication via the phone application, audio instant messaging, etc. 1. 2. 3. Flip up the rubber cover. Connect the headset to the headset jack. Replace the rubber cover. Note: Make sure you use a headset that follows the CTIA standard. 8 Quick Start CHARGING & COMMUNICATION The main battery may not be charged to full for shipment. When you first receive the kit package, you will need to charge the main battery to full before using the mobile computer. You may use the Snap-on Cable or Charging & Communication Cradle along with a power adapter to charge the mobile computer. Charging Time
Main battery: It takes approximately 4 hours to charge an empty battery to full. The charging LED above the screen (located on the right) will light up in red while charging and will turn green when charging is done. When the main battery is removed, RTC retention will be maintained. Charging Temperature
It is recommended to charge the battery at room temperature (18C to 25C) for optimal performance.
Battery charging stops when the temperature drops below 0C or exceeds 45C. Operation on Battery Power
When 802.11b/g, GSM/GPRS, and Bluetooth are all enabled on battery power, the main battery charge will drop down substantially.
In order to prevent system shut down after the battery is drained out, we suggest that you keep a fresh battery for replacement at all times or connect the mobile computer to an external power. USING WIRELESS NETWORKS The mobile computer supports widely applied wireless technologies, Bluetooth and 802.11b/g, and is able to send/receive data in real time in an efficient way. Select GSM/GPRS modules embedded for a total wireless solution for data and voice communication. 9 9200 Mobile Computer Reference Manual USING SNAP-ON CABLE 1. 2. 3. 4. Fasten the Snap-on Charging and Communication Cable to the lower end of the mobile computer. Insert the adapter DC plug into the power jack on the Snap-on Cable. Connect one end of the power cord to the adaptor, and the other end to an electrical outlet. (Use power cord suitable for your country.) The charging LED (left) on the mobile computer lights red while charging. The LED will turn green when charging is completed. If necessary, connect the USB/RS-232 end of the cable to your PC for data transmission. Note: You may connect the Snap-on Cable to your PC for simultaneous data communication and charging. Status Red, solid Green, solid Description Charging the mobile computer Charging complete 9200 LED Indicator Charging 10 Quick Start USING CRADLE 1. 2. 3. 4. Seat the mobile computer on the Charging and Communication Cradle. Insert the adapter DC plug into the power jack on the back of the Cradle. Connect one end of the power cord to the adaptor, and the other end to an electrical outlet. (Use power cord suitable for your country.) The charging LED (left) on the mobile computer lights red while charging. The LED will turn green when charging is completed. If necessary, connect the Cradle and your PC with the USB cable provided for data transmission. Note: You may connect the Charging & Communication Cradle to your PC for simultaneous data communication and charging. 9200 LED Indicator Charging Status Red, solid Green, solid Red, blinking (2s:2s) Description Charging the mobile computer Charging complete Charging error 11 9200 Mobile Computer Reference Manual 12 Chapter 1 USING THE 9200 MOBILE COMPUTER This chapter explains the features and usage of the mobile computer. IN THIS CHAPTER 1.1Battery..................................................................... 14 1.2Memory .................................................................... 17 1.3Keypad..................................................................... 18 1.4Touch Screen ............................................................ 22 1.5Notifications .............................................................. 25 1.6Data Capture............................................................. 28 13 9200 Mobile Computer Reference Manual 1.1. BATTERY
Main Battery The mobile computer is powered by a rechargeable 3.7 V/3300mAh Li-ion battery pack, and it takes approximately 4 hours to charge it to full from the power adaptor or approx. 8 hours using the Snap-on Cable (at 500mA). However, the charging time may vary by working condition.
Spare Battery A spare battery is provided as an accessory. We recommend keeping a fully charged spare battery at hand in order to replace the main battery when it is nearly drained out. Warning:
(1) The battery cover must be secured in position. If not, the mobile computer cannot turn on by pressing the power key or wake up by pressing the scan key. For a new battery, make sure it is fully charged before using. Always prepare a spare battery pack, especially when you are on the road.
(2) 14 Chapter 1 Using the 9200 Mobile Computer 1.1.1. BATTERY STATUS INDICATIONS The battery pack is the only power source for the mobile computer to work. Therefore, when the main battery level goes low, you need to replace the battery pack with a charged one or charge it as soon as possible. Most of all, you should backup important data on a regular basis. By looking at the battery status icon, you can tell the battery level remaining in the main battery the more the white bars, the more power in the main battery. Tap the top of the screen to expand the title bar pull-down list, and then tap the battery icon to quickly access the Power Settings. Refer to Title Bar Drop-down List. Alternatively, you may go to Start Screen | Settings, and tap Power. Battery Icon Description External power source is connected and main battery is charging. Main battery level is 80% ~ 100%. Main battery level is 60% ~ 79%. Main battery level is 40% ~ 59%. Main battery level is 20% ~ 39%. Main battery level is very low (0% ~ 19%) and needs charging immediately. Note: When the mobile computer is fully charged and battery level reaches 100%, the battery icon will change from to
. Warning:
(1) Once the battery charge drops below 20%, the low battery notification will be displayed on the screen.
(2) Data loss may occur with RAM during low battery condition. Always save data before battery runs out of power or keep a fresh battery for replacement. Constant usage of the mobile computer at low battery level can affect battery life. For maximum performance, recharge the battery periodically to avoid battery drain out and maintain good battery health.
(3) 15 9200 Mobile Computer Reference Manual 1.1.2. POWER MANAGEMENT For any portable device, power management is a critical issue especially when you are on the road. Below are some tips to help you save battery power. Warning:
Using backlight, wireless connectivity, and peripheral devices while on battery power will substantially reduce battery power.
Bring a second battery pack on the road.
End wireless connections such as Bluetooth, 802.11b/g or GSM/GPRS which are not in use.
Shorten the Backlight turn off time, go to Start Screen | Settings | System, and tap Screen Backlight. Refer to Adjust LCD Backlight.
Disable key light function, go to Start Screen | Settings | System, and tap Keypad Backlight to select Always Off to disable keypad Backlight function.
Go to Start Screen | Settings, and tap Power. In the Battery tab, you may monitor the charging status. In the Advanced tab, you may specify automatic turn-off times for the mobile computer to conserve power. When the screen is turned off, the system is in standby mode, meaning it is ready for use but not in use. 16 Chapter 1 Using the 9200 Mobile Computer 1.2. MEMORY
Flash Memory (ROM) 512 MB flash memory for storing OS (Windows Embedded Handheld 6.5) and custom application programs. Yet a portion of the memory is referred to as Flash Disk (folder), which can store data and programs that you wish to retain even after hardware reset.
Random-access Memory (RAM) 256 MB RAM for storing and running programs, as well as storing program data.
Expansion Slot The mobile computer is equipped with one microSD card slot, which is user accessible. High capacity memory card (microSDHC) is supported. 1.2.1. CAUTION OF DATA LOSS When the main battery is removed or drained, only the contents of RTC will be retained. All other unsaved data will be lost. To prevent this situation, always save your data and pay attention to remaining battery level. If you want to put away the mobile computer for a couple of days, you should be aware that data loss occurs when the main battery discharges completely. Therefore, it is necessary to backup data and files before putting away the mobile computer!
1.2.2. CHECK STORAGE SPACE Go to Start Screen | Settings | System, and tap Memory. It displays the current capacity and usage of the onboard RAM.
Storage memory refers to the memory allocated for file and data storage.
Program memory refers to the memory allocated for running programs. Also, it provides information on the Flash Disk folder or storage card. The Flash Disk folder is part of the onboard 512 MB flash memory. Because the flash memory is non-volatile, data or programs stored in this folder will not be erased after hardware reset. 17 9200 Mobile Computer Reference Manual 1.3. KEYPAD The Alphanumeric keypad includes alphanumeric, call/end keys, navigation keys, function keys, and so on. This keypad is set to numeric mode by default. Shift key Alpha key Function key 18 Chapter 1 Using the 9200 Mobile Computer 1.3.1. KEYPAD SETTINGS Go to Start Screen | Settings | System, and tap Keypad Backlight to configure related settings. The keypad backlight is set to be automatically turned on for 5 seconds when any key is pressed. Alternatively you may have it always turned off or turned on instead. It is suggested to turn on the keypad backlight while working in a dark area; however, using backlight while on battery power will substantially reduce battery power. 19 Note:
(1)
(2) 1.3.3. SHIFT KEY Status Icon
9200 Mobile Computer Reference Manual 1.3.2. ALPHA KEY This alphanumeric keypad is set to numeric mode by default. The Alpha key [] serves as a switch key between numeric and alpha (lower-case alphabetic) input modes. Note: Press [] key to switch between numeric and lower-case alphabetic modes. The alpha icon will appear on the status bar with a sequence as shown below. Status Icon Alpha Key
Input Mode Numbers Press [] one time Lower-case alphabetic characters mode, use the Shift key [] to enter ALPHA (upper-case alphabetic) Under character (
If you are using the on-screen keyboard, tap CAP (Caps Lock) to switch upper-case and lower-case alphabetic modes.
) mode. or Shift Key Press [] one time Input Mode The Shift key [] modifies the next key pressed depending on the input mode.
(1) In numeric mode (
pressed.
), it will modify the next key
(2) In alpha (lower-case alphabetic) mode (
), it will show a single upper-case character after pressing Shift key [] one time. For example, input ABC, it will show Abc. Pressing Shift key [] two times will lock the present input mode.
(1) In numeric mode (
), it will lock numeric mode.
(2) In alpha (lower-case alphabetic) mode (
lock upper-case alphabetic mode (= Caps Lock). For example, input ABC, it will show ABC.
), it will
Press [] two times
(enter Shift Lock Mode)
Note: It is not necessary to long press the Shift key []. 20 Chapter 1 Using the 9200 Mobile Computer 1.3.4. FUNCTION KEY The Function key [Fn] serves as a specified key, and the functionality of each key combination is application-dependent. 1) To enable this special key, press [Fn] on the keypad. Its icon status bar. will appear on the 2) Now press another key to get the value of key combination (say, press [1] to get the value of F1). 3) To get the value of another key combination specified by the function key, repeat step 2. 4) To disable the special key function, press [Fn] again, and the icon will go off. Note: It is not necessary to long press the [Fn] key. The default [Fn] key combinations are defined as below:
Key Combination
[Fn], [1] = F1
[Fn], [2] = F2
[Fn], [3] = F3
[Fn], [4] = F4
[Fn], [5] = F5
[Fn], [6] = F6
[Fn], [7] = F7
[Fn], [8] = F8
[Fn], [9] = F9
[Fn], [0] = F10 Action Softkey 1 Softkey 2 Talk Minimize current active window n/a Volume Up Volume Down
Record Note: Press the [Fn] key first, and then press the second key for a specific function. 1.3.5. PROGRAMMABLE KEYS The following keys are user-definable. They can be defined to serve as another key or to serve as a shortcut to launch a specific program. See Button Assignment utility for more details.
Two side triggers
Application key
[-] (Hyphen key)
[.] (Period key) 21 9200 Mobile Computer Reference Manual 1.4. TOUCH SCREEN The mobile computer comes with a 2.8 TFT graphic LCD, 240 by 320 pixels resolution
(QVGA). The LED backlight of screen, which helps ease reading under dim environments, can be controlled manually and automatically. Warning:
Using backlight while on battery power will substantially reduce battery power. It is suggested to dim the backlight while working in a well-lit area or automatically turn off the mobile computer when not in use. 1.4.1. ADJUST LCD BACKLIGHT Go to Start Screen | Settings | System, and tap Screen Backlight to configure related settings. In the Backlight/External Power configuration screen, you can select the Turn off backlight if device is not used for check box to disable the backlight function, and select the time from the related drop-down list to control the backlight disabled time. You can also set the backlight brightness by dragging the slider to the right (for brightness increase) or left (for brightness decrease). 22 Chapter 1 Using the 9200 Mobile Computer 1.4.2. SCREEN SETTINGS The LCD is also a touch screen that can be calibrated through screen alignment. Go to Start Screen | Settings | System, and tap Screen to configure related settings. You may re-calibrate the touch screen, smooth the font edges or adjust the text size displayed on the screen if necessary. Warning:
DO NOT use any pointed or sharp objects to move against the surface of the screen. 23 9200 Mobile Computer Reference Manual 1.4.3. CALIBRATION The mobile computers touchscreen needs to be calibrated after a period of use to ensure its accuracy. Calibration will align a set of coordinates on the touch panel and LCD underneath. Tap Settings | System | Screen to open the Alignment tabbed page. Tap Align Screen to start touchscreen calibration. Use the stylus to tap the crosshairs one by one to perform calibration. When calibration is completed, the alignment screen will close. 24 Chapter 1 Using the 9200 Mobile Computer 1.5. NOTIFICATIONS 1.5.1. STATUS LED Two LED indicators located above the touch screen provide information about charging status, scanner light beam, and scanner "Good Read" during data collection. LED Indicators Charging Left Status Green, solid Red, solid Description Charging complete Charging the mobile computer Red, solid for 8 sec, then flashing Charging error battery not in place)
(for instance, Scanner decode Green, flash once Good read Right Scanner beam Orange, on while scan key is pressed Scanner laser beam sent out Note: For Scanner decode and Scanner beam LED to function, LED notification must be enabled in Reader Configuration. See Enable LED Notification. 1.5.2. AUDIO The speaker is used to play sounds for events in Windows and programs, or play audio files such as .WAV files. In addition, it can be programmed for status feedback. In noisy environments, you may consider connecting a CTIA headset instead. A headset jack is provided on the left side of the mobile computer, which is a 3.5 mm DIA stereo earphone jack. The mobile computer also supports using Bluetooth headsets. Go to Start Screen | Settings, and tap Sounds & Notifications to configure related settings. 25 9200 Mobile Computer Reference Manual 26 Chapter 1 Using the 9200 Mobile Computer 1.5.3. VIBRATOR The mobile computer is integrated with a vibrator, which is software programmable for tactile feedback. This can be helpful when working in noisy environments. Tap the top of the screen to invoke the title bar drop-down list, and then tap the volume setting icon to change the system volume or phone ringing volume. You may mute it or have it set to vibrate instead. Note: You may switch the volume settings between On, Vibrate and Off in the Volume control screen. The volume adjustment slider bar is only available for adjustment in volume On mode. 27 9200 Mobile Computer Reference Manual 1.6. DATA CAPTURE 1.6.1. BARCODE READER A selection of scan engines is available for delivering flexibility to meet different requirements. Depending on the scan engine integrated, the mobile computer is capable of scanning barcodes of a number of symbologies that are enabled by default while running the ReaderConfig.exe utility. If you need to scan barcodes that are encoded in a different symbology, enable the symbology first. 1.6.2. RFID READER By selection, the mobile computer provides an RFID reader for decoding RFID tags. To ready the mobile computer to read such tags, select the RFID label in the Reader Configuration Utility. 1.6.3. DIGITAL CAMERA An integrated 3.0 megapixel CMOS camera in the mobile computer is specifically designed for collecting image data. We provide an image capture utility that is specifically designed to turn on the camera and capture images. 28 Chapter 1 Using the 9200 Mobile Computer 1.7. SNAP-ON CHARGING & COMMUNICATION CABLE The Snap-on Charging & Communication Cable provides a convenient way to charge your mobile computer and also connect it to your PC.
Slide and click to attach; press release buttons and pull to detach
Connects the mobile computer and PC through USB or RS-232
Provides DC adapter jack on cable for charging the mobile computer
Completes charging in approximately 8 hours
LED on mobile computer shows charging status
Adapter input 100-240VAC, 50/60Hz; output 5VDC/4A 29 9200 Mobile Computer Reference Manual 1.8. CHARGING & COMMUNICATION CRADLE The Charging & Communication Cradle charges your mobile computer and a spare battery at the same time. You may also use the cradle for data transmission between your PC.
Presents charging compartment for mobile computer and spare battery
Provides microUSB socket on the back for data transmission with PC
Supports USB Host Mode via a USB OTG cable
Provides DC adapter jack on the back for charging the mobile computer
Completes charging in approximately 4 hours
Front LED shows charging status for mobile computer
Side LED shows charging status for spare battery
Adapter input 100-240VAC, 50/60Hz; output 5VDC/3.3A 30 Chapter 2 LEARNING WINDOWS EMBEDDED HANDHELD BASICS This chapter mainly describes the basic skills to work with the 9200 Mobile Computer. The add-on utilities for applications regarding data collection, processing, and transmission, are introduced in the following chapters. The mobile computer is specifically designed for real-time data collection in the Windows Embedded Handheld 6.5 environment. It won't take long for any Windows user to get familiarized with it. Keep these basic skills in mind and explore this Windows Embedded Handheld device at ease.
Tap an item to select it.
Tap and hold an item to see a menu that enables tasks, such as cut, copy, rename, delete, etc.
Tap at the bottom of the screen to close an active window, a dialog box, or a running application.
Tap at the bottom of the screen to save the current settings and exit the application (or minimize the window in some applications).
Tap at the bottom of the screen to return the previous menu.
Tap
at the bottom of the screen to open the Start Screen. IN THIS CHAPTER 2.1Getting Started.......................................................... 32 2.2Input Methods ........................................................... 40 2.3 Managing Programs ................................................... 41 2.4Using ActiveSync ....................................................... 44 2.5Suspend & Reset........................................................ 48 31 9200 Mobile Computer Reference Manual 2.1. GETTING STARTED 2.1.1. HOME SCREEN When the mobile computer is fully charged, press the Power key for three seconds to turn on the mobile computer and wait for the Home Screen to come up. Scroll the Home Screen up and down to highlight a desired application. The additional information or items will appear sideways, and softkey bar will be available at the bottom of the screen as well. Title Bar Application Icon Application Info. Softkey bar If you are using the mobile computer for the first time, there are a couple of things to do after the Home Screen comes up. The Getting Started wizard will walk you through e-mail setup, changing the background image, etc.
Go to Start Screen | Settings, and tap Home to change theme, background, and status items shown on the Home Screen, etc.
Go to Start Screen | Settings, and tap Clock & Alarms to select time zone, change local time, set alarms, etc. 32 Chapter 2 Learning Windows Embedded Handheld Basics 2.1.2. TITLE BAR The icons at the top of the screen are explained below. Icon
. Description External power source is connected. Battery power remaining: more bars indicate more power in the battery. Keypad is in default numeric mode or alphabetic mode. Shift [] is enabled in numeric mode/numeric lock mode. Shift [] is enabled in alpha mode/alpha lock mode. Function mode is enabled. Volume status: On, off, or vibrate. SIM card is missing. You can still make emergency calls if your service provider supports it. GPRS service available. GPRS connection is established. EDGE service available. EDGE connection is established. UMTS (3G) service available. UMTS (3G) connection is established. HSPA service available. HSPA connection is established. Incoming call. Missed call. Antenna signal status: Phone power off. Antenna signal status: PIN Code required for powering on the Phone. Antenna signal status: phone power on; the more bars, the stronger the signal. Connection is active. Wi-Fi Network is detected (but not connected). Wi-Fi Network is connected. Reminder for an alarm or appointment is active. Receiving Bluetooth beams. System notification icon. E-mail/text message is received. Roaming. 33 9200 Mobile Computer Reference Manual 2.1.3. TITLE BAR DROP-DOWN LIST The title bar drop-down list is hidden at the top of the screen, and can be expanded by tapping the title bar:
Tap the title bar to reveal the drop-down list. Drag the drop-down list to left or right to view all the icons. Icon Description Tap it to zoom in or zoom out of current view. Tap it to check the connections status. You may configure the settings through Wireless Manager. Tap it to check the phone status. You may configure the settings through Wireless Manager. Tap it to show detected networks for Wireless local area networking (WLAN) connection, which is not available until Wi-Fi power is turned on through Wireless Manager. Tap it to change the system volume. You may mute it or have it set as vibrate instead. Tap it to monitor the charging status and change the power scheme. Tap it to change the clock and alarms settings. Tap it to submit customer feedback to Microsoft for improving Windows Embedded Handheld software. Tap it to view the reminder for an alarm or appointment. 34 Chapter 2 Learning Windows Embedded Handheld Basics Tap it to receive incoming Bluetooth beams. Bluetooth A2DP profile is in use. Tap it to access the Bluetooth devices list. Tap it to view a missed call. Tap it to check a new e-mail. Tap it to check a new voicemail. Tap it to send an SMS text message. Speakerphone is on. Tap it to access the Bluetooth configuration. Tap it to configure ActiveSync connection settings. Roaming is on. 35 9200 Mobile Computer Reference Manual 2.1.4. START SCREEN Tap useful utilities developed by CipherLab, or configure system settings. to open the Start Screen. You can tap to access application programs and The icons provided on the Start Screen are depicted as follows:
Icon Name Home (Today) Description Opens the Home Screen. Phone Text Launches the mobile computers phone. Sends SMS text messages. E-mail Writes and sends emails. Contacts CipherLab Utilities List all of your contacts, including e-mail and instant messenger contacts; similar to the phone book on a cell phone. This folder contains more CipherLab-developed applications that are preinstalled on the mobile computer and which strengthen the users system management. 36 Chapter 2 Learning Windows Embedded Handheld Basics Internet Explorer Browses world wide web. Wireless Manager Quick sets the power for phone, Bluetooth and Wi-Fi, and opens each of the settings pages. Calendar Creates and manages events, meetings, and appointments. Settings Accesses system settings. Getting Started Opens Getting Started application to set OS basic features. Pictures & Videos Views pictures and plays videos downloaded, copied or taken with the built-in camera. Camera Takes pictures and shoots videos. Windows Media Plays audio/video files. Marketplace Not available; Marketplace for Mobile service was terminated on 22nd May 2012. Messenger Provides IM service. Windows Live Accesses Windows Live services (such as Hotmail) or searches world wide web. MSN Weather Checks the weather of your locale and other parts of the world. Calculator Performs mathematical calculations. Notes Tasks Creates notes by typing on the physical keypad or on-screen keypad. Creates, tracks, and manages tasks. 37 9200 Mobile Computer Reference Manual Adobe Reader LE Browses PDF files. File Explorer Browses and manages the files on local storage. ActiveSync Synchronizes Microsoft Office Outlook data between the mobile computer and another Windows-based computer. Internet Sharing Shares the mobile computers mobile data connection with another computer through a USB or RS-232 cable. Task Manager Monitors the active applications and CPU/memory usage on the mobile computer. Search Phone Searches contacts, files and other data on the mobile computer. Help Accesses OS online help. Remote Mobile Alarms Bing Desktop Connects to a remote computer. Opens Clock & Alarms application to:
Set date, time, time zone for your locale.
Set and manage alarms. Opens search engine.
Confirmation for service agreement is needed before first use. MSN Money Checks stocks. Games Opens Windows Embedded Handheld games. 38 Chapter 2 Learning Windows Embedded Handheld Basics 2.1.5. DEVICE LOCK By default, the device is unlocked. You may lock the mobile computer to prevent unintended operation. When locked, it will not respond to screen touch or keypad input until it is unlocked again. However, on the Lock screen you can still monitor the device status on the title bar. If the Lock screen is enabled, the Volume adjustment keys on the left side will be unavailable. Lock 9200 Open Start Screen, and tap the lock icon computer. on the softkey bar to protect your mobile Password Lock You may further apply password protection to block unauthorized access. Go to Start Screen | Settings, and tap Lock.
Simple PIN: Set up a password (4-digit at least)
Strong alphanumeric: Set up a strong password (7-character at least) Unlock 9200 Drag the lock slide to left or right of the unlock screen. Note: For the Simple PIN password to Lock screen, the password can not be a sequence of numerals (e.g. 1111 or 1234), and cannot contain uppercase/lowercase letters or punctuation. Tap to lock device. Device is locked 39 9200 Mobile Computer Reference Manual 2.2. INPUT METHODS The keyboard icon
(SIP). Tap the icon to show or hide the on-screen keyboard. at the middle bottom of the screen is for Software Input Panel Data entry can be performed by the following methods. Physical Keypad Type with the physical keypad on the mobile computer. Data Capture Scan barcode in applications, e.g. Notes, Reader Config, etc. Software Keypad Type or write using SIP (Soft Input Panel):
Tap the SIP button on middle softkey bar to show or hide the input panel. 40 Chapter 2 Learning Windows Embedded Handheld Basics 2.3. MANAGING PROGRAMS Tap the Start button to open the Start Screen. Tap a program to launch it. To add a new program or subfolder to the Start Screen, you can either use File Explorer on the mobile computer or ActiveSync on your PC. See Using ActiveSync for how to operate via ActiveSync. Warning:
To avoid making any changes to the program configurations by accident, we recommend you to use Copy and Paste Shortcut rather than Cut and Paste. 2.3.1. ADD A PROGRAM TO START SCREEN 1. 2. 3. 4. 5. 6. Tap Start Screen | File Explorer. Navigate to find the program of interest. Tap and hold the program and select Copy from the pop-up menu. Navigate to the Programs folder My Device\Windows\Start Menu\Programs. Tap and hold any blank spot on the screen and select Paste Shortcut from the pop-up menu. The new program will be added to the Programs folder. Open Start Screen. The newly added program will appear now. 2.3.2. CREATE A NEW FOLDER 1. 2. 3. Tap Start Screen | File Explorer. Navigate to the location which you would like to create a new folder. Tap Menu | New Folder and a subfolder will be created. OR Tap and hold any blank spot on the screen and select New Folder in the pop-up menu. 2.3.3. SWITCH BETWEEN ACTIVE PROGRAMS 1. 2. 3. Tap Start Screen | Task Manager. Select which running program to use. Tap Menu | Switch To and the program will be maximized on-screen OR Tap and hold the program of interest and select Switch To in the pop-up menu. 41 9200 Mobile Computer Reference Manual 2.3.4. END A PROGRAM In general, the system manages memory automatically, and there is no need to exit a program in order to open another or to conserve memory. However, random access memory (RAM) may be used up when too many programs are running simultaneously. As a result, it will slow down system operation or cause program errors. In this case, you should exit one or more of the running programs to release memory. In order to use memory in a more efficient way, you are recommended to exit a program once it is no longer in use. Warning:
Always remember to save data or settings before you exit a program. Tap to close an active window, a dialog box, or a running application. Tap to save the current settings and exit the application (or minimize the window in some applications). If the button is not displayed on the softkey bar, press OK on the physical keypad. Note: Some programs come with an associated icon on the softkey bar. You may tap the icon and tap End Task to end the active program. 1. 2. 3. Tap Start Screen | Task Manager. Select a running program to stop. Tap End Task on the softkey bar and the program will be closed. 42 Chapter 2 Learning Windows Embedded Handheld Basics 2.3.5. FIND A FILE 1. 2. Tap Start Screen | Search Phone. In the Search for box, enter the file name, keyword, or other information you want to search for. If you have searched for this item before, tap the drop-down list and select it. In the Type box, select a data type to help minimize your search. If the data type of your file is other than listed, you may try Larger than 64 KB. However, if the target file is less than 64 KB, it will not be searchable. Tap Search. In the Results list, tap the item you would like to open. 3. 4. 43 9200 Mobile Computer Reference Manual 2.4. USING ACTIVESYNC Microsofts syncing tools enables users to update or back up the data on their handheld devices to desktop computers. Two syncing tools are featured by Microsoft - ActiveSync and Windows Mobile Device Center (WMDC). Which tool to use depends on which OS is running on your PC:
O.S. Syncing Program Windows Vista, Windows 7, Windows 8 WMDC Windows XP SP3 or earlier ActiveSync ActiveSync and WMDC are downloadable from Microsofts website. Download and install the right one on your PC. Before syncing your PC and device, make sure your PC has the appropriate syncing tool installed. Hereafter in this manual, we will focus on ActiveSync only. For WMDC usage, see its documentation or help file. 2.4.1. SYNCHRONIZATION WITH YOUR COMPUTER 1. 2. 3. Follow these instructions for initial ActiveSync operation:
Connect the mobile computer and your PC with the Snap-on Cable or Cradle. Turn on the mobile computer. Your computer will automatically detect the USB device. Select which partnership to set up. If you want to synchronize data between the mobile computer and your personal computer, select Standard Partnership;
otherwise, select Guest Partnership 4. Wait a few seconds for the mobile computer to get connected (and synchronized if a Standard Partnership is selected). Note: For ActiveSync via Bluetooth, refer to Using Bluetooth. 44 Chapter 2 Learning Windows Embedded Handheld Basics 2.4.2. ADD/REMOVE PROGRAMS On your PC, open ActiveSync and click Tools | Add/Remove Programs to install a program that is designed to be used on a mobile device running Windows Embedded Handheld. If a previously installed user program is no longer desired, you may also remove it from the system. 45 9200 Mobile Computer Reference Manual Aside from using the Add/Remove Programs menu option to manage programs, you can also install and remove programs by copying and pasting the installation file (or executable file) to the location of interest. Alternative for Installing New Programs (Copy & Paste) Follow these steps to install a new program manually. 1. 2. 3. Establish USB connection between your mobile computer and your PC. On your PC, open ActiveSync and click Explore on the taskbar. Navigate to the target folder, e.g. the Programs folder (\Windows\Start Menu\
Programs), depending on where you wish to access the program. Navigate through file folders on your computer to find the new program
(.CAB, .EXE, etc.) Right-click the program and select Copy from the pop-up menu. Re-open the target folder in step 3. Right-click anywhere blank and select Paste from the pop-up menu. On the mobile computer, tap the pasted file to start installation or execute the application. 4. 5. 6. 7. Alternative for Removing Programs Follow these steps to uninstall a program manually. 1. 2. 3. 4. Go to Start Screen | Settings | System and select Remove Programs. Tap the name of the program that you want to delete. Tap Remove. Tap Yes to uninstall the program. Note: If the program does not appear in the list of installed programs, you may use File Explorer to locate it. Tap and hold the program to select Delete from the pop-up menu. 46 Chapter 2 Learning Windows Embedded Handheld Basics 2.4.3. EXPLORE DEVICE Add a Program to Start Screen 1. 2. Establish USB connection between your mobile computer and your PC. On your PC, open ActiveSync and click Explore on the taskbar. 3. 4. 5. 6. 7. 8. Navigate through file folders to find the program you desire. Right-click the program and select Create Shortcut from the pop-up menu. Right-click the shortcut and select Cut from the pop-up menu. Navigate to the Programs folder \Windows\Start Menu\Programs. Right-click anywhere blank on the window and select Paste from the pop-up menu. The new program will be added to the Programs folder. On the mobile computer, go to Start Screen and the new program will appear now. Note: Create Shortcut, Cut, and Paste: The same result can be performed by Copy and Paste Shortcut. Create a New Folder 1. 2. 3. 4. Establish USB connection between your mobile computer and your PC. On your PC, open ActiveSync and click Explore on the taskbar. Navigate to the target folder where you wish to create a new folder. Right-click anywhere blank on the window and select New Folder from the pop-up menu. A subfolder will be created. 47 9200 Mobile Computer Reference Manual 2.5. SUSPEND & RESET 2.5.1. SUSPENSION The mobile computer operates continuously once it is powered on. To minimize power consumption, suspend the mobile computer if you are not actively using it. When the mobile computer enters suspension, the system is in a power-saving status and can be quickly awoken to operate as needed. Enter Suspension Press the Power key for about 0.2 seconds to enter suspension. Resume from Suspension Press the Power key for about 0.2 seconds to awake the mobile computer. Alternatively, you may press the Scan key. Warning:
To save battery power, it is suggested that the mobile computer is set to be automatically suspended when not in use. Refer to Power Management for more information about saving power. 48 Chapter 2 Learning Windows Embedded Handheld Basics 2.5.2. HARDWARE RESET (COLD BOOT) When the mobile computer runs slower than normal or when it stops responding to input, reset it with a hardware reset, also known as cold boot. This will restart the mobile computer and initialize RAM. All data cached in RAM will be gone after hardware reset, while flash memory and RTC will be retained. Hardware Reset (= Cold Boot)
Method 1 1. Press and hold down the power key for more than 3 seconds until a menu shows allowing selection between restart and power off. 2. Tap Restart. The mobile computer will power off and then turn on again to show the Home Screen. OR
Method 2 1. Using the stylus, poke the reset button to restart the device. 2. The mobile computer will power off and then turn on again to show the Home Screen. Warning:
(1) Data loss may occur if files are not properly saved before hardware reset.
(2) Pressing the power key and selecting Restart (Method 1) is the recommended method for performing hardware reset. Perform Method 2 only when Method 1 is not effective. Perform hardware reset only on the occasion when one or more applications on the mobile computer are misbehaving, and the system fails to respond.
(3) 49 9200 Mobile Computer Reference Manual 50 Chapter 3 CONFIGURING 9200 MOBILE COMPUTER In this chapter, a brief on the system settings is provided for your reference. IN THIS CHAPTER 3.1 CipherLab Smart Shell ................................................ 52 3.2Settings.................................................................... 56 3.3Device Name ............................................................. 65 Tap to open the Start Screen, and tap Settings to configure related settings. 51 9200 Mobile Computer Reference Manual 3.1. CIPHERLAB SMART SHELL CipherLab Smart Shell is an optional OS interface that features a Home Screen and a set of screen views with programs and services arranged based on their properties. By switching between 3D carousel view or tiles view, you can easily access commonly used programs and settings, or manage your tasks, calendar, and contacts. You can also adjust screen views to fit your preferences by customizing screen layout and items displayed. When installed, the mobile computer will enter CipherLab Smart Shell when the system is powered on. Home Screen Slide left to show tasks Slide left to show calendar 52 Chapter 3 Configuring 9200 Mobile Computer Icon Description Tap it for a 3D carousel view. Provide a fast and convenient way to access your favorite or recently used items and services. Tap to close any launched programs, or switch to a running program. Supports settings and layout change based on the view opened on-screen. Tap it to switch Bluetooth mode (invisible or discoverable). Tap it to enable/disable Wi-Fi. Tap it to enable/disable GSM/GPRS. Flight Mode: Tap it to disable all wireless signals. The icon color will change from white to red. 53 9200 Mobile Computer Reference Manual 3.1.1. EXIT CIPHERLAB SMART SHELL If you would like to exit Smart Shell and return to the built-in OS interface, follow the steps below:
1. Tap the Launcher icon on the Smart Shell homepage. 2. Tap the Settings icon to open the system settings page. 54 Chapter 3 Configuring 9200 Mobile Computer 3. Tap the Sbp Mobile Shell icon to open Smart Shell Settings. 4. Tap the Settings icon Tap Exit Shell to exit Smart Shell and show the OS Home Screen. seated on the lower right of the screen. 55 9200 Mobile Computer Reference Manual 3.2. SETTINGS Tap Start Screen | Settings to access the settings menu for configuring system time, layout, sounds and notifications, power, wireless connection, and more. Bluetooth Refer to Using Bluetooth. Clock & Alarms
Time tab: Change the date, time and time zone settings. By default, the time zone settings will be automatically synchronized and updated by notification.
Alarms tab: You may set up at most three alarms to wake you up or as a reminder. Refer to Home Screen.
Appearance tab: Customize the theme and background of the Home Screen.
Items tab: Select items that will appear on the Home Screen, and configure Home Screen timeout. Home Lock Tap it to apply password protection to limit access to the mobile computer, and any screen or keypad input will be blocked. Refer to Device Lock.
Battery tab: You may view the current charge of main battery.
Advanced tab: You may configure to turn off the device when it is idle for a specific Power 56 Chapter 3 Configuring 9200 Mobile Computer period of time, either on battery or external power. Sounds & Notifications Refer to Note: For Scanner decode and Scanner beam LED to function, LED notification must be enabled in Reader Configuration. See 198HEnable LED Notification. Audio.
Sounds tab: Configure sounds for specific actions, events, programs, etc.
Notifications tab: Select to play sounds as notifications for some events. Connections Refer to Connections. Personal Refer to Personal. Refer to System. System 57 9200 Mobile Computer Reference Manual 3.2.1. CONNECTIONS Go to Start Screen | Settings | Connections. Beam Tap it to receive incoming Bluetooth beams. Connections Refer to Configuring GPRS Network. Domain Enroll Connects to an SCMDM server with an enrollment ID and password, allowing company deployment on multiple mobile computers. Mobile Network Wizard Select to automatically configure your network provider and APN when a SIM card is inserted.
Actual settings depend on the network provider. GPRS settings can also be manually configured under Settings | Connections | Connections. 58 Chapter 3 Configuring 9200 Mobile Computer Wi-Fi Refer to Using 802.11 Radio. Wireless Manager Tap it to enable/disable the Wi-Fi, Bluetooth or Phone Power. For related information, refer to ! , Power On BT via Wireless Manager and Power On Phone via Wireless Manager. 59 9200 Mobile Computer Reference Manual 3.2.2. PERSONAL Go to Start Screen | Settings | Personal. Buttons
Tap it to adjust the character input repeat delay and rate, move the slider to right or left for repeat speed. Owner Information
Identification tab: Enter your contact information.
Notes tab: Enter your notes.
Refer to Using the Phone. Phone 60 Chapter 3 Configuring 9200 Mobile Computer 3.2.3. SYSTEM Go to Start Screen | Settings | System. About
Version tab: Displays information of OS software, processor, etc.
Device ID tab: Enter a name and description for identifying the mobile computer.
Copyrights tab: Displays important statements on copyrights. Button Assignment
Redefines key functions under keypads normal and function mode. See Button Assignment for more details. Certificates View or modify digital certificates that some applications use to establish trust for secure connections. Clean Boot Allows clean boot of the mobile computer, which eliminates all user data and restores the mobile computer back to factory settings.
A confirmation key is required for clean boot.
A warning message will show asking for confirmation before the mobile computer re-boots and starts the clean boot process.
Make sure you have completed data backup to an external storage before performing clean boot.
It is recommended to have the mobile computer connected to an external power source when performing clean boot. 61 9200 Mobile Computer Reference Manual Customer Feedback Sends customer feedback to Microsoft for improving Windows Embedded Handheld software. Encryption Encrypts files stored on the SD card. The encrypted files can only be read on the mobile computer. Error Reporting Determines whether to enable error reporting to help Microsoft improve Windows Embedded Handheld software. By default, it will automatically collect errors and report to Microsoft. External GPS
Programs tab: Specify a program port for multiple GPS-enabled programs to access GPS data.
Hardware tab: For the GPS program port to work, you must specify the correct hardware port. For example, if you are using the GPS receiver integrated on the mobile computer, select COM 7 and 4800 for baud rate.
Access tab: By default, Windows Embedded Handheld manages access to your GPS receiver and allows multiple programs to obtain GPS data simultaneously. If you clear the check box, some programs may not be able to obtain GPS data. GPS Manager
AGPS tab: Select to enable AGPS function to improve GPS performance.
Ephemeris tab: Configure how to download ephemeris data, or tap Download to update ephemeris at any time. The data is valid for seven days according to the system date and time. The date of last download will be displayed at the lower left of the screen. Keypad Backlight Change keypad backlight behavior. By default, the keypad backlight will be automatically turned off for five seconds when any key is pressed. Managed Programs Manages programs that are installed in RAM. Memory
Main tab: View the current capacity and usage of the onboard RAM, which is divided into file storage and program usage.
Storage Card tab: View memory usage of the Flash Disk folder or storage card. Reader Configuration
CipherLabs scanning utility which allows configuration of symbology, scan settings, and output and notification settings. 62 Chapter 3 Configuring 9200 Mobile Computer Regional Settings
Region tab: Customize the appearance and formatting to your geographic region.
Number tab: Customize the number format.
Currency tab: Customize the currency format.
Time tab: Customize the time format.
Date tab: Customize the date format. Remove Programs Removes programs that are stored in RAM. Screen
Alignment tab: Align the screen for calibration.
ClearType tab: Apply Clear Type fonts.
Text Size tab: Use the slider to adjust the text size. Screen Backlight
Battery Power tab: Configure when to turn on/off the backlight and brightness of the LCD backlight when on battery power.
External Power tab: Configure when to turn on/off the backlight and brightness of the LCD backlight when on external power. System Information Displays important device information for software package, hardware modules, and manufacture info. Task Manager Lists all applications which are currently running on the mobile computer. Tap and hold an application to switch to it or end it if processing too many applications takes up a lot of memory or CPU resource. Time Synchronization Synchronizes the mobile computers system time via two methods, SNTP and GPS.
SNTP tab: Manually synchronizes the mobile computers time with an NTP server. Synchronized time will be written to RTC and system time will be updated.
GPS tab: Gets time information through GPS data packet. USB Connection Sets USB connection between ActiveSync and Mass Storage when the mobile computer is connected to a Windows-based PC.
ActiveSync: Synchronizes the mobile computer and PC through ActiveSync connection. This is the default setting.
Mass Storage: Presents the mobile computer with an SD card installed as a storage device. If no SD card is installed, the directory on the PC will be blank. 63 9200 Mobile Computer Reference Manual USB to PC Disable this to switch USB connection from RNDIS to PPP. When the mobile computer is connected to your PC through USB connection, internet sharing to the mobile device will be enabled and ActiveSync connection might be interrupted. Disable advanced network functionality to troubleshoot ActiveSync connection problems. 64 Chapter 3 Configuring 9200 Mobile Computer 3.3. DEVICE NAME 3.3.1. CHANGE DEVICE NAME Go to Start Screen | Settings | System, and tap About to change the device name on the Device ID tab to make the device more recognizable. 65 9200 Mobile Computer Reference Manual 3.4. UPDATE OS IMAGE Upgrading the OS image helps optimize the mobile computers performance and functionality. The upgrading process relies on a memory card, and an .nb0 OS image file. 1. 2. 3. On your PC, copy the latest OS image file to the microSD card. Insert the microSD card into the card slot as described in Using Memory Card. Power on the mobile computer by pressing the power button, and at the same time press the Volume Down key on the right side of the mobile computer The mobile computer powers on and directly enters firmware upgrade mode. System upgrade with the OS image file will start automatically. An upgrade progress bar will show on-screen. Starting upgrade OS upgrading Start to upgrade firmware!
Upgrade start!!
Status :
Checking all files 50%
Upgrade start!!
Status :
Upgrading Firmware 4. 66 Chapter 3 Configuring 9200 Mobile Computer 5. When OS upgrade is complete, the mobile computer will restart. After system startup, tap the screen to enter calibration. Restart and enter Calibration Start to upgrade firmware!
OS upgrade complete 100%
Status :
Firmware updated complete. 67 9200 Mobile Computer Reference Manual 68 Chapter 4 USING 802.11 RADIO The Wi-Fi module integrated on the mobile computer lets you configure and connect to network wirelessly. IN THIS CHAPTER 4.1Wi-Fi Power............................................................... 70 69 9200 Mobile Computer Reference Manual 4.1. WI-FI POWER The mobile computer is capable of Wi-Fi, a wireless networking technology making use of an access point, also known as hotspot, to connect to a wireless local area network. To use Wi-Fi, the mobile computer has to connect to a hotspot. Some hotspots are open for connection while others request a key to authenticate access. If this is the case, the authentication key must be included in the mobile computers Wi-Fi settings. Wi-Fi settings and power are controlled via Summit Client Utility (SCU). Windows Zero Configuration (Wireless Manager) can only be used to view Wi-Fi power and connection status. Turn off Wi-Fi when it isnt used to extend battery life. SeeTurn On/Off Wi-Fi Power. Summit Client Utility functions by the use of Wi-Fi profiles. Profiles are a set of radio and security settings that are stored in the registry. You may create, rename, edit and delete profiles, as well as alter global settings that apply to every profile or to Summit Client Utility (SCU) itself. For more details on profile settings, please visit the following websites:
http://www.summitdata.com/documentation.html http://www.summitdata.com/Documents/summit_users_guide_3_03.html http://www.summitdata.com/Documents/summit_quick_start_v3_03.html 4.1.1. LAUNCH SCU Wi-Fi settings can be adjusted with Summit Client Utility. Within this application are three tabbed pages which allow users to select the access point for connection, create profiles for better management, perform diagnostics on connectivity, and fine-tune property settings to meet their individual requirements. To launch SCU:
1. On Start screen, tap Settings | System | SCU
. SCU opens showing Diagnostics. three tabbed pages: Status, Configuration, and The following sections explicate in detail the settings on each of these pages. 70 Chapter 4 Using 802.11 Radio 4.1.2. STATUS TABBED PAGE The Status tabbed page provides basic information on WLAN connection and Bluetooth status. Wi-Fi settings can be configured in Configuration Tabbed Page. Wi-Fi status Bluetooth status (service not available now) Note: SCU does not currently support viewing or configuring Bluetooth settings. 71 9200 Mobile Computer Reference Manual 4.1.3. CONFIGURATION TABBED PAGE TURN ON/OFF WI-FI POWER Select the Wi-Fi checkbox to turn on Wi-Fi power. Deselect it to shut down Wi-Fi. Turn on Wi-Fi power Note:
(1) Wi-Fi connection status will be reflected under Wireless Manager, which can be accessed by tapping the Title bar | Wireless Manager icon, or Start Screen |
Settings | Connections | Wireless Manager. When Wi-Fi power is off, the status will display as No signal. When Wi-Fi power is on but no active connection is established, the status will display as Available. When a WLAN connection is established, the status will display as Network Card. Wireless Manager cannot be used to control Wi-Fi power.
(2) SCU does not allow configuration of Bluetooth settings. To establish and manage Bluetooth connections, tap Start Screen | Settings | Bluetooth. 72 ACTIVE PROFILE Chapter 4 Using 802.11 Radio A profile is a set of parameters that define the manner which a device associates to a wireless LAN (WLAN) infrastructure. A profile contains information including the System Set Identifier (SSID, the "name" of the WLAN infrastructure), means of data encryption, authentication type, and security credentials. Select an active profile in the drop-down box on the Configuration tabbed page. To add a profile other than the Default profile, see Create Wi-Fi Profile. Tap to select an active profile in the drop-down bar 73 9200 Mobile Computer Reference Manual CREATE WI-FI PROFILE To create a Wi-Fi Profile:
1. 2. 3. Open SCU as described in Launch SCU. Tap the Configuration tab to show the Configuration tabbed page. Tap Scan to view a list of access points that are broadcasting their SSIDs. You may sort the list by tapping the column headers. Tap Refresh to update the list of available access points. Item SSID RSSI Secure Description Service Set Identifier (SSID) Received Signal Strength Indication (RSSI) Indicates whether data encryption is enabled: true or false Tap twice on any of the access points to create a new profile for it. A prompt shows confirming whether to create a profile with the identified SSID, encryption and EAP type. Tap Yes to continue. 4. 74 Chapter 4 Using 802.11 Radio 5. A profile settings page opens showing detailed radio settings. Tap each item and adjust its Value to suit your needs. 6. When finished fine-tuning all settings, tap Commit to save the profile. 7. Tap OK on the softkey bar to close Profile Settings page and return to Configuration settings. If you would like to directly activate the newly created profile, select it as the Active Profile on the Configuration settings page. 75 9200 Mobile Computer Reference Manual MANAGE WI-FI PROFILE To manage your profiles:
1. 2. Open SCUs Configuration tabbed page as described in Create Wi-Fi Profile. Tap Manage Profiles to open the Profile settings page. Item Profile it Description When SCU is first launched, Default is the active profile. Unless is modified, this profile does not specify an SSID, EAP type or encryption method. You can chose to do the following:
Modify the default profile
Tap New to add a new profile
Select an existing profile from the drop-down menu and configure 76 New Chapter 4 Using 802.11 Radio Tap New and enter a unique name for the profile. Configure the Radio settings, Encryption, EAP Type, and other settings for this new profile.
The name for each profile must be unique
You can define up to 20 profiles Delete Select a profile from the drop-down menu and tap Delete.
You cannot delete the Active Profile. Make sure the selected profile is not the active profile under Configuration tabbed page. Radio Settings After selecting a profile in the Profile drop-down bar, configure radio settings in the scrollable menu below. 77 9200 Mobile Computer Reference Manual Property Profile Name SSID Client Name Tx Power Power Save Description Tap to rename the selected profile. Up to 32 characters allowed. Service Set Identifier (SSID) for the WLAN infrastructure to which the radio will connect. If no SSID is specified, the radio will only associate to an access point that broadcasts its SSID.
Value: A string of up to 32 characters
Default: None Name assigned to the mobile computer with Summit radio installed.
Value: A string of up to 16 characters
Default: None The power of the radio in milliwats (mW). In certain cases this value will be overwritten by the access point, which will dictate to the radio which power to use.
Value: Maximum (Maximum power defined for the current regulatory domain) or a specified percentage 75%, 50%, 25%, 10%
Default: Maximum Power save mode for the radio. Set the radio to its optimum power-consumption setting.
Value:
CAM Constantly Awake Mode (CAM) keeps the radio powered up continuously so there is minimal lag in message response time. This mode consumes the most power but offers the highest 78 Chapter 4 Using 802.11 Radio throughput. It is recommended when AC power is in use. Maximum Fast It lowest throughput. In Max Power Savings (Max PSP) mode, the access point buffers incoming messages for the radio, which wakes up periodically and connects to the access point to see if any buffered messages are waiting. The radio requests buffered messages and then goes back to sleep. It conserves the most power but offers the is recommended when battery power is in use. Power Save Mode (Fast PSP) switches between the two modes described above, depending on network traffic. This mode switches to CAM when retrieving a large number of packets and switches back to PSP (= Power Save Polling) after the packets have been retrieved. It is recommended when power consumption is a concern but you need greater throughput than that allowed by Max PSP. Bit Rate Radio Mode
Default: Fast The measurement of how much data is transmitted in a given amount of time from one location to another.
Value: Auto (rate is negotiated automatically with the AP) 1, 2, 5.5, and 11 Mbps.
Default: Auto Use of 802.11a/b/g/n frequncies and data rates when interacting with an AP, or the use of ad hoc to associate to a station radio.
Value: B rates only, BG rates full, G rates only, BG LRS, A rates only, ABG rates full, BGA rates full, Ad Hoc B rates only BG rates full G rates only BG LRS All B and G rates, plus N rates if supported. 6, 9, 12, 18, 24, 36, 48, and 54 Mbps. 1, 2, 5.5, 6, 11, 24, 36, and 54 Mbps. This should only be used with Cisco APs running IOS in autonomous mode
(without controllers). 79 9200 Mobile Computer Reference Manual BGA rates full A rates only ABG rates full 6, 9, 12, 18, 24, 36, 48, and 54 Mbps, plus N rates if supported. All A rates and all B and G rates, with A rates (the 802.11a radio) preferred, plus N if supported. All B and G rates and all A rates, with B and G rates (the .11g radio) preferred, plus N rates if supported. When selected, the Summit radio associates to another station radio that is in ad hoc mode and has the same SSID and, if configured, static WEP key.
Default: ABG rates full 802.11 authentication type used when associating to an AP.
Value: Open, Shared (shared-key), LEAP Ad Hoc
(Network-EAP)
Default: Open
It is recommended that the default setting Open is selected. WPA and WPA2 support the same authentication methods and similar key management methods; the difference is mainly in area of encryption. WPA defines TKIP as the primary encryption method, while WPA2 defines AES-CCMP as the primary encryption method.
Value: None, WPA, WPA2
Default: None This specifies the type of key used to encrypt and decrypt transmitted data, and how that key is specified in the Value or derived. Select Encryption type drop-down box. Item None TKIP AES-CCMP WEP Description N/A The encryption method defined with WPA. TKIP uses RC4 encryption as does WEP. The encryption method defined with IEEE 802.11i and certified with WPA2. AES-CCMP is stronger than RC4 The encryption method defined with the original IEEE 802.11 standards; encrypts transmitted data using 64-bit or 128-bit encryption. Auth Type WPA Encryption 80 Chapter 4 Using 802.11 Radio Encryption CKIP CKIP is supported for use only with static WEP. For CKIP, encryption keys need to be defined for CKIP-EAP, encryption keys are derived dynamically from an EAP authentication. in SCU;
Authentication This is the protocol used to authenticate the device and its user if the WLAN uses the Enterprise version of Wi-Fi Protected Access (WPA) and WPA2. Select Authentication type in the Value drop-down box, then enter the credentials necessary for each type in the appeared fields. Item None LEAP EAP-FAST PEAP-MSCHAP PEAP-GTC Description N/A Credentials values for LEAP:
User Name (up to 64 characters)
Password (up to 32 characters) Credentials values for EAP-FAST
User Name (up to 64 characters)
Password (up to 32 characters)
PAC Filename (up to 32 characters): You may create a protected access credential (PAC) for each client device. When creating a PAC manually, you must store it in the directory identified in Certs Path on the Globals settings page. To use automatic provisioning, leave this field blank.
PAC Password (up to 32 characters) Credentials values for PEAP-MSCHAP, PEAP-GTC, EAP-TTLS:
User Name (up to 64 characters)
Password (up to 32 characters)
CA Cert: Filename and extension 81 9200 Mobile Computer Reference Manual EAP-TLS PEAP-TLS PSK Credentials values for EAP-TLS and PEAP-TLS:
User: Username or Domain/Username (up to 64 characters)
User Cert: Filename and extension of user certificate residing in the Microsoft certificate store. See Certificates.
CA Cert: Filename and extension of root certificate authority (CA) digital certificate (up to 32 characters). Specify the Certs Path in Globals settings page > Certs Path. Pre-shared keys (PSK) consist of up to 256 bits entered as a string of up to Fast Reauth The expedited WPA key handshake used to reduce roaming time to 125 msec or less. Available for WPA TKIP and WPA2 AES-CCMP.
Value: None, CCKM
Default: None Value Use this box to change the value of a selected item. Depending on the item property, this can be done by choosing a value from a drop-down list, or entering the desired value with the on-screen or physical keypad. Commit After making any changes on the Profile tabbed page, the Commit button must be tapped in order for the settings to take effect. 82 Chapter 4 Using 802.11 Radio MANAGE GLOBAL SETTINGS Global settings include radio and security settings that apply to all profiles in SCU. To open the Global settings page:
1. 2. 3. Open SCUs Configuration tabbed page as described in Create Wi-Fi Profile. Tap Manage Profiles to open the Profile settings page. Tap the Globals tab to open the Global settings page. Property Roam Trigger Roam Delta Roam Period BG Channel Set Value When the moving average RSSI from the current AP is weaker than Roam Trigger, radio does a roam scan where it probes for an AP with a signal that is at least Roam Delta dBm stronger.
Value (dBm): -50, -55, -60, -65, -70, -75, -80, -85, -90, Custom
Default: -70 dBm When Roam Trigger is met, a second APs signal strength (RSSI) must be Roam Delta dBm stronger than the moving average RSSI for the current AP before radio will attempt to roam to the second AP.
Value (dBm): 5, 10, 15, 20, 25, 30, 35
Default: 10 dBm After association or roam scan (with no roam), radio will collect RSSI scan data from Roam Period seconds before considering roaming.
Value (sec): 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, Custom
Default: 10 (seconds) Defines the 2.4 GHz channels to be scanned when the radio is contemplating a roam and needs to determine what APs are available. Item Description 83 9200 Mobile Computer Reference Manual Full 1, 6, 11 1, 7, 13 Custom All channels The most commonly used 2.4 GHz channels For ETSI and TELEC radios only Indicates the system registry has been edited to include a value other than those available in the drop-down value
Default: Full Indicates whether to support 5 GHz (802.11a) channels where dynamic frequency selection (DFS) is required.
Value: On, Off
Default: Off Enables determining the dwell (listen) time when passively scanning on a DFS channel.
Valid range of 20-500 ms configurable
Default: 120
When the DFS Scan Time is changed to a value lower than default, it is recommended that the beacon period in the WLAN infrastructure is changed as well. Ideally, the dwell time should be 1.5 times than that of the beacon period. The channel to be used for an ad hoc connection if the active profile has a Radio Mode value of Ad Hoc.
Value:
1~14 36, 40, 44, 48 One of the 2.4 GHz channels UNII-1 channels
Default: 1
If a channel that is not supported is selected, then SCU will automatically apply the default channel setting (1). Aggressive scanning complements and works in conjunction with the standard scanning that is configured through the Roam Trigger, Roam Delta, and Roam Period settings. It is recommended that aggressive scanning is enabled unless there is significant co-channel interference because of overlapping coverage from APs that are on the same channel.
Value: On, Off
Default: On Whether to allow the use of Cisco information element (IE) and CCX version number to authorize support for CCX features.
Value: Full, Off Full mode uses Cisco IE and CCX version number and enables support for all CCX features. Off mode disables all support for Cisco IE and CCX version number.
Default: N/A
If the radio fails to connect to an 802.11n wireless network, set CCX features as Off and try again. Whether to allow the use of Wi-Fi Multimedia (WMM) Extensions or not.
Value: On, Off
Default: Off DFS Channels DFS Scan Time Ad Hoc Channel Aggressive Scan CCX features WMM 84 Auth Server Chapter 4 Using 802.11 Radio
Changing this setting requires suspend/resume of the mobile computer to take effect. Type of authentication server being used for EAP authentication.
Value:
Type 1 Cisco Secure ACS or another server that uses PEAPv1 for PEAP with EAP-MSCHAPV2
(PEAP-MSCHAP) A different authentication server, such as Juniper Networks Steel Belted RADIUS, that uses PEAPv0 for PEAP-MSCHAP Type 2 TTLS Inner Method
Default: Type 1 Authentication method used within secure tunnel created by EAP-TTLS.
Value:
Auto-EAP MSCHAPV2 MSCHAP PAP CHAP EAP-MSCHAPV2 Any available EAP method
Default: Auto-EAP The type of Pairwise Master Key (PMK) caching to use with a WPA2 encryption type (alternative to WPA2 CCKM).
Value: Standard or OPMK (opportunistic PMK)
Default: Standard How to handle antenna diversity when transmitting data to AP.
Value:
Main Only Aux Only On Use main antenna only Use auxiliary antenna only Use diversity
Default: On How to handle antenna diversity when receiving data from AP.
Default: On-start on Main
This is a fixed setting; on startup, the main antenna is always used When packet size exceeds the set threshold, it becomes fragmented.
Value: 256 ~ 2346
Default: 2346 (bytes) When packet size exceeds the set threshold, RTS/CTS is required on link.
Value: 0 ~ 2347
Default: 2347 (bytes) PMK Caching TX Diversity RX Diversity Frag Thresh RTS Thresh 85 9200 Mobile Computer Reference Manual LED Tray Icon Admin Password Auth Timeout (s) Certs path Supplicant Auto Profile Indicates whether or not an LED is used.
Value: On, Off
Default: Off Whether to enable the system tray icon or not.
Value: On, Off
Default: On N/A Specifies how long it will wait for an EAP authentication request to succeed or fail. If authentication credentials are specified in the active profile and the authentication times out, then association will fail. If authentication credentials are not specified in the active profile and the authentication times out, then the user will be required to enter credentials again.
Value: 3 ~ 60
Default: 8 (seconds) File path where the certificate for EAP authentication is stored.
Value: A valid directory path of up to 64 characters
Default: Depends on device The user (client) making a request to gain access to system resources through the authentication server.
Value: Summit, Third Party
Default: Summit Activate or deactivate automatic profile selection.
Value: On, Off
Default: Off When On is selected, proceed to the Profile settings page and select from the existing profiles those which you would like to add to the Auto Profile list. The number of profiles in this list is limited to 19. When Auto Profile is activated, the Summit radio will attempt to associate to an access point after a device startup or resume, and it will try out each listed profile in order until the radio associates to an access point. The successful profile becomes the active profile and remains active until one of the following occurs:
The device goes through suspension and resume, power-cycling, or restart, which causes the radio to go through the automatic profile selection process once more.
Auto Profile is turned off and an active profile is manually selected on the SCU Configuration tab. 86 Chapter 4 Using 802.11 Radio 4.1.4. DIAGNOSTICS TABBED PAGE Perform diagnostic tests to troubleshoot connection issues when necessary. To open the Diagnostics page:
1. 2. Open SCU as described in Launch SCU. Tap the Diagnostics tab to show the Diagnostics page. Diagnostics status for Wi-Fi and Bluetooth shows, along with on-screen buttons to open Advanced settings and view software version information. Wi-Fi diagnostics status Bluetooth diagnostics status
(service not available now) 87 9200 Mobile Computer Reference Manual ADVANCED DIAGNOSTICS To access Advanced diagnostics settings:
1. 2. Open Diagnostics Tabbed Page. Tap the Advanced button to open advanced diagnostics settings. CHECK STATUS To check diagnostics status, select Status in the drop-down bar. Select Status to check connection details 88 Chapter 4 Using 802.11 Radio USE PING TOOLS To perform ping tests, select Ping Tools in the drop-down bar. Select Ping Tools to diagnose the connection Device IP address AP Name Item Destination Ping Payload Ping Delay Timeout ms Start Ping Description Enter the address to ping. The amount of data to be transmitted on a ping.
Value: 32, 64, 128, 256, 512, 1024
Default: 32 (bytes) The amount of time that elapses between successive ping requests.
Value: 0~7200000
Default: 1000 (milliseconds) The amount of time that elapses without a response before ping request is considered a failure.
Value: 0~30000
Default: 5000 (milliseconds) Enter the address to ping to in the Destination field and tap Start Ping. A continuous ping will begin until the following happens: Stop Ping is tapped, the, the application is exited, or the radio is removed. Activity status will be logged in the output box below. 89 9200 Mobile Computer Reference Manual Start Ping When an active ping is initiated, the screen displays a ping indicator that blinks in green (for a successful ping) or red (for an unsuccessful ping). The ping indicator is hidden when the screen is switched to a tab other than Diags or Status Release/Renew Obtain a new IP address through DHCP release/renew, and log all activity in the output area at the bottom. 90 Chapter 4 Using 802.11 Radio
(Re)connect Disable and enable the radio, apply or re-apply the current profile, attempt to associate and authenticate to the wireless network, and log all activity in the output area at the bottom. 91 9200 Mobile Computer Reference Manual USE DEBUG TOOLS To check debug settings, select Debug in the drop-down bar. Select Debug to check debug settings Item Driver Debug Reg. Domain Description Select whether to debug the WLAN driver, and the output mode for driver debug.
Value: Not set, 1-Text(Low), 2-Text, 3-Text(High), 4-Serial(Low), 5-Serial, 6-Serial(High)
Default: Not set
When set as 1-Text(Low), 2-Text, or 3-Text(High), SCU will continue to export debug logs to the mobile computers internal storage. Do not select any of these options unless necessary. Indicates the regulatory domain or domains for which the radio is configured by default. Default setting is Worldwide, which means that the radio can be used in any domain. Note: It is recommended that Driver Debug output settings are kept as default and not changed. 92 Chapter 4 Using 802.11 Radio SOFTWARE VERSION INFORMATION To check software version information:
1. 2. Open Diagnostics Tabbed Page. Tap the About button to view information about SCU version, device driver, and software developer. 93 9200 Mobile Computer Reference Manual 94 Chapter 5 USING BLUETOOTH The 9200 Mobile Computer lets you configure Bluetooth settings and manage Bluetooth services provided on remote devices. Bluetooth Profiles Supported Serial Port Profile Object Push Profile Dial-Up Networking Profile Personal Area Networking Profile Human Interface Device Profile Headset Profile Hands-Free Profile Generic Access Profile Generic Object Exchange Profile Advanced Audio Distribution Profile Audio/Video Remote Control Profile Phone Book Access Profile ActiveSync-Over-Bluetooth IN THIS CHAPTER
(SPP)
(OPP)
(DUN)
(PAN)
(HID)
(HSP)
(HFP)
(GAP)
(GEOP)
(A2DP)
(AVRCP)
(PBAP) supports Server/Client supports Server/Client supports Client only supports keyboard and mouse without cursor 5.1Bluetooth Power ........................................................ 96 5.2Search Devices .......................................................... 98 5.3Pair Devices .............................................................100 5.4 Serial Port Service ....................................................103 5.5 Object Push via Beam................................................107 5.6 ActiveSync via Bluetooth............................................109 95 9200 Mobile Computer Reference Manual 5.1. BLUETOOTH POWER 5.1.1. POWER ON BT VIA WIRELESS MANAGER 1. Go to Start Screen | Wireless Manager as shown below. 2. Tap All or Bluetooth to turn on the power. 96 3. Chapter 5 Using Bluetooth To make the mobile computer discoverable to other Bluetooth devices, tap Menu
| Bluetooth Settings | Mode tab, and check Make this device visible to other devices. Tap OK to confirm. 4. The Bluetooth status becomes Visible under Wireless Manager, meaning Bluetooth is turned on and deployment is enabled. 97 9200 Mobile Computer Reference Manual 5.2. SEARCH DEVICES 1. In the Bluetooth configurations screen, on the Devices mode tab you can search for other Bluetooth device or go to Start Screen | Settings | Bluetooth for the same settings. 2. Tap Add new deviceor Add on the softkey bar to search for other Bluetooth devices. 98 Chapter 5 Using Bluetooth 3. Wait for a few seconds, and it will list the discovered devices. If you do not see the device that you wish to connect, make sure it is set as discoverable. Tap Refresh to search again. 99 9200 Mobile Computer Reference Manual 5.3. PAIR DEVICES 5.3.1. PAIR 1. Select a device to connect and tap Next. 2. If necessary, enter the password to establish a secure connection. Make sure a consistent password is entered on both devices. Tap Next. 100 Chapter 5 Using Bluetooth 3. The two devices become connected via Bluetooth. Tap Done. 4. Once paired successfully, the device will appear in the device list. Tap it to view available Bluetooth services or modify its display name. 101 9200 Mobile Computer Reference Manual 5.3.2. UNPAIR On the Devices tab, tap and hold the desired device to select Delete from the pop-up menu. Note: The mobile computer must be unpaired on the remote device as well. Remove it from the device list on the remote device as well. (Both devices must be unpaired and removed!) 102 Chapter 5 Using Bluetooth 5.4. SERIAL PORT SERVICE 1. On the Devices tab, tap and hold the desired device to select Edit from the pop-up menu. 2. Make sure the Serial Port service is enabled for use on the remote Bluetooth device. For PC example, you can launch the Bluetooth Device configuration utility and in the Bluetooth Device configuration screen, tap COM Ports tab, tap Add as below. Select Incoming (device initiates the connection) item tap OK. 103 9200 Mobile Computer Reference Manual 3. The searched COM port will be showed on the screen, select the connected COM port then tap OK. Note: On the PC, you can use applications such as HyperTerminal to confirm the connection between your PC and mobile computer. In HyperTerminal, the COM port No. has to be set exactly as the incoming port No. on your PC. 4. On the Bluetooth configuration screen of the mobile computer, tap Refresh to select Serial Port check box, click Save. 104 Chapter 5 Using Bluetooth 5. On the COM Ports tab, tap New Outgoing Port. 6. Select the remote device, and then tap Next. 105 9200 Mobile Computer Reference Manual 7. Select a COM port, and then tap Finish. (For Bluetooth, please select COM0 or COM3 for connection. 8. A new Bluetooth serial port is created. Tap OK. The mobile computer is ready to transmit data via Bluetooth. 106 Chapter 5 Using Bluetooth 5.5. OBJECT PUSH VIA BEAM 5.5.1. SEND A FILE 1. 2. 3. Tap Start Screen | File Explorer. Navigate to the folder containing the file you wish to send to the Bluetooth device. Tap and hold the file and select Beam file from the pop-up menu. 4. Tap the remote device of interest to send the file via Bluetooth. The mobile computer will start uploading the file. The remote device will start receiving the file few seconds later. When file transfer is completed, tap OK to exit 107 9200 Mobile Computer Reference Manual 5.5.2. RECEIVE A FILE 1. 2. Pair the mobile computer will the remote device as described in Pair Devices. Tap Start Screen | Settings | Connections | Beam, and make sure Receive all incoming beams is enabled in order to receive incoming files. 3. 4. On the remote device, send a desired file to the mobile computer via Bluetooth. A Receiving Data dialog appears on-screen, first notifying that the mobile computer is receiving data, and then asking for confirmation to save the data. Tap Yes to continue. The received data will be stored under \My Device\My Documents. 108 Chapter 5 Using Bluetooth 5.6. ACTIVESYNC VIA BLUETOOTH To use Bluetooth via ActiveSync, first configure Bluetooth settings correctly on your computer first. 1. Configure Bluetooth settings for your computer, such as Turn discovery on and add a COM port (incoming), the COM port value depending on your computer. 2. 3. Pair the mobile computer with the remote computer via Bluetooth as described in Pair Devices. For Bluetooth connection to work via ActiveSync, either disconnect physically by detaching the mobile computer from the Snap-on Cable or Cradle, or uncheck the Allow USB connections option under ActiveSync | File | Connection Settings. In addition, enable COM port connection and specify the correct COM port. 109 9200 Mobile Computer Reference Manual 4. After ActiveSync service is set on the remote computer, enable ActiveSync service on the mobile computers Bluetooth partnership settings. Tap Refresh if the option does not appear in the list. 4. On the mobile computer, tap Start Screen | ActiveSync | Menu and select Connect via Bluetooth in the option menu. ActiveSync partnership will be established between the remote computer and mobile computer via Bluetooth after a few seconds. 110 Chapter 6 USING THE PHONE The 9200 Mobile Computer allows making phone calls and connecting to the network over General Packet Radio Service (GPRS). Insert the SIM card before turning on the power. Refer to Inserting SIM Card. Note: If the SIM card is not in position, you may make emergency calls if the service is supported. IN THIS CHAPTER 6.1Phone Power ............................................................112 6.2Phone Application......................................................115 6.3Phone Settings .........................................................118 6.4Making Phone Calls ...................................................122 6.5Configuring GPRS Network .........................................127 111 9200 Mobile Computer Reference Manual 6.1. PHONE POWER 6.1.1. POWER ON PHONE VIA WIRELESS MANAGER 1. Phone power is turned on by default. If not, go to Start Screen | Wireless Manager to access Wireless Manager. Wireless Manager 2. Tap All or Phone to turn on the power. 112 Chapter 6 Using the Phone 3. When the power is turned on, the Phone status appears as On, and an antenna signal icon will be displayed on the title bar. 4. Tap Menu | Phone Settings to configure related settings if necessary. Note: Phone Settings are only available when the phone power has been turned on. You can check the security settings, change the PIN code on your SIM card and so on if necessary. 113 9200 Mobile Computer Reference Manual 6.1.2. SIM CARD MISSING 1. On the Home Screen, the notification icon SIM card is missing. on the title bar shows that the 2. Tap Phone or press the [SEND] button on the physical keypad to access the phone application. If supported by your service provider, only emergency calls are allowed when a SIM card is absent. Note: If your wired headset (CTIA standard) has an integrated hook switch, press the hook switch to open the dialer screen. 114 Chapter 6 Using the Phone 6.2. PHONE APPLICATION 6.2.1. PHONE INTERFACE After the phone application is launched, the antenna signal icon on the title bar indicates whether you are connected to your service providers network. As the strength of the signal diminishes, so will the number of bars in the icon, which ranges from no signal to excellent signal (four-bars). The display panel on the top half of the screen is used to show your service providers name and the contact name and/or phone number when making or receiving a call.
Tap the scroll bar next to the display panel to browse call history, which keeps a record of the phone numbers dialed in and out, as well as missed phone calls.
Tap a contact name to view, edit the contact details, send or beam contact info, or add contact to speed dial list.
Tap the Menu button The phone keypad is displayed for telephone number input or speed dial. on the softkey bar to switch the view options. Antenna signal icon Show or hide phone keypad
Tap the button
(Hide keypad) on the softkey bar to hide the keypad.
Tap the button
(Show keypad) on the softkey bar to show the keypad. 115 9200 Mobile Computer Reference Manual 6.2.2. BUTTONS The phone keypad features the following buttons:
Button Description
[Backspace] button allows you to delete the last input.
[Speed Dial] button allows you to view, edit the speed dial list and pick the number you want to call.
[Call History] button allows you to browse, edit call history and pick the number you want to call.
[Talk] button allows you to make or receive a call.
Alternatively, you may press [SEND] on the physical keypad.
[End] button allows you to hang up a call.
Alternatively, you may press [END] on the physical keypad. 6.2.3. VOLUME SYSTEM AND RINGER VOLUME Tap the speaker icon in the title bar drop-down list to change system volume or phone ringer volume. You may also mute it or have it set as vibrate instead. An on-screen gauge will appear to indicate the current settings. Volume adjustment can also be done by pressing the volume up/down buttons on the right side of the mobile computer. 116 IN-CALL VOLUME Chapter 6 Using the Phone During a call, you can adjust the in-call volume by tapping the speaker icon in the title bar drop-down list, or by pressing the volume buttons on the right side of the mobile computer. An on-screen gauge will appear to indicate the current volume. 117 9200 Mobile Computer Reference Manual 6.3. PHONE SETTINGS Tap Menu | Options to configure phone settings if necessary. Sounds tab Tap the Sounds tab to adjust phone ring type, ring tone, and keypad sound. 118 Chapter 6 Using the Phone Security tab Tap the Security tab to change SIM card security and PIN code setting. Note: The PIN verification on the mobile computer allows three chances to input the correct PIN code. If input fails three times, the SIM card will be locked, and you will need to obtain the PUK code from your network operator to unlock it Services tab Tap the Services tab to get phone service settings from your network operator. 119 9200 Mobile Computer Reference Manual Network tab Tap the Network tab to change phone network settings and edit your preferred networks. Others tab Tap the Others tab to configure GPRS authentication type, broadcast channels, and SMS transmission settings. 120 Chapter 6 Using the Phone Band tab Tap the Band tab to change the band type and the local band in your geographic region. 121 9200 Mobile Computer Reference Manual 6.4. MAKING PHONE CALLS The phone features allow you to make or receive phone calls and assign a Speed Dial number to a contact. 1 indicates the reserved Speed Dial number for the contact (or Voicemail) 6.4.1. DIAL A NUMBER You can dial a number by any of the following ways:
Dialling Use the dial pad on the screen or the physical keypad simply enter the number you want to call. From Contacts Browse the contact list via the display panel to find the contact or number you want to call. Using Speed Dial Enter the speed dial number of the desired contact. From Call History Browse call history via the display panel to pick the number you want to call. 122 Chapter 6 Using the Phone 6.4.2. MAKE A CALL Dialling Out Tap the green [Talk] button on the phone keypad, or press [SEND] from the physical keypad. Hanging up Tap the red [End] button on the phone keypad, or press [END] from the physical keypad. 123 9200 Mobile Computer Reference Manual During a Call During a call, you may select to turn on the speaker, mute the receiver, or hold the line by tapping the respective on-screen buttons. Alternatively you may place another call by the Add Call button, or open the Contacts application. 6.4.3. ANSWER A CALL Answering a Call Tap the Answer button or press [SEND] from the physical keypad. Note: If your wired headset (CTIA standard) has an integrated hook switch, press the hook switch during an incoming call to answer it. When finished with the phone conversation, press the hook switch again to end the call. 124 Ignoring a Call Chapter 6 Using the Phone Tap Ignore button or press [END] from the physical keypad. Viewing a Missing Call When you have a missed call, will be displayed on the title bar. Tapping it will reveal a missed call icon
. Tap it to open the Call History page to identify the missed call. OR 125 9200 Mobile Computer Reference Manual On the Today Screen, an uppercase number 1 will appear next to the Phone label to indicate you have 1 missed call. Tap Notification on the softkey bar to view the notification message. When the notification message pops-up, tapping the open the Call History page, where you can check information about the missed call. icon on the softkey bar will Note: The right LED on top of the mobile computer will also flash red to notify there is a missed call. 126 Chapter 6 Using the Phone 6.5. CONFIGURING GPRS NETWORK 1. Tap Start Screen | Settings | Connections and select Connections. 2. Initially, you have to configure the GPRS settings. Tap Add a new modem connection and follow the on-screen instructions to enter the connection name and modem types. 127 9200 Mobile Computer Reference Manual 3. Enter the connection name and select Cellular Line (GPRS, 3G) from the drop-down list. Tap Next. 4. Specify the GPRS AP name for the mobile computer to connect to, for example, internet. Tap Next. 128 5. Chapter 6 Using the Phone Enter user name, password and domain information as necessary. Tap Advanced to access TCP/IP and server settings. When all settings are completed, tap Finish. Note:
(1)
(2) You must connect to the GPRS modem specified by the mobile phone operator. Performing hardware reset will not affect the wireless connection settings made under Wireless Manager. On the next system startup, the mobile computer will reflect the same wireless connection statuses as previously set. 129 9200 Mobile Computer Reference Manual 130 Chapter 7 USING READER CONFIGURATION UTILITY The Reader Configuration utility allows you to manage the barcode reader integrated on the mobile computer. IN THIS CHAPTER 7.1Launch Reader Configuration ......................................132 7.2Configure Reader Settings..........................................133 131 9200 Mobile Computer Reference Manual 7.1. LAUNCH READER CONFIGURATION 1. 2. Tap Start Screen | Settings | System | Reader Configuration to open the Reader Configuration Utility. Configure the associated reader settings and barcode settings on General tabbed page according to your needs. Perform a test scan and view the barcode and decoded data in the content field. Scanned data will display in the content field The Reader Configuration utility automatically detects the scan engine installed on the mobile computer. If you wish to restore the reader to default settings, delete the ReaderCfgINI.txt file in the Flash storage before enabling the program. Alternatively, tap the Restore Default button on the reader settings page. Note:
(1)
(2) 132 Chapter 7 Using Reader Configuration Utility 7.2. CONFIGURE READER SETTINGS The mobile computer is capable of reading printed barcodes. The reader modules can be either a CCD reader, laser (1D) reader, or 2D imager. The mobile computer is installed with Reader Configuration to set the scan engine built within. Use Reader Configuration to create a profile of settings that best suit your needs. 7.2.1. BARCODE READER Barcode reader configurations depend on the scan engine(s) installed on the mobile computer. Configure timeout, redundancy level and scanning behaviours according to your needs. To access barcode reader settings:
1. 2. Open Reader Configuration as described in Launch Reader Configuration. Tap Barcode Reader on General tabbed page. 133 9200 Mobile Computer Reference Manual CCD READER SETTINGS Barcode Reader CCD Reader Description Tap the Barcode Reader button to configure reader settings for the CCD scan engine.
Refer to the Reader Settings Table in Appendix II - CCD (SM1). Decode Session Timeout Sets the maximum time (configurable from 1 to 9 sec) for the Redundancy Level decoding process during a scan attempt. The default value is 3 sec. Sets how many successful readings should be done before linear barcodes such as Codabar, MSI, and Interleaved 2 of 5 can be decoded. Levels 1 to 4 available. The readings needed for each level are as follows:
Level 1 The following barcodes must be successfully read twice before being decoded: Codavar, MSI, Industrial 25 (Discrete 25), Interleaved 25. All barcodes must be successfully read twice before being decoded. All barcodes must be successfully read twice before being decoded, except for the following which must be read three times: MSI, Industrial 25 (Discrete 25), Interleaved 25. All barcodes must be successfully read three times before being decoded. Level 2 Level 3 Level 4 Scan Mode Sets the readers scanning behavior. Default is Laser.
Continuous to decode the same barcode repeatedly or decode different barcodes in a continuous motion.
Laser for scanning by pressing the scan trigger. Timeout Between Symbols Only available for Continuous mode. The default value is 1 sec. 1D LASER READER SETTINGS Barcode Reader Laser Reader Description Tap the Barcode Reader button to configure reader settings for the laser scan engine.
Refer to the Reader Settings Table in Appendix III -Laser (SE955). Decode Session Timeout Sets the maximum time (configurable from 1 to 9 sec) for the decoding process during a scan attempt. The default value is 3 sec. 134 Chapter 7 Using Reader Configuration Utility Redundancy Level Sets how many successful readings should be done before linear barcodes such as Codabar, MSI, and Interleaved 2 of 5 can be decoded. Levels 1 to 4 available. The readings needed for each level are as follows:
Level 1 The following barcodes must be successfully read twice before being decoded: Codavar, MSI, Industrial 25 (Discrete 25), Interleaved 25. All barcodes must be successfully read twice before being decoded. All barcodes must be successfully read twice before being decoded, except for the following which must be read three times: MSI, Industrial 25 (Discrete 25), Interleaved 25. All barcodes must be successfully read three times before being decoded. Level 2 Level 3 Level 4 Scan Angle Scan Mode Select the scan angle for Long Range Laser scan engine. Default is wide.
wide for 35
narrow for 47 Sets the readers scanning behavior. Default is Laser.
Continuous to decode the same barcode repeatedly or decode different barcodes in a continuous motion.
Laser for scanning by pressing the scan trigger. Timeout Between Symbols Only available for Continuous mode. The default value is 1 sec. 2D IMAGER SETTINGS Barcode Reader 2D Reader Description The 2D scan engine is capable of reading linear and 2D barcodes. Tap the Barcode Reader button to configure reader settings for the 2D scan engine.
Refer to the Reader Settings Table in Appendix IV - 2D Imager
(SE4500DL). Decode Session Timeout Sets the maximum time (configurable from 1 to 9 sec) for the Decode Illumination Aiming Pattern decoding process during a scan attempt. The default value is 3 sec. Decide whether to flash illumination on every barcode capture to aid decoding.
Turn on (internal LED)
Turn off Decide whether to project the aiming pattern during barcode capture.
Turn on
Turn off 135 9200 Mobile Computer Reference Manual Redundancy Level Sets how many successful readings should be done before certain barcodes are decoded. Levels 1 to 4 available; default setting is Level 1. The readings needed for each level are as follows:
Level 1 The following barcodes must be successfully read twice before being decoded:
Code Length 8 characters or less 4 characters or less 8 characters or less 8 characters or less Barcode Types Codabar MSI Industrial 25 (Discrete 25) Interleaved 25 All barcodes must be successfully read twice before being decoded. All barcodes must be successfully read twice before being decoded, except for the following which must be read three times:
Barcode Types Codabar MSI Industrial 25 (Discrete 25) Interleaved 25 Code Length 8 characters or less 4 characters or less 8 characters or less 8 characters or less Level 2 Level 3 Level 4 All barcodes must be successfully read three times before being decoded. Selects the security level to ensure decoding accuracy considering the printed quality of certain barcodes. Default setting is Level 0. The higher the level, the greater the security. Options are:
Level 0 1 2 3 Description With this default, the scan engine is aggressive enough to decode most in-spec barcodes. Select this level if misdecodes have occurred. It fixes most misdecodes. Select this level if Level should fail to eliminate misdecodes. Select this level if Security Level 2 should fail to prevent misdecodes. However, as this level actually impairs the decoding ability of the decoder, a safer solution would be to improve the quality of the bar codes to read. Security Level 136 Chapter 7 Using Reader Configuration Utility 7.2.2. RFID READER When an RFID reader is detected, the RFID Reader option is available on General tab of the reader settings page. The RFID Reader check box is selected by default. Deselect it to disable the RFID reader on the mobile computer. This is occasionally needed when you only want to read printed barcodes, lest RFID tags are read and decoded. To access RFID reader settings:
1. 2. Open Reader Configuration as described in Launch Reader Configuration. Tap RFID on General tabbed page. READ BLOCKS SETTINGS Setting Read blocks Login Key Turn off RFID when device suspend Start position Reading length
(byte) Descriptions Reads data from an RFID tag. Shows what key A and key B currently is.
Keys A and B are what the RFID reader module relies on to access (read or write) an RFID tag. In default state, both keys are a sequence of twelve F characters because they are Mifare tags factory default. Modify these default keys if necessary. Select this to turn off RFID function when the mobile computer enters suspension. Once the mobile computer is resumed from suspension, RFID function will be automatically restored. Defines where to start reading data from.
See Appendix V: RFID Tag Default Block. Defines how many bytes of data to read. Default Selected Key A &
FFFFFFFFFFFF Deselected
-1 block, byte 0)
(default 100 137 9200 Mobile Computer Reference Manual Display hex values Displays decoded data in hex values.
Generally the readable RFID data lies in a user block. If the data to collect is located in a non-user block such as the lock block, select Display hex values in case the data to collect involves any invisible character. Deselected Timeout Sets the maximum time for decoding an RFID Tag during a scan attempt. Configurable from 1-20 sec. 3 sec WRITE BLOCKS SETTINGS Setting Write blocks Login Key Turn off RFID when device suspend Start byte to write Display hex values Descriptions Writes data to an RFID tag Shows what key A and key B currently is.
Keys A and B are what the RFID reader module relies on to access (read or write) an RFID tag. In default state, both keys are a sequence of twelve F characters because they are Mifare tags factory default. Modify these default keys if necessary. Select this to turn off RFID function when device enters suspension. Once the mobile computer is resumed from suspension, RFID function will be automatically restored. Defines where to start writing data to.
See Appendix V: RFID Tag Default Block. Writes data in hex values.
Generally an RFID tags writeable block lies in the user block. However, if the block to write is a non-user block such as the lock block, select Use hex values to write data in hex values in case the block to write involves any invisible character. Default Deselected Key A &
FFFFFFFFFFFF Deselected
-1 (default block, byte 0) Deselected Timeout Sets the maximum time (configurable from 1 to 20 sec) for the decoding process during a scan attempt. 3 sec Input string to write Defines what to write.
Note that different RFID tags may have different default blocks (also pages), and different amount of bytes and number of blocks. The data written might be truncated to fit the blocks of the targeted RFID tag. Therefore part of the data may be discarded when it comes to the end of a block end.
See Appendix V: RFID Tag Default Block. Note: Refer to the specifications of the RFID tag to read for its memory organization. 138 Chapter 7 Using Reader Configuration Utility 7.2.3. MIFARE KEY MIFARE KEYS Mifare Keys setting changes the security keys A and/or B for a Mifare tags data block. Keys A and B are two keys that enable the RFID reader to access (read or write) a Mifare tags data block. To open Mifare Keys setting page:
1. 2. Open Reader Configuration as described in Launch Reader Configuration. Tap Mifare Keys on General tabbed page. Edits keys A & B Assigns the blocks to apply the change Shows what each key A and B currently is. Tap this button to enact the change. Settings Login Key New Key A New Key B Descriptions Select between key A and key B for the login key. Assigns new key A, which must be a hex string of 12 bytes.
If it is the other key (key B) that you want to change, you still need to assign the current key A here to be able to enact the change. Default Key A
Assigns new key B, which must be a hex string of 12 bytes.
If it is the other key (key A) that you want to change, you still need to assign the current key B here to be able to enact the change.
Sector Sets the blocks to apply the change. 1
(blocks 4, 5, & 6) 139 9200 Mobile Computer Reference Manual To change the value of key A and/or B:
1. Open Reader Configuration as described in Launch Reader Configuration Tap Mifare Keys on General tabbed page. Configure which key to change, how it is changed to, and the block to apply the change. Tap (slightly contact) the mobile computers scanning window with the RFID tag to write the change to. Tap the Write button on Mifare Keys settings page. The change is written to the RFID tag. 2. 3. 4. 5. 140 Chapter 7 Using Reader Configuration Utility 7.2.4. DATA OUTPUT Tap the Data Output button on the General tabbed page to access settings for data output after decoding as well as configure the associated settings. To access data output settings:
1. 2. Open Reader Configuration as described in Launch Reader Configuration. Tap Data Output on General tabbed page. WHERE TO OUTPUT Data Output Keyboard Emulation Windows Message Data is emulated as typed text and sent to the active window.
When Local machine is selected, simply run your application or built-in program, such as WordPad, to start with data collection.
When RDP server is selected, run the Remote Desktop Connection program to connect to a remote computer. Note that this option is unable to emulate double-byte font, such as Big-5 or Unicode characters on the remote PC. When selected, a Windows message will be broadcasted after decoding.
Intercept the decode message in your application.
Call Windows API (ReadMsgQueue) in your application to retrieve the decoded data. Default Local Machine Disable 141 9200 Mobile Computer Reference Manual Windows Event When selected, a Windows event will be broadcasted after Disable decoding.
Intercept the decode event in your application.
Call Windows API (ReadMsgQueue) in your application to retrieve the decoded data. Note:
(1)
(2) Refer to 9200 .NET or C/C++ Programming Guide for details on Windows Message and Windows Event. Sample programs are provided by request. For the use with a barcode decoding program other than ReaderConfig.exe, a dynamic-link library (DLL) file is provided. HOW TO OUTPUT Auto Enter Auto Enter Char Prefix String Suffix String Display Code Type Display Code Length Display RFID UID Display RFID user data Adds an Enter character before or after each scanning act. This function spares you the trouble of pressing [Enter] key to confirm each scan. Options are:
None
Scan + Enter Char
Enter Char+Scan Adds a key code before or after the decoded data. This setting is available only when Auto Enter is enabled. Options are:
None
Carriage return
Tab
Space
Comma
Semicolon Affixes 0~10 characters to the left of the output data. Affixed 0~10 characters to the right of the output data. Prefixes code type to the decoded data. Scan + Enter Char Carriage Return NULL NULL Disabled Disabled Enabled Suffixes code length to the decoded data. Outputs the UID of the RFID tag to read.
This setting is available only when an RFID reader is integrated on the mobile computer and is enabled. Outputs the user data of the RFID tag to read.
This setting is available only when an RFID reader is integrated on the mobile computer and is enabled. Disabled Field delimiter Adds a field delimiter in the decoded data to separate the data to
, (comma) segments.
For printed barcodes: This delimiter separates code type , decoded data, and code length (if applicable)
For RFID tags: This delimiter separates UID and user data (if both are applicable) 142 Chapter 7 Using Reader Configuration Utility 7.2.5. NOTIFICATIONS The Notifications page allows you to configure how you want to be notified of a successful decoding. To access notification settings:
1. 2. Open Reader Configuration as described in Launch Reader Configuration. Tap Notifications on General tabbed page. Sound / Vibration Good Read via Speaker Vibration Duration Enable LED Notification Sets the sound for good read.
Select between Mute and sounds 1 through 9. Sets whether to enables tactile feedback (vibration) for good read, and vibration duration. Configurable between 0~5.0 (sec.) Select the check box to enable Scanner beam LED and Scanner decode (Good Read) LED. The top right LED will light up in orange when the scan key is pressed. The top left LED will flash green to indicate a successful decoding. Default Sound 1 0 (= Disable) Disable 143 9200 Mobile Computer Reference Manual 7.2.6. RESET TO DEFAULT Tap Restore Default on the reader settings page to reset all settings back to default. 7.2.7. AUTO-START READER CONFIGURATION If you would like to auto-start the Reader Configuration application next time the mobile computer is powered on, select the Auto start when powered on check box. Reader Configuration will run in the background once the mobile computer is restarted to facilitate barcode reading. 144 Chapter 7 Using Reader Configuration Utility 7.2.8. SYMBOLOGY SETTINGS On the Symbologies tab, determine whether to enable or disable a specific symbology. Note: The symbology settings vary by the scan engine (CCD, 1D laser or 2D imager) installed. 1. 2. Open Reader Configuration as described in Launch Reader Configuration. Tap Symbologies tabbed page.
Refer to Appendix I - Scan Engine Settings for the symbologies supported by the installed scan engine.
Refer to the Symbology Settings Table in Appendix II - CCD (SM1).
Refer to the Symbology Settings Table in Appendix III - Laser (SE955).
Refer to the Symbology Settings Table in Appendix IV - 2D Imager (SE4500DL). 145 9200 Mobile Computer Reference Manual 7.2.9. ABOUT This tabbed page delivers the software version, developer info, and copyright information. 1. 2. Open Reader Configuration as described in Launch Reader Configuration. Tap About tabbed page. 146 Chapter 8 USING CAMERA The Camera utility allows taking still images or videos from the built-in digital camera. Tap Start Screen | Camera to open the Camera utility. IN THIS CHAPTER 8.1Camera Interface ......................................................148 8.2Taking a Picture........................................................149 8.3Shooting a Video.......................................................151 8.4Camera Settings .......................................................153 8.5Pictures & Videos ......................................................155 147 9200 Mobile Computer Reference Manual 8.1. CAMERA INTERFACE The Camera application supports still image capturing and video recording. Still mode Video mode The icons on top of the screen indicate camera status and image properties. Icon Description In Still mode: number of pictures that can be taken. In Video mode: available recording time. Camera status and information on image resolution.
indicates the camera is in Still mode indicates the camera is in Video mode The buttons at the bottom of the screen are described as below. Description Tap to switch between Still and Video modes. Tap to open Pictures & Videos folder to view images and playback videos. Refer to Pictures & Videos. Tap to configure camera settings if necessary. Refer to Camera Settings. Exit and turn off the camera. Button 148 Chapter 8 Using Camera 8.2. TAKING A PICTURE When launched, the camera is set to Still mode by default for picture taking, and a preview screen is displayed. 1. Aim at the object you want to shoot. Drag the slider to zoom in (+) or zoom out
(-) an image. Drag the slider to adjust the focus 2. Press [Scan] key or [Enter] on the physical keypad to take a picture. Each picture will be automatically saved under the designated storage location. 149 9200 Mobile Computer Reference Manual 3. Before the camera utility jumps back to the preview screen, you may tap the advanced buttons at the bottom of the review screen, which will be retained for about five seconds.
Tap to delete the image file.
Tap
Tap to send the picture via text message or e-mail. to return to the preview screen. 150 Chapter 8 Using Camera 8.3. SHOOTING A VIDEO When switching to Video mode, a preview screen will be displayed. 1. Hold still and take aim at the object you want to shoot Available recording time 2. Press [Scan] or [Enter] on the physical keypad to start recording a video. Remaining recording time 151 9200 Mobile Computer Reference Manual 3. Press [Scan] or [Enter] on the physical keypad to end recording. Otherwise, it will stop automatically after reaching the time limit. Refer to Advanced Settings.
Tap to delete the image file.
Tap
Tap to send the picture via text message or e-mail. to return to the preview screen. 152 Chapter 8 Using Camera 8.4. CAMERA SETTINGS On the softkey bar, tap the button to configure camera settings if necessary. Brightness, Contrast, Sharpness Adjusts brightness, contrast, and sharpness for the picture to take. Mode Sets a scene mode for the picture to take. By default, no special mode is applied. Options are:
Icon White Balance Description Backlight Night mode Stabilize Outdoor Low light Tap to select a specific scenario for setting white balance. By default, the camera is set to adjust automatically. Options are:
Icon Effect Description Bright light Indoor light Sunny light Cloudy light Applies a special effect to the picture to take. By default, no special effect is applied. Options are:
Monochrome, Negative, and Sepia Timer Enables the timer which allows taking the picture a period of time after the [Scan]
key or [Enter] is pressed. By default, timer is disabled. Options are:
3 seconds, 5 seconds, and 10 seconds
This is only applicable in Still mode. 153 9200 Mobile Computer Reference Manual GPS tagging Enables/disables GPS tagging for the picture to take. Options are:
Enable, Disable Quality Sets quality for the picture to take. Options are:
High, Medium Size Select the image size for the picture to take. Options are:
320x240, 640x480, 1280x960, 1600x1200, 2048x1536 Storage By default, the captured pictures are stored on the mobile computers main memory. Camera Mode Still Mode Store Folder
\My Device\My Documents
\My Pictures\YYMMDD Video Mode
\My Device\My Documents
\My Videos\YYMMDD File Format imgXXXXX.jpg (XXXXX stands for 5-digit serial number starting from 00000) VideoXXX.3gp (XXX stands for 3-digit serial number starting from 000)
If an SD card is installed and set as the storage location, the icon on the upper left of the preview screen will change to
. Flash and Audio Sets whether to flash the light for picture taking, and to include audio for video recording. Options are:
Audio on, Audio off, Flash on , Flash off 154 Chapter 8 Using Camera 8.5. PICTURES & VIDEOS Tap Start Screen | Pictures & Videos to open the default image folder \My Device\My Documents\My Pictures. 8.5.1. VIEW AN IMAGE 1. Locate the target folder and the desired picture. The subfolders are named with the date YYMMDD (2-digit year, 2-digit month and 2-digit date) which images were taken. Subfolder in date format Shortcut to Camera 155 9200 Mobile Computer Reference Manual 2. Select a desired picture and tap View at the bottom of the screen. 3. Tap Menu on the softkey bar to set the picture as background, start a slide show, beam pictures, edit or rotate pictures, etc. Refer to Advanced Settings. Tap Send on the softkey bar to send the picture via text message or e-mail. Time Stamp is displayed on the lower right of each picture Tap OK to close the current window. 4. 156 Chapter 8 Using Camera 8.5.2. PLAYBACK A VIDEO 1. Locate the target folder and the desired videos. The subfolders are named with the date YYMMDD (2-digit year, 2-digit month and 2-digit date) when videos were recorded. Subfolders in date format 2. Select a desired video and tap Play on the softkey bar.. Tap Menu on the softkey bar to edit, send or beam videos, etc. Refer to Advanced Settings. 3. The video will be played in Windows Media player. Tap [] to end the application. 157 9200 Mobile Computer Reference Manual 8.5.3. ADVANCED SETTINGS Under My Pictures or My Video screen, tap Menu | Tools | Options to open advanced settings. General tab When sending a picture by e-mail, it can be resized in favor of the transfer speed. You may tap the drop-down list to select a desired picture size if necessary. You may also change the rotation direction of the picture in the General tab configuration screen. 158 Chapter 8 Using Camera Slide Show tab By default, slide shows are played in Portrait view. You may change to use landscape view instead to make pictures properly fit the screen. If you select Play screensaver when connected to my PC and idle for 2minutes, pictures stored in the default image folder \My Device\My Documents\My Pictures will be used in a slideshow screensaver on the mobile computer. Camera tab All still images are prefixed with img and saved to the main memory at high compression level by default. You may change the prefix, save files to your memory card, or adjust the compression. 159 9200 Mobile Computer Reference Manual Video tab While recording a video, audio sound will be included. You may disable the check box or set a time limit for videos so that the file size can be reduced. Tap [OK] to save the current settings and return to the previous window. 160 Chapter 9 MORE APPLICATIONS This chapter introduces manufacturer-developed applications that are preinstalled on the mobile computer to strengthen system management and make the mobile computer more competent. IN THIS CHAPTER 9.1GPS Receiver............................................................162 9.2Button Assignment....................................................163 9.3Mobile Ghost ............................................................166 9.4Time Sync Utility.......................................................170 9.5Signature Utility........................................................172 161 9200 Mobile Computer Reference Manual 9.1. GPS RECEIVER The 9200 Mobile Computer is equipped with a GPS antenna for obtaining location and time information from the Global Positioning System (GPS). Since the mobile computer does not come with any preinstalled navigation software, you may need to purchase third-party navigation software separately. The GPS receiver hosted on the mobile computer uses COM 7 to output NMEA messages, as long as the COM port is opened. In your application, open the COM port with the correct configuration. The table below lists the configuration of the integrated GPS receiver:
Serial Configuration Baud Rate Data Bits Parity Stop bits COM Port Settings 4800 8 None 1 Note: For multiple GPS-enabled programs to access GPS data, tap Start Screen |
Settings | System and select External GPS. Specify a program port and the correct hardware port. In order to speed up start-up time, we suggest you to download the ephemeris information for initial setup. Go to Start Screen | Settings | System and select GPS Manager to update the ephemeris. 162 Chapter 9 More Applications 9.2. BUTTON ASSIGNMENT Use Button Assignment to re-define the functions of physical keys to have them trigger different functions. For instance, you can assign a key to simulate another keys behaviour, to launch a specific program, or to deliver effects of a specific key code. Reassignable keys include:
Side triggers (Left and right scan keys)
Application key (App Key)
[-] (Hyphen) key
[.] (Period) key. 9.2.1. REASSIGN PHYSICAL KEYS 1. Tap Start Screen | Settings | System | Button Assignment. A screen shows with a picture of the mobile computer and its reassignable physical keys. 163 9200 Mobile Computer Reference Manual 2. Tap the label of the key you wish to reassign. Available options include:
Default: Recovers the default settings.
Assign a key: Defines a certain key to act as another key. Select the desired function in the drop-down list. Options include:
Enter
Scan
Esc
Delete
Backspace
Space
Tab
F1~12
Start Menu
Alt
OEM_Key1(0xE9)
OEM_Key2(0xEA)
OEM_Key3(0xEB)
OEM_Key4(0XEC)
OEM_Key5(0XED)
OEM_Key6(0xEE)
OEM_Key7(0xEF)
OEM_Key8(0xF0)
OEM_Key9(0xF1)
OEM_Key10(0x2A)
Send(VK_TTALK)
End(VK_END)
Up
Down
Left
Right
TAB
Volume Up
Volume Down
OK
Home(VK_HOME)
Home(VK_HOME) 164 Chapter 9 More Applications
Fn+ESC(0xF5)
F13~24
Home(VK_LWIN+VK_APP)
Launch a program: Defines a key to quick-launch an application. Use the Browse button key, or manually enter the path of the desired file.
User-defined key code: Allows users to change the key function as desired by to select an executable file to open after pressing the entering the hex value of the target key. 3. 4. Tap OK on the menu bar (located at the bottom of the screen) to apply the changes, or tap X to discard the settings. Tap OK on the softkey bar to store the settings and exit the application. 9.2.2. RESET PHYSICAL KEYS TO DEFAULT Tap the Reset button on the lower right of the screen to change all listed key functions back to default. 165 9200 Mobile Computer Reference Manual 9.3. MOBILE GHOST Mobile Ghost is a system cloning tool that copies user data and registry settings on your mobile computer in the form of a backup image. You may use the created backup images for full restoration of registry settings and user files. Through backup image creation, system configuration and application settings can be reserved at a state when the system is stable. This is especially helpful when the system encounters unexpected crash down or hardware/software error. In addition, you may use this tool to copy system settings and user files on a certain mobile computer and write them to a set of other mobile computers so all resemble the same user environment. To open the Mobile Ghost, tap Start Screen | CipherLab Utilities | Mobile Ghost. Two screen options show for creating a backup image, or restoring a previously created one. Note: As long as any changes are made to the system configurations and settings, you must create a new backup image for the system registry to be updated. 166 Chapter 9 More Applications 9.3.1. CREATE BACKUP IMAGE 1. To create a backup image for system registry and settings, a memory card is required. Insert a microSD card into the SD card slot as described in Using Memory Card. 2. Open Mobile Ghost by tapping Start Screen | CipherLab Utilities | Mobile Ghost. 3. Check Create backup image and tap OK. A warning message shows notifying that system reboot (restart) is needed for backup to continue and No to abort. image creation. Tap Yes Note:
(1) To prevent data loss during backup, make system battery level sufficient, preferably over 50%, or make sure the mobile computer is connected to external power. sure is
(2) Do not remove the microSD card during backup image creation. 4. The mobile computer restarts, and the backup procedure begins shortly. An on-screen message appears stating that backup is currently under progress. When backup is completed, a .bgo file named in date format (YYYY-MM-DD_001) will be created on the microSD card. The mobile computer will restart once more.
[Start backup]
(Backup in progress) Please wait for a few minutes 167 9200 Mobile Computer Reference Manual 9.3.2. RESTORE BACKUP IMAGE 2. Restoring a backup image will change system settings back to the conditions when the backup image was created. 1. To restore a backup image which was previously created, make sure the microSD card containing the desired backup image is inserted on the mobile computer. Open Mobile Ghost by tapping Start Screen | CipherLab Utilities | Mobile Ghost. Check the Restore option and select a backup image in the drop-down list. Tap OK to confirm. 3. A warning message appears reminding that system reboot (restart) is needed for backup image restoration. Make sure all user data and tasks are saved before tapping Yes to confirm restoration. 168 4. Chapter 9 More Applications Device storage begins formatting. Once completed, restoration starts using the selected backup image. When restoration is completed, the mobile computer will restart with system registry and settings of the selected backup image applied. 169 9200 Mobile Computer Reference Manual 9.4. TIME SYNC UTILITY Use this to sync system time with a server, either via wireless connection to an NTP server or via GPS signal detection. To synchronize system time on the mobile computer:
1. Open time sync utility by tapping Start Screen | Settings | System | TimeSync. 2. To sync time with an NTP server, select the preferred NTP server and tap Sync Time. The sync results will appear in the content field shortly. Note: To sync time with an NTP server, make sure your mobile computer is wirelessly connected, and the Synchronize system time checkbox is selected. 170 Chapter 9 More Applications 3. To sync time via GPS signal, open GPS tab and tap Sync Time. The mobile computer will start to detect available GPS signals and identify the correct time. Satellite count and time results will appear in the content field below. Note: To sync time via GPS signal, make sure your mobile computer is located in an open area with a clear view of the sky, and the GPS software port is correctly set under External GPS. 171 9200 Mobile Computer Reference Manual 9.5. SIGNATURE UTILITY Signature utility captures, views, and edits signature files stored on the mobile computer. Signature utility is provided in two file formats, .cab and .exe, on the CD-ROM shipped along with the mobile computer. Install the application on the mobile computer according to your needs. CAB FILE INSTALLATION 1. 2. 3. Insert the product CD into the CD-ROM drive on your PC. Connect the mobile computer with your PC via ActiveSync. Copy the .cab file from your PC to a path of your selection on the mobile computer. On the mobile computer, use File Explorer to locate the copied .cab file. Tap the .cab file to start installation. Select the location to store the application and tap Install. 4. 5. 172 Chapter 9 More Applications 6. Signature utility is installed on the mobile computers Start Screen. 173 9200 Mobile Computer Reference Manual
.EXE FILE INSTALLATION 1. 2. 3. Insert the product CD into the CD-ROM drive on your PC. Connect the mobile computer with your PC via ActiveSync. On your PC, double-click the .exe file to start the installation. An installation wizard appears to guide you through the process. 174 4. Chapter 9 More Applications 5. Signature utility is installed on the mobile computers Start Screen.. 175 9200 Mobile Computer Reference Manual 9.5.1. CAPTURING A SIGNATURE After installing Signature utility on your mobile computer, open the application from Start Screen | Signature. The application opens showing a toolbar and a signing area. Toolbar Signing area Toolbar functions include:
Toolbar icon Description Creates a new signature file. Loads an existing signature file. Saves the created/edited signature to an image file (BMP, JPG or Locus format). Clears the signing area. Opens preferences settings. Views utility info including developer and software version. 176 Use the stylus to sign your signature in the signing area. Chapter 9 More Applications Tap to clear the signature and sign a new one if necessary. to save the signature as an image file. Tap Tap OK to exit the program. 1. 2. 3. 177 9200 Mobile Computer Reference Manual 9.5.2. VIEWING A SIGNATURE 1. To view a signature image, tap on the menu bar and select an image to load. The image will be displayed along with a message asking whether you would like to modify the picture. 2. Tap Yes to change the signature if necessary. Note: The maximum size for resolution of an image file is 640x480 pixels. Any image larger than this size will be unable to load. 178 Chapter 9 More Applications 9.5.3. CHANGING SIGNATURE SETTINGS 1. Tap to configure signature settings if necessary
Pen Width tab: Set the pen width (1-5 pixels) for signing. The default pen width is 1.
Pen Colors tab: Set the pen color using the available colors, or enter a new color in RGB value (0-255). The default pen color is black
Background Colors tab: Set the background color using the available colors, or enter a new color in RGB value (0-255). The default background color is white. 179 9200 Mobile Computer Reference Manual After done configuring signature settings, tap OK on the softkey bar to save the changes. 2. 180 SPECIFICATIONS PLATFORM, PROCESSOR & MEMORY Operating System & CPU Windows Version CPU Microsoft Windows Embedded Handheld 6.5 Qualcomm MSM7225-1 at 528 MHz Memory ROM RAM Expansion Slot 512 MB NAND flash memory 256 MB DDR SDRAM One microSD card slot (256MB to 4GB)
SDHC supported (4GB to 32 GB) COMMUNICATION & DATA CAPTURE Communication USB Client WPAN WLAN WWAN GPS USB Client 2.0 Specification Built-in module for Bluetooth version 2.1 + EDR Class II connectivity Built-in module for 802.11b/g networking
WAPI support for China only Ordering Option - built-in module for GSM/EDGE/UMTS/HSPA Built-in GPS with AGPS support, ephemeris downloadable Data & Image Capture Digital Camera Barcode Reader 3.0 CMS with LED flash and auto focus Ordering options include CCD
1D Laser
2D Imager HF RFID Reader
Supports ISO14443A (Mifare) and B, ISO 15693 181 9200 Mobile Computer Reference Manual ELECTRICAL CHARACTERISTICS Batteries Main Battery Pack Power Adaptor Power Supply Cord with Universal Power Adaptor Rechargeable Li-ion battery 3.7 V, 3300 mAh Input Output AC 100~240 V, 50/60 Hz DC 5 V, 4 A Working Time (Laser, testing cycle = 20 seconds) Conditions include: scanning complete within one second, backlight on during scanning. Scanning, computing and data transfer finished within 20 seconds with GSM and WiFi on. In this mode, battery power will support working time for up to 12 hours. PHYSICAL CHARACTERISTICS Color Touch Screen Display Display Resolution 2.8 Transflective/Transmissive TFT-LCD, 65k colors QVGA (240 320 pixels) Keypad Layout Notifications Status LED Audio Vibrator 28-key Alphanumeric keypad with LED backlight Two LEDs:
Left: Charging status (Red/Green) and Scanner Good Read
(Green, flash once)
Right: Scanner Light Beam (Orange) Integrated with one speaker, microphone and receiver CTIA Headset jack for 3.5 mm earphone
Bluetooth headset supported 0.45G force, for scanner Good Read and system notifications Dimensions & Weight Dimensions Weight 175 mm (L) x 60 mm (W) x 34 mm (H) 310 g (Laser, including battery) 182 Specifications ENVIRONMENTAL CHARACTERISTICS Temperature Operating SM1 SE955 SE4500 Storage Charging Humidity Operating Storage Resistance Impact Resistance Tumble Test Splash/Dust Resistance PROGRAMMING SUPPORT
-10 C to 50 C (transmissive), -20 C to 50 C (transflective)
-10 C to 60 C (transmissive), -20 C to 60 C (transflective)
-10 C to 55 C (transmissive), -20 C to 55 C (transflective)
-20 C to 60 C (transmissive), -30 C to 70 C (transflective), both without battery, with humidity 5% to 85% (non-condensing) 0C to 40C 10% to 90% (non-condensing) 5% to 85% (non-condensing) Multiple 1.5m drops onto concrete 1000 times at 0.5 m per applicable IEC tumble specifications IP65 per applicable IEC sealing specifications Development Environment & Tools Integrated Development Environment Software Development Kit Visual Studio 2008 Visual Studio 2005 Microsoft SDK System API (DLL) for system configuration Reader API (DLL) for reader configuration Software & Utilities CipherLab Software Package Reader Configuration Third-party Software
Signature
AppLock
MIRROR Browser for web application
Terminal Emulation
SOTI MobiControl for remote device control
Naurtech CETerm Terminal emulator (3270, 5250, VT) and industrial web browser
Wavelink Emulator
Kalipso 183 9200 Mobile Computer Reference Manual ACCESSORIES Accessory Options
LCD Protective Film
Snap-on Charging & Communication Cable (USB or RS-232)
Charging & Communication Cradle 184
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-09-25 | 5745 ~ 5825 | DTS - Digital Transmission System | Original Equipment |
2 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 | Effective |
2013-09-25
|
||||
1 2 3 4 5 | Applicant's complete, legal business name |
CipherLab Co., Ltd.
|
||||
1 2 3 4 5 | FCC Registration Number (FRN) |
0015617624
|
||||
1 2 3 4 5 | Physical Address |
12F, 333, Dunhua S.Rd., Sec.2, Taipei, Taiwan
|
||||
1 2 3 4 5 |
Taipei, N/A
|
|||||
1 2 3 4 5 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 3 4 5 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 5 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
1 2 3 4 5 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 4 5 | Grantee Code |
Q3N
|
||||
1 2 3 4 5 | Equipment Product Code |
9200C
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 | Name |
H****** J********
|
||||
1 2 3 4 5 | Title |
R & D Engineer
|
||||
1 2 3 4 5 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 4 5 | Fax Number |
+886-********
|
||||
1 2 3 4 5 |
h******@cipherlab.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 4 5 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 5 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Computer | ||||
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 5 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 | Grant Comments | Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 0.24 W/kg, <0.10 W/kg and 0.61 W/kg, respectively. | ||||
1 2 3 4 5 | Output power is conducted. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. End users must be informed of the body worn requirements for satisfying RF exposure compliance. | |||||
1 2 3 4 5 | Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 1.14 W/kg, <0.10 W/kg and 1.33 W/kg, respectively. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. | |||||
1 2 3 4 5 | Output power is ERP for Part 22 and EIRP for Part 24. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 0.38 W/kg, 0.23 W/kg and 1.33 W/kg, respectively. HAC Ratings: M3T3 -2007 | |||||
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 2 3 4 5 | Name |
R******** C******
|
||||
1 2 3 4 5 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 4 5 | Fax Number |
+886-********
|
||||
1 2 3 4 5 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 19 20 28 CC HX | 2412 | 2462 | 0.147 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 19 20 28 CC HX | 5745 | 5825 | 0.056 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 19 20 28 CC | 13.56000000 | 13.56000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 19 20 28 CC | 2402.00000000 | 2480.00000000 | 0.0040000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | 19 20 28 CC HX | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | 19 20 28 CC HX ND | 5260 | 5320 | 0.024 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | 19 20 28 CC HX ND | 5500 | 5700 | 0.042 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 22H | 19 20 28 HC | 824.2 | 848.8 | 1.167 | 2.5 ppm | 260KGXW | |||||||||||||||||||||||||||||||||
5 | 2 | 22H | 19 20 28 HX | 824.2 | 848.8 | 1.089 | 2.5 ppm | 260KG7W | |||||||||||||||||||||||||||||||||
5 | 3 | 22H | 10 20 28 HC | 826.4 | 846.6 | 0.154 | 2.5 ppm | 4M18F9W | |||||||||||||||||||||||||||||||||
5 | 4 | 24E | 19 20 28 HC | 1850.2 | 1909.8 | 1.042 | 2.5 ppm | 255KGXW | |||||||||||||||||||||||||||||||||
5 | 5 | 24E | 19 20 28 HX | 1850.2 | 1909.8 | 0.977 | 2.5 ppm | 260KG7W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC