all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User manual | Users Manual | 2.17 MiB | ||||
1 2 3 | Parts List/Tune Up Info | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Internal Photos |
1 2 3 | User manual | Users Manual | 2.17 MiB |
Reference Manual 9500CE Terminal Terminal Version 1.03 Printed on 19 March, 2008 Copyright Notice Copyright 2006 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development this information may change without notice. The information and intellectual property contained herein is confidential between CIPHERLAB and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find any problems in the documentation, please report them to us in writing. CIPHERLAB does not warrant that this document is error-free. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of CIPHERLAB CO., LTD. For product consultancy and technical support, please contact your local sales representative. Also, you may visit our web site for more information. The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. The editorial use of these names is for identification as well as to the benefit of the owners, with no intention of infringement. CIPHERLAB CO., LTD. Website: http://www.cipherlab.com II FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &your body. It only operated in hand-held used. If you only transfer data to Host by WLAN, please keep the minimum distance 20cm between machine & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Important Safety Precautions
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
The use of any batteries or charging devices, which are not originally sold or manufactured by CipherLab, will void your warranty and may cause damage to human body or the product itself.
The charging and communication cradle uses an AC power adaptor. A socket outlet shall be installed near the equipment and shall be easily accessible. The power adaptor should comply with L.P.S test. Make sure there is stable power supply for the terminal or its peripherals to operate properly.
DO NOT disassemble, incinerate or short circuit the battery pack.
DO NOT expose the terminal or the battery pack to any flammable sources.
Under no circumstances, internal components are self-serviceable.
Per FDA and IEC standards, the scan engines described in this manual are not given a laser classification. However, the following precautions should be observed:
CAUTION This laser component emits FDA/IEC Class 2 laser light at the exit port. Do not stare into beam. III Care & Maintenance
This terminal is intended for industrial use. The terminal is rated IP 64, however, it may do damage to the terminal when being exposed to extreme temperatures or soaked wet.
When the body of the terminal gets dirty, use a clean and wet cloth to wipe off the dust. DO NOT use/mix any bleach or cleaner. Always keep the LCD dry.
For a liquid crystal display (LCD) or touch screen, use a clean, non-abrasive, lint-free cloth to wipe dust off the screen. DO NOT use any pointed or sharp object to move against the surface.
Battery disposal For green-environment issue, it is important that batteries should be recycled in a proper way.
If you want to put away the terminal for a period of time, download the collected data to a host computer, and then take out the battery pack. Store the terminal and battery pack separately.
When the terminal resumes its work, the main and backup batteries will take a certain time to become fully charged.
If you shall find the terminal malfunctioning, write down the specific scenario and consult your local sales representative. Industry Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of Industry Canada. Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe B prescrites dans la norme sur le material brouilleur: "Appareils Numeriques," NMB-003 edictee par l'Industrie.
(1) this device may not cause interference,and (2) this device must accept any interference, including interference that may cause undesired operation of the device."
IV Power Management For any portable device, power management is a critical issue especially when you are on the road. Below are some tips to help you save battery power.
To speed up charging the terminal, turn off the terminal and seat it in the cradle.
Bring a second battery pack on the road.
Stop wireless connectivity, Bluetooth, 802.11b/g that is not in use. The power to the wireless modules, 802.11b/g, is controlled by PwrMg.exe (the Wireless Power Manager), which can be found on the taskbar (
To save power, go to Start > Settings > Control Panel for related settings:
Double-tap the Display icon 1. Tap the Backlight tab. 2. Select one or both of the check boxes to automatically turn off the LCD backlight when using batteries or external power. From the appropriate list, select the amount of time the device should be idle before the backlight is turned off. 3. Then, tap the [Advanced] button to view more backlight options. 4. In the Settings tab, you can dim the LCD backlight when in a well-lit working area for AC and battery powered respectively. Double-tap the Power icon 1. Tap the Schemes tab. 2. Select the desired power scheme and options for suspending operation when not in use. V Contents Copyright Notice FCC Regulations Important Safety Precautions Care & Maintenance Power Management Preface i II III III IV V 1 Revision History .......................................................................................................! CHAPTER 1 - Introduction 3 1.1 Unpacking the package ...........................................................................................................................3 1.2 Options....................................................................................................................................................3 1.3 Product Highlights ..................................................................................................................................4 1.4 Nomenclature..........................................................................................................................................5 1.4.1 9500CE Terminal .....................................................................................................................5 1.4.2 Accessories & Peripherals ........................................................................................................6 1.4.3 Dimensions ...............................................................................................................................7 1.5 Features...................................................................................................................................................8 1.5.1 Battery ......................................................................................................................................8 1.5.2 CPU ........................................................................................................................................11 1.5.3 Memory & Calendar ...............................................................................................................11 1.5.4 Keypad....................................................................................................................................13 1.5.5 LCD ........................................................................................................................................16 1.5.6 Status LED..............................................................................................................................19 1.5.7 Speaker ...................................................................................................................................19 1.5.8 Vibrator ..................................................................................................................................19 1.5.9 Reader.....................................................................................................................................20 1.5.10 Wireless Support...................................................................................................................22 1.5.11 Resistance .............................................................................................................................22 ii Contents CHAPTER 2 - Installation 23 2.1 Main & Backup Batteries .....................................................................................................................24 2.2 Hand Strap ............................................................................................................................................26 2.3 Pistol Grip.............................................................................................................................................27 2.4 Cradle....................................................................................................................................................28 2.4.1 Status Indicators .....................................................................................................................28 2.4.2 Communication Ports .............................................................................................................29 CHAPTER 3 - Windows CE Basics 31 3.1 General..................................................................................................................................................32 3.1.1 Device Configuration .............................................................................................................33 3.1.2 Turn On/Off............................................................................................................................34 3.1.3 Desktop Window ....................................................................................................................34 3.1.4 Input Methods.........................................................................................................................38 3.2 System Reset.........................................................................................................................................39 3.2.1 Soft Reset................................................................................................................................39 3.2.2 Hard Reset ..............................................................................................................................39 3.3 Firmware Update ..................................................................................................................................40 3.4 ActiveSync with a Computer ................................................................................................................41 3.5 Quick Launch a Program ......................................................................................................................42 3.5.1 Add a Program........................................................................................................................42 3.5.2 Add a Subfolder......................................................................................................................45 3.5.3 Exit a Program........................................................................................................................46 3.5.4 Switch between Programs.......................................................................................................46 3.6 Install a New Program ..........................................................................................................................47 3.6.1 Add/Remove Programs...........................................................................................................47 3.6.2 Copy & Paste ..........................................................................................................................47 3.7 Uninstall a Program ..............................................................................................................................48 3.7.1 ActiveSync: Add/Remove Programs ......................................................................................48 3.7.2 Control Panel > Remove Programs ........................................................................................48 3.8 Backup & Restore Programs.................................................................................................................50 CHAPTER 4 - Configuration 51 4.1 General Settings....................................................................................................................................51 4.2 Connections ..........................................................................................................................................54 4.2.1 USB Connection .....................................................................................................................56 4.2.2 AX88772 (Ethernet) ...............................................................................................................57 4.2.3 WLAN ....................................................................................................................................58 4.2.4 BTPAN ...................................................................................................................................62 CHAPTER 5 - Applications 63 5.1 Wireless Power Manager ......................................................................................................................64 5.2 Bluetooth Manager ...............................................................................................................................65 5.2.1 Start Bluetooth Services .........................................................................................................65 5.2.2 Inquiry ....................................................................................................................................70 5.2.3 Pair..........................................................................................................................................71 5.2.4 Connect...................................................................................................................................73 5.2.5 Stop Bluetooth Services..........................................................................................................77 Contents iii 5.3 ReaderConfig ........................................................................................................................................78 5.3.1 Configure Reader Settings......................................................................................................79 5.3.2 1D Reader - CCD / Laser........................................................................................................80 5.3.3 1D Reader - (Extra) Long Range Laser ..................................................................................89 5.3.4 2D Reader...............................................................................................................................96 5.3.5 RFID Reader.........................................................................................................................106 5.4 Inbox ...................................................................................................................................................107 5.4.1 Create an E-mail Box ...........................................................................................................107 5.4.2 Synchronize Inbox................................................................................................................110 Specifications APPENDIX I - Comparison of Scan Modes 111 113 iv Contents Table of Figures Figure 1: Nomenclature (front & back) .....................................................................................5 Figure 2: Nomenclature of accessories .......................................................................................6 Figure 3: Dimensions ...................................................................................................................7 Figure 4: 27-key layout ..............................................................................................................13 Figure 5: DIP switch for backup battery pack ........................................................................24 Figure 6: Installing battery pack ..............................................................................................25 Figure 7: Installing hand strap .................................................................................................26 Figure 8: Installing pistol grip ..................................................................................................27 Figure 9: Cradle LEDs ..............................................................................................................28 Preface 1 Delivered in the same form factor of the 9500PPC Series running Windows Mobile 2003SE, the 9500CE Terminal Series is the newest member to the Mobile Computer family. As suggested by its model designation, it is designed to run Windows CE 5.0, and therefore, allows more flexibility in customization of applications. CipherLab has integrated powerful utilities for data collection, processing, and transmission. Its large color transflective TFT display guarantees ease in reading in all lighting conditions. Built-in with Bluetooth and 802.11b/g technologies, delivers a total wireless solution. The 9500CE Terminal Series is robust in construction to meet industry grade requirements, and has been found durable and resistant to shock, water, and dust. It is specifically designed for all-day, everyday use as well as for data-intensive applications in harsh environments. This manual serves to guide you through how to install, configure, and operate the terminal. The Care & Maintenance section is specifically prepared for those who are in charge of taking care of the terminal. We recommend you to keep one copy of the manual at hand for quick reference or maintenance purposes. To avoid any improper disposal or operation, please read the manual thoroughly before use. Thank you for choosing CipherLab products!
C H A P T E R 1 Introduction 3 This chapter explains the hardware parts and features of the 9500CE Terminal terminal. 1.1 Unpacking the package The following items are included in the package. Save the box and packaging material for future use in case you need to store or ship the terminal. 9500CE Terminal
Rechargeable Li-ion battery pack
Hand strap
Stylus Software CD (this Reference Manual is included) Note: For battery charging, you will need to purchase a charging cradle separately. 1.2 Options There are a number of optional accessories to enhance the total performance of the terminal. Refer to related sections for details on installation. Accessories Reader Features... One scan engine:
1D - CCD, Laser, Long Range Laser, Extra Long Range Laser And/or the RFID reader Rechargeable Battery Pack Rechargeable Li battery for non-stop operation Pistol Grip, Detachable Facilitating scanning with one hand Charging & Communication Cradle Charging of the terminal and one spare battery at the same time while transmitting/receiving data. 4 9500CE Terminal Reference Manual 1.3 Product Highlights 520 MHz Intel PXA270 processor
Microsoft Windows CE 5.0 software for operating system
A color transflective TFT display delivers excellent visibility in all lighting conditions
128 MB non-volatile NAND flash memory to store OS and software programs
(part of the free space is used as a storage card called DiskOnChip) 128 MB SDRAM to store and run programs, as well as store program data
Ergonomic design, ruggedized yet streamlined, with hand strap for secure hold
Built tough to survive harsh environments - splash, dust & drop resistant
Dual mode support - One scan engine (integrated barcode scanner/imager) plus one RFID reader
Wireless connectivity includes Bluetooth and 802.11b/g
Accessories and peripherals include pistol grip, international AC charging cradle, etc. Programmable feedback includes speaker and vibrator Chapter 1 5 1.4 Nomenclature 1.4.1 9500CE Terminal Figure 1: Nomenclature (front & back) 6 9500CE Terminal Reference Manual 1.4.2 Accessories & Peripherals Figure 2: Nomenclature of accessories Chapter 1 7 1.4.3 Dimensions Figure 3: Dimensions 8 9500CE Terminal Reference Manual 1.5 Features 1.5.1 Battery Main Battery
This rechargeable 3.7 V/4000 mAh Li-ion battery pack serves as the main power.
Normally, it takes approximately four hours to fully charge the battery. The charging time may vary by working condition.
During normal operation, the terminal can work for up to 16 hours. Warning:
Using backlight, wireless connectivity, and peripherals while on battery power will substantially reduce battery life. Backup Battery
The backup battery takes charge when the main battery is removed or drained out.
If fully charged, it will help retain data in SDRAM and maintain the system running in suspend mode for at least 30 minutes without the main battery. In the meantime, you have to replace the main battery as soon as possible. Battery Charge
Initial Charging The main and backup batteries may not be charged to full for shipment. When you first receive the package, you will need to charge batteries to full before using the terminal. Note: To charge the batteries for the first time, it requires approximately 8 hours. After the initial charging, it takes only 4 hours to charge the batteries to full. Because the internal backup battery is constantly charged from the main battery, the initial charging requires installing the battery pack to the terminal and then seating the terminal in the cradle for charging. This will have both the main and backup batteries charged at the same time. Note: To charge the backup battery, make sure that you slide the DIP switch inside the battery compartment to the ON position. Chapter 1 9
Caution of Low Battery Charge The battery pack is the only power source for the terminal to work. It also charges the backup battery so that the data stored in SDRAM can be retained properly. Therefore, when the main battery charge goes low, replace the battery pack with a charged one or seat it in the cradle for charging as soon as possible. Always save data before it is too late. Warning:
Data loss may occur with SDRAM during low battery condition. Always save data before running out of power or keep a fresh battery for replacement.
Battery Status Icons Status Icons Description Main battery is low. Main battery is very low. Backup battery is low. Backup battery is very low. Main battery is charging. Power Properties The system can be set to three different states to conserve power:
User Idle state
System Idle state
Suspend state Start > Settings > Control Panel and double-tap the Power icon 1. In the Battery tab, you can always monitor the charging status. 2. Tap the Schemes tab. 3. Select the desired power scheme and options for suspending operation when not in use. The time choices represent the amount of time that must pass before the system will switch to the next power conservation state. 10 9500CE Terminal Reference Manual To conserve more power, you may go to Start > Settings > Control Panel and double-tap the Display icon to configure the backlight setting. Chapter 1 11 1.5.2 CPU Built to run Windows CE 5.0, the 9500CE Terminal terminal is equipped with an Intel X-Scale 520 MHz RISC microprocessor. 1.5.3 Memory & Calendar Read-only Memory (ROM)
A total of 128 megabytes flash memory.
Mostly, it is for storing OS (Windows CE 5.0) and custom application programs.
Yet a small portion of the memory is referred to as DiskOnChip, which can store data and programs that you wish to retain even after a hard reset. Random-access Memory (RAM)
A total of 128 megabytes SDRAM.
Its contents will be retained by the backup battery. It is used for storing and running programs, as well as storing program data. Calendar
Equipped with a calendar chip for accurate time/date logging.
Non-stop operation is provided through the backup battery. Caution of Data Loss When the main battery is removed or drained out, the backup battery is to retain the contents of SDRAM and maintain the OS in suspend mode for at least 30 minutes, on condition that the backup battery has already been fully charged. If the terminal is to be put away for a couple of days, you should be aware that data loss occurs when both the main and backup batteries discharge completely. It is necessary to backup data and files before putting away the terminal. 12 9500CE Terminal Reference Manual System Properties - Memory tab Start > Settings > Control Panel and double-tap the System icon 1. In the Memory tab, it displays the current capacity and usage of the 128 MB onboard SDRAM. (Left below) 2. You may tap, hold, and drag the slider to re-allocate the memory. SDRAM Storage memory (left) Program memory (right) 128 MB onboard It refers to the memory allocated for file and data storage. It refers to the memory allocated for running programs. DiskOnChip Properties
(Desktop) My Device > DiskOnChip
Tap and hold the DiskOnChip icon and select Properties from the pop-up menu.
In the Properties tab, it displays the current capacity and usage of DiskOnChip. (Right below)
The DiskOnChip is part of the onboard 128 MB flash memory. Because the flash memory is non-volatile, data or programs stored in DiskOnChip will not be erased after a hard reset. Chapter 1 13 1.5.4 Keypad The terminal is equipped with a physical keypad that consists of 27 keys. Silicon rubber has been chosen for their durability and prompt feedback. The layout of the 27-key keypad includes alphanumeric, assorted characters, etc. This keypad is set to numeric mode by default. Figure 4: 27-key layout Note: Functionality of keys is application-dependent. 14 9500CE Terminal Reference Manual Keypad Settings first, and then
The LED backlight of keypad is turned off by default. It can be toggled ON/OFF by the key combination: [Func] + [0]. Start > Settings > Control Panel and double-tap the Keyboard icon
The Character Repeat functionality is enabled by default. You may cancel the check box to disable it. When enabled, tap, hold, and drag the slider for a desired Repeat Delay and Repeat Rate. Warning:
Using backlight while on battery power will substantially reduce battery life. It is suggested to turn on the keypad backlight while working in a dark area. Task Key The [Task] key on the keypad is set to trigger Windows Explorer. To launch Windows Explorer, press on the keypad. Alpha Key This alphanumeric keypad is set to numeric mode by default. The Alpha key serves as a toggle among numeric, alpha (lower-case alphabetic), and ALPHA (upper-case alphabetic) modes. Note: It is not necessary to hold down the [Alpha] key. The alpha icon will appear on the status bar in a sequence as shown below. Status Icon Alpha Key N/A Press one time Press two times Input Mode Numbers Small letters Capital letters Note: If you are using the software keypad via SIP, tap CAP (Caps Lock) to toggle between upper case and lower case alphabetic modes. Chapter 1 15 Func Key The [Func] (function) key serves as a modifier key. 1. To enable this modifier key, press on the keypad. A circular icon of the letter "F" will appear on the status bar. This modifier key is hold down as long as the icon is displayed. 2. Now press another key to get the value of key combination (say, press [1] to get the value of F1). The icon will go off now. 3. To get the value of another key combination modified by the [Func] key, repeat the above steps. 4. To abort the key modification, press again, and the icon will go off. Note: It is not necessary to hold down the [Func] key. The functionality of each key combination is application-dependent. Below is a list of the factory setting for a variety of key combinations. Press first, and then press one of the following keys for a specific function:
Key Combination Action PgUp (red-coded): move text up one screenful PgDn (red-coded): move text down one screenful Home (red-coded): move to the beginning of screen or document End (red-coded): move to the end of screen or document Toggle ON/OFF the backlight of keypad only Turn ON the backlight of LCD and decrease its luminosity Turn ON the backlight of LCD and increase its luminosity 16 9500CE Terminal Reference Manual 1.5.5 LCD The terminal comes with a 3.5 TFT graphic LCD, 240 by 320 pixels resolutions. The LED backlight of screen, which helps ease reading under dim environments, can be controlled manually and automatically. Warning:
Using backlight while on battery power will substantially reduce battery life. It is suggested to dim the backlight while working in a well-lit area or automatically turn off the terminal when not in use. LCD Settings first, and then
The LED backlight of the screen can be turned on and adjusted decreasingly by the key combination: [Func] + [].
It is not necessary to hold down the [Func] key; keep pressing the [] key until the luminosity is decreased to a desired level. first, and then
The LED backlight of the screen can be turned on and adjusted increasingly by the key combination: [Func] + [].
It is not necessary to hold down the [Func] key; keep pressing the [] key until the luminosity is increased to a desired level. Display Properties Start > Settings > Control Panel and double-tap the Display icon 1. Tap the Backlight tab. (Left below) 2. Select one or both of the check boxes to automatically turn off the LCD backlight when using batteries or external power. From the appropriate list, select the amount of time the device should be idle before the backlight is turned off. 3. Then, tap the [Advanced] button. (Right below) 4. In the Settings tab, you can select the luminosity of backlight when it is set to be automatically turned on by pressing any key or tapping the screen. Tap, hold, and drag the slider for AC and battery powered respectively. For more luminosity, move the slider to the right. Chapter 1 17 To conserve more power, you may go to Start > Settings > Control Panel and double-tap the Power icon to configure the power-saving setting. 18 9500CE Terminal Reference Manual Stylus Properties This LCD is also a touch screen that can be calibrated through screen alignment. Warning:
DO NOT use any pointed or sharp objects to move against the surface of the screen. Start > Settings > Control Panel and double-tap the Stylus icon 1. Tap the Calibration tab. 2. Tap the [Recalibrate] button. Chapter 1 19 1.5.6 Status LED The tri-color LED on top of the [Scan] button is used to provide information on status of battery charging or Bluetooth connection. Tasks Low battery Terminal charging Charging done Charging error Bluetooth connection enabled Green LED Red LED Green & Red Blue
On
Flashing On
Flashing
On 1.5.7 Speaker The speaker, a low power transducer type, can be used for playing sounds applied to events in Windows and programs, as well as playing audio files such as .WAV files. In addition, it can be programmed for status feedback. 1.5.8 Vibrator The terminal is integrated with a vibrator, which is software programmable for feedback. This can be helpful when working in noisy environments. 20 9500CE Terminal Reference Manual 1.5.9 Reader A wide variety of scan engines is available for delivering flexibility to meet different requirements. Types of Reader 1D Barcode Reader Scan Engine
CCD (Long Range Imager)
Laser scan engine
Long Range Laser scan engine
Extra Long Range Laser scan engine (with aiming beam) 2D Barcode Reader 2D scan engine RFID Tags supported include:
Standard ISO 14443A ISO 14443B ISO 15693 ICODE (Phillips) Labels
Mifare Standard 1K
Mifare Standard 4K
Mifare Ultralight
Mifare DESFire
Mifare S50
SLE44R35 SLE66R35 SRIX 4K ICODE SLI SRF55V02S SRF55V02P
TI Tag-it HF-I
SRF55V10P ICODE Dual Mode Support The terminal allows the co-existence of one integrated scan engine and the RFID reader. Chapter 1 21 Symbologies Enabled Depending on the scan engine integrated (check the Active Device setting in ReaderConfig), the terminal is capable of scanning barcodes of a number of symbologies as shown below. If you need to scan barcodes that are encoded in a different symbology, use the ReaderConfig tool to enable the symbology first. Active Device Symbologies Enabled 1D Reader The scan engine can be CCD or Laser. Interleaved 25 Industrial 25
Code 39
Codabar
UPC / EAN
Code 93
Code 128 1D Long Range Laser The scan engine can be Long Range Laser or Extra Long Range Laser. Interleaved 25
Code 39
UPC / EAN
Code 128
RSS-14 2D Reader The scan engine can read linear and 2D barcodes. Interleaved 25
Code 39
UPC / EAN
Code 128
RSS-14
Data Matrix
MaxiCode
QR Code PDF417 Postal Codes 22 9500CE Terminal Reference Manual 1.5.10 Wireless Support The 9500CE Terminal terminal supports state-of-the-art wireless technologies, Bluetooth and 802.11b/g, so that it is able to send/receive data in real time in an efficient way. 1.5.11 Resistance Shock The terminal is designed for harsh industrial environments, and is proved to survive drop test by the following criteria:
Surface type:
concrete
Distance to surface:
1.5 meters
Drop times:
multiple Splash & Dust
The terminal is sealed against moisture and dust to industry standard IP 64. 6 = Totally protected against dust 4 = Protection against water sprayed from all directions. That is, limited ingress is permitted. Warning:
If additional memory card or peripheral is not factory-installed, the Ingress Protection rating of enclosures may not be the same as claimed. C H A P T E R 2 Installation 23 The terminal is designed for portable use, and it almost requires no installation except installing the battery pack and necessary auxiliary parts. Here are some tips and suggestions that ensure safe and comfortable experience with the terminal. Warning:
Read Important Safety Precautions before installation.
Battery Pack
- Prepare at least one spare battery pack, especially when on the road.
- Be cautious of low battery conditions.
- Turn off the backlight in a bright work area to save battery power.
- Always use proprietary CipherLab batteries for safety concern.
Hand Strap
- The hand strap is ideal for one-handed operation, which requires safe and convenient hold of the portable terminal.
- Always make sure the hand strap is well hooked and screwed to the back of the terminal.
Pistol Grip
- This contoured pistol grip enables intuitive trigger-and-scan operation, which is very helpful in scan intensive applications.
Cradle
- Capable of charging and communications at the same time.
- One terminal seat for terminal with battery pack installed.
- One spare battery compartment for a spare battery pack.
Communications
- Wired, making use of ActiveSync via the USB cradle or directly connecting to Ethernet networks.
- Wireless, making use of wireless technologies, embedded Bluetooth or 802.11b/g. 24 9500CE Terminal Reference Manual 2.1 Main & Backup Batteries When you first receive the package, the rechargeable functionality of the backup battery is turned off. It is controlled by a DIP switch inside the battery compartment as shown below. For shipping and storage purposes, save the terminal and the main battery in separate packages, and slide the DIP switch to the OFF position (to your right). This will keep both batteries in good condition for future use. Note: Any improper handling may reduce the battery life. Figure 5: DIP switch for backup battery pack 1. Use the stylus (or a sharp-pointed object, such as a pencil) to slide the DIP switch to the ON position (to your left). Now the internal backup battery can be charged by the main battery. Chapter 2 25 2. Slide the battery pack into the battery compartment at a proper angle (30~45) so that the tabs on the bottom of the battery are hooked in the grooves of the compartment. Make sure that the battery is snugly fit into the compartment. 3. Hold the terminal still and slide the battery latch to lock the battery in the compartment. Note: For a new battery, make sure it is fully charged before use. Figure 6: Installing battery pack 26 9500CE Terminal Reference Manual 2.2 Hand Strap When a hand strap is necessary, install it to the terminal by following the steps:
1. Place the terminal face down on a flat and clean surface. 2. Screw one end of the hand strap to the shield-like cover on the back of the terminal. 3. Insert and hook the other end of the hand strap to the bottom of the terminal. 4. Make sure the hand strap is securely attached to the terminal. 5. Adjust the length of the hand strap to suit your handbreadth. Figure 7: Installing hand strap Chapter 2 27 2.3 Pistol Grip When a pistol grip is necessary, install it to the terminal by following the steps:
1. Place the terminal face down on a flat and clean surface. 2. Remove the shield-like cover on the back of the terminal by unscrewing. If there is a hand strap installed, remove it first. Keep the cover and screws for future use when the pistol grip is not desired. 3. Connect the power connector from the pistol grip to the receptacle on the terminal. 4. Screw the pistol grip to the shield-like cover. 5. Make sure all screws are tightened up but not over-tightened to damage the threads. 6. Turn on the terminal and test the trigger. Figure 8: Installing pistol grip 28 9500CE Terminal Reference Manual 2.4 Cradle The cradle is designed for charging and communications at the same time. 1. Place the cradle on a flat and clean surface. 2. Connect the line of the power adaptor to the power jack on the back of the cradle. 3. Connect the power adaptor to a suitable power outlet. 4. The cradle is ready for charging the terminal (loaded with main battery) and one spare battery pack. Seat the terminal and/or the spare battery pack then. 5. If data communications are desired at the same time, a USB connection must be established as well. Make sure that you have Microsoft ActiveSync installed on your computer before you connect the USB cable from the cradles USB Client port (
your computer. Refer to ActiveSync with a Computer.
) to 2.4.1 Status Indicators Figure 9: Cradle LEDs Chapter 2 29 Front Panel LEDs Tasks Indication of connection status
Spare battery charging status Solid red Charging Solid green Charging done Flashing (red/green) Error occurs Off Battery not ready Link / Data: Network status Solid green Ethernet connected over Ethernet Flashing Transmitting / Receiving data POWER:
Cradle power Solid green Off Power on Power off Warning:
Charging error may occur due to a power failure or defected battery contacts. 2.4.2 Communication Ports Ports (from left to right) Purpose USB Client port This port is provided for connecting to your computer for the use of ActiveSync application. USB Host port This port is provided for connecting a USB device:
Keyboard
Mouse
Card reader
Storage device, such as a memory stick Ethernet port This port is provided for connecting to a legacy network. When connected, the third LED (next to POWER) will become solid green. During data transmission, the LED will be flashing. C H A P T E R 3 Windows CE Basics 31 This chapter mainly describes the basic skills to work with the 9500CE Terminal terminal. The add-on utilities for applications regarding data collection, processing, and transmission, are introduced in the following chapters. The 9500CE Terminal terminal is specifically designed for real-time data collection in the Windows CE 5.0 environment. It won't take long for any Windows user to get familiarized with it. Keep these two basic skills in mind and explore this Windows CE device at ease.
Double-tap an item to select it.
Tap and hold an item to see a menu that enables tasks, such as cut, copy, rename, delete, etc.
Tap and drag to select multiple items. when it is To close an active window, a dialog box, or a running application, tap available on the toolbar. If the Close button is not displayed, press [ESC] on the physical keypad to exit. or To save current settings and exit, tap when it is available on the toolbar. 32 9500CE Terminal Reference Manual 3.1 General When the 9500CE Terminal terminal is fully charged, you may remove it from the cradle. Then turn on the terminal and wait for the Windows CE desktop to come up. If you are using the terminal for the first time, there are a couple of things to do after the desktop comes up.
To select your time zone and set the local time: Start > Settings > Control Panel, and double-tap the Date/Time icon.
To align the touch screen: Start > Settings > Control Panel, and double-tap the Stylus icon.
To obtain essential system information, go to Start > Settings > Control Panel, and double-tap the System icon. Select the Device Name tab to change the identification for the terminal. Chapter 3 33 3.1.1 Device Configuration The device configuration of 9500CE Terminal is displayed in 5 digits: xxxx-x Take the screenshot of System Properties above for example. Its device configuration is 5410-0, which means the 27-key terminal has equipped with the following parts:
A scan engine that employs extra long range laser
An integrated Bluetooth module and an optional Wi-Fi module
An RFID reader Device Code Modular Component Types 1st digit Reader module 0= none 1= CCD scan engine 2= Laser scan engine 3= 2D scan engine 4= Long Range Laser scan engine 5= Extra Long Range Laser scan engine 2nd digit Wireless module 4= Bluetooth + 802.11b/g 5= Bluetooth only 3rd digit RFID module 0= none 1= RFID reader 4th digit 5th digit Reserved
Keypad module 0= 27-key 34 9500CE Terminal Reference Manual 3.1.2 Turn On/Off Like your PDA, Pocket PC and most handheld devices, the 9500CE Terminal terminal functions when it is turned on. This is because the Windows CE operating system eliminates the booting process and runs continuously. Turn On (= Resume from Suspend) To turn on the terminal, simply press the [Power] key. Turn Off (= Suspend) To turn off the terminal, press the [Power] key again, or select Suspend from the Start Menu. The system is now ready for use but not in use. This is referred to as Suspend mode or Standby mode. It means the system is in power-saving status and waiting for user interference. Warning:
To save battery power, it is suggested that the terminal is set to be automatically turned off when not in use. Refer to the Power Management section for more information about saving power. 3.1.3 Desktop Window The desktop appears when the terminal is turned on (left below). Tap and hold on the blank area to manage or configure the desktop (right below). Chapter 3 35 Alternatively, you may tap to the right of the taskbar, and then select Desktop. Note: To customize the desktop, tap on the blank area of desktop and select Properties. When you turn on the terminal and seat it in the cradle for the first time, you will find the following icons displayed on the taskbar:
: This icon shows that your cradle is directly connected to a computer via USB port. Make sure you have Microsoft ActiveSync installed on your computer.
: There will be two of this icon, one is for BTPAN1 disabled, the other for AX88772
(Ethernet) disabled.
This icon is a shortcut to the Wireless Power Manager that controls the power to 802.11b/g modules.
: This icon shows that the charging progress is ongoing.
: This icon shows that numeric mode is in use for data input via keypad. Start Menu Tap the Start button on the taskbar to open the Start Menu. Options Programs Description Provides access to available programs in the directory:
36 9500CE Terminal Reference Manual Favorites Documents
\Windows\Programs Provides access to your favorites in the directory:
\Windows\Favorites Provides access to recent opened documents in the directory:
\Windows\Recent Settings Provides access to
Control Panel
Network and Dial-up Connections
Taskbar and Start Menu Run Suspend Runs a program or application. Enters the Suspend mode. Note: To configure the Start menu and taskbar, go to Start > Settings and select Taskbar and Start Menu. Taskbar The taskbar is at the bottom of the screen for displaying the Start button, up to 6 status icons for various connections or programs, SIP button, Switch Task button, etc. Note: To configure different connections, go to Start > Settings and select Network and Dial-up Connections. Icons Description Connected via USB The USB connection for ActiveSync operation is successfully established.
Double-tap it to view status. Tap [Disconnect] if necessary. BTPAN1 The Bluetooth PAN connection fails. (= disconnected) The Bluetooth PAN connection is successfully established through the Bluetooth Manager utility.
Double-tap it to view or renew IP Information. Ethernet via The Ethernet connection via AX88772 fails. (= disconnected) Chapter 3 37 cradle Wireless Power Manager The Ethernet connection via AX88772 is successfully established once the Cat. 5 cable is connected.
Double-tap it to view or renew IP Information. It provides control of the power to the 802.11b/g.
Double-tap any of these icons to configure the power setting. It indicates the Wi-Fi module (802.11b/g) is enabled. See WLAN1 status icons below. WLAN1 The Wi-Fi connection fails. (= disconnected)
Double-tap it to access the Wireless Information tab for establishing a new connection. The Wi-Fi connection is successfully established.
Double-tap it to view or renew IP & Wireless Information. Bluetooth Manager It provides access to the Bluetooth services.
Initially, you need to double-tap the Bluetooth Manager shortcut on the desktop so that this icon will appear on the taskbar. ReaderConfig It provides access to the reader configuration utility.
Initially, you need to double -tap the ReaderConfig shortcut on the desktop so that this icon will appear on the taskbar. Software Input Panel (SIP) Switch Task Tap it to change input method. Tap it to switch to desktop or any task, such as a running program or window. 38 9500CE Terminal Reference Manual 3.1.4 Input Methods Data entry can be performed by the following methods:
Type with the 27-key physical keypad
Scan barcode or RFID tag in applications, e.g. WordPad, CipherLabs Application Generator, etc.
Tap or write using SIP (Soft Input Panel) Soft Input Panel (SIP) Tap the SIP button on the taskbar to select a SIP mode or hide the input panel. In each mode, the characters appear as typed text on the screen. SIP Options Keyboard Transcriber Action To type using the virtual keyboard. To write freely on the screen in applications, such as WordPad, Inbox, etc. Chapter 3 39 3.2 System Reset Reset the 9500CE Terminal terminal when it stops responding to input. Soft reset: Simply press the [Reset] button.
Hard reset: Press the [Reset] button and the [Power] key at the same time. Warning:
Never perform a hard reset unless a soft reset cannot solve your problems. 3.2.1 Soft Reset A soft reset, also known as a warm boot, will restart the terminal and keep all the saved files. To perform a soft reset, use the stylus to press the [Reset] button. During operation, the removal of battery pack will start a soft reset too. Warning:
Data loss may occur when files are not properly closed before a soft reset. 3.2.2 Hard Reset A hard reset, also known as a cold boot, will restart the terminal too. However, it performs a full restore of the terminal to its factory settings and initializes SDRAM. To perform a hard reset, press the [Power] key and [Reset] button at the same time. Data and program files stored in SDRAM will be erased after a hard reset. But you can restore data that is previously synchronized with your computer by performing an ActiveSync operation. Warning:
Only the files stored in the Flash File System are retained during a hard reset. 40 9500CE Terminal Reference Manual 3.3 Firmware Update Firmware update should be performed with great caution because everything on the terminal will be erased. Backup user-installed applications and files to your computer first. The firmware update utility is available on the CD-ROM. To re-install or upgrade the operating system (image file) on your terminal, run the installer AP.exe from the CD-ROM. It will create a shortcut of the program DLDR.exe on the desktop of your computer. 1. Install Microsoft ActiveSync on your computer. Refer to section 3.4 for initial ActiveSync operation. Then, disable the ActiveSync operation as shown below. 2. Run the installer AP.exe from the CD-ROM. 3. Perform a hardware reset on the 9500CE Terminal terminal. 4. For the terminal to enter the Download mode, press [Space] + [8] + [Power]
simultaneously in three seconds. 5. Seat the terminal in the cradle. 6. Run the Image Download program (DLDR.exe) on your computer. Chapter 3 41 7. Press [Enter] on the terminal to start image update. It will take approximately 5 minutes to update the image. A message will be displayed on the terminal to indicate the firmware update is completed successfully. 8. Perform a hardware reset on the terminal again. Warning:
Do not press any key on the terminal while updating OS image. Once firmware update is completed, you cannot reload any older image. 3.4 ActiveSync with a Computer ActiveSync is used to synchronize information between the terminal and PC, to install programs on the terminal, and to backup and restore the terminal. The Microsoft ActiveSync program has to be installed on your desktop computer first.
To download the up-to-date version of the program, you may need to go to Microsoft's official web site for Windows Mobile devices as shown below. http://www.microsoft.com/windowsmobile/default.mspx
After downloading and installation, run the program. For detailed information on the program, you may click the Help menu, and then select the Microsoft ActiveSync Help. Note: We recommend that you have ActiveSync 3.7.1 installed on your computer because ActiveSync 4.x does not officially support Windows CE 5.0 devices. 1. Follow these instructions for initial ActiveSync operation:
Connect the USB cable from the cradles USB Client port (
) to your computer.
Connect the power cable from the cradle to a nearby power outlet.
Turn on the 9500CE Terminal terminal and seat it in the cradle. 2. Your computer will automatically detect the USB device. Click [OK] when the connection is established. 3. Select which partnership to set up. If you want to synchronize data between 9500CE Terminal and your computer, select Standard Partnership; otherwise, select Guest Partnership. 4. Wait a few seconds for 9500CE Terminal to get connected (and synchronized if a Standard Partnership is selected). 42 9500CE Terminal Reference Manual 3.5 Quick Launch a Program Tap the Start button to view the Start Menu. To quick launch a program, tap it from the Programs folder. Note: Alternatively, you may tap Start and select Run to run a specific program or open a document. To add a new program or subfolder to the Programs folder, you can either use Windows Explorer or ActiveSync.
Windows Explorer: to move the program by [Copy] and [Paste Shortcut].
ActiveSync on the desktop computer: to create a shortcut to the program, and place the shortcut in the Programs folder. Warning:
To avoid making any changes to the program configurations by accident, we recommend you to use [Copy] and [Paste Shortcut] rather than [Cut]
and [Paste]. 3.5.1 Add a Program If you wish to quick launch a new program, add it to the Programs folder: My Device\Windows\Programs Using Windows Explorer 1. Go to Start > Programs, and select Windows Explorer. Alternatively, you can press the [Task] key on the keypad to launch Windows Explorer. 2. Navigate through file folders to find the program you desire. Chapter 3 43 3. Tap and hold the program, and then tap [Copy] on the pop-up menu. 4. Navigate to the Programs folder (My Device\Windows\Programs). 5. Tap and hold anywhere blank on the screen. Then tap [Paste Shortcut] on the pop-up menu. The new program will be added to the Programs folder. 6. Go to Start > Programs and the new program will appear now. 44 9500CE Terminal Reference Manual Using ActiveSync on PC 1. When connected, open the Microsoft ActiveSync window on your desktop computer. 2. Click the Explorer button from the toolbar. 3. Navigate through file folders to find the program you desire. 4. Right-click the program, and then select [Create Shortcut] on the pop-up menu. 5. Right-click the shortcut, and then select [Cut] on the pop-up menu. 6. Navigate to the Programs folder (My Device\Windows\Programs). 7. Right-click anywhere blank on the window. Then select [Paste] on the pop-up menu. The new program will be added to the Programs folder. 8. On the terminal, go to Start > Programs and the new program will appear now. Note: [Create Shortcut], [Cut], and [Paste]: The same result can be performed by [Copy]
and [Paste Shortcut]. Chapter 3 45 3.5.2 Add a Subfolder Using Windows Explorer 1. Go to Start > Programs, and select Windows Explorer. Alternatively, you can press the [Task] key on the keypad to launch Windows Explorer. 2. Navigate through file folders to find where you wish to create a new folder. 3. Right-click anywhere blank on the window, and select [New Folder] from the pop-up menu. A subfolder will be created. Using ActiveSync on PC 1. When connected, open the Microsoft ActiveSync window on your desktop computer. 2. Click the Explorer button from the toolbar. 3. Navigate to the target folder where you wish to create a new folder. 4. Right-click anywhere blank on the window, and select [New Folder] from the pop-up menu. A subfolder will be created. 46 9500CE Terminal Reference Manual 3.5.3 Exit a Program In general, the system manages memory automatically, and there is no need to exit a program in order to open another or to conserve memory. However, random access memory
(SDRAM) may be used up when running too many programs. As a result, it will slow down the operation or cause program errors. In that case, you should stop one or more running programs to free memory. In order to use memory in a more efficient way, you are recommended to exit a program when it is not desired any longer. Warning:
Always remember to save data or settings before you exit a program. when it is To close an active window, a dialog box, or a running application, tap available on the toolbar. If the Close button is not displayed, press [ESC] on the physical keypad to exit. or Note: Some programs, such as the Bluetooth Manager, may create an associated icon on the taskbar. You may tap the icon and select [Exit] from the pop-up menu. To save current settings and exit, tap when it is available on the toolbar. 3.5.4 Switch between Programs Tap to the right of the taskbar, and then select a running program. Chapter 3 47 3.6 Install a New Program 3.6.1 Add/Remove Programs To install a program that is designed to be used on a mobile device running Windows CE, you may click [Add/Remove Programs] from the Tools Menu. 3.6.2 Copy & Paste Alternatively, you may install a new program manually. 1. When connected, open the Microsoft ActiveSync window on your desktop computer. 2. Click the Explorer button from the toolbar. 3. Navigate to the target folder, e.g. the Programs folder, depending on where you wish to access the program. 4. Navigate through file folders on your computer to find the new program. 5. Right-click the program and select [copy] on the pop-up menu. 6. Back to the target folder in step 3. Right-click anywhere blank and select [Paste] on the pop-up menu. 7. On the terminal, go to Start > Programs and the new program will appear. 48 9500CE Terminal Reference Manual 3.7 Uninstall a Program If a user program is no longer desired, you may remove it from the system. 3.7.1 ActiveSync: Add/Remove Programs To uninstall a program that is designed to be used on a mobile device running Windows CE, you may click [Add/Remove Programs] from the Tools Menu. 3.7.2 Control Panel > Remove Programs Alternatively, you may uninstall a new program manually. 1. Go to Start > Settings > Control Panel, and double-tap the Remove Programs icon. 2. Tap the name of the program that you want to delete. 3. Tap [Remove]. 4. Tap [Yes] to uninstall the program. Chapter 3 49 Note: If the program does not appear in the list of installed programs, you may use Windows Explorer to locate it. Tap and hold the program, and select [Delete]. 50 9500CE Terminal Reference Manual 3.8 Backup & Restore Programs To best protect your work, you should regularly back up information on your terminal. You can perform a backup by during the ActiveSync operation. The backup file is stored on your desktop computer. C H A P T E R 4 Configuration 51 In this chapter, a brief on the system settings is provided for your reference. Note: User settings are stored in SDRAM and will be overwritten by the system defaults after a hard reset. 4.1 General Settings Go to Start > Settings > Control Panel. 52 9500CE Terminal Reference Manual Items Description In the [Accessibility] dialog box, you may use these options to customize the way an external keyboard, display, or mouse functions. Many of these features are useful to people without disabilities
Keyboard tab: Select StickyKeys to enable simultaneous keystrokes while pressing one key at a time; select ToggleKeys to emit sounds when certain locking keys are pressed. Sound tab: Select SoundSentry to provide visual warnings for system sounds.
Display tab: Select High Contrast to improve screen contrast with alternative colors.
Mouse tab: Select MouseKeys to enable the keyboard to perform mouse functions
General tab: Select Automatic Reset if you wish to turn off accessibility features after a specific period of time; select Notification if you wish to hear a sound when turning a feature on or off. In the [Certificates] dialog box, you may view or modify digital certificates that some application use to establish trust for secure connections. In the [Date/Time] dialog box, you may change date, time, and time zone settings. In the [Display Properties] dialog box,
Background tab: Select an image for the background.
Appearance tab: Select a desired color scheme for windows, dialog boxes, and items.
Backlight tab: Specify for how long the terminal is idle and then the backlight will be automatically turned off while on battery power and external power (in the charging cradle) respectively. Tap the [Advanced] button to move the slider and adjust the brightness of the LCD backlight when it is set to be automatically turned on once a key is pressed or you tap the touch screen. In the [Input Panel Properties] dialog box, you may configure how the Soft Input Panel (SIP) works. In the [Internet Options] dialog box, you may configure how the terminal connects to the Internet. Connect an external keyboard to the cradle via the USB Host port. In the [Keyboard Properties] dialog box, you may configure settings for character repeat. Chapter 4 53 Connect a mouse to the cradle via the USB Host port. In the [Mouse Properties] dialog box, you may configure and test your double-click settings. In the [Network and Dial-up Connections] window, you may configure settings for the terminal connects to a network directly or through a modem. Alternatively, you may tap Start > Settings > Network and Dial-up Connections.
USB Connection (via USB client port on the cradle)
AX88772 (via Ethernet port on the cradle)
WLAN (via 802.11b/g)
BTPAN (via Bluetooth) In the [Owner Properties] dialog box, Identification/Notes tab: Enter your contact information or notes.
Network ID tab: Enter the user name, password, and domain name used to log on to the remote network. In the [Password Properties] dialog box, you may apply password protection to limit access to the terminal. In the [PC Connection Properties] dialog box, you may disable the direct connection between the terminal and a computer. By default, the terminal is enabled to directly connect to a computer via the cradles USB port. Alternatively, you may tap Start > Settings > Network and Dial-up Connections and select USB Connection. In the [Power Properties] dialog box,
Battery tab: You may view the current status of main and backup batteries.
Device Status tab: You may view the devices that are consuming power. Schemes tab: You may configure the power scheme and switching. In the [Regional and Language Settings] dialog box,
Region tab: You may customize the appearance and formatting to your geographic region.
Language tab: By default, it is set to English (United States).
Input tab: By default, it is set to English (United States)-US. In the [Remove Programs] dialog box, you may remove any program that is installed earlier. In the [Stylus Properties] dialog box,
Double-Tap tab: You may configure and test your double-tap settings.
Calibration tab: You may need to re-calibrate the touch screen if it is not responding properly to your taps. 54 9500CE Terminal Reference Manual In the [System Properties] dialog box,
General tab: You may view the system information.
Memory tab: You may move the slider and adjust the SDRAM allocation.
Device Name tab: You may enter a name and description for identifying the terminal.
Copyrights tab: You may view the important statements on copyrights. In the [Volume & Sounds Properties] dialog box,
Volume tab: You may move the slider and adjust the volume and select to play sounds for Events, Applications or Notifications.
Sounds tab: You may configure sounds for different Windows events. 4.2 Connections There are two ways to access the connections settings:
Go to Start > Settings > Control Panel and double-tap the Network and Dial-up Connections icon.
Go to Start > Settings > Network and Dial-up Connections. Chapter 4 55 Type of Connections Description This is a shortcut to USB Connection, and the selected interface is USB for factory setting. This connection is reflected in the control panel for direct PC connection. See Also Start > Settings >
Control Panel >
This is the control of Ethernet module AX88772, which is enabled by default. This is the control of 802.11b/g module for wireless local area networking (WLAN) connection, which is disabled by default. This is the control of Bluetooth module for wireless personal area networking (WPAN) connection, which is enabled by default. Toolbar Description Tap this button to open the Connection menu. The available options depend on the connection you select. Tap this button to toggle on/off the connection you select. The toggle is used for Enable/Disable or Connect/Disconnect. Tap this button to delete the connection you select. Tap this button to view the properties of the connection you select. See Also Tap and hold the icon of a desired connection type. Then, select from its associated menu. 56 9500CE Terminal Reference Manual 4.2.1 USB Connection Tap and hold on USB Connection.
Most options can be found in the Connection menu on the toolbar as well. When you select [Set as Default], the USB Connection will become the default connection used for browsing the Internet. Note: Please ignore [Properties] as the associated settings will not take effect. Connect / Disconnect The USB connection is specifically for performing the ActiveSync operation. Generally, it will automatically establish the connection and start the ActiveSync operation when you seat the terminal in the cradle. To stop the ActiveSync operation, simply remove the terminal. If you want to stop the ActiveSync operation without removing the terminal from the cradle, tap and hold on USB Connection, and select [Status]. Then, tap
[Disconnect] in the dialog box.
When connected, the status icon will appear on the taskbar.
When disconnected, this icon will disappear. Chapter 4 57 4.2.3 AX88772 (Ethernet) Tap and hold on AX887721. Enable / Disable Icons Description By default, the Ethernet module is enabled. When a Cat. 5 cable is connected, the status icon will become
. Tap and hold on AX887721, and select [Disable]. The status icon will disappear. Properties By default, DHCP is enabled, and therefore, there is no need to configure the IP settings. If you want to assign a static IP address to the terminal, tap and hold on AX887721, and then select [Properties]. Note: Only change these settings according to your network administrators instructions. 58 9500CE Terminal Reference Manual 4.2.4 WLAN Tap and hold on WLAN1. Connect / Disconnect 1. Turn on the power to the 802.11b/g module through the Wireless Power Manager. Its associated icon on the taskbar will become
. The WLAN1 dialog box appears for establishing a connection. Chapter 4 59 2. Select an access point or Wi-Fi enabled device, and tap the [Connect] button. For initial connection, the Wireless Properties dialog box will appear first. Tap [OK]
after configuration. 60 9500CE Terminal Reference Manual 3. Wait a few seconds for the terminal to connect to the selected network. 4. If you need to change the network settings, double-tap the selected network. The Wireless Properties dialog box appears as shown in step 2. Tap [OK] after configuration. For more network settings, tap the [Advanced] button on the Wireless Information tab. Chapter 4 61 Icons Description By default, the 802.11b/g module is disabled. No status icon. Enable the 802.11b/g module through the Wireless Power Manager. The on the taskbar will become
, and the status icon will icon appear. When successfully connecting to an access point or other Wi-Fi enabled device, the status icon will become
. Properties By default, DHCP is enabled, and therefore, there is no need to configure the IP settings. If you want to assign a static IP address to the terminal, tap and hold on WLAN1, and then select [Properties]. Note: Only change these settings according to your network administrators instructions. 62 9500CE Terminal Reference Manual 4.2.5 BTPAN Tap and hold on BTPAN1. Enable / Disable Icons Description By default, the Ethernet module is enabled. When the Bluetooth PAN service is connected through the Bluetooth Manager, the status icon will become
. Tap and hold on BTPAN1, and select [Disable]. The status icon will disappear. Properties By default, DHCP is enabled, and therefore, there is no need to configure the IP settings. If you want to assign a static IP address to the terminal, tap and hold on BTPAN1, and then select [Properties]. Note: Only change these settings according to your network administrators instructions. C H A P T E R 5 Applications 63 The 9500CE Terminal terminal provides several utilities and key applications which are made accessible from the desktop or the taskbar.
Wireless Power Manager lets you determine whether the power is supplied to the WLAN module, along with its associated driver installed.
Bluetooth Manager lets you configure the Bluetooth settings and use the Bluetooth services provided on the remote devices.
ReaderCfg lets you manage the barcode or RFID reader.
Inbox lets you send and receive e-mail by connecting to a POP3 or IMAP4 server. 64 9500CE Terminal Reference Manual 5.1 Wireless Power Manager Wireless Power Manager is a control panel applet, which allows you to choose and enable 802.11b/g. Note: Meanwhile, you may enable Bluetooth connectivity through the Bluetooth Manager. 1. Double-tap the associated icon on the taskbar to run Wireless Power Manager. 2. Select the wireless connectivity you desire, and then tap It takes several seconds to turn on the power to the wireless module and install the driver. When 802.11b/g are enabled on battery power, the main battery charge will drop down substantially. Double-tap any of the following icons to access power management. The icon indicates that 802.11b/g Power is turned on. Note: You may need to turn off the wireless power or simply stop the wireless signals at times, in order to conserve battery power, or in situations where the use of radio is prohibited, such as on airplanes, in hospitals, etc. Chapter 5 65 5.2 Bluetooth Manager Bluetooth Manager is a utility that helps you access and manage the available Bluetooth services efficiently. The supported Bluetooth profiles are:
Serial Port Profile File Transfer Profile
Object Push Profile
Dial-Up Networking Profile
Human Interface Device Profile PAN Service Profile
(SPP)
(OPP)
(FTP)
(DUN)
(PAN)
(HID) 5.2.1 Start Bluetooth Services 1. Double-tap the Bluetooth Manager shortcut on the desktop (left below). 2. It takes several seconds to enable the Bluetooth services. The associated icon appear on the taskbar. (right below) will 66 9500CE Terminal Reference Manual Note: To start Bluetooth PAN service, go to Start > Settings > Network and Dial-up Connections. Toolbar Buttons Description See Also Tap this button to view shortcuts to preferred Bluetooth services, which may be provided on different Bluetooth devices. Then tap a desired Bluetooth service to establish a quick link. You will have to make a connection and created a shortcut to a specific Bluetooth service first. Tap this button to view the Bluetooth devices discovered during this session.
If you tap the button for the first time, it will start the inquiry process to discover nearby Bluetooth devices. Tap this button to view the Bluetooth services provided.
By default, these services are all available, and therefore, displayed along with a plug icon
To view properties of a service, tap and hold it. Then select
[Properties].
To disable a service, tap and hold it. Then select [Stop]. If Auto Server COM Port is enabled Serial Port Properties If Auto Server COM Port is disabled, you can select a COM port by following these steps:
Chapter 5 67 File Transfer Properties You can change the FTP folder.
By default, uploading files to the terminal is allowed. You can cancel the check box to prohibit uploading. Object Push Properties You can change the Bluetooth exchange folder. Tap this button to view the Bluetooth properties. General tab It displays device name, MAC address, as well as the device type. 68 9500CE Terminal Reference Manual If you wish to change the device name of the terminal, go to Start >
Settings > Control Panel and select System. Security tab
Authentication Setting: It is disabled by default. When enabled, PIN code is required.
Discoverability: It is set discoverable by default. If you do not wish to provide Bluetooth services to other remote devices, cancel the check box.
Default PIN: It is disabled by default. You may set a link key to skip the PIN code input. Options tab
Start minimized: When selected, once you run the Bluetooth Manager program, its window will be minimized to an icon on the taskbar, which serves as a toggle to open or close the Bluetooth Manager window. It works the same as the Minimized button below.
Auto Client COM Port: When enabled, the default COM port for Chapter 5 69 remote Serial Port service will be assigned automatically. When disabled, you can select a COM port by selecting [Connect]:
Auto Server COM Port: When enabled, the default COM port for local Serial Port service will be assigned automatically. Tap this button to minimize the Bluetooth Manager window. Tap this button to exit the Bluetooth Manager. Tap this button to stop inquiring. Tap this button to refresh the deice list. When using the File Transfer service on a remote device, you can tap this button to move up one level if a subfolder exists. Tap this button to view the Bluetooth profiles supported:
SPP for Serial Port Profile
OPP for Object Push Profile
DUN for Dial-Up Networking Profile (supports Client only) FTP for File Transfer Profile Note that the terminal also supports the following profiles:
Human Interface Device (HID) Profile PAN Service Profile 70 9500CE Terminal Reference Manual 5.2.2 Inquiry 1. Tap to discover nearby Bluetooth devices. 2. It will list the discovered devices. Chapter 5 71 5.2.3 Pair When authentication is enabled on the target device, you will have to pair with it before starting a connection. 1. From the device list, tap and hold on the desired device and tap [Pair]. 2. Enter the PIN code that is specified on the remote device. 72 9500CE Terminal Reference Manual 3. Once paired successfully, the paired device will be displayed along with a lock icon
. Chapter 5 73 5.2.4 Connect 1. From the device list above, double-tap a device to find out the available Bluetooth services. 2. Tap and hold a desired Bluetooth service, e.g. Serial Port Service, to establish a connection. The connected service will be displayed along with a plug icon
. Tap [Connect] and then select a COM port when Auto Client COM Port is disabled in
. 74 9500CE Terminal Reference Manual 3. If you wish to add a service to the Q_Link list for establishing a quick connection in the future, tap and hold it, and then select [Create Shortcut]. Steps to access the Object Push service:
1. Tap and hold the Object Push service. 2. Select [Push file] to send a file or PIM item, e.g. a business card. 3. Choose the file you wish to send. Chapter 5 75 4. The terminal will start transferring the file. Steps to access the File Transfer service:
1. Tap and hold the File Transfer service. 2. Select [Connect] (and assign COM port if necessary). 3. Tap and hold on anywhere blank. Then, select [Add file]. 76 9500CE Terminal Reference Manual 4. Choose the file you wish to upload to the remote device. 5. The terminal will start transferring the file. 6. To download a file from the remote device, tap and hold on a desired file. Then, select [Get file]. Chapter 5 77 5.2.5 Stop Bluetooth Services Tap on the toolbar of the Bluetooth window to stop all Bluetooth connections. When the Bluetooth window is minimized, tap and hold on the taskbar, and then select [Exit]. Note: You may need to stop using the Bluetooth services, in order to conserve battery power, or in situations where the use of radio is prohibited, such as on airplanes, in hospitals, etc. To stop Bluetooth PAN service, go to Start > Settings > Network and Dial-up Connections. 78 9500CE Terminal Reference Manual 5.3 ReaderConfig ReaderConfig is the control applet and tool to manage the barcode and RFID readers integrated on the terminal. 1. Double-tap the ReaderConfig shortcut on the desktop. The associated icon will appear on the taskbar. 2. Tap and hold on the icon to access the menu that allows you to choose and enable one or both of the readers. There will be a check mark in front of the reader if it is enabled.
BC Reader: 1D or 2D
RFID Reader 3. To meet your application requirements, proceed to configure associated reader settings. Note: The program ReaderCfg will automatically detect the reader module(s) that is currently installed in the terminal. Chapter 5 79 5.3.1 Configure Reader Settings Tap and hold on enabled. Otherwise, it is disabled.
, and then select BC Reader or RFID Reader. If it is ticked, the reader is The default reader is BC Reader for reading barcodes. If the RFID Reader is installed, the option will be available. If you need to change the factory settings, select [Settings]. The reader configurations depend on the barcode reader installed. To identify the barcode reader, check inside the Active Device setting. Active Device 1D Reader Description The scan engine is CCD or Laser. 1D Long Range Laser The scan engine is Long Range Laser or Extra Long Range Laser. 2D Reader RFID The scan engine can read linear and 2D barcodes. The reader can read RFID tags. Note: (1) For barcode settings, click the 1D or 2D tab that is next to the General tab.
(2) For RFID settings, click the General tab and roll to the bottom of the list.
(3) If you wish to reload the default settings, delete the ReaderCfg.ini file in DiskOnChip. Default Barcode Reader is always enabled if exists. Sound 2 Sound 9 NO (Disabled) 2 seconds Keyboard Emulation 80 9500CE Terminal Reference Manual 5.3.2 1D Reader - CCD / Laser General tab Settings Active Device The scan engine can be identified and toggled. Only one scan engine can be disabled at a time. 1D Reader
RFID Good Read Beep Mute, or Sound 1~9 Warning Beep Mute, or Sound 1~9 Enable Vibrator YES or NO Vibrator Duration 1~30 (sec.) *Vibrator must be enabled. Data Output There are three options for data output after decoding:
Keyboard Emulation
Data is emulated as typed text and sent to the active Window. Simply run your application or Pocket PC built-in program, such as Pocket Excel, to start with data collection.
Windows Message
Data is encapsulated in a Windows message
(WM_COPYDATA). Retrieve the WM_COPYDATA message in your application. The decoded data is passed to your application through the lParam parameter.
Windows Event
- Whenever the reader reads a barcode, a Windows event object named DecodeEvent will be signaled and the data will be stored in the Windows message queue.
Need to create an event object named DecodeEvent in your application so that the ReaderCfg utility can signal your application using this event object. Call Windows API (ReadMsgQueue) in your application to retrieve the decoded data.
*Sample programs are provided for Windows Message
& Event programming. For details, please contact CipherLab technical support team. Chapter 5 81 Note: For the use of a different program rather than ReaderCfg, a dynamic-link library
(DLL) file is provided. Auto ENTER Auto ENTER Character Scan + ENTER This function can spare you the trouble of pressing the
[Enter] key on the terminal to confirm each scan. It will automatically add an ENTER character in front or to the end of one scan.
No
ENTER + Scan (efficient for continuous scanning) Scan + ENTER (time-saving)
*Auto ENTER must be enabled. Carriage Return
None
Carriage Return
Tab
Comma
Semicolon Space Prefix Code Suffix Code 0~10 characters 0~10 characters Include Cody Type YES or NO Include Cody Length YES or NO NULL NULL NO (Disabled) NO (Disabled) Scan Mode Refer to Appendix I Comparison of Scan Modes. Laser mode
Auto Off
Continuous
Auto Power Off
Alternate
Momentary
Repeat
Laser
Test
Aiming 1~255 (sec.) Select a desired level of reading (decoding) security. Comprise some speed for getting more security when necessary. For example, if None is selected, it only requires one successful decoding to make the reading valid. If Three times is selected, it needs to successfully decode three more times to make the reading valid.
None 3 seconds None Barcode Decode Timeout Barcode Read Redundancy 82 9500CE Terminal Reference Manual
One time
Two times
Three times Negative Barcode Normally, barcodes are printed with the color of the bars darker than that of the spaces. For negative barcodes, they are printed oppositely just like negative films. That is, the spaces of the negative barcodes are printed with the color darker than that of the bars.
YES or NO NO (Disabled) RFID Settings will be displayed if the RFID reader is installed!
Check reader status when start session When running the program, it will take a few seconds to check status of the reader, barcode reader or RFID reader, before starting the session. YES (Enabled)
YES or NO Chapter 5 83 1D tab: CCD / Laser Code 39 Supported on CCD / Laser Enabled or Disabled Default Enabled Transmit Start / Stop When enabled, the start / stop characters will be OFF (Disabled) included in the data being transmitted. Verify Checksum When enabled, the checksum verification will be performed in decoding. OFF (Disabled) If the checksum is incorrect, data will be rejected. Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Code 39 Full ASCII When enabled, Code 39 Full ASCII will be supported instead. All the alphanumeric and special characters are included. OFF (Disabled) Italian Pharmacode Supported on CCD / Laser Enabled or Disabled Transmit Start / Stop
*Share the setting of Code 39. Default Disabled Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) French Pharmacode Supported on CCD / Laser Enabled or Disabled Transmit Start / Stop
*Share the setting of Code 39. Default Disabled Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Industrial 25 Supported on CCD / Laser Enabled or Disabled Start / Stop Character The start / stop character of the selected barcode is included in the data being transmitted. Default Enabled Industrial 25 Industrial 25
Matrix 25 Interleaved 25 Verify Checksum When enabled, the checksum verification will be performed in decoding. OFF (Disabled) 84 9500CE Terminal Reference Manual If the checksum is incorrect, data will be rejected. Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Length Qualification The weak structure of some barcodes may cause a short scan error. This setting is used to prevent such an error by qualifying the allowable barcode length to ensure the correct barcode is read. Fixed Length (up to 2 lengths can be specified)
Max / Min Length By default, the terminal will only accepts those barcodes with lengths that fall between the maximum and minimum lengths; otherwise, data will be rejected. Maximum Length 0~127 characters Minimum Length 0~127 characters Interleaved 25 Supported on CCD / Laser Enabled or Disabled Start / Stop Character The start / stop character of the selected barcode is included in the data being transmitted. Max / Min Length 127 1 Default Enabled Interleaved 25 Industrial 25
Matrix 25 Interleaved 25 Verify Checksum When enabled, the checksum verification will be performed in decoding. OFF (Disabled) If the checksum is incorrect, data will be rejected. Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Length Qualification Refer to Industrial 25 above. Fixed Length
Max / Min Length Maximum Length 0~127 characters Minimum Length 0~127 characters Matrix 25 Supported on CCD / Laser Enabled or Disabled Start / Stop Character The start / stop character of the selected barcode is included in the data being transmitted.
Industrial 25 Interleaved 25 Max / Min Length 126 1 Default Disabled Matrix 25 Chapter 5 85
Matrix 25 Verify Checksum When enabled, the checksum verification will be performed in decoding. OFF (Disabled) If the checksum is incorrect, data will be rejected. Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Length Qualification Refer to Industrial 25 above. Fixed Length
Max / Min Length Maximum Length 0~127 characters Minimum Length 0~127 characters Codabar Supported on CCD / Laser Enabled or Disabled Start / Stop Character When enabled, the selected start / stop characters will be included in the data being transmitted. Max / Min Length 127 1 Default Enabled None abcd / abcd
None
ABCD / ABCD
ABCD / TN*E abcd / tn*e MSI Supported on CCD / Laser Enabled or Disabled Default Disabled Verify Checksum Using the selected calculation method, the checksum verification is performed in decoding. Single Modulo 10 If the checksum is incorrect, data will be rejected.
Single Modulo 10
Double Modulo 10
Modulo 11 & 10 Transmit Checksum Based on the selected conditions, the checksum Transmitted characters are included in the data being transmitted.
Last digit not transmitted
Transmitted
Last 2 digits not transmitted Length Qualification Refer to Industrial 25 above.
Fixed Length Max / Min Length 86 9500CE Terminal Reference Manual
Max / Min Length Maximum Length 0~127 characters Minimum Length 0~127 characters Plessey Supported on CCD / Laser Enabled or Disabled 127 0 Default Disabled Convert to UK Plessey When enabled, each occurrence of the character A will be converted to X. OFF (Disabled) Transmit Checksum The checksum characters (2 digits) are included in the data being transmitted. ON (Enabled) UPC-E Supported on CCD / Laser Enabled or Disabled Convert to UPC-A When enabled, the UPC-E reading will be expanded into UPC-A. It will then be processed according to the settings of UPC-A. Default Enabled OFF (Disabled) Transmit System Number When enabled, the system number will be included in the data being transmitted. OFF (Disabled) Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Transmit Addon 2 When enabled, UPC-E Addon 2 can be decoded too. OFF (Disabled) Transmit Addon 5 When enabled, UPC-E Addon 5 can be decoded too. OFF (Disabled) EAN-8 Supported on CCD / Laser Enabled or Disabled Default Enabled Convert to EAN-13 When enabled, the EAN-8 reading will be expanded OFF (Disabled) into EAN-13. It will then be processed according to the settings of EAN-13. Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Transmit Addon 2 When enabled, EAN-8 Addon 2 can be decoded too. OFF (Disabled) Transmit Addon 5 When enabled, EAN-8 Addon 5 can be decoded too. OFF (Disabled) EAN-13 Supported on CCD / Laser Enabled or Disabled Default Enabled Convert to ISBN When enabled, the EAN-13 reading that starts with 978 OFF (Disabled) Chapter 5 87 and 979 will be converted to ISBN. Convert to ISSN When enabled, the EAN-13 reading that starts with 977 will be converted to ISSN. OFF (Disabled) Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Transmit Addon 2 When enabled, EAN-13 Addon 2 can be decoded too. OFF (Disabled) Transmit Addon 5 When enabled, EAN-13 Addon 5 can be decoded too. OFF (Disabled) UPC-A Supported on CCD / Laser
*Share the setting of EAN-13. Convert to EAN-13 The UPC-A reading will be expanded into EAN-13. It will then be processed according to the settings of EAN-13. Default Enabled ON (Enabled) Transmit System Number The system number is included in the data being transmitted. ON (Enabled) Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Transmit Addon 2 Share the setting of EAN-13 Transmit Addon 5 Share the setting of EAN-13 OFF (Disabled) OFF (Disabled) Telepen Supported on CCD / Laser Enabled or Disabled Telepen Type
Telepen Numeric is supported by default.
Select AIM (Full ASCII) so that Telepen Full ASCII is supported. All the alphanumeric and special characters are included. RSS-14 Supported on CCD / Laser Enabled or Disabled Default Disabled Original
(Numeric) Default Disabled Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Transmit Application ID The Application ID is included in the data being transmitted. ON (Enabled) Transmit Code ID The Code ID (default to ]e0) is included in the data being transmitted. ON (Enabled) 88 9500CE Terminal Reference Manual RSS Limited Supported on CCD / Laser Enabled or Disabled Default Disabled Transmit Checksum The checksum character is included in the data being transmitted. ON (Enabled) Transmit Application ID The Application ID is included in the data being transmitted. ON (Enabled) Transmit Code ID The Code ID (default to ]e0) is included in the data being transmitted. ON (Enabled) RSS Expanded Supported on CCD / Laser Enabled or Disabled Default Disabled Transmit Code ID The Code ID (default to ]e0) is included in the data being transmitted. ON (Enabled) Code 93 Supported on CCD / Laser Enabled or Disabled Code 128 Supported on CCD / Laser Enabled or Disabled Default Enabled Default Enabled EAN-128 Supported on CCD / Laser Share the setting of Code 128 Transmit Code ID When enabled, the Code ID (default to ]C1) is included in the data being transmitted. Default Enabled OFF (Disabled) Chapter 5 89 Default Barcode Reader is always enabled if exists. Sound 2 Sound 9 NO (Disabled) 2 seconds Keyboard Emulation 5.3.3 1D Reader - (Extra) Long Range Laser General tab Settings Active Device The scan engine can be identified and toggled. Only one scan engine can be disabled at a time. 1D (Extra) Long Range Laser
RFID Good Read Beep Mute, or Sound 1~9 Warning Beep Mute, or Sound 1~9 Enable Vibrator YES or NO Vibrator Duration 1~30 (sec.) *Vibrator must be enabled. Data Output There are three options for data output after decoding:
Keyboard Emulation
Data is emulated as typed text and sent to the active Window. Simply run your application or Pocket PC built-in program, such as Pocket Excel, to start with data collection.
Windows Message
Data is encapsulated in a Windows message
(WM_COPYDATA). Retrieve the WM_COPYDATA message in your application. The decoded data is passed to your application through the lParam parameter.
Windows Event
- Whenever the reader reads a barcode, a Windows event object named DecodeEvent will be signaled and the data will be stored in the Windows message queue.
Need to create an event object named DecodeEvent in your application so that the ReaderCfg utility can signal your application using this event object. Call Windows API (ReadMsgQueue) in your application to retrieve the decoded data.
*Sample programs are provided for Windows Message
& Event programming. For details, please contact CipherLab technical support team. 90 9500CE Terminal Reference Manual Note: For the use of a different program rather than ReaderCfg, a dynamic-link library
(DLL) file is provided. Auto ENTER Auto ENTER Character Scan + ENTER This function can spare you the trouble of pressing the
[Enter] key on the terminal to confirm each scan. It will automatically add an ENTER character in front or to the end of one scan.
No
ENTER + Scan (efficient for continuous scanning) Scan + ENTER (time-saving)
*Auto ENTER must be enabled. Carriage Return
None
Carriage Return
Tab
Comma
Semicolon Space Prefix Code Suffix Code 0~10 characters 0~10 characters Include Cody Type YES or NO Include Cody Length YES or NO Barcode Decode Timeout Timeout When Decode Same Barcode 1~99 (0.1 sec.) 0~99 (0.1 sec.) NULL NULL NO (Disabled) NO (Disabled) 3.0 seconds 1.0 seconds AIM Duration 0~99 (0.1 sec.) 0.0 seconds RFID Settings will be displayed if the RFID reader is installed!
Check reader status when start session When running the program, it will take a few seconds to check status of the reader, barcode reader or RFID reader, before starting the session. YES (Enabled)
YES or NO Chapter 5 91 1D tab: (Extra) Long Range Laser UPC / EAN Supported on (Extra) Long Range Laser Default Enable UPC-A YES or NO Enable UPC-E0 YES or NO Enable UPC-E1 YES or NO Enable EAN-8 YES or NO Enable EAN-13 YES or NO Enable Bookland EAN Decode Supplementary Digits (Addon 2 & 5) YES or NO
*EAN-13 must be enabled!
When enabled, Addon 2 and Addon 5 of UPC /EAN families can be decoded too. Ignore Supplementals
Only with Supplementals (Decode barcodes with Addons only.)
Enable Supplementals (Decode barcodes with or without Addons.) YES (Enabled) YES (Enabled) NO (Disabled) YES (Enabled) YES (Enabled) NO (Disabled) Ignore Supplementals
(Disabled) Supplementary Redundancy With Enable Supplementals is selected, it will autodiscriminate barcodes with or without supplementals. 10 times Select a desired level of reading (decoding) security. Comprise some speed for getting more security when necessary. By default, it requires ten more successful decoding to make the reading of supplementals
(Addons) valid.
1~255 (decode times) Transmit UPC-A Check Digit Transmit UPC-E0 Check Digit Transmit UPC-E1 Check Digit UPC-A Preamble YES or NO YES or NO YES or NO YES (Enabled) YES (Enabled) YES (Enabled) By default, the selected UPC-A preamble is included in the data being transmitted. System Character
No Preamble
System Character System Character & Country Code UPC-E0 Preamble By default, the selected UPC-E0 preamble is included in the data being transmitted. System Character UPC-E1 Preamble By default, the selected UPC-E1 preamble is included in the data being transmitted. System Character 92 9500CE Terminal Reference Manual Convert UPC-E0 to UPC-A When enabled, the UPC-E0 reading will be expanded into UPC-A. It will then be processed according to the settings of UPC-A. NO (Disabled) Convert UPC-E1 to UPC-A When enabled, the UPC-E1 reading will be expanded into UPC-A. It will then be processed according to the settings of UPC-A. NO (Disabled) Convert EAN-8 to EAN-13 UCC Coupon Extended Code When enabled, the EAN-8 reading will be expanded into EAN-13. It will then be processed according to the settings of EAN-13. NO (Disabled) When enabled, it will decode UPC-A barcodes starting with digit 5, EAN-13 barcodes starting with digit 99, and UPC-A/EAN-128 coupon codes. NO (Disabled)
*UPC-A, EAN-13, and EAN-128 must be enabled!
**Use Supplemental Redundancy to control auto-discrimination of the EAN-128 (right half) of a coupon code. Code 128 Supported on (Extra) Long Range Laser Default Enable Code 128 YES or NO Enable EAN-128 YES or NO Enable ISBT 128 YES or NO YES (Enabled) YES (Enabled) YES (Enabled) Code 39 Supported on (Extra) Long Range Laser Default Enable Code 39 YES or NO Enable Trioptic Code 39 YES or NO YES (Enabled) NO (Disabled) Convert Code 39 to Code 32 Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. NO (Disabled) When enabled, it will decode Code 32 barcodes as well.
*Code 39 must be enabled!
Code 32 Prefix When enabled, the prefix character A will be added to all Code 32 barcodes. NO (Disabled)
*Convert Code 39 to Code 32 must be enabled!
Select Discrete Length The length of a barcode refers to the number of characters (i.e. human readable characters), including check digit(s) it contains. Any Length
Any Length
One Discrete Length
Two Discrete Lengths Chapter 5 93
Length within Range For example, if Length within Range is selected, the terminal will only accepts those barcodes with lengths that fall between the maximum and minimum lengths;
otherwise, data will be rejected.
*If Code 39 Full ASCII is enabled, Length within Range or Any Length is the preferred option. Verify Check Digit When enabled, the checksum verification will be performed in decoding. NO (Disabled) If the checksum is incorrect, data will be rejected.
*Only barcodes that include a Modulo 43 check digit are decoded. Enable this feature if the barcode contains a Modulo 43 check digit. Transmit Check Digit When enabled, the check digit will be included in the NO (Disabled) data being transmitted.
*By default, this feature (Not Transmit Check Digit) only works when Verify Check Digit is enabled first!
Code 39 Full ASCII When enabled, Code 39 Full ASCII will be supported instead. All the alphanumeric and special characters are included. NO (Disabled) Code 93 Supported on (Extra) Long Range Laser Default Enable Code 93 YES or NO Select Discrete Length Refer to Code 39 above. NO (Disabled) Any Length Interleaved 25 Supported on (Extra) Long Range Laser Default Enable Interleaved 25 Select Discrete Length YES or NO The length of a barcode refers to the number of characters (i.e. human readable characters), including check digit(s) it contains. The weak structure of some barcodes may cause a short scan error. To prevent this, select specific lengths: one or two discrete lengths YES (Enabled) Any Length
Any Length
One Discrete Length
Two Discrete Lengths
Length within Range For example, if Length within Range is selected, the 94 9500CE Terminal Reference Manual terminal will only accepts those barcodes with lengths that fall between the maximum and minimum lengths;
otherwise, data will be rejected. Verify Check Digit When enabled, the checksum verification will be performed in decoding, based on the selected algorithm. Disable If the checksum is incorrect, data will be rejected.
Disable
USS Check Digit
(USS = Uniform Symbology Specification)
OPCC Check Digit
(OPCC = Optical Product Code Council) Transmit Check Digit When enabled, the check digit will be included in the NO (Disabled) data being transmitted. Convert Interleaved 25 to EAN-13 When enabled, the Interleaved 25 reading will be expanded into EAN-13. It will then be processed according to the settings of EAN-13. NO (Disabled)
*The barcode must have a leading zero and a valid EAN-13 check digit.
**Verify Check Digit must be disabled!
Industrial 25 Supported on (Extra) Long Range Laser Default Enable Industrial 25 YES or NO Select Discrete Length Refer to Interleaved 25 above. NO (Disabled) Any Length Codabar Supported on (Extra) Long Range Laser Default Enable Codabar YES or NO Select Discrete Length CLSI Editing Refer to Code 39 above. When enabled, it will strip start / stop characters and insert a space after the first, fifth, and tenth characters of a 14-character barcode.
*This applies to 14-character barcodes only; barcode length does not include start and stop characters. If NOTIS is enabled, CLSI will override it. NO (Disabled) Any Length NO (Disabled) NOTIS Editing When enabled, it will strip start / stop characters from a decoded barcode. NO (Disabled) Chapter 5 95 MSI Supported on (Extra) Long Range Laser Default Enable MSI YES or NO Select Discrete Length Refer to Interleaved 25 above. Check Digit Select check digit(s) to transmit and verify:
One MSI Check Digit
Two MSI Check Digits NO (Disabled) Any Length One MSI Check Digit Transmit Check Digit When enabled, the check digit(s) will be included in the NO (Disabled) data being transmitted. Check Digit Algorithm With MSI barcodes, one check digit is mandatory and always verified (using Single Modulo 10). The second check digit is optional. MOD 10 / MOD 11 If two check digits are included, select a calculation method for the checksum verification to be performed in decoding. If the checksum is incorrect, data will be rejected.
MOD 10 / MOD 11
MOD 10 / MOD 10 RSS-14 Supported on (Extra) Long Range Laser Default Enable RSS-14 YES or NO Enable RSS Limited YES or NO Enable RSS Expanded YES or NO YES (Enabled) YES (Enabled) YES (Enabled) Convert RSS to UPC/EAN This only applies to RSS-14 and RSS Limited barcodes not decoded as part of a Composite barcode. NO (Disabled)
(1) When enabled, the leading 010 will be stripped from these barcodes and a 0 will be encoded as the first digit; this will convert RSS barcodes to EAN-13.
(2) For barcodes beginning with two or more zeros but not six zeros, this option will strip the leading 0010 and report the barcode as UPC-A. The UPC-A Preamble setting that transmits the system character and country code applies to such converted codes.
*Neither the system character nor the check digit can be stripped. Default Barcode Reader is always enabled if exists. Sound 2 Sound 9 NO (Disabled) 2 seconds Keyboard Emulation 96 9500CE Terminal Reference Manual 5.3.4 2D Reader General tab Settings Active Device The scan engine can be identified and toggled. Only one scan engine can be disabled at a time. 2D Reader
RFID Good Read Beep Mute, or Sound 1~9 Warning Beep Mute, or Sound 1~9 Enable Vibrator YES or NO Vibrator Duration 1~30 (sec.) *Vibrator must be enabled. Data Output There are three options for data output after decoding:
Keyboard Emulation
Data is emulated as typed text and sent to the active Window. Simply run your application or Pocket PC built-in program, such as Pocket Excel, to start with data collection.
Windows Message
Data is encapsulated in a Windows message
(WM_COPYDATA). Retrieve the WM_COPYDATA message in your application. The decoded data is passed to your application through the lParam parameter.
Windows Event
- Whenever the reader reads a barcode, a Windows event object named DecodeEvent will be signaled and the data will be stored in the Windows message queue.
Need to create an event object named DecodeEvent in your application so that the ReaderCfg utility can signal your application using this event object. Call Windows API (ReadMsgQueue) in your application to retrieve the decoded data.
*Sample programs are provided for Windows Message
& Event programming. For details, please contact CipherLab technical support team. Chapter 5 97 Note: For the use of a different program rather than ReaderCfg, a dynamic-link library
(DLL) file is provided. Auto ENTER Auto ENTER Character Scan + ENTER This function can spare you the trouble of pressing the
[Enter] key on the terminal to confirm each scan. It will automatically add an ENTER character in front or to the end of one scan.
No
ENTER + Scan (efficient for continuous scanning) Scan + ENTER (time-saving)
*Auto ENTER must be enabled. Carriage Return
None
Carriage Return
Tab
Comma
Semicolon Space Prefix Code Suffix Code 0~10 characters 0~10 characters Include Cody Type YES or NO Include Cody Length YES or NO Barcode Decode Timeout Timeout When Decode Same Barcode Decoding Autoexposure Decoding Illumination Decoding Aiming Pattern 5~99 (0.1 sec.) 0~99 (0.1 sec.) ON or OFF ON or OFF ON or OFF NULL NULL NO (Disabled) NO (Disabled) 9.9 seconds 0.6 seconds ON ON ON RFID Settings will be displayed if the RFID reader is installed!
Check reader status when start session When running the program, it will take a few seconds to check status of the reader, barcode reader or RFID reader, before starting the session. YES (Enabled)
YES or NO 98 9500CE Terminal Reference Manual 2D tab UPC / EAN Supported on 2D Reader Enable UPC-A YES or NO Enable UPC-E0 YES or NO Enable UPC-E1 YES or NO Enable EAN-8 YES or NO Enable EAN-13 YES or NO Enable Bookland EAN Decode Supplementary Digits (Addon 2 & 5) YES or NO
*EAN-13 must be enabled!
When enabled, Addon 2 and Addon 5 of UPC /EAN families can be decoded too. Ignore Supplementals
Only with Supplementals (Decode barcodes with Addons only.)
Enable Supplementals (Decode barcodes with or without Addons.) Default YES (Enabled) YES (Enabled) NO (Disabled) YES (Enabled) YES (Enabled) NO (Disabled) Ignore Supplementals
(Disabled) Supplementary Redundancy With Enable Supplementals is selected, it will autodiscriminate barcodes with or without supplementals. 10 times Select a desired level of reading (decoding) security. Comprise some speed for getting more security when necessary. By default, it requires ten more successful decoding to make the reading of supplementals
(Addons) valid.
1~255 (decode times) Transmit UPC-A Check Digit Transmit UPC-E0 Check Digit Transmit UPC-E1 Check Digit UPC-A Preamble YES or NO YES or NO YES or NO YES (Enabled) YES (Enabled) YES (Enabled) By default, the selected UPC-A preamble is included in the data being transmitted. System Character
No Preamble
System Character System Character & Country Code UPC-E0 Preamble By default, the selected UPC-E0 preamble is included in the data being transmitted. System Character UPC-E1 Preamble By default, the selected UPC-E1 preamble is included in the data being transmitted. System Character Convert UPC-E0 to When enabled, the UPC-E0 reading will be expanded NO (Disabled) Chapter 5 99 UPC-A into UPC-A. It will then be processed according to the settings of UPC-A. Convert UPC-E1 to UPC-A When enabled, the UPC-E1 reading will be expanded into UPC-A. It will then be processed according to the settings of UPC-A. NO (Disabled) Convert EAN-8 to EAN-13 UCC Coupon Extended Code When enabled, the EAN-8 reading will be expanded into EAN-13. It will then be processed according to the settings of EAN-13. NO (Disabled) When enabled, it will decode UPC-A barcodes starting with digit 5, EAN-13 barcodes starting with digit 99, and UPC-A/EAN-128 coupon codes. NO (Disabled)
*UPC-A, EAN-13, and EAN-128 must be enabled!
**Use Supplemental Redundancy to control auto-discrimination of the EAN-128 (right half) of a coupon code. Linear UPC / EAN Decode This applies to barcodes that contain two adjacent blocks, such as UPC-A, EAN-8, and EAN-13. NO (Disabled) When enabled, a barcode is transmitted only when both the left and right blocks are successfully decoded within one scan line.
*Enable this option when barcodes are in proximity to each other. Code 128 Supported on 2D Reader Enable Code 128 YES or NO Enable EAN-128 YES or NO Enable ISBT 128 YES or NO Code 39 Supported on 2D Reader Enable Code 39 YES or NO Enable Trioptic Code 39 YES or NO Default YES (Enabled) YES (Enabled) YES (Enabled) Default YES (Enabled) NO (Disabled) Convert Code 39 to Code 32 Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. NO (Disabled) When enabled, it will decode Code 32 barcodes as well.
*Code 39 must be enabled!
Code 32 Prefix When enabled, the prefix character A will be added to all Code 32 barcodes. NO (Disabled) 100 9500CE Terminal Reference Manual
*Convert Code 39 to Code 32 must be enabled!
Select Discrete Length The length of a barcode refers to the number of characters (i.e. human readable characters), including check digit(s) it contains. Any Length
Any Length
One Discrete Length
Two Discrete Lengths
Length within Range For example, if Length within Range is selected, the terminal will only accepts those barcodes with lengths that fall between the maximum and minimum lengths;
otherwise, data will be rejected.
*If Code 39 Full ASCII is enabled, Length within Range or Any Length is the preferred option. Verify Check Digit When enabled, the checksum verification will be performed in decoding. NO (Disabled) If the checksum is incorrect, data will be rejected.
*Only barcodes that include a Modulo 43 check digit are decoded. Enable this feature if the barcode contains a Modulo 43 check digit. Transmit Check Digit When enabled, the check digit will be included in the NO (Disabled) data being transmitted.
*By default, this feature (Not Transmit Check Digit) only works when Verify Check Digit is enabled first!
Code 39 Full ASCII When enabled, Code 39 Full ASCII will be supported instead. All the alphanumeric and special characters are included. NO (Disabled) Code 93 Supported on 2D Reader Enable Code 93 YES or NO Select Discrete Length Refer to Code 39 above. Code 11 Supported on 2D Reader Enable Code 11 YES or NO Refer to Code 39 above. Select Discrete Length Verify Check Digit Default NO (Disabled) Any Length Default NO (Disabled) Any Length When enabled, the checksum verification will be performed in decoding. Disable If the checksum is incorrect, data will be rejected. Chapter 5 101
Disable
One Check Digit
Two Check Digits Transmit Check Digit When enabled, the check digit will be included in the NO (Disabled) data being transmitted.
*By default, this feature (Not Transmit Check Digit) only works when Verify Check Digit is enabled first!
Interleaved 25 Supported on 2D Reader Enable Interleaved 25 Select Discrete Length YES or NO The length of a barcode refers to the number of characters (i.e. human readable characters), including check digit(s) it contains. The weak structure of some barcodes may cause a short scan error. To prevent this, select specific lengths: one or two discrete lengths Default YES (Enabled) Any Length
Any Length
One Discrete Length
Two Discrete Lengths
Length within Range For example, if Length within Range is selected, the terminal will only accepts those barcodes with lengths that fall between the maximum and minimum lengths;
otherwise, data will be rejected. Verify Check Digit When enabled, the checksum verification will be performed in decoding, based on the selected algorithm. Disable If the checksum is incorrect, data will be rejected.
Disable
USS Check Digit
(USS = Uniform Symbology Specification)
OPCC Check Digit
(OPCC = Optical Product Code Council) Transmit Check Digit When enabled, the check digit will be included in the NO (Disabled) data being transmitted. Convert Interleaved 25 to EAN-13 When enabled, the Interleaved 25 reading will be expanded into EAN-13. It will then be processed according to the settings of EAN-13. NO (Disabled)
*The barcode must have a leading zero and a valid EAN-13 check digit. 102 9500CE Terminal Reference Manual
**Verify Check Digit must be disabled!
Industrial 25 Supported on 2D Reader Enable Industrial 25 YES or NO Select Discrete Length Refer to Interleaved 25 above. Codabar Supported on 2D Reader Enable Codabar YES or NO Select Discrete Length CLSI Editing Refer to Code 39 above. When enabled, it will strip start / stop characters and insert a space after the first, fifth, and tenth characters of a 14-character barcode.
*This applies to 14-character barcodes only; barcode length does not include start and stop characters. If NOTIS is enabled, CLSI will override it. Default NO (Disabled) Any Length Default NO (Disabled) Any Length NO (Disabled) NOTIS Editing When enabled, it will strip start / stop characters from a decoded barcode. NO (Disabled) MSI Supported on 2D Reader Enable MSI YES or NO Select Discrete Length Refer to Interleaved 25 above. Check Digit Select check digit(s) to transmit and verify:
One MSI Check Digit
Two MSI Check Digits Default NO (Disabled) Any Length One MSI Check Digit Transmit Check Digit When enabled, the check digit(s) will be included in the NO (Disabled) data being transmitted. Check Digit Algorithm With MSI barcodes, one check digit is mandatory and always verified (using Single Modulo 10). The second check digit is optional. MOD 10 / MOD 11 If two check digits are included, select a calculation method for the checksum verification to be performed in decoding. If the checksum is incorrect, data will be rejected.
MOD 10 / MOD 11
MOD 10 / MOD 10 Chapter 5 103 Postal Codes Supported on 2D Reader Enable US Postnet YES or NO Enable US Planet YES or NO Transmit US Check Digit YES or NO Enable UK Postal YES or NO Transmit UK Check Digit YES or NO Enable Japan Postal YES or NO Enable Australian Postal YES or NO Enable Dutch Postal YES or NO RSS-14 Supported on 2D Reader Enable RSS-14 YES or NO Enable RSS Limited YES or NO Enable RSS Expanded YES or NO Default YES (Enabled) YES (Enabled) YES (Enabled) YES (Enabled) YES (Enabled) YES (Enabled) YES (Enabled) YES (Enabled) Default YES (Enabled) YES (Enabled) YES (Enabled) Convert RSS to UPC/EAN This only applies to RSS-14 and RSS Limited barcodes not decoded as part of a Composite barcode. NO (Disabled)
(1) When enabled, the leading 010 will be stripped from these barcodes and a 0 will be encoded as the first digit; this will convert RSS barcodes to EAN-13.
(2) For barcodes beginning with two or more zeros but not six zeros, this option will strip the leading 0010 and report the barcode as UPC-A. The UPC-A Preamble setting that transmits the system character and country code applies to such converted codes.
*Neither the system character nor the check digit can be stripped. Composite Codes Supported on 2D Reader Enable Composite CC-C Enable Composite CC-A/B YES or NO YES or NO Enable Composite YES or NO Default NO (Disabled) NO (Disabled) NO (Disabled) 104 9500CE Terminal Reference Manual TLC-39 Enable UPC Composite Mode UPC barcodes can be linked with a 2D barcode during transmission as if they were one barcode. There are three options for these composite barcodes:
UPC Always Linked
UPC Never Linked
(to transmit UPC barcodes only, regardless of whether a 2D barcode is detected)
UPC Always Linked
(to transmit UPC barcodes and the 2D portion; if 2D is not present, it will not transmit UPC barcodes, i.e. CC-A/B or CC-C must be enabled!)
Autodiscriminate UPC Composites
(to transmit UPC barcodes, as well as the 2D portion if present) Enable UCC/EAN Code 128 Emulation YES or NO 2D Symbologies Supported on 2D Reader Enable PDF417 YES or NO Enable MicroPDF417 YES or NO Enable Code 128 Emulation YES or NO
*MicroPDF417 must be enabled!
NO (Disabled) Default YES (Enabled) NO (Disabled) NO (Disabled) If Code 128 Emulation is enabled, these MicroPDF417 barcodes are transmitted with one of the following prefixes:
]C1 if the first codeword is 903-907, 912, 914, 915
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911 If disabled, they are transmitted with one of the following prefixes:
]L3 if the first codeword is 903-907, 912, 914, 915
]L4 if the first codeword is 908 or 909
]L5 if the first codeword is 910 or 911 Enable Data Matrix YES or NO Enable MaxiCode YES or NO Enable QR Code YES or NO YES (Enabled) YES (Enabled) YES (Enabled) Macro PDF Supported on 2D Reader Default Transmit / Decode Mode There are three options for handling Macro PDF decoding:
Passthrough All Symbols Chapter 5 105
Buffer All Symbols / Transmit Macro PDF When Complete
(to transmit all decoded data from an entire Macro PDF sequence only when the entire sequence is scanned and decoded; if the decoded data exceeds the limit of 50 symbols, no transmission because the entire sequence was not scanned!)
Transmit Any Symbol in Set / No Particular Order
(to transmit data from each Macro PDF symbol as decoded, regardless of the sequence; when selecting this mode, enable Transmit Control Header below!)
Passthrough All Symbols
(to transmit and decode all Macro PDF symbols and perform no processing; in this mode, the host is responsible for detecting and parsing the Macro PDF sequences) Transmit Control Header When enabled, it activates transmission of the control header, which contains the segment index and the file ID. NO (Disabled) For example, the field may be \92800000\725\120\343. The five digits after the \928 are the segment index (or block index), and \725\120\343 is the file ID.
Enable this when selecting Transmit Any Symbol in Set / No Particular Order above.
Disable this when selecting Buffer All Symbols /
Transmit Macro PDF When Complete.
This has no effect when selecting Passthrough All Symbols. Escape Characters When enabled, it uses the backslash \ as an Escape character for systems that can process transmissions containing special data sequences. None (Disabled)
None
GLI Protocol
(to format special data according to the Global Label Identifier protocol; this only affects the data portion of a Macro PDF symbol transmission; the Control Header, if enabled, is always sent with GLI formatting) 106 9500CE Terminal Reference Manual 5.3.5 RFID Reader If you have RFID reader installed, click the General tab and its settings are available at the bottom of the list. General tab Settings Read UID of RFID tag YES or NO Read data of RFID tag Use Delimiter to separate UID from data YES or NO YES or NO Delimiter 1 character Start Position 0~127 Maximum Length 0~127 RFID Read Duration 1~5 (sec.) Check reader status when start session When running the program, it will take a few seconds to check status of the reader, barcode reader or RFID reader, before starting the session.
YES or NO Default YES (Enabled) NO (Disabled) NO (Disabled)
, (comma) 0 127 3 seconds YES (Enabled) Chapter 5 107 5.4 Inbox You can send and receive e-mail by connecting to a POP3 or IMAP4 server. Inbox provides an e-mail service for each method you use. In addition, you can synchronize the e-mail messages in Inbox with either Microsoft Outlook or Microsoft Exchange Server on your computer through the default ActiveSync mail service. 5.4.1 Create an E-mail Box 1. Double-tap the Inbox shortcut on the desktop. Tap and drag the toolbar handle to move it under the menu bar. 2. Select Services > Options from the menu bar. 108 9500CE Terminal Reference Manual 3. Tap and drag the dialog box to show the right edge. Tap [Add] to create an e-mail service. 4. In the Service Name dialog box, select POP3 Mail or IMAP4 Mail for the service type. Change the name of e-mail service if necessary. Tap [OK]. 5. Proceed with the POP3 or IMAP4 Mail Service Definition (from 1/3 to 3/3). Chapter 5 109 Connection Description Network Connection Send and Receive e-mail through Ethernet, 802.11b/g or Bluetooth PAN connection. USB Connection Send and Receive e-mail through USB connection via the cradle. 6. After you successfully create an e-mail service, you may start using it now. Toolbar Buttons Description See Also Compose a new message Compose > New Message Reply to sender Reply to all Compose > Reply to Sender Compose > Reply to All Forward this message Compose > Forward Delete this message File > Delete Synchronize folders (multiple mailboxes for IMAP4 ) Services > Synchronize Folders Send and receive mail manually Services > Send/Receive Mail Connect or disconnect Services > Connect 110 9500CE Terminal Reference Manual
When connected, it will send and receive mail automatically. 5.4.2 Synchronize Inbox When you seat the terminal in the cradle and connect it to your computer for the first time, ActiveSync 3.7.1 will guide you through setting up a partnership between the terminal and your computer. Refer to ActiveSync with a Computer. Select the check box of Inbox as shown below, and click [Settings] to configure it. Note: ActiveSync 4.x does not support Inbox Synchronization. We recommend that you have ActiveSync 3.7.1 installed on your computer. Specifications 111 General Power CPU Memory Main:
Rechargeable 3.7 V, 4000 mAh Li-ion battery pack Backup:
Rechargeable 3.7 V, 110 mAh Lithium battery Adapter
(cradle):
Input - AC 110/220 V Output - DC 6 V, 3.3 A Intel PXA270 at 520 MHz ROM:
128 MB non-volatile NAND flash memory RAM:
128 MB on-board SDRAM memory Operating System Windows CE 5.0 Programming
Visual Studio .NET 2003 with the Windows CE Utilities for Visual Studio .NET 2003 Add-on Pack eMbedded Visual C++ 4.0 SP4
Windows-based Application Generator (AG) a DLL file for reader configuration Physical Enclosure Material:
Rubber & ABS plastic Dimensions:
230 mm (L) x 91 mm (W) x 63 mm (H) Weight:
Approx. 600 g (One battery pack included) Input Devices Reader:
One scan engine (CCD/Laser/Long Range Laser/Extra Long Range Laser/2D), and/or the RFID reader Keypad:
27-key layout Rubber keys with LED backlight Display Type:
Color transflective TFT display with LED backlight Touch screen Size:
3.5 inches Resolution: 240 x 320 pixels Indicators LED:
Tri-color LED Speaker:
Low power transducer type, 1 KHz to 4 KHz Vibrator:
9000 2000 RPM, Max. 50 dB 112 9500CE Terminal Reference Manual Communications USB Client:
Peer-to-Peer connection via cradle (ActiveSync) USB Host: For peripherals, such as a keyboard, mouse, storage card, etc. Ethernet:
10/100 Mbps via cradle WPAN /
WLAN:
Bluetooth Class 2 IEEE 802.11b/g Environmental Humidity Operating: 5% to 90% non-condensing Storage:
5% to 95% non-condensing Temperature Operating:
-10 to 50 C Storage:
-20 to 60 C Shock Resistance 1.5 m, 5 drops per 6 sides Splash/Dust Resistance IP 64 EMC Certification FCC, CE, C-Tick, TELEC, IC, NCC, BSMI, MIC A P P E N D I X I Comparison of Scan Modes 113 For the following 1D scan engine, you can select a desired scan mode.
CCD scan engine
Laser scan engine Scan Mode ON Always Press trigger once Hold trigger Press trigger twice OFF Release trigger Press trigger once Barcode being read Time-
out
Continuous mode Test mode Repeat mode Momentary mode Alternate mode Aiming mode Laser mode Auto Off mode Auto Power Off mode
114 9500CE Reference Manual Continuous Mode
The reader is always scanning, but only one decoding is allowed for the same barcode. That is, to read (i.e. scan and decode) the same barcode multiple times, the barcode has to be taken away and replaced for new scanning.
Several modes have been developed based on this mode. Test Mode
The reader is always scanning for testing purpose.
Comparing to the Continuous mode, it will decode repeatedly even with the same barcode without re-approaching. Repeat Mode This mode is most useful when the same barcode is to be read many times. When the scan trigger is pressed within one second after a successful reading, the same data will be re-transmitted without actually reading the barcode. Such re-transmission can be activated as many times as needed, as long as the time interval between each triggering does not exceed one second.
The reader is always scanning.
It will decode once for the same barcode and allow for re-transmission when triggering within one second. Momentary Mode
Hold down the scan trigger to start scanning.
The scanning continues until the trigger is released. Alternate Mode
The scanning continues until the trigger is pressed again. Press the scan trigger to start scanning. Aiming Mode This mode best applies when two barcodes are printed too close to each other. It is necessary to take aim first to make sure the correct barcode will be scanned.
Press the scan trigger to aim at a barcode. Within one second, press the trigger again to decode the barcode.
The scanning continues until one of the events happens:
(1) A barcode is read.
(2) The preset timeout expires. Note: The system global variable AIMING_TIMEOUT can be used to change the default one-second timeout interval for aiming. The unit for this variable is 5 ms. Appendix I 115 Laser Mode This mode is most often used on laser scanners.
Hold down the scan trigger to start scanning.
The scanning continues until one of the events happens:
(1) A barcode is read.
(2) The preset timeout expires.
(3) The trigger is released. Auto Off Mode This is the default mode.
The reader will start to scan once the scan trigger is pressed.
The scanning continues until one of the events happens:
(1) A barcode is read.
(2) The preset timeout expires. Auto Power Off Mode
The reader will start to scan once the scan trigger is pressed.
The scanning continues until one of the events happens:
(1) The preset timeout expires.
Comparing to the Auto Off mode, the reader continues to scan whenever there is a successful reading of barcode because its timeout period re-counts.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-03-30 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | 13.56 ~ 13.56 | DXT - Part 15 Low Power Transceiver, Rx Verified |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2008-03-30
|
||||
1 2 3 | Applicant's complete, legal business name |
CipherLab Co., Ltd.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0015617624
|
||||
1 2 3 | Physical Address |
12F, 333, Dunhua S.Rd., Sec.2, Taipei, Taiwan
|
||||
1 2 3 |
Taipei, N/A
|
|||||
1 2 3 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
Q3N
|
||||
1 2 3 | Equipment Product Code |
9500CE1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
H******** J********
|
||||
1 2 3 | Title |
R & D Engineer
|
||||
1 2 3 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
h******@cipherlab.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | DXT - Part 15 Low Power Transceiver, Rx Verified | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Terminal | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power Output listed is conducted. This device is for handheld operation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located WLAN operating conditions have been evaluated. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 2 3 | Power Output listed is conducted. This device is for handheld operation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located Bluetooth operating conditions have been evaluated. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Compliance Certification Services Inc.
|
||||
1 2 3 | Name |
K****** C********
|
||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
k******@ccsrf.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 28 CC | 2402.00000000 | 2480.00000000 | 0.0006800 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 28 CC | 2412.00000000 | 2462.00000000 | 0.0370000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 28 CC | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC