Quick Start Guide Ai60 - Powered 6.5" Bookshelf Speakers Fluance Ai60 Quick Start Guide Fluance Ai60 Quick Start Guide Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers Follow all instructions. instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit form the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in anyway, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The use of apparatus in moderate climates. CAUTION Minimum 5cm around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. Should be drawn to the environmental aspects of the battery disposal. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Fluance Ai60 Quick Start Guide Prcautions De Scurit Importantes a Lire En Premier Lisez ces instructions. Tenez compte de tous les avertissements. Suivez toutes les instructions. 1. 2. Conservez ces instructions. 3. 4. 5. Nutilisez pas cet appareil prs de leau. 6. Nettoyer uniquement avec un chiffon sec. 7. Ne bloquez aucune ouverture de ventilation. Installez conformment aux instructions du fabricant. 8. Ne pas installer proximit de sources de chaleur telles que des radiateurs, des registres de chaleur, des poles ou dautres appareils (y compris des amplificateurs) qui produis-
ent de la chaleur. 9. Ne dtournez pas le but de scurit de la prise polarise ou de mise la terre. Une fiche polarise comporte deux pales dont une plus large que lautre. Une fiche de type la terre a deux lames et une troisime broche de mise la terre. La lame large ou la troisime broche sont fournies pour votre scurit. Si la fiche fournie ne rentre pas dans votre prise, consultez un lectricien pour le remplacement de la sortie obsolte. 10. Protgez le cordon dalimentation avant dtre pitin ou pinc en particulier sur les bouchons, les prises de courant et le point o ils sortent de lappareil. 11. Nutilisez que des accessoires / accessoires spcifis par le fabricant. 12. Utilisez uniquement avec le chariot, le support, le trpied, le support ou la table spcifis par le fabricant ou vendus avec lappareil. Lorsquun chariot est utilis, soyez prudent lorsque vous dplacez la combinaison panier / appareil pour viter les blessures causes par le renversement. 13. Dbranchez cet appareil pendant les orages ou lorsquil nest pas utilis pendant de longues priodes. 14. Rfrer tous les services un personnel qualifi. Un entretien est ncessaire lorsque lappareil a t endommag de toute faon, comme le cordon dalimentation ou la fiche est endommag, le liquide a t renvers ou les objets sont tombs dans lappareil, lappareil a t expos la pluie ou lhumidit, sil ne fonctionne pas normalement ou sil est tomb. 15. Lutilisation dappareils dans les climats modrs. ATTENTION 5cm minimale autour de lappareil pour une aration suffisante. il convient que laeration ne soit pas gne par lobstruction des ouvertures daration par des objets tels que journaux, nappes, rideaux, etc... il convent de ne pas placer sur lappareil de sources de flammes nues, telles que des bougies allumes. il convent dattirer lattention sur les problmes denvironnement dus la mise au dchet des piles. le mode demploi doit stipuler que lappareil ne doit pas tre expos des gouttements deau ou des claboussures et de plus quaucun objet rempli de liquide tel que des vases ne doit tre plac sur lappareil. Un avertissement selon lequel les batteries (bloc de batteries ou batteries installes) ne doivent pas tre exposes une chaleur excessive telle que celle du soleil, dun feu ou dorigine simi-
laire. lorsque la prise du RESEAU DALIMENTATION ou une prise place sur lappareil est utilise comme appareil de dconnecxion, cet appareil doit demeurer aisment accessible. Fluance Ai60 Quick Start Guide Introduction Thank you for your purchase of your Fluance product. We hope you enjoy your experience. If you have any questions please visit us at www.Fluance.com/support. Fluance has successfully revolutionized the home audio industry. Fluance develops a broad line of high-fidelity products based on five key aspects: Sound Quality, Solid Construction, Performance, Style, and Value. These distinctive points make Fluance the most reliable and respected name among our fans and ensure your music is heard the way your favorite artist intended. Today, Fluance expands on this vision and takes its approach to a new level. With our dedicated team, Fluance assures its products meet the most stringent marks of quality control - overseeing each step from design to manufacturing - and has raised the industry bar in customer experience and quality to be second-to-none. Break-in Period Our speakers have a Butyl rubber ring surrounding the cone. The break-in period allows the rubber to loosen and stretch, allowing the cone a larger range of movement, resulting in better sound reproduction. We recommend 10-12 hours of play at moderate volume to achieve this. For additional product information, please consult the manual at:
Fluance.com/support Whats Included VOL +
VOL -
+
TREBLE
+
BASS Ai60 Passive Speaker Ai60 Active Speaker
(Left Channel)
(Right Channel) Remote Control 2 AAA Batteries Power Adapter Speaker Wire AUX-to-RCA Quick Start Lifetime Cable Guide Customer Support 2 Year Warranty LIFETIME Customer Support Fluance Ai60 Quick Start Guide Front & Back Panel Layout Active Speaker Passive Speaker 1. Control Knob Volume Input Selection Power ON/OFF 2. Source LED Blue (Solid) - Bluetooth Paired Blue (Flashing) - Bluetooth Pairing Mode Yellow (Solid) - RCA White (Solid) - Optical Purple (Solid) - USB Red (Solid) - Standby Mode Red (Flashing) - Mute Red (Flash x1) - Max Volume Red (Flash x2) - Bass/Treb Set to -6 or +6 Source Color: Blue/Yellow/White/Purple
(Flash x2) - Bass/Treb Set to 0 3. IR Sensor 4. Speaker Input 5. Bluetooth Reset Pairing 6. USB Input (Audio Playback Only) 7. Optical Input 8. RCA Input 9. Subwoofer Output 10. Left Speaker Output 11. DC Input Remote Control Layout 12. Power ON/OFF 13. Volume UP/DOWN 14. Source 15. Treble UP/DOWN 16. Mute 17. Play/Pause & Bluetooth Pairing Reset*
*To enable Bluetooth Pairing Reset, press + hold for 3 seconds. 18. Forward/Back 19. LED Brightness - (100% > 25% > OFF) 20. Bass UP/DOWN 1 2 3 4 Active Speaker (Back) 5 6 7 8 9 10 11 12 13 14 15 VOL +
VOL -
+
TREBLE
+
BASS 16 17 18 19 20 Fluance Ai60 Quick Start Guide Product Setup 1. Position the speakers with the Active Speaker on the right and the Passive Speaker on the left. Passive Speaker Active Speaker NOTE: If placing the speakers in a cabinet or on a shelf, position the front of the speakers as close as possible to the front edge of the shelf for optimum audio performance. 2. Connect one end of the speaker wire to the binding posts on the back of the Active Speaker and connect the other end of speaker wire to the binding posts on the back of the Passive Speaker. IMPORTANT: Ensure the same wire is connected to the same color binding post on each speaker. 3. Connect the power adapter to the back of the Active Speaker. Passive Speaker Active Speaker Loosen the binding post Insert speaker wire through hole Tighten the binding post Fluance Ai60 Quick Start Guide EQ Adjustment Use the Bass/Treble buttons on the Remote to adjust each from -6 to +6. LED Behavior:
Red (Flash 2x) - Bass/Treble Set to -6 or +6 Source Color (Flash 2x) - Bass/Treble Set to 0 Note: If using a source device, with its own EQ settings, ensure it is set to flat(0). RCA Input 1. Connect the RCA cable to your source device (Turntable, Smart-
phone, Computer). 2. Connect the other end of the RCA cable to back of the Active Speaker.
*RCA to RCA cable not included 3. Press the Control Knob to select the RCA input (Yellow LED). 4. Adjust volume on Ai60 as well as source device. Fluance Ai60 Quick Start Guide Bluetooth Pairing 1. Press the Control Knob to select the Bluetooth input (Blue LED). 2. Pair to Fluance Ai60 on your source device. Settings Bluetooth MY DEVICES Fluance Ai60 Note: Unit will attempt to auto-pair to the last paired device. 3. Use the Remote to control playback 4. on your source device. If your device cannot find Fluance Ai60, you can reset Bluetooth pairing. VOL +
VOL -
Press and hold Remote for 3 seconds to reset Bluetooth pairing. on the OR Press and hold the Bluetooth Pairing Reset Button on the back of the unit.
+
TREBLE
+
BASS Note: How you access your devices Bluetooth settings may vary from one manufacturer to another. Maximum line of sight for Bluetooth range is 33ft. Obstacles may decrease transmission distance. Fluance Ai60 Quick Start Guide Optical Input 1. Connect the Optical cable to your source device (TV, Computer, Game Console...). 2. Connect the other end of the Optical cable to the back of the Active Speaker.
*Optical cable not included 3. Press the Control Knob to select the Optical Input (White LED). 4. Adjust the volume on Ai60 as well as source device. Optical Audio Signal Compatibility The Ai60 does not support Dolby Digital Audio or DTS Audio. Locate the audio output settings on your source device and ensure Dolby Digital is turned off. The correct audio output setting is commonly referred to as PCM or Stereo. Some TVs also require that audio output be enabled. This setting may be referred to as External Speakers. Ensure this is selected as your speaker/audio output. For instructions on a specific device, please consult the devices user manual. Fluance Ai60 Quick Start Guide USB Input 1. Connect the USB cable to your source device (Laptop, Desktop...). 2. Connect the other end of the USB cable to the Micro USB port on the back of the Active Speaker. IMPORTANT: The USB input on the Ai60 is for USB audio playback and not for USB charging.
*USB cable not included 3. Press the Control Knob to select the USB Input (Purple LED). 4. Adjust the volume on Ai60 as well as source device. USB Audio Output Settings You may need to enable USB audio output on your source device. Here are the directions for most Windows and Apple Computers. Windows: Control Panel > Sound > USB Audio Apple: System Preferences > Sound > Output > USB It is also important to check that any sound enhancements, effects, or EQ settings are disabled on your source device. Fluance Ai60 Quick Start Guide Subwoofer Output Connect the Subwoofer cable to your powered subwoofer. 1. 2. Connect the other end of the Subwoofer cable to the back of the Active Speaker. 3. Adjust the volume on the Subwoofer for the best listening experience. DB10
*Subwoofer cable not included Fluance offers matching subwoofers for the ultimate audio experience. For more information visit: www.Fluance.com/subwoofer. Frequently Asked Questions What is auto-pairing and how does it work?
Auto-pairing is a convenient connection feature included in all Fluance Bluetooth Speakers. If the connected Bluetooth-enabled device leaves the connection range of the Ai60 and returns at a later time, the device will automatically connect. If the devices Bluetooth function is disabled and then enabled at a later time, the device will automatically connect as well.
*Note: The Fluance Ai60 will only auto-pair to the last device that it was connected to. Another device is connected to my Fluance Ai60 and I want to connect my device. You can reset any Bluetooth connection by pressing and holding the Bluetooth Pairing Reset button on the back of the Active Speaker for 1 second. You can also press and hold Play/Pause on the Remote for 3 seconds. What is the range of my Bluetooth Connection?
The Fluance Ai60 operates with Power Class 2 Bluetooth devices, which have a range of approximately 33 feet (line of sight). What are the power adapter specifications for the Ai60?
Brand: Fluance Model: DQS751-240300-3 Input: AC 100-240V~50/60Hz 2A Output: DC 24V 3.0A Fluance Ai60 Quick Start Guide Certification Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC Warning This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Fluance Ai60 Quick Start Guide Warranty Information Fluance gives the following warranty to the original customer of each new Fluance product purchased from a dealer authorized by Fluance. Fluance warrants that each new product, under normal use, is free from defects, subject to the terms and conditions set forth. If a defect should occur within the warranty period, repairs will be made free of charge for parts and labor when such defects are determined by us to be attributable to faulty materials or workmanship at time of manufacture. Warranty Period The Fluance products listed below are warranted for parts and labor for the stated period from the date of original purchase and are subject to the terms and conditions of the warranty. Home Audio Passive Speakers: Lifetime Warranty Active/Powered Speakers: 2 Year Warranty HiFi Turntables: 2 Year Warranty Warranty Exclusions Products purchased from a dealer not authorized by Fluance. Products with the serial number defaced, altered or missing. Defects resulting from disaster, accident, abuse, misuse, lightning, power surges, neglect, unauthorized modification or water damage. Defects or damage as a result of repairs performed by a person or party not authorized by Fluance. Defects or damage occurring during shipping (claims should be made with the shipping company). To Obtain Warranty Service Should your Fluance product require warranty service, please contact your Fluance Autho-
rized Dealer and send your product fully insured and freight prepaid to the nearest Fluance authorized service center. Before sending to Fluance, you will be required to get a Return Authorization Number from your dealer. Products shipped without a valid Return Authorization Number will be refused. To avoid possible shipping damage, make sure the product is properly packaged and well protected. Include a copy of your original bill of sale as proof of warranty along with your name, home and/or work telephone number(s), a complete return address and a detailed description of the faults. Products repaired within warranty will be returned freight prepaid. This warranty in itself is not considered a valid proof of purchase. When applying for warranty repairs, you must present the original copy of your bill of sale as proof of warranty. Fluance Ai60 Quick Start Guide Fluance Ai60 Quick Start Guide Fluance.com Fluance Ai60 Quick Start Guide