all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
USERS MANUAL | Users Manual | 1.91 MiB | August 08 2012 | |||
1 | Cover Letter(s) | August 08 2012 | ||||||
1 | Cover Letter(s) | August 08 2012 | ||||||
1 | External Photos | August 08 2012 | ||||||
1 | Internal Photos | August 08 2012 | ||||||
1 | ID Label/Location Info | August 08 2012 | ||||||
1 | ID Label/Location Info | August 08 2012 | ||||||
1 | RF Exposure Info | August 08 2012 | ||||||
1 | Test Report | August 08 2012 | ||||||
1 | Test Report | August 08 2012 | ||||||
1 | Test Setup Photos | August 08 2012 | ||||||
1 | Attestation Statements | August 08 2012 |
1 | USERS MANUAL | Users Manual | 1.91 MiB | August 08 2012 |
Quick Start Guide Cisco SPA232D Mobility Enhanced ATA Package Contents Analog Telephone Adapter Ethernet Cable Phone Cable Power Adapter Quick Start Guide Product CD-ROM Version franaise sur page 17 pour 32 Deutsche Version auf CD Versione in italiano su CD Versin espagola en CD Verso em portugus em CD Welcome Thank you for choosing a Cisco SPA232D Mobility Enhanced ATA. This guide describes how to physically install the equipment and how to get started configuring the ATA. This guide also explains how to register a Cisco SPA302D Mobility Enhanced Cordless Handset with the Cisco SPA232D, which has an integrated DECT Base Station. Cisco SPA302D handsets registered to the Cisco SPA232D can make and receive calls through a Voice over IP (VoIP) service provider and through the local telephone system (via the LINE port). Only Cisco SPA302D handsets are supported with the Cisco SPA232D. Before You Begin 1 Before you begin the installation, make sure that you have the following equipment and services:
An active Internet account and Voice over IP account Ethernet cable to connect to your broadband network device Phone to connect to your ATA Phone cable to connect your phone Optional: Uninterruptible Power Supply (UPS) to provide backup power Optional: Cisco SPA302D Mobility Enhanced Cordless Handsets 2 Cisco SPA232D Quick Start Guide Product Features 2 Top Panel Feature Page/
Registration LINE PHONE INTERNET SYSTEM Back Panel Feature RESET LINE (Green) Description Steady greenOne or more handsets is registered. Fast flashing greenThe base is in registration mode. To activate registration mode, press the button for at least 7 seconds. Slow flashing greenThe base is in paging mode or a handset is off hook. To activate paging mode to locate a handset, press the button for a few seconds; handsets ring. OffNo handset is registered to the base. Steady greenThe line is off hook and connected to the local telephone system. Slow flashing greenThe line is off hook. OffThe port is not ready. Steady greenThe device is on hook and registered to a SIP proxy. Slow flashing greenThe device is off hook. OffThe port is not ready. Flashing greenTransmitting or receiving data through the WAN port. OffNo link. Steady greenThe system is ready. Slow flashing greenAcquiring an IP address, if applicable. (DHCP is used by default.) Fast flashing greenUpgrading the firmware. OffThere is no power or the system cannot boot up. Description Performs two functions:
Restart the ATA: Press quickly (less than a second) with a paperclip or similar object. Restore the factory default settings: Press and hold for 10 seconds. Connects to an analog phone line, using an RJ-11 phone cable. Cisco SPA232D Quick Start Guide 3 Feature PHONE (Gray) Description Connects to an analog phone, using an RJ-11 phone cable. Connects to a device on your local area network (LAN), such as a computer by using an Ethernet cable. ETHERNET
(Yellow) INTERNET (Blue) Connects to a broadband network device (DSL or cable modem) or a network router by using an Ethernet cable. Connects to a power by using the provided adapter. POWER Default Settings Parameter Administrator Username Administrator Password User Username User Password Internet Connection Type LAN IP Address
(Also the address for the web-
based configuration utility.) DHCP Range
(DHCP server enabled by default.) Netmask PIN for handset registration, IP settings, and SIP settings Default Value admin admin cisco cisco Automatic Configuration - DHCP 192.168.15.1 192.168.15.100-149 255.255.255.0 Blank 4 Cisco SPA232D Quick Start Guide Connecting the Equipment 3 NOTE For wall-mounting instructions, see Additional Information, page 8. STEP 1 Connect the provided Ethernet cable to the INTERNET (Blue) port. Connect the other end of the cable directly to your broadband network device. STEP 2 Connect the provided phone cable to the PHONE 1 (Gray) port. Connect the other end of the cable to your analog phone or fax machine. STEP 3 Optionally, connect an Ethernet network cable to the ETHERNET
(Yellow) port of the ATA. Connect the other end of the cable to a device on your network, such as a computer. STEP 4 Connect an analog phone line to the LINE (Green) port to connect the ATA to your local telephone system. STEP 5 Connect the provided power adapter to the POWER port. The unit powers on. 6 5 7 9 3 2 WAN Cisco SPA232D Quick Start Guide 5 Configuration and Management of the ATA 4 You can use the web-based configuration utility to set up your ATA. You also can use the built-in Interactive Voice Response (IVR) system. (See Using the IVR for Administration, page 8.) STEP 1 Connect the provided Ethernet network cable to the ETHERNET
(Yellow) port of the ATA. Connect the other end of the cable to the Ethernet port of your PC. STEP 2 Power on your computer. NOTE: Make sure your computers Ethernet adapter is set to obtain an IP address automatically (DHCP). For more information, refer to the Help for your operating system. STEP 3 Start a web browser on your computer. STEP 4 In the Address bar, enter: 192.168.15.1 Note: 192.168.15.1 is the default local IP address of the ATA. STEP 5 To log in for the first time, enter the default username, admin, and the default password, admin. The password is case sensitive. NOTE: A user account allows access to limited settings and status pages. To log in as a user, enter cisco as the username and the password. STEP 6 Use the Quick Setup page as needed to register your VoIP accounts in the fields for Line 1 and DECT Line1. Your VoIP service may require only a few basic parameters to successfully register the Cisco SPA232D. The Quick Setup page offers a shortcut to enter the basic parameters. For a more comprehensive listing of parameters, choose the Voice menu, and then use the links in the navigation tree. Enter Proxy: Enter the domain name or URL of the service providers proxy server. Display Name: Enter the name of the business. This name typically is used for the Caller ID. User ID: Enter the user ID for your Internet account with this service provider. Password: Enter the password for your Internet account. Dial Plan (Line 1 only): Keep the default settings
(recommended). Detailed information about the dial plan settings is available in the online Help and the administration guide. 6 Cisco SPA232D Quick Start Guide Note: The Cisco SPA232D assigns DECT Line1 as the default line for outgoing calls from Cisco SPA302D handsets. If needed, you can configure additional VoIP accounts as separate DECT Lines. To do so, choose the Voice menu, and then use the DECT Line 1~10 links in the navigation tree. Use the check boxes on the Quick Setup page to associate the DECT Line(s) to each handset. STEP 7 Click Submit to save your settings. STEP 8 If you wish to change the PIN for handset registration, open the Voice > System page, and then enter up to four digits in the IVR Admin Password field. Click Submit to save your settings. For more information, see the online Help or the administration guide.
(Documentation links are provided in Where to Go From Here, page 14.) Registering a Cisco SPA302D Handset 5 You can register Cisco SPA302D handsets to the integrated DECT base station. These handsets can be purchased separately. STEP 1 On the Cisco SPA302D handset, press the center Select button on the 4-way navigation keypad. STEP 2 Select Register. STEP 3 Using the navigation arrows, scroll to the Settings icon and press the center navigation button to select it. STEP 4 Select Handset Registration. STEP 5 On the Cisco SPA232D, press the Page/Registration button and hold it down for at least seven seconds until the green status light flashes quickly. TIP: If you press the button for fewer than seven seconds, the green status light flashes slowly, indicating the unit is in paging mode and is not in registration mode. Registration will not work if the unit is in paging mode. STEP 6 The default PIN is blank, so do not enter a PIN. Press the left softkey to confirm that you want to register the handset. The registering message appears. Cisco SPA232D Quick Start Guide 7 STEP 7 To verify that the handset registered to the base station, confirm that the wireless status icon is solid and that the handset ID, such as DECT1 or DECT 2, appears near the top right corner of the display screen. Additional Information 6 Using the IVR for Administration An IVR system is available to help you to configure and manage your ATA. You can use the telephone keypad to select options and to make your entries. To access the IVR menu:
STEP 1 Connect an analog phone to the PHONE port of the ATA. STEP 2 Press the star key four times: ****
STEP 3 After the greeting plays, press the keys on the phone keypad to select your options. STEP 4 Enter the code for the desired action. See the IVR Actions table for details. TIPS:
Enter the numbers slowly, listening for the audio confirmation before entering the next number. After you select an option, press the # (pound) key. To exit the menu, hang up the telephone or enter 3948# to exit. After entering a value, such as an IP address, press the # (pound) key to indicate that you have finished your selection. To save the new setting, press 1. To review the new setting, press 2. To re-enter the new setting, press 3. To cancel your entry and return to the main menu, press * (star). While entering a value, you can cancel the changes by pressing the *
(star) key twice within half a second. Be sure to press the key quickly, or the * will be treated as a decimal point entry. If the menu is inactive for more than one minute, the ATA times out. You will need to re-enter the menu by pressing the star key four times: ****. Your settings take effect after you hang up the telephone or exit the IVR. The ATA may reboot at this time. 8 Cisco SPA232D Quick Start Guide To enter the decimal points in an IP address, press the * (star) key. For example, to enter the IP address 191.168.1.105, perform the following tasks:
Press these keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address. Press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu. IVR Actions IVR Action Enter IVR Menu Check Internet Connection Type Set Internet Connection Type Menu Option
****
100 101 Check Internet IP Address
(WAN port) Set Static IP Address (WAN) 111 110 Check Network Mask Set Network Mask 120 121 Choices and Instructions DHCP: 0 Static IP: 1 PPPoE: Press 2 Enter the IP address by using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. Note: This option is available only after you choose Static IP as the Internet Connection Type, through option 101. To enter the value, press numbers on the telephone key pad. Press the * (star) key to enter a decimal point. Note: This option is available only after you choose Static IP as the Internet Connection Type, through option 101. Cisco SPA232D Quick Start Guide 9 IVR Action Menu Option Choices and Instructions Check Gateway IP Address 130 Set Gateway IP Address 131 Check MAC Address Check Firmware Version Check Primary DNS Server Setting Set Primary DNS Server 140 150 160 161 To enter the value, press numbers on the telephone key pad. Press the * (star) key to enter a decimal point. Note: This option is available only after you choose Static IP as the Internet Connection Type, through option 101. To enter the value, press numbers on the telephone key pad. Press the * (star) key to enter a decimal point. Note: This option is available only after you choose Static IP as the Internet Connection Type, through option 101. Check Internet web server port SPA122 only: Check LAN IP address (Ethernet port) Announce Line 1 SIP Transport Set Line 1 SIP Transport 170 210 1910 1911 Check Line 2 SIP Transport 1920 Set Line 2 SIP Transport 1921 Exit IVR 3948 0: UDP 1: TCP 2: TLS 0: UDP 1: TCP 2: TLS 10 Cisco SPA232D Quick Start Guide IVR Action Allow or prevent WAN access to the administration web server The system will allow WAN access only if the default admin username and password have been changed in the Configuration Utility. Factory Reset of Unit WARNING: All non-default settings will be lost. This includes network and service provider data. Reboot of Voice System Menu Option 7932 Choices and Instructions 1: Enable 0: Disable 73738 RESET When prompted, press 1 to confirm, or press * (star) to cancel. After you hear Option successful, hang up the phone. The ATA reboots. 732668 REBOOT After you hear Option successful, hang up the phone. The ATA reboots. Cisco SPA232D Quick Start Guide 11 Mounting the ATA You can place the ATA on a desktop or mount it on a wall. CAUTION To prevent the ATA from overheating, do not operate it in an area that exceeds an ambient temperature of 104F (40C). Desktop Placement Place the ATA on a flat surface near an electrical outlet. WARNING Do not place anything on top of the ATA; excessive weight could damage it. Wall Mounting The ATA has two wall-mount slots on the bottom panel. To mount the ATA on a wall, you need mounting hardware (not included). Suggested hardware is illustrated (not true to scale). Recommended hardware (not included): Two number-six pan-head tapping screws, 5/8-in. length, with anchors for sheet rock installation. 15,8 mm WARNING Insecure mounting might damage the ATA or cause injury. Cisco is not responsible for damages incurred by insecure wall-
mounting. 12 Cisco SPA232D Quick Start Guide To mount the unit to the wall:
STEP 1 Determine where you want to mount the unit. Verify that the surface is smooth, flat, dry, and sturdy. STEP 2 Drill two pilot holes into the surface 58 mm apart (about 2.28 in.). Make sure that the holes are at the same height above the floor so that the unit is level and secure in either of its two safety-certified orientations. STEP 3 Insert a screw into each hole, leaving a gap of 5 mm (0.1968 in.) between the underside of each screw head and the surface of the wall. STEP 4 Place the unit wall-mount slots over the screws and slide the unit down until the screws fit snugly into the wall-mount slots. Cisco SPA232D Quick Start Guide 13 Where to Go From Here 7 Support Cisco Small Business Support Community Cisco Small Business Support and Resources Cisco Small Business Firmware Downloads www.cisco.com/go/smallbizsupport www.cisco.com/go/smallbizhelp www.cisco.com/go/software Cisco Small Business Open Source Requests www.cisco.com/go/smallbiz_opensource_ request Product Documentation Cisco Small Business Analog Telephone Adapters Cisco Small Business Cisco Partner Central for Small Business
(Partner Login Required) Cisco Small Business Home www.cisco.com/go/smallbizvoicegateways www.cisco.com/web/partners/sell/smb www.cisco.com/smb 14 Cisco SPA232D Quick Start Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Small Business Support, Global: www.cisco.com/go/sbsc Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) 2012 Cisco Systems, Inc. All rights reserved. Guide de dmarrage rapide Adaptateur de terminal analogique Cisco SPA232D Mobility Enhanced Contenu du colis Adaptateur de terminal analogique Cble Ethernet Cble tlphonique Adaptateur secteur Guide de dmarrage rapide CD-ROM du produit Bienvenue Merci d'avoir choisi l'adaptateur de terminal analogique Cisco SPA232D Mobility Enhanced. Ce guide explique comment installer physiquement le matriel et commencer la configuration de l'adaptateur de terminal analogique. Il dcrit galement la procdure d'enregistrement d'un combin sans fil Cisco SPA302D Mobility Enhanced auprs d'un adaptateur Cisco SPA232D intgrant une station de base DECT. Les combins Cisco SPA302D enregistrs auprs du systme Cisco SPA232D permettent de passer et de recevoir des appels par le biais d'un fournisseur de service VoIP (Voix sur IP) et par le systme tlphonique local (via le port LINE). Seuls les combins Cisco SPA302D sont pris en charge par le systme Cisco SPA232D. Avant de commencer 1 Avant de procder l'installation, assurez-vous de disposer du matriel et des services suivants :
Un compte Internet et un compte VoIP actifs ;
Un cble Ethernet pour la connexion votre priphrique rseau haut dbit ;
Un tlphone connecter votre adaptateur de terminal analogique ;
Un cble tlphonique pour connecter votre tlphone ;
Facultatif : un onduleur (UPS) pour fournir une alimentation de secours ;
Facultatif : combins sans fil Cisco SPA302D Mobility Enhanced. 2 Guide de dmarrage rapide du systme Cisco SPA232D Fonctions du produit 2 Panneau suprieur Fonction Annonce Gnrale/
Enregistrement LINE PHONE INTERNET SYSTEM Description Vert fixe : un ou plusieurs combins sont enregistrs. Vert clignotant rapidement : la base est en mode d'enregistrement. Pour activer le mode d'enregistrement, appuyez sur le bouton pendant 7 secondes au moins. Vert clignotant lentement : la base est en mode d'annonce gnrale ou un combin est dcroch. Pour activer le mode d'annonce gnrale afin de localiser un combin, appuyez sur le bouton pendant quelques secondes. Les combins sonnent alors. teint : aucun combin n'est enregistr dans la base. Vert fixe : la ligne est dcroche et connecte au systme tlphonique local. Vert clignotant lentement : la ligne est dcroche. teint : le port n'est pas prt. Vert fixe : le priphrique est raccroch et enregistr auprs d'un proxy SIP. Vert clignotant lentement : le priphrique est dcroch. teint : le port n'est pas prt. Vert clignotant : transmission ou rception de donnes en cours via le port WAN. teint : aucune liaison. Vert fixe : le systme est prt. Vert clignotant lentement : acquisition d'une adresse IP en cours, le cas chant. (L'option DHCP est utilise par dfaut.) Vert clignotant rapidement : mise niveau du micrologiciel en cours. teint : absence d'alimentation ou le systme ne parvient pas dmarrer. Guide de dmarrage rapide du systme Cisco SPA232D 3 Panneau arrire Fonction Bouton RESET
(rinitialisation) LINE (vert) PHONE (gris) ETHERNET
(jaune) Description Ce bouton a deux fonctions :
Redmarrer l'adaptateur de terminal analogique :
appuyez brivement (moins d'une seconde) sur le bouton l'aide d'un trombone ou d'un objet similaire. Restaurer les paramtres d'usine par dfaut :
appuyez sur le bouton et maintenez-le enfonc pendant 10 secondes. Permet la connexion une ligne tlphonique analogique l'aide d'un cble tlphonique RJ-11. Permet la connexion un tlphone analogique l'aide d'un cble tlphonique RJ-11. Permet la connexion un priphrique de votre rseau local (LAN), tel qu'un ordinateur, l'aide d'un cble Ethernet. INTERNET (bleu) Permet la connexion un priphrique rseau haut dbit (modem DSL ou cble) ou un routeur rseau l'aide d'un cble Ethernet. Permet de connecter le systme un bloc d'alimentation l'aide de l'adaptateur fourni. Bouton POWER
(alimentation) Paramtres par dfaut Valeur par dfaut admin Paramtre Administrator Username (nom d'utilisateur de l'administrateur) Administrator Password (mot de passe de l'administrateur) User Username (nom d'utilisateur) cisco User Password (mot de passe cisco utilisateur) Internet Connection Type (type de connexion Internet) admin Automatic Configuration - DHCP
(configuration automatique - DHCP) 4 Guide de dmarrage rapide du systme Cisco SPA232D Paramtre LAN IP Address
(adresse IP LAN ; galement l'adresse de l'utilitaire de configuration Web). DHCP Range
(plage DHCP ; le serveur DHCP est activ par dfaut). Netmask (masque rseau) PIN for handset registration, IP settings, and SIP settings (code PIN d'enregistrement des combins, paramtres IP et paramtres SIP) Valeur par dfaut 192.168.15.1 192.168.15.100-149 255.255.255.0 Vide Connexion de l'quipement 3 REMARQUE Pour obtenir des instructions de montage mural, reportez-
vous la section Informations supplmentaires, page 9. TAPE1 Connectez le cble Ethernet fourni au port INTERNET (bleu). Connectez l'autre extrmit du cble directement votre priphrique rseau haut dbit. TAPE2 Connectez le cble tlphonique fourni au port PHONE 1 (gris). Connectez l'autre extrmit du cble votre tlphone analogique ou votre tlcopieur. TAPE3 Connectez un cble rseau Ethernet au port ETHERNET (jaune) de l'adaptateur de terminal analogique (facultatif). Connectez l'autre extrmit du cble un priphrique de votre rseau, tel qu'un ordinateur. TAPE4 Connectez une ligne tlphonique analogique au port LINE (vert) pour connecter l'adaptateur de terminal analogique votre systme tlphonique local. TAPE5 Connectez l'adaptateur secteur fourni au port POWER. L'unit se met sous tension. Guide de dmarrage rapide du systme Cisco SPA232D 5 6 5 7 9 3 2 WAN 4 Configuration et gestion de l'adaptateur de terminal analogique Pour configurer votre adaptateur de terminal analogique, vous pouvez utiliser l'utilitaire de configuration Web. Vous pouvez galement utiliser le systme de rponse vocale interactive (IVR) intgr. (Reportez-vous la section Utilisation du systme IVR pour l'administration, page 9.) TAPE1 Connectez le cble rseau Ethernet fourni au port ETHERNET
(jaune) de l'adaptateur de terminal analogique. Connectez l'autre extrmit du cble au port Ethernet de votre ordinateur. TAPE2 Mettez votre ordinateur sous tension. REMARQUE : vrifiez que l'adaptateur Ethernet de votre ordinateur est configur pour obtenir une adresse IP automatiquement (DHCP). Pour en savoir plus, reportez-vous la rubrique d'aide de votre systme d'exploitation. TAPE3 Ouvrez un navigateur Web sur votre ordinateur. 6 Guide de dmarrage rapide du systme Cisco SPA232D TAPE4 Dans la barre d'adresse, saisissez l'adresse suivante :
192.168.15.1 Remarque : 192.168.15.1 est l'adresse IP locale par dfaut de l'adaptateur de terminal analogique. TAPE5 Lors de la premire connexion, saisissez le nom d'utilisateur par dfaut (admin) et le mot de passe par dfaut (admin). Le mot de passe doit respecter la casse. REMARQUE : les comptes d'utilisateurs offrent un accs limit aux paramtres et aux pages lies l'tat. Pour vous connecter en tant qu'utilisateur, saisissez cisco dans les champs de nom d'utilisateur et de mot de passe. TAPE6 Utilisez la page Quick Setup (configuration rapide) pour enregistrer vos comptes VoIP dans les champs Line1 (ligne1) et DECT Line1 (ligne1 DECT). Votre service VoIP peut ne ncessiter que quelques paramtres de base pour permettre l'enregistrement du systme Cisco SPA232D. La page Quick Setup offre un raccourci vers les paramtres de base. Pour obtenir une liste plus complte des paramtres, choisissez le menu Voice (voix), puis les liens de l'arborescence de navigation. Enter Proxy (saisir un proxy) : saisissez le nom de domaine ou l'URL du serveur proxy du fournisseur de service. Display Name (nom d'affichage) : saisissez le nom de l'entreprise. Ce nom est gnralement utilis en tant qu'ID d'appel. User ID (ID utilisateur) : saisissez l'ID utilisateur de votre compte Internet associ ce fournisseur de service. Password (mot de passe) : saisissez le mot de passe de votre compte Internet. Dial Plan (Line 1 only) (plan de numrotation (ligne 1 uniquement)) : Gardez la valeur par dfaut (recommande). Pour plus d'informations sur les paramtres de plan de numrotation, reportez-vous l'aide en ligne et au guide d'administration. Remarque : le systme Cisco SPA232D affecte DECT Ligne1 en tant que ligne par dfaut pour les appels sortant des combins Cisco SPA302D. Si ncessaire, vous pouvez configurer des comptes VoIP supplmentaires en tant que DECT Lines . Guide de dmarrage rapide du systme Cisco SPA232D 7 Pour ce faire, choisissez le menu Voice, puis les liens DECT Line 1~10 (ligne1~10 DECT) dans l'arborescence. Utilisez les cases cocher de la page Quick Setup pour associer la ou les lignes DECT aux combins correspondants. TAPE7 Cliquez sur Submit (enregistrer) pour enregistrer vos paramtres. TAPE8 Si vous souhaitez modifier le code PIN d'enregistrement des combins, ouvrez la page Voice > System (voix > systme), puis saisissez jusqu' quatre chiffres dans le champ IVR Admin Password (mot de passe d'administrateur IVR). Cliquez sur Submit
(enregistrer) pour enregistrer vos paramtres. Pour en savoir plus, reportez-vous l'aide en ligne ou au guide d'administration. (Les liens vers la documentation technique sont fournis sous la rubrique Problmes et solutions, page 15.) 5 Enregistrement d'un combin Cisco SPA302D Vous pouvez enregistrer combins Cisco SPA302D dans la station de base DECT intgre. Ces combins peuvent tre achets sparment. TAPE 1 Installez le Cisco SPA302D. Pour plus d'informations, reportez-
vous au Guide de dmarrage rapide du systme Cisco SPA302D. TAPE 2 Sur le combin Cisco SPA302, appuyez sur la touche centrale de slection du clavier de navigation quadridirectionnel. TAPE3 l'aide des flches de navigation, faites dfiler jusqu'
l'icne des paramtres et appuyez sur la touche centrale de navigation pour la slectionner. TAPE4 Slectionnez Enregistrement du combin. TAPE 5 Slectionnez Enregistrer. TAPE 6 Sur le systme Cisco SPA232D, maintenez le bouton d'annonce gnrale/enregistrement enfonc pendant au moins sept secondes, jusqu' ce que le voyant vert clignote rapidement. 8 Guide de dmarrage rapide du systme Cisco SPA232D Astuce: si vous appuyez sur le bouton pendant moins de sept secondes, le voyant d'tat vert clignote lentement, pour indiquer que le systme est en mode d'annonce gnrale et non en mode d'enregistrement. L'enregistrement ne pourra pas se faire si le systme est en mode d'annonce gnrale. TAPE 7 Le code PIN par dfaut est vierge. Il n'est donc pas ncessaire de saisir un code PIN. Appuyez sur la touche gauche pour confirmer que vous souhaitez enregistrer le combin. Le message Inscription s'affiche. TAPE8 Pour vrifier que le combin est enregistr par la station de base, vrifiez que l'icne de force du signal est allume (et ne clignote pas) et que l'ID du combin (Combin 1 ou Combin 2) apparat en haut droite de l'cran du combin. Informations supplmentaires 6 Utilisation du systme IVR pour l'administration Un systme de rponse vocale interactive (IVR) est disponible pour vous aider configurer et grer votre adaptateur de terminal analogique. Vous pouvez utiliser le clavier du tlphone pour slectionner les options et pour saisir vos informations. Pour accder au menu IVR :
TAPE1 Connectez un tlphone analogique au port PHONE de l'adaptateur de terminal analogique. TAPE2 Appuyez quatre fois sur la touche toile : ****
TAPE3 Aprs le message d'accueil, appuyez sur les touches du clavier de votre tlphone pour slectionner vos options. TAPE4 Saisissez le code correspondant l'action souhaite. Reportez-
vous au tableau Actions IVR pour en savoir plus. Guide de dmarrage rapide du systme Cisco SPA232D 9 ASTUCES :
Saisissez le code lentement et attendez la confirmation audio entre chaque chiffre. Aprs avoir slectionn une option, appuyez sur la touche # (dise). Pour quitter le menu, raccrochez le tlphone ou saisissez le code 3948#. Lorsque vous avez saisi une valeur telle qu'une adresse IP, appuyez sur la touche # (dise) pour indiquer que votre slection est termine. Pour enregistrer le nouveau paramtre, appuyez sur 1. Pour afficher le nouveau paramtre, appuyez sur 2. Ressaisissez le nouveau paramtre en appuyant sur 3. Pour annuler votre saisie et revenir au menu principal, appuyez sur la touche * (toile). Au cours de la saisie d'une valeur, vous pouvez annuler les modifications en appuyant deux fois sur la touche * (toile) en une demi-
seconde. Appuyez rapidement sur la touche pour viter que l'toile (*) soit considre comme un sparateur dcimal. Si le menu est inactif pendant plus d'une minute, l'adaptateur de terminal analogique expire. Vous devrez alors entrer nouveau dans le menu en appuyant quatre fois sur la touche toile : ****. Vos paramtres sont appliqus lorsque vous raccrochez le tlphone ou quittez le systme IVR. ce moment, l'adaptateur de terminal analogique peut redmarrer. Pour saisir les sparateurs dcimaux dans une adresse IP, appuyez sur la touche * (toile). Par exemple, pour saisir l'adresse IP 191.168.1.105, procdez comme suit :
Appuyez sur les touches suivantes : 191*168*1*105. Appuyez sur la touche # (dise) pour indiquer que la saisie de l'adresse IP est termine. Appuyez sur 1 pour enregistrer l'adresse IP ou sur la touche *
(toile) pour annuler votre saisie et revenir au menu principal. 10 Guide de dmarrage rapide du systme Cisco SPA232D Actions IVR Actions IVR Entrer dans le menu IVR Vrifier le type de connexion Internet Dfinir le type de connexion Internet Vrifier l'adresse IP Internet
(port WAN) Dfinir l'adresse IP statique
(WAN) Options du menu
****
100 101 110 111 Vrifier le masque rseau Dfinir le masque rseau 120 121 Vrifier l'adresse IP de la passerelle 130 Choix et instructions DHCP : 0 IP statique : 1 PPPoE : appuyez sur 2. Saisissez l'adresse IP l'aide des touches numriques du clavier tlphonique. Utilisez la touche * (toile) pour saisir un sparateur dcimal. Remarque : cette option est disponible uniquement si vous avez choisi le type de connexion Internet IP statique via l'option101. Pour saisir la valeur, appuyez sur les chiffres correspondants du clavier tlphonique. Appuyez sur la touche * (toile) pour saisir un sparateur dcimal. Remarque : cette option est disponible uniquement si vous avez choisi le type de connexion Internet IP statique via l'option101. Guide de dmarrage rapide du systme Cisco SPA232D 11 Actions IVR Dfinir l'adresse IP de la passerelle Options du menu 131 Vrifier l'adresse MAC Vrifier la version du micrologiciel Vrifier le paramtre du serveur DNS principal Dfinir le serveur DNS principal 140 150 160 161 Choix et instructions Pour saisir la valeur, appuyez sur les chiffres correspondants du clavier tlphonique. Appuyez sur la touche * (toile) pour saisir un sparateur dcimal. Remarque : cette option est disponible uniquement si vous avez choisi le type de connexion Internet IP statique via l'option101. Pour saisir la valeur, appuyez sur les chiffres correspondants du clavier tlphonique. Appuyez sur la touche * (toile) pour saisir un sparateur dcimal. Remarque : cette option est disponible uniquement si vous avez choisi le type de connexion Internet IP statique via l'option101. Vrifier le port du serveur Web Internet SPA122 uniquement : vrifier l'adresse IP du LAN (port Ethernet) Vrifier le transport SIP de la ligne 1 Dfinir le transport SIP de la ligne 1 170 210 1910 1911 Vrifier le transport SIP de la ligne 2 1920 0 : UDP 1 : TCP 2 : TLS 12 Guide de dmarrage rapide du systme Cisco SPA232D Actions IVR Dfinir le transport SIP de la ligne 2 Options du menu 1921 Quitter le menu IVR Autoriser ou empcher l'accs WAN au serveur Web d'administration 3948 7932 Choix et instructions 0 : UDP 1 : TCP 2 : TLS 1 : activer 0 : dsactiver Le systme autorisera l'accs WAN seulement si le nom d'utilisateur et le mot de passe de l'administrateur ont t modifis dans l'utilitaire de configuration. Restaurer les paramtres d'usine ATTENTION : tous les paramtres seront perdus, sauf les paramtres par dfaut. Les donnes relatives au rseau et au fournisseur de service seront donc perdues. Redmarrer le systme vocal 73738 RESET 732668 REBOOT l'invite, appuyez sur 1 pour confirmer ou sur * (toile) pour annuler. Aprs l'annonce Option successful (option applique), raccrochez le tlphone. L'adaptateur de terminal analogique redmarre. Aprs l'annonce Option successful (option applique), raccrochez le tlphone. L'adaptateur de terminal analogique redmarre. Montage de l'adaptateur de terminal analogique Vous pouvez choisir d'installer l'adaptateur de terminal analogique plat sur un bureau ou de le fixer au mur. AVERTISSEMENT Pour viter tout risque de surchauffe de l'adaptateur de terminal analogique, ne l'utilisez pas dans les lieux o la temprature ambiante dpasse 40 C. Guide de dmarrage rapide du systme Cisco SPA232D 13 Installation sur un bureau Placez l'adaptateur de terminal analogique sur une surface plane, proximit d'une prise lectrique. ATTENTION Ne posez aucun objet sur l'adaptateur de terminal analogique, toute charge excessive risquerait de l'endommager. Montage mural Le panneau infrieur de l'adaptateur de terminal analogique comporte deux orifices de montage mural. Pour monter l'adaptateur de terminal analogique contre un mur, vous aurez besoin de matriel supplmentaire (non fourni). Nous vous suggrons d'utiliser le matriel illustr ci-aprs (l'chelle n'est pas respecte). Matriel recommand (non inclus) : deux vis autotaraudeuses tte cylindrique large n 6, d'une longueur de 5/8 pouce (15,8 mm), avec des brides d'ancrage pour l'installation dans des plaques de pltre. 15,8 mm ATTENTION Tout montage non conforme peut endommager l'adaptateur de terminal analogique ou entraner des blessures. Cisco ne peut en aucun cas tre tenu responsable de tout dommage dcoulant d'un montage mural non conforme. Pour procder au montage mural de l'adaptateur :
TAPE1 Dterminez l'endroit o vous souhaitez l'installer. Assurez-vous que la surface est lisse, plane, sche et solide. TAPE2 Percez deux trous pilotes loigns de 58 mm (environ 2,28 pouces) dans la surface. Assurez-vous que les trous sont la mme distance du sol pour que l'adaptateur soit bien droit, puis fixez-le dans l'une des deux positions de scurit certifies. TAPE3 Insrez une vis dans chaque trou, en laissant un espace d'au moins 5 mm (0,1968 pouce) entre la face infrieure de la tte de vis et la surface du mur. TAPE4 Placez les logements de montage mural de l'adaptateur sur les vis, puis faites glisser l'unit vers le bas jusqu' introduire doucement les ttes de vis dans ces logements. 14 Guide de dmarrage rapide du systme Cisco SPA232D Problmes et solutions 7 Assistance Communaut d'assistance Cisco Small Business Assistance et ressources Cisco Small Business Tlchargements de micrologiciels Cisco Small Business Requtes Open Source Cisco Small Business Documentation sur les produits Adaptateurs de terminal analogique Cisco Small Business Cisco Small Business Cisco Partner Central pour Small Business
(Identification partenaire obligatoire) Accueil Cisco Small Business www.cisco.com/go/smallbizsupport www.cisco.com/go/smallbizhelp www.cisco.com/go/software www.cisco.com/go/
smallbiz_opensource_request www.cisco.com/go/smallbizvoicegateways www.cisco.com/web/partners/sell/smb www.cisco.com/smb Guide de dmarrage rapide du systme Cisco SPA232D 15 Sige social pour les Amriques Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 tats-Unis www.cisco.com Assistance internationale aux petites entreprises :
www.cisco.com/go/sbsc 78-20139-01 Cisco et le logo Cisco sont des marques commerciales ou des marques dposes de Cisco et/ou de ses filiales aux tats-Unis et dans d'autres pays. Pour consulter la liste des marques commerciales de Cisco, rendez-vous sur : www.cisco.com/go/trademarks. Les autres marques commerciales mentionnes sont la proprit de leurs dtenteurs respectifs. L'utilisation du terme partenaire n'implique pas de relation de partenariat entre Cisco et une autre socit. (1110R) 2012 Cisco Systems, Inc. Tous droits rservs. Printed in China PRC Imprim en Rpublique populaire de Chine 78-20139-01 FCC Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is equipment and receiving antenna. Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected receiving the interference). Reorient or relocate and increase the separation between the telecommunications FCC RF Radiation Exposure Statement The installation of the base unit should allow at least 20 centimeter between the base and persons to be in compliance with FCC RF exposure guidelines. For body worn operation, the portable part (handset) has been tested and meets FCC RF exposure guidelines. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CANADIAN REPRESENTATIVE & ADDRESS:
Cisco Systems Canada Co 100 Middlefield Road, Toronto, Ontario, M1S 4M6, CANADA TEL.:416-321-7646 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-08-08 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-08-08
|
||||
1 | Applicant's complete, legal business name |
Cisco Systems Inc
|
||||
1 | FCC Registration Number (FRN) |
0004968939
|
||||
1 | Physical Address |
125 West Tasman Drive
|
||||
1 |
San Jose, California 95134-1706
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
LDK
|
||||
1 | Equipment Product Code |
SPA232D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
G******** T******
|
||||
1 | Title |
Manager, Engineering
|
||||
1 | Telephone Number |
408-5********
|
||||
1 | Fax Number |
408-5********
|
||||
1 |
g******@cisco.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PUB - Part 15 Unlicensed PCS Base Station | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | MOBILITY ENHANCED ATA | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Electronics Testing Center, Taiwan
|
||||
1 | Name |
W****** T******
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
w******@etc.org.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 68 | 1921.53600000 | 1928.44800000 | 0.0750000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC