FCC ID: LDKDX800956 Desktop Telepresence Device

1 EFT Draft 1Cisco ConfidentialDo Not Distribute Cisco DX80 User Guide D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. 2 Contents Whats in this guide All entries in the table of contents are clickable hyperlinks that will take you to the corresponding article. To go between chapters, you may also click on any of the icons in the sidebar. Introduction Introduction ........................................................................... 4 Best Practice ........................................................................ 4 Introduction ........................................................................... 5 Tour the DX80 ..................................................................... 5 Set Up Your Phone for the First Time ................................. 6 Security ................................................................................ 7 Set a PIN Code or Password to Restrict Access................ 7 If You Forget Your PIN Code or Password .......................... 8 Lock and Unlock Screen .................................................... 9 Set or Change Screen-Lock Timeout ...............................10 Calling Tasks Common Call Tasks .............................................................12 Answer Call .......................................................................12 Disconnect Call .................................................................13 Hold and Resume ..............................................................14 Place Call ...........................................................................15 Place Call Using Contacts or Recents ...............................16 Place Call Using Speed Dials ............................................17 Video Call Basics ...............................................................18 Activating Selfview ............................................................19 Visual Voicemail .................................................................. 20 Send a Voicemail .............................................................. 20 Listen to a Voicemail ..........................................................21 Reply to a Voicemail ......................................................... 22 Forward a Voicemail ......................................................... 23 Delete a Voicemail ............................................................ 24 Call Park ............................................................................. 25 Store and Retrieve Active Call with Call Park ................... 25 Call Transfer ........................................................................ 26 Transfer a Call ................................................................... 26 Ad Hoc Conference ............................................................ 27 Create Conference ........................................................... 27 Meet Me Conference ......................................................... 28 Start or Join a Meet Me Conference ................................ 28 WebEx Meetings Start a Scheduled WebEx Meeting .....................................31 Contacts Contacts ............................................................................. 33 Make Someone a Contact From Call History ................... 33 Make Someone a Favorite ................................................ 34 Allocating Numbers to Speed Dial ................................... 35 Camera Setting the Camera Exposure Level ................................... 37 Settings Gain Access to the Settings ............................................... 39 D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 3 EFT Draft 1Cisco ConfidentialDo Not Distribute i Introduction D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. 4 Introduction Best Practice A successful video conference provides a face-to-face meeting, even if the participants are miles or continents apart. Keep in mind that it still is a meeting normal etiquette and dress code apply even here. General Consider setting the unit to Automatic Answer, but mute the microphone for privacy reasons, if possible. Do not forget to rehearse the noble art of operating a video system to the extent needed. In the meeting room Make sure that you do not experience obstacles blocking the view to the microphone at all times. Noise sources like computers placed on the table should always be placed away from the microphone of your unit. The noise from such sources is often perceived as surprisingly loud by the remote participants. Pay attention to the background your system will provide to the remote participants. If the camera captures the corridor outside your office, people passing by may distract your remote participants. This applies as well to curtains with a distinct texture pattern and, in particular, to curtains moving due to draught in the room. If you are going to share content some of the participants will normally make use of duo video. That implies the use of two video streams, one showing the presentation and the other showing the presenteror the group of presenters. Smaller systems may force you to choose between showing the presentation or the presenter. For duo video some attention is needed. Duo video is sometimes shown sideby side with half the screen showing the presentation and the other half showing the presenter. Provide the impression that you seem to look towards the presentation instead of the impression that you sit with your back towards it, when all is viewed on the remote monitor. If in doubt, look straight into the camera to avoid this situation. Other Tips Brightness control To adjust brightness, colors or other settings of your system, use the touch pad. Adjust the monitor to suit the conditions of the conference room. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 5 Introduction Tour the DX80 About Operating Modes Your DX80 may operate in one of two modes; Phone Only Mode or Standard Mode. In Standard Mode the DX80 acts as an Android tablet. Operating modes are set up by your Administrator. Phone Only Mode: Provides access to the following functions:

Place calls Access your list of Contacts Display the list of Recent calls Display any Voice Mail (Messages) View PC (if applicable) Display the Settings menu

(icon in upper right corner). Standard Mode: Requires that you start the Phone App before you can use the system as a phone. To start the Phone App tap the Phone

) in the left corner of the black icon (

bottom bar. The Phone icon is shown in Standard Mode only. The usual Android navigation buttons

(Back, Home and Recently Used Apps) will be shown when the Phone App is running. Note! The descriptions provided in this document assume that the system either is in Phone Only Mode or that the Phone Application is running. Camera with privacy shutter, turn counter-clockwise to shut and clockwise to open Microphone mute button, loudspeaker volume controls and USB socket on the right side of the unit Power On/Off Loudspeaker Microphone in each leg. Power Supply USB computer connection HDMI computer connection HDMI external monitor connection SD card slot and Kensington lock USB ports Connect your computer LAN here to let your DX80 and computer share a common LAN connection LAN connection. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute About Setup Provided that self-provisioning is allowed in your organization, your DX80 will automatically prompt you to enter the usernames and passwords needed for the appropriate accounts. Note! This wizard will not appear for units running in Phone Only Mode. After you have run this wizard you will, in most cases, be prompted to provide a PIN code or password to restrict access to your unit. This is described on the following page. If you for some reason should want to run this wizard at a later stage, you must perform a Factory Reset. All user specified settings will then be erased and you will be able to start all over again. 6 Introduction Set Up Your Phone for the First Time When you start the system for the first time, you will be invited to run a wizard. Just tap Get started, as outlined. At first, you will be prompted to log into WebEx. Enter your WebEx username and tap Next. You will now be prompted sign in to WebEx Messenger or CUCM IM and Presence. Tap the one that applies to you. Enter your Username and tap Continue. You will then be prompted to enter username and password for your Voicemail. To let your contacts and calendar get synced up, you need to provide your Email address and the corresponding password. Finally, it is time to make yourself at home. You will now be invited to put your favorite apps as shortcuts on your screen. And then you are done!

D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 7 Security Set a PIN Code or Password to Restrict Access About PIN and Password The system will normally prompt you to enter a PIN code or password to prevent unrestricted access to your system. The example shown here assumes that you opt for a PIN code rather than a password, but the procedure is the same in both cases, apart from the fact that a password typically consists of a mixture of alphanumerical characters. Tap Screen lock as outlined. Tap PIN or Password. Selecting None (if possible) will create a vulnerable system and cannot be recommended. Using PIN as example, the system will prompt you to enter a four digit PIN code. Tap Continue when done. In order to prevent an unintended lock-out of yourself, you will now be prompted to confirm your PIN code. Enter the PIN code, followed by tapping OK. Tap Home when done. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute Reset PIN or Password If you happen to forget your PIN code or password, you may have the system reset the PIN code or password for you. Once it has been reset, you may enter a new PIN code or password by following the procedure given on the previous page. To do this successfully, you must log in using either your Cisco User account or your Google account. The example shown here uses the Cisco User account as example, but the procedure is the same if you opt for using the Google account instead. Emergency calls. Note that locked screens still let you place emergency calls. Tap the ? in the upper right corner. 8 Security If You Forget Your PIN Code or Password If you realize that you have forgotten you PIN code or password, tap ? in the upper right corner, as outlined. Tap Forgot PIN. You will now need to log in with your credentials. Tap Cisco User or Google. Enter username and password. Your PIN code / password will now be reset and a new be entered, see the previous page for more on that. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 9 Security Lock and Unlock Screen About Locking Screen Screen locking is a way to block unauthorized access to your system. Make sure your screen is locked whenever you leave your system for a while. You may set up the screenlock to be activated automatically after a certain time of inactivity. This is described on the following page. Emergency calls. Note that locked screens still let you place emergency calls. Tap the ? in the upper right corner. To lock the screen, press the Power button briefly To unlock the screen enter your PIN code or password. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 10 Security Set or Change Screen-Lock Timeout Tap in the lower right corner, as outlined and then tap the Settings icon, as outlined. Tap Security and then tap Automatically lock. Select a timeout value. Tap Home to exit the Settings. Setting Timeout Screen locking is a way to block unauthorized access to your system. Make sure your screen is locked whenever you leave your system for a while. You may set up the screenlock to be activated automatically after a certain time of inactivity. Emergency calls. Note that locked screens still let you place emergency calls. Tap the ? in the upper right corner. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 11 EFT Draft 1Cisco ConfidentialDo Not Distribute Calling Tasks D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. 12 Common Call Tasks Answer Call Tap Answer to accept the call and Decline to reject it. A Few In-Call Tips If parties on a call hear a beep, the call may be monitored or recorded. Contact your system administrator for more information. If you work in a contact center or similar environment, you can create, update, and delete your own prerecorded greeting that plays automatically if Agent Greeting is configured on your phone. For more information, contact your system administrator. A Call Chaperone user cannot answer an incoming call while calls are chaperoned. Already in a call? If you are already in a call when someone calls you, the current call will be put on hold if you answer the new call. If you decline the new call, things will not change. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 13 Common Call Tasks Disconnect Call More Than One Call?

If you have more than one call active and you want to hang up one of the calls, but preserve another call on the same line, you may need to remove the call that you want to end from hold first. To disconnect yourself from an ongoing call, tap End. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 14 Common Call Tasks Hold and Resume In a call, tap Hold as outlined. Your screen will now look as shown, and music will normally be played while the call remains on hold. To resume the call, tap Resume, as outlined. About Hold and Resume You can hold and resume calls. This can be used to call someone while a call already is active. When you put a call on hold, the Hold icon appears on the right in the call information area. With a shared line, when another phone places a call on hold, the phone displays the Remote Hold icon. If the Hold Reversion feature is enabled for your phone, a call that you put on hold reverts to ringing after a certain time. The reverting call remains on hold until you resume it or until Hold Reversion times out. Your phone indicates the presence of a reverting call by the following actions:

Alerts you at intervals with a single ring (or flash or beep, depending on your phone line setting). Briefly displays a Hold Reversion message in the status bar at the bottom of the phone screen. Displays the animated Hold Reversion icon next to the caller ID for the held call. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 15 Common Call Tasks Place Call Tap the Call icon, as outlined, if needed. To have the system show search results while dialing, activate Predictive Dialing in the Settings menu accessed from here. About Placing Calls You may call someone who is not listed in your list of contacts by keying in their name, address or number using the virtual keyboard of the screen. Anyone you have previously called will appear in the Recents list (until you clear that list). Any matches found in the Recents list or in the Contacts list will appear as you type, provided that you have set up the system to do so (see the left illustration for more on this). Use the virtual keyboard to enter name, number or address and then tap the green Call button. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 16 Common Call Tasks Place Call Using Contacts or Recents About Using Lists Tap the Call icon, as outlined, if needed. To locate an entry in the Contacts or Recents list, scroll through that list in the same way as on a smart phone

(i.e. by swiping your finger vertically in the required direction). Either tap Recents or Contacts and scroll the list vertically Tap the green Call button to place the call. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 17 Common Call Tasks Place Call Using Speed Dials About Speed Dial When you have defined Speed Dials

(see the section Contacts for more), these will appear in the left column of your Call menu. Tap a Speed Dial entry to place a call using the feature. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 18 Common Call Tasks Video Call Basics About Video Calls Video calls should be regarded as an extension of regular phone calls. You may adjust some camera settings, such as exposure and bandwidth allocated to your call. This is discussed in the Settings section. Place a call, as outlined. Wait for the call to connect. You are now in a video call if the called system permits it. If you want to see what others see from your system tap the Selfview icon (marked by a blue circle in the upper right corner). Tap End to terminate the call. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 19 Common Call Tasks Activating Selfview In a call:

About Selfview The selfview shows what others see from your system, i.e. your outgoing video. Note that you will see a mirror image of the outgoing video. The selfview image may be moved about your screen. To do this, place your finger on the selfview image and drag it to the new position. In a call, tap the Camera icon, as outlined. The selfview image will appear as a picture in picture, as shown. Tap the icon again to remove the selfview image. Outside a call:

Inside the Call menu, tap More (...) to show the drop-down menu. Tap Selfview. The selfview will be full screen. Tap Remove

(

) (not shown) to stop showing the selfview. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 20 Visual Voicemail Send a Voicemail About Visual Voicemail The Visual Voicemail tool lets you manage your voice messages. Tap Messages in the left column, then tap More (...) in the upper right corner, as outlined. Select New Message from the drop-down list. Tap Record. When your message is complete, tap Done. You may record again, if needed. Otherwise, enter the name, number or address of the receiver. Once completed, tap Send, as outlined. The display will now return to display a list of the Messages. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 21 Visual Voicemail Listen to a Voicemail About Visual Voicemail The Visual Voicemail tool lets you manage your voice messages. Tap Messages, as outlined. New Voicemails are indicated by the red square in the left column. If there are more than one, select the one you are going to listen to. Tap Play (

) to listen to the voice message. Tap Pause, as outlined to temporarily halt the playback. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 22 Visual Voicemail Reply to a Voicemail About Visual Voicemail The Visual Voicemail tool lets you manage your voice messages. If a Voicemail has been sent to a multitude of recipients, you may use the Reply All feature to reach them all with a single reply. Tap Messages, as outlined and select a voicemail. Tap Reply (

) or Reply All (

). Tap Record. Tap Done when the recording has been made. Re-record, if needed. Tap Send. Tap Done. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 23 Visual Voicemail Forward a Voicemail About Visual Voicemail The Visual Voicemail tool lets you manage your voice messages. When you forward a message, you may also include your own message. Tap Messages, as outlined and select a voicemail. Tap Forward (

). Record a message, if needed. Tap Done when the recording has been made. Select the recipient, as outlined. You may also re-record, if needed. Tap Send. Tap Done to finish the forwarding. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 24 Visual Voicemail Delete a Voicemail Delete a Voicemail from the list:

About Visual Voicemail The Visual Voicemail tool lets you manage your voice messages. Messages can either be deleted directly from the list of messages or while you are inside the Playback menu. Tap Messages and select the message to be deleted, as outlined. Tap Recycle Bin (

corner, as outlined.

) in the upper right The Voicemail has now been deleted. Delete a Voicemail from the playback panel:

Tap Recycle Bin (

delete the Voicemail.

), as outlined to D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 25 Call Park Store and Retrieve Active Call with Call Park To retrieve the call from any other phone, just call that number. About Call Park You park a call when you want to store the call so that you or someone else can retrieve it from another phone in the Cisco Unified Communications Manager system (for example, a phone at a coworkers desk or in a conference room). In a call tap Park, as outlined. Make a note of the number needed to retrieve the parked call. If your Administrator has created a fixed number for this, use that number, which you may want to have stored as a speed dial number. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 26 Call Transfer Transfer a Call About Call Transfer Transfer redirects a call. The target is the name, number or address (URI) to which you want to transfer the call. Note that you cannot use the transfer function to redirect a call that is on hold. Tap Resume to remove the call from hold before transferring it. In a call, tap Transfer, as outlined. Enter the name, number or address (URI) of the recipient. Tap the green Call icon. Talk to the new recipient, if necessary. Then tap Transfer. The call will now be transferred. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 27 Ad Hoc Conference Create Conference In a call, tap Add, as outlined. Call another in the usual way. The one you were in call with will now be put on hold, while the new recipient is called. Once, the new recipient answers, tap Merge to generate the conference. Tap End to terminate the conference. About Create Conference To expand an ongoing call into a conference, just add participants. These participants can be added by dialing their number, name or address; or by using the list of Contacts; or any mixture of these two methods. If you tap the information icon (

appearing in the upper right corner during the conference, you will gain access to the list of participants.

) Participants are listed in the order in which they join the conference with the most recent additions at the top. Tip: To remove any conference participant, highlight the participant and tap End Call. You can remove participants only if you initiated the conference call. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 28 Meet Me Conference Start or Join a Meet Me Conference About Meet Me Conference Start a Meet Me Conference:

Meet Me conferencing enables you to start or join a conference by calling the conference number as opposed to call specific recipients one by one to create a conference. If you call a secure Meet Me conference number from a nonsecure phone, your phone displays the message Device Not Authorized. A Meet Me conference ends when all participants hang up. If the conference initiator disconnects, the conference call continues until all participants hang up. Note that the participants cannot join the conference until the initiator starts the conference. Tap Call, as outlined. This will open the Call menu Tap Meet Me, as outlined. Tap the green Call button. You have initiated a Meet Me conference. Join a Meet Me Conference Started by Someone Else:

Dial the Meet Me conference number that the conference initiator provides. If you hear a busy tone, the conference initiator has not joined the conference. Wait a minute and then try your call again. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 29 S harin g of co nte nt is n ot su p p orte d in this versio n Share Content D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 30 EFT Draft 1Cisco ConfidentialDo Not Distribute Your video system may be connected to a management system capable of scheduling video meetings for you. Any meetings scheduled will then appear in a List of Meetings on your Touch device. WebEx Meetings D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. 31 WebEx Meetings Start a Scheduled WebEx Meeting Tap WebEx, as outlined. The list of upcoming scheduled meetings will now appear in the left column. When it is time to join, tap Start, as outlined. The system will now connect you to the conference. If you want to activate your video, tap Start my video, as outlined. If your selfview blocks important real estate on the screen, tap and hold and then move the selfview. Meeting List Basics Cisco WebEx is a standalone application, but also integrates into the Calendar, Phone, Chat, and Contacts applications. During a Cisco WebEx meeting, participants can join the audio conference, see who is in the meeting, view shared presentations, and chat with everyone or privately. A pop-up at the bottom of the screen identifies the current speaker. Schedule a New WebEx Meeting You may schedule a new WebEx meeting. You do this by means of the Calendar application. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 32 EFT Draft 1Cisco ConfidentialDo Not Distribute Contacts consists of three parts;

a Directory, which typically is your corporate phone book; Recents which is a list of recent calls and finally Favorites, which is your personalized list of people you call frequently or otherwise need to get easy access to. Contacts D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. 33 Contacts Make Someone a Contact From Call History About Contacts Select the person to become a contact in Recents, as outlined Tap More (...) in the upper right corner to show the drop-down menu and then tap Add to Contacts. Tap OK to confirm that you want to add the person to the list of Contacts. The Contacts serves as your phone book. You may also turn someone into a Favorite to make them appear on the Home screen of the phone app. You may now either associate the person with an entry already existing in your list of contacts (e.g. mobile phone number in addition to office phone number). This you do by clicking on that contact. Otherwise, to create a completely new contact, tap Create new contact. You may now specify what this entry represents (e.g. Home, mobile etc.) Once done tap OK. Youre done. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 34 Contacts Make Someone a Favorite About Contacts The Contacts serves as your phone book. You may also turn someone into a Favorite to make them appear on the Home screen of the phone app. Tap Call, as outlined. Select Recents or Contacts (left column) and then select the avatar to turn into a Favorite. Tap the little * in the upper right corner to turn this entry into a Favorite. The color of the asterisk will change from gray to yellow. To demote someone from the list of Favorites, tap the asterisk again. The color of the asterisk will then change back from yellow to gray. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute About Speed Dial Speed Dial is a convenient shortcut to contacts that you use often. You allocate a speed dial code (typically a number) to the entry and use that to call that person. How to utilize already allocated speed dial settings is shown in the chapter Calling Tasks. 35 Contacts Allocating Numbers to Speed Dial Tap Calls to invoke the display shown here and then tap More (...), followed by Add a speed dial in the drop-down menu. You will now be prompted to log into the system using you username and password. Authentication will then take place. Tap More (...) again. Tap Add a speed dial in the drop-down menu. Locate whom to allocate to a speed dial. Once located, specify the Speed dial code to be associated with this person. In this example 1 is used as speed dial code. Tap OK to leave menu putting changes into effect. The speed dial allocation and the corresponding code is indicated as shown. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 36 EFT Draft 1Cisco ConfidentialDo Not Distribute Camera D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. 37 Camera Setting the Camera Exposure Level About Camera Settings You can set the cameras exposure level in the Settings menu associat-

ed with the Call window. You can adjust the cameras exposure level by means of the Settings menu accessed from here. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 38 Settings D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute 39 Settings Gain Access to the Settings About Settings There are several types of Settings available with your DX80. There are System Settings, like those shown here, and there are context sensitive settings applying to your current task. Care must be taken when altering the System Settings to avoid that the system stops working. If in doubt, contact your video support team. D1510401 User Guide Cisco Collaborate Desk DX80Produced: April 2014, All contents 2014 Cisco Systems, Inc. All rights reserved. EFT Draft 1Cisco ConfidentialDo Not Distribute Americas Headquarters Cisco Systems, Inc. San Jose, CA Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices. Asia Pacific Headquarters Cisco Systems (USA) Pte. Ltd. Singapore Europe Headquarters Cisco Systems International BV Amsterdam, The Netherlands Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Ciscos trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Contents Regulatory Compliance and Safety Information for Cisco DX Series This document provides international agency compliance, safety, and statutory information for Cisco DX Series collaboration desk endpoints. This document contains the following sections:

Translated Safety Warnings, page 2

Japanese Electric Appliance and Radio Laws, page 26

Cell Phone Interference Caution, page 26

Using External Devices with Your Cisco DX Series Collaboration Desk Endpoint, page 27

European Directives, page 27

Compliance and Safety Information, page 30

Obtaining Documentation and Submitting a Service Request, page 39 Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Translated Safety Warnings This section repeats in multiple languages the basic warnings appropriate for Cisco DX Series collaboration desk endpoints. Statement 1071Warning Definition Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Waarschuwing BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES Varoitus TRKEIT TURVALLISUUSOHJEITA Tm varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin ksittelet laitteistoa, huomioi shkpiirien ksittelemiseen liittyvt riskit ja tutustu onnettomuuksien yleisiin ehkisytapoihin. Turvallisuusvaroitusten knnkset lytyvt laitteen mukana toimitettujen knnettyjen turvallisuusvaroitusten joukosta varoitusten lopussa nkyvien lausuntonumeroiden avulla. SILYT NM OHJEET Attention IMPORTANTES INFORMATIONS DE SCURIT Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraner des blessures ou des dommages corporels. Avant de travailler sur un quipement, soyez conscient des dangers lis aux circuits lectriques et familiarisez-vous avec les procdures couramment utilises pour viter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de scurit traduites qui accompagnent cet appareil, rfrez-vous au numro de l'instruction situ la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS Regulatory Compliance and Safety Information for Cisco DX Series 2 OL-28934-01 Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen fhren kann. Machen Sie sich vor der Arbeit mit Gerten mit den Gefahren elektrischer Schaltungen und den blichen Verfahren zur Vorbeugung vor Unfllen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen bersetzung in den bersetzten Sicherheitshinweisen, die zusammen mit diesem Gert ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. Avvertenza IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI Advarsel VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan fre til skade p person. Fr du begynner arbeide med noe av utstyret, m du vre oppmerksom p farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for forhindre ulykker. Bruk nummeret i slutten av hver advarsel for finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE P DISSE INSTRUKSJONENE Aviso INSTRUES IMPORTANTES DE SEGURANA Este smbolo de aviso significa perigo. Voc est em uma situao que poder ser causadora de leses corporais. Antes de iniciar a utilizao de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos eltricos e familiarize-se com as prticas habituais de preveno de acidentes. Utilize o nmero da instruo fornecido ao final de cada aviso para localizar sua traduo nos avisos de segurana traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUES Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este smbolo de aviso indica peligro. Existe riesgo para su integridad fsica. Antes de manipular cualquier equipo, considere los riesgos de la corriente elctrica y familiarcese con los procedimientos estndar de prevencin de accidentes. Al final de cada advertencia encontrar el nmero que le ayudar a encontrar el texto traducido en el apartado de traducciones que acompaa a este dispositivo. GUARDE ESTAS INSTRUCCIONES OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 3 Varning!

VIKTIGA SKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utfr arbete p ngon utrustning mste du vara medveten om farorna med elkretsar och knna till vanliga frfaranden fr att frebygga olyckor. Anvnd det nummer som finns i slutet av varje varning fr att hitta dess versttning i de versatta skerhetsvarningar som medfljer denna anordning. SPARA DESSA ANVISNINGAR Regulatory Compliance and Safety Information for Cisco DX Series 4 OL-28934-01 Aviso INSTRUES IMPORTANTES DE SEGURANA Este smbolo de aviso significa perigo. Voc se encontra em uma situao em que h risco de leses corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos eltricos e familiarize-se com as prticas padro de preveno de acidentes. Use o nmero da declarao fornecido ao final de cada aviso para localizar sua traduo nos avisos de segurana traduzidos que acompanham o dispositivo. GUARDE ESTAS INSTRUES Advarsel VIGTIGE SIKKERHEDSANVISNINGER Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Fr du begynder arbejde p udstyr, skal du vre opmrksom p de involverede risici, der er ved elektriske kredslb, og du skal stte dig ind i standardprocedurer til undgelse af ulykker. Brug erklringsnummeret efter hver advarsel for at finde oversttelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 5 Regulatory Compliance and Safety Information for Cisco DX Series 6 OL-28934-01 Statement 19TN Power Warning Warning The device is designed to work with TN power systems. Waarschuwing Het apparaat is ontworpen om te functioneren met TN energiesystemen. Varoitus Koje on suunniteltu toimimaan TN-shkvoimajrjestelmien yhteydess. Attention Ce dispositif a t conu pour fonctionner avec des systmes d'alimentation TN. Warnung Das Gert ist fr die Verwendung mit TN-Stromsystemen ausgelegt. Avvertenza Il dispositivo stato progettato per luso con sistemi di alimentazione TN. Advarsel Utstyret er utfomet til bruk med TN-strmsystemer. Aviso O dispositivo foi criado para operar com sistemas de corrente TN. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 7 Advertencia!

El equipo est diseado para trabajar con sistemas de alimentacin tipo TN. Varning!

Enheten r konstruerad fr anvndning tillsammans med elkraftssystem av TN-typ. Statement 331Power Supply Installation Warning Warning The power supply must be placed indoors. Waarschuwing De stroomtoevoer moet binnen worden geplaatst. Varoitus Tehonlhde on sijoitettava sistiloihin. Attention Le bloc dalimentation lectrique doit tre plac lintrieur. Warnung Die Stromversorgungsquelle darf nicht im Freien aufgestellt werden. Avvertenza Lalimentatore deve essere posto in un luogo interno. Advarsel Strmkilden skal vre plassert innendrs. Aviso A fonte de alimentao deve ser instalada no interior. Advertencia!

El suministro de energa debe estar ubicado en un lugar cubierto y no al aire libre. Varning!

Strmkllan mste vara placerad inomhus. Regulatory Compliance and Safety Information for Cisco DX Series 8 OL-28934-01 Statement 353This Product Must be Connected Warning This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353 Waarschuwing Dit product moet worden verbonden met een stroomvoorziening die compatibel is met PoE

(power-over-ethernet) IEEE 802.3af of een beperkte stroomvoorziening die compatibel is met IEC60950. Varoitus Tm tuote on liitettv PoE (power-over-ethernet) IEEE 802.3af -yhteensopivaan virtalhteeseen tai IEC60950-yhteensopivaan rajoitettuun virtalhteeseen. Attention Warnung Ce produit doit tre connect une source d'alimentation lectrique par cble Ethernet (PoE) conforme la norme IEEE 802.3af ou une source d'alimentation limite conforme la norme IEC60950. Dieses Produkt muss entweder an eine Stromquelle angeschlossen sein, die mit dem IEEE 802.3af-Standard Power-over-Ethernet (PoE) kompatibel ist oder an eine Stromquelle fr geringe Leistungen, die IEC60950-kompatibel ist. Avvertenza Questo prodotto deve essere connesso a una fonte di alimentazione di tipo PoE

(power-over-ethernet) conforme a IEEE 802.3af o a una fonte di alimentazione conforme a IEC60950. Advarsel Dette produktet m vre koblet til en Power-over-Ethernet (PoE) IEEE 802.3af-kompatibel strmkilde eller en IEC60950-kompatibel begrenset strmkilde. Aviso Este produto tem de estar ligado a uma fonte de alimentao compatvel com a norma IEEE 802.3af, tambm conhecida pela sigla Power over Ethernet (PoE), ou a uma fonte de alimentao limitada compatvel com a norma IEC60950. Advertencia!

Debe conectar este producto a una fuente de alimentacin sobre ethernet (PoE) conforme con el estndar IEEE 802.3af, o a una fuente limitada conforme con el estndar IEC60950. Varning!

Denna produkt mste vara ansluten till en PoE IEEE 802.3af-kompatibel strmklla eller en IEC60950-kompatibel begrnsad strmklla. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 9 Statement 378Read Wall-Mounting Instructions Before Installation Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 378 Waarschuwing Lees de wandbevestigingsinstructies aandachtig door voordat u met de installatie begint. Het niet gebruiken van de juiste hardware of het opvolgen van de juiste procedures kan resulteren in een gevaarlijke situatie voor mensen en schade aan het systeem. Varoitus Attention Warnung Lue seinkiinnitysohjeet huolellisesti lpi ennen tyn aloitusta. Mikli kiinnityksess ei kytet oikeanlaisia tykaluja tai ohjeita ei noudateta tarkasti, jrjestelm saattaa aiheuttaa vaaratilanteen tai se voi vaurioitua. Lisez les instructions de montage murale avec attention avant de commencer l'installation. Ne pas utiliser le matriel correct ou ne pas suivre les procdures correctes pourrait donner rsultat a une situation dangereuse pour les utilisateurs et endommager le systme. Bitte lesen Sie vor Beginn der Installierung die Anleitungen zur Wandmontage sorgfltig durch. Verwendung von inkorrekter Apparatur oder Nichtbefolgung der vorgeschriebenen Methoden kann zur Gefhrdung von Personen oder Schaden am System fhren. Avvertenza Leggere attentamente le istruzioni per il montaggio al muro prima di iniziare l'installazione. Un errato uso del corretto hardware o il mancato rispetto delle corrette procedure potrebbe avere come conseguenza una situazione di pericolo per le persone e danni al sistema. Advarsel Les nye gjennom instruksene om veggmontering fr du begynner monteringen. Dersom man ikke bruker riktig maskinvare eller ikke flger riktig framgangsmte kan det resultere i risiko for personskader og skade p systemet. Aviso Leia com cuidado as instrues de montagem na parede antes de iniciar a instalao. Falha em usar o hardware correto ou em seguir os procedimentos corretos pode resultar numa situao de risco para as pessoas e danos ao sistema. Regulatory Compliance and Safety Information for Cisco DX Series 10 OL-28934-01 Advertencia!

Lea atentamente las instrucciones que se encuentran en la pared antes de comenzar con la instalacin. Si no utiliza el hardware correcto o no sigue los procedimientos correctos se podra producir una situacin peligrosa para las personas y daos al sistema. Varning!

Ls vggmonteringsintruktionerna noga innan du pbrjar installationen. Frsummelse av att inte anvnda rtt hrdvara eller att inte fjla korrekt tillvgagngstt kan resultera i en riskabel situation fr mnniskor och kan skada systemet. Statement 1001Work During Lightning Activity Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen. Varoitus l tyskentele jrjestelmn parissa lk yhdist tai irrota kaapeleita ukkosilmalla. Attention Ne pas travailler sur le systme ni brancher ou dbrancher les cbles pendant un orage. Warnung Arbeiten Sie nicht am System und schlieen Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert. Avvertenza Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini. Advarsel Utfr aldri arbeid p systemet, eller koble kabler til eller fra systemet nr det tordner eller lyner. Aviso No trabalhe no sistema ou ligue e desligue cabos durante perodos de mau tempo (trovoada). OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 11 Advertencia!

No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas elctricas en la atmsfera. Varning!

Vid ska skall du aldrig utfra arbete p systemet eller ansluta eller koppla loss kablar. Statement 1004Installation Instructions Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Waarschuwing Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit. Varoitus Lue asennusohjeet ennen jrjestelmn yhdistmist virtalhteeseen. Attention Avant de brancher le systme sur la source d'alimentation, consulter les directives d'installation. Warnung Vor dem Anschlieen des Systems an die Stromquelle die Installationsanweisungen lesen. Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema all'alimentatore. Advarsel Les installasjonsinstruksjonene fr systemet kobles til strmkilden. Aviso Leia as instrues de instalao antes de ligar o sistema fonte de energia. Advertencia!

Lea las instrucciones de instalacin antes de conectar el sistema a la red de alimentacin. Varning!

Ls installationsanvisningarna innan du kopplar systemet till strmfrsrjningsenheten. Regulatory Compliance and Safety Information for Cisco DX Series 12 OL-28934-01 Statement 1005Circuit Breaker Warning This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than:

120 VAC, 15A U.S. (240 VAC, 10A international) Waarschuwing Dit product is afhankelijk van de installatie van het gebouw voor beveiliging tegen kortsluiting

(overstroom). Controleer of de beschermingsinrichting niet meer dan:

120 VAC, 15A U.S. (240 VAC, 10A international) is. Varoitus Attention Tm tuote on riippuvainen rakennukseen asennetusta oikosulkusuojauksesta

(ylivirtasuojauksesta). Varmista, ett suojalaitteen mitoitus ei ole yli:

120 VAC, 15A U.S. (240 VAC, 10A international) Pour ce qui est de la protection contre les courts-circuits (surtension), ce produit dpend de l'installation lectrique du local. Vrifiez que le courant nominal du dispositif de protection n'est pas suprieur :

120 VAC, 15A U.S. (240 VAC, 10A international) OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 13 Warnung Dieses Produkt ist darauf angewiesen, dass im Gebude ein Kurzschluss- bzw. berstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der Schutzvorrichtung nicht mehr als:

120 VAC, 15A U.S. (240 VAC, 10A international) betrgt. Avvertenza Questo prodotto dipende dall'impianto dell'edificio per quanto riguarda la protezione contro cortocircuiti (sovracorrente). Assicurarsi che il dispositivo di protezione non abbia un rating superiore a:

120 VAC, 15A U.S. (240 VAC, 10A international) Advarsel Dette produktet er avhengig av bygningens installasjoner av kortslutnings (overstrm)-beskyttelse. Pse at verneenheten ikke er merket hyere enn:

120 VAC, 15A U.S. (240 VAC, 10A international) Aviso Este produto depende das instalaes existentes para proteo contra curto-circuito (sobrecarga). Assegure-se de que o fusvel ou disjuntor no seja superior a:

120 VAC, 15A U.S. (240 VAC, 10A international) Advertencia!

Este equipo utiliza el sistema de proteccin contra cortocircuitos (o sobrecorrientes) del edificio. Asegrese de que el dispositivo de proteccin no sea superior a:

120 VAC, 15A U.S. (240 VAC, 10A international) Varning!

Denna produkt r beroende av i byggnaden installerat kortslutningsskydd (verstrmsskydd). Kontrollera att skyddsanordningen inte har hgre mrkvrde n:

120 VAC, 15A U.S. (240 VAC, 10A international) 120 VAC, 15A U.S. (240 VAC, 10A international) 120 VAC, 15A U.S. (240 VAC, 10A international) 120 VAC, 15A U.S. (240 VAC, 10A international) 120 VAC, 15A U.S. (240 VAC, 10A international) Regulatory Compliance and Safety Information for Cisco DX Series 14 OL-28934-01 Statement 1019Main Disconnecting Device Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019 Waarschuwing De combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting. Varoitus Pistoke/liitinkohta toimii pkatkaisumekanismina. Psy siihen on pidettv aina esteettmn. Attention La combinaison de prise de courant doit tre accessible tout moment parce qu'elle fait office de systme principal de dconnexion. Warnung Der Netzkabelanschlu am Gert mu jederzeit zugnglich sein, weil er als primre Ausschaltvorrichtung dient. Avvertenza Il gruppo spina-presa deve essere sempre accessibile, poich viene utilizzato come dispositivo di scollegamento principale. Advarsel Kombinasjonen stpsel/uttak m alltid vre tilgjengelig ettersom den fungerer som hovedfrakoplingsenhet. Aviso A combinao ficha-tomada dever ser sempre acessvel, porque funciona como interruptor principal. Advertencia!

El conjunto de clavija y toma ha de encontrarse siempre accesible ya que hace las veces de dispositivo de desconexin principal. Varning!

Man mste alltid kunna komma t stickproppen i uttaget, eftersom denna koppling utgr den huvudsakliga frnkopplingsanordningen. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 15 Statement 1021SELV Circuit Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Waarschuwing Om elektrische schokken te vermijden, mogen veiligheidscircuits met extra lage spanning

(genaamd SELV = Safety Extra-Low Voltage) niet met telefoonnetwerkspanning (TNV) circuits verbonden worden. LAN (Lokaal netwerk) poorten bevatten SELV circuits en WAN (Regionaal netwerk) poorten bevatten TNV circuits. Sommige LAN en WAN poorten gebruiken allebei RJ-45 connectors. Ga voorzichtig te werk wanneer u kabels verbindt. Varoitus Attention Jotta vltyt shkiskulta, l kytke pienjnnitteisi SELV-suojapiirej puhelinverkkojnnitett

(TNV) kyttviin virtapiireihin. LAN-portit sisltvt SELV-piirej ja WAN-portit puhelinverkkojnnitett kyttvi piirej. Osa sek LAN- ett WAN-porteista kytt RJ-45-liittimi. Ole varovainen kytkiesssi kaapeleita. Pour viter une lectrocution, ne raccordez pas les circuits de scurit basse tension (Safety Extra-Low Voltage ou SELV) des circuits de tension de rseau tlphonique (Telephone Network Voltage ou TNV). Les ports du rseau local (LAN) contiennent des circuits SELV et les ports du rseau longue distance (WAN) sont munis de circuits TNV. Certains ports LAN et WAN utilisent des connecteurs RJ-45. Raccordez les cbles en prenant toutes les prcautions ncessaires. Regulatory Compliance and Safety Information for Cisco DX Series 16 OL-28934-01 Warnung Zur Vermeidung von Elektroschock die Sicherheits-Kleinspannungs-Stromkreise (SELV-Kreise) nicht an Fernsprechnetzspannungs-Stromkreise (TNV-Kreise) anschlieen. LAN-Ports enthalten SELV-Kreise, und WAN-Ports enthalten TNV-Kreise. Einige LAN- und WAN-Ports verwenden auch RJ-45-Steckverbinder. Vorsicht beim Anschlieen von Kabeln. Avvertenza Per evitare scosse elettriche, non collegare circuiti di sicurezza a tensione molto bassa (SELV) ai circuiti a tensione di rete telefonica (TNV). Le porte LAN contengono circuiti SELV e le porte WAN contengono circuiti TNV. Alcune porte LAN e WAN fanno uso di connettori RJ-45. Fare attenzione quando si collegano cavi. Advarsel Unng koble lavspenningskretser (SELV) til kretser for telenettspenning (TNV), slik at du unngr elektrisk stt. LAN-utganger inneholder SELV-kretser og WAN-utganger inneholder TNV-kretser. Det finnes bde LAN-utganger og WAN-utganger som bruker RJ-45-kontakter. Vr forsiktig nr du kobler kabler. Aviso Para evitar choques elctricos, no conecte os circuitos de segurana de baixa tenso (SELV) aos circuitos de tenso de rede telefnica (TNV). As portas LAN contm circuitos SELV e as portas WAN contm circuitos TNV. Algumas portas LAN e WAN usam conectores RJ-45. Tenha o devido cuidado ao conectar os cabos. Advertencia!

Para evitar la sacudida elctrica, no conectar circuitos de seguridad de voltaje muy bajo (safety extra-low voltage = SELV) con circuitos de voltaje de red telefnica (telephone network voltage =

TNV). Los puertos de redes de rea local (local area network = LAN) contienen circuitos SELV, y los puertos de redes de rea extendida (wide area network = WAN) contienen circuitos TNV. En algunos casos, tanto los puertos LAN como los WAN usan conectores RJ-45. Proceda con precaucin al conectar los cables. Varning!

Fr att undvika elektriska sttar, koppla inte skerhetskretsar med extra lg spnning

(SELV-kretsar) till kretsar med telefonntspnning (TNV-kretsar). LAN-portar innehller SELV-kretsar och WAN-portar innehller TNV-kretsar. Vissa LAN- och WAN-portar r frsedda med RJ-45-kontakter. Iaktta frsiktighet vid anslutning av kablar. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 17 Statement 1030Equipment Installation Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Waarschuwing Deze apparatuur mag alleen worden genstalleerd, vervangen of hersteld door bevoegd geschoold personeel. Varoitus Tmn laitteen saa asentaa, vaihtaa tai huoltaa ainoastaan koulutettu ja laitteen tunteva henkilkunta. Attention Il est vivement recommand de confier l'installation, le remplacement et la maintenance de ces quipements des personnels qualifis et expriments. Warnung Das Installieren, Ersetzen oder Bedienen dieser Ausrstung sollte nur geschultem, qualifiziertem Personal gestattet werden. Avvertenza Questo apparato pu essere installato, sostituito o mantenuto unicamente da un personale competente. Advarsel Bare opplrt og kvalifisert personell skal foreta installasjoner, utskiftninger eller service p dette utstyret. Aviso Apenas pessoal treinado e qualificado deve ser autorizado a instalar, substituir ou fazer a reviso deste equipamento. Advertencia!

Solamente el personal calificado debe instalar, reemplazar o utilizar este equipo. Varning!

Endast utbildad och kvalificerad personal br f tilltelse att installera, byta ut eller reparera denna utrustning. Regulatory Compliance and Safety Information for Cisco DX Series 18 OL-28934-01 Aviso Somente uma equipe treinada e qualificada tem permisso para instalar, substituir ou dar manuteno a este equipamento. Advarsel Kun uddannede personer m installere, udskifte komponenter i eller servicere dette udstyr. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 19 Statement 1040Product Disposal Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Waarschuwing Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. Varoitus Tm tuote on hvitettv kansallisten lakien ja mrysten mukaisesti. Attention La mise au rebut ou le recyclage de ce produit sont gnralement soumis des lois et/ou directives de respect de l'environnement. Renseignez-vous auprs de l'organisme comptent. Warnung Die Entsorgung dieses Produkts sollte gem allen Bestimmungen und Gesetzen des Landes erfolgen. Avvertenza Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali. Advarsel Endelig kassering av dette produktet skal vre i henhold til alle relevante nasjonale lover og bestemmelser. Aviso Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais. Advertencia!

Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Varning!

Vid deponering hanteras produkten enligt gllande lagar och bestmmelser. Aviso O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentaes nacionais. Advarsel Endelig bortskaffelse af dette produkt skal ske i henhold til gldende love og regler. Regulatory Compliance and Safety Information for Cisco DX Series 20 OL-28934-01 OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 21 Statement 1072Shock Hazard from Interconnections Warning Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if interconnections are made using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such interconnection methods, unless the exposed metal parts are located within a restricted access location and users and service people who are authorized within the restricted access location are made aware of the hazard. A restricted access area can be accessed only through the use of a special tool, lock and key or other means of security. Statement 1072 Waarschuwing Voltages kunnen elektrische schokken veroorzaken in PoE (Power over Ethernet)-circuits als er verbindingen worden gemaakt met blootliggende metalen contactpunten, geleiders of aansluitingspunten die niet zijn gesoleerd. Gebruik dit type verbinding niet tenzij de blootliggende metalen onderdelen zich bevinden op een locatie met beperkte toegang en de gebruikers en onderhoudstechnici die toegang tot deze locatie hebben, op het gevaar worden gewezen. De locatie met beperkte toegang kan alleen worden geopend met speciaal gereedschap, slot en sleutel of een andere beveiligingsmethode. Varoitus Attention Warnung Sisisiss Ethernet (PoE) -virtapiireiss voi olla shkiskun vaaran aiheuttavia jnnitteit, jos kytkentihin kytetn eristmttmi paljaita metalliliittimi tai -johtimia. Vlt tllaisia kytkentj, elleivt paljaat metalliosat ole rajatussa paikassa. Ilmoita valtuutetuille kyttjille ja huoltohenkilille vaarasta. Rajattuun alueeseen psee ksiksi ainoastaan erityistykalua, lukkoa ja avainta tai muuta turvallista menetelm kyttmll. Les tensions existant sur les alimentations utilisant la technologie PoE (Power over Ethernet) peuvent constituer un risque d'lectrocution si les interconnexions sont effectues en utilisant des terminaux, conducteurs ou contacts mtalliques exposs non isols. vitez d'utiliser de telles mthodes d'interconnexion moins que les pices mtalliques exposes ne se trouvent dans un emplacement d'accs restreint et que les utilisateurs et les responsables du service autoriss dans cet emplacement d'accs restreint ne soient conscients du danger. Une zone d'accs restreint peut tre accde uniquement l'aide d'une cl, d'un outil et d'un verrou spcial, ou d'autres moyens de scurit. Bei Power-over-Ethernet-(PoE-)Schaltkreisen besteht u.U. Stromschlaggefahr, wenn Verbindungen unter Verwendung nicht isolierter, freiliegender Metallkontakte, Leiter oder Anschlussklemmen hergestellt werden. Vermeiden Sie das Herstellen solcher Verbindungen, es sei denn, die freiliegenden Metallteile befinden sich an Orten mit beschrnktem Zugang, und Personen, die Zugang dazu haben, sind ausdrcklich ber diese Gefahr informiert worden. Ein Ort mit beschrnktem Zugang ist nur mit Hilfe eines speziellen Werkzeugs, Schloss und Schlssels oder anderen Sicherheitseinrichtungen zugnglich. Avvertenza Nei circuiti con alimentazione via Ethernet (PoE) possono verificarsi pericoli di scosse elettriche se si creano connessioni con contatti metallici, conduttori o terminali scoperti. Evitare di utilizzare i metodi di connessione sopraelencati a meno che le parti metalliche esposte non si trovino in una zona riservata e gli utenti e il personale di assistenza, che sono autorizzati ad accedere nella suddetta zona, siano stati messi al corrente del pericolo. possibile accedere alla zona riservata solamente utilizzando gli appositi elementi di sicurezza. Regulatory Compliance and Safety Information for Cisco DX Series 22 OL-28934-01 Advarsel Aviso I strmkretser med PoE (Power over Ethernet) kan det vre spenninger som kan utgjre sttfare hvis det blir foretatt sammenkoblinger med uisolerte, eksponerte kontakter, ledere eller terminaler av metall. Unng bruke slike sammenkoblingsmetoder med mindre de eksponerte metalldelene er i et omrde med begrenset tilgang, og brukere og servicepersonell som har tilgang til det begrensede omrdet, blir gjort oppmerksom p faren. Et omrde med begrenset tilgang kan bare pnes ved hjelp av spesialverkty, nkkel eller andre sikkerhetstiltak. Pode haver voltagens que representam perigo de choque em circuitos PoE (Power over Ethernet) se as interconexes forem feitas utilizando-se terminais, condutores ou contatos de metal exposto e sem isolamento. Evite utilizar tais mtodos de interconexo a no ser que as partes de metal expostas estejam em um local de acesso restrito e os usurios e o pessoal de servio com acesso autorizado a este local restrito estejam cientes do perigo. Uma rea de acesso restrito s pode ser acessada com o uso de uma ferramenta, fechadura e chave especial ou de outros meios de segurana. Advertencia!

Puede haber voltajes con riesgo de shock en circuitos de alimentacin sobre el cableado Ethernet

(PoE), si para las interconexiones se utilizan contactos, conductores o terminales metlicos descubiertos. Evite tales mtodos de interconexin, a menos que las partes metlicas descubiertas se encuentren en un lugar de acceso restringido y tanto los usuarios como el personal de servicios en dicho lugar sean conscientes de la existencia de tal riesgo. Slo se puede tener acceso a una zona de acceso restringido mediante el uso de una herramienta especial, un candado y una llave u otros medios de seguridad. Varning!

Det kan finnas spnningar p PoE-kretsarna (Power over Ethernet) som utgr risk fr sttar om sammankopplingarna grs med ej isolerade, exponerade kontakter, ledare och/eller terminaler av metall. Undvik att anvnda sdana sammankopplingsmetoder, svida inte de exponerade metalldelarna finns i en plats med begrnsad tkomst. Anvndare och servicepersonal som tillts inom platsen med begrnsad tkomst mste vara medvetna om risken. Ett begrnsat omrde kan bara ns med ett speciellt verktyg eller ls, en speciell nyckel eller ngon annan skerhetsmetod. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 23 Statement 1074Comply with Local and National Electrical Codes Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 Waarschuwing Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften. Varoitus Laitteisto tulee asentaa paikallisten ja kansallisten shkmrysten mukaisesti. Attention L'quipement doit tre install conformment aux normes lectriques nationales et locales. Warnung Die Installation der Gerte muss den Sicherheitsstandards entsprechen. Avvertenza L'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali. Advarsel Installasjon av utstyret m samsvare med lokale og nasjonale elektrisitetsforskrifter. Aviso A instalao do equipamento tem de estar em conformidade com os cdigos elctricos locais e nacionais. Advertencia!

La instalacin del equipo debe cumplir con las normativas de electricidad locales y nacionales. Varning!

Installation av utrustningen mste ske i enlighet med gllande elinstallationsfreskrifter. Regulatory Compliance and Safety Information for Cisco DX Series 24 OL-28934-01 Caution Only use the Cisco specified power supply. Refer to the installation manual provided with this product. Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24AWG communication cable. NOM 121 for Mexico for Cisco DX Series Warning La operacin de este equipo est sujeta a las siguientes dos condiciones (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 25 Japanese Electric Appliance and Radio Laws Statement 371Power Cable and AC Adapter Statement 372Wireless LAN Products Statement 391Low-Power Radio Data Communications Systems (ARIB-STD) Cell Phone Interference Caution Caution Using a cell, mobile, or GSM phone, or two-way radio in close proximity to a Cisco DX Series collaboration desk endpoint might cause interference. For more information, refer to the manufacturer's documentation of the interfering device. Regulatory Compliance and Safety Information for Cisco DX Series 26 OL-28934-01 Using External Devices with Your Cisco DX Series Collaboration Desk Endpoint The following information applies when you use external devices with Cisco DX Series collaboration desk endpoints:

Cisco recommends the use of good quality external devices (speakers, microphones, and headsets) that are shielded (screened) against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or more of the following actions:

Move the external device away from the source of the RF or AF signals.

Route the external device cables away from the source of the RF or AF signals.

Use shielded (screened) cables for the external device, or use cables with a better shield (screen) and connector.

Shorten the length of the external device cable.

Apply ferrites or other such devices on the cables for the external device. Cisco cannot guarantee the performance of the system because Cisco has no control over the quality of external devices, cables, and connectors. The system will perform adequately when suitable devices are attached using good quality cables and connectors. Caution Caution: In European Union countries, use only external speakers, microphones, and headsets that are fully compliant with the EMC Directive [89/336/EC]. European Directives This section contains conformity statements for European directives. Statement 287Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. English:

[Bulgarian]:

[Czech]:

OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 27 Dansk

[Danish]:

Dette udstyr er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. Deutsch

[German]:

Dieses Gert entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. Eesti

[Estonian]:

Espaol

[Spanish]:

[Greek]:

Franais

[French]:

slenska

[Icelandic]:

See seade vastab direktiivi 1999/5/E olulistele nuetele ja teistele asjakohastele stetele. Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE. Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC. etta tki er samkvmt grunnkrfum og rum vieigandi kvum Tilskipunar 1999/5/EC. Italiano

[Italian]:

Questo apparato conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. Latviski

[Latvian]:

[Lithuanian]:

Nederlands

[Dutch]:

Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC. Malti

[Maltese]:

Magyar

[Hungarian]:

Norsk

[Norwegian]:

Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF. Polski

[Polish]:

Portugus

[Portuguese]:

Este equipamento est em conformidade com os requisitos essenciais e outras provises relevantes da Directiva 1999/5/EC.

[Romanian]:

Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 1999/5/EC. Regulatory Compliance and Safety Information for Cisco DX Series 28 OL-28934-01 Slovensko

[Slovenian]:

Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC. Slovensky

[Slovak]:

Toto zariadenie je v zhode so zkladnmi poiadavkami a inmi prslunmi nariadeniami direktv:

1999/5/EC. Suomi

[Finnish]:

Svenska

[Swedish]:

CE Mark For Cisco DX Series collaboration desk endpoints, the following CE mark and class-2 identifier are affixed to the equipment and packaging:

National Restrictions In the majority of the EU and other European Countries, the 2.4- and 5-GHz bands have been made available for the use of wireless LANs. Table 1 provides an overview of the regulatory requirements in general applicable for the 2.4- and 5-GHz bands. Note The regulatory limits for maximum output power are specified in eirp. The eirp level of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm). The requirements for any country may evolve. Cisco recommends that you check with the local authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs. Table 1 Overview of Regulatory Requirements for Wireless LANs Frequency Band (MHz) 24002483.5 515053501 547057251 Max Power Level (eirp) (mW) 100 200 1000 Indoor Only X Indoor and Outdoor X X 1. Dynamic Frequency Selection and Transmit Power Control is required in the 5250 to 5350 MHz and 5470 to 5725 MHz frequency range. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 29 Compliance and Safety Information This product meets applicable national electromagnetic field (EMF) limits as specified in the regulations for this type of device. The specific information on the values and installation requirements to comply with the regulations can be found in the Product safety, security, accessibility, and related information section of the product User Guide as well as in this document. Regulatory Compliance For specifics about which standards have been applied, refer to the Declaration of Conformity:

Specification Safety Description

UL 60950-1 Second Edition

CAN/CSA-C22.2 No. 60950-1 Second Edition EMC Telecom (IP Phones)

EN 60950-1 Second Edition

IEC 60950-1 Second Edition

AS/NZS 60950-1

FCC Part 15 (CFR 47) Class B

ICES-003 Class B

EN55022 Class B

CISPR22 Class B

CISPR24

AS/NZS CISPR22 Class B

VCCI Class B

EN55024

KN24

EN 61000-3-2

EN 61000-3-3

EN300386

EN 60601-1-2

KN22 Class B CS-03 - HAC FCC Part 68 (HAC) AS/ACIF S004 AS/ACIF S040 NZ PTC 220 DR Regulatory Compliance and Safety Information for Cisco DX Series 30 OL-28934-01 Specification Industry Standards Description TIA 810 A/B (model dependent) Radio TIA 920 (model dependent) DSPR Gray Book 2000 DSPR Technical Condition Book 2004 RRL Notice No. 2005-96 RRL Notice No. 2004-42 Canada:

RSS-210

RSS-102 EU:

EN 300.328

EN50385

EN 301.893 Japan:

W5.3-W5.6

5.6GHz WLAN TPS-DFC USA:

FCC Part 15.247

FCC Part 15.407 Caution See Statement 4043Caution U-NII Devices are Restricted section on page 33.

47 CFR Part 2

47 CFR Part 15.401

OET-65 Korea:

RRL No. 2006-128

RRL No. 2006-129 Taiwan:

LP0002 OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 31 DGT Warning Statement for Cisco DX Series Collaboration Desk Endpoints FCC Safety Compliance Statement The Federal Communications Commission (FCC), with its action in ET Docket 93-62, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC-certified equipment. The Cisco DX Series collaboration desk endpoint meets the uncontrolled environmental limits as stated in OET-65C (01-01) when operated in accordance with the operation guidelines described in this manual. Proper operation of this radio device according to the instructions in this publication will result in user exposure substantially below the FCC recommended limits. The Cisco DX Series collaboration desk endpoint complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20 cm from the user and must not be co-located or operated in conjunction with any other antenna or transmitter. Regulatory Compliance and Safety Information for Cisco DX Series 32 OL-28934-01 Statement 4043Caution U-NII Devices are Restricted Caution Within the 5.47 to 5.75 GHz band the U-NII devices are restricted to indoor operations to reduce any potential for harmful interference to weather radar at this time. Further no operation in the 5600-5650MHz band is allowed at this time. Manufacturers FCC Declaration of Conformity Statement Model: Cisco DX650 Manufacturer: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA Statement 2018Class B Notice for FCC Modifying the equipment without Ciscos authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Cisco, including the use of non-Cisco antennas, could void the users authority to operate this device. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 33 Statement 2022Class B Notice for Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) Statement 4008Devices Operating in the 51505250 MHz Band The band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Statement 4009Devices Operating in the 5 GHz DFS Bands Caution High-power radars are allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices Canadian Compliance for Cisco DX Series Collaboration Desk Endpoint This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Avis de conformit canadien du tlphone Cisco DX Series Ce dispositif est conforme aux normes CNR exemptes de licence dIndustrie Canada. Le fonctionnement de ce dispositif est autoris sous rserve des deux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Canadian RF Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20 cm from the user and must not be collocated or operated in conjunction with any other antenna or transmitter. Dclaration d'exposition aux RF canadienne Cet appareil est conforme aux limites dexposition aux rayonnements dfinies pour un environnement non contrl. Les utilisateurs finaux doivent suivre les instructions de fonctionnement spcifiques pour satisfaire la conformit aux expositions RF. Cet metteur doit tre d'au moins 20 cm de l'utilisateur et ne doit pas tre co-implants ou exploits conjointement avec une autre antenne ou metteur. Regulatory Compliance and Safety Information for Cisco DX Series 34 OL-28934-01 Statement 295Class B Warning for Korea Warning This is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas. Statement 157VCCI Compliance for Class B Equipment Warning This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual. VCCI-B Statement 355Telephone Receivers Produce a Magnetic Field Note Statement 355 applies only to the Cisco IP Phone 7985G. Warning Telephone receivers produce a magnetic field that can attract small magnetic objects such as pins and staples. To avoid the possibility of injury, do not place the handset where such objects may be picked up. Statement 355 Waarschuwing Telefoonontvangers produceren een magnetisch veld dat kleine magnetische objecten, zoals spelden of nietjes, kan aantrekken. Leg de hoorn niet ergens neer waar zich dergelijke objecten kunnen bevinden, om verwondingen te voorkomen. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 35 Varoitus Attention Warnung Puhelimen ymprille muodostuu magneettikentt, joka vet puoleensa pieni magneettisia esineit, kuten niittej ja klemmareita. Aseta kuuloke aina paikkaan, jossa kyseisi esineit ei ole. Nin vltt loukkaamasta itsesi. Les combins tlphoniques produisent un champ magntique susceptible d'attirer de petits objets magntiques tels que des pingles ou des agrafes. Pour viter tout risque de blessure, ne placez pas le combin un endroit o de tels objets peuvent se trouver. Telefonhrer erzeugen ein Magnetfeld, das kleine magnetische Objekte wie Nadeln und Broklammern anziehen kann. Um eine Verletzungsgefahr auszuschlieen, legen Sie den Hrer nicht in die Nhe solcher Objekte. Avvertenza I ricevitori telefonici producono un campo magnetico in grado di attrarre piccoli oggetti magnetici quali spilli e punti metallici. Per evitare danni personali, non posizionare il ricevitore accanto a tali oggetti. Advarsel Hndsettet lager et magnetfelt som kan tiltrekke seg sm magnetiske objekter som nler og stifter. For unng skade br du ikke plassere hndsettet der det finnes slike objekter. Aviso Os auscultadores telefnicos produzem um campo magntico que pode atrair pequenos objectos magnticos como por exemplo alfinetes e agrafos. Para evitar eventuais ferimentos, no coloque o auscultador prximo deste tipo de objectos. Advertencia!

Los receptores telefnicos producen un campo magntico que puede atraer objetos pequeos, como alfileres o grapas. Para evitar posibles lesiones, no coloque el aparato cerca de objetos de este tipo. Varning!

Telefonmottagare genererar magnetflt som kan dra till sig sm magnetiska freml, t.ex. nlar och hftklamrar. Undvik att lgga luren i nrheten av sdana freml. Regulatory Compliance and Safety Information for Cisco DX Series 36 OL-28934-01 Compliance Statement for Argentina Advertencia No utilizar una fuente de alimentacin con caractersticas distintas a las expresadas ya que podra ser peligroso. Warning Statement for Brazil Compliance Statement for Brazil This section applies only to Cisco DX650. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 37 Regulatory Compliance and Safety Information for Cisco DX Series 38 OL-28934-01 Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly Whats New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the Whats New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) Copyright 2014 Cisco Systems, Inc. All rights reserved. OL-28934-01 Regulatory Compliance and Safety Information for Cisco DX Series 39 Regulatory Compliance and Safety Information for Cisco DX Series 40 OL-28934-01