Astra 31006B MANUAL / MANUEL / MANUAL Digital Baby Video Monitor Digital Baby Video Mon Moniteur vido bb numrique Moniteur vido bb numri Video Monitor Digital para Beb Video Monitor Digital para B CAUTION: Keep small parts away from children. ATTENTION: Gardez les petites pices hors de la porte des enfants. PRECAUCIN: Mantenga las piezas pequeas fuera del alcance de los nios. mylevana.com SAFETY WARNINGS CAUTION: Keep small parts away from children. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and babys reach at all times. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and should be kept out of childrens reach. This product contains small parts. Exercise care when unpacking and assembling the product. Read and Keep Instructions: All the safety and operating instructions should be read before the video baby monitor is operated. This product cannot replace responsible adult supervision. Use only with provided power supply. The socket-outlet shall be installed near the equipment and shall be easily accessible. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE!
Dispose of used batteries according to the instructions. Use only batteries/power supplies listed in the user manual. Water and Moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping or splashing. No objects lled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water. Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use. Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air ow. Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight. Power Source: This unit should only be used with the AC power adapters included in this package (rated 5.9V 1A) Damage Requiring Service: This unit should be serviced by qualied personnel only when:
a. Objects have fallen or liquid has been spilled into the product b. The units have been exposed to rain c. The units do not appear to operate normally or exhibits a distinct change in performance d. The units have been dropped or the enclosure damaged mylevana.com 2 FFCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operationn is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. IC Warning RSS(Category I Equipment):
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC\IC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Under idustry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. avec une antenne d'un type et d'un gain maximal Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner
(ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. 3 Please visit our website at www.myLEVANA.com for information about your products warranty We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods:
Support: www.mylevana.com/support Web: www.mylevana.com Warranty Terms 1. LEVANA products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. LEVANA USA 60 Industrial Parkway #Z64 Cheektowaga NY USA 14227 LEVANA Canada 4080 Montrose Road Niagara Falls, ON Canada L2H 1J9 This warranty is limited to the repair, replacement or refund of the purchase price at LEVANAs option. 2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual. 3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty. 4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not specically mentioned in this warranty. 5. This warranty does not cover the shipping cost, insurance or any other incidental charges. 6. You MUST contact LEVANA at www.mylevana.com/support before sending any product back for repair. You will be sent a Return Authorization form with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #). 7. This warranty is valid only in Canada and the continental U.S. 8. This warranty cannot be re-issued. mylevana.com 4 TABLE OF CONTENTS SAFETY INSTRUCTIONS ............................................................................................................................................................................................................. 2 FCC STATEMENT .......................................................................................................................................................................................................................... 3 WARRANTY ................................................................................................................................................................................................................................... 4 WHATS INCLUDED ..................................................................................................................................................................................................................... 6 BUTTONS AND CONNECTIONS - MONITOR ........................................................................................................................................................................ 7 BUTTONS AND CONNECTIONS - CAMERA ........................................................................................................................................................................... 8 SETUP ............................................................................................................................................................................................................................................. 9 Battery installation ....................................................................................................................................................................................................... 9 Connecting Power to the Monitor / Charging Battery ....................................................................................................................................... 10 Connecting Power to the Camera ......................................................................................................................................................................... 10 Screen Icons ................................................................................................................................................................................................................11 OPERATION ................................................................................................................................................................................................................................ 12 Turn the Monitor ON / OFF ...................................................................................................................................................................................... 12 Pairing the Cameras & Monitor ............................................................................................................................................................................... 12 Placement of the Monitor ........................................................................................................................................................................................ 13 Placement of the Camera ........................................................................................................................................................................................ 13 Mounting the Camera on a Tabletop Safely ......................................................................................................................................................... 13 Mounting the Camera on a Wall Safely ................................................................................................................................................................. 14 Night Vision ................................................................................................................................................................................................................. 15 Adjusting the Camera Angle .................................................................................................................................................................................... 15 Using the ZOOM Function ....................................................................................................................................................................................... 15 Volume ......................................................................................................................................................................................................................... 16 Using the Talk to Baby Two-Way Intercom ....................................................................................................................................................... 16 Selecting a Lullaby ..................................................................................................................................................................................................... 16 Using PEEP Mode ........................................................................................................................................................................................................17 Changing the Camera View ......................................................................................................................................................................................17 Setting the Brightness ............................................................................................................................................................................................... 18 Sound Sensitivity Settings ........................................................................................................................................................................................ 18 Contacting Customer Support ................................................................................................................................................................................ 19 TROUBLESHOOTING ................................................................................................................................................................................................................20 5 mylevana.com WHATS INCLUDED
This product is not a toy. This product contains small parts. Exercise care when unpacking and assembling the product. This product does not replace responsible adult supervision. Check on your child at regular intervals and make sure your monitor is always adequately charged. LEVANA does not endorse any LEVANA products for illegal activities. Levana is not responsible or liable in any way for any damage, vandalism, theft or any other action that may occur while a LEVANA product is in use by the purchaser. We reserve the right to change models, conguration, or specications without notice or liability. Product may not be exactly as shown. 2012 LEVANA. All rights reserved. LEVANA, the LEVANA logo, Astra and other LEVANA marks may be registered. All other Trademarks are the property of their respective owners. mylevana.com 6
LOCK / UNLOCK BUTTON Disables ALL function buttons in the LOCK position 2. LCD SCREEN 3. POWER ON/OFF 4. POWER INPUT 5. TALK TO BABY Press and hold to talk, release to listen 6. 7. MENU 8. MICROPHONE 9. COLOR-CHANGING LED RING Ring changes color with sound intensity
DIRECTIONAL ARROWS / VOLUME CONTROL
ANTENNA Extend to improve signal
TABLE STAND
SPEAKER
BATTERY COMPARTMENT
2 3 4 MONITOR 5 6 7 9
8
7 mylevana.com CAMERA
2 3 5 6 7 8 4
2. MICROPHONE 3. POWER LED 4. NIGHT VISION LIGHT SENSOR mylevana.com 8 5. ANTENNA 6. POWER INPUT 7. POWER ON/OFF 8. SPEAKER SETUP LETS GET STARTED!
Battery Installation
1. Gently remove the BATTERY COMPARTMENT COVER on the back of the monitor by sliding down. 2. Insert the battery; the battery connectors on the battery should line up with the connectors inside the battery compartment. 3. Slide the BATTERY COMPARTMENT COVER back into place. Get the Most Out of Your Rechargeable Battery 1. Fully charge battery (4 hours) before rst use. 2. To maximize battery life, charge battery before battery is fully drained. 3. Avoid extreme heat or cold as this will affect the life of the battery. 4. Turn LCD screen OFF; press POWER 5. Astra menu settings that increase battery life:
button on the side of the monitor ONCE. PEEP Mode: After 1 minute of inactivity, monitor enters standby/sleep mode. Adjustable Brightness: Decreasing screen brightness will extend battery life. 6. For extended periods of non-use, please remove battery from baby monitor. 2 3 9 mylevana.com SETUP Connecting Power to the Monitor / Charging Battery 1. Connect the small end of power adapter marked MONITOR into the DC input on the side of the monitor as shown in the diagram. Connect the other end of the adapter into an available wall outlet. For safety reasons, ONLY use the adapters included in the package. LED Ring 2. Press and hold the POWER 3. The icon in the top right corner of the main screen will show you the battery power status. 4. The LED Ring on the front of the monitor also indicates the battery power status. button on the side of the monitor to turn the monitor ON. SOLID BLUE = BATTERY FULLY CHARGED SLOW FLASHING BLUE = BATTERY CHARGING QUICK FLASHING BLUE = BATTERY LOW FLASHING PINK = PAIRING UNSUCCESSFUL 5. For safety reasons, ONLY use the adapters included in the package. EMPTY CHARGING FULL Connecting Power to the Camera 1. Take the second power adapter and connect the small end of the power adapter marked CAMERA For safety reasons, ONLY use the adapters included in the package. into the DC input on the side of the camera base as shown in the diagram. 2. On the side of the camera, slide the POWER switch LEFT to the ON position. The POWER LED will light up. DC Input ON / OFF O Switch DC Input DC Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the babys reach at all times. mylevana.com
SIGNAL STRENGTH NO SIGNAL STRONG SIGNAL PTZ / VPIZ / PTZ SCREEN ICONS SOUND SENSITIVITY SETTING OFF MEDIUM HIGH LOW LOUD BRIGHT BATTERY STRENGTH ZOOM EMPTY CHARGING FULL VOLUME OFF PEEP MODE TALK TO BABY BRIGHTNESS DARK CAMERA CAMERA SUPPORT PAIRING NO CAM CAM CAM CAM SEQ NO CAM CAM CAM CAM SEQ CAM CAM 3 4 MODE 3 4 MODE 1 1 2 2 PAIRING CAM CAM CAM CAM 1 3 4 2
mylevana.com OPERATION Turn the MONITOR ON/OFF Press and hold the POWER ON. Press and hold the POWER button on the side of the monitor to turn the monitor button again to turn OFF the monitor. Pairing the Camera(s) and Monitor The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the devices do not automatically connect and transmit, you may do so manually. ICONS ARE ORANGE WHEN SELECTED Note: Before you begin pairing, be sure to have the monitor and the camera(s) side by side. 1. To pair your camera and monitor, press the MENU button. Using the navigational arrows and press the SELECT + button once to select. on the front of the monitor, highlight the PAIRING icon 2. Use the navigational arrows 3. Press the SELECT + button. When you see to highlight the the icon. ashing next to camera icon, quickly press and hold the PAIRING A checkmark Video/audio will be transmitted automatically. will appear next to camera button on the BOTTOM of the camera. conrming pairing is successful. 4. To pair additional cameras, repeat steps 1 to 3 and be sure to select camera number
, or in the Pairing menu when pairing each additional camera. mylevana.com
Placement of the Monitor This monitor can be placed on a tabletop.
You can place the monitor on a tabletop by using the retractable table stand on the back of the monitor. When not in use, simply tuck the table stand away into the back of the monitor until you hear a "click". OPERATION Placement of the Camera This camera can be placed on a tabletop or hung on the wall above the area being monitored.
Place the camera within 15 feet of the area being monitored for best picture results.
Do not place objects within 2 feet of the eld of vision of the camera as the night vision will not activate correctly if objects are too close. Mounting the Camera on a Tabletop Safely:
1. Place the camera on a tabletop no less than 3 feet away from your babys crib. 2. Feed the power cord down the back of the table or use wall clips (not included) to secure the cord away so the baby cannot reach it. 3. Plug in the power cord, check the monitor to ensure that you are getting a good view of your child and there are no obstructions. 3 ft Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the babys reach at all times.
mylevana.com OPERATION Mounting the Camera on a Wall Safely:
Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall. Ensure you are hanging the camera no less than 3 feet away from babys crib. Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the babys reach at all times. 1. Pre-drill two holes in the wall using a 3/16, 4.8mm drill bit. 2. Insert the included wall anchors into each hole and tap gently with a hammer until the anchor is ush with the wall. 3. Insert a screw (included) into each wall anchor and tighten until the screws only stick out about a 1/2 inch. 4. Plug the power cord into the power input of the camera. 5. Locate the wall mounting holes on the bottom of the camera base. 6. Slide the holes over the screws sticking out of the wall. 7. Conrm that the camera is secure, if it is loose you may have to tighten the screws more. 8. Use wall clips (not included) to secure the power cord away from the crib or the babys reach. 9. Connect the other end of the adapter into an available wall outlet. mylevana.com
Night Vision The camera is equipped with NEW Invisible IR (infrared) LEDs which keep the nursery dark. The LEDs are located on the front of the camera and allow you to see up to 12 feet in complete darkness so you can check on your baby at any time of night. The night vision LEDs will activate automatically when the Light Sensor on the side of the camera detects that the light levels are too low. INVISIBLE LEDs OPERATION
The camera is equipped with Pan / Tilt / Zoom (PTZ). You can adjust the angle 300 degrees horizontal and 110 degrees vertical from the center position. 1. Press the button on the front of the monitor. 2. Using the NAVIGATIONAL KEYS, move the camera to the desired position. 3. When set, press the button again. NAVIGATIONAL KEYS CENTER POSITION
In LIVE VIEW mode, press the SELECT + button. To return to normal view, press the SELECT + button again.
mylevana.com OPERATION Volume Use the navigational arrows
Press the to increase /decrease /mute the VOLUME. button to INCREASE the volume in LIVE VIEW; the VOLUME icon will display the volume level in the top left corner of the screen.
Press the button to DECREASE the volume; to MUTE, decrease the volume until the icon appears in the top left corner of the screen. Note: Placing the monitor and camera too close together will create feedback. DECREASE or MUTE the volume and move the camera away from the monitor. Using the Talk to Baby Two-Way Intercom With the simple press of a button you can talk to your child at any time without entering the nursery. 1. To talk, press and hold the 2. To talk when using multiple cameras, select the camera in the MENU and press the button on the front of the monitor and release to listen. button, release to listen. Setting a lullaby Choose from three different lullabies to soothe your baby to sleep. 1. To select a lullaby, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the LULLABY icon. 2. Use the to toggle to select the LULLABY icon of your choice and press the SELECT + button once to select. 3. To turn OFF the lullabies, select the and press the + button once to select. mylevana.com
Using PEEP Mode OPERATION When in PEEP Mode, the monitor enters standby/sleep mode after 1 minute of inactivity. When sound is detected, the screen changes to live view.
To access live view manually when the screen is off, press the POWER
PEEP Mode extends the battery life over 48 hours. 1. To set PEEP Mode, press the MENU button. Using the navigational arrows on button ONCE. the front of the monitor, highlight the PEEP Mode icon
. 2. Use the 3. To return to continuous live view, press the MENU button. to toggle to the icon and press the SELECT + button once to select. Changing the Camera View 1. To change the camera view, press the MENU button. Using the navigational arrows 2. Use the on the front of the monitor, highlight the CAMERA icon. to toggle to select the CAMERA icon of your choice and press the SELECT + button once to select. 3. Select to cycle though cameras 1 through 4 and press the SELECT + button once to select. 4. To return to continuous live view, press the MENU button.
mylevana.com OPERATION Setting the Brightness Brightness Mode sets the brightness of the the screen. Brightness Mode also extends the battery life. 1. To set the Brightness Mode, press the MENU button. Using the navigational arrows 2. Use the on the front of the monitor, highlight the BRIGHTNESS icon. to toggle to the your desired brightness and press the SELECT + button once to select. Sound Sensitivity Settings Sensitivity Mode allows you to adjust the sensitivity of the sound the that the camera picks up. 1. To set the Sensitivity Mode, press the MENU button. Using the navigational arrows 2. Use the on the front of the monitor, highlight the SENSITIVITY icon. to toggle to the your desired sensitivity and press the SELECT + button once to select. 3. The LED Ring on the front of the monitor also indicates how loud the sound in the room is with colors. SOUND SENSITIVITY SETTING OFF MEDIUM HIGH LOW SOUND SENSITIVITY COLORS LOW MEDIUM HIGH mylevana.com
Contacting Customer Support OPERATION Customer Support is just a click away whenever you need it! Our customer support team can be reached by live web chat or on our website at www.mylevana.com/support. Our experts will be happy to assist you in English, French and Spanish. 1. To access Customer Support, press the MENU button. Using the navigational icon press the arrows SELECT + button once to select. on the front of the monitor, highlight the SUPPORT 2. This will take you to the screen which displays our Customer Support information. Press the MENU button once to EXIT the Customer Support screen. Support: www.mylevana.com/support Web: www.mylevana.com Online Live Web Chat: www.mylevana.com
mylevana.com TROUBLESHOOTING ISSUE Equipment does not function No reception Reception Interference (static) Feedback (screeching, static) Noise (static, beeping) POSSIBLE SOLUTION
Conrm that the camera and monitor are ON The battery may be depleted; charge battery
The power adapters may not be properly connected
Camera and monitor may not be properly paired; follow PAIRING instructions
Camera may be too far away from the monitor
Other electronic devices may be interfering with the signal
The camera or monitor may be placed too close to many metal objects The camera and monitor may be too close together The volume on the monitor may be set too high Battery power may be too low Extend the antenna on the monitor The camera and monitor may be too far apart The battery power may be too low The buttons are not working
LOCK/UNLOCK Button is in LOCKED position; move to UNLOCK position Picture works but there is no sound Picture is black and white Volume setting may be too low
Night vision LEDs may be ON; increase the amount of light in the room being The rechargeable battery will not charge
monitored The power adapters may not be connected Battery pack may not be properly connected inside the battery compartment Maintenance
Clean the surfaces of the camera and monitor with a soft, uff-free cloth
Never use cleaning agents or solvents If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openings mylevana.com
SPECIFICATIONS MONITOR Monitor Type Screen Size Resolution Frame Rate LCD Brightness Frequency Private Signal Technology No. of hop/sec No. of hopping channels Channel bandwidth Data Rate Transmission Power Max Transmission Range Optimum Transmission Range Expandable
Scan View Speaker Microphone TFT LCD 3.5 320x240 25 FPS Adjustable: 0,1,2,3,4 2.4GHz Yes Digital FHSS 300 19 3.375 MHz 3 Mbps
+13 dBm 750ft 200ft Up to 4 Cameras 2x Yes, 8 seconds/camera Yes Yes MONITOR Talk to Baby Lullabies Battery Type Yes Yes Li-Ion Battery Capacity Battery Connection 1800 mAH Charging Contact Battery Life (video + audio on) Battery Life (LCD off) 10 hours 10 hours Battery Life (PEEP Mode) Up to 48 hours Battery Low - Visual Warning Battery Low - Audible Warning PEEP Mode (Power Save):
Volume Indicator LED Key Lock Housing Material Power Adapter Input Power Adapter Limited charge voltage Operating Temperature Dimensions Weight Yes Yes Yes Yes Yes ABS Plastic 100~240VAC 6V 800mA DC 4.2V 0 to 50 Degrees Celsius 4 x 1 x 3 0.35 lbs
mylevana.com SPECIFICATIONS CAMERA Image sensor Resolution Viewing Angle Focal Length Optimal Focal Distance
Range of Motion - Horizontal Range of Motion - Vertical Frequency CMOS 640 x 480 50 Degree 2.8mm 2-10ft Yes 300 110 2.4GHz Technology Digital FHSS Max Transmission Range Optimum Transmission Range Number of IR LEDs IR Wavelength Night Vision Distance Battery Operable Microphone Speaker 750ft 200ft 8 940nm 15ft No Yes Yes CAMERA Housing Material Wall Mountable Power Adapter Input Power Adapter ABS Plastic Yes 100~240VAC, 50/60Hz 150mA 6V 800mA DC Operating Temperature 0 to 50 Degree Celsius Dimensions Weight 31/2 x 4 x 4 0.55 lbs FCC FCC ID: SMH32008B FCC ID: SMH-32008B FCC ID: SMH-32008B FCC ID: SMH-30018PU IC IC: 4593A-32008B mylevana.com 22