all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual | Users Manual | 751.77 KiB | July 08 2002 | |||
1 | Cover Letter(s) | July 08 2002 | ||||||
1 | Cover Letter(s) | July 08 2002 | ||||||
1 | External Photos | July 08 2002 | ||||||
1 | Internal Photos | July 08 2002 | ||||||
1 | ID Label/Location Info | July 08 2002 | ||||||
1 | Operational Description | July 08 2002 | ||||||
1 | Cover Letter(s) | July 08 2002 | ||||||
1 | RF Exposure Info | July 08 2002 | ||||||
1 | ID Label/Location Info | July 08 2002 | ||||||
1 | Schematics | July 08 2002 | ||||||
1 | Test Report | July 08 2002 | ||||||
1 | Test Setup Photos | July 08 2002 |
1 | Manual | Users Manual | 751.77 KiB | July 08 2002 |
Instant WirelessTM Series Wireless PCI Card Use this Guide to install the following:
WMP11 User Guide COPYRIGHT & TRADEMARKS Copyright 2001 Linksys, All Rights Reserved. Instant Wireless is a registered trade-
mark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Instant Wireless Wireless PCI Card is free from physical defects in material and workmanship for one year from the date of purchase, when used within the limits set forth in the Specification section of this User Guide. If these products prove defective during this warranty period, call Linksys Customer Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF PUR-
CHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PUR-
CHASE. When returning a product, mark the Return Authorization Number clearly on the outside of the package and include your original proof of purchase. All customers locat-
ed outside of the United States of America and Canada shall be held responsible for shipping and handling charges. IN NO EVENT SHALL LINKSYS LIABILITY EXCEED THE PRICE PAID FOR THE PROD-
UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-
AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-
WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statuto-
ry, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, mer-
chantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individ-
ual or entity. Please direct all inquiries to:
Linksys P.O. Box 18558, Irvine, CA 92623. FCC STATEMENT This product have been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment or device Connect the equipment to an outlet other than the receivers Consult a dealer or an experienced radio/TV technician for assistance Instant WirelessTM Series Wireless PCI Card Introduction Table of Contents Introduction The Instant WirelessTM Wireless PCI Card Features Package Contents System Requirements Planning Your Wireless Network Network Topology Roaming Installing the Drivers and Configuration Utility for Windows 95, 98, ME and 2000 Before You Start Running the Auto Driver Installation Ad-Hoc Versus Infrastructure Mode Infrastructure Mode Ad-Hoc Mode Installing the Wireless PCI Card Installing the Drivers and Configuration Utility for Windows NT Overview Installing the Drivers for Windows NT Installing the Configuration Utility for Windows NT Configuration Utility Using the Configuration Utility Installing Network Protocols Troubleshooting Common Problems and Solutions Frequently Asked Questions Glossary Specifications Environmental Warranty Information Contact Information 1 1 1 2 2 3 3 3 4 4 4 8 9 11 14 15 15 15 29 30 30 37 39 39 39 43 48 48 49 50 The Instant WirelessTM Wireless PCI Card Put the mobile back into mobile computing! Whether youre at your desk or in the boardroom, the Linksys Instant Wireless Wireless PCI Card allows you to share printers, files, and other resources anywhere within your LAN infra-
structure, increasing your productivity and keeping you in touch. The Instant Wireless Wireless PCI Card now has a high-powered antenna that provides greater ranges than ever. Error correction in the chipset keeps you operating at higher transmission rates for longer distances. Ready to run in PCs running Windows 95, 98, Millennium, NT, and 2000, the Instant Wireless Wireless PCI Card from Linksys is truly a must-have for all PC users. Features Integrated Equalizer Recovers Weak Signals and Enhances Sensitivity 11 Mbps High-Speed Data Transfer Rate Compatible with Virtually All Major Network Operating Systems Plug-and-Play Operation Provides Easy Setup Sturdy Metal Design with Integrated Antenna Works with All Standard Internet Applications Clear Channel Assessment Increases Network Throughput Hardware Buffer Chaining Provides High Performance While Reading and Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant Equipment Writing Buffers Capable of up to 128-Bit WEP Free Technical Support24 Hours a Day, 7 Days a Week for North America Only 1-Year Limited Warranty 1 Instant WirelessTM Series Wireless PCI Card Planning Your Wireless Network Network Topology A wireless LAN is exactly like a regular LAN, except that each computer in the LAN uses an Instant Wireless Wireless PCI Card to connect to the network using no wires. Computers in a wireless LAN must be configured to share the same radio channel. The Instant Wireless Wireless PCI Card provides LAN access for wireless workstations. An integrated wireless and wired LAN is called an Infrastructure configuration. A group of Wireless PCI Card users and an Access Point com-
pose a Basic Service Set (BSS). Each PC equipped with an Wireless PCI Card in a BSS can talk to any computer in a wired LAN infrastructure via the Access Point. An infrastructure configuration extends the accessibility of an Wireless PCI Card PC to a wired LAN, and doubles the effective wireless transmission range for two Wireless PCI Card PCs. Since the Access Point is able to forward data within its BSS, the effective transmission range in an infrastructure LAN is doubled. The use of a unique ID in a Basic Service Set is essential. The Wireless LAN Infrastructure configuration is appropriate for enterprise-
scale wireless access to a central database, or as a wireless application for mobile users. Roaming Infrastructure mode also supports roaming capabilities for mobile users. More than one BSS can be configured as an Extended Service Set (ESS). This con-
tinuous network allows users to roam freely within an ESS. All Wireless PCI Card PCs within one Extende Service Set must be configured with the same SSID. Selecting a feasible radio channel and optimum Access Point position is rec-
ommended. Proper Access Point positioning combined with a clear radio sig-
nal will greatly enhance performance. Package Contents One Instant WirelessTM Wireless PCI Card One Setup CD-ROM (Manual on CD) Quick Installation Guide and Registration Card (not shown) System Requirements One Free PCI Slot Windows 95, 98, Millennium, NT or 2000 600 Kbytes of free disk space for utility and driver installation 2 3 Instant WirelessTM Series Wireless PCI Card Installing the Drivers and Configuration Utility for Windows 95, 98, ME and 2000 Before You Start Your new Instant Wireless Wireless PCI Card comes with an automated soft-
ware installation procedure for Windows 95, 98, Millennium, and 2000. Windows NT users should refer to the next section. This new procedure auto-
matically installs the drivers and Configuration Utility before you install your hardware, so theres no searching for the location of drivers. Again, this step is taken before installing your hardware. Running the Auto Driver Installation 1. Before installing your adapter, insert the Setup CD into your CD-ROM drive. Unless you have deactivated the auto-run feature of Windows, the following screen should appear automatically. 2. The first tab across the top of the screen, labeled Install, should now be high-
lighted. Click on the Install button. The following screen should appear, indicating that Windows is preparing the installation. If, for whatever reason, you need to abort or terminate the installation, press the Cancel button at any time during the installation. Otherwise the instal-
lation will continue automatically. Note: If you stop the installation before it has finished, you will have to run the installation completely again before installing your hardware. 3. This screen will appear next, indicating that Windows is ready to continue the installation. Click the Next button. If this screen does not appear automatically, you can access the installation by pressing the Start button and choosing Run. In the drop down box pro-
vided, type D:\setup.exe (where D: is the letter of your CD-ROM drive). Alternately, double-click My Computer, and then double-click the CD-
ROM drive where the Setup CD is located. Then double-click the Setup.exe icon that appears. 4 5 Instant WirelessTM Series Wireless PCI Card 4. The next screen that appears will be the Warranty Policy. Read the entire policy by pressing the Page Down button on your keyboard. Click on the Yes button if you agree, or No if you disagree. Clicking No will terminate the installation. If you click Yes, the installation will continue. 6. When the following screen appears, choose either Infrastructure mode or Ad-Hoc mode, depending on your needs. If you are unsure whether to choose Infrastructure or Ad-Hoc, refer to the next section for more informa-
tion. Once you have made your choice, click the Next button. 5. The following window will appear next. To install the Configuration Utility in the default directory (recommended), click the Next button. If you pre-
fer to install the Utility in another directory, click the Browse button, locate the preferred directory then click the Next button. 6 7 Ad-Hoc versus Infrastructure Mode Infrastructure Mode Instant WirelessTM Series Wireless PCI Card 1. If you have chosen Infrastructure mode, the following screen will appear. If you have chosen Ad-Hoc mode, skip to the next section. You will be prompted to enter an SSID value in the box provided. The SSID may be up to 32 characters in length and may include any character on the keyboard. All SSID values on your wireless network must match. If you are unsure, use the default value of linksys. Then, click the Next but-
ton. Note: All characters are case-sensitive. 2. The next screen to appear will be the Review Settings screen. Verify that all the settings are correct and click the Next button to continue. Unlike wired networks, wireless networks have two different modes in which they may be set up: Infrastructure and Ad-Hoc. Choosing between these two modes depends on whether or not the wireless network needs to share data or peripherals with a wired network or not. If the computers on the wireless network need to be accessible by a wired net-
work or need to share a peripheral, such as a printer, with the wired network computers, the wireless network should be set up in the Infrastructure mode. The basis of Infrastructure mode centers around an access point, which serves as the main point of communications in a wireless network. Access points transmit data to PCs equipped with wireless network card, which can roam within a certain radial range of the access point. Multiple access points can be arranged to work in succession to extend the roam-
ing range, and can be set up to c o m m u n i c a t e with your Ethernet hardware as well. If the wireless network is relatively small and needs to share resources only with the other computers on the wireless network, then the Ad-Hoc mode can be used. Ad-Hoc mode allows computers equipped with wireless transmitters and receivers to communicate directly with each other, eliminating the need for an access point. The drawback of this mode is in the fact that, in Ad-Hoc mode, wireless-equipped computers are not able to communicate with computers on a wired network. And, of course, communica-
tion between the wire-
less-equipped comput-
ers is limited by the dis-
tance and interference directly between them. 8 9 Instant WirelessTM Series Wireless PCI Card 3. The following screen will appear, indicating that all of the appropriate files are being copied onto your drive. Click the Cancel button if you need to stop the installation for any reason. Ad-Hoc Mode 1. If you have chosen Ad-Hoc mode, the following screen will appear. If you have chosen Infrastructure mode, refer to the previous section. 4. Once Windows has finished copying the necessary files, the following screen will appear. In order for the drivers to be installed properly, you must restart your computer. If you choose to do it now, select Yes, I want to restart my computer now. If you do not want to do it now, choose No, I will restart my computer later. Once you have made your choice, click the Finish button to continue. You will be prompted to choose a Channel from the list provided. All computers on your wireless network must be using the same channel in order to communicate with each other. If you are unsure about which chan-
nel to use, select the default channel (Channel 6). Once you have chosen your channel, click the Next button. Note: Restart the computer and go to the section called Installing the Wireless PCI Card for further instructions. 10 11 Instant WirelessTM Series Wireless PCI Card 2. The following screen should appear. You will be prompted to enter an SSID value in the box provided. All SSID values on your wireless network must match. If you are unsure, use the default value of linksys. Then, click the Next button. 4. The following screen will appear, indicating that all of the appropriate files are being copied onto your drive. Click the Cancel button if you need to stop the installation for any reason. 3. The next screen to appear will be the Review Settings screen. Verify that all the settings are correct and click the Next button to continue. 5. Once Windows has finished copying the necessary files, the following screen will appear. In order for the drivers to be installed properly, you must restart your computer. If you choose to do it now, select Yes, I want to restart my computer now. If you do not want to do it now, choose No, I will restart my computer later. Once you have made your choice, click the Finish button to continue. 12 13 Note: Restart the computer and go to the section called Installing the Wireless PCI Card for further instructions. Instant WirelessTM Series Wireless PCI Card Installing the Wireless PCI Card Installing the Wireless PCI Card In Your Desktop PC 1. Turn off your desktop PC. 2. Open your PC case and locate an available PCI slot on the motherboard. Check with your computer manufacturer for instructions. 3. Slide the Wireless PCI Card into the PCI slot. Make sure that all of its pins are touching the slot's contacts. You may have to apply a bit of pressure to slide the card all the way in. After the card is firmly in place, secure its fastening tab to your PC's chassis with a mounting screw. Then, close your PC. 4. Attach the external antenna to the cards antenna port. 5. Power on your desktop PC. The Hardware Installation is complete. Your Wireless PCI Card is set up and ready for use. You may continue reading to learn about the cards Configuration Utility in the Configuration Utility section. Installing the Drivers and Configuration Utility for Windows NT Overview The installation of the Wireless PCI Card is different for users of Windows NT because it is not a Plug-and-Play(PnP) system, which means it will not auto-
matically detect the presence of the Wireless PCI Card when it is inserted. Consequently, the order of the installation is different. The steps involved in the installation are different, as well. If you are using any other operating sys-
tem than Windows NT, stop here and refer to the section called Installing the Drivers and Configuration Utility for Windows 95, 98, ME, and 2000. Installing the Drivers for Windows NT Windows NT will setup the Wireless PCI Card differently depending upon whether youve previously installed network hardware or not. Please follow the instructions appropriate for you. If You Have Never Installed Network Hardware:
1. Windows NT is not a Plug-and-Play Operating System and will not auto-
matically identify the Wireless PCI Card. To begin setup, insert the Setup Utility CD into your CD-ROM drive. If the Setup Utility CD attempts to autorun, exit out of the utility to the desktop. Then select Settings from the Start Menu and bring up the Control Panel. Then, double-
click on the Network icon. 14 15 2. Windows will notify you that Networking is not installed. Click the Yes but-
ton to continue. (If Networking is already installed, proceed to If You Have Installed Network Hardware Before.) 4. The next screen will not show any Network Adapters installed on your sys-
tem, which signifies that no network hardware has been previously installed. Click the Select from list button to continue. Instant WirelessTM Series Wireless PCI Card 3. Installation will begin and you will reach the screen shown below. You will want to select the box that reads Wired to the network since you are adding network hardware. Then, click the Next button to continue. 5. A list of adapters will appear on the next screen. You will not want to select one of these, however, as your installation disk
(Setup Utility CD) has all of the appro-
priate drivers. Click the Have Disk but-
ton to continue. 6. When the Insert Disk screen appears, type D:\WINNT in the field provided. Then, click the OK button to continue. 16 17 Instant WirelessTM Series Wireless PCI Card 7. The Select OEM Option screen will display all available adapters. Make sure that Instant Wireless PCI Card is highlighted and click the OK button to continue. 9. The next screen will show a list of network protocols. While the TCP/IP Protocol is already selected by default, you should check with your network administrator before installing any additional network protocols. Click the Next button to continue. 8. On the next screen, make sure there is a check mark in the box beside Instant Wireless PCI Card. Then click the Next button to continue. 10. On the screen showing Network Services, the selections are automatically made. Click the Next button to continue. 18 19 Instant WirelessTM Series Wireless PCI Card 11. At this point, Windows NT will be ready to start installing Networking Components. After verifying your selections, click the Next button to con-
tinue. Or, click the Back button to make any necessary corrections. 13. You will now reach the screen shown here. This is called the Resources &
Properties screen. Your System Administrator if you have one, will give you all the information you need concerning these settings. Adjust the set-
tings as are appropriate and click the OK button. 12. Windows NT may request further files at this point. Type D:\WINNT in the field provided and the Continue button. click If files are still requested, insert your Windows NT CD into your CD-
ROM drive and D:\i386 type
(where D repre-
sents your CD-
ROM drive). Then, click the Continue button. 20 14. After setting the Resource and Properties fields, Windows NT will begin installing the network components you previously selected. You may be asked if you would like to configure the protocols with a DHCP server on your network. If this screen comes up, check with your Network Administrator before clicking the Yes or No button to continue. This set-
ting may also be changed at a later time. 21 Instant WirelessTM Series Wireless PCI Card 15. Now, the network components will finish installing. If a screen similar to that shown here appears, be sure to check with your network administrator before making ANY changes and then click the Next button to continue. 17. On this screen, you will enter your Computer Name, which is how your computer will be identified on the network. You will also assign the com-
puter to either a Workgroup or Domain, whichever is appropriate. The Computer Name must be different than any other on the Workgroup or Domain. Click the Next button. 16. At this point, Windows NT will let you know that it is ready to start the network. If youd like to stop the procedure, click the Back button. To con-
tinue, click the Next button. 18. Once the drivers have been installed, the following screen may appear. 22 23 Instant WirelessTM Series Wireless PCI Card Make sure that the Instant Wireless Wireless PCI Card appears in the Adapter window. Then, unless you need to assign a static IP address, select Obtain an IP address from a DHCP server and click the OK button. If you need to assign a static IP address, select Specify and IP Address, and enter the appropriate values under IP Address, Gateway Mask, and Default Gateway. When you have made your choice, click the OK button. Windows NT has now completed installing the network. Remove the Setup CD from the CD-ROM drive and click the Finish button to continue. Then restart your computer. The Driver Installation is complete. Continue now to the section called Installing the Configuration Utility for Windows NT. NOTE: After you have installed the Wireless PCI Card, reapply the Windows NT service pack. If You Have Installed Network Hardware Before:
1. Windows NT is not a Plug-and-Play Operating System and will not auto-
matically identify the Wireless PCI Card. To begin setup, insert the Setup Utility CD into your CD-ROM drive and then select Settings from the Start Menu and bring up the Control Panel. Then, double-click on the Network icon. 2. To add the Wireless PCI Card, you will want to click the Adapters tab and then click the Add button to continue. 3. A list of adapters will appear on the next screen. You will not want to select one of these, howev-
er, as your installa-
(Setup tion disk Utility CD) has all of the appropriate drivers. Click the Have Disk button to continue. 24 25 Instant WirelessTM Series Wireless PCI Card 7. The Wireless PCI Card has now been installed. You will see it added onto this screen. Click the Close button to continue and then restart your computer. installed you NOTE: After the have Wireless PCI Card, reapply the Windows NT service pack. Once the installation has com-
pleted, the following screen may appear, depending on the configuration of your comput-
er. 4. On the Insert Disk screen, type D:\WINNT in the field provided. Then, click the OK button to continue. 5. The Select OEM Option screen will display all available adapters. Make sure that Instant Wireless PCI Card is highlighted and click the OK button to continue. Your 6. You will now reach the screen shown below. This is called the Resources & Properties screen. System Administrator will give you all the information you need concerning these settings. If you System Administrator, or just need more information concern-
ing these settings, refer to the section called Configuring the Wireless PCI Card for Windows NT. Adjust the settings as are appropriate and click the OK button. the are 26 27 Instant WirelessTM Series Wireless PCI Card If the window does appear, make sure that the Instant Wireless Wireless PCI Card appears in the Adapter window. Then, unless you need to assign a static IP address, select Obtain an IP address from a DHCP server and click the OK button. If you need to assign a static IP address, select Specify and IP Address, and enter the appropriate values under IP Address, Gateway Mask, and Default Gateway. When you have made your choice, click the OK button. Windows NT has now completed installing the drivers. Remove the Setup CD from the CD-ROM drive and click the Finish button to continue. Then restart your computer. The Driver Installation is complete. Continue now to the section called Installing the Configuration Utility for Windows NT. Installing the Configuration Utility for Windows NT Once you have restarted your computer, the drivers for the Card should load successfully. Now it is necessary to install the Configuration Utility. Insert the Setup CD in the CD-ROM drive. Unless you have deactivated the auto-
run feature of Windows, the following screen should appear automatically. If this screen does not appear automatically, you can access the installation by pressing the Start button and choosing Run. In the drop down box provided, type D:\setup.exe (where D: is the letter of your CD-ROM drive). Alternately, double-click My Computer, and then double-click the CD-ROM drive where the Setup CD is located. Then double-click the Setup.exe icon that appears. Follow the instructions that appear on your screen. If you have any questions or difficulty, refer to the section called Installing the Drivers and Configuration Utility for Windows 95, 98, ME and 2000. 28 29 Configuration Utility Instant WirelessTM Series Wireless PCI Card LINK INFO The Configuration Utility is provided to allow you further customization of the Wireless PCI Card and your wireless network. Using the Configuration Utility Once the Configuration Utility has been installed, an icon will be placed in the system tray (next to the clock) when the Wireless PCI Card is inserted. This icon (which looks like a small computer) serves two pur-
poses. Double-clicking on the icon will open the Configuration Utility. The other function of the icon is to indicate the status of your wireless connection. The icon does this by changing color. The different colors each indicate a different quality of wireless connection. The chart below details what the colors are and what each one means. The Link Info screen provides information about the current link between the Wireless PCI Card and the wireless Access Point. Note: When in Ad-Hoc mode, Link Quality and Signal Strength indicators will not be available. Note: In Ad-Hoc mode, the icon will always appear green. When in this mode, the icon color does not apply to the Link Quality and Signal Strength of the wireless connection. The Current Channel field shows to what channel the Wireless PCI Card is set. The Current Transmit Rate field shows the transfer rate in megabits per second. You can also start the Configuration Utility by pressing the Start button and selecting Wireless PCI Card. Then choose Configuration Utility. You will see the Wireless LAN Configuration Utility screen. This utility is divided into four parts: Link Info, Configuration, Site Survey, Encryption, Advanced, and About. It is recommended that you change all configuration settings for your Wireless PCI Card using this utility and not under the Network Properties sec-
tion in your Control Panel. The Throughput fields show the rate at which data is transferred and received in Bytes per second. The Link Quality field will display a bar indicating the percentage, between 0 and 100 percent, of the quality of the link. The higher the percentage, the better the link. The Signal Strength field will display a bar indicating the percentage, between 0 and 100 percent, of the strength of the signal. The higher the percentage, the stronger the signal. (This is to be used as a guide only and not an indicator true signal strength or quality.) 30 31 Instant WirelessTM Series Wireless PCI Card CONFIGURATION The Configuration screen allows you to customize the settings for the Wireless PCI Card and your wireless network. Once these are set, you can save these configuration settings with the Profile function. Click Create to save your con-
figuration settings and Activate to use these settings. To delete settings you have saved, use the Remove button. The Wireless Mode setting determines the architecture of your wireless net-
work. Select Ad-Hoc or Infrastructure Mode depending on your network type. The Ad-Hoc mode is used for a simple peer-to-peer network and allows the sharing of local resources only between Wireless PCI Cards without need-
ing a wireless Access Point. The Infrastructure mode allows a wireless net-
work to be integrated into an existed, wired network through an Access Point. Infrastructure networks permit roaming between Access Points while main-
taining a connection to all network resources. An acronym for Service Set Identifier, SSID is the unique name shared among all points in a wireless network. The SSID must be identical for all points in the network. It is case sensitive and must not exceed 32 characters. The Transfer Rate field shows the current transfer rate for the Wireless PCI Card. To optimize performance and range, the TX Rate should be set to Fully Automatic, which will automati-
cally the transfer speed for best performance and longest range. adjust Power Saving Mode, PS Mode, or enables or disables the power saving features of your Wireless PCI Card. 32 The Channel setting specifies the channel used in wireless communication and should be set to the same channel as the other points in the wireless network. This setting can only be adjusted in Ad-Hoc mode. ENCRYPTION The 64-bit or 128-bit WEP keys can be generated from a user-defined passphrase or entered manually. An acronym for Wired Equivalent Privacy, WEP is an encryption scheme used to protect your wireless data communications. WEP uses a combination of 64-
bit or 128-bit keys to provide access control to your network and encryption security for every data transmission. To decode a data transmission, each point in a network must use an identical 64-bit or 128-bit key. Higher encryption levels mean higher levels of security, but, due to the complexity of the encryp-
tion, they may mean decreased network performance. Encryption (WEP) can be Disabled, or set to 64-bit or 128-bit encryption as a hexadecimal number for each key that you wish to encrypt. Make sure that the values entered in these fields for WEP is identical to the encryption keys used on the other wireless devices on the network. 33 Instant WirelessTM Series The Default Key can then be set by selecting any of the four keys that have been entered in the Manual Entry fields. That key will then be the one used auto-
matically by the Wireless PCI Card. Once you have chosen your key encryption method and entered either the Passphrase or manual key, click the Apply Changes button Then click the OK button and the encryption portion of the setup is complete. To undo these changes, click the Undo Changes button. Note: Make sure that the values entered in these fields for WEP are identical to the encryption keys used on the other wireless devices on the network. You can also restore the cards default settings by clicking the Restore Defaults button. ENCRYPTION The Site Survey tab will show you that available Access Points and their fea-
tures. Click on the desired Access Point, then click Connect to connect or Search to search for more Access Points. Click OK when you are finished. Wireless PCI Card ADVANCED The Advanced tab allows you to set the Fragmentation Threshold, the RTS/CTS Threshold, and the Preamble Type. The Fragmentation Threshold Value indicates how much of the network resources are devoted to recovering packet errors. The value should remain at its default setting of 2,436. If you experience high packet error rates, you can decrease this value, but it will like-
ly decrease overall network performance. Only minor modifications of this value are recommended. The RTS Threshold Value should remain at its default setting of 2,437. A pre-
amble is a signal used to synchronize the transmission timing between two or more systems. A series of transmission pulses is sent before the data to indi-
cate that "someone is about to transmit data". This ensures that systems receiv-
ing the information correctly interpret when the data transmission starts. Security is used for WEP only. By selecting Deny Unencrypted Data Frames, all unencrypted data will not be seen. For Authentication Type, you may choose between Open System or Shared Key. 34 35 Instant WirelessTM Series Wireless PCI Card Shared Key is when both the sender and recipient share a secret key. Both units use this key for an extended length of time, sometimes indefinitely. Any eaves-
dropper that discovers the key may decipher all packets until the key is changed. Open System, the default setting, is when the sender and the recipient do not share a secret key. Each party generates its own key-pair and asks the receiver to accept the (usually randomly) generated key. Once accepted, this key is used for a short time only, then a new key is generated and agreed upon. Even if the secret key is discovered, only a small amount of data may be decrypted. The Preamble Mode should be set to Long (if in a noisy network environ-
ment), Short (if the environment is clear), or click OK to complete the con-
figuration ABOUT The About screen shows the release information for the Driver Version, Configuration Utility Version, and Firmware Version. You can also connect directly to the Linksys web site with your active internet connection by click-
ing the button showing the internet address at the bottom of the screen. Installing Network Protocols Protocols are necessary for computers to communicate on your network. 1. From the Start Menu, select Settings and bring up the Control Panel. From the Control Panel, double-click on the Network icon. 2. Select the Wireless PCI Card from the list and click the Add button. 36 37 Instant WirelessTM Series Wireless PCI Card 3. Highlight Protocol and click the Add button. the 4. Select Microsoft from list of Manufacturers and TCP/IP from the list of Network Protocols and click the OK but-
ton. 5. Repeat steps two through four to install other protocols such as NetBEUI or IPX/SPX. From the screen in step two, you can also press the Properties button. From this screen, you can verify that the drivers are working under Enhanced Mode on the Driver Type tab or reconfig-
ure the card on the Advanced tab. At this point, you must restart computer. Installation is complete. your Troubleshooting Common Problems and Solutions This chapter provides solutions to problems usually occurring during the instal-
lation and operation of the Wireless PCI Card. Read the description below to solve your problems. If you cant find an answer here, check the Linksys web-
site at www.linksys.com. 1. The Wireless PCI Card does not work properly. Reinsert the Wireless PCI Card into your PCs PCI slot. Right click on My Computer and select Properties. Select the device man-
ager and click on the Network Adapter. You will find the Wireless PCI Card if it is installed successfully. If you see the yellow exclamation mark, the resources are conflicting. You will see the status of the Wireless PCI Card. If there is a yellow question mark, please check the following:
Make sure your PC has a free IRQ. Make sure you have inserted the right card and installed the proper driver. If the Wireless PCI Card does not function after attempting the above steps, remove the card and do the following:
Uninstall the driver software from your PC. Restart your PC and repeat the hardware and software installation as specified in this User Guide. 3. I cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration. Make sure that the notebook PC to which the Wireless PCI Card is associat-
ed is powered on. Make sure that your Wireless PCI Card is configured on the same channel and with the same security options as with the other computers in the Infrastructure configuration. Frequently Asked Questions Can I run an application from a remote computer over the wireless net-
work?
This will depend on whether or not the application is designed to be used over a network. Consult the application's user guide to determine if it supports oper-
ation over a network. 38 39 Instant WirelessTM Series Wireless PCI Card Can I play multiplayer games with other members of the wireless network?
Yes, as long as the game supports multiple players over a LAN (local area net-
work). Refer to the game's user guide for more information. What is IEEE 802.11b standard?
The IEEE 802.11b Wireless LAN standards subcommittee, which is formulat-
ing a standard for the industry. The objective is to enable wireless LAN hard-
ware from different manufacturers to communicate. What IEEE 802.11b features are supported?
The product supports the following IEEE 802.11b functions:
CSMA/CA plus Acknowledge protocol Multi-Channel Roaming Automatic Rate Selection RTS/CTS feature Fragmentation Power Management What is Ad-Hoc?
An Ad-Hoc wireless LAN is a group of computers, each with a WLAN adapter, connected as an independent wireless LAN. Ad hoc wireless LAN is applica-
ble at a departmental scale for a branch or SOHO operation. What is Infrastructure?
An integrated wireless and wired LAN is called an Infrastructure configura-
tion. Infrastructure is applicable to enterprise scale for wireless access to cen-
tral database, or wireless application for mobile workers. What is Roaming?
Roaming is the ability of a portable computer user to communicate continu-
ously while moving freely throughout an area greater than that covered by a sin-
gle Access Point. Before using the roaming function, the workstation must make sure that it is the same channel number with the Access Point of dedicat-
ed coverage area. To achieve true seamless connectivity, the wireless LAN must incorporate a number of different functions. Each node and Access Point, for example, must always acknowledge receipt of each message. Each node must maintain contact with the wireless network even when not actually transmitting data. Achieving these functions simultaneously requires a dynamic RF networking technology that links Access Points and nodes. In such a system, the users end node under-
takes a search for the best possible access to the system. First, it evaluates such factors as signal strength and quality, as well as the message load currently being carried by each Access Point and the distance of each Access Point to the wired backbone. Based on that information, the node next selects the right Access Point and registers its address. Communications between end node and host computer can then be transmitted up and down the backbone. As the user moves on, the end nodes RF transmitter regularly checks the sys-
tem to determine whether it is in touch with the original Access Point or whether it should seek a new one. When a node no longer receives acknowl-
edgment from its original Access Point, it undertakes a new search. Upon find-
ing a new Access Point, it then reregisters, and the communication process con-
tinues. What is BSS ID?
A specific Ad hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID. What is ESS ID?
An Infrastructure configuration could also support roaming capability for mobile workers. More than one BSS can be configured as an Extended Service Set (ESS). Users within an ESS could Roam freely between BSSs while served as a continuous connection to the network wireless stations and Access Points within an ESS must be configured with the same ESS ID and the same radio channel. What is ISM band?
The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available worldwide. This presents a truly revolutionary opportunity to place convenient high-speed wireless capabilities in the hands of users around the globe. What is Spread Spectrum?
Spread Spectrum technology is a wideband radio frequency technique devel-
oped by the military for use in reliable, secure, mission-critical communica-
tions systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum
(DSSS) and Frequency Hopping Spread Spectrum (FHSS). 40 41 Instant WirelessTM Series What is DSSS? What is FHSS? And what are their differences?
Frequency-Hopping Spread-Spectrum (FHSS) uses a narrowband carrier that changes frequency in a pattern that is known to both transmitter and receiver. Properly synchronized, the net effect is to maintain a single logical channel. To an unintended receiver, FHSS appears to be short-duration impulse noise. Direct-Sequence Spread-Spectrum (DSSS) generates a redundant bit pattern for each bit to be transmitted. This bit pattern is called a chip (or chipping code). The longer the chip, the greater the probability that the original data can be recovered. Even if one or more bits in the chip are damaged during trans-
mission, statistical techniques embedded in the radio can recover the original data without -the need for retransmission. To an unintended receiver, DSSS appears as low power wideband noise and is rejected (ignored) by most nar-
rowband receivers. Would the information be intercepted while transmitting on air?
WLAN features two-fold protection in security. On the hardware side, as with Direct Sequence Spread Spectrum technology, it has the inherent security fea-
ture of scrambling. On the software side, WLAN series offer the encryption function (WEP) to enhance security and Access Control. Users can set it up depending upon their needs. Can Instant WirelessTM products support printer sharing?
Instant WirelessTM products perform the same function as LAN products. Therefore, Instant Wireless products can work with NetWare, Windows 2000, or other LAN operating systems to support printer or file sharing. What is WEP?
WEP is Wired Equivalent Privacy, a data privacy mechanism based on a 40 bit shared key algorithm, as described in the IEEE 802.11b standard. Wireless PCI Card Glossary Ad-hoc Network - An ad-hoc network is a wireless network or other small net-
work in which some of the network devices are part of the network only for the duration of a communications session while in some close proximity to the rest of the network. Default Gateway - The router used to forward all traffic that is not addressed to a station within the local subnet. DHCP (Dynamic Host Configuration Protocol) - A protocol that lets network administrators manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's network. Using the Internet's set of protocol (TCP/IP), each machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users with a con-
nection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address must be entered manually at each computer and, if computers move to another location in another part of the network, a new IP address must be entered. DHCP lets a network administrator supervise and dis-
tribute IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network. DHCP uses the concept of a "lease" or amount of time that a given IP address will be valid for a computer. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. It's espe-
cially useful in education and other environments where users change fre-
quently. Using very short leases, DHCP can dynamically reconfigure networks in which there are more computers than there are available IP addresses. DHCP supports static addresses for computers containing Web servers that need a permanent IP address. DNS - The domain name system (DNS) is the way that Internet domain name are located and translated into Internet Protocol (IP) addresses. A domain name is a meaningful and easy-to-remember "handle" for an Internet address. 42 43 Instant WirelessTM Series Wireless PCI Card DSSS - Also known as Direct Sequence Spread Spectrum, this is a variety of radio transmission methods that continuously change frequencies or signal pat-
terns. Direct sequence spread spectrum (DSSS), which is used in CDMA, mul-
tiplies the data bits by a very fast pseudo-random bit pattern (PN sequence) that
"spreads" the data into a large coded stream that takes the full bandwidth of the channel Dynamic IP Address - An IP address that is automatically assigned to a client station in a TCP/IP network, typically by a DHCP server. Network devices that serve multiple users, such as servers and printers, are usually assigned static IP addresses. ESS - More than one BSS in a network. FHSS - Also known as Frequency Hopping Spread Spectrum. Frequency hopping spread spectrum (FHSS) continuously changes the center frequency of a conventional carrier several times per second according to a pseudo-random set of channels, while chirp spread spectrum changes the carrier frequency. Because a fixed frequency is not used, illegal monitoring of spread spectrum signals is extremely difficult, if not downright impossible depending on the particular method. Firmware - Programming that is inserted into programmable read-only mem-
ory (programmable read-only memory), thus becoming a permanent part of a computing device. IEEE - The Institute of Electrical and Electronics Engineers. The IEEE describes itself as "the world's largest technical professional society -- promot-
ing the development and application of electrotechnology and allied sciences for the benefit of humanity, the advancement of the profession, and the well-
being of our members."
IP Address - In the most widely installed level of the Internet Protocol (IP) today, an IP address is a 32-binary digit number that identifies each sender or receiver of information that is sent in packet across the Internet. When you request an HTML page or send e-mail, the Internet Protocol part of TCP/IP includes your IP address in the message (actually, in each of the packets if more than one is required) and sends it to the IP address that is obtained by looking up the domain name in the Uniform Resource Locator you requested or in the e-mail address you're sending a note to. At the other end, the recipient can see the IP address of the Web page requestor or the e-mail sender and can respond by sending another message using the IP address it received. IPCONIFG - A utility that provides for querying, defining and managing IP addresses within a network. A commonly used utility, under Windows NT and 2000, for configuring networks with static IP addresses. ISP - An ISP (Internet service provider) is a company that provides individuals and companies access to the Internet and other related services such as Web site building and virtual hosting. LAN - A local area network (LAN) is a group of computers and associated devices that share a common communications line and typically share the resources of a single processor or server within a small geographic area (for example, within an office building). MAC Address - The MAC (Media Access Control) address is your computer's unique hardware number. mIRC - mIRC runs under Windows and provides a graphical interface for log-
ging onto IRC servers and listing, joining and leaving channels. Network Mask - also known as the Subnet Mask. The IEEE fosters the development of standards that often become national and international standards. The organization publishes a number of journals, has many local chapters, and several large societies in special areas, such as the IEEE Computer Society. PCMCIA - The PCMCIA (Personal Computer Memory Card International Association) is an industry group organized in 1989 to promote standards for a credit card-size memory or I/O device that would fit into a personal computer, usually a notebook or laptop computer. Infrastructure - An infrastructure network is a wireless network or other small network in which the wireless network devices are made a part of the network through the Access Point which connects them to the rest of the network. Ping - (Packet INternet Groper) An Internet utility used to determine whether a particular IP address is online. It is used to test and debug a network by send-
ing out a packet and waiting for a response. 44 45 Instant WirelessTM Series Wireless PCI Card UTP - Unshielded twisted pair is the most common kind of copper telephone wiring. Twisted pair is the ordinary copper wire that connects home and many business computers to the telephone company. To reduce crosstalk or electro-
magnetic induction between pairs of wires, two insulated copper wires are twisted around each other. Each signal on twisted pair requires both wires. Since some telephone sets or desktop locations require multiple connections, twisted pair is sometimes installed in two or more pairs, all within a single cable. WEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64-
bit shared key algorithm, as described in the IEEE 802.11 standard. WINIPCFG - Configuration utility based on the Win32 API for querying, defining and managing IP addresses within a network. A commonly used util-
ity, under Windows 95, 98, and Millennium, for configuring networks with static IP addresses. RJ-45 - A connector similar to a telephone connector that holds up to eight wires, used for connecting Ethernet devices. Roaming - The ability to use a wireless device and be able to move from one access points range to another without losing the connection. Static IP Address - A permanent IP address that is assigned to a node in a TCP/IP network. Subnet Mask - The method used for splitting IP networks into a series of sub-
groups, or subnets. The mask is a binary pattern that is matched up with the IP address to turn part of the host ID address field into a field for subnets. TCP (Transmission Control Protocol) - A method (protocol) used along with the Internet Protocol (Internet Protocol) to send data in the form of message units between computers over the Internet. While IP takes care of handling the actual delivery of the data, TCP takes care of keeping track of the individual units of data (called packet) that a message is divided into for efficient routing through the Internet. TCP/IP - Transmission Control Protocol/Internet Protocol (TCP/IP) is the basic communication language or protocol of the Internet. It can also be used as a communications protocol in a private network (either an intranet or an extranet). When you are set up with direct access to the Internet, your comput-
er is provided with a copy of the TCP/IP program just as every other computer that you may send messages to or get information from also has a copy of TCP/IP. UDP (User Datagram Protocol) - A communications method (protocol) that offers a limited amount of service when messages are exchanged between com-
puters in a network that uses the Internet Protocol (IP). UDP is an alternative to the Transmission Control Protocol (TCP) and, together with IP, is sometimes referred to as UDP/IP. Like the Transmission Control Protocol, UDP uses the Internet Protocol to actually get a data unit (called a datagram) from one com-
puter to another. Unlike TCP, however, UDP does not provide the service of dividing a message into packets (datagrams) and reassembling it at the other end. Specifically, UDP doesn't provide sequencing of the packets that the data arrives in. This means that the application program that uses UDP must be able to make sure that the entire message has arrived and is in the right order. Network applications that want to save processing time because they have very small data units to exchange (and therefore very little message reassembling to do) may prefer UDP to TCP. 46 47 Specifications Warranty Information Instant WirelessTM Series Wireless PCI Card Standards:
Channels:
Operating Range:
Indoors:
Outdoors:
IEEE 802.11b 11 Channels (US, Canada) 13 Channels (Europe) 14 Channels (Japan) up to 30M (100 ft.) @ up to 11 Mbps up to 50M (165 ft.) @ up to 5.5 Mbps up to 70M (230 ft.) @ up to 2 Mbps up to 91M (300 ft.) @ up to 1 Mpbs up to 152M (500 ft.) @ up to 11 Mbps up to 270M (885 ft.) @ up to 5.5 Mbps up to 396M (1300 ft.) @ up to 2 Mbps up to 457M (1500 ft.) @ up to 1 Mbps Data Rate (Mbps):
up to 11Mbps (with automatic scale back) LEDs:
Link, Power Environmental Dimensions:
4.5 x 2 x .3 (115mm x 54mm x 8mm) Unit Weight:
1.65 oz. (47g) Power:
3.3V or 5V DC, 275mA Tx, 225mA Rx, 200mA Standby Certifications:
FCC Class B, CE Mark Commercial Operating Temp.:
32F to 131F (0C to 55C) Storage Temp.:
-4F to 158F (-20C to 70C) Operating Hum.:
0% to 90% Non-Condensing Storage Hum.:
0% to 95% Non-Condensing 48 BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. IN NO EVENT SHALL LINKSYS LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCU-
MENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PROD-
UCT. LINKSYS OFFERS CROSS SHIPMENTS, A FASTER PROCESS FOR PRO-
CESSING AND RECEIVING YOUR REPLACEMENT. LINKSYS PAYS FOR UPS GROUND ONLY. ALL CUSTOMERS LOCATED OUTSIDE OF THE UNITED STATES OF AMERICA AND CANADA SHALL BE HELD RESPONSIBLE FOR SHIPPING AND HANDLING CHARGES. PLEASE CALL LINKSYS FOR MORE DETAILS. 49 Contact Information Instant WirelessTM Series For help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Internet addresses below. Sales Information Tech Support RMA Issues Fax Email Web FTP Site 800-546-5797 (LINKSYS) 866-242-8558 949-261-1288 949-261-8868 support@linksys.com http://www.linksys.com ftp.linksys.com 50 http://www.linksys.com Copyright 2001 Linksys, All Rights Reserved.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2002-08-07 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2002-08-07
|
||||
1 | Applicant's complete, legal business name |
Cisco-Linksys, LLC
|
||||
1 | FCC Registration Number (FRN) |
0006267462
|
||||
1 | Physical Address |
17401 Armstrong Ave.
|
||||
1 |
Irvine, CA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@americanTCB.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
PKW
|
||||
1 | Equipment Product Code |
WMP11-V27
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** Y******
|
||||
1 | Title |
Associate Engineer
|
||||
1 | Telephone Number |
949-7********
|
||||
1 | Fax Number |
949-2********
|
||||
1 |
j******@linksys.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Advance Data Technology Corporation
|
||||
1 | Name |
V****** W********
|
||||
1 | Physical Address |
13-1, Lane 19, WenShan 3rd St
|
||||
1 |
Taoyuan, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
+886 ******** Extension:
|
||||
1 | Fax Number |
+886 ********
|
||||
1 |
v******@adt.com.tw
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Instant Wireless PCI Card | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
R******** C****
|
||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0170000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC