wsb24 quick install-1.qxd 2002/12/11 U 01:14 Page 1 Instant Wireless Wireless Signal Booster WSB24 Minimum Requirements One of the following Linksys products:
Wireless Access Point, WAP11 Wireless Router, BEFW11S4 Package Contents One Linksys Wireless Signal Booster Two Signal Booster Cables One Power Adapter One Quick Installation guide Note: The images in this document show the Wireless Signal Booster being con-
nected to an Access Point; the same directions can be followed when connecting the Wireless Signal Booster to a wireless Router. Connecting the Wireless Signal Booster to Your Linksys Access Point/Router A. With your Access Point/Router powered off, place the Wireless Signal Booster on top of the Access Point/Router. B. Disconnect the Access Points/Routers antennas. D. Connect the antennas to the Wireless Signal Boosters antenna ports. B C. Connect the Signal Booster Cables from the Access Points/Routers anten-
na ports to the Wireless Signal Boosters cable ports. The Wireless Signal Booster with Access Point C D E. Connect the appropriate power adapters to both the Access Point/Router and Wireless Signal Booster. E F. Now you are ready to use the Wireless Signal Booster in your wireless network. W W W . L I N K S Y S . C O M QI-WSB24-10/25/02NC BW wsb24 quick install-1.qxd 2002/12/11 U 01:14 Page 2 COPYRIGHT & TRADEMARKS Copyright c 2002 Linksys, All Rights Reserved. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Wireless Signal Booster WSB24 is free from physical defects in material and workmanship under normal use for one years from the date of purchase. If the product proves defective during this warranty period, call Linksys Customer Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization Number clearly on the out-
side of the package and include a copy of your original proof of purchase. All cus-
tomers outside of the United States of America and Canada shall be held responsi-
ble for shipping and handling charges. IN NO EVENT SHALL LINKSYS LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DEFECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSE-
QUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT ISSUE REFUNDS. WARRANTY DOES NOT COVER NATURAL DISASTERS OR ACTS OF NATURE. Linksys makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the contents use of this documentation and all accompany-
ing software, and specially disclaims its quality, performance, merchantability, or fit-
ness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. Please direct all inquiries to :
Linksys P.O.Box 18558, Irvine, CA 92623 CAUTION : ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED IN THIS MANUAL COULD VOID YOUR AUTHORIZATION TO USE THIS DEVICE. This device should be operated at least 2.0m away from any person FCC STATEMENT The Wireless Signal Booster WSB24 has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Regulatory information / Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television inter-
ference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the respon-
sibility of the user to correct any interference caused by such unauthorized modifica-
tion, substitution or attachment. Manufacturer and its authorized resellers or distribu-
tors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. CAUTION: To maintain compliance with FCCsRF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. MPE Statement (Safety Information) Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal. Safety Information In order to maintain compliance with the FCC RF exposure guidelines, this equip-
ment should be installed and operated with minimum distance 20cm between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. Caution Statement of the FCC Radio Frequency Exposure This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247(b)(4) addressing RF Exposure from radio frequency devices. The radiation output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation-as a mobile or portable device but use in a body-worn way is strictly prohibit. When using this device, a cer-
tain separation distance between antenna and nearby persons has to be kept to ensure RF exposure compliance. In order to comply with the RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20cm. Contact Information For help with the installation or operation of this product, contact Linksys Technical Support at one of the phone numbers or Internet addresses below. Sales Information Technical Support RMA Issues Fax Email Web FTP Site 800-546-5797 (LINKSYS) 888-326-7114 949-261-1288 949-261-8868 support@linksys.com http://www.linksys.com ftp.linksys.com WSB24 - color sleeve size A :
286mm W x 243mm H x 66mm D)
(11.25 W x 9.569 H x 2.613 D) Rev. NC - posted on ftp 10/25/02:
New sku per Frank Lin PM sign:__ ___ Frank Lin B r o a d b a n d & W i r e l e s s N e t w o r k i n g Wireless Wireless Signal Booster Signal Booster Specifications Model Number WSB24 Standards IEEE 802.11b Peak Gain
+14 dBm Receiver Gain
+20 dBm (nomial) TX input power
+5 dBm (min) -
+20dBm (max) Connectors Two RP SMA and Two RP TNC LEDs Power: Green when power is applied to device Dimensions (W x H x D) 7.31" x 1.88" x 6.88
(186 mm x 48 mm x 175 mm) Warranty 1-Year Limited Instant Wireless Series Model No. WSB24 B r o a d b a n d & W i r e l e s s N e t w o r k i n g Instant Wireless Series Model No. WSB24 Wireless Wireless Signal Booster Signal Booster 2.4 GHz 802.11b Data Rate: 11Mbps Wireless Wireless Signal Booster Signal Booster Increase the range of your Wireless LAN!
B r o a d b a n d & W i r e l e s s N e t w o r k i n g Wireless Wireless Signal Booster Signal Booster Linksys World Headquarters:
17401 Armstrong Ave. Irvine, CA 92614 USA World Wide Web http://www.linksys.com Email sales@linksys.com support@linksys.com Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, please visit our Worldwide Web Site at www.linksys.com Linksys is a Registered Trademark of The Linksys Group, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Copyright 2002 Linksys. All rights reserved. Made In Taiwan Instant Wireless Series Model No. WSB24 Increases the effective range of your Linksys 802.11b Access Point or Wireless Router Stronger signal improves throughput by reducing retransmissions Save on wiring costsincrease your wireless coverage into hard-to-reach areas Simple installationstack, connect, and go Instant Wireless Series Model No. WSB24 B r o a d b a n d & W i r e l e s s N e t w o r k i n g Instant Wireless Series Model No. WSB24 Wireless Wireless Signal Booster Signal Booster