all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual Part 1 | Users Manual | 1.99 MiB | ||||
1 |
|
Manual Part 2 | Users Manual | 2.07 MiB | ||||
1 |
|
Manual Part 3 | Users Manual | 3.43 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Manual Part 1 | Users Manual | 1.99 MiB |
I n s t a n t W ir e le s s T M S e r ie s Network CardBus Card Use this Guide to install:
WPC12 U s e r G u ide COPYRIGHT & TRADEMARKS Copyright 2002 Linksys, All Rights Reserved. Instant Wireless is a registered trade-
mark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Instant Wireless Network PC Card ver. 3.0 is free from physical defects in material and workmanship for one year from the date of purchase, when used within the limits set forth in the Specifications chapter of this User Guide. If these products prove defective during this warranty period, call Linksys Technical Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCTS PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization Number clearly on the outside of the package and include your original proof of pur-
chase. All customers located outside of the United States of America and Canada shall be held responsible for shipping and handling charges. IN NO EVENT SHALL LINKSYS LIABILITY EXCEED THE PRICE PAID FOR THE PROD-
UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-
AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-
WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statuto-
ry, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, mer-
chantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individ-
ual or entity. Please direct all inquiries to:
Linksys P.O. Box 18558, Irvine, CA 92623. FCC STATEMENT This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receivers Consult a dealer or an experienced radio/TV technician for assistance UG-WPC11 ver. 3.0-011702B KL Instant WirelessTM Series Network PC Card Chapter 9: Advanced Properties Advanced Properties for Windows 95, 98, ME, and 2000 Advanced Properties for Windows NT Chapter 10: Troubleshooting Common Problems and Solutions Frequently Asked Questions Chapter 11: Glossary Chapter 12: Specifications Environmental Chapter 13: Warranty Information Chapter 14: Contact Information 41 41 49 56 56 57 61 68 68 69 70 Table of Contents Chapter 1: Introduction The Instant WirelessTM Network PC Card ver. 3.0 Features Package Contents System Requirements Chapter 2: Planning Your Wireless Network Network Topology Roaming Chapter 3: Installing the Drivers and Configuration Utility for Windows 95, 98, ME and 2000 Before You Start Running the Auto Driver Installation Ad-Hoc Versus Infrastructure Mode Infrastructure Mode Ad-Hoc Mode Chapter 4: Installing the Drivers and Configuration Utility for Windows XP Chapter 5: Installing the Network PC Card Chapter 6: Installing the Drivers and Configuration Utility for Windows NT Overview Installing the Network PC Card in Your Notebook PC Installing the Drivers for Windows NT Installing the Configuration Utility for Windows NT Chapter 7: Configuration Utility Using the Configuration Utility Chapter 8: Installing Network Protocols 1 1 1 2 2 3 3 3 4 4 4 8 9 11 14 16 17 17 17 18 30 30 30 39
1 | Manual Part 2 | Users Manual | 2.07 MiB |
Instant WirelessTM Series Network PC Card Chapter 1: Introduction T he I ns ta nt W ir e le s s T M N e tw o rk P C C a rd v e r. 3 . 0 Put the mobile back into mobile computing! Whether you re at your desk or in the boardroom, the Instant Wireless Network PC Card allows you to share printers, files, and other resources anywhere within your L AN infrastructure, increasing your productivity and keeping you in touch. The Instant Wireless Network PC Card now has a new, higher-powered antenna that provides a greater range than ever. The increased sensitivity helps filter out interference and noise to keep your signal clear. Improved error correction in the chipset keeps you operating at higher transmission rates for longer distances. And, since you only need one Type II or III PCMCIA slot, you re free to use your other slots for additional accessories. R eady to run in Type II or III PCMCIA-equipped notebook PCs running Windows 95, 98, Millennium, NT, 2000, and X P, the Instant Wireless Network PC Card ver. 3.0 is truly a must-have for all notebook PC users. F e a tu r e s Integrated E qualizer R ecovers Weak Signals and E nhances Sensitivity Sturdy Metal Design with Integrated Antenna 11 Mbps High-Speed Data T ransfer R ate Compatible with V irtually All Major Network Operating Systems Plug-and-Play Operation Provides Easy Setup Works with All Standard Internet Applications Clear Channel Assessment Increases Network Throughput Hardware B uffer Chaining Provides High Performance While R eading and Interoperable with IE E E 802.11b (DSSS) 2.4GHz-Compliant E quipment Figure 1-1 P a c k a ge C o n t e n t s One Instant WirelessT M Network PC Card ver. 3.0 One Setup Utility CD-R OM (User Guide on CD) Quick Installation insert and R egistration Card (not shown) S y s te m R e qu ir e m e nts A 16-bit PCMCIA Type II or Type III slot PCMCIA revisions 2.10 compliant card and socket services Windows 95, 98, Millennium, NT, 2000, or X P 600 K bytes of free disk space for utility and driver installation Writing B uffers Capable of up to 128-B it WE P Free Technical Support24 Hours a Day, 7 Days a Week for North America Only 1-Year L imited Warranty 1 2 Instant WirelessTM Series Network PC Card Chapter 2: Planning Your Wireless Network Network Topology A wireless LAN is exactly like a regular LAN, except that each computer in the LAN uses an Instant Wireless Network PC Card ver. 3.0 to connect to the network through a wireless connection. Computers in a wireless LAN must be configured to share the same radio channel. The Instant Wireless Network PC Card ver. 3.0 provides LAN access for wireless workstations. An integrated wireless and wired LAN is called an Infrastructure configuration. A group of Instant Wireless Network PC Card ver. 3.0 users and an Access Point compose a Basic Service Set (BSS). Each PC equipped with an Instant Wireless Network PC Card ver. 3.0 in a BSS can talk to any computer in a wired LAN infrastructure via the Access Point. An infrastructure configuration extends the accessibility of an Instant Wireless Network PC Card ver. 3.0 PC to a wired LAN, and doubles the effective wireless transmission range for two PCs equipped with an Instant Wireless Network PC Card ver. 3.0. Since the Access Point is able to for-
ward data within its BSS, the effective transmission range in an infrastructure LAN is doubled. Roaming Infrastructure mode also supports roaming capabilities for mobile users. More than one BSS can be configured as an Extended Service Set (ESS). This con-
tinuous network allows users to roam freely within an ESS. All PCs, equipped with an Instant Wireless Network PC Card ver. 3.0, within one ESS must be configured with the same ESS ID. Before enabling an ESS with roaming capability, selecting a feasible radio channel and optimum Access Point position is recommended. Proper Access Point positioning combined with a clear radio signal will greatly enhance per-
formance. Chapter 3: Installing the Drivers and Configuration Utility for Windows 95, 98, ME, and 2000 Before You Start Your new Linksys Instant Wireless Network PC Card ver. 3.0 comes with an automated software installation procedure for Windows 95, 98, Millennium, and 2000. Windows NT or XP users should refer to the next section. This new procedure automatically installs the drivers and Configuration Utility before you insert the Card into your PC, so theres no searching for the location of drivers. Again, this step is taken before inserting the Card into your PC. Running the Auto Driver Installation 1. Before installing your card, insert the Setup Utility CD into your CD-ROM drive. Unless you have deactivated the auto-run feature of Windows, the screen shown in Figure 2-1 should appear automati-
cally. Figure 2-1 If this screen does not appear automatically, you can access the installation by clicking the Start button and choosing Run. In the drop-down box pro-
vided, type D:\setup.exe (where D: is the letter of your CD-ROM drive). Alternately, double-click My Computer and double-click the CD-ROM drive where the Setup Utility CD is located. Double-click the Setup.exe icon in the folder that appears. 3 4
1 | Manual Part 3 | Users Manual | 3.43 MiB |
Instant WirelessTM Series Network PC Card 2. The first tab across the top of the screen, labeled Install, should now be high-
lighted. Click the Install button. A screen similar to that shown in Figure 2-2 should appear, indicating that Windows is preparing the installation. 4. Figure 2-4 shows the Warranty Policy screen. Read the entire policy by pressing the Page Down button on your keyboard or by using the on-screen scroll bar. Click on the Yes button if you agree, or No if you disagree. Clicking No will terminate the installation. If you click Yes, the installation will continue. Figure 2-2 If, for whatever reason, you need to abort or terminate the installation, press the Cancel button at any time during the installation. Otherwise the instal-
lation will continue automatically. Note: If you stop the installation before it has finished, you will have to run the installation completely again before installing your hardware. 3. The screen in Figure 2-3 will appear next, indicating that Windows is ready to continue the installation. Click the Next button. Figure 2-3 5 Figure 2-4 5. The screen in Figure 2-5 will appear next, requesting the folder into which the Configuration Utility will be installed. To install the Configuration Utility in the default directo-
ry
(recom-
mended), click the Next but-
ton. If you prefer to install the Utility in another direc-
tory, click the Browse button, and locate the p r e f e r r e d d i r e c t o r y . Then, click the Next button. Figure 2-5 6 Instant WirelessTM Series Network PC Card 6. When the screen shown in Figure 2-6 appears, choose either Infrastructure mode or Ad-Hoc mode. If you are unsure whether to choose Infrastructure or Ad-Hoc, refer to the next section for more information. Once you have made your choice, click the Next button. Figure 2-6 Ad-Hoc versus Infrastructure Mode Unlike wired networks, wireless networks have two different modes in which they may be set up: Infrastructure and Ad-Hoc. Choosing between these two modes depends on whether or not the wireless network needs to share data or peripherals with a wired network or not. If the computers on the wireless network need to be accessible by a wired net-
work or need to share a peripheral, such as a printer, with the wired network computers, the wireless network should be set up in the Infrastructure mode. The basis of Infrastructure mode centers around an access point, which serves as the main point of communications in a wireless network (see Figure 2-7). Access points transmit data to PCs equipped with wireless network cards, which can roam within a certain radial range of the point. access access Multiple points can be arranged to work in succession to extend the roam-
ing range, and can be set up to com-
municate with your Ethernet hardware as well. Figure 2-7 If the wireless network is relatively small and needs to share resources only with the other computers on the wireless network, then the Ad-Hoc mode can be used (shown in Figure 2-8). Ad-Hoc mode allows computers equipped with wireless Network PC Cards to communicate directly with each other, eliminat-
ing the need for an access point. The drawback of this mode is in the fact that, in Ad-Hoc mode, wireless-equipped computers are not able to communicate with computers on a wired network. And, of course, communi-
cation between the wireless-equipped computers is limited by the distance and interference directly between them. Figure 2-8 7 8 Instant WirelessTM Series Network PC Card Infrastructure Mode 1. If you have chosen Infrastructure mode, the following screen (Figure 2-9) will appear. If you have chosen Ad-Hoc mode, skip to the next section, titled Ad-Hoc Mode. 3. The screen shown in Figure 2-11 will appear, indicating the that all of appropriate files are being copied onto your drive. Click the Cancel button if you need to stop the installa-
tion for any reason. Figure 2-11 4. Once Windows has finished copying the necessary files, the screen shown in Figure 2-12 will appear. In order for the drivers to be installed properly, you must restart your computer. If you choose to do it now, select Yes, I want to restart my computer now. If you do not want to do it now, choose No, I will restart my computer later. Once you have made your choice, click the Finish button to continue. Figure 2-9 You will be prompted to enter an SSID value in the box provided. The SSID may be up to 32 characters in length. This may include any character on the keyboard, keeping in mind that the SSID is case sensitive. All SSID values on your wireless network must match. If you are unsure, use the default value of linksys. Then, click the Next button. 2. The Review Settings screen
(Figure 2-10) will appear next. Verify that all the settings are correct and click the Next but-
ton to continue. Figure 2-10 Figure 2-12 Note: Restart the computer and go to Chapter 3:
Installing the Network PC Card for further instructions. 9 10 Instant WirelessTM Series Network PC Card Ad-Hoc Mode 1. If you have chosen Ad-Hoc mode, the following screen will appear. (See Figure 2-13.) If you have chosen Infrastructure mode, refer to the previ-
ous section, titled Infrastructure Mode. 2. The screen shown in Figure 2-14 should appear. You will be prompted to enter an SSID value in the field provided. All SSID values on your wire-
less network must match. If you are unsure, use the default value of linksys. Then, click the Next button. Figure 2-13 You will be prompted to choose a Channel from the list provided. All computers on your wireless network must be using the same channel in order to communicate with each other. If you are unsure about which chan-
nel to use, select the default channel (Channel 6). Once you have chosen your channel, click the Next button. Figure 2-14 3. The next screen to appear (Figure 2-15) will be the Review Settings screen. Verify that all the settings are correct and click the Next button to contin-
ue. 11 Figure 2-15 12 Instant WirelessTM Series Network PC Card 4. The next screen will indicate that all of the appropriate files are being copied onto your drive. (See Figure 2-16.) Click the Cancel button if you need to stop the installation for any reason. Figure 2-16 5. Once Windows has finished copying the necessary files, a screen similar to that shown in Figure 2-17 will appear. In order for the drivers to be installed properly, you must restart your computer. If you choose to do it now, select Yes, I want to restart my computer now. If you do not want to do it now, choose No, I will restart my computer later. Once you have made your choice, click the Finish button to continue. Chapter 4: Installing the Drivers and Configuration Utility for Windows XP Windows XP will automatically walk you through the driver installation process as well as automatically configure the Network PC Card for your wire-
less network. If you have any questions regarding wireless networking on your Windows XP PC, please refer to your Windows XP documentation. To install the Network PC Cards drivers, insert the Setup Utility CD-ROM into your CD-Rom drive and then insert the card into your PCs PCMCIAslot. Windows XP will automatically detect the card and search for the appropriate drivers. The screen in Figure 4-1 will then appear. Figure 2-17 Figure 4-1 Note: Restart the computer and go to Chapter 5:
Installing the Network PC Card for further instructions. Verify that the radio button beside Install the software automatically
(Recommended) is highlighted. If not, click it. Then, click the Next button to continue. 13 14 Instant WirelessTM Series Network PC Card Chapter 5: Installing the Network PC Card 1. Locate an available Type II or Type III PCMCIA slot on your notebook computer. 2. With the Network PC Cards 68-pin connector facing the PCMCIA slot and the Network PC Card label facing up, as shown in Figure 5-1, slide the Network PC Card completely into the PCMCIA slot while the computer is restarting and before the Windows desktop appears. Figure 4-2 appear, The Windows XP compatibility screen will as shown in Figure 4-2. As this card has been tested to work with Windows XP, click the Continue Anyway button to continue. On the final instal-
lation screen, click the Finish button to complete instal-
lation. Figure 4-3 The Hardware Installation is complete. Windows XP automatically detects and configures the Network PC Card for your wireless network. To adjust these settings, refer to your Windows XP doc-
umentation. 3. You may see several screens appear as the driver installation is finalized. This is normal. No input should be necessary, and the screens should dis-
appear when the card is ready for use. The Hardware Installation is complete. Your Wireless Network PCCard is set up and ready for use. You may continue reading to learn about the cards Configuration Utility in Chapter 6 for Windows NT or Chapter 7 for other Windows Operating Systems. 15 16 Instant WirelessTM Series Network PC Card Chapter 6: Installing the Drivers and Configuration Utility for Windows NT Overview The installation of the Network PC Card is different for users of Windows NT because it is not a Plug-and-Play (PnP) operating system. This means it will not automatically detect the presence of the Card when it is inserted. Consequently, the order of the installation is different. The steps involved in the installation are different, as well. If you are using any other operating sys-
tem than Windows NT, stop here and refer to the chapters regarding those oper-
ating systems. Installing the Network PC Card In Your Notebook PC 1. Locate an available Type II or Type III PCMCIA slot on your notebook computer. 2. With the Network PC Cards 68-pin connector facing the PCMCIA slot and the Network PC Card label facing up, slide the Network PC Card completely into the PCMCIA slot while the computer is restarting and before the Windows desktop appears. The Hardware Installation is complete. Proceed to the next section for driver installation. 17 Installing the Drivers for Windows NT Windows NT will set up the Network PC Card differently depending upon whether youve previously installed network hardware or not. Please follow the instructions appropriate for you. If You Have Never Installed Network Hardware:
1. Windows NT is not a Plug-and-Play Operating System and will not auto-
matically identify the Network PC Card. To begin setup, insert the Setup Utility CD into your CD-ROM drive. If the Setup Utility CD attempts to autorun, exit out of the utility to the desktop by clicking the Exit tab. Select Settings from the Start Menu and bring up the Control Panel
(as in Figure 6-1). Double-click the Network icon. shown Figure 6-1 showing 2. Windows will display the screen in Figure 6-
2, that Networking has not been installed. Click the Yes button to con-
tinue. Figure 6-2 18 Instant Wireless Series Network PC Card 3. Installation will begin and you will reach the screen in Figure 6-3. You will want to select the box that reads Wired to the network since you are adding network hardware. Click the Next button to continue. Figure 6-3 4. The screen shown in Figure 6-4 will not show any Network Adapters installed on your system; this signifies that no network adapter has been pre-
viously installed. Click the Select from list button to continue. 5. A list of adapters will appear as in Figure 6-5. You will not want to select one of these, howev-
er, as your installa-
tion disk (the Setup Utility CD) has all of the appropriate drivers. Click the Have Disk button to continue. 6. When the Insert Disk screen appears (shown in Figure 6-6), type D:\WINNT in the field provided and click the OK button to con-
tinue. Figure 6-5 7. The Select OEM Option screen (shown in Figure 6-7) will display all available adapters. Make sure that Instant Wireless - Network PC Card V3.0 is highlighted and click the OK button to continue. Figure 6-6 19 20 Figure 6-4 Figure 6-7 Instant WirelessTM Series Network PC Card 8. On the next screen, make sure there is a check mark in the box beside Instant Wireless - Network PC Card (as shown in Figure 6-8). Then click the Next button to continue. 10. On the screen showing Network Services (Figure 6-10), the selections are automatically made. Click the Next button to continue. Figure 6-8 Figure 6-10 9. The next screen (Figure 6-9) will show the list of network protocols used on your network. While the TCP/IP Protocol is already selected by default, you should check with your network administrator before installing any addi-
tional network protocols. Click the Next button to continue. 11. As displayed in Figure 6-11, Windows NT will now be ready to start installing networking components. After verifying your selections, click the Next button to continue or click the Back button to make any necessary corrections. 21 22 Figure 6-9 Figure 6-11 shown 12. Windows NT may request further files at this point
(as in Figure 6-12). Type D : \ W I N N T
(where D repre-
sents your CD-
ROM drive) in the field provided and click the Continue button. Instant Wireless Series Network PC Card 14. After setting the Resource and Properties fields, Windows NT will begin installing the network components youve selected. You may be presented with the screen shown in Figure 6-14, asking if you would like to configure the protocols with a DHCP server on your network. Click the Yes or No button to continue. This setting may also be changed at a later time. Figure 6-12 Figure 6-14 If files are still requested, insert your Windows NT CD into your CD-ROM drive and type D:\i386 (where D represents your CD-ROM drive). Then, click the Continue button. 13. You will now reach the screen shown in Figure 6-13. This is called the Resources & Properties screen. It is recommended that you leave these options at their default settings. If settings must be changed, it is pre-
ferred that you use the Configuration Utility that came with the Network PC Card. If you must adjust the set-
tings on this screen, refer to Chapter 9:
A d v a n c e d Properties for more information on the A d v a n c e d Properties for Windows NT. Click the OK button to continue. Figure 6-13 15. In the event that the screen shown in Figure 6-15 appears, do not make any changes unless you are proficient with the advanced networking properties of Windows NT. Click the Next button to continue. Figure 6-15 16. At this point, Windows NT will let you know that it is ready to start the net-
work. If youd like to stop the procedure, click the Back button. To contin-
ue, click the Next button. 23 24 Instant WirelessTM Series Network PC Card 17. On the screen shown in Figure 6-15, enter your Computer Name, how your computer is identified on the network. Then, assign the computer to either a Workgroup or Domain, whichever is appropriate. The Computer Name must be differ-
than any ent other on the Workgroup or Domain. Click the Next but-
ton. Make sure that the Instant Wireless Network PC Card ver. 3.0 appears in the Adapter window (as shown in Figure 6-17). Then, unless you need to assign a static IP address, select Obtain an IP address from a DHCP server and click the OK button. If you need to assign a static IP address, select Specify an IP Address, and enter the appropriate values under IP Address, Gateway Mask, and Default Gateway. After you have made your choice, click the OK button. Windows NT has now completed installing the network. Remove the Setup Utility CD from the CD-ROM drive and click the Finish button to contin-
ue. Then, restart your computer. The Driver Installation is complete. Continue now to the section called Installing the Configuration Utility for Windows NT. Note: After you have installed the Network PC Card, reapply the Windows NT service pack. Figure 6-16 If You Have Installed Network Hardware Before:
18. Once the drivers have been installed, the following screen
(Figure 6-17) may appear. 1. Windows NT is not a Plug-and-Play Operating System and will not automatically identify the Network PC Card. To begin setup, insert the Setup Utility CD into your CD-ROM drive and then select Settings from the Start Menu. Bring up the Control Panel (as shown in Figure 6-18) and double-click the Network icon. 25 Figure 6-17 Figure 6-18 26 2. To add the Network PC Card, click the Adapters tab (as shown in Figure 6-19) and click the Add button to con-
tinue. Instant WirelessTM Series Network PC Card 5. The Select OEM Option screen will display all available adapters. Make sure that Instant Wireless - Network PC Card V3.0 is highlighted, as shown in Figure 6-22, and click the OK button to continue. appear 3. A list of adapters will as shown in Figure 6-
20. You will not want to select one of these, however, as the Setup Utility CD has all of the appropriate drivers. Click the Have Disk button to continue. 4. On the Insert Disk screen (Figure 6-21), type D:\WINNT in the field provided. Then, click the OK button to continue. 27 Figure 6-19 Figure 6-20 Figure 6-21 Figure 6-22 at 6. You will now reach the screen shown in Figure 6-13. This is called the Resources & Properties screen. It is recommended that you leave these options their default settings. If settings must be changed, it is pre-
ferred that you use the Configuration Utility that came with the Network PC Card. If you must adjust the settings on this screen, refer to Chapter 9: Advanced Properties for more information on the Advanced Properties for Windows NT. Click the OK button to continue. Figure 6-23 28 Instant WirelessTM Series Network PC Card 7. The Network PC Card has now been installed. You will see it added onto the screen shown in Figure 6-24. Click the Close button to continue and then restart your comput-
er. Figure 6-24 8. Once the drivers have been installed, the fol-
lowing screen (Figure 6-25) may appear. If the screen shown in Figure 4-25 appears, make sure that the Instant Wireless Network PC Card ver. 3.0 appears in the Adapter window. Then, unless you need to assign a static IP address, select Obtain an IP address from a DHCP server and click the OK button. If you need to assign a static IP address, select Specify an IP Address, and enter the appropriate values under IP Address, Gateway Mask, and Default Gateway. After you have made your choice, click the OK button. Windows NT has now completed installing the drivers. Remove the Setup Utility CD from the CD-ROM drive and click the Finish button to continue. Then, restart your computer. NOTE: After you have installed the Network PC Card, reapply the Windows NT service pack. The Driver Installation is complete. Continue now to the section called Installing the Configuration Utility for Windows NT. Installing the Configuration Utility for Windows NT Once you have restarted your computer, the drivers for the Card should load suc-
cessfully. Now it is necessary to install the Configuration Utility. Insert the Setup Utility CD in the CD-ROM drive. Unless you have deactivated the auto-run fea-
ture of Windows, the screen shown in Figure 6-26 should appear automatically. 29 30 Figure 6-25 Figure 6-26 Instant WirelessTM Series Network PC Card If this screen does not appear automatically, you can access the installation by clicking the Start button and choosing Run. In the drop-down box provided, type D:\setup.exe (where D: is the letter of your CD-ROM drive). Alternately, double-click My Computer, and then double-click the CD-ROM drive where the Setup Utility CD is located. Double-click the Setup.exe icon that appears. Follow the instructions that appear on your screen. If you have any questions or difficulty, refer to the section called Installing the Drivers and Configuration Utility for Windows 95, 98, ME, and 2000. Chapter 7: Configuration Utility The Configuration Utility is provided to allow you further customization of the Network PC Card and your wireless network. Using the Configuration Utility Once the Configuration Utility has been installed, an icon will be placed in the system tray (next to the clock) when the Network PC Card is inserted, as shown in Figure 7-1. Figure 7-1 You can also start the Configuration Utility by clicking the Start button, select-
ing Programs, and choosing the folder for the Network PC Card. Choose Configuration Utility. You will see the Wireless LAN Configuration Utility screen (shown in Figure 7-1). This utility is divided into six parts: Link Info, Configuration, Site Survey, Encryption, Advanced, and About. You should change all configuration settings for your Network PC Card using this utility and not under the Network Properties section in your Control Panel. LINK INFO The Link Info screen (shown in Figure 7-2) provides information about the cur-
rent link between the Network PC Card and a wireless Access Point. When in Infrastructure Mode, State will display the connection statistics for the network segment that you are on. The Current Channel field shows to what channel the Network PC Card is set. The Current Transfer Rate field shows the transfer rate in megabits per sec-
ond. The Current Service Set Identifier shows the current SSID set for the wire-
less network. This SSID can be modified at the Configuration screen. The Throughput fields show the rate at which data is transferred and received in Bytes per second. 31 32 Instant Wireless Series Network PC Card CONFIGURATION The Configuration screen, shown in Figure 7-3, allows you to customize the settings for the Network PC Card and your wireless network. The Wireless Mode setting determines the architecture of your wireless net-
work. Select Ad-Hoc or Infrastructure Mode depending on your network type. The Ad-Hoc mode is used for a simple peer-to-peer network and allows the sharing of local resources only between Network PC Cards without need-
ing a wireless Access Point. The Infrastructure mode allows a wireless net-
work to be integrated into an existed, wired network through an Access Point. Figure 7-2 Note: When in Ad-Hoc mode, Link Quality and Signal Strength indicators will not be available. The Link Quality field will display a bar indicating the percentage, between 0 and 100 percent, of the quality of the link. The higher the percentage, the bet-
ter the link. The Signal Strength field will display a bar indicating the percentage, between 0 and 100 percent, of the strength of the signal. The higher the percentage, the stronger the signal. Figure 7-3 Infrastructure networks permit roaming between Access Points while main-
taining a connection to all network resources. An acronym for Service Set Identifier, SSID is the unique name shared among all points in a wireless network. The SSID must be identical for all points in the network. It is case sensitive and must not exceed 32 characters. 33 34 Instant WirelessTM Series Network PC Card The Transfer Rate field shows the current transfer rate for the Network PC Card. To optimize performance and range, the TX Rate should be set to Fully Automatic, which will automatically adjust the transfer speed for best per-
formance and longest range. The Channel setting specifies the channel used in wireless communication and should be set to the same channel as the other points in the wireless network. This setting can only be adjusted in Ad-Hoc mode. Power Saving Mode, or PS Mode, enables or disables the power saving features of your Network PC Card. SITE SURVEY The Site Survey screen shows the available access points and their features. Click on the desired access point. Then click Connect to connect or Search to search for more access points. ENCRYPTION On the Encryption screen, shown in Figure 7-5, you can set the level of security with which you will be using the Network PC Card. Under the drop-down box, you can choose to have WEP encryption Disabled, 64-
Bit, or 128-Bit. Wired Equivalent Privacy (WEP) is an encryption scheme used to protect wireless data communication. The Disabled setting prevents the sharing of data with other computers on the WEP network. When selecting Manual Entry for the WEP Key Entry, enter the hexadecimal number set by other wireless WEP settings; these settings have to be identical to the WEP encryption on all points in your wireless network in order to network to your Network PC Card. 35 Figure 7-4 Figure 7-5 Note: In order to enable WEP encryption, hexadecimal values must be entered. Note: The WEP Key Entry must match the Key on all other devices on the wireless network, or else this device will be unable to trans-
mit or receive data. 36 Instant Wireless Series Network PC Card In order to enable 128-bit WEP encryption, choose 128 Bits in the drop-down box. In the drop-down box near the bottom right-hand corner of the page, choose which Default Tx Key will be used for the encryption. By default, Key 1 will be used. In the box corresponding to the default you chose, enter a hexa-
decimal number that the encryption algorithm will be based on. Click Apply Changes when you are done. ADVANCED The Advanced screen (Figure 7-6) allows you to set the Fragmentation Threshold, the RTS/CTS Threshold, and the Preamble Type. The Fragmentation Threshold Valueindicates how much of the network resources is devoted to recovering packet errors. The value should remain at its default setting of 2,432. If you experience high packet error rates, you can decrease this value but it will likely decrease overall network performance. Only minor mod-
ifications of this value are recommended. The RTS Threshold Valueshould remain at its default setting of 2,432. A pre-
amble is a signal used to synchronize the transmission timing between two or more systems. A series of transmission pulses is sent before the data to indicate that someone is about transmit data. This ensures that systems receiving the information correctly when the data transmission starts. Security is used for WEP only. By selecting Deny Unencrypted Data Frames, all unencrypted data will not be seen. For Authentication Type, you may choose between Open System or Shared Key. Shared Key is when both the sender and recipient share a secret key. Both units use this key for an extended length of time, sometimes indefinitely. Any eavesdropper that discovers the key may decipher all packets until the key is changed. Open System, the default setting, is when the sender and the recipient do not share a secret key. Each party generates its own key-pair and asks the receiver to accept the (usually randomly) generated key. Once accepted, this key is used for a short time only; then a new key is generated and agreed upon. The Preamble Type should be set to Short (if the network environment is noisy) or Long (if the environment is clear). Click OK to complete the configuration. ABOUT The About screen (Figure 7-7) shows the release information for the Driver Version, Configuration Utility Version, and Firmware Version 37 Figure 7-6 Figure 7-7 38 Instant Wireless Series Network PC Card Chapter 8: Installing Network Protocols Protocols are necessary for computers to communicate on your network. 3. Highlight Protocol from the list of network component types, as shown in Figure 8-3, and click the Add button. 1. From the Start Menu, select Settings and bring up the Control Panel, as in Figure 8-1. From the Control Panel, double-
click the Network icon. shown Figure 8-1 2. Select Instant Wireless Network PC Card V3.0 from the list (as shown in Figure 8-2) and click the Add button. Figure 8-3 Figure 8-4 4. From the the screen shown in Figure 8-
4, select Microsoft from list of Manufacturers and TCP/IP from the list of Network Protocols and click the OK button. four Repeat steps two through to install other proto-
cols, as NetBEUI or IPX/SPX. such 5. To verify that the drivers are working under Enhanced Mode on the Driver Type tab or reconfigure the card on the Advanced tab, go to the screen shown in Figure 8-2 and click the Properties but-
ton. This will bring up the Properties Tabs, where such values can be refined. When finished, you must restart your computer to complete installation. 39 Figure 8-2 Figure 8-5 40 Instant WirelessTM Series Network PC Card Chapter 9: Advanced Properties The Advanced Properties for Windows 95, 98, ME, and 2000 The Advanced Properties of the card are supplied for fine tuning the cards set-
tings. These values should only be changed by those completely familiar with both the operating system and the settings of the network. Unless your specif-
ic situation requires changing them, the default settings should be sufficient for your cards proper operation. Linksys advises that you change these values in the Configuration Utility rather than using this method, to insure that the set-
tings you change will be recognized everywhere. Check your wireless network settings before changing any of these values. 1. To access the Network Configuration screen (shown in Figure 9-1), click the Start button, choose Settings and open the Control Panel. Double-click the Network icon and choose the Advanced tab. 2. Select Authentication Algorithm from the list provided and select a Value from the drop-
the down menu on right, as shown in Figure 9-2. Figure 9-2 WECA Compliant (Default) (also referred to as Open Authentication) The sender and recipient do NOT share a secret key. Each party generates its own key-pair and asks the receiver to accept the generated key. Once accept-
ed, this key is used for a short time only. Must use Shared with WEP (Optional) This is when both the sender and recipient share a secret key. They use this key for an extended length of time. Any eavesdropper that discovers the key may decipher all packets until the key is changed. As indicated, you should always use WECA Compliant (Always Use) unless you have some other reason to do so. Choose Channel to continue or click the OK button to finish setting the Advanced Options Figure 9-1 41 42 Instant WirelessTM Series Network PC Card 3. The Channel setting, shown in Figure 9-3, must be the same for all wireless points in the network. Use the settings, 1-11, to find the best channel for your connection. For information, further see Chapter 7:
C o n f i g u r a t i o n Utility. Once your card is configured, click the OK button to finish the Advanced Options. setting 4. Select either Disabled, 64 bit, or 128 bit as the value under Encryption, shown in Figure 9-4. Wired Equivalent Privacy (WEP) is an encryption method used to protect wireless data communication. The Disabled setting pre-
vents the sharing of data with other computers on a WEP network. For data sharing to be enabled, select either 64 or 128 bit encryption, depending on your needs. For fur-
information, see ther Chapter 7:
Configuration Utility. Once your card is con-
figured, click OK to fin-
ish setting the Advanced Options. 43 Figure 9-3 Figure 9-4 5. The Fragmentation Value, Threshold shown in Figure 9-5 indi-
cates the maximum size of the transmit frame. Any data frame larger than this value will be fragmented into multiple frames. Lowering this value usually means a lower frame error rate, but a lower value also creates more overhead, which negatively affects network performance. The value can only be entered in increments of 128. Only minor modi-
fications of this value are recommended. Click Maximum Listen Interval to continue or the OK button to finish setting the Advanced Options. 6. The Maximum Listen Interval, as shown in Figure 9-6, only applies when operating in the Infrastructure mode while Power Saving is enabled. The value you input here will deter-
mine how often the com-
puter wakes up from the power saving mode to receive any packets that were sent while it was asleep. The higher the value entered here, the longer the time your computer sleeps between waking up to check for packets. Click Network Type to con-
tinue or the OK button to finish setting the Advanced Options. Figure 9-5 Figure 9-6 44 Instant WirelessTM Series Network PC Card 7. Select Network Type
(Figure 9-7) and select a Value, from the drop down menu, of either Infrastructure or Ad-
Hoc. The Infrastructure mode allows a Network PC Card to communicate with a wired network employing an access point, while the Ad-Hoc mode allows wireless-
to-wireless, peer-to-peer communication. Click Power Save Mode to continue or the OK but-
ton to finish setting the Advanced Options. 8. Select Power Save Mode (shown in Figure 9-8) and select either Enabled or Disabled for the Value. Disabled will allow for uninter-
rupted data communica-
tion. Selecting Enabled allows your notebook to enter sleep mode and interrupt data could For communication. information further about Save Mode, see Chapter 7:
Configuration Utility. Click Preamble Mode to continue or the OK button to finish setting the Advanced Options. Power Figure 9-7 9. A preamble is a signal used to synchronize the transmission tim-
ing between two or more points in your wireless network. The default setting is Long Tx Preamble
(as shown in Figure 9-
9). Long Tx Preamble allows extra time for the digital decoder to process initial header packets, but is transmitted at 11Mbps. Short Tx Preamble allows for less time to process the packets, but initial packets are transmit-
ted at 2Mbps. Click SSID to continue or the OK button to fin-
ish the Advanced Options. setting the 10. R T S T h r e s h o l d should remain Disabled the default setting, as shown in Figure 9-10. Do not change the setting of the RTS Threshold unless connection quality is poor. Then, increase this setting by a small value to estab-
lish a better connec-
tion. Click Network Type to continue or the OK button to fin-
ish the Advanced Options. setting Figure 9-9 45 Figure 9-8 Figure 9-10 46 11. The value for SSID
(Figure 9-11) depends on what Network Type was selected. Infrastructure net-
works should have the same SSID as the Access Point. All clients in an Ad-Hoc Network should share the same SSID. Click Transmit Rate to continue or the OK button to finish set-
ting the Advanced Options. 12. The Transmit Rate affects the speed of transmission to anoth-
er wireless device. The rate can either be set to a fixed value or left at the default value of Full Auto, as shown in Figure 9-12, which lets computer the determine the best transfer rate. The first option, Auto Select 1 or 2, is for compatibil-
ity with older wireless equipment. Click WEP Passphrase to continue or the OK button to finish setting the Advanced Options. 47 Instant WirelessTM Series Network PC Card 13. The WEP Passphrase (Figure 9-13) value allows the user to change the passphrase that is used to generate the encryption key for WEP. Any alphanumeric value can be entered here, but it will only be activated if you choose either 64 or 128 bit under Encryption. This value can also be changed using the Configuration Utility. For further information, see Chapter 7: Configuration Utility. Figure 9-11 Figure 9-12 Figure 9-13 Once your card is configured, click the OK button to finish setting the Advanced Options. 48 Instant Wireless Series Network PC Card The Advanced Properties for Windows NT The Advanced Properties screen allows you to make modifications to your Network PC Card, optimizing performance. These properties are accessed by right-clicking on the Network Neighborhood icon on the desktop. Select Properties from the menu that appears. From the tabbed window that appears next, click the Adapters tab. Highlight Instant Wireless Network PC Card V3.0 and then click the Properties button. The screen in Figure 9-14 should appear. Choosing improper settings in these fields can keep the Wireless Network PC Card from functioning properly. Follow these steps to configure the Advanced Properties fields:
other 2. The IRQ Base level
(Figure 9-15) can be changed in order to avoid possible conflicts with system devices. The default setting for the Network PC Card is 7. This value should only be changed if the Card does not work properly. 1. The I/O Base setting, shown in Figure 9-14, should be unique and not conflict with any other device settings in your system. Figure 9-15 3. The Mode setting (Figure 9-16) should be either Infrastructure or Ad-
Hoc, depending upon your networks settings. The Infrastructure mode allows a Network PC Card to communicate with a wired network employing an access point, while the Ad-Hoc mode allows w i r e l e s s -
to-wireless, peer-to-peer communication. For more information about these settings, refer to the section in Chapter 3 called Ad-Hoc versus Infrastructure Mode. Figure 9-14 Note:
In order to check for potential IRQ conflicts, run WINMSD by selecting RUN from the Start menu and typing winmsd.exe and pressing the Enter key. 49 Figure 9-16 50 4. The SSID (as shown in Figure 9-17) depends on what Mode is selected. If the Mode is Infrastructure, it should have the same SSID name as the Access Point. If the Mode is Ad-Hoc, all clients should share the same SSID name. 5. The DS Channel set-
ting (Figure 9-18) must be the same for all wireless points in the network. Use the set-
tings, 1-11, to find the best channel for your connection. Instant WirelessTM Series Network PC Card 6. RTS Threshold should remain in the default setting of Disabled, as shown in Figure 9-19. Do not change the set-
ting the RTS Threshold unless con-
nection quality is poor. Then, increase this set-
ting by a small value to establish a better con-
nection. of Figure 9-17 Figure 9-19 7. F r a g m e n t a t i o n Threshold should remain in the default setting of Disabled, as shown in Figure 9-
20. Do not change the setting the F r a g m e n t a t i o n Threshold unless con-
nection quality is poor. Then, increase this setting by a small value to establish a better connection. of 51 Figure 9-18 Figure 9-20 52 8. Under Power Saving mode (Figure 9-21), select either Enabled or Disabled. Disabled will allow for uninter-
rupted data communi-
cation. Selecting Enabled allows your enter notebook sleep mode and could interrupt data communication. For further information about Power Save Mode, see Chapter 7:
Configuration Utility. to value 9. Select either Disabled, 64 bit, or 128 bit as the under Encryption, as shown in Figure 9-22). Wired Equivalent Privacy
(WEP) is an encryp-
tion scheme used to protect wireless data communication. The Disabled setting pre-
vents the sharing of data with other com-
puters on a WEP net-
work. For data sharing to be enabled, select either 64 or 128 bit encryption. Instant WirelessTM Series Network PC Card 10. The Authentication setting, shown in Figure 9-23, is Open System by default. Open System is another name for WECA compliant. Figure 9-21 Figure 9-23 WECA Compliant (Default) (also referred to as Open Authentication) The sender and recipient do NOT share a secret key. Each party generates its own key-pair and asks the receiver to accept the generated key. Once accepted, this key is used for a short time only; thereafter a new key is gen-
erated and agreed upon. Shared Key (Optional) This is when both the sender and recipient share the same key. They use this key for an extended length of time. Any eavesdropper that discovers the key may decipher all packets until the key is changed. As indicated, you should always use WECA Compliant (Always Use) unless you have some other rea-
son to do so. Choose Listen Interval to continue or the OK button to finish setting the Advanced Options 53 54 Figure 9-22 11. The Listen Interval setting, as shown in Figure 9-24, should remain at 1 Beacon per Second. Setting this higher could result in slower data transfer. 12. The TX Rate setting, as shown in Figure 9-25, should remain Fully Auto as set by default. Changing this to a dif-
ferent transfer rate will lock in that rate and may result in dropped connections. Click the OK button to complete setting these options. Instant WirelessTM Series Network PC Card Chapter 10: Troubleshooting This chapter provides solutions to problems usually occurring during the instal-
lation and operation of the Network PC Card. Read the description below to solve your problems. If you cant find an answer here, check the Linksys web-
site at www.linksys.com. Common Problems and Solutions 1. My computer does not recognize the Network PC Card. Make sure that the Network PC Card is properly inserted into the PCMCIA slot. Note that the card can be inserted either way, but only correctly when it is inserted so that the Instant Wireless logo on the front of the card may not be seen. If in doubt, try inserting the card both ways. The card will slide in further when it is correct. 2. The Network PC Card does not work properly. Reinsert the Network PC Card into your notebooks PCMCIA slot. A beep should be heard if the card is properly inserted. For non-Windows environments, make sure that a PCMCIA card service driver is installed on your PC. Open the Control Panel and click on the PC Card. Check whether it has a PCMCIA card in one of the sockets or not. If you find the Network PC Card in one of the sockets, it means the card has been detected properly. If you see a yellow question mark, the resources are conflicting. Right-click on My Computer and select Properties. Select the device man-
ager and click the Network Adapter. You will find the Network PCCard if it is installed successfully. If you see the yellow exclamation mark, the resources are conflicting. Click PCMCIA card and then click PCMCIA card service. You will see the status of the Network PC Card. If there is a yellow question mark, please check the following:
Make sure your notebook has a free IRQ. Make sure you have inserted the right card and installed the proper driver. Figure 9-24 Figure 9-25 55 56 Instant WirelessTM Series Network PC Card If the Network PC Card does not function after attempting the above steps, remove the card and do the following:
Uninstall the driver software from your PC. Restart your PC and repeat the hardware and software installation as specified in this User Guide. 3. I cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration. Make sure that the notebook PC to which the Network PC Card is associat-
ed is powered on. Make sure that your Network PC Card is configured on the same channel and with the same security options as the other computers in the Infrastructure configuration. Frequently Asked Questions Can I run an application from a remote computer over the wireless net-
work?
This will depend on whether or not the application is designed to be used over a network. Consult the applications documentation to determine if it supports operation over a network. Can I play multiplayer games with other users of the wireless network?
Yes, as long as the game supports multiple players over a LAN (local area net-
work). Refer to the games documentation for more information. What is the IEEE 802.11b standard?
The IEEE 802.11b Wireless LAN standards subcommittee formulatings stan-
dards for the industry. The objective is to enable wireless LAN hardware from different manufacturers to communicate. What IEEE 802.11 features are supported?
The product supports the following IEEE 802.11 functions:
CSMA/CA plus Acknowledge protocol Multi-Channel Roaming Automatic Rate Selection RTS/CTS feature Fragmentation Power Management What is Ad-hoc?
An Ad-hoc wireless LAN is a group of computers, each with a Network PC Card, connected as an independent wireless LAN. An Ad-hoc wireless LAN is applicable at a departmental scale for a branch or SOHO operation. What is Infrastructure?
An integrated wireless and wired LAN is called an Infrastructure configura-
tion. Infrastructure is applicable to enterprise scale for wireless access to a cen-
tral database, or wireless application for mobile workers. What is Roaming?
Roaming is the ability of a portable computer user to communicate continu-
ously while moving freely throughout an area greater than that covered by a sin-
gle Wireless Network Access Point. To achieve true seamless connectivity, the wireless LAN must incorporate a number of different functions. Each node and Wireless Network Access Point, for example, must always acknowledge receipt of each message. Each node must maintain contact with the wireless network even when not actually trans-
mitting data. Achieving these functions simultaneously requires a dynamic RF networking technology that links Wireless Network Access Points and nodes. In such a system, the users end node undertakes a search for the best possible access to the system. First, it evaluates such factors as signal strength and qual-
ity, as well as the message load currently being carried by each Wireless Network Access Point and the distance of each Wireless Network Access Point to the wired backbone. Based on that information, the node next selects the right Wireless Network Access Point and registers its address. Communications between end node and host computer can then be transmitted up and down the backbone. As the user moves on, the end nodes RF transmitter regularly checks the sys-
tem to determine whether it is in touch with the original Wireless Network Access Point or whether it should seek a new one. When a node no longer receives acknowledgment from its original Wireless Network Access Point, it undertakes a new search. Upon finding a new Wireless Network Access Point, it then re-registers, and the communication process continues. What is BSS ID?
A specific Ad-hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID. What is ESSID?
An Infrastructure configuration could also support roaming capability for mobile workers. More than one BSS can be configured as an Extended Service Set (ESS). Users within an ESS could roam freely between BSSs while main-
taining a continuous connection to the wireless network stations and Wireless Network Access Points. 57 58 Instant WirelessTM Series Network PC Card Can Instant WirelessTM products support file and printer sharing?
Instant WirelessTM products perform the same function as LAN products. Therefore, Instant WirelessTM products can work with Netware, Windows NT/2000, or other LAN operating systems to support printer or file sharing. What is WEP?
WEP is Wired Equivalent Privacy, a data privacy mechanism based on a 40 bit shared key algorithm, as described in the IEEE 802.11 standard. What is ISM band?
The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available worldwide. This presents a truly revolutionary opportunity to place convenient high speed wireless capabilities in the hands of users around the globe. What is Spread Spectrum?
Spread Spectrum technology is a wideband radio frequency technique devel-
oped by the military for use in reliable, secure, mission-critical communica-
tions systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade-off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum
(DSSS) and Frequency Hopping Spread Spectrum (FHSS). What is DSSS? What is FHSS? And what are their differences?
Frequency Hopping Spread Spectrum (FHSS) uses a narrowband carrier that changes frequency in a pattern that is known to both transmitter and receiver. Properly synchronized, the net effect is to maintain a single logical channel. To an unintended receiver, FHSS appears to be short-duration impulse noise. Direct Sequence Spread Spectrum (DSSS) generates a redundant bit pattern for each bit to be transmitted. This bit pattern is called a chip (or chipping code). The longer the chip, the greater the probability that the original data can be recovered. Even if one or more bits in the chip are damaged during transmis-
sion, statistical techniques embedded in the radio can recover the original data without the need for retransmission. To an unintended receiver, DSSS appears as low power wideband noise and is rejected (ignored) by most narrowband receivers. Would the information be intercepted while transmitting on air?
WLAN features two-fold protection in security. On the hardware side, as with Direct Sequence Spread Spectrum technology, it has the inherent security fea-
ture of scrambling. On the software side, the WLAN series offers the encryp-
tion function (WEP) to enhance security and access control. Users can set it up depending upon their needs. 59 60 Instant WirelessTM Series Network PC Card Chapter 11: Glossary Ad-hoc Network - An ad-hoc network is a wireless network or other small net-
work in which some of the network devices are part of the network only for the duration of a communications session while in some close proximity to the rest of the network. Architecture - The total design and implementation of the network. It includes the network's topology, transmission technologies and communications proto-
cols, management and security systems, and any other attributes that give a net-
work a particular set of capabilities and functionalities. Backbone - The part of a network that connects most of the systems and net-
works together and handles the most data. Bandwidth - The transmission capacity of a given facility, in terms of how much data the facility can transmit in a fixed amount of time; expressed in bits per sec-
ond (bps). Bit - A binary digit. The value - 0 or 1-used in the binary numbering system. Also, the smallest form of data. BSS (Basic Service Set) - A group of Instant Wireless Network PC Card users and an Access Point. Buffer - A buffer is a shared or assigned memory area used by hardware devices or program processes that operate at different speeds or with different sets of pri-
orities. The buffer allows each device or process to operate without being held up by the other. In order for a buffer to be effective, the size of the buffer and the algorithms for moving data into and out of the buffer need to be considered by the buffer designer. Like a cache, a buffer is a "midpoint holding place" but exists not so much to accelerate the speed of an activity as to support the coordination of separate activities. CSMA/CD (Carrier Sense Multiple Access/Collision Detection) - The LAN access method used in Ethernet. When a device wants to gain access to the net-
work, it checks to see if the network is quiet (senses the carrier). If it is not, it waits a random amount of time before retrying. If the network is quiet and two devices access the line at exactly the same time, their signals collide. When the collision is detected, they both back off and each wait a random amount of time before retrying. Database - A database is a collection of data that is organized so that its contents can easily be accessed, managed, and updated. Default Gateway - The routing device used to forward all traffic that is not addressed to a station within the local subnet. DHCP (Dynamic Host Configuration Protocol) - A protocol that lets network administrators manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's network. Using the Internet's set of protocol (TCP/IP), each machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users with a connection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address must be entered manually at each computer and, if computers move to another location in another part of the network, a new IP address must be entered. DHCP lets a network administrator supervise and distribute IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network. DHCP uses the concept of a "lease" or amount of time that a given IP address will be valid for a computer. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. It's espe-
cially useful in education and other environments where users change frequently. Using very short leases, DHCP can dynamically reconfigure networks in which there are more computers than there are available IP addresses. DHCP supports static addresses for computers containing Web servers that need a permanent IP address. Domain - A subnetwork comprised of a group of clients and servers under the control of one security database. Dividing LANs into domains improves per-
formance and security. Driver - A workstation or server software module that provides an interface between a network interface card and the upper-layer protocol software running in the computer; it is designed for a specific NIC, and is installed during the ini-
tial installation of a network-compatible client or server operating system. 61 62 Instant Wireless Series Network PC Card DSSS (Direct-Sequence Spread-Spectrum) - DSSS generates a redundant bit pat-
tern for each bit to be transmitted. This bit pattern is called a chip (or chipping code). The longer the chip, the greater the probability that the original data can be recovered. Even if one or more bits in the chip are damaged during transmis-
sion, statistical techniques embedded in the radio can recover the original data without -the need for retransmission. To an unintended receiver, DSSS appears as low power wideband noise and is rejected (ignored) by most narrowband receivers. Encryption - A security method that applies a specific algorithm to data in order to alter the data's appearance and prevent other devices from reading the infor-
mation. ESS - More than one BSS in a network. Ethernet - IEEE standard network protocol that specifies how data is placed on and retrieved from a common transmission medium. Has a transfer rate of 10 Mbps. Forms the underlying transport vehicle used by several upper-level proto-
cols, including TCP/IP and XNS. FHSS (Frequency Hopping Spread Spectrum) - FHSS continuously changes the center frequency of a conventional carrier several times per second according to a pseudo-random set of channels, while chirp spread spectrum changes the car-
rier frequency. Because a fixed frequency is not used, illegal monitoring of spread spectrum signals is extremely difficult, if not downright impossible depending on the particular method. Firmware - Programming that is inserted into programmable read-only memory
(programmable read-only memory), thus becoming a permanent part of a com-
puting device. Fragmentation - Breaking a packet into smaller units when transmitting over a network medium that cannot support the original size of the packet. Gateway - A device that interconnects networks with different, incompatible communications protocols. Hardware - Hardware is the physical aspect of computers, telecommunications, and other information technology devices. The term arose as a way to distinguish the "box" and the electronic circuitry and components of a computer from the program you put in it to make it do things. The program came to be known as the software. Hop - The link between two network nodes. IEEE (The Institute of Electrical and Electronics Engineers) - The IEEE describes itself as "the world's largest technical professional society, promoting the development and application of electrotechnology and allied sciences for the benefit of humanity, the advancement of the profession, and the well-being of our members."
The IEEE fosters the development of standards that often become national and international standards. The organization publishes a number of journals, has many local chapters, and several large societies in special areas, such as the IEEE Computer Society. Infrastructure - An infrastructure network is a wireless network or other small network in which the wireless network devices are made a part of the network through the Access Point which connects them to the rest of the network. IP Address - In the most widely installed level of the Internet Protocol (Internet Protocol) today, an IP address is a 32-binary digit number that identifies each sender or receiver of information that is sent in packet across the Internet. When you request an HTML page or send e-mail, the Internet Protocol part of TCP/IP includes your IP address in the message (actually, in each of the packets if more than one is required) and sends it to the IP address that is obtained by looking up the domain name in the Uniform Resource Locator you requested or in the e-mail address you're sending a note to. At the other end, the recipient can see the IP address of the Web page requestor or the e-mail sender and can respond by send-
ing another message using the IP address it received. IPX (Internetwork Packet EXchange) - A NetWare communications protocol used to route messages from one node to another. IPX packets include network addresses and can be routed from one network to another. IRQ (Interrupt ReQuest) - A hardware interrupt on a PC. There are 16 IRQ lines used to signal the CPU that a peripheral event has started or terminated. In most cases, two devices cannot use the same line. ISM band - The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available worldwide. This presents a truly revolutionary opportunity to place convenient high-speed wireless capabilities in the hands of users around the globe. 63 64 Instant WirelessTM Series Network PC Card LAN - A local area network (LAN) is a group of computers and associated devices that share a common communications line and typically share the resources of a single processor or server within a small geographic area (for example, within an office building). Mbps (MegaBits Per Second) - One million bits per second; unit of measure-
ment for data transmission. NetBEUI (NetBIOS Extended User Interface) - The transport layer for NetBIOS. NetBIOS and NetBEUI were originally part of a single protocol suite that was later separated. NetBIOS sessions can be transported over NetBEUI, TCP/IP and SPX/IPX protocols. NetBIOS - The native networking protocol in DOS and Windows networks. Although originally combined with its transport layer protocol (NetBEUI), NetBIOS today provides a programming interface for applications at the session layer (layer 5). NetBIOS can ride over NetBEUI, its native transport, which is not routable, or over TCP/IP and IPX/SPX, which are routable protocols. NetBIOS computers are identified by a unique 15-character name, and Windows machines (NetBIOS machines) periodically broadcast their names over the net-
work so that Network Neighborhood can catalog them. For TCP/IP networks, NetBIOS names are turned into IP addresses via manual configuration in an LMHOSTS file or a WINS server. There are two NetBIOS modes. The Datagram mode is the fastest mode, but does not guarantee delivery. It uses a self-contained packet with send and receive name, usually limited to 512 bytes. If the recipient device is not listening for mes-
sages, the datagram is lost. The Session mode establishes a connection until bro-
ken. It guarantees delivery of messages up to 64KB long. Network - A system that transmits any combination of voice, video and/or data between users. Node - A network junction or connection point, typically a computer or work sta-
tion. Notebook (PC) - A notebook computer is a battery-powered personal computer generally smaller than a briefcase that can easily be transported and convenient-
ly used in temporary spaces such as on airplanes, in libraries, temporary offices, and at meetings. A notebook computer, sometimes called a laptop computer, typ-
ically weighs less than five pounds and is three inches or less in thickness. Packet - A unit of data routed between an origin and a destination in a network. Passphrase - Used much like a password, a passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for Linksys products. PC Card - A credit-card sized removable module that contains memory, I/O, or a hard disk. PCMCIA - The PCMCIA (Personal Computer Memory Card International Association) is an industry group organized in 1989 to promote standards for a credit card-size memory or I/O device that would fit into a personal computer, usually a notebook or laptop computer. Plug-and-Play - The ability of a computer system to configure expansion boards and other devices automatically without requiring the user to turn off the system during installation. Roaming - The ability to use a wireless device and be able to move from one access point's range to another without losing the connection. RTS (Request To Send) - An RS-232 signal sent from the transmitting station to the receiving station requesting permission to transmit. Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services. Software - Instructions for the computer. A series of instructions that performs a particular task is called a "program." The two major categories of software are
"system software" and "application software." System software is made up of control programs such as the operating system and database management system
(DBMS). Application software is any program that processes data for the user. A common misconception is that software is data. It is not. Software tells the hardware how to process the data. Spread Spectrum - Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for reli-
ability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the 65 66 Instant Wireless Series Network PC Card parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum
(DSSS) and Frequency Hopping Spread Spectrum (FHSS). Static IP Address - A permanent IP address that is assigned to a node in an IP or a TCP/IP network. TCP (Transmission Control Protocol) - A method (protocol) used along with the Internet Protocol (Internet Protocol) to send data in the form of message units between computers over the Internet. While IP takes care of handling the actual delivery of the data, TCP takes care of keeping track of the individual units of data (called packet) that a message is divided into for efficient routing through the Internet. TCP/IP (Transmission Control Protocol/Internet Protocol) - The basic commu-
nication language or protocol of the Internet. It can also be used as a communi-
cations protocol in a private network (either an intranet or an extranet). When you are set up with direct access to the Internet, your computer is provided with a copy of the TCP/IP program just as every other computer that you may send mes-
sages to or get information from also has a copy of TCP/IP. Throughput - The amount of data moved successfully from one place to anoth-
er in a given time period. Topology - A network's topology is a logical characterization of how the devices on the network are connected and the distances between them. The most common network devices include hubs, switches, routers, and gateways. Most large net-
works contain several levels of interconnection, the most important of which include edge connections, backbone connections, and wide-area connections. TX Rate - Transmission Rate. WEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64-bit or 128-bit shared key algorithm, as described in the IEEE 802.11 standard. Workgroup - Two or more individuals that share files and databases. Chapter 12: Specifications Standards:
Channels:
Operating Range:
Indoors:
Outdoors:
IEEE 802.11b 11 Channels (US, Canada) 13 Channels (Europe) 14 Channels (Japan) Up to 30M (100 ft.) @ 11 Mbps Up to 50M (165 ft.) @ 5.5 Mbps Up to 70M (230 ft.) @ 2 Mbps Up to 91M (300 ft.) @ 1 Mbps Up to 152M (500 ft.) @ 11 Mbps Up to 270M (885 ft.) @ 5.5 Mbps Up to 396M (1300 ft.) @ 2 Mbps Up to 457M (1500 ft.) @ 1 Mbps Data Rate (Mbps):
Up to 11Mbps (with automatic scale back) LEDs:
Link, Power Environmental Dimensions:
4.5" x 2" x 0.3" (115mm x 54mm x 8mm) Unit Weight:
1.65 oz. (47g) Power:
3.3V or 5V DC, 275mA Tx, 225mA Rx, 200mA Standby Certifications:
FCC Class B, CE Mark Commercial Operating Temp.:
32F to 131F (0C to 55C) Storage Temp.:
-4F to 158F (-20C to 70C) Operating Humidity:
0% to 90% Non-Condensing Storage Humidity:
0% to 95% Non-Condensing 67 68 Chapter 13: Warranty Information Chatper 14: Contact Information Instant Wireless Series Network PC Card BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCTS PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. IN NO EVENT SHALL LINKSYSS LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT. LINKSYS OFFERS CROSS SHIPMENTS, A FASTER PROCESS FOR PRO-
CESSING AND RECEIVING YOUR REPLACEMENT. LINKSYS PAYS FOR UPS GROUND ONLY. ALL CUSTOMERS LOCATED OUTSIDE OF THE UNITED STATES OF AMERICA AND CANADA SHALL BE HELD RESPONSIBLE FOR SHIPPING AND HANDLING CHARGES. PLEASE CALL LINKSYS FOR MORE DETAILS. For help with the installation or operation of this product, contact Linksys Technical Support at one of the phone numbers or Internet addresses below. Sales Information Technical Support RMA Issues Fax Email Web FTP Site 800-546-5797 (LINKSYS) 866-242-8558 949-261-1288 949-261-8868 support@linksys.com http://www.linksys.com ftp.linksys.com 69 70 http://www.linksys.com Copyright 2002 Linksys, All Rights Reserved.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2002-09-24 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2002-09-24
|
||||
1 | Applicant's complete, legal business name |
Cisco-Linksys, LLC
|
||||
1 | FCC Registration Number (FRN) |
0006267462
|
||||
1 | Physical Address |
17401 Armstrong Ave.
|
||||
1 |
Irvine, California 92614
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@americanTCB.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
PKW
|
||||
1 | Equipment Product Code |
WPC12
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** Y******
|
||||
1 | Title |
Associate Engineer
|
||||
1 | Telephone Number |
949-7********
|
||||
1 | Fax Number |
949-2********
|
||||
1 |
j******@linksys.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Advance Data Technology Corporation
|
||||
1 | Name |
V******** W****
|
||||
1 | Physical Address |
13-1, Lane 19, WenShan 3rd St
|
||||
1 |
Taoyuan, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
+886 ******** Extension:
|
||||
1 | Fax Number |
+886 ********
|
||||
1 |
v******@adt.com.tw
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WLAN Cardbus Card | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output is Conducted. SAR compliance is limited to the specific configuration tested for this filing. This transmitter must not be co-located with any other transmitters or antennas. The highest reported SAR values are: Body 0.981W/kg | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
R**** C******
|
||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0630000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC