FCC ID: LDK7925G0269 802.11 a/b/g Phone

F C S R E V I E W D R A F T - C I S C O C O N F I D E N T I A L Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 F C S R E V I E W D R A F T - C I S C O C O N F I D E N T I A L Common Phone Tasks Place a call Dial the number and press Answer a call

. Press

, Answer, or Disconnect Hold/resume a call Press Hold or Resume. Press or EndCall. Transfer a call to a new number Redial a number Forward your extension Choose Options >Trnsfer, enter a target number, then press Options >Trnsfer again. twice or Press Options > Redial. Choose Options > CFwdAll. Enter the number to which you want to forward all calls. To cancel, choose Options > CFwdAll. Use your call logs Choose Directory (Book) >

Missed Calls, Received Calls, or Placed Calls. To dial, scroll to a listing and press Dial or

. Move a shared line call between desk phone and wireless phone From the phone with the active call, press Hold. From the other phone, select the shared-line call and press Resume to retrieve the call. Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R) 2008 Cisco Systems, Inc. All rights reserved. OL-16132-01 QUICK REFERENCE Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 Using the Phone Shortcut Keys and Buttons Softkey Definitions Entering Text Phone Screen Icons Common Phone Tasks Using the Phone Power on/off the phone Access phone features Access Main menu options Access your Phone Book Adjust display brightness and hold until phone Press powers on or off. Press Options for feature list:

Press number key for feature or

Scroll to feature and press

. Press a navigation arrow for:

Directory menu (Book)

Line view (Phone)

Settings menu (Tools)

Services menu (World) Press number key for menu option. Press Ph Book or Directory >

Phone Book. Choose Settings > Phone Settings >

Display Settings, and select Display Brightness. Press or

, then press Save. Shortcut Keys and Buttons Toggle ringer to vibrate or ring Adjust ringer, handset, or speaker volume Mute/unmute your phone Activate speaker or handset Press and hold

. Press up or down. Press to toggle. To use the Press and hold handset, press and hold button again. Access voice messages Press and hold Lock the keypad Press and hold

. Unlock the keypad Press Unlock, then press OK. Softkey Definitions Entering Text Line Features AbbrDial Dial using a speed dial index CharacterPress key one or more times. Barge CallBack CFwdAll ConfList Confrn DirTrfr DND EditDial GPickUp HLog iDivert Join MCID MeetMe Message Park Ph Book PickUp QRT Remove RmLstC Trnsfer number Add yourself to a call on a shared line Receive notification when a busy extension becomes available Set up/cancel call forwarding View conference participants Create a conference call Transfer two calls to each other Turn on/off Do Not Disturb

(DND) Edit a number in a call log Answer a call that is ringing in another group or on another line Log in or out of your hunt group Send a call to your voice messaging system Join several calls already on a single line to create a conference Report suspicious calls Host a Meet-Me conference call Access your voicemail Store a call using Call Park Open your Phone Book Answer a call in your group Submit call problems to the system administrator Remove a conference participant Drop the last party added to a conference call Transfer a call SpacePress 0

. NumberPress the number key. SymbolPress these keys:

to enter * + - / = \ : ;

to enter space , . | _ ~

to enter # ? ( ) [ ] { }

to enter ! @ < > $ % ^ &

Phone Screen Icons Line and Call States Call on hold Shared line in use Call Forwarding enabled Incoming call, or BLF-monitored line is ringing (BLF Pickup only) BLF-monitored line is in-use BLF-monitored line is idle BLF-monitored line is in Do Not Disturb state Speed-dial, call log, or directory listing (BLF status unknown) Intercom line in idle state Intercom line in one-way audio Intercom line in two-way audio Phone line Service URL Voice message Other Features Mute on Headset active Bluetooth enabled Bluetooth device connected Speaker mode active Ringer off (silent mode) Ring and vibrate on Vibrate only on Application active Radio signal status No radio signal Battery charge status Keypad locked Business number for a contact Home number for a contact Mobile number for a contact Other number for a contact FCS REVIEW DRAFT - CISCO CONFIDENTIAL Contents Getting Started 1 Using this Guide 1 Finding Additional Information 2 Safety and Performance Information 2 Cisco Product Security Overview 6 Accessibility Features 6 Connecting Your Phone 7 Installing the Phone Battery 7 Charging the Phone Battery 10 Using the AC Power Supply to Charge the Battery 11 Using the USB Cable and USB Port on the PC to Charge the Battery 13 Powering On the Phone 14 Setting Username and Passwords 15 Entering and Editing Text 15 Accessories for the Cisco Unified Wireless IP Phone 7925G 16 Headset Information 16 Securing the Phone with a Lock Set and Cable Lock 18 An Overview of Your Phone 19 Understanding Buttons and Hardware 20 Understanding Phone Screen Features 23 Understanding the Home Screen Display 25 Understanding Feature Buttons and Menus 26 Accessing the Help System on Your Phone 27 Using Phone Buttons 28 Understanding Lines vs. Calls 28 Understanding Line and Call Icons 29 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 v FCS REVIEW DRAFT - CISCO CONFIDENTIAL Understanding Out-of-Range Alerts 30 Understanding Feature Availability 31 Bluetooth Wireless Headset Support 31 Handsfree Profile Support on the Phone 31 Cleaning the Phone 32 Basic Call Handling 33 Placing a CallBasic Options 33 Placing a CallAdditional Options 35 Answering a Call 37 Ending a Call 39 Using Hold and Resume 39 Using Mute 40 Switching Between Multiple Calls 41 Transferring Calls 41 Forwarding Calls to Another Number 43 Using Do Not Disturb 44 Making Conference Calls 45 Using Conference Features 45 Using Conference 46 Using Join 46 Using cBarge 48 Using Meet-Me 48 Viewing or Removing Conference Participants 49 Placing or Receiving Intercom Calls 50 Advanced Call Handling 52 Speed Dialing 52 Using Speed Dial and Fast Dial 53 Picking Up a Redirected Call on Your Phone 54 Storing and Retrieving Parked Calls 55 Logging Out of Hunt Groups 56 Using a Shared Line 57 vi OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Understanding Shared Lines 57 Using Barge to Add Yourself to a Shared-Line Call 57 Understanding Barge Features 58 Using Barge Features 58 Preventing Others from Viewing or Joining a Shared-Line Call 59 Using BLF to Determine a Line State 59 Making and Receiving Secure Calls 60 Tracing Suspicious Calls 62 Prioritizing Critical Calls 62 Using Cisco Extension Mobility 63 Using the Application Button 64 Using the Push to Talk Service 64 Using a Handset, Headset, and Speakerphone 65 Obtaining Headsets 66 Using Bluetooth Wireless Headsets 66 Using AutoAnswer 69 Changing Phone Settings 70 Customizing Rings 70 Customizing Volume Settings 71 Customizing the Phone Screen 72 Changing Keypad Settings 74 Using Any Key to Answer the Phone 74 Setting the Keypad to Automatically Lock 75 Changing the Keypad Tones 76 Viewing Your Network Profile List 76 Using Call Logs and Directories 77 Using Call Logs 77 Directory Dialing 78 Using Corporate Directory on Your Phone 79 Using Personal Directory on Your Phone 79 Cisco Unified CallManager Release 4.3 and Later 79 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 vii FCS REVIEW DRAFT - CISCO CONFIDENTIAL Cisco Unified Communications Manager Release 5.1 and Later 80 Using the Phone Book on Your Phone 82 Accessing Voice Messages 86 Accessing Your User Options Web Pages 87 Cisco Unified CallManager Release 4.3 and Later User Options Web Pages 87 Logging In to the User Options Web Pages 87 Subscribing to Phone Services 88 Cisco Unified Communications Manager Release 5.1 and Later User Options Web Pages 89 Accessing Your User Options Web Pages 89 Configuring Features and Services on the Web 90 Setting Up Speed Dials on the Web 90 Using Personal Directory on the Web 91 Setting Up Phone Services on the Web 94 Controlling User Settings on the Web 95 Controlling Line Settings on the Web 96 Using Cisco WebDialer 97 Understanding Additional Configuration Options 100 Troubleshooting Your Phone 102 General Troubleshooting 102 Viewing Phone Administration Data 103 Using the Quality Reporting Tool 104 Cisco One-Year Limited Hardware Warranty Terms 105 Index 107 viii OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Getting Started Using this Guide This guide provides you with an overview of the features available on your phone. You can read it completely for a solid understanding of your phone capabilities, or refer to the table below for pointers to commonly used sections. Then... See Safety and Performance Information, page 2. See Connecting Your Phone, page 7. Start with the An Overview of Your Phone, page 19. See Understanding Feature Buttons and Menus, page 26. See Understanding Phone Screen Features, page 23. See Placing a CallBasic Options, page 33. See Using Hold and Resume, page 39. See Using Mute, page 40. See Transferring Calls, page 41. See Making Conference Calls, page 45. See Forwarding Calls to Another Number, page 43. See Using a Shared Line, page 57. If you want to... Review safety information Connect your phone to the network Use your phone after it is installed Learn about the buttons and menus Learn about the phone screen Make calls Put calls on hold Mute calls Transfer calls Make conference calls Forward calls to another number Share a phone number Answer calls ringing on another phone See Picking Up a Redirected Call on Your Phone, page 54. See Using a Handset, Headset, and Speakerphone, page 65. Use your phone as a speakerphone See Speed Dialing, page 52. Set up speed dialing See Customizing Rings, page 70. Change the ring volume or tone See Using Call Logs and Directories, page 77. View your missed calls See Accessing Voice Messages, page 86. Listen to voice messages Customizing your phone using the See Accessing Your User Options Web Pages, page 87. User Options web pages See softkey and icon definitions Refer to the Quick Reference Card in the front of this guide. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 1 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Finding Additional Information You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html You can access the Cisco website at this URL:

http://www.cisco.com/

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml You can access the most current licensing information at this URL:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/openssl_license/7900_ssllic.html Safety and Performance Information Read the following safety notices before installing or using your wireless IP phone. Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Note To see translations of the warnings that appear in this publication, refer to the statement number in the Regulatory Compliance and Safety Information for the Cisco Unified Wireless IP Phone 7920 Series and Peripheral Devices document that accompanied this product. Warning Read the installation instructions before connecting the system to the power source. Statement 1004 2 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Getting Started Warning Voice over IP (VoIP) service and the emergency calling service do not function if power fails or is disrupted. After power is restored, you might have to reset or reconfigure equipment to regain access to VoIP and the emergency calling service. In the USA, this emergency number is 911. You need to be aware of the emergency number in your country. Statement 361 Warning The plug-socket combination on the battery charger must be accessible at all times because it serves as the main disconnecting device. Statement 1019 Warning The battery charger requires short-circuit (overcurrent) protection to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045 Warning Do not use the wireless IP phone in hazardous environments such as areas where high levels of explosive gas may be present. Check with the site safety engineer before using any type of wireless device in such an area. Warning Telephone receivers produce a magnetic field that can attract small magnetic objects such as pins and staples. To avoid the possibility of injury, do not place the handset where such objects may be picked up. Battery Safety Notices These battery safety notices apply to the batteries that are approved by the Cisco Unified Wireless IP Phone 7925G manufacturer. Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions. Statement 1015 Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 3 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Warning Do not dispose of the battery pack in fire or water. The battery may explode if placed in a fire. Caution The battery pack is intended for use only with this device. Caution Do not disassemble, crush, puncture, or incinerate the battery pack. Caution To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery contacts. Caution Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If the electrolyte has come in contact with the eye, flush the eye with water for 15 minutes and seek medical attention. Caution Do not charge the battery pack if the ambient temperature exceeds 104 degrees Fahrenheit (40 degrees Celsius). Caution Do not expose the battery pack to high storage temperatures (above 140 degrees Fahrenheit, 60 degrees Celsius). Caution When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. Caution To obtain a battery, contact your local dealer. Use only the batteries that have a Cisco part number. Standard batteryCP-BATT-7925G-STD Extended use batteryCP-BATT-7925G-EXT 4 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Getting Started Caution Use only the Cisco power supply that is compatible with your phone. To order your power supply, contact your local dealer and refer to the list of Cisco part numbers. AustraliaCP-PWR-7925G-AU=

Central EuropeCP-PWR-7925G-CE=

ChinaCP-PWR-7925G-CN=

JapanCP-PWR-7925G-JP=

North AmericaCP-PWR-7925G-NA=

United KingdomCP-PWR-7925G-UK=

Note The battery and power supply are not provided with your phone. To order the battery and power supply, contact your local dealer. Power Outage Your accessibility to emergency service through the phone is dependent on the wireless access point being powered. If there is an interruption in the power supply, Service and Emergency Calling Service dialing will not function until power is restored. In the case of a power failure or disruption, you may need to reset or reconfigure equipment before using the Service or Emergency Calling Service dialing. Regulatory Domains The radio frequency (RF) for this phone is configured for a specific regulatory domain. If you use this phone outside of its regulatory domain, the phone will not function properly, and you might violate local regulations. Healthcare Environments This product is not a medical device and uses an unlicensed frequency band that is susceptible to interference from other devices or equipment. Using External Devices The following information applies when you use external devices with the Cisco Unified Wireless IP Phone:

Cisco recommends the use of good quality external devices (such as headsets) that are shielded against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or more of the following actions:

Move the external device away from the source of the RF or AF signals.

Route the external device cables away from the source of the RF or AF signals.

Use shielded cables for the external device, or use cables with a better shield and connector. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 5 FCS REVIEW DRAFT - CISCO CONFIDENTIAL

Shorten the length of the external device cable.

Apply ferrites or other such devices on the cables for the external device. Cisco cannot guarantee the performance of the system because Cisco has no control over the quality of external devices, cables, and connectors. The system will perform adequately when suitable devices are attached using good quality cables and connectors. Caution In European Union countries, use only external headsets that are fully compliant with the EMC Directive [89/336/EC]. Cisco Product Security Overview This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. Further information regarding U.S. export regulations may be found at http://www.access.gpo.gov/bis/ear/ear_data.html. Accessibility Features A list of accessibility features is available upon request. 6 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Connecting Your Phone Connecting Your Phone Your system administrator will configure your new Cisco Unified Wireless IP Phone to connect to the corporate wireless network and the IP telephony network. A rechargeable Lithium ion battery powers the Cisco Unified Wireless IP Phone 7925G. Before you can use your phone, you must install the battery in the phone and then charge the battery. Depending on the type of battery you have, the fully charged battery provides these hours of service:

The standard battery provides up to 11 hours of talk time or up to 150 hours of standby time.

The extended battery provides up to 15 hours of talk time or up to 200 hours of standby time. Installing the Phone Battery This section describes how to install the phone battery. Use the following graphics to do the following:

1. Remove the phone cover 2. Install the battery 3. Replace the cover Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 7 FCS REVIEW DRAFT - CISCO CONFIDENTIAL To remove the phone cover, follow the steps in the graphic below:

1 2 CISCO 5 2 5 7 8 1 1 2 Push locking catch to the left to release the cover. Lift and remove the cover of the battery compartment. 8 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Connecting Your Phone To install the battery, follow the steps in the graphic below:

2 Battery 1 6 2 5 7 8 1 1 Align battery to the bottom of the battery compartment, making sure that the metal contacts on 2 the phone and battery face each other. Press the battery into the battery compartment until it locks into place. Make sure that it lines up with the phone. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 9 FCS REVIEW DRAFT - CISCO CONFIDENTIAL To replace the phone cover, follow the steps in the graphic below:

CISCO 2 1 7 2 5 7 8 1 1 Align locking catches at the bottom of the cover to the notches on the phone. 2 Press the cover firmly against the phone until it clicks in place. Charging the Phone Battery You can charge the battery in your wireless IP phone by connecting the AC power supply or the USB cable to your phone. For more information, see these sections:

Using the AC Power Supply to Charge the Battery, page 11

Using the USB Cable and USB Port on the PC to Charge the Battery, page 13 10 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Connecting Your Phone Battery Type Standard Extended Charging Time if AC Power Supply Connected to Phone 2 hours 3 hours Charging Time if Phone Connected to USB Port on PC with USB Cable 5 hours 7 hours Note You can also charge your battery by using a desktop charger or multi-charger. For more information, see the Cisco Unified Wireless IP Phone 7925G Accessory Guide. Using the AC Power Supply to Charge the Battery You can charge your battery quickly by connecting the AC power supply to the phone. To accommodate different AC power receptacles, you must insert the appropriate AC plug adapter on the AC power supply. You can use the phone while the battery is being charged. After the battery is charged, you can unplug the power supply cord, or you can leave the phone plugged into the power cord. Note Depending on configuration, your phone may automatically power off when it is connected to an AC power source. AC power sources include the power supply, desktop charger, or multi-charger. If the phone is in use (during a call or is using an XML phone service) when it is connected to the AC power source, it will power off upon termination of the call or phone service. For more information, ask your system administrator. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 11 FCS REVIEW DRAFT - CISCO CONFIDENTIAL To charge the battery in the phone using the AC power supply, follow the steps in this graphic:

6 1 2 5 4 3 8 2 5 7 8 1 Lift the mini-USB port cover (bottom of phone). Swing the port cover to one side. Insert the AC power supply mini-USB connector in the port. Insert the AC plug adapter in the slot on the power supply. Insert the AC power supply in a wall outlet. Indicator lightIndicates the charging status:

RedBattery charging in process

GreenBattery charging is complete 1 2 3 4 5 6 12 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Connecting Your Phone Using the USB Cable and USB Port on the PC to Charge the Battery You can charge the battery in the phone by connecting your phone with a USB cable to a USB port on your PC. Charging takes longer when you use the USB port on the PC to charge the battery. To use the USB cable and USB port to charge the battery, use this diagram and follow the steps:

3 2 9 3 6 7 8 1 Then... 1. 2. Note Insert the mini-USB connector on the USB cable into the phone. Insert the USB A-type connector into the USB port on your PC. If the Found New Hardware Wizard opens, use the next procedure to stop it. 1 If you want to... Charge the battery using the USB cable 3. Monitor the indicator light after the phone briefly displays USB Connected on the status line. While the battery is charging, the indicator light is red. When the battery is fully charged, the indicator light turns green. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 13 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Stop Found New Hardware Wizard from opening when connecting to USB port Then... 1. Click Next to use the wizard dialog box. 2. In the Update New Software dialog, click No, not this time, and click Next. 3. Click Install the Software automatically (Recommended) and click Next. 4. After a few moments, the Cannot Install This Hardware dialog displays. Click Don't prompt me again to install this software. 5. Click Finish to close the dialog box. Powering On the Phone After charging the battery, you must power on the phone to make and receive calls. If you want to... Then... Power on the phone 1. Press and hold the 2. You might need to enter a username and password to access the wireless

(red button) until the phone powers on. network. For more information, see Setting Username and Passwords, page 15. 3. After completing authentication and registration with Cisco Unified Communications Manager, the phone displays the main screen and is ready to place or receive calls. Check signal strength The icon indicates the strength of the signal between the wireless access point and your phone. Your phone must have at least one bar to place or receive calls. When you move the phone out of signal range, you lose connection with the wireless LAN. The service area. icon appears, and the status line displays, Leaving Tip Your idle phone screen can turn off after a time interval. To alert you that the phone is still powered on and connected to the wireless network when using battery power, the indicator light blinks green every two seconds. 14 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Connecting Your Phone Setting Username and Passwords When powering on your phone for the first time, in some networks, you might need to set your username and password to access the wireless network. Ask your system administrator for assistance.

) and press View. If you want to... Set username and password Then... 1. Choose 2. Highlight the current profile name (with Note

(Settings) > Network Profiles. icon displays indicating that this screen is locked. For assistance, contact your system administrator. 3. Highlight WLAN Configuration and press View. 4. Scroll to Username or Password and press

. 5. Using the keypad, enter your username or password in the New Username or New Password field. For assistance, see Entering and Editing Text, page 15. Note You can use up to 32 alphanumeric characters for the EAP/LEAP password. 6. To confirm the changes, choose Options > Save. 7. To return to the main screen, press

(red button). Entering and Editing Text You can enter characters, numbers, and special characters for passwords. When you press a numeric key on the keypad, a text bubble shows all the characters and symbols that this key controls. Each press moves to another character option. If you want to... Enter characters Then... Press the number key until you highlight the character (lower or upper case) that you want to enter. Enter numbers Press the number key and locate the number that you want to enter. Delete the last character Press << once to delete the last character or number or to delete the whole character string, press and hold <<. Enter a space Press to enter a space between characters. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 15 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Enter special characters and symbols Then... Press Press Press Press to display and enter these symbols * + - / = \ : ;

to display and enter these symbols space , . | _ ~

to display and enter these symbols # ? ( ) [ ] { }

to display and enter these symbols ! @ < > $ % ^ &

Cancel editing mode Choose Options > Cancel to return to the menu option or main screen. Registering with TAPS After your phone is connected to the wireless LAN network, your system administrator might ask you to auto-register your phone using TAPS (Tool for Auto-Registered Phones Support). TAPS might be used for a new phone or to replace an existing phone. To register with TAPS, enter the TAPS extension provided by your system administrator, and follow the voice prompts. You might need to enter your entire extension, including the area code. After your phone displays a confirmation message, disconnect. The phone will re-start. Accessories for the Cisco Unified Wireless IP Phone 7925G Accessories that are available for your phone include the following:

Standard and extended batteries

AC power supplies for different geographical areas

Desktop charger

Multi-charger

Carrying cases

Lock sets For a complete list and description of accessories, see the Cisco Unified Wireless IP Phone 7925G Accessory Guide. Headset Information To use a headset, see Using a Handset, Headset, and Speakerphone, page 65. Although Cisco Systems performs some internal testing of third-party wired and Bluetooth wireless headsets for use with the Cisco Unified Wireless IP Phone 7925G, Cisco does not certify or support products from headset or handset vendors. Because of the inherent environmental and hardware inconsistencies in the locations 16 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Connecting Your Phone where Cisco Unified IP Phones are deployed, there is not a single best solution that is optimal for all environments. Cisco recommends that customers test the headsets that work best in their environment before deploying a large number of units in their network. Cisco Systems recommends the use of good quality external devices, like headsets that are screened against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as cell phones and two-way radios, some audio noise may still occur. See Using External Devices, page 5 for more information. The primary reason that a particular headset would be inappropriate for the Cisco Unified IP Phone is the potential for an audible hum. This hum can be heard by either the remote party or by both the remote party and you, the Cisco Unified IP Phone user. Some potential humming or buzzing sounds can be caused by a range of outside sources, for example, electric lights, being near electric motors, large PC monitors. In some instances, the mechanics or electronics of various headsets can cause remote parties to hear an echo of their own voice when they speak to Cisco Unified IP Phone users. Using Bluetooth Wireless Headsets Using Bluetooth wireless headsets will likely increase battery power consumption on your phone and might result in reducing battery life. For a Bluetooth wireless headset to work, it does not need to be within direct line-of-sight of the phone, but some barriers, such as walls or doors, and interference from other electronic devices, could affect the connection. Audio Quality Subjective to the User Beyond the physical, mechanical and technical performance, the audio portion of a headset must sound good to you (the user) and to the party on the far end. Sound is subjective and Cisco cannot guarantee the performance of any headsets, but some of the headsets on the sites listed below have been reported to perform well on Cisco Unified IP Phones. Nevertheless, it is ultimately the customer's responsibility to test this equipment in their own environment to determine suitable performance. For information about wired and Bluetooth wireless headsets for your phone, see the Cisco Unified Wireless IP Phone 7925G Accessory Guide and these web sites:

http://www.plantronics.com

http://www.jabra.com

http://www.jawbone.com Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 17 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Securing the Phone with a Lock Set and Cable Lock You can secure the phone to a desk top by ordering the lock set from Cisco. For more information, refer to the Cisco Unified Wireless IP Phone 7925G Accessory Guide. To install the lock set, use the diagram and follow these steps:

If you want to... Install the lock set on the phone Then... 1. Put the security cable around a post or through a hole in the desktop. Insert the loops at the ends of the security cable through the C-ring. Insert the C-ring with cable loops through the slot on back of phone. 2. 3. Use the combination lock to secure the ends of the C-ring around cable loops and phone. The phone is secured to the desktop area. 1 2 3 Note The lock set does not include the cable lock. 5 8 6 7 8 1 18 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL An Overview of Your Phone An Overview of Your Phone Your Cisco Unified Wireless IP Phone 7925G is a full-feature telephone and a qualified Bluetooth wireless device (Qualified Device ID (QDID) B014396). The phone provides voice communication over the same wireless LAN that your computer uses, allowing you to place and receive phone calls, put calls on hold, transfer calls, make conference calls, and so on. In addition to basic call-handling features, your phone can provide enhanced productivity features that extend your call-handling capabilities. Depending on the configuration, your phone supports:

Use of Bluetooth wireless headsets, including certain handsfree call features.

Wireless access to your phone number and the corporate directory.

A local phone book that can store up to 100 contacts, and speed-dial hot keys that can be assigned to phone book contacts.

Access to network data, XML applications, and web-based services.

Online customizing of phone features and services from your User Options web pages.

An online help system that displays information on the phone screen. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 19 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Understanding Buttons and Hardware You can use the graphic below to identify buttons and hardware on your phone. 1 17 16 15 14 13 12 11 10 2 3 4 6 5 7 8 9 0 0 5 7 8 1 1 Indicator light

(LED) Provides these indications:

Solid redPhone is connected to AC power source, and battery is charging.

Solid greenPhone is connected to AC power source, and battery is fully charged.

Fast blinking redIncoming call. (Phone can be charging or fully charged.)

Slow blinking redVoice message. (When phone is connected to AC power source, red light displays longer than when using only the battery.)

Slow blinking green (every two seconds)Phone is using only battery power. Phone is registered with the wireless network and is within service coverage area. 20 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL An Overview of Your Phone 2 Headset port with cover Port for plugging in a headset or ear bud has a protective cover. 3 Speaker button Toggles the speaker mode on or off for the phone. 4 Right softkey button Activates the Options menu for access to the list of softkeys. Sometimes displays a softkey label. 5 Navigation button Accesses these menus and lists from the main screen. Directory Line View Settings Services 6 7 8 Select button Allows you to scroll up and down menus to highlight options and to move left and right through phone numbers and text entries. Activates the Help menu from the main screen. Allows you to select a menu item, a softkey, a call, or an action. Power/End button (red) Turns the phone on or off, ends a connected call, or silences the ring during an incoming call. When using menus, acts as a shortcut to return to the main screen. Pound (#) key Allows you to lock the key pad. Allows you to enter these special characters when you are entering text:

Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 21 FCS REVIEW DRAFT - CISCO CONFIDENTIAL 9 Zero (0) key 10 Asterisk (*) key 11 Keypad 12 One (1) key 13 Answer/Send button (green) Enters 0 when dialing a number. Allows you to enter a space or these special characters when you are entering text:

Toggles between Ring and Vibrate mode. Allows you to enter these special characters when you are entering text:

Allows you to dial numbers, enter letters, and choose menu items by number. Enters 1 when dialing a number. Allows you to access the voice messaging system. Allows you to enter these special characters when you are entering text:

Allows you to answer a ringing call or, after dialing a number, to place the call. 14 Left softkey button Activates the softkey option displayed on the screen. When set up by you, allows you to directly access your messages or open the Phone Book when the phone is idle. 15 Mute button Toggles the mute feature on or off. 16 Volume button When the phone is idle, allows you to control the ring volume, turn on the vibrate option, or turn off the ring. When an incoming call is ringing, allows you to press this button once to silence the ring for the call. During a call, allows you to control the speaker volume for the handset, headset, and speaker mode. Used with XML applications, such as Push to Talk or other services. For more information, see Using the Push to Talk Service, page 64. 17 Application button 22 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL An Overview of Your Phone Understanding Phone Screen Features Because the Cisco Unified Wireless IP Phone 7925G has only two softkey buttons, the Options softkey displays the list of available feature options for the phone. The features in the Options list change depending on whether the phone is idle or in an active call. This is what your main phone screen looks like with the Options list open. 1 2 3 5 6 8 7 8 1 6 5 4 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 23 FCS REVIEW DRAFT - CISCO CONFIDENTIAL 1 Phone Status line Displays these icons (if active) and your directory number:

Battery iconShows the level of charge in battery Battery removal iconShows the battery is removed or is not recognized Signal iconShows the degree of signal strength Key Lock iconIndicates the keypad is locked Speaker iconIndicates speaker mode is active Mute iconIndicates mute is active Headset iconIndicates headset is active Ringer Off iconIndicates the phone alert is silent Vibrate iconIndicates the phone alert is vibrate only Vibrate and Ring iconIndicates the phone alert is vibrate and ring Voice Message iconIndicates you have a voice message Application iconIndicates the application (such as Push to Talk) is active Bluetooth iconIndicates the Bluetooth setting is enabled Bluetooth iconIndicates a Bluetooth device is connected Primary Phone lineDisplays the phone number (directory number) for your primary phone line Displays time and date information OL-16132-01 10140 2 Date and Time line 12:39 06/20/06 24 FCS REVIEW DRAFT - CISCO CONFIDENTIAL An Overview of Your Phone 3 Options Menu 4 Softkey labels area Ph Book - Options Displays softkey features for the current call state Displays softkey options and provides access to the Options list of softkey features Displays the active navigation arrows for the menu or screen 5 Status and information Your current options Provides phone status or instructions 6 Main phone screen Displays four menu icons and Help Understanding the Home Screen Display The home screen is the display on your phone screen when it is idle. A home screen can be the main phone screen or Line View. Your system administrator determines how the home screen is displayed on your phone. Home Screen with Main Phone Screen Displayed This is a home screen with the main phone screen displayed. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 25 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Home Screen in Line View This is a home screen in Line View. To access the main phone screen, press

. Understanding Feature Buttons and Menus From the main phone screen, you can use the Navigation button to access feature menus. If you want to... Then... Open a feature menu Press an arrow on the Navigation button to access one of these menus from the main phone screen:

Directory Line View Settings Services Scroll through a menu or list Press the Navigation button up or down. 26 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL An Overview of Your Phone If you want to... Then... Select a menu option Go back one level in a feature menu Reposition the cursor to edit a phone number or name Do one of these actions:

Press the keypad number key for the item.

Scroll to highlight the item, and then press the the navigation button). button (center of Press Back. Note To close the menu and return to the main phone screen, press from any menu level. Press the Navigation button left or right. Select a highlighted call or option Press

. Access Help From the main screen, press

. Accessing the Help System on Your Phone Your phone provides an online help system. Help topics appear on the screen. If you want to... View the main menu Then... Press and wait a few seconds for the menu to display. Main menu topics include:

About Your Cisco Unified IP PhoneDetails about your phone

How do I...?Procedures for common phone tasks

Calling FeaturesDescriptions and procedures for calling features

HelpTips on using and accessing Help Press choose Help.

, wait for the online help main menu to display, and then Get help using Help Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 27 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using Phone Buttons The phone keypad and buttons provide these shortcuts to frequently used functions. If you want to... Lock the phone keypad Unlock the phone keypad Toggle between ring and vibrate mode Listen to voice messages Adjust the volume during a call Change the ring pattern for your calls Then... Press and hold the displays on the status line and the top of the Main screen. Note key until Keypad Locked icon displays at the The keypad lock is temporarily disabled when you have an incoming call. Press Unlock. As soon as the screen displays Unlock Keypad?, press OK, and the Note icon disappears . You must press the Unlock and OK softkeys as soon as they appear, or the keypad remains locked. until the screen displays icon displays at the top. Press and hold Vibrate On! and the To switch back to the ring mode, press and hold the screen displays Vibrate Off! and the disappears. Note Press and hold the voice messaging system. Press for a call on the handset, speaker, or headset. You can also use the Volume button to set vibrate. until the phone connects to your until icon For more information, see... Setting the Keypad to Automatically Lock, page 75 Customizing Rings, page 70 Accessing Voice Messages, page 86 Using Phone Buttons, page 28 When the phone is idle, press vibrate, or silent mode. to set the ring volume, Customizing Rings, page 70 Understanding Lines vs. Calls To avoid confusion about lines and calls, refer to these descriptions:

LinesEach corresponds to a directory number or intercom number that others can use to call to open Line in the Line you. Your phone supports up to six lines. To see your phone lines, press View. You have as many lines as you have directory numbers with phone line icons View list. 28 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL An Overview of Your Phone

CallsEach line can support multiple calls, typically up to four calls. Your phone can support up to 24 connected calls, but your system administrator might adjust this number according to your needs. Only one call can be active at any time; other calls are automatically placed on hold. Understanding Line and Call Icons This is what your main phone screen looks like with two active calls, one on hold (23827) and another connected (3956933). 1 2 3 4 1 Phone Status line 2 Call Activity area 3 4 Status line Softkey labels Icons and your directory number Calling party information, connection duration, and call state icon Status of the selected line Call feature and Options list Your phone displays these icons to help you determine the line and call state. Icon Line or call state On-hook line Description No call activity on this line. Off-hook line Line in use, but not connected to a call. Connected call You are connected to the other party. Incoming call, or BLF-monitored line is ringing (BLF Pickup) See Using BLF to Determine a Line State, page 59. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 29 Icon FCS REVIEW DRAFT - CISCO CONFIDENTIAL Line or call state BLF-monitored line is idle BLF-monitored line is in-use BLF-monitored line is in Do Not Disturb state BLF indicator is unavailable for this line Remote line in use Call on hold Call forward enabled Authenticated call Description See Using BLF to Determine a Line State, page 59. See Using BLF to Determine a Line State, page 59. See Using BLF to Determine a Line State, page 59. See Using BLF to Determine a Line State, page 59. A shared line is in use remotely. See Using a Shared Line, page 57. You have put this call on hold. See Using Hold and Resume, page 39. You have forwarded your primary line. See Forwarding Calls to Another Number, page 43. See Tracing Suspicious Calls, page 62. Encrypted call See Tracing Suspicious Calls, page 62. Idle Intercom line The intercom line is not in use. See Placing or Receiving Intercom Calls, page 50. One-way Intercom call The intercom line is sending or receiving one-way audio. See Placing or Receiving Intercom Calls, page 50. Two-way Intercom call The recipient pressed the intercom line to activate two-way audio with the caller. See Placing or Receiving Intercom Calls, page 50. Understanding Out-of-Range Alerts Your system administrator can configure your phone to send you an audible alert (beep) when you are out of range of the wireless network. When you hear the alert, this icon displayed on the phone screen. When you are out of range of the wireless network, you will not be able to use the phone for features requiring a wireless network connection, such as making and receiving calls. If your system administrator enabled the out-of-range alert, depending on the configuration, you might hear a beep only once, or every 10, 30, or 60 seconds until you are back within range of the wireless network.

(no signal) will be 30 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL An Overview of Your Phone To reconnect to the wireless network after you hear the alert, move to another location until you see the signal icon on the phone screen again. Understanding Feature Availability The operation of your Cisco Unified Wireless IP Phone 7925G and the features available to you may vary, depending on the call processing agent used by your company and also on how your companys phone support team has configured your phone system. Therefore, some of the features included in this guide might not be available to you or might work differently on your phone system. Contact your support desk or system administrator for information about feature operation or availability. Bluetooth Wireless Headset Support The Cisco Unified Wireless IP Phone 7925G supports the use of Bluetooth wireless headsets. For information about using headsets, see Headset Information, page 16 and Using a Handset, Headset, and Speakerphone, page 65. Handsfree Profile Support on the Phone Your phone supports certain features of the Handsfree Profile, which is a standard set of features that enable users of handsfree devices (such as Bluetooth wireless headsets) to perform certain tasks without having to handle the phone, allowing users to be handsfree. For example, instead of pressing Redial on your phone, you can redial a number from your Bluetooth wireless headset according to instructions from the headset manufacturer. These handsfree features apply to Bluetooth wireless headsets used with your Cisco Unified Wireless IP Phone 7925G:

RedialRecalls the last number dialed.

Reject incoming callUses the iDivert option to direct the call to voicemail.

Three-way callingWhen there is an active call and another incoming call or call on hold, you may choose to handle the calls in one of two ways:

End the active call and answer or resume a waiting call. Put the active call on hold and answer or resume a waiting call. For more information, see the following sections:

Placing a CallBasic Options, page 33

Answering a Call, page 37

Using Hold and Resume, page 39

Switching Between Multiple Calls, page 41 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 31 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Note Handsfree devices may differ in how features are activated. Handsfree device manufacturers may also use different terms when referring to the same feature. For more information on using handsfree features, see the documentation provided by the device manufacturer. Cleaning the Phone Gently wipe the phone screen and phone with a soft, dry cloth or a moist wipe. Note The Cisco Unified Wireless IP Phone 7925G is resistant to dust and spills, but if you wish to further protect your phone, you can purchase a silicon case for it. For more information, see the Cisco Unified Wireless IP Phone 7925G Accessory Guide. 32 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling Basic Call Handling You can perform basic call-handling tasks using a range of features and services. Feature availability can vary; see your system administrator for more information. Placing a CallBasic Options Here are some easy ways to place a call on your wireless IP phone. Note Your system administrator can configure your phone to alert you (by beeping) when it is out of range of the wireless network. You can only use your phone if it is within range of the wireless network. For more information, see your system administrator. If you want to... Place a call using the handset Place a call using the speaker mode on the handset Then... 1. Dial the phone number. 2. Press Note No dial tone occurs. 1. Press and hold to place your call. button to activate the speaker. 2. Dial the phone number. 3. Press Note Press and hold off speaker mode. to place your call. button again to turn For more information, see... Answering a Call, page 37 Using a Handset, Headset, and Speakerphone, page 65 Redial a number using the handset Redial a number using your Bluetooth wireless headset Place a call while another call is active (using the same line) Press twice or choose Options > Redial. See the documentation from your headset manufacturer. 1. Choose Hold. 2. Choose Options > NewCall. 3. Dial, redial, or speed dial a number. Note You hear dial tone with NewCall. Using Hold and Resume, page 39 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 33 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Dial a number from the Phone Book Dial from a call log Dial an international number Then... 1. Choose

Phone Book or Ph Book (if available). 2. Highlight a contact name, then do one of the following:

Scroll left or right until you see the icon for the phone number:

phone, home phone, other phone. or work mobile phone, Choose Options > Details, highlight a phone number. or Options > Dial. 3. Press 1. Press 2. Choose Missed Calls, or Received Calls, or

. Placed Calls. 3. Press the number key for the listing or scroll to a listing and press

. 4. Press and hold 0 Enter the phone number, including the country code, after the + symbol. 5. Press or Options > Dial. For more information, see... Using the Phone Book on Your Phone, page 82 Using Call Logs, page 77 Tips

When you start to dial a number, your phone tries to anticipate the number you are dialing by displaying matching numbers from your Placed Calls log. This is called Auto Dial. To call a number displayed with Auto Dial, scroll to the number and press If you make a mistake while dialing, press << to erase digits.

To redial the last number, press

Your phone might be set up for international call logging, which is indicated by a + symbol on the call logs, redial, or call directory entries. See your system administrator for more information. two times. 34 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling

If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system administrator for more information. If you hear a beep tone from your phone, you might be out of range of the wireless network. Move to a location where you can see a strong signal icon on the phone if you wish to use your phone. Placing a CallAdditional Options You can place calls using special features and services that might be available on your phone. See your system administrator for more information about these additional options. If you want to... Then... Speed dial a contact number in your local phone book Do one of the following:

Press and hold a speed-dial hot key for about two seconds. Note If dialing a two-digit number, enter the first digit, then press and hold the second digit for about two seconds. For more information, see... Using the Phone Book on Your Phone, page 82 Speed Dialing, page 52

Choose

(Directory)> Speed Dials, highlight a speed dial, and press

. Speed dial a phone number

(for a Line View speed-dial number set up on the web) Place a call while another call is active (using a different line) Place the call on a secondary line

. 1. Press 2. Scroll to a speed dial 3. Press or to make the call. Speed Dialing, page 52

. 1. Press Hold. 2. Press 3. Scroll to another line and press 4. Dial a number. 5. Press to make the call. Using Hold and Resume, page 39

. 1. Press 2. Dial a number. 3. Press to make the call. and scroll to another line. Switching Between Multiple Calls, page 41 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 35 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Then... For more information, see... Dial from a corporate directory on your phone 1. Choose

> Directory Services >

Corporate Directory (name can vary). Directory Dialing, page 78 2. Use your keypad to enter a name. 3. Press Options > Submit. 4. Press the number key for the listing or scroll to a listing. 5. Press Dial or

. 1. Choose Options > CallBack while listening to the busy tone or ring sound. 2. Disconnect. Your phone alerts you when Your system administrator the line is free. 3. Press Dial to place the call when the line is available. Look for Busy Line Feature indicators. 1. Enter the MLPP access number. 2. Press 3. Dial the phone number. 4. Press

. Using BLF to Determine a Line State, page 59. Prioritizing Critical Calls, page 62 Use CallBack to receive notification when a busy or ringing extension is available See if a line associated with a speed-dial, call record, or directory listing is busy before placing a call to that line Make a priority

(precedence) call Dial from a Personal Address Book (PAB) entry 1. Choose

> Personal Directory to log in. Directory Dialing, page 78 Place a call using a billing or tracking code 2. Choose Personal Address Book and search for a listing. 3. Press Options > Submit. 4. Scroll to a listing and press

. 1. Dial a number. 2. Press 3. After the tone, enter a client matter code

(CMC) or a forced authorization code

(FAC). Your system administrator 36 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling For more information, see... Using Cisco Extension Mobility, page 63 Using the Push to Talk Service, page 64 If you want to... Then... Place a call using your Extension Mobility profile 1. Choose

> EM Service (name can vary). 2. Enter log in information. Place a Push to Talk call 1. Choose

> Push to Talk Service

(name can vary). 2. Use 3. Press or Talk to transmit. or Stop to end. Place a call using Fast Dial Note Before using this option, your system administrator must configure this feature. Contact your system administrator for more information. 1. Choose

> Fast Dial Service

(name can vary). 2. Scroll to or press the index number to find the entry. 3. Press Answering a Call You can answer a call by using several options, if they are available on your phone. If you want to... Answer a call Then... Press

. Silence the ring for an incoming call Press or

. For more information, see... Using Any Key to Answer the Phone, page 74 The call continues silently, then forwards to the no answer target. Switch from a connected call to answer a ringing call

(using the handset)

. or Press Doing so answers the new call and automatically puts the first call on hold. Switching Between Multiple Calls, page 41 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 37 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Then... Switch from a connected call to answer a ringing call

(using the Bluetooth wireless headset) See the instructions from your Bluetooth wireless headset documentation. Answer using call waiting Press Answer. Send call directly to your voice messaging system

(using the handset) Send call directly to your voice messaging system

(using the Bluetooth wireless headset) Press iDivert. This feature is commonly referred to as Call Reject by Bluetooth wireless device manufacturers. For more information, see your headset documentation. Note If iDivert is not configured for your phone by the system administrator, the phone ignores the call reject request. For more information, see... Switching Between Multiple Calls, page 41 Accessing Voice Messages, page 86 Accessing Voice Messages, page 86 Retrieve a parked call on another phone Use Call Park. Use your phone to answer a call ringing elsewhere Use Call Pickup. Tracing Suspicious Calls, page 62 Picking Up a Redirected Call on Your Phone, page 54 Answer a priority call using the handset Disconnect the current call and press Answer or

. Prioritizing Critical Calls, page 62 Answer a priority call using the Bluetooth wireless headset Disconnects the current call and answer a ringing call. See the instructions from your Bluetooth wireless headset documentation. Automatically connect to an incoming call after a ring or two Ask your system administrator to set up the Auto Answer feature. After ringing once or twice, the call automatically connects to the handset or headset without pressing

. Prioritizing Critical Calls, page 62 Using AutoAnswer, page 69 38 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling Tips

To use any button to answer a call, see Changing Keypad Settings, page 74.

You can answer an incoming call even when the keypad is locked.

If you were using an application or service before you answered an incoming call, your application or service will resume after you end the call. Ending a Call To end a call, simply disconnect. Here are some more details. If you want to... End the call Then... Choose

, EndCall, or Options > EndCall. Disconnect one call but preserve another call on the same line Choose EndCall or Options > EndCall. If necessary, remove the call from hold first. Using Hold and Resume You can hold and resume calls. When you put a call on hold, the Hold icon caller ID in the call view. If the Hold Reversion feature is enabled for your phone, calls that you leave on hold will revert back to ringing on your phone after a certain length of time. These reverting calls remain on hold until you resume them. Your phone indicates the presence of a reverting call by:

Alerting you at intervals with a single ring (or flash or beep, depending on your phone line setting).

Briefly displaying a Hold Reversion message in the status bar at the bottom of the phone screen. appears next to the If you want to... Put a call on hold Then... 1. Make sure the call you want to put on hold is highlighted. 2. Press Hold. Note Engaging the Hold feature typically generates music or a beeping tone. Remove a call from hold on the current line

(using the handset) 1. Make sure the appropriate call is highlighted. 2. Press Resume. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 39 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Remove a call from hold on the current line

(using the Bluetooth wireless headset) Remove a call from hold on a different line Move a call on a shared line to your wireless phone or to your desk phone Then... See the instructions from your Bluetooth wireless headset documentation. Note If there is an active call and a held call on the line, you can end the active call or place it on hold when you resume the held call. to change to another line. 1. Press 2. Press Resume. Note If a single call is holding on this line, the call automatically resumes. If another call is holding, scroll to the appropriate call and press Resume. 1. From the phone with the active call on the shared line, press Hold. 2. From your other phone with the shared line, press Resume. Tips

Engaging the Hold feature typically generates music or a beeping tone.

If you receive an alert for an incoming call and a reverting call at the same time, by default your phone will shift the focus of the phone screen to display the incoming call. Your system administrator can change this focus priority setting. If you use a shared line, Hold Reversion rings only on the phone that put the call on hold, not on the other phones that share the line.

The duration between Hold Reversion alerts is determined by your system administrator. Using Mute With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use Mute with the phone or a headset. If you want to... Toggle Mute on Toggle Mute off Then... During a call, press at the top of the phone screen. Press

. The icon disappears. on left side of phone. The icon displays 40 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling Switching Between Multiple Calls You can switch between multiple calls on one or more lines. If the call that you want to switch to is not automatically highlighted on the phone screen, scroll to it. If you want to... Switch between connected calls on one line Switch between connected calls on different lines Switch from a connected call to answer a ringing call

(using the handset) Switch from a connected call to answer a ringing call

(using the Bluetooth wireless headset) Then... 1. Make sure the call that you want to switch to is highlighted. 2. Press Resume. Any active call is placed on hold and the selected call is resumed. 1. Press 2. to change to another line. If a single call is holding on the line, the call automatically resumes. If another call is holding, scroll to highlight the appropriate call and press Resume. Press switch to the other line and press

, or if the call is ringing on a different line, press

. to Any active call is placed on hold. You can place the first call on hold or end the call when you answer the ringing call. For more information, see the documentation from your Bluetooth wireless headset manufacturer. Tips

The phone can have up to six lines, but the phone screen displays only one line. To see other lines, you must press

(Line View).

The phone can have multiple calls per line, but no more than 24 calls per phone. Transferring Calls Transfer redirects a connected call. The target is the number to which you want to transfer the call. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 41 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Transfer a call without talking to the transfer recipient Talk to the transfer recipient before transferring a call (consult transfer) Transfer two current calls to each other

(direct transfer) without staying on the line Redirect a call to your voice messaging system Then... 1. From an active call, choose Options >Trnsfer. 2. Dial the target number. 3. ChooseOptions > Trnsfer again to complete the transfer or EndCall to cancel. Note If your phone supports on-hook transfer, you can alternately complete the transfer by disconnecting. 1. From an active call, choose Options > Trnsfer. 2. Dial the target number. 3. Wait for the transfer recipient to answer. 4. Choose Options > Trnsfer again to complete the transfer or EndCall to cancel. Note If your phone supports on-hook transfer, you can alternately complete the transfer by disconnecting. 1. Scroll to highlight any call on the same line. 2. Choose Options > Select. 3. Scroll to highlight the other call on the same line. 4. Choose Options > DirTrfr. displays by the selected call. The two calls connect to each other and drop you from the call. If you want to stay on the line with the callers, use Join instead. Note Choose Options > iDivert. The call is automatically transferred to your voice message greeting. You can use iDivert with a call that is active, ringing, or on hold. Tips

If on-hook transfer is enabled on your phone, you can either disconnect to complete the transfer, or choose Options > Trnsfer and then disconnect. If on-hook transfer is not enabled on your phone, disconnecting without using Trnsfer again places the call on hold.

You cannot use Trnsfer to redirect a call on hold. To remove the call from hold before transferring it, choose Resume. 42 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling Forwarding Calls to Another Number When enabled by your system administrator, you can use these call forwarding features to redirect incoming calls from your phone to another number:

Unconditional call forwarding (Call Forward All)Applies to all calls that you receive.

Conditional call forwarding (Call Forward No Answer, Call Forward Busy, Call Forward No Coverage)Applies to certain calls that you receive, according to conditions. You can access Call Forward All on your phone or from your User Options web pages; conditional call forwarding features are accessible only from your User Options web pages. If you want to... Set up Call Forward All on your primary line Cancel Call Forward All on your primary line Verify that Call Forward All is enabled on your primary line Set up or cancel call forwarding remotely, or for a non-primary line on your phone Then... Choose Options > CFwdAll, and enter a target phone number. Choose Options > CFwdAll. Look for both of these indicators:

The

The call forward target number in the status line. 1. Log in to your User Options web pages. (See Accessing Your icon next to the primary line. User Options Web Pages, page 89.) 2. Access your call forwarding options. (See Controlling Line Settings on the Web, page 96.) Note When call forwarding is enabled for any line other than the primary line, your phone does not provide you with confirmation that calls are being forwarded. Instead, you must confirm your settings in the User Options web pages. Tips

Enter the call forward target number exactly as you would dial it from your phone. For example, enter an access code or the area code, if necessary.

You can forward your calls to a traditional analog phone or to another IP phone, although your system administrator might restrict the call forwarding feature to numbers within your company.

Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not enabled, the call will ring as usual. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 43 FCS REVIEW DRAFT - CISCO CONFIDENTIAL

Your system administrator can enable a call forward override feature that allows the person receiving your forwarded calls to reach you. With override enabled, a call placed from the target phone to your phone is not forwarded, but rings through.

Your phone may reject your attempt to set up Call Forward All directly on the phone if the target number that you enter would create a call forwarding loop or would exceed the maximum number of links permitted in a call forwarding chain. Using Do Not Disturb You can use the Do Not Disturb (DND) feature to turn off only the ringer on your phone or to turn off all audible and visual notifications of incoming calls. Your system administrator enables DND for your phone. When DND and Call Forward are both enabled on your phone, calls are forwarded and the caller does not hear a busy tone. DND interaction with other types of calls includes:

DND does not affect intercom calls or non-intercom priority calls.

If both DND and auto-answer are enabled, only intercom calls will be auto-answered. If you want to... Turn on DND Then... Do one of the following:

Choose Options > DND.

Press on (

, then select the DND radio button to turn it Do Not Disturb is active displays on the phone and the ring tone is turned off. 44 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling Turn off DND Customize DND settings Do one of the following:

Choose Options > DND.

Press it off (

, then select the DND radio button to turn If your system administrator configured DND settings to appear on the User Options page, follow these steps:

1. Log in to your User Options web pages. See Accessing Your User Options Web Pages, page 87. 2. From the drop-down menu, choose User Options > Device. 3. Set the following options:

Do Not DisturbSet to enable/disable DND.

DND OptionChoose either Call Reject (to turn off all audible and visual notifications) or Ringer Off (to turn off only the ringer).

DND Incoming Call Alert (applies to either DND option set)Set the alert to beep only, flash only, disable the alert, or choose None (to use the Alert setting configured by your system administrator). Making Conference Calls Your Cisco Unified IP Phone allows you to talk simultaneously with multiple parties in a conference call. Using Conference Features You can create a conference in various ways, depending on your needs and the features that are available on your phone:

ConferenceAllows you to create a standard (ad hoc) conference by calling each participant. Use

the Confrn softkey. Conference is available on most phones. JoinAllows you to create a standard (ad hoc) conference by combining existing calls. Use the Join softkey. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 45 FCS REVIEW DRAFT - CISCO CONFIDENTIAL

cBargeAllows you to create a standard (ad hoc) conference by adding yourself to a call on a shared line. Use the cBarge softkey. cBarge is available only on phones that use shared lines.

Meet-MeAllows you to create or join a conference by calling a conference number. Use the MeetMe softkey. Using Conference Conference allows you to call each participant. Conference is available on most phones. If you want to... Create a conference Add new participants to an existing conference See a list of conference participants or remove participants End your participation in a conference Then... 1. From a connected call, choose Options > Confrn. 2. Enter the participants phone number. 3. Wait for the call to connect. 4. Choose Options > Confrn again to add the participant to your call. 5. Repeat to add additional participants. Repeat the steps listed above. Your system administrator determines whether non-initiators of a conference can add or remove participants. Choose Options > ConfList. See Viewing or Removing Conference Participants, page 49. Choose

, EndCall, or Options > EndCall. Tips

Calls must be on the same line before you can add them to a conference. If calls are on different lines, transfer them to a single line before using Confrn or Join.

Depending on how your phone is configured, if you leave a conference after initiating it, the conference might end. To avoid this, transfer the conference before hanging up. Using Join Join allows you to combine two or more existing calls to create a conference in which you are a participant. 46 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling If you want to... Create a conference by joining together existing calls that are on a single line Create a conference by joining together existing calls that are on multiple lines Then... 1. From an active call, press

, highlight another a call that you want to include in the conference, and choose Options >

Select. The selected call displays this Note that the active call is automatically selected. icon. 2. Repeat this step for each call that you want to add. 3. From a selected call, choose Options > Join. 1. From an active call, choose Options > Join. 2. Press and select the line for calls that you want to include in the conference. One of the following occurs:

The calls are joined. You may be prompted to slect the call(s) that you want to join. Highlight the call(s) and choose Options > Select, then Options > Join to complete the action. If your phone does not support Join for calls on multiple lines, transfer the calls to a single line before using Join. Note See a list of conference participants or remove participants Choose Options > ConfList. See Viewing or Removing Conference Participants, page 49. Tips

If you frequently join more than two parties into a single conference, you might find it useful to first select the calls that you want to join, then press Options > Join to complete the action.

When Join completes, caller ID changes to Conference.

You may be able to combine multiple conference calls by using the Join or DirTrfr softkeys. Check with your system administrator to see if this feature is available to you. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 47 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using cBarge You can create a conference by using cBarge to add yourself to a call on a shared line. If you want to... Create a conference by barging a call on a shared line See a list of conference participants or remove participants to select a call on a shared line. Then... 1. Press 2. Choose Options > cBarge. See Using a Shared Line, page 57. Choose Options > ConfList. See Viewing or Removing Conference Participants, page 49. Using Meet-Me Meet-Me conferencing allows you to start or join a conference by calling the conference number. If you want to... Start a Meet-Me conference Then... 1. Obtain a Meet-Me phone number from your system administrator. 2. Distribute the number to participants. 3. When you are ready to start the meeting, choose Options >

MeetMe. 4. Dial the Meet-Me conference number. 5. Press

. Participants can now join the conference by dialing in. Note Participants hear a busy tone if they call the conference before the initiator has joined. In this case, participants must call back. Join a Meet-Me conference 1. Dial the Meet-Me conference number (provided by the conference initiator). 2. Press Note

. You will hear a busy tone if you call the conference before the initiator has joined. In this case, try your call again. End a Meet-Me conference All participants must hang up. The conference does not automatically end when the conference initiator disconnects. 48 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling Tip If you call a secure Meet-Me conference number from a non-secure phone, your phone displays the message, Device Not Authorized. For more information, see Making and Receiving Secure Calls, page 60. Viewing or Removing Conference Participants During a standard (ad hoc) conference, you can view a list of participants and remove participants. If you want to... View a list of conference participants or remove participants Get an updated list of participants See who initiated the conference Remove any conference participant Drop the last participant added to the conference Then... 1. Press 2. Choose Options > ConfList. to select an active conference. Participants are listed in the order in which they join the conference with the most recent additions at the top. While viewing the conference list, choose Options > Update. While viewing the conference list, locate the participant listed at the bottom of the list with an asterisk (*) next to the name. While viewing the conference list, highlight the participants name and choose Options > Remove. You can remove participants only if you initiated the conference. While viewing the conference list, highlight the participants name and choose Options > RmLstC. You can remove participants only if you initiated the conference call. Verify that a conference call is secure Look for the screen. Verify that a participant is calling from a secure phone Look for the phone screen. or icon after Conference on the phone or icon beside the participants name on the Add more participants See Using Conference, page 46. End your participation in a conference Choose

, EndCall, or Options > EndCall. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 49 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Placing or Receiving Intercom Calls You can place an intercom call to a target phone that auto-answers the call in speakerphone mode with mute activated. The one-way intercom call allows you to deliver a short message to the recipient. If the recipients handset or headset is in use, the audio is sent to the device in use. Any current call activity that your recipient is engaged in continues simultaneously. The target destination receives an intercom-alert tone and can then choose to:

Listen to the caller by selecting the intercom line with microphone muted (you can hear the caller, but the caller cannot hear you).

End the intercom call by pressing the EndCall softkey. Do this if you do not want to hear the message.

Talk to the caller by selecting the intercom line, and use either the handset, headset, or speaker. The intercom call becomes a two-way connection so that you can talk with the caller. When using the intercom feature, be aware of the following:

From an intercom line, you can only dial other intercom lines.

You can use only one intercom line at a time.

When your active call is being monitored or recorded, you cannot receive or place intercom calls.

You cannot place an intercom call on hold. Tip If you log into your phone every day using your Extension Mobility profile, make sure that your system administrator configures your Extension Mobility profile to include the intercom feature. If you want to... Place an intercom call to a preconfigured intercom target Then... 1. Press 2. Select

(intercom line) to dial the target intercom number. After you hear the intercom-alert tone, begin speaking. 50 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Basic Call Handling If you want to... Place an intercom call to any intercom number Receive an intercom call Then... 1. Press 2. Select

(intercom line) and dial the intercom target number. After you hear the intercom-alert tone, begin speaking. When you hear the intercom-alert tone, handle the call in one of these ways:

Listen to the message in one-way audio.

Talk to the caller by pressing and selecting the intercom line.

End the call by pressing EndCall. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 51 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Advanced Call Handling Advanced call-handling tasks involve special features that your system administrator might configure for your phone depending on your call-handling needs and work environment. Speed Dialing Speed dialing allows you to press a hot key or select from a listing to place a call. Depending on configuration, your phone can support these speed-dial features:

Speed-Dial Hot Key, page 52

Line View Speed Dial, page 52

Abbreviated Dial, page 53

Fast Dial, page 53 Speed-Dial Hot Key A speed-dial hot key allows you to quickly dial a Phone Book contact number stored locally on your phone. You can set up 99 speed-dial hot keys from your phone. To make a call, simply press and hold the speed-dial hot key or select a number from Directory > Speed Dials. On the main Phone Book screen, depending on the type of phone assigned, these speed-dial icons are displayed:

Work Phone Home Phone Mobile Phone Other Phone In the Phone Book contact details, this speed-dial icon (

to a speed-dial hot key. For more information, see Using Speed Dial and Fast Dial, page 53 and Using the Phone Book on Your Phone, page 82.

) is displayed under the number assigned Line View Speed Dial A Line View speed dial allows you to quickly dial a number that is not stored in your local Phone Book. You set up line view speed-dial numbers from the User Options web page. Up to six numbers (a combination of line and speed-dial numbers) can be displayed on the phone. 52 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Advanced Call Handling To make a call, select a speed dial (

For more information, see Using Speed Dial and Fast Dial, page 53 and Setting Up Speed Dials on the Web, page 90.

) from the Line View. Abbreviated Dial An Abbreviated Dial allows you to dial a number using an Abbreviated Dialing code. You set up Abbreviated Dials from the User Options web page. To make a call, use the Abbreviated Dialing code and the AbbrDial softkey. For more information, see Using Speed Dial and Fast Dial, page 53 and Setting Up Speed Dials on the Web, page 90. Fast Dial A Fast Dial allows you to make a call from a Fast Dial listing. You must first subscribe to the Fast Dial service and set up Fast Dial codes from your User Options web page. You can also assign a Fast Dial code to a Personal Address Book entry on the web. To make a call, choose the Fast Dial service option and select from a Fast Dial listing. For more information, see Using Speed Dial and Fast Dial, page 53, Setting Up Speed Dials on the Web, page 90, and Using Personal Directory on the Web, page 91. Note Your system administrator can configure speed-dial features for you. Using Speed Dial and Fast Dial Before using this feature, you must set up speed-dial features from the Phone Book (see Using the Phone Book on Your Phone, page 82) or on your User Options web pages (See Accessing Your User Options Web Pages, page 87). If you want to... Then... Use speed-dial hot keys to call Phone Book contacts 1. Set up speed-dial hot keys from the Phone Book. 2. Do one of the following:

Press and hold a speed-dial hot key for about two seconds. Note When dialing a two-digit number, enter the first digit, then press and hold the second digit for about two seconds. Choose

> Speed Dials, highlight a speed dial, and press

. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 53 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Then... Use speed-dial numbers to call other numbers

(not in Phone Book) Use Abbreviated Dial 1. Set up speed-dial numbers from your User Options web pages. 2. To place a call, press 3. Scroll to a speed-dial number with its label and press Note

. The Line View displays your directory numbers, followed by your speed-dial numbers identified with

. Six items (lines plus speed dials) can display. 1. Set up Abbreviated Dialing codes from your User Options web pages. 2. To place a call, enter the Abbreviated Dialing code. 3. Choose Options > AbbrDial. Use Fast Dial 1. Subscribe to the Fast Dial service and set up Fast Dial codes from your User Options web pages. See Accessing Your User Options Web Pages, page 87. 2. To place a call, choose

> Fast Dial service on your phone (exact name might vary). 3. Scroll to a listing and press

. Picking Up a Redirected Call on Your Phone Call PickUp allows you to answer a call that is ringing on a coworkers phone by redirecting the call to your phone. You might use Call PickUp if you share call-handling with coworkers. If you want to... Answer a call that is ringing on another extension within your call pickup group Answer a call that is ringing on another extension outside of your call pickup group Then... 1. Choose Options > PickUp. If your phone supports auto-pickup, you are now connected to the call. If the call rings on your phone, press Answer to connect to the call. 2. 1. Choose Options > GPickUp. 2. Enter the group pickup number. If your phone supports auto-pickup, you are now connected to the call. If the call rings, press Answer to connect to the call. 3. 54 OL-16132-01

FCS REVIEW DRAFT - CISCO CONFIDENTIAL Advanced Call Handling If you want to... Answer a call that is ringing on another extension in your group or in an associated group Answer a call that is ringing on a particular extension (line number) Then... 1. Choose Options > OPickUp. If your phone supports auto-pickup, you are now connected to the call. If the call rings, press Answer to connect to the call. 2. 1. Choose Options > GPickUp. 2. Enter the line number with the call that you want to pick up. For example, if the call that you want to pick up is ringing on line 12345, enter 12345. If your phone supports auto-pickup, you are now connected to the call. If the call rings, press Answer to connect to the call. 3. Tips

If multiple calls are available for pickup, your phone picks up the oldest call first (the call that has been ringing for the longest time). If you choose GPickUp and enter a line number, your phone picks up the ringing call on that particular line (if available). If you have multiple lines and want to pick up the call on a non-primary line, first press

(Line View) to switch to the desired line, then choose Options and a Call PickUp softkey.

Depending on how your phone is configured, you might receive an audio and/or visual alert about

a call to your pickup group. If you use the BLF Pickup feature on your phone, see Using BLF to Determine a Line State, page 59. Storing and Retrieving Parked Calls You can park a call when you want to store the call so that you or someone else can retrieve it from another phone in the Cisco Unified Communications Manager system (for example, a phone at a co-workers desk or in a conference room). You can park a call by using these methods:

Call ParkUse the Park softkey to store the call. Your phone displays the call park number where the system stored your call. You must record this number and then use the same number to retrieve the call.

Directed Call ParkUse the Transfer softkey to direct the call to an available directed call park number that you dial or speed dial. To retrieve the call from a directed call park number, dial the park retrieval prefix, then dial or speed dial the same directed call park number. You can use a speed-dial as the directed call park number and to monitor whether a directed call park number is occupied or available. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 55 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Store an active call using Call Park Retrieve a parked call Direct and store an active call at a directed call park number Retrieve a parked call from a directed call park number Then... 1. During a call, choose Options > Park. 2. Note the call park number that displays on your phone screen. 3. Press Enter the call park number from any Cisco Unified IP Phone in your network to connect to the call. 1. During a call, press Transfer. 2. Choose a speed-dial number with a park-unoccupied icon

. to speed dial the directed call park number. A speed-dial number with park-occupied icon directed call park number is not available. indicates the Note If BLF is not configured for the speed-dial number, the icon will not show whether the directed call park number is available or not. 3. Press Transfer again to finish storing the call. From any Cisco Unified IP Phone in your network, enter the park retrieval prefix and dial the directed call park number. Tip You have a limited time to retrieve a parked call before it reverts to ringing at the original number. See your system administrator for details. Logging Out of Hunt Groups If your organization receives a large number of incoming calls, you might be a member of a hunt group. A hunt group includes a series of directory numbers that share the incoming call load. When the first directory number in the hunt group is busy, the system hunts for the next available directory number in the group and directs the call to that phone. When you are away from your phone, you can prevent hunt group calls from ringing your phone by logging out of hunt groups. If you want to... Log out of hunt groups to temporarily block hunt group calls Log in to receive hunt group calls Then... Choose Options > HLog. Your phone screen displays, Logged out of Hunt Group. Choose Options > HLog. Tip Logging out of hunt groups does not prevent non-hunt group calls from ringing your phone. 56 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Advanced Call Handling Using a Shared Line Your system administrator might ask you to use a shared line if you:

Have multiple phones and want one phone number

Share call-handling tasks with coworkers

Handle calls on behalf of a manager Understanding Shared Lines Remote-in-Use The In Use Remote message and icon display on your phone when another phone that shares your line has a connected call and Privacy is disabled. You can place and receive calls as usual on the shared line, even when the In Use Remote message or icon displays. Sharing Call Information and Barging Phones that share a line each display information about calls that are placed and received on the shared line. This information might include caller ID and call duration. (See the Privacy section for exceptions.) When call information is visible in this way, you and coworkers who share a line can add yourselves to calls using either Barge or cBarge. See Using Barge to Add Yourself to a Shared-Line Call, page 57. BargeAllows you to join a shared-line call with an IP phone that has the built-in bridge enabled. cBargeAllows you to join a shared-line call with any IP phone and convert the call to a conference. Privacy The wireless IP Phone has Privacy enabled by default. Coworkers, who share your line, cannot see information about your calls. If you want coworkers who share your line to see information, you must have the Privacy feature configured on your phone. See Preventing Others from Viewing or Joining a Shared-Line Call, page 59. Note The phone can support a maximum of 24 calls on a shared line. Using Barge to Add Yourself to a Shared-Line Call You can use barge featues (cBarge or Barge) to add yourself to calls on your shared line. (Calls must be non-private calls. See Understanding Shared Lines, page 57. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 57 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Understanding Barge Features cBarge and Barge Depending on how your phone is configured, you can add yourself to a non-private call on a shared line using either Barge or cBarge.

cBarge converts the call into a standard conference, allowing you to add new participants. (See Making Conference Calls, page 45 for more information about standard conferences.)

Barge allows you to add yourself to the call but does not convert the call into a conference or allow you to add new participants. Using Barge Features The table below describes how to use barge features (cBarge or Barge) to add yourself to a call on a shared line. If you want to... See if the shared line is in use Add yourself to a call on a shared line View conference participants Leave a barged call Then... Look for the icon and the In Use Remote message. 1. Highlight a remote-in-use call. You might need to use Line View. 2. Choose Options > Barge or cBarge. See Viewing or Removing Conference Participants, page 49. Choose EndCall or If you disconnect after using Barge, the remaining parties hear a disconnect tone and the original call continues. If you disconnect after using cBarge, the call remains a conference call

(provided at least three participants remain on the line). Tips

When you barge a call, other parties hear a beep tone announcing your presence. With cBarge, other parties hear a brief audio interruption and the phone screen changes to display conference details. If a phone that is using the shared line has Privacy enabled, call information and barge softkeys will not appear on the other phones that share the line.

You will be disconnected from a call that you have joined using Barge if the call is put on hold, transferred, or turned into a conference call. 58 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Advanced Call Handling Preventing Others from Viewing or Joining a Shared-Line Call If you share a phone line, you can use the Privacy feature to prevent others who share the line from viewing or barging (adding themselves to) your calls. If you want to... Prevent others from viewing or barging calls on a shared line Allow others to view or barge calls on a shared line Then... 1. Choose Options > Private. 2. To verify that Privacy is on, look for icon) next to the directory number. 1. Choose Options > Private. 2. To verify that Privacy is off, look for icon) next to the directory number.

(Privacy-enabled

(Privacy-disabled Tips

If the phone that shares your line has Privacy enabled, you can make and receive calls using the shared line as usual.

The Privacy feature applies to all shared lines on your phone. Consequently, if you have multiple shared lines and Privacy is enabled, coworkers cannot view or barge calls on any of your shared lines. Using BLF to Determine a Line State Busy Lamp Field (BLF) features allow you to view the state of a phone line that is associated with a speed dial, call log, or directory listing on your phone. If you use BLF Pickup, you can answer a ringing call for the line that you are monitoring. Your system administrator determines which BLF features are configured for your phone. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 59 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... See the state of a line listed in a call log or directory See the state of a line listed in a speed-dial line Then... Look for one of these indicators next to the line number:

Line is in-use. Line is idle. Line is in Do Not Disturb state. Line is ringing. BLF indicator unavailable for this line. Look for one of these indicators next to the line number:

Line is in-use. Line is idle. Line is in Do Not Disturb state. Line is ringing (BLF Pickup only). BLF indicator unavailable for this line. Use BLF Pickup to answer a call ringing on a coworkers phone

(Select button). Highlight the ringing line and press The call is redirected to your phone. If your phone supports auto-pickup, the call connects automatically. Otherwise, the call rings on your phone for you to answer. Note If you chose Options > Pickup or GPickup when the monitored line is not ringing, your phone will speed dial the line number. Tips

Your phone might play an audible indicator to alert you when a call is ringing on the monitored line (BLF Pickup only).

BLF Pickup answers the oldest ringing call first (if the line that you are monitoring has more than one ringing call). Making and Receiving Secure Calls Depending on how your system administrator has configured your phone system, your phone might support making and receiving secure calls. 60 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Advanced Call Handling Your phone can support these types of calls:

Authenticated callThe identities of all phones participating in the call have been verified.

Encrypted callThe phone is receiving and transmitting encrypted audio (your conversation) within the Cisco IP network. Encrypted calls are also authenticated.

Protected callThe phone is receiving and transmitting encrypted audio (your conversation) with another phone. A protected call provides a similar level of security as an encrypted call, but adds additional security. If the call is protected at both ends, a security tone plays at the beginning of the conversation. Some features, such as conference calling, shared lines, Extension Mobility, and join across lines are not available when protected calling is configured. Protected calls are not authenticated.

Non-secure callAt least one of the participating phones or the connection does not support these security features, or the phones cannot be verified. If you want to... Check the security level of a call Then... Look for a security icon in the top right corner of the call activity area, next to the call duration timer:

Authenticated call or conference Encrypted call or conference Neither security icon appears if the call is non-secure. Look for the encrypted lock icon and listen for a security tone at the beginning of a call. When encrypted calling is configured on your phone, the lock icon is displayed. However, the conversation is protected only when the security tone plays at the beginning of a call, indicating that the call is protected on both ends of the call. If your call is connected to a non-protected phone, the secure tone is not played. Contact your system administrator. Verify that the phone on the other end of the connection is also secure Determine if secure calls can be made in your company Note There are interactions, restrictions, and limitations that affect how security features work on your phone. For more information, ask your system administrator. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 61 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Tracing Suspicious Calls If you are receiving suspicious or malicious calls, your system administrator can add the Malicious Call Identification (MCID) feature to your phone. This feature enables you to identify an active call as suspicious, which initiates a series of automated tracking and notification messages. If you want to... Notify your system administrator about a suspicious or harassing call Then... Choose Options > MCID. Your phone plays a tone and displays the message, MCID successful. Prioritizing Critical Calls In some specialized environments, such as military or government offices, you might need to make and receive urgent or critical calls. If you have the need for this specialized call handling, your system administrator can add Multilevel Precedence and Preemption (MLPP) to your phone. Keep these terms in mind:

Precedence indicates the priority associated with a call.

Preemption is the process of ending an existing, lower priority call while accepting a higher priority call that is sent to your phone. If you... Want to choose a priority

(precedence) level for an outgoing call Want to make a priority

(precedence) call Hear a special ring (faster than usual) or special call waiting tone Want to view priority level of a call Then... Contact your system administrator for a list of corresponding precedence numbers for calls. Enter the MLPP access number (provided by your system administrator) followed by the phone number. You are receiving a priority (precedence) call. An MLPP icon on your phone screen indicates the priority level of the call. Look for an MLPP icon on your phone screen:

Priority Call Medium priority (immediate) call High priority (flash) call Highest priority (flash override) or Executive Override call Higher priority calls are displayed at the top of your call list. If you do not see an MLPP icon, the priority level of the call is normal (routine). 62 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Advanced Call Handling If you... Want to accept a higher-priority call Hear a continuous tone interrupting your call Then... Answer the call as usual. If necessary, end an active call first. You or the other party are receiving a call that must preempt the current call. Disconnect immediately to allow the higher priority call to ring through. Tips

When you make or receive an MLPP-enabled call, you will hear special ring tones and call-waiting tones that differ from the standard tones. If you enter an invalid MLPP access number, a verbal announcement will alert you of the error.

An MLPP-enabled call retains its priority and preemptive status when you:

Put the call on hold Transfer the call Add the call to a three-way conference Answer the call using PickUp

MLPP overrides the Do Not Disturb feature. Using Cisco Extension Mobility Cisco Extension Mobility (EM) allows you to temporarily configure a Cisco Unified IP Phone as your own. Once you log in to EM, the phone adopts your user profile, including your phone lines, features, established services, and web-based settings. Your system administrator must configure EM for you. If you want to... Log in to EM Log out of EM

> EM Service (name can vary). Then... 1. Choose 2. Enter your user ID and PIN (provided by your system administrator). 3. 1. Choose 2. When prompted to log out, press Yes. If prompted, select a device profile.

> EM Service (name can vary). Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 63 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Tips

EM automatically logs you out after a certain amount of time. You system administrator establishes this time limit.

Changes that you make to your EM profile (from the User Options web pages) take effect the next time that you log in to EM on a phone.

Settings that are controlled on the phone only are not maintained in your EM profile.

(on left side of phone) can be used to start applications such as Push to Using the Application Button The Application Button Talk or other services on your phone. Depending on how the Application Button is configured by your system administrator, you may be able to use it from the main phone screen only, or you may use it from any menu or service, or even when the phone is locked. The Application Button can also be configured to start an application immediately after you press it, or only after you hold it for several seconds. For more information, see your system administrator. Using the Push to Talk Service The Push to Talk service provides immediate communication (similar to a two-way radio) with members of your organization. Your system administrator must set up the Push to Talk service by using an XML application, and then you must subscribe to this service. If you want to... Access Push To Talk service Use Push to Talk service Then... See Subscribing to Phone Services, page 88 for systems using Cisco Unified CallManager 4.1 or later. See Setting Up Phone Services on the Web, page 94 for systems using Cisco Unified Communications Manager 5.0 or later. 1. Choose

> Push to Talk (name can vary). Push to Talk service is active when the icon displays. 2. Use the button to start and end a transmission depending on how your service is configured. You can also use the Talk and Stop softkeys to toggle between transmitting and listening. Note Your system administrator will provide detailed information about how to use your Push to Talk service. 64 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using a Handset, Headset, and Speakerphone Using a Handset, Headset, and Speakerphone You can use your phone as a mobile handset, a speakerphone, or with a headset (wired or Bluetooth wireless). If you want to... Then... Use the handset Press

; to hang up, press

. Use a wired headset Use a Bluetooth wireless headset Use the speaker mode and plug the headset connector into icon displays on the phone status line. Lift the headset port cover the headset port. The Place and answer calls as usual. If you use AutoAnswer, see Using AutoAnswer, page 69 for exceptions. You can use the headset with all the controls on your phone, including and

. The headset audio remains active when the headset is connected to the phone. 1. Enable the Bluetooth setting on your phone. 2. Scan for a list of Bluetooth devices. 3. Select and pair the Bluetooth headset with the phone. For more information, see Using Bluetooth Wireless Headsets, page 66. Press and hold Note until the icon displays. You can activate the speakerphone before making a call or during a call. The speaker mode remains active for future calls until toggled off. Note You can activate the speakerphone (on the phone) even when the phone is docked in the desktop charger and connected to a wired headset. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 65 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Then... Switch to the speaker (from the handset) during a call Press and hold Press and hold until the to toggle back to the handset. icon displays. Adjust the volume level for a call During a call, press or headset. to adjust the volume for the handset, speaker, Note The new volume level is preserved for future calls after the phone is powered off. Tip If you unplug the headset or remove the phone from the desktop charger, the phone reverts to the speaker mode for features that typically use the speakerphone for incoming calls, such as AutoAnswer or intercom calls. Obtaining Headsets Your phone supports wired headset jack types with a 2.5 mm, 3-band/ 4 connector. For information about purchasing headsets, see Headset Information, page 16. Using Bluetooth Wireless Headsets Your phone supports the use of Bluetooth wireless headsets. Enable the Bluetooth setting on your phone before performing tasks such as scanning, pairing, and unpairing. Note Before pairing the Bluetooth headset with the phone, follow the instructions in the headset documentation to enable it for operation. 66 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using a Handset, Headset, and Speakerphone If you want to... Enable/disable Bluetooth on your phone Then... 1. Choose 2. Highlight Bluetooth and press Select. 3. Select Enable or Disable, then press Save.

> Phone Settings > Bluetooth. If enabled, the Bluetooth enabled icon icon disappears. appears. If disabled, the Note Bluetooth must be enabled on the phone before you can perform tasks such as scanning, pairing, and unpairing. Scan for Bluetooth devices

> Phone Settings > Bluetooth > Device List. 1. Choose 2. Press Scan. A list of devices appears. Note It may take a few seconds for the scan to complete. You might need to rescan for a device. To rescan, press Rescan from Scan Results. Pair a Bluetooth headset with the phone 1. From the Scan Results list, select a Bluetooth headset and press Pair. 2. When prompted, enter the Bluetooth Passkey, then press

(Select) or Options > OK. Note Obtain the Bluetooth Passkey from your Bluetooth device documentation. Pairing must be completed within one minute or it will fail. 3. 4. If the pairing succeeds, the newly paired headset is added to the Device List and becomes connected to the phone (if no prior Bluetooth connection exists between another device and the phone.) If a prior connection exists, first unpair or disconnect the other device from the phone. The Bluetooth device connected icon checkmark appears next to the device name. If the pairing fails, press Back to retry. is displayed, and a Connect a Bluetooth headset already paired (but not connected) with the phone Do one of the following:

Tap on the headset to send a connection request to the phone.

Choose

> Phone Settings > Bluetooth > Device List, highlight the headset, and press Options > Connect. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 67 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Unpair a Bluetooth headset from the phone Disconnect a Bluetooth headset from the phone Switch from a Bluetooth headset to the speaker or handset during a call Switch to the Bluetooth headset during a call from the speaker or handset

> Phone Settings > Bluetooth > Device List. 1. Choose 2. Select a headset from the list, press Options > Unpair. 3. Press Yes to confirm. The headset disconnects from the phone and is removed from the Device List.

> Phone Settings > Bluetooth > Device List. 1. Choose 2. Select a headset from the list, press Options > Disconn. 3. Press Yes to confirm. The headset disconnects from the phone but remains on the Device List (without a checkmark next to the device name). 1. Press and hold 2. Select Speaker or Handset. 3. To switch modes again, press and hold

. The Select Audio Path menu appears.

, and select another audio mode. Note After the call, the phone remains in the last audio mode it used during the call. The Select Audio Path menu appears. 1. Press and hold 2. Select Bluetooth. Note If a wired headset is connected to the phone, the Bluetooth option will not be available for selection even if the Bluetooth connected icon is displayed. To use the Bluetooth headset, you must first unplug the wired headset. Tips

Only one Bluetooth device can be connected to the phone at one time.

A Bluetooth device must remain within 10 m of the phone to keep the connection.

A Bluetooth device will be disconnected if the phone is powered off or if Bluetooth is disabled on the phone. If a device previously paired with the phone is used to connect to another Bluetooth device, you must first unpair it, then pair it again with the phone. If a Bluetooth headset becomes disconnected (being out-of-range of the phone or the phone battery loses power), it should automatically reconnect when it is in-range again or the battery is recharged. If it does not reconnect, you can tap on the Bluetooth headset once to reestablish the connection. If a Bluetooth headset is in power-save mode and becomes disconnected from the phone, you may need to tap the headset once to wake it to reestablish a connection. OL-16132-01

68 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using a Handset, Headset, and Speakerphone Using AutoAnswer You might use AutoAnswer if you receive a high volume of incoming calls or handle calls on behalf of others. Your system administrator configures AutoAnswer to work with either your speaker mode or headset. If you... Then... Use AutoAnswer with a headset Keep headset mode active by ensuring the headset is plugged into the phone, even when not on a call. If your phone is set up to use AutoAnswer in headset mode, calls are answered automatically only if the wired headset Bluetooth enabled ring normally and you must manually answer them. icon is in the phone status line. Otherwise, calls icon or the Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 69 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Changing Phone Settings You can personalize your wireless IP phone by adjusting sound settings, volume levels, display options, and keypad settings. You can also view your Network Profiles from the Settings menu. Customizing Rings You can customize your phone by choosing a ring type for each line. If you want to... View the ring tone settings on your lines Change the ring tone on a line Assign a ring tone to a line

> Phone Settings > Sound Settings. Then... 1. Choose 2. Select Ring Tone > Current Settings. 3. Press View to see the current line settings. 1. Choose 2. Select Ring Tone > Current Settings. 3. Press View to see the current line settings. 4. Select a line. Note

> Phone Settings > Sound Settings. To make a line selection, press the number key for the item, the button, or the Change softkey. 5. Scroll to a ring tone in the list and press Play to hear a sample of the ring. and the icon appears next to the chosen ring. 6. Press 7. Choose Options > Save to make the change or Options > Cancel. 1. Choose 2. Select Ring Tone > Available Ring Tones. 3. Scroll to a ring tone in the list and press Play to hear a sample of

> Phone Settings > Sound Settings. the ring. 4. Choose Options > Apply and select the line for the ring tone. displays by the selected line. 5. Press Save to make the change or Cancel. 70 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Changing Phone Settings If you want to... Change the way the phone rings Then... 1. Choose 2. Select one of the following:

> Sound Settings > Alert Pattern.

Ring Only

Vibrate Only

Silent

Vibrate, Then Ring

Vibrate And Ring The appears next to your selection. 3. Press Save to make the change, or Cancel. Note This change applies only to the handset and not the desktop charger. Tips

You cannot modify the Ring Settings for the wireless IP phone from the User Options web pages.

To return to the Settings menu, press Back after saving the change or press to return to the main screen. Customizing Volume Settings You can adjust the ring and speaker volume settings for your phone. Then... 1. Choose 2. Select Ring. Note If you want to... Adjust the ring volume level Adjust the speaker volume level

> Phone Settings > Sound Settings > Volumes. To make a ring selection, press the number key for the item, the button, or the Change softkey. 3. Press to increase the volume or to decrease the volume and hear a sample ring volume.

> Phone Settings > Sound Settings> Volumes. 4. Press Save to make the change or Cancel. 1. Choose 2. Select Speaker. 3. Press 4. Press Save to make the change or Cancel. to increase the volume or to decrease the volume. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 71 FCS REVIEW DRAFT - CISCO CONFIDENTIAL

> Phone Settings > Sound Settings > Volumes. to decrease the volume.

> Phone Settings > Sound Settings. If you want to... Adjust the phone volume level Adjust the headset volume level Select the devices that will ring to increase the volume or Then... 1. Choose 2. Select Handset. 3. Press 4. Press Save to make the change or Cancel. 1. Choose 2. Select Headset. 3. Press 4. Press Save to make the change or Cancel. 1. Choose 2. Select Ring Output. 3. Select one of the following:

to increase the volume or

> Phone Settings > Sound Settings. to decrease the volume.

Headset

Speaker (default setting)

Headset and Speaker The appears next to your selection. 4. Press Save to make the change or Cancel. Ring output applies only to wired headsets, not Bluetooth headsets. Customizing the Phone Screen You can customize the left softkey (when the phone is idle), your phone screen display brightness, and the language on your phone screen. If you want to... Set up the left softkey to open the Phone Book Set up the left softkey to access your messages

> Phone Settings > Customize Home Page. Then... 1. Choose 2. Press Change. 3. Select Phone Book. 4. Press Save. The left softkey will be displayed as Ph Book when the phone is idle.

> Phone Settings > Customize Home Page. 1. Choose 2. Press Change. 3. Select Message. 4. Press Save. The left softkey will be displayed as Message when the phone is idle. 72 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Changing Phone Settings If you want to... Change the phone display brightness Change the length of time for the screen to display Change the LED indication for service coverage

> Phone Settings > Display Settings. Then... 1. Choose 2. Highlight Display Brightness, then press 3. Press 4. Press Save to make the change or Cancel. 1. Choose 2. Highlight Display Timeout, then press 3. Select one of the following:

to increase the brightness or

> Phone Settings > Display Settings. or Change. or Change. to decrease the brightness.

10 Seconds

30 Second (default setting)

1 Minute

2 Minutes 4. Press Save to make the change or Cancel. Note When the display setting time has expired, the screen dims for 10 seconds, then goes dark.

> Phone Settings > Display Settings. 1. Choose 2. Highlight LED Coverage Indicator, then press 3. Select one of the following:

or Change.

Enable (default setting)

Disable Change the language on your phone screen 4. Press Save to make the change or Cancel. 1. Log in to your User Options web pages. (See Accessing Your User Options Web Pages, page 87.) 2. Change the language setting. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 73 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Changing Keypad Settings You can set the keypad to automatically lock, to make tones, and to answer a call. See these sections for more information:

Using Any Key to Answer the Phone, page 74

Setting the Keypad to Automatically Lock, page 75

Changing the Keypad Tones, page 76 Using Any Key to Answer the Phone You can set your phone to allow the use of any key to answer a call. If you want to... Answer calls by pressing any key Disable the Any Key Answer option

> Phone Settings > Keypad Settings. Then... 1. Choose 2. Select Any Key Answer. 3. Select Enable. 4. Press Save to make the change or Cancel. Note 1. Choose 2. Select Any Key Answer. 3. Select Disable. 4. Press Save to make the change or Cancel. Note Under the Any Key Answer option, Enabled displays.

> Phone Settings > Keypad Settings. Under the Any Key Answer option, Disabled displays. 74 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Changing Phone Settings Setting the Keypad to Automatically Lock To keep from pressing keys and redialing calls accidentally, use the keypad auto lock feature. You can set the length of time before your phone keypad automatically locks after completing a call. If you want to... Automatically lock the keypad after using the phone Then... 1. Choose 2. Select Keypad Auto Lock. 3. Select one of these time intervals:

> Phone Settings > Keypad Settings. Unlock the keypad Turn off the automatic keypad lock

15 seconds

30 seconds

60 seconds 4. Press Save to make the change or Cancel. Note After the chosen time interval expires, the and the keypad is locked. icon displays, 1. Press any key and the screen displays Unlock keypad?

2. Press Unlock and then OK. Note You must press the Unlock and OK softkeys as soon as they appear, or the keypad remains locked.

> Phone Settings > Keypad Settings. 1. Choose 2. Select Keypad Auto Lock. 3. Select Disable. 4. Press Save to make the change or Cancel. Note Under the Keypad Auto Lock option, Disabled displays. Tips

Auto lock is enabled only when the phone is idle and at the main screen.

The keypad lock is temporarily disabled when you have an incoming call. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 75 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Changing the Keypad Tones You can enable or disable the tones when you press a key on your keypad. Change the keypad tone level

> Phone Settings > Keypad Settings. 1. Choose 2. Select Keypad Tone. 3. Select one of the following:

DisablePlays no keypad tone.

NormalPlays tone when keys are pressed.

LoudPlays louder tone when keys are pressed. The icon appears next to your selection. 4. Press Save to make the change or Cancel. Viewing Your Network Profile List Network profiles provide predefined settings for access to the wireless network and for authentication and encryption in your system. Your system administrator defines network profiles. You might have more than one network profile available to you, so you can access wireless network configurations at locations that use different SSIDs or authentication types. Your phone can have up to four enabled network profiles. Your phone automatically scans the profiles and selects the network profile with the matching SSID and settings for that specific wireless network. Note Consult with your system administrator if you need to have additional network profiles or change settings in a profile. If you want to... View the list of enabled Network Profiles Then... Choose The enabled profiles have the Note

> Network Profiles. next to them. Because Network profiles are locked, your system administrator must make changes for you. Tips

When the

locked icon appears next to a menu, see your system administrator for information. If you need to change your EAP or LEAP username and password, see Setting Username and Passwords, page 15, and consult with your system administrator. 76 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using Call Logs and Directories Using Call Logs and Directories This section describes how you can use call logs and directories in the Directory menu. Using Call Logs Your phone maintains records of your missed, placed, and received calls. If you want to... View your call logs Dial from a call log Display details for a single call record Erase a single call record Erase all call records in a single log Then... 1. Press 2. Choose Missed Calls, or Received Calls, or Placed Calls. Each call log

. stores up to 100 records. 1. Press 2. Choose Missed Calls, or Received Calls, or Placed Calls. 3. Scroll to a phone number. Note To edit the displayed number (to add or to remove a prefix), press Options > EditDial followed by keypad to enter digits, or press << to delete numbers. or to reposition the cursor. Use the

. 4. Press Dial or 1. Press 2. Choose Missed Calls, or Received Calls, or Placed Calls. 3. Highlight a call record. 4. Press Details. Doing so displays information such as called number, calling number, time of day, and call duration (for placed and received calls only). 1. Press 2. Choose Missed Calls, or Received Calls, or Placed Calls. 3. Scroll to a call record. 4. Choose Options > Delete, or choose Options > Exit. 1. Press 2. Choose Missed Calls, or Received Calls, or Placed Calls. 3. Choose Options > Delete, or choose Options > Exit. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 77 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Erase all call records in all call logs See if the line in the call log is busy before placing a call to that line Then... 1. Press 2. Press Clear. Doing so erases all call logs, or choose Options > Exit. to display call logs. Look for Busy Lamp Field indicators. See Using BLF to Determine a Line State, page 59. Tip

Your phone might be set up for international call logging, which is indicated by a + symbol on the call logs, redial, or call directory entries. See your system administrator for more information.

To view the complete call record of a multiparty call (for example, of a call that has been forwarded or transferred to you), highlight the call record and choose Details. The Details record shows two entries for each missed or received multiparty call. The entries are listed in reverse chronological order:

The first logged entry is the name/number of the last completed call of a multiparty call received on your phone. The second logged entry is the name/number of the first completed call of a multiparty call received on your phone. Directory Dialing Depending on configuration, your phone can provide access to a corporate directory and personal directory features:

Corporate DirectoryCorporate contacts that you can access on your phone. Your system administrator sets up and maintains Corporate Directory.

Personal DirectoryIf available, personal contacts and associated speed-dial codes that you can configure and access from your phone and User Options web pages. Personal Directory comprises the Personal Address Book (PAB) and Fast Dials. PAB is a directory of your personal contacts. Fast Dial allows you to assign codes to PAB entries for quick dialing. 78 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using Call Logs and Directories Using Corporate Directory on Your Phone You can use a corporate directory to place calls to coworkers. If you want to... Dial from a corporate directory (while not on another call) Then... 1. Choose vary).

> Directory Services > Corporate Directory (name can 2. Use your keypad to enter a search criteria such as a name. 3. Choose 4. Scroll to a listing. Note or Options > Submit. To edit the displayed number (to add or to remove a prefix), choose Options > EditDial followed by the keypad to enter digits, or press << to delete numbers. to reposition the cursor. Use or See if the phone line in the directory is busy 5. Press Dial or Look for Busy Lamp Field indicators. See Using BLF to Determine a Line State, page 59. Tips

Use the numbers on your keypad to enter characters on your phone screen. See Entering and Editing Text, page 15.

Use the Navigation button on your phone to move between input fields. Using Personal Directory on Your Phone The Personal Directory feature set contains your Personal Address Book (PAB) and Fast Dials. Cisco Unified CallManager Release 4.3 and Later For information about how to set up and use the Personal Directory when connected to a Cisco Unified CallManager 4.3 or later system, refer to Customizing Your Cisco IP Phone on the Web:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guide_list.html Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 79 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Cisco Unified Communications Manager Release 5.1 and Later This section describes how to set up and use Personal Directory on your phone when you are connected to a Cisco Unified Communications Manager 5.0 or later. Alternately, see Using Personal Directory on the Web, page 91. If you want to... Access Personal Directory (for PAB and Fast Dial codes) Search for a PAB entry Dial from PAB entry Delete a PAB entry Edit a PAB entry Then... 1. Choose

> Directory Services > Personal Address Book (PAB) Service (exact name may vary). 2. Enter your Cisco Unified Communications Manager user ID and PIN, then press Options > Submit. 1. Access Personal Address Book. 2. Enter search criteria and choose Options > Submit. Note To get a complete list of your PAB entries, do not enter any search criteria, and choose Options > Submit. 3. You can choose Options > Previous or Next to move through listings. 4. Scroll to the PAB listing that you want and press Select or 1. Search for a PAB entry. 2. Scroll to the listing and press Select or 3. Press Dial. 4. Scroll to the number that you want to dial and press OK. 5. Press OK again to dial the number. 1. Search for a PAB entry. 2. Scroll to the listing and press Select or 3. Choose Options >Delete. 4. Press OK to confirm the deletion or Cancel. 1. Search for a PAB entry. 2. Scroll to the listing and press Select or 3. Choose Options > Edit to modify a name or mail address. 4. 5. Press Update. If necessary, choose Options > Phones to modify a phone number. 80 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using Call Logs and Directories If you want to... Add a new PAB entry Then... 1. Access Personal Address Book. 2. Access the Search page and choose Options > Submit. (You do not need to input search information first.) 3. Choose Options > New. 4. Use the keypad to enter a name or nickname. 5. Press Phones and use the keypad to enter phone numbers. Be sure to include any necessary access codes such as a 9 or 1. 6. Press Submit to add the entry to the database. 1. Search for a PAB entry. 2. Scroll to the listing and press Select or 3. Choose Options > Fast Dial. 4. Scroll to the Fast Dial code that you want to assign to the number and

. press Select or

> Personal Fast Dials.

> Personal Address Book. 1. Choose 2. Select Personal Fast Dials. 3. Scroll to a Fast Dial code that is unassigned and press Select or 4. Press Assign. 5. Enter a phone number. 6. Press Update. 1. Choose 2. You can choose Options > Previous or Next to move through listings. 3. Scroll to the listing you want and press Select or 1. Search for a Fast Dial code. 2. Scroll to the listing you want and press Select or 3. Press Dial. 4. Choose OK to complete the action. 1. Search for a Fast Dial code. 2. Scroll to the listing you want and press Select or 3. Choose Options > Remove. 1. Choose 2. Choose Logout.

> Personal Address Book (exact name may vary). Assign a Fast Dial code to a PAB entry Add a new Fast Dial code (not using a PAB entry) Search for Fast Dial codes Place a call using a Fast Dial code Delete a Fast Dial code Log out of Personal Directory Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 81 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Tips

Your system administrator can provide the user ID and PIN that you need to log in to Personal Directory.

Personal Directory automatically logs you out after a certain amount of time. This time limit can vary. Ask your system administrator for more information.

Use the numbers on your keypad to enter characters on your phone screen. Use the Navigation button on your phone to move between input fields.

Your phone might be set up for international call logging, which is indicated by a + symbol on the call logs, redial, or call directory entries. See your system administrator for more information. Using the Phone Book on Your Phone You can store information (such as work phone and mobile phone numbers, and company name) for up to 100 contacts in the Phone Book on your phone. Note Note You can customize the left softkey to open the Phone Book. If customized this way, the left softkey is displayed as Ph Book. For more information, see Customizing the Phone Screen, page 72. Your system administrator can import up to 100 contacts into your Phone Book if they are stored in a file using XML or CSV format, such as your contacts in Microsoft Outlook or the Cisco Unified Wireless IP Phone 7920. For more information, see your system administrator. 82 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using Call Logs and Directories If you want to... Add a contact to your phone book Assign a primary number for a contact Change the name or company information for a contact Change a phone number for a contact Then... 1. Choose 2. Do one of the following:

> Phone Book or press Ph Book (if available). Press New (if Phone Book is empty). Choose Options > New (if Phone Book is not empty). 3. At the New Contact screen, fill in contact information. 4. When finished, press Options, then choose Save to save the information, or press Cancel.

> Phone Book or press Ph Book (if available). 1. Choose 2. Highlight a contact name and choose Options > Details. 3. Select a number:

home phone, work phone, mobile phone, or other phone, and choose Options > Primary. A

(checkmark) appears next to that number. Note The default primary number for a contact is the work phone. You can assign any number as the primary number. 1. Choose 2. Highlight a contact name and press

> Phone Book or press Ph Book (if available). to view the details. You may also choose Options > Details. 3. Select the information field and press Change. 4. Enter your changes. When finished, press Options, then choose Save to save the information, or press Cancel. 1. Choose 2. Highlight a contact name and press

> Phone Book or press Ph Book (if available). to view the details. You may also choose Options > Details. 3. Select a number:

work phone, home phone, mobile phone, or other phone, and choose Options > Change. 4. Enter your changes. When finished, press Options, then choose Save to save the information, or press Cancel. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 83 If you want to... Search for a contact in your phone book Remove a contact from the phone book Dial the primary phone number for a contact Dial any phone number for a contact Clear all entries from your phone book Copy a phone number from a call log or directory to a new phone book contact FCS REVIEW DRAFT - CISCO CONFIDENTIAL Then... 1. Choose 2. Choose Options > Mode and enter the text to search. You can search for

> Phone Book or press Ph Book (if available). first name, last name, nickname, and company name. Note You can enter search text in one of two ways: by pressing a key one or more times until you see the letter or number you need, or by having possible matches automatically display after pressing one or more keys

(predictive text). Choose Options > Mode again to change the way you enter search text. 1. Choose 2. Highlight a contact name and choose Options > Delete.

> Phone Book or press Ph Book (if available). The contact is removed and the speed dial for this contact number will be unassigned. 1. Choose 2. Highlight a contact name. The primary phone number for this contact is or Options

> Phone Book or press Ph Book (if available). displayed on the lower left. To dial this number, press

> Dial. Note The default primary number for a contact is the work phone. You can change the primary number to be any number for this contact.

> Phone Book or press Ph Book (if available). 1. Choose 2. Highlight a contact name, then do one of the following:

Scroll left or right until you see the icon for the phone number you wish to dial:

phone, or work phone, home phone, other phone. mobile Choose Options > Details, highlight a phone number, and press or Options > Dial.

> Phone Book or press Ph Book (if available). 1. Choose 2. Press Options and select DeleteAll. 1. Choose 2. Scroll to a phone number, choose Options > Store > New Contact. The

> Missed Calls, or Received Calls, or Placed Calls. Store Contact screen appears. 3. Enter the information for: First Name, Last Name, Nickname, and Company. 4. When finished, choose Options > Save, then select the phone type to store the number. 84 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using Call Logs and Directories If you want to... Copy a phone number from a call log or directory to an existing phone book contact Assign a speed dial to a contact number in your phone book

(from the Speed Dial screen) Assign a speed dial to a contact number in your phone book

(from the main phone screen) Unassign a speed dial Then... 1. Choose 2. Scroll to a phone number, choose Options > Store > Use Existing

> Missed Calls, or Received Calls, or Placed Calls. Contact. 3. On the Phone Book contacts list, highlight a name. 4. Select the phone type to store the number. 1. Choose 2. Highlight an unassigned speed dial and press Assign. A list of Phone

> Speed Dials. Book contacts appears. 3. Highlight a name. Choose the primary number, or scroll left or right to choose another number, then press Select. The selected number is assigned to the speed dial. Note Note Speed dial 1 is always assigned to voicemail. You cannot remove or reassign this speed dial. To make a speed-dial call, see Placing a CallAdditional Options, page 35. 1. Press and hold an unassigned speed-dial number for about two seconds, then press Yes. The Phone Book main screen appears. 2. Highlight a contact and press Select to assign the speed dial to the primary number.

> Speed Dials. 1. Choose 2. Highlight the assigned speed dial and press Delete. 3. Press Yes to confirm, or No to cancel. Tips

After you assign a speed dial to a contact number, a speed dial icon underneath the phone number in the contact details. and number appear

You can store up to 100 contacts in the Phone Book, but can only assign 99 speed dials because

speed dial 1 is reserved for voicemail. If you have contact information stored in another location (for example, in Microsoft Outlook or the Cisco Unified Wireless IP Phone 7920), ask your system administrator whether the file can be imported into your Phone Book. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 85 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Accessing Voice Messages When the phone displays You Have VoiceMail or a red blinking light, you can access your messages from your phone. Note Your company determines the voice message service that your phone system uses. For the most accurate and detailed information, refer to the documentation that came with your voice message service. If you want to... Then... Set up and personalize your voice message service Check for your new voice messages Listen to your voice messages or access the voice message system menu 1. Press Message or press and hold 2. Follow the voice instructions. Note

. If you changed the left softkey on the main phone screen to Phone Book, the Message softkey will not be available. For more information, see Customizing the Phone Screen, page 72. Look at your phone for these indicators:

A red blinking light

A text message, You Have VoiceMail

A flashing message waiting icon next to your directory number in Line View. 1. Press Message or press and hold 2. Enter your voice message password. 3. Follow the voice instructions to listen to your messages. Note

. If you changed the left softkey on the main phone screen to Phone Book, the Message softkey will not be available. For more information, see Customizing the Phone Screen, page 72. Send a call to your voice message system Press iDivert. The iDivert feature automatically transfers a call (including a ringing or held call) to your voice message system. Callers will hear your voice message greeting and can leave you a message. 86 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Accessing Your User Options Web Pages Accessing Your User Options Web Pages Your wireless IP phone is a network device that can share information with other network devices in your company, including your personal computer. You can use your computer to log in to your Cisco Unified Communications Manager User Options web pages, where you can control features, settings, and services for your wireless IP phone. This section includes information for:

Cisco Unified CallManager Release 4.3 and Later User Options Web Pages, page 87

Cisco Unified Communications Manager Release 5.1 and Later User Options Web Pages, page 89 Cisco Unified CallManager Release 4.3 and Later User Options Web Pages This section describes how to access your User Options web pages and how to subscribe to phone services when you are connected to a Cisco Unified CallManager 4.3 or later system. For more details about the features you can configure and the phone services to which you can subscribe, refer to Customizing Your Cisco IP Phone on the Web at the following URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guide_list.html Use these sections for more information about:

Logging In to the User Options Web Pages, page 87

Subscribing to Phone Services, page 88 Logging In to the User Options Web Pages This section describes how to log in and select a phone device for Cisco Unified CallManager Release 4.1 or later User Options web pages. If you want to... Log in to your User Options web pages Then do this... 1. Obtain a User Options URL, user ID, and default password from your system administrator. 2. Open a web browser on your computer, enter the URL, and log on. The Cisco Unified CallManager User Options main web page displays. Select a device after logging in 1. From the general menu, select your device type (phone model) in the Select a device drop-down list. The context-sensitive menu appears with options appropriate for the wireless IP phone. 2. Make changes to the options for your wireless IP phone. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 87 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Tips for Navigating the User Options Web Pages

Select your device from the menu page to see all of your options.

Click Update to apply and save your changes.

Click Return to the Menu to get back to the context-sensitive menu.

Click Log Off to exit the User pages. Subscribing to Phone Services Before you can access subscription phone services on your phone, you need to subscribe to them by using your computer to access the User Options web pages. See Accessing Your User Options Web Pages, page 89. Phone services can include:

Web-based information, such as stock quotes, movie listings, and weather reports

Network data, such as corporate calendars and searchable directories

Phone features, such as the Fast Dial service and a Personal Address Book Refer to the following table for more information. If you want to... Subscribe to a service Then, do this after you log in and select your device type... 1. From the main menu, choose Configure your Cisco IP Phone Services. 2. Select a service from the Available Services drop-down list and click Continue. Change or end subscriptions Access a service on your phone Learn how to use phone services 3. Enter more information upon request (such as a zip code or PIN). 4. Click Subscribe. 1. From the main menu, choose Configure your Cisco IP Phone Services. 2. Click a service in the Your Subscribed Services panel. 3. Click Update after making changes, or click Unsubscribe. 1. Choose 2. Select the service that you want. Refer to Customizing Your Cisco IP Phone on the Web:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guid e_list.html

(Services) > (Service Name). 88 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Accessing Your User Options Web Pages Cisco Unified Communications Manager Release 5.1 and Later User Options Web Pages This section describes how to access your User Options web pages and how to subscribe to phone services when you are connected to a Cisco Unified Communications Manager 5.1 or later system. Use these sections for more details about accessing the User Options web pages and configuring features and subscribing to phone services:

Accessing Your User Options Web Pages, page 89

Configuring Features and Services on the Web, page 90 Accessing Your User Options Web Pages This section describes how to log in and select a phone device for Cisco Unified Communications Manager Release 5.1 or later User Options web pages. If you want to... Log in to your User Options web pages Then do this... 1. Obtain a User Options URL, user ID, and default password from your system administrator. 2. Open a web browser on your computer, enter the URL, and log on. 3. If prompted to accept security settings, click Yes or Install Certificate. The Cisco Unified Communications Manager User Options main web page displays. From this page, you can choose User Options to access User Settings, Directory features, a Personal Address Book, and Fast Dials. To access phone-specific options, select a device (see below). 1. After you have logged in to your User Options web pages, choose 2. User Options > Device. The Device Configuration page displays. If you have multiple devices assigned to you, verify that the appropriate device (phone model or Extension Mobility profile) is selected. If necessary, choose another device from the Name drop-down menu. Choose User Options drop-down button to access these features:

User Settings

Directory

Personal Address Book

Fast Dials Select a device after logging in Configure user features Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 89 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Configure phone settings Choose toolbar buttons to access these phone-specific options:

Then do this...

Line settings

Speed dials

Phone services

Service URL Choose User Options > Device from any page to verify that you are configuring the correct device or to change devices. Return to the Device Configuration page Tip Use the Device Configuration page to access all of the configuration options available for your phone

(other pages might not provide access to all options). Configuring Features and Services on the Web These topics describe how to configure features and services from your User Options web pages after logging in. See Accessing Your User Options Web Pages, page 89.

Setting Up Speed Dials on the Web, page 90

Using Personal Directory on the Web, page 91

Setting Up Phone Services on the Web, page 94

Controlling User Settings on the Web, page 95

Controlling Line Settings on the Web, page 96

Using Cisco WebDialer, page 97 Setting Up Speed Dials on the Web Depending on configuration, your phone can support several speed-dial features that are set up from the web:

Line View Speed Dials

Abbreviated Dials

Fast Dials 90 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Accessing Your User Options Web Pages Note For help using speed-dial features, see Speed Dialing, page 52. If you want to... Set up Line View speed-dial numbers Then do this after you log in... 1. Select the name for the Cisco Unified Wireless IP Phone 7925G device. 2. Click Speed Dials. 3. Enter a phone number as you would dial it. 4. Enter a label for the speed-dial number that is 11 characters or less. 5. Click Save Note If you have speed dials configured in your Line View, the speed-dial label appears next to the icon. Set up Abbreviated Dials 1. Select the name for the Cisco Unified Wireless IP Phone 7925G device. 2. Click Speed Dials. 3. Enter a phone number as you would dial it and label for an Abbreviated Dialing code. Set up Fast Dials 4. Click Save. Note Make note of the number for the Abbreviated Dialing Code. Use this code with Options > AbbrDial to access the speed-dial number. See Configuring Fast Dials on the Web, page 92. You can also set up Fast Dials on your phone. See the Using Personal Directory on Your Phone, page 79. Tips

You can have up to six numbers appear in your Line View screen (a combination of line and speed

dial numbers). If your speed dial label contains more than 11 characters, use a shorter label because labels are shortened from the left. For example, Customer Service displays as ".....er Service". Using Personal Directory on the Web The Personal Directory feature set that you can access on your computer consists of:

A Personal Address Book (PAB)

Fast Dials

The Address Book Synchronization Tool (TABSynch) Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 91 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Note You can also access PAB and Fast Dials from your phone. See Using Personal Directory on Your Phone, page 79. Using Your Personal Address Book on the Web This section describes how to use your PAB from your User Options web pages. If you want to... Add a new PAB entry Search for a PAB entry Edit a PAB entry Delete a PAB entry Then, do this after you log in... 1. Choose User Options > Personal Address Book. 2. Click Add New. 3. Enter information for the entry. 4. Click Save. 1. Choose User Options > Personal Address Book. 2. Specify search information and click Find. Note 1. Search for a PAB entry. 2. Click a name or nickname. 3. Edit the entry as needed and click Save. 1. Search for a PAB entry. 2. Select one or more entries. 3. Click Delete Selected. To locate all entries, leave search information blank and click Find. Configuring Fast Dials on the Web This section describes how to assign Fast Dials from your User Options web pages. If you want to... Assign a Fast Dial code to a PAB entry Then, do this after you log in... 1. Create a PAB entry. See Using Your Personal Address Book on the Web, page 92. 2. Choose User Options > Fast Dials. 3. Click Add New. 4. Change the Fast Dial code, if desired. 5. Use the Search Options area to find the appropriate PAB entry. 6. Click a phone number in the Search Results area. 7. Click Save. 92 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Accessing Your User Options Web Pages If you want to... Assign a Fast Dial code to a phone number

(without using a PAB entry) Search for a Fast Dial entry Edit a Fast Dial phone number Delete a Fast Dial entry Then, do this after you log in... 1. Choose User Options > Fast Dials. 2. Click Add New. 3. Change the Fast Dial code, if desired. 4. Enter a phone number. 5. Click Save. 1. Choose User Options > Fast Dials. 2. Specify search information and click Find. 1. Choose User Options > Fast Dials. 2. Search for the Fast Dial entry that you want to edit. 3. Click a component of the entry. 4. Change the phone number. 5. Click Save. 1. Search for a Fast Dial. 2. Select one or more entries. 3. Click Delete Selected. Tips,

You can create up to 500 Fast Dial and PAB entries.

You can create a new Fast Dial entry without using a PAB entry. Such Fast Dial entries, which are labeled raw in the User Options web pages, do not display a configurable text label. Using the Address Book Synchronization Tool You can use the Address Book Synchronization tool (TABSynch) to synchronize your existing Microsoft Windows Address Book (if applicable) with your PAB. Then you can access entries from your Microsoft Windows Address Book on your wireless IP phone and User Options web pages. Your system administrator can give you access to TABSynch and provide detailed instructions. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 93 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Setting Up Phone Services on the Web Phone services can include special phone features, network data, and web-based information (such as stock quotes and movie listings). You must first subscribe to a phone service before accessing it on your phone. If you want to... Subscribe to a service Then do this after you log in... 1. Select the name for the Cisco Unified Wireless IP Phone 7925G device. 2. Click Phone Services. 3. Click Add New. 4. Choose a service from the drop-down list and click Next. 5. Change the service label and/or enter additional service information, if available (optional). Note If the label contains more than 11 characters, use a shorter name because labels are shortened from the left . For example, "Customer Service" displays as ".....er Service"

Search for services Change or end services Change a service name 6. Click Save. 1. Select a device. 2. Click Phone Services. 3. Click Find. 1. Search for services. 2. Select one or more entries. 3. Click Delete Selected. 1. Search for services. 2. Click on the service name. 3. Change the information and click Save. 94 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Accessing Your User Options Web Pages If you want to... Add a service to an available screen slot Then do this after you log in... 1. Select a device. 2. Click Service URL. Note If you do not see this option, ask your system administrator to configure a service URL button for your phone. 3. Choose a service from the Button Service drop-down list. 4. Note If you want to rename the service, edit the label fields. Your phone uses the ASCII Label field if the phone does not support double-byte character sets. 5. Click Save. 6. Click Reset to reset your phone (necessary to see the new label on your Access a service on your phone phone). Choose Note

> (Service Name). The services available on your phone depend on the phone system configuration and the services you subscribed to. Ask your system administrator for more information. Note If only one service is configured, the service opens by default. If more than one service is configured, select an option from the menu on the phone screen. Controlling User Settings on the Web User settings include your password, PIN, and language (locale) settings. Your PIN and password allow you to access different features and services. If you want to... Change your password Change your PIN Then do this after you log in... 1. Choose User Options > User Settings. 2. Note A password must be 5-127 characters. In the Browser Password area, enter information. 3. Click Save. 1. Choose User Options > User Settings. 2. Note A PIN must be 5-20 numbers. In the Phone PIN area, enter information. 3. Click Save. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 95 FCS REVIEW DRAFT - CISCO CONFIDENTIAL If you want to... Change the language (locale) for your User Options web pages Change the language (locale) for your phone screen Then do this after you log in... 1. Choose User Options > User Settings. 2. In the User Locale area, choose an item from the Locale drop-down list. 3. Click Save. 1. Go to the Device Configuration page by choosing User Options > Device. 2. Choose an item from the User Locale drop-down list. 3. Click Save. Tips

Use your PIN to log in to Cisco Extension Mobility or Personal Directory on your phone.

Use your password to log in to your User Options web pages and Cisco WebDialer on your personal computer.

For more information about these services, ask your system administrator. Controlling Line Settings on the Web Line settings affect a specific phone line (directory number) on your phone. Line settings can include call-forwarding and line labels. Note

You can set up call forwarding (for your primary phone line) directly on your phone. See Forwarding Calls to Another Number, page 43.

To learn about phone settings that you can access directly on your phone, see Changing Phone Settings, page 70. If you want to... Set up call forwarding per line Then do this after you log in... 1. Select the name for the Cisco Unified Wireless IP Phone 7925G device. 2. Click Line Settings. 3. If you have more than one directory number (line) assigned to your phone, verify that the appropriate line is selected or choose a new one. In the Incoming Call Forwarding area, choose call forwarding settings for various conditions. 4. 5. Click Save. 96 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Accessing Your User Options Web Pages If you want to... Change the voice message indicator setting per line Change or create a line text label that appears on your phone screen Then do this after you log in... 1. Select your device. 2. Click Line Settings. 3. If you have more than one directory number (line) assigned to your phone, verify that the appropriate line is selected or choose a new one. In the Message Waiting Lamp area, choose from various settings. Typically, the default message waiting setting prompts your phone to display a light and a message to indicate a new voice message. 4. Note 5. Click Save. 1. Select your device. 2. Click Line Settings. 3. 4. Note If you have more than one directory number (line) assigned to your phone, verify that the appropriate line is selected or choose a new one. In the Line Text Label area, enter a text label. If the label contains more than 11 characters, use a shorter name because labels are shortened from the left . For example, "Customer Service" displays as ".....er Service"

5. Click Save. Tip You cannot change the Ring Settings for the phone from the User Options web pages. Using Cisco WebDialer Cisco WebDialer allows you to make calls on your wireless IP phone to directory contacts by clicking items in a web browser. Your system administrator must configure this feature for you. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 97 If you want to... Use WebDialer with your User Options directory Use WebDialer with another online corporate directory

(not your User Options directory) FCS REVIEW DRAFT - CISCO CONFIDENTIAL Then... 1. Log in to your User Options web pages. See Accessing Your User Options Web Pages, page 89. 2. Choose User Options > Directory and search for a coworker. 3. Click the number that you want to dial. 4. If this is your first time using WebDialer, set up preferences and click Submit. (See the last row in this table for details.) If the Make Call page appears, click Dial. (See the last row in this table to learn how to suppress this page in the future, if desired.) The call is now placed on your phone. 5. 6. To end a call, click Hangup or disconnect from your phone. 1. Log in to a WebDialer-enabled corporate directory and search for coworkers. 2. Click the number that you want to dial. 3. When prompted, enter your user ID and password. 4. 5. If this is your first time using WebDialer, set up preferences and click Submit. (See the last row in this table for details.) If the Make Call page appears, click Dial. (See the last row in this table to learn how to suppress this page in the future, if desired.) The call is now placed on your phone. Log out of WebDialer Click the logout icon in the Make Call or Hang Up page. 6. To end a call, click Hangup or disconnect from your phone. 98 OL-16132-01 If you want to... Set up, view, or change WebDialer preferences FCS REVIEW DRAFT - CISCO CONFIDENTIAL Accessing Your User Options Web Pages Then... Access the Preferences page. The Preferences page appears the first time that you use WebDialer (after you click the number that you want to dial). To return to Preferences in the future, click the preferences icon from the Make Call or Hang Up page. The Preferences page contains the following options:

Preferred languageDetermines the language used for WebDialer settings and prompts.

Use permanent deviceIdentifies the wireless IP phone and directory number (line) that you will use to place WebDialer calls. If you have one phone with a single line, the appropriate phone and line are automatically selected. Otherwise, choose a phone and/or line. Phones are specified by host name. To display the host name on your phone, choose Network Profile > Network Configuration > Host Name.

(Settings) >

Use Extension MobilityIf selected, prompts WebDialer to use the wireless IP phone that is associated with your Extension Mobility profile

(if available).

Do not display call confirmationIf selected, prompts WebDialer to suppress the Make Call page. This page appears by default after you click a phone number in a WebDialer-enabled online directory. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 99 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Understanding Additional Configuration Options Your system administrator can configure your phone to use specific softkey templates along with special services and features, if appropriate. The table below provides an overview of some configuration options that you might want to discuss with your system administrator based on your calling needs or work environment. Note You can locate User Guides and other documents listed in this table from the following URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guide_list.html If you... Need to handle more calls on your phone line Then... Ask your system administrator to configure your line to support more calls. Need more than one phone line Need different softkeys, such as iDivert, to display when phone is ringing or in use Need more speed dial numbers Want to use one directory number for several phones Ask your system administrator to configure one or more additional directory numbers for you. Ask your system administrator to configure a new softkey template and assign it to your phone. Verify that you are using all your currently available speed dial numbers. If you need additional speed dial numbers, try using Abbreviated Dialing or subscribing to the Fast Dial service. Request a shared line. This allows you to use one number for your desk phone and your wireless IP phone, for example. For more information... Talk to your system administrator or phone support team. Talk to your system administrator or phone support team. Talk to your system administrator or phone support team. See Accessing Your User Options Web Pages, page 87. See Using a Shared Line, page 57. 100 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Understanding Additional Configuration Options If you... Share phones or office space with coworkers Answer calls frequently or handle calls on someones behalf Determine the state of a phone line associated with a speed-dial, call log, or directory listing on your phone Want to temporarily apply your phone number and settings to a shared Cisco Unified IP Phone Allow or prevent all phones with the same shared line to view call information or join a call on the shared line Then... Consider using:

Call Park to store and retrieve calls without using the transfer feature.

Call Pickup to answer calls ringing on another phone.

A shared line to view or join coworkers calls.

Cisco Extension Mobility to apply your phone number and user profile to a shared phone For more information... Ask your system administrator about these features and see the:

Tracing Suspicious Calls, page 62.

Using a Shared Line, page 57.

Using Cisco Extension Mobility, page 63. Ask your system administrator to set up the AutoAnswer feature for your phone. See Using AutoAnswer, page 69. Ask your administrator to set up the Busy Lamp Field (BLF) feature for your phone. See Using BLF to Determine a Line State, page 59. Ask your system administrator about the Cisco Extension Mobility service. See Using Cisco Extension Mobility, page 63. Ask your system administrator to set up the Privacy feature for those phones. See Preventing Others from Viewing or Joining a Shared-Line Call, page 59. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 101 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Troubleshooting Your Phone This section provides troubleshooting information for your wireless IP phone. General Troubleshooting This section provides information to help you troubleshoot general problems with your phone. For more information, see your system administrator. Symptom You cannot complete a call The main phone screen is not active The Settings menu is unresponsive Join fails Explanation One or more of the following factors might apply:

Your phone is out of the wireless network access point service area. Note When roaming with your phone, a green blinking light indicates that the phone is still within the wireless service coverage area.

You must log in to the Extension Mobility service.

You must enter a client matter code or forced authorization code after you dial a number.

Your phone has time-of-day restrictions that prevent you from using some features during certain hours of the day. One of these messages appears on the status line:

Network busyNot enough available bandwidth exists in wireless network to complete this call. Try again later.

Leaving service areaPhone is out of range of its associated access point and wireless network.

Locating network servicesPhone is searching for a wireless network access point.

Authentication failedAuthentication server did not accept the security credentials.

Configuring IPPhone is waiting for DHCP to assign an IP address. Your system administrator might have disabled Settings on your phone. Join requires multiple selected calls. Be sure that you have selected at least one call in addition to the active call, which is selected automatically. Join also requires the selected calls to be on the same line. If necessary, transfer calls to one line before joining them. 102 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Troubleshooting Your Phone Symptom The softkey that you want to use does not appear Explanation One or more of the following factors might apply:

You must press Options and scroll to reveal additional softkeys.

You must change the line state (for example, place a call or have a connected call).

Your phone is not configured to support the feature associated with that softkey. Barge fails and results in a fast busy tone One or more of the following factors might apply:

You cannot barge an encrypted call if the phone you are using is not You are disconnected from a call that you joined using Barge CallBack fails The phone shows an error message when you attempt to set up Call Forward All configured for encryption. When your barge attempt fails for this reason, your phone plays a fast busy tone.

You cannot barge a call on another Cisco Unified Wireless IP Phone. You will be disconnected from a call that you have joined using Barge if the call is put on hold, transferred, or turned into a conference call. The other party might have call forwarding enabled. Your phone may reject your attempt to set up Call Forward All directly on the phone if the target number that you enter would create a Call Forward All loop or would exceed the maximum number of links permitted in a Call Forward All chain (also known as a maximum hop count). Ask your system administrator for details. Viewing Phone Administration Data Your system administrator might ask you to access administration data on your phone for troubleshooting purposes. If you are asked to... Access network or wireless network configuration data Access status data Access phone call and voice quality information

> Device Information > Network or WLAN Then... Choose and select the configuration item that you want to view.

> Status and select the status item that Choose you want to view. Choose

> Status > Call Statistics. Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 103 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Using the Quality Reporting Tool Your system administrator may temporarily configure your phone with the Quality Reporting Tool

(QRT) to troubleshoot performance problems. You can choose Options > QRT to submit information to your system administrator. Depending on configuration, use the QRT to:

Select a general problem from a list of categories and choose reason codes Immediately report an audio problem on the current call 104 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Cisco One-Year Limited Hardware Warranty Terms Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com at the following URL:

http://www.cisco.com/en/US/docs/general/warranty/English/1Y1DEN__.html Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 105 FCS REVIEW DRAFT - CISCO CONFIDENTIAL 106 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Index A abbreviated dialing 90 accessibility 6 accessories for phone 16 ad hoc conference, See conference calls answer/send button 22 answering calls 37 application button 22 authenticated calls 60 auto keylock 75 AutoAnswer, using 69 B barge and privacy 59 and shared lines 57 using 58 battery installing 7 removing 7 safety notices 3 billing codes, dialing with 36 BLF Pickup 60 Bluetooth enabling 67 headset 65 qualified device ID 19 button answer/send 22 application 22 left softkey 22 mute 22 navigation 21, 26 power/end 21 right softkey 21 select 21 shortcuts 28 speaker 21, 65 volume 22 C cable lock for desktop charger 18 call forwarding 43 configuring from Communications Manager web page 96 call history menu options 77 viewing and dialing from 77 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 107 FCS REVIEW DRAFT - CISCO CONFIDENTIAL call logs erasing 77 viewing and dialing from 77 call park 55 call pickup 54 call waiting 38 CallBack 36 call-handling, advanced 52 call-handling, basic 33 calls answering 37 blocking 44 compared to lines 28 conference features for 45 ending 39 forwarding 43, 96 handling multiple 41 holding and resuming 39 icons for 29 multiple parties on 45 muting 40 parking 55 picking up 54 placing 33, 35 prioritizing 62 redirecting while ringing 38 secure 60 selecting 29 storing and retrieving 55 transferring 41 using DND 44 cBarge See also barge 108 using 58 Cisco Unified IP Phone documentation for 2 Cisco Unified Wireless IP Phone accessories 16 buttons and keys 20 cleaning 32 connecting 7 description of 19 feature configuration for 31, 100 healthcare environments 5 online help for 27 power supply 5 powering on 14 registering 16 regulatory domains 5 safety and performance 2 troubleshooting 102 web-based services for 87 Cisco WebDialer 97, 98 conference calls ad hoc 45 Meet-Me 46, 48 standard 45, 46 contacts assigning a speed dial 85 in Phone Book 82 searching for 84 corporate directory using 79 using from Communications Manager web page 97 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL D desktop charger cable lock 18 dialing, options for 33, 35 directory corporate, using 79 option descriptions 78 personal, using 79 using from Communications Manager web page 98 directory numbers, viewing 23 DND 44 Do Not Disturb 44 documentation, accessing 2 E editing text 15 encrypted calls 60 ending a call, options for 39 entering text 15 Extension Mobility log in 63 log out 63 using 37 F feature buttons, using 26 feature menus 26 features accessibility 6 adding additional 100 availability of 31 forwarding calls, options for 43 H handset using 65 hanging up, options for 39 headset Bluetooth 66 Bluetooth wireless 65 choosing ringer volume 70, 71 mode, using 65 ordering 17 port 21 quality 16 using 16, 65 using external devices 5 wired 65, 66 headset specifications 66 healthcare environments 5 help accessing 27 contents 27 using 27 hold and switching calls 41 and transferring 41 using 39 home screen display 25 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 109 FCS REVIEW DRAFT - CISCO CONFIDENTIAL hunt group, logging out of 56 I icon 50 icons call state 29 descriptions of 24 line state 29 signal strength 14 icons, for call states 29 indicator light blink rates 20 blinks green 14 colors 20 in service 14 left softkey setting 72 line settings, controlling on Communications Manager web page 96 line view speed dial 52 lines accessing 28 and call forwarding 96 call state icons 29 description of 28 line view icon 28 text label for 96 viewing 28 voice message indicator setting 96 locking phone 18 log out of hunt group 56 installing, Cisco Unified Wireless IP Phone 7 intercom line 50 M K keylock 28 keypad lock auto keylock feature 75 locking keypad 28 setting auto keylock 75 unlocking keypad 28, 75 keypad shortcuts 28 L LED blink rates 20 Malicious Call Identification (MCID) 62 Meet-Me conferences 46, 48 menu accessing items 27 accessing main menus 26 menus, using 26 missed calls, records of 77 MLPP, using 62 Multilevel Precedence and Preemption

(MLPP) 62 multiple calls, handling 41 mute button 22 mute, using 40 110 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL N navigation button 21, 26 network configuration data, locating 103 network profile locked 76 viewing 76 O online help, using 27 P PAB dialing from 36 using from web page 92 password changing EAP 76 network EAP 15 setting 15 password, changing 95 Personal Address Book, see PAB phone handset mode 65 lock set 18 speaker mode 65 Phone Book, using 82 phone buttons description 20 phone lines description of 28 viewing 23 phone screen active call 29 changing display brightness 72 changing display timeout 72 changing language 72 changing LED indication 72 cleaning 32 feature descriptions 23 features of 23 icons 24 menus 26 phone services configuring 90 phone status line icons 24 pickup groups 54 PIN, changing 95 placed calls, records of 77 placing calls, options for 33, 35 power outage 5 power supply 5 power/end button 21 powering on 14 prioritizing calls 62 privacy and shared lines 57 using 59 push to talk accessing 64 button 64 using 64 Q Quality Reporting Tool (QRT), using 104 Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 111 FCS REVIEW DRAFT - CISCO CONFIDENTIAL R received calls, records of 77 redial 33 regulatory domains 5 remote-in-use for shared lines 57 resume, using 39 ring pattern change setting 71 changing with volume button 28 ring tones changing 70, 71 choosing per line 70, 71 ringer volume 70, 71 S safety and performance 2 secure calls 60 security levels of 61 making and receiving secure calls 60 verifying non-secure calls 61 select button description 21 using 27 selecting calls 29 services, subscribing to 94 shared lines and In Use Remote message 57 description of 57 with barge 58 with privacy 59 signal strength 14 softkey buttons labels for 25 using 25 speaker button 21 speaker icon 65 speakerphone mode, using 65 special characters, accessing 16, 21, 22 speed dial assigning to Phone Book contact 85 hot key 52 line view 52 line view labels 90 making a call using a hot key 35 options 52 setting up from the web 91 using FastDial 53 speed-dial hot key 52 status data, locating 103 status line, viewing 25 subscriptions, for phone services 94 suspicious calls, tracing 62 switching calls 41 T TABSynch 93 TAPS, using 16 text editing 15 entering 15 special characters 16, 21, 22 112 OL-16132-01 FCS REVIEW DRAFT - CISCO CONFIDENTIAL Tool for Auto-Registered Phones Support 16 transferring, options for 41 troubleshooting, data for 102 accessing 86 indicator 86 shortcut 28 U User Options web pages Cisco Unified CallManager accessing and using 87 subscribing to phone services 88 Cisco Unified Communications Manager accessing and using 89 subscribing to phone services with 94 Communications Manager voice quality data, locating 103 volume adjusting 70, 71 adjusting during call 66 preserving 66 volume button description 22 using 28 W Address Book Synchronization Tool 93 device configuration page 89 warnings 2 warranty configuring features and services 90 Fast Dials, configuring from web page 92 language (locale) settings 95 line view speed dial, configuring 90 password, changing 95 Personal Directory, using from web page 91 PIN, changing 95 using a speed-dial hot key 35 description of terms 105 hardware 105 WebDialer 98 wired headset icon 65 port 65 using 65 wireless headset 66 using 65 wireless network data, locating 103 V vibration mode icon 28 setting 28 voice message indicator changing setting 96 voice messages Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 113 FCS REVIEW DRAFT - CISCO CONFIDENTIAL 114 OL-16132-01 Americas Headquarters Cisco Systems, Inc. San Jose, CA Asia Pacific Headquarters Cisco Systems (USA) Pte. Ltd. Singapore Europe Headquarters Cisco Systems International BV Amsterdam, The Netherlands Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices. CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0809R) 2008 Cisco Systems, Inc. All rights reserved. The Java logo is a trademark or registered trademark of Sun Microsystems, Inc. in the U.S. or other countries. The Bluetooth word mark and logo are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Cisco Systems, Inc., is under license. OL-16132-01