Ai81 Powered Floorstanding Speakers Quick Start Guide v1.0 FCC ID:SMH-AI81 IC:4593A-AI81 Important Safety Instructions Follow all instructions. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit form the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in anyway, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The use of apparatus in moderate climates. CAUTION Minimum 5cm around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. Should be drawn to the environmental aspects of the battery disposal. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Prcautions De Scurit Importantes a Lire En Premier 1. Lisez ces instructions. 2. Conservez ces instructions. 3. 4. Tenez compte de tous les avertissements. Suivez toutes les instructions. 5. Nutilisez pas cet appareil prs de leau. 6. Nettoyer uniquement avec un chiffon sec. teurs) qui produisent de la chaleur. 7. Ne bloquez aucune ouverture de ventilation. Installez conformment aux instructions du fabricant. 8. Ne pas installer proximit de sources de chaleur telles que des radiateurs, des registres de chaleur, des poles ou dautres appareils (y compris des amplifica-
9. Ne dtournez pas le but de scurit de la prise polarise ou de mise la terre. Une fiche polarise comporte deux pales dont une plus large que lautre. Une fiche de type la terre a deux lames et une troisime broche de mise la terre. La lame large ou la troisime broche sont fournies pour votre scurit. Si la fiche fournie ne rentre pas dans votre prise, consultez un lectricien pour le remplacement de la sortie obsolte. 10. Protgez le cordon dalimentation avant dtre pitin ou pinc en particulier sur les bouchons, les prises de courant et le point o ils sortent de lappareil. 13. Dbranchez cet appareil pendant les orages ou lorsquil nest pas utilis pendant de longues priodes. 14. Rfrer tous les services un personnel qualifi. Un entretien est ncessaire lorsque lappareil a t endommag de toute faon, comme le cordon dalimen-
tation ou la fiche est endommag, le liquide a t renvers ou les objets sont tombs dans lappareil, lappareil a t expos la pluie ou lhumidit, sil ne 11. Nutilisez que des acces soires / accessoires spcifis par le fabricant. 12. Utilisez uniquement avec le chariot, le support, le trpied, le support ou la table spcifis par le fabricant ou vendus avec lappareil. Lorsquun chariot est utilis, soyez prudent lorsque vous dplacez la combinaison panier / appareil pour viter les blessures causes par le renversement. fonctionne pas normalement ou sil est tomb. 15. Lutilisation dappareils dans les climats modrs. ATTENTION 5cm minimale autour de lappareil pour une aration suffisante. il convient que laeration ne soit pas gne par lobstruction des ouvertures daration par des objets tels que journaux, nappes, rideaux, etc... il convent de ne pas placer sur lappareil de sources de flammes nues, telles que des bougies allumes. il convent dattirer lattention sur les problmes denvironnement dus la mise au dchet des piles. le mode demploi doit stipuler que lappareil ne doit pas tre expos des gouttements deau ou des claboussures et de plus quaucun objet rempli de liquide tel que des vases ne doit tre plac sur lappareil. Un avertissement selon lequel les batteries (bloc de batteries ou batteries installes) ne doivent pas tre exposes une chaleur excessive telle que celle du lorsque la prise du RESEAU DALIMENTATION ou une prise place sur lappareil est utilise comme appareil de dconnecxion, cet appareil doit demeurer soleil, dun feu ou dorigine similaire. aisment accessible. Fluance Ai81 Quick Start Guide Introduction Thank you for your purchase of your Fluance product. We hope you enjoy your experience. If you have any questions please visit us at www.Fluance.com/support. Fluance believes everyone should experience audio in its truest form, recreating the performance the way the artist intended. Utilizing only superior components and expert audio engineering, their products are a testament to the performance that can be achieved when a passion for music takes center stage. The perfect complement to any audiophiles lifestyle, youll be enjoying live performances in your home for years to come. Our speakers have a Butyl rubber ring surrounding the cone. The break-in period allows the rubber to loosen and stretch, allowing the cone a larger range of movement, resulting in better sound reproduction. We recommend 10-12 hours of play at moderate volume to achieve this. For additional product information, please consult the manual at: Fluance.com/resources Break-in Period Whats Included VOL +
VOL -
TREBLE
BASS LIFETIME Customer Support Ai81 Passive Speaker
(Left Channel) Ai81 Active Speaker
(Right Channel) Remote Control 2 AAA Batteries Power Cable Speaker Wire Quick Start Guide Lifetime Customer Support 2 Year Warranty Fluance Ai81 Quick Start Guide Front & Back Panel Layout 1. Control Knob Volume Input Selection Power ON/OFF 2. Source LED Blue (Solid) - Bluetooth Paired Blue (Flashing) - Bluetooth Pairing Mode Green (Solid) - RCA 1 Purple (Solid) - RCA 2 White (Solid) - Optical Red (Solid) - Standby Mode Red (Flashing) - Mute 2 Active Speaker Passive Speaker 1 3 4 Active Speaker (Back) Active Speaker (Back) 3. IR Sensor 4. Speaker Input 5. Optical Input 6. RCA Input 1 7. RCA Input 2 8. Subwoofer Output 9. Bluetooth Reset Pairing 10. Left Speaker Output 11. AC Input 12. Fuse (T3.15AL 250V) 13. Power Switch Remote Control Layout 1. Power ON/OFF 2. Volume UP/DOWN 3. Source 5. Mute 4. Treble UP/DOWN 5 6 7 10 11 6. Play/Pause & Bluetooth Pairing Reset*
*To enable Bluetooth Pairing Reset, press + hold for 3 seconds. 7. Forward/Back 9. Bass UP/DOWN 8. LED Brightness - (100% > 25% > OFF) 1 2 3 4 VOL +
VOL -
TREBLE
BASS 5 6 7 8 9 9 8 13 12 Fluance Ai81 Quick Start Guide Product Setup 1. Position the speakers with the Active Speaker on the right and the Passive Speaker on the left. Passive Speaker Active Speaker NOTE: If placing the speakers near a wall, it is recommended to keep 6-12inches away from the wall. 2. Connect one end of the speaker wire to the binding posts on the back of the Active Speaker and connect the other end of speaker wire to the binding posts on the back of the Passive Speaker. IMPORTANT: Ensure the same wire is connected to the same color binding post on each speaker. NOTE: The included speaker wire is 12ft. If placing your speakers further than 12ft apart it is recommended to use standard 18 gauge speaker wire to connect the speakers over the longer distance. 3. Connect the power cable to the back of the Active Speaker and set the power switch to the ON position. Passive Speaker Active Speaker Loosen the binding post Insert speaker wire through hole Tighten the binding post Fluance Ai81 Quick Start Guide Use the Bass/Treble buttons on the Remote to adjust each from -5 to +5. Red (Flash 2x) - Bass/Treble Set to -5 or +5 Source Color (Flash 2x) - Bass/Treble Set to 0 Note: If using a source device, with its own EQ settings, ensure it is set to flat(0). EQ Adjustment LED Behavior:
RCA Input 1. Connect the RCA cable to your source device (Turntable, Smartphone, Computer). 2. Connect the other end of the RCA cable to back of the Active Speaker.
*RCA to RCA cable not included 3. Press the Control Knob to select the RCA input (RCA 1 - Green; RCA 2 -
Purple). VOL +
4. Adjust volume on Ai81 as well as source device.
OR Press the Source button on the remote control. VOL -
TREBLE
BASS Fluance Ai81 Quick Start Guide Optical Input 1. Connect the Optical cable to your source device (TV, Computer, Game Console...). Ensure protective caps are removed from the ends of the Optical cable. 2. Connect the other end of the Optical cable to the back of the Active Speaker.
*Optical cable not included 3. Press the Control Knob to select the Optical Input (White LED). 4. Adjust the volume on Ai81 as well as source device. VOL +
OR Press the Source button on the remote control. VOL -
Optical Audio Signal Compatibility
The Ai81 does not support Dolby Digital Audio or DTS Audio. Locate the audio output settings on your source device and ensure Dolby Digital is turned off. The correct audio output setting is TREBLE commonly referred to as PCM or Stereo. BASS Some TVs also require that audio output be enabled. This setting may be referred to as External Speakers. Ensure this is selected as your speaker/audio output. For instructions on a specific device, please consult the devices user manual. Fluance Ai81 Quick Start Guide<group>
Bluetooth Pairing 1. Press the Control Knob to select the Bluetooth input (Blue LED). 2. Pair to Fluance Ai81 on your source device. VOL +
Settings Bluetooth MY DEVICES Fluance Ai81 OR VOL -
Press the Source button on the remote control. 3. Use the Remote to control playback 4. on your source device. Note: Adjust Volume on the source device as well as the Ai81.
BASS TREBLE VOL +
VOL -
Note: Unit will attempt to auto-pair to the last paired device. If your device cannot find Fluance Ai81, you can reset Bluetooth pairing. Press and hold on the Remote for 3 seconds to reset Bluetooth pairing. OR Press the Bluetooth Pairing Reset Button on the back of the unit.
TREBLE BASS Note: How you access your devices Bluetooth settings may vary from one manufacturer to another. Maximum line of sight for Bluetooth range is 33ft. Obstacles may decrease transmission distance. Fluance Ai81 Quick Start Guide Subwoofer Output IMPORTANT: When a subwoofer cable is connected, the Ai81 will automatically cut frequencies below 80Hz to optimize performance. The subwoofer cable must be removed to resume full frequency playback. Connect the Subwoofer cable to your powered subwoofer. 1. 2. Connect the other end of the Subwoofer cable to the back of the Active Speaker. 3. Adjust the volume on the Subwoofer for the best listening experience. DB10
*Subwoofer cable not included Fluance offers matching subwoofers for the ultimate audio experience. For more information visit: www.Fluance.com/subwoofer. Frequently Asked Questions Why is there no sound from the Ai81 when connected to
*Note: The Fluance Ai81 will only auto-pair to the last device at a later time, the device will automatically connect as well. the Optical input?
that it was connected to. Many digital audio sources feature Dolby Audio which is not supported by the Ai81. Ensure your devices audio output is set Another device is connected to my Fluance Ai81 and I want to Stereo or PCM. See page 7 for more information. to connect my device. What do I do if audio is only coming from the active speaker?
The most common cause of no audio from one speaker is a Remote for 3 seconds. poor connection. Ensure the metal portion of the speaker wire is in direct contact with the binding posts. You can reset any Bluetooth connection by pressing the Bluetooth Pairing Reset button on the back of the Active Speaker. You can also press and hold Play/Pause on the How can I increase the volume when using the Ai81 with a turntable?
If turntable audio is too quiet you may need to add a pream-
plifier. Some turntables have built in preamps which can be turned on or off. The Fluance PA10 preamplifier is a great match for Fluance powered speakers and turntables. Why is the volume from each input different on the Ai81?
Ensure that any volume and EQ settings on your source devices are set to similar levels. The different signal types used by each input means they are processed differently by the Ai81. The Optical Input uses a digital signal while the RCA Input uses an analog signal. These differences can result in slight variances in the output volume of the Ai81. What do I do if my remote control is not working?
Replace the batteries in the remote with a new set. Ensure you are pointing the remote at the IR sensor on the Active (right) Speaker and that nothing is blocking the sensor. What is auto-pairing and how does it work?
Auto-pairing is a convenient connection feature included in all Fluance Bluetooth Speakers. If the connected Bluetooth-en-
abled device leaves the connection range of the Ai81 and returns at a later time, the device will automatically connect. If the devices Bluetooth function is disabled and then enabled Fluance Ai81 Quick Start Guide Certification Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC Warning This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Fluance Ai81 Quick Start Guide Warranty Information FCC Statement Thank you for choosing Fluance! We guarantee your investment in our products is a solid one. High performance components combined with quality craftsmanship allow us to maintain the highest possible production standards.All items are guaranteed against defects in materials and craftsmanship. Fluance has outstanding quality control; if something should go wrong with any of our products, we will repair it free of charge within the warranty period. If the product cannot be repaired, we will replace the product. If the product has been discontinued, we will replace the product with either the newest version of said product or current equivalent. In the event that Fluance replaces a product under warranty, the replacement would only carry the original warranty from the original date of purchase. Warranty Period The Fluance products below are warrantied for parts and labor for the stated period from date of original purchase, and are subject to the terms and conditions of the warranty. Any refurbished products that are discontinued hold a 90 day warranty from the date of original purchase. Fluance warranties are valid for the original owner and are non-transferable. Home Audio Passive Speakers: Lifetime Warranty Active or Powered Speakers: Two Year Warranty HiFi Turntables: Two Year Warranty Batteries (For Powered Speakers): One Year Warranty Warranty Exclusions:
Products purchased from a dealer not authorized by Fluance. Products with the serial number defaced, altered, or missing. Defects resulting from disaster, accident, abuse, misuse, lightning, power surges, neglect, unauthorized modification or water damage. Defect or damage as a result of repairs performed by a person or party not authorized by Fluance. Defects of damage occurring during shipping (claims should be made with the shipping company). Defect or damage as a result of connecting a product to an outlet with the incorrect voltage. Voltage converters must be used where applicable. To Obtain Warranty Service Should your product require warranty service, please contact us at www.fluance.com/contact or call us at 1-888-617-6863 to set up a Return Authorization. Products returned without a valid Return Authorization number will be refused. Fluance products must be returned in their original packaging. Our products are packaged specially to protect them from any damage during shipping, and without this packaging the return shipment could get damaged. This warranty does not cover the shipping cost, insurance, or any other incidental charges. Products shipped for warranty service must be pre-paid by the customer, and Fluance will cover the cost to ship the repaired or replaced product back to the customer. Fluance Ai81 Quick Start Guide Thank you for your purchase of this Fluance product. We hope you enjoy your experience. Questions?
Give us a chance to help, were just a click away. Fluance.com/resources Fluance.com/support Fluance.com/videos Fluance.com/contact Dont forget to register your product with us!
Fluance.com/registration