all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Users Manual | Users Manual | 1.01 MiB | February 16 2022 / August 16 2022 | delayed release | ||
1 2 3 |
|
Internal Photos | Internal Photos | 4.25 MiB | February 16 2022 / August 16 2022 | delayed release | ||
1 2 3 |
|
External Photos | External Photos | 3.19 MiB | February 16 2022 / August 16 2022 | delayed release | ||
1 2 3 |
|
ID Label/Location Info | ID Label/Location Info | 176.57 KiB | February 16 2022 / February 18 2022 | |||
1 2 3 | Block Diagram | Block Diagram | February 16 2022 | confidential | ||||
1 2 3 |
|
Declaration of authorization | Cover Letter(s) | 239.87 KiB | February 16 2022 / February 18 2022 | |||
1 2 3 |
|
MPE | RF Exposure Info | 196.63 KiB | February 16 2022 / February 18 2022 | |||
1 2 3 | Operational Description | Operational Description | February 16 2022 | confidential | ||||
1 2 3 | Part list (BOM) | Parts List/Tune Up Info | February 16 2022 | confidential | ||||
1 2 3 | Schematics | Schematics | February 16 2022 | confidential | ||||
1 2 3 |
|
Test Report DSS | Test Report | 1.90 MiB | February 16 2022 / February 18 2022 | |||
1 2 3 |
|
Test Setup Photos | Test Setup Photos | 1.19 MiB | February 16 2022 / August 16 2022 | delayed release | ||
1 2 3 |
|
confidentiality | Cover Letter(s) | 91.16 KiB | February 16 2022 / February 18 2022 | |||
1 2 3 | BOM | Parts List/Tune Up Info | February 16 2022 | confidential | ||||
1 2 3 |
|
DTS UNII Device Declaration Letter | Cover Letter(s) | 46.90 KiB | February 16 2022 / February 18 2022 | |||
1 2 3 | Operation Description for software security | Operational Description | February 16 2022 | confidential | ||||
1 2 3 |
|
Test Report DFS Slave | Test Report | 794.85 KiB | February 16 2022 / February 18 2022 | |||
1 2 3 |
|
Test Report RLAN Band 1-4 | Test Report | 3.87 MiB | February 16 2022 / February 18 2022 | |||
1 2 3 |
|
Test Report BLE | Test Report | 1011.57 KiB | February 16 2022 / February 18 2022 | |||
1 2 3 |
|
Test Report WLAN | Test Report | 1.98 MiB | February 16 2022 / February 18 2022 |
1 2 3 | Users Manual | Users Manual | 1.01 MiB | February 16 2022 / August 16 2022 | delayed release |
REVIEWDRAFT-CISCOCONFIDENTIAL Cisco Video Phone 8875 Documentation First Published: 2021-11-18 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense. The following information is for FCC compliance of Class B devices: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by using one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCBs public domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED "AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other gures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental. All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version. Cisco has more than 200 ofces worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/ofces. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its afliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R) 2021 Cisco Systems, Inc. All rights reserved. C O N T E N T S C H A P T E R 1 Get Started 1 C H A P T E R 2 Calls 19 Your Cisco Video Phone 8875 1 Hardware and buttons 2 Connect your phone 5 Wired Network 5 Wireless Network 7 Wall Mount 9 Non-Lockable Wall Mount Components 9 Install the Non-Lockable Wall Mount Kit for Phone 10 Remove the Phone from the Non-Lockable Wall Mount 15 Adjust the Handset Rest 16 Calls 19 Make a Call 19 Single Line 19 Multiple Lines 19 Make an Emergency Call 20 Answer a call 20 Single incoming call 21 Multiple incoming calls 21 Put a call on hold 21 Silence the incoming call ring 22 Mute yourself during calls and meetings 22 Adjust audio volume 23 Switch the phone audio path 24 Cisco Video Phone 8875 Documentation iii Contents REVIEWDRAFT-CISCOCONFIDENTIAL Swap between active and held calls 25 C H A P T E R 3 Meetings 27 Meetings 27 Join a meeting on your phone 27 Turn your video stream on or off 28 C H A P T E R 4 Contacts 29 C H A P T E R 5 Settings 33 Contacts 29 Search for a Contact 29 Add a ontact to Favorites 30 Add a Contact to Your Personal Directory 30 Directories 30 Recents 31 Dialing 31 Edit a Contact 31 Settings 33 Set time zone and time format 33 Change language on your phone 34 Connect to a Wi-Fi network 35 Connect a Bluetooth headset to your phone 35 Unpair a Bluetooth headset 36 Set phone ringtone and volume 36 Restart your phone 37 Reset your phone to the factory settings 37 C H A P T E R 6 Product Safety and Security 39 Safety and Performance Information 39 Power Outage 39 Regulatory Domains 39 External Devices 39 Bluetooth Wireless Headset Performance 40 Cisco Video Phone 8875 Documentation iv Contents REVIEWDRAFT-CISCOCONFIDENTIAL Ways to Provide Power to Your Phone 40 Phone Behavior During Times of Network Congestion 40 UL Warning 40 EnergyStar 41 Class 1 Power Product Label 41 41 Compliance Statements 41 Compliance Statements for the European Union 41 CE Marking 41 RF Exposure Statement for the European Union 41 Compliance Statements for the USA 42 Part 15 Radio Device 42 Compliance Statements for Canada 42 Canadian RF Exposure Statement 42 Canadian High-Power Radars Statement 43 FCC Compliance Statements 43 FCC Part 15.19 Statement FCC Part 15.21 Statement 43 43 FCC RF Radiation Exposure Statement 43 FCC Receivers and Class B Digital Statement 43 Cisco Product Security Overview 44 Cisco Circular Economy 44 Important Online Information 45 Cisco Video Phone 8875 Documentation v Contents REVIEWDRAFT-CISCOCONFIDENTIAL Cisco Video Phone 8875 Documentation vi C H A P T E R 1 Get Started Your Cisco Video Phone 8875, on page 1 Hardware and buttons, on page 2 Connect your phone, on page 5 Your Cisco Video Phone 8875 Cisco Video Phone 8875 is a video phone with a high-denition camera and a touch screen, and designed for video calls and meetings in work ofces and home ofces. Cisco Video Phone 8875 Documentation 1 Hardware and buttons Get Started REVIEWDRAFT-CISCOCONFIDENTIAL Hardware and buttons Your phone has several buttons and hardware features that allow you access to the phone features. Use the following gures to identify the phone buttons and hardware items. Figure1:CiscoVideoPhone8875frontview Table1:Hardwareandbuttonsonthefront Hardware Feature Purpose 1. Handset and Handset light strip Indicates call states:
Indicates whether you have an incoming call (ashing red) or a new voice message (steady red). 2. Camera The high-denition camera with a physical shutter and a vertically adjustable hinge. Use the camera for video calls 3. Touch screen The LCD touch-screen (6.7 in, 1920 x 1080 resolution) Use the touch screen to use and congure the phone features. 4. Webex Assistant button Press it to invoke Webex Assistant. Cisco Video Phone 8875 Documentation 2 Get Started Hardware and buttons REVIEWDRAFT-CISCOCONFIDENTIAL Hardware Feature Purpose 5. Hold/Resume, Conference, and Transfer Hold/Resume call.
: Place an active call on hold and resume the held Conference
: Create a conference call. Transfer
: Transfer a call. 6. Headset, Speakerphone, and Mute Headset
: Toggle the headset on. When the headset is on, the button lights up. To leave headset mode, you pick up the handset or select Speakerphone
. Speakerphone speakerphone is on, the button lights up.
: Toggle the speakerphone on or off. When the Mute is muted, the button lights up.
: Toggle the microphone on or off. When the microphone 7. Alphanumeric keypad Use the keypad to input characters. 8. Messages, Settings, and Contacts Messages
: Press it to dial your voice messaging system. Settings
: Access the settings menu. Contacts
: Access directories and favorite contacts list. 9. Volume button
: Adjust the handset, headset, and speakerphone volume
(off hook), and the ringer volume (on hook). Cisco Video Phone 8875 Documentation 3 Hardware and buttons Figure2:
REVIEWDRAFT-CISCOCONFIDENTIAL Get Started Table2:Portsonthebackofthephone Description Port 1. Power port 2. USB-C port 3. Ethernet port 4. PC port Connect the shipped AC adapter to this port to power up your phone. Connect your USB-C headset to this port. Connect this port to your Ethernet port on the wall or on your router with the shipped Ethernet cable. Used for getting network connection from your laptop or another IP phone. 5. Auxiliary port Connect your AUX headset to this port. 6. Analog headset port Connect your RJ-9 headset to this port. 7. Cable sockets 8. Handset port Used for holding the analog headset cable and the handset cable. Connect your handset to this port with the shipped handset cable. Cisco Video Phone 8875 Documentation 4 Get Started Connect your phone REVIEWDRAFT-CISCOCONFIDENTIAL Figure3:CiscoVideoPhone8875right-sideview Table3:Portsonthephonerightside Port 1. USB-A port 2. Footstand Description Connect your USB-A headset to this port. Supports your phone standing on a desk. 3. Power button Press it to turn on or off your phone. Connect your phone Draft comment: The content in this section is subject to change as the development proceeds. Get your phone ready by installing the components and connect to network and power. We offer an optional wall mount kit (product ID: CP-8800-WMK) if you want to mount your phone on the wall. Wired Network This section is for phone installation in a wired network. Cisco Video Phone 8875 Documentation 5 Wired Network Get Started REVIEWDRAFT-CISCOCONFIDENTIAL Your phone supports Power over Ethernet (PoE). If your network supports PoE, an Ethernet connection powers up your phone and connects it to the network. You don't have to connect the shipped power adapter. Procedure Step 1 Connect the shipped handset to the handset port. Step 2 Connect your phone to the network with the shipped Ethernet cable. Cisco Video Phone 8875 Documentation 6 Get Started Wireless Network REVIEWDRAFT-CISCOCONFIDENTIAL Step 3 Install the footstand. For you to easily read the screen and eliminate glare on the screen, adjust the footstand to change the phone to a proper angle. Wireless Network Procedure Follow the steps in this article to connect your Cisco Video Phone 8875 in a wireless network. Step 1 Connect the shipped handset to the handset port. Cisco Video Phone 8875 Documentation 7 Wireless Network Get Started REVIEWDRAFT-CISCOCONFIDENTIAL Step 2 Connect your phone to a power socket with the shipped power adapter. Step 3 Insert the footstand to the slots on the back of the phone. Cisco Video Phone 8875 Documentation 8 Get Started Wall Mount REVIEWDRAFT-CISCOCONFIDENTIAL If needed, rotate the footstand to adjust the phone to a proper angle. Step 4 Connect your phone to a wireless network. For information about how to connect to a wireless network, see Connect to a Wi-Fi network, on page 35. Wall Mount Non-Lockable Wall Mount Components This section describes how to install the Cisco IP Phone 8800 Series Wall Mount Kit. The following gure shows the components of the Cisco IP Phone 8800 Series Wall Mount Kit. Figure4:Components Cisco Video Phone 8875 Documentation 9 Install the Non-Lockable Wall Mount Kit for Phone Get Started REVIEWDRAFT-CISCOCONFIDENTIAL The package contains the following items:
One phone bracket One wall bracket Two K30x8mm self-tapping screws One 6-inch Ethernet cable Four #8-18 x 1.25-inch Phillips-head screws with four anchors The following gure shows the wall mount kit installed on the phone. Figure5:BackviewofWallMountKitInstalledonPhone The following gure shows the phone with the wall mount kit from the side. Figure6:SideViewofWallMountKitInstalledonPhone Install the Non-Lockable Wall Mount Kit for Phone The wall mount kit can be mounted on most surfaces, including concrete, brick, and similar hard surfaces. To mount the kit on concrete, brick, or similar hard surfaces, you must provide the appropriate screws and anchors for your wall surface. Cisco Video Phone 8875 Documentation 10 Get Started Install the Non-Lockable Wall Mount Kit for Phone REVIEWDRAFT-CISCOCONFIDENTIAL Before you begin You need these tools to install the bracket:
#1 and #2 Phillips-head screwdrivers Level Pencil Procedure You must also install an Ethernet jack for the telephone in the desired location if an Ethernet jack does not currently exist. This jack must be wired appropriately for an Ethernet connection. You cannot use a regular telephone jack. Step 1 Mount the wall bracket in the desired location. You can install the bracket over an Ethernet jack, or you can run the Ethernet network cable to a nearby jack. Note If the jack is to be placed behind the phone, the Ethernet jack must be ush to the wall or recessed. a) Hold the bracket on the wall, placing it so that the arrow on the back of the bracket is pointing up. b) Use the level to ensure that the bracket is level and use a pencil to mark the screw holes. c) Using a #2 Phillips-head screwdriver, carefully center the anchor over the pencil mark and press the anchor into the wall. d) Screw the anchor clockwise into the wall until it is seated ush. e) Use the included screws and a #2 Phillips-head screwdriver to attach the bracket to the wall. Cisco Video Phone 8875 Documentation 11 Install the Non-Lockable Wall Mount Kit for Phone Get Started REVIEWDRAFT-CISCOCONFIDENTIAL Figure7:BracketInstallation The following gure shows the bracket installation steps. Step 2 Attach the phone bracket to the IP Phone. a) Detach power cord, and any other attached cords from the base of the phone, except the handset cord (and headset cord, if there is a headset). b) Attach the phone bracket by inserting the tabs into the mounting tabs on the back of the phone. The phone ports should be accessible through the holes in the bracket. c) Secure the phone bracket to the IP phone with the self-tapping screws, using the #1 Phillips-head screwdriver. d) Reattach the cords and seat them in the clips that are incorporated into the phone body. Cisco Video Phone 8875 Documentation 12 Get Started Install the Non-Lockable Wall Mount Kit for Phone REVIEWDRAFT-CISCOCONFIDENTIAL Figure8:AttachPhoneBracket The following gure shows how the bracket attaches to the phone. Step 3 Attach the cables to the phone:
a) Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack. b)
(Optional) If you are connecting a network device (such as a computer) to the phone, attach the cable to the 10/100/1000 Computer (PC access) port.
(Optional) If you are using an external power supply, plug the power cord into the phone and dress the cord by clipping it into the clips that are incorporated into the phone body next to the PC port.
(Optional) If the cables terminate inside the wall bracket, connect the cables to the jacks. d) c) Cisco Video Phone 8875 Documentation 13 Install the Non-Lockable Wall Mount Kit for Phone Get Started REVIEWDRAFT-CISCOCONFIDENTIAL Figure9:AttachCables The following gure shows the cables. Step 4 Attach the phone to the wall bracket by inserting the tabs on the top of the wall bracket into the slots on the phone bracket. For cables that terminate outside of the brackets, use the cable-access openings in the bottom of the bracket to position the power cord and any other cable that does not terminate in the wall behind the bracket. The phone and wall bracket openings together form circular openings with room for one cable per opening. Figure10:AttachPhonetoWallBracket The following gure shows how you attach the phone to the wall bracket. Cisco Video Phone 8875 Documentation 14 Get Started Remove the Phone from the Non-Lockable Wall Mount REVIEWDRAFT-CISCOCONFIDENTIAL Step 5 Press the phone rmly into the wall bracket and slide the phone down. The tabs in the bracket click into position. Step 6 Proceed to Adjust the Handset Rest, on page 16. Remove the Phone from the Non-Lockable Wall Mount The wall bracket has two tabs that lock the kit together. Use the following illustration to locate the tabs. Figure11:TabLocation Obtain two Phillips head screwdrivers or other similar devices that have a diameter of 5 millimeters or 3/16ths of an inch. Before you begin Procedure Step 1 Insert a screw driver or other device into the left and right holes in the phone mounting plate. Insert to a depth of about 3/4 of an inch or 2 centimeters. Step 2 Press rmly inwards to disengage the tabs. Cisco Video Phone 8875 Documentation 15 Adjust the Handset Rest Get Started REVIEWDRAFT-CISCOCONFIDENTIAL Figure12:DisengageTabs Step 3 Lift the phone to release it from the wall bracket. Pull the phone toward you. Adjust the Handset Rest If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the handset rest to ensure that the receiver does not slip out of the cradle. Figure13:AdjusttheHandsetRest Procedure Step 1 Step 2 Step 3 Remove the handset from the cradle and pull the plastic tab from the handset rest. Rotate the tab 180 degrees. Hold the tab between two ngers, with the corner notches facing you. Cisco Video Phone 8875 Documentation 16 Get Started Adjust the Handset Rest REVIEWDRAFT-CISCOCONFIDENTIAL Step 4 Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from the top of the rotated tab. Step 5 Return the handset to the handset rest. Cisco Video Phone 8875 Documentation 17 Adjust the Handset Rest Get Started REVIEWDRAFT-CISCOCONFIDENTIAL Cisco Video Phone 8875 Documentation 18 C H A P T E R 2 Calls Calls, on page 19 Calls Make a Call Single Line Draft comment: The content in this section is subject to change as development proceeds. Your phone can have one or multiple lines as your administrator congures. You can either call phone numbers or call contacts from your directories. Procedure Step 1 Do one of the following actions:
Enter the phone number to call with the phone keypad and tap Tap Recents and select a call from the list to call it back. to call the number. Press and enter the contact name in the Search or dial bar to search from the Favorites and Directories. Tap the contact name to call the contact. This feature is available if your administrator congures it. Step 2 Tap End call to nish your call. Multiple Lines You can use a particular line to make calls. The extension displays on the top is your primary line. If you don't select an extension before you dial the number, then the primary line is in use by default. Cisco Video Phone 8875 Documentation 19 Make an Emergency Call Procedure REVIEWDRAFT-CISCOCONFIDENTIAL Step 1 Step 2 Do one of these actions:
On your phone home screen, tap the extension to use. Calls Enter the phone number to call with the phone keypad and tap to call the number. Tap Search or dial to enter the phone number with the soft keypad on the phone screen, and tap to call the number. Tap a call from the Recents list to call it back. Enter a contact's name in the Search or dial bar to search from the Favorites and Directories. Tap the contact name to call the contact. This feature is available if your administrator congures it. Step 3 Tap End call to nish your call. Make an Emergency Call Use your phone to make an emergency call, similar to any other call. When you dial the emergency number, your emergency services get your phone number and location so that they can assist you. Note If your call disconnects, the emergency services can call you back. Your phone must be set up to obtain your physical location. Emergency services personnel need your location to nd you when you make an emergency call. Before you begin Procedure Enter the emergency number and tap
. Answer a call You can answer an incoming call either from the touch screen or using the keys or handset on the phone. If you have a Cisco Headset with the call control feature connected to your phone, you are able to answer a call with its call button. Need help for Cisco Headsets, see Cisco Headsets on Help Center. Cisco Video Phone 8875 Documentation 20 Calls Single incoming call REVIEWDRAFT-CISCOCONFIDENTIAL Single incoming call You can answer an incoming call with the phone handset, the phone speaker, or your connected headset. Procedure Press Note When prompted with an incoming call, do one of the these actions to answer it:
Tap Answer on the phone to answer the call with the pre-specied audio path. Lift the phone handset to answer the call with the handset. to answer a call with the connected headset. If there are more than one headset connected, the last connected one is used as the active audio path. Press to answer a call with the phone speaker. Multiple incoming calls When your phone receives multiple calls at the same time, you can see a call list, where you can answer, decline, or silence the ringer of them. If your phone has multiple lines congured on it, each call entry shows the line number below it helping you identify which line the call is on. Procedure Step 1 Step 2 Tap the call that you want to answer. Do one of the these actions:
Tap Answer on the phone to answer the call with the pre-specied audio path. Lift the phone handset to answer the call with the handset. Press Note to answer a call with the connected headset. If there are more than one headset connected, the last connected one is used as the active audio path. Press to answer a call with the phone speaker. Put a call on hold You can put a call on hold and then resume it when you're ready. When you place a video call on hold, video transmission is blocked until you resume the call. Cisco Video Phone 8875 Documentation 21 Silence the incoming call ring REVIEWDRAFT-CISCOCONFIDENTIAL Calls If you are on a call and receive another call, answering the call automatically puts the active call on hold. You can swap between calls using the call list. Procedure Step 1 Do one of the following actions to hold an active call:
On the phone screen, tap Hold
. Press Step 2 Do one of the following actions to resume a held call:
On the phone screen, tap Resume
. Press
. Silence the incoming call ring If you're busy or you don't want to be disturbed, then you can silence the incoming call ring. The ring volume returns to normal with the next call. Procedure Do one of the following actions when you have an incoming call:
Tap Ignore on the phone screen. Press - (volume down) on
. Mute yourself during calls and meetings On a call or in a meeting, mute the audio while not speaking to avoid distractions to the other participants. When your phone is on mute, you can hear the others, but they can't hear you. When you mute your audio on a video call, your camera continues to transmit video. Procedure Step 1 Press on your phone. Cisco Video Phone 8875 Documentation 22 The Mute key LED turns into red. You see the muted microphone icon on the screen. Calls REVIEWDRAFT-CISCOCONFIDENTIAL Adjust audio volume Step 2 Press again to unmute yourself when you're ready to speak. Adjust audio volume If the sound on your phone is too loud or too soft, you can change the volume when youre on a call or on a meeting. The volume change applies to the currently active audio path, which can be the phone handset, the phone speaker, or your headset. You can check the Home screen header to know the active audio path. See the following table for the audio path status. Table4:AudiopathstatusdisplayedontheHomescreenheader Icon Active audio path Phone handset Phone handset Phone speaker Phone speaker Bluetooth headset Bluetooth headset Wired headset Wired headset Status Active Silenced Active Silenced Active Silenced Active Silenced Procedure Do one of the following actions:
Press - or + on
. Use the volume buttons on your Cisco Headset. Note Only Cisco Headsets are supported to control the phone audio volume. Cisco Video Phone 8875 Documentation 23 Switch the phone audio path REVIEWDRAFT-CISCOCONFIDENTIAL Calls Switch the phone audio path The phone speaker and microphone is the default audio output and input path. You can switch the audio path to the handset or to a connected headset on the phone home screen. You can connect an analog headset, a Bluetooth headset, and a USB headset simultaneously to your phone. However, you can use only one headset at a time. The last connected headset is used as the active headset. If you disconnect the headset in use on an active call, or the headset is out of battery, the call switches to the phone speaker when there's no other headset connected. If you have other headsets connected in this case, the call switches to another headset in this order:
On the phone home screen, the audio path icon shows the audio device in use. You may see one of the following icons:
1. USB headset 2. Bluetooth headset 3. Analog headset connected to the AUX port 4. Analog headset connected to the RJ-9 port Wired headset (USB, RJ-9, or AUX) Handset Speaker Bluetooth headset Procedure Do any of these actions to switch the audio path:
On the phone home screen, tap the audio path icon and select your desired audio path. Note You can't switch audio to the handset on the phone screen. Cisco Video Phone 8875 Documentation 24 Calls REVIEWDRAFT-CISCOCONFIDENTIAL Swap between active and held calls Use the hard keys:
Speaker Headset Pick up the handset to switch audio to the handset. Swap between active and held calls You can see the Call List button on the in-call screen when you have multiple calls. The digit on the Call List button shows the number of calls on your phone. The calls can include the following:
The active call The held calls The incoming calls waiting for pickup Procedure Tap
. Step 1 Step 2 Step 3 Tap the desired call entry to open its in-call screen. Perform the action as needed. Cisco Video Phone 8875 Documentation 25 Swap between active and held calls REVIEWDRAFT-CISCOCONFIDENTIAL Calls Cisco Video Phone 8875 Documentation 26 C H A P T E R 3 Meetings Meetings, on page 27 Meetings Draft comment: The content in this section is subject to change as development proceeds. Your phone is designed to provide inclusive video meeting experience. You can view and join your scheduled Webex meetings on your phone. The following table summarizes the Webex meeting features available on your Cisco Video Phone 8875. Table5:CiscoVideoPhone8875meetingfeatures Feature Selfview Add a call Benefit Tap to toggle your self-view image on or off. Add an active call to the meeting. Noise reduction Enable or disable the Noise Reduction feature. DefaultNoise reduction is disabled. Noise removalFilter out the background noise. Participants Leave Tap to see a list of everyone in your meeting. Tap to leave the meeting. Join a meeting on your phone From your phone, you can join a meeting when it's about to start in 5 minutes or when it's in progress. Youre prompted to join a meeting 5 minutes before it starts. If you dismiss the reminder, you can join the meeting from the Meetings list, which displays your scheduled meetings for the day. Cisco Video Phone 8875 Documentation 27 Turn your video stream on or off Procedure REVIEWDRAFT-CISCOCONFIDENTIAL Meetings Step 1 Tap Join from the meeting notication when prompted. Step 2
(Optional) From your phone home screen, tap and join your meeting from the Meetings list. The digit on the Meetings button shows the number of meetings you have for the rest of the day. Step 3
(Optional) To leave the meeting, tap
. Turn your video stream on or off Use the camera shutter to switch your video stream on or off during a video call or video meeting. When your video is off, the other participants can't see you. Procedure Step 1 Step 2 Step 3 Turn the shutter ring clockwise to turn on your video stream.
(Optional) Slightly rotate the camera up or down to get yourself properly framed in the view. Turn the shutter ring counter-clockwise to turn off your video stream. Cisco Video Phone 8875 Documentation 28 C H A P T E R 4 Contacts Contacts, on page 29 Search for a Contact, on page 29 Add a ontact to Favorites, on page 30 Add a Contact to Your Personal Directory, on page 30 Edit a Contact, on page 31 Contacts Draft comment: The content in this section is subject to change as development proceeds. Contacts are the collection of friends, colleagues, and customers that make up your personal and business world. It's an easy way for you to reach out and call someone without having to nd their contact information. Contacts are organized into corporate and personal directories. The corporate directory is a list of people in your company and can only be edited by your administrator. The personal directory is a list of your personal contacts that you can add, edit, or delete. You can also search for someone in your directories, and mark them as a favorite if they're special. Search for a Contact To locate a contact quickly, search for it in the directories. You can search for a contact by either contact name or phone number. Enter more characters to narrow down the results if youre prompted to do so. Too many results make it difcult for you to locate your desired contact. The phone doesn't show any results if the number of found contacts reaches the maximum limit. Your administrator congures the limit. Procedure Step 1 Step 2 Press
. Tap on the search bar and enter the contact name or the phone number. Note The search starts after you enter three characters on the search bar. Cisco Video Phone 8875 Documentation 29 Add a ontact to Favorites REVIEWDRAFT-CISCOCONFIDENTIAL Step 3 Drag the scroll bar up or down to nd your desired contact from the search results. Contacts Add a ontact to Favorites Make it easy to connect with the people that you often contact. You can add the contacts from your personal address book and corporate directories to favorites. On the contact card, a favorite contact has a star mark on the contact. You can edit the contact information in Favorites. The changes you make on a contact in Favorites aren't applied to the contact information in your personal address book or corporate directories. Procedure Step 1 Step 2 Press
. Find the contact you want to add from your personal or corporate directories. Step 3 Tap to open the contact card. Step 4 Tap to add the contact to favorites. Step 5 To remove the contact from Favorites, tap again. Add a Contact to Your Personal Directory If you have someone who you call often, then you can add them to your personal directory. For example, you have some customers and you need to call them often. Saving their numbers to your personal directory allows you to easily call them or identify incoming or missed calls from them. You can add up to three phone numbers for each contact. For easy access, you can add external contacts from Directories, Recents, or the dialing screen. See the following sections for how to add a contact. Directories Procedure Step 1 Press and select Directories. Step 2 Tap
. Cisco Video Phone 8875 Documentation 30 Contacts Recents REVIEWDRAFT-CISCOCONFIDENTIAL Step 3 Enter the contact name and phone numbers with the onscreen soft keyboard. Step 4 Tap to save the contact. Recents Procedure Step 1 Step 2 Open the Recents list. Locate the phone number that you want to add. Step 3 Tap to open the call details. Step 4 Tap and enter the contact name. Step 5 Tap to save the contact. Dialing Procedure Step 2 Step 3 Tap below the search bar. Enter the contact name. Step 4 Tap to save the contact. Edit a Contact Step 1 On the phone home screen, enter the phone number with the phone keypad. Sometimes, your contacts change their phone numbers or have alternate phone numbers. Edit the contacts in your personal address book to keep the information updated. Your administrator manages the corporate directories. If you want to update the contact information from these directories, add the contacts to Favorites and then edit them there. Your changes in Favorites don't impact the corporate directories. Cisco Video Phone 8875 Documentation 31 Edit a Contact Procedure REVIEWDRAFT-CISCOCONFIDENTIAL Contacts Step 1 Step 2 Press
. Find the contact you want to update from your personal address book or from Favorites. Step 3 Tap to open the contact card. Step 4 Tap and update the information. Step 5 Tap to save your changes. Cisco Video Phone 8875 Documentation 32 C H A P T E R 5 Settings Settings, on page 33 Set time zone and time format, on page 33 Change language on your phone, on page 34 Connect to a Wi-Fi network, on page 35 Connect a Bluetooth headset to your phone, on page 35 Unpair a Bluetooth headset, on page 36 Set phone ringtone and volume, on page 36 Restart your phone, on page 37 Reset your phone to the factory settings, on page 37 Settings Draft comment: The content in this section is subject to change as development proceeds. Customize your phone settings to display your local time and language and have better audio and video experience in calls and meeting. Set time zone and time format The default time zone on your phone is GMT-8:00. Set your time zone to display your local time on the phone. Your phone displays time in 12-hour format by default. You can change it to 24-hour time format, if needed. Procedure Press
. Step 1 Step 2 Step 3 Step 4 Go to the Language and region section. Tap Time settings > Time zone and select your time zone. Tap Time format and select 24-hour or 12-hour time format as you need. Cisco Video Phone 8875 Documentation 33 Change language on your phone REVIEWDRAFT-CISCOCONFIDENTIAL Settings Change language on your phone You can change the language when your phone is not in a call or a meeting. When you change the language settings, the soft keyboard on your device reects that change. This means that you can use the alphabet of your preferred language when you use the keyboard, for example when you search in the directory. Your administrator can deploy specic languages to your phone. If you can't change the language or can't nd your language, contact your administrator. Your phone supports the following languages:
Czech Danish Dutch English French (France) French(Canada) German Hungarian Italian Norwegian Polish Russian Spanish (Spain) Swedish Turkish Portuguese (Portugal) Procedure Press
. Step 1 Step 2 Step 3 Go to the Language and region section. Tap Language, navigate through the list, and select the language for your phone. Cisco Video Phone 8875 Documentation 34 Settings REVIEWDRAFT-CISCOCONFIDENTIAL Connect to a Wi-Fi network Connect to a Wi-Fi network If you work from home, then check your router's speed rating and technical specications. Most wireless routers support up to 250 devices. But with more people working and studying from home, then heavy network trafc can degrade overall performance. A second router dedicated to your home ofce often helps. Limit the number of wireless devices in the same room as the Wi-Fi signals often interfere with each Before you begin Perform the following actions:
Connect your phone to a power source. Get your Wi-Fi network name and password. Disconnect your network cable. other. Procedure Press
. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Scroll down to the Network and service section and tap Wi-Fi. Toggle the Wi-Fi parameter to On. Select your network from the list of available networks. Enter your network password if the network requires authentication. Tap Connect. Connect a Bluetooth headset to your phone You can pair your phone to a Bluetooth also use the headset's call control feature to make or answer calls. headset for hands-free talking. If you use a Cisco headset, you can When your Bluetooth headset is paired with the phone, its the active audio path until you connect another headset or change the audio path. You see that means the phone audio is in silence. on the phone home screen header. If you see on the header, When you use a Bluetooth headset with your phone, keep in mind the following limitations:
Effective signal range varies by headset model. Check with your headset manufacturer for the maximum headset range. For example, you can take the Cisco Bluetooth Headset as far as 30 meters (90 feet) from the device before you experience a dip in signal quality. Your environment may affects your Bluetooth signal quality. Objects such as walls, windows, and desks can reduce your headset range. Cisco Video Phone 8875 Documentation 35 Unpair a Bluetooth headset REVIEWDRAFT-CISCOCONFIDENTIAL Settings Scroll down to the Audio section and tap Bluetooth. Tap the Bluetooth switch to toggle it on. When you see your headset in the list, tap it and tap Connect. Unpair a Bluetooth headset You can disconnect a Bluetooth headset from your phone. The phone automatically saves your headset pairing for later use. Scroll down to the Audio section and tap Bluetooth. Under the device you wish to disconnect, tap Unpair. Set phone ringtone and volume You can specify different ringtones to the lines so that you know which line an incoming call is on, simply by the ringtone. There are xxx preset ringtones on your phone. By default, sunrise is set as the ringtone for all lines. Procedure Press
. Procedure Press
. Procedure Press
. Step 1 Step 2 Step 3 Step 4 Step 1 Step 2 Step 3 Step 1 Step 2 Step 3 Step 4 Scroll down to the Audio section and select Ringtone and volume. Drag the Volume slider left or right to adjust the volume. Select a ringtone for each of your congured line. Cisco Video Phone 8875 Documentation 36 Settings REVIEWDRAFT-CISCOCONFIDENTIAL Restart your phone Restart your phone A phone restart doesn't erase the phone settings. You can restart your phone either from the touch user interface or using the power button. Do one of the following actions to restart your phone:
Procedure Use the touch screen a. Press
. b. Scroll down to the menu list bottom and tap Restart. c. Tap Restart to restart your phone. Use the power button a. Press the power button on the phone right side to power off your phone. b. Wait until the phone screen goes off. Then, press the power button again to power up your phone. Reset your phone to the factory settings A factory reset clears all settings from your phone. You lose your current registration and all the conguration after a factory reset. You must register and set up your phone as you do for a new phone before you can use it. Procedure Press
. Step 1 Step 2 Step 3 Scroll down to the menu list bottom and tap Factory reset. Tap Reset to start the reset. Your phone reboots when the reset completes. Cisco Video Phone 8875 Documentation 37 Reset your phone to the factory settings REVIEWDRAFT-CISCOCONFIDENTIAL Settings Cisco Video Phone 8875 Documentation 38 C H A P T E R 6 Product Safety and Security Safety and Performance Information, on page 39 Compliance Statements, on page 41 Cisco Product Security Overview, on page 44 Cisco Circular Economy, on page 44 Important Online Information, on page 45 Safety and Performance Information Power Outage Your access to emergency service through the phone requires that the phone receive power. If a power interruption occurs, service or emergency calling service dialing does not function until power is restored. If a power failure or disruption occurs, you may need to reset or recongure the equipment before you can use service or emergency calling service dialing. Regulatory Domains External Devices We recommend that you use good-quality external devices that are shielded against unwanted radio frequency
(RF) and audio frequency (AF) signals. External devices include headsets, cables, and connectors. Depending on the quality of these devices and their proximity to other devices, such as mobile phones or two-way radios, some audio noise may still occur. In these cases, we recommend that you take one or more of these actions:
Move the external device away from the source of the RF or AF signals. Route the external device cables away from the source of the RF or AF signals. Use shielded cables for the external device, or use cables with a better shield and connector. Shorten the length of the external device cable. Apply ferrites or other such devices on the cables for the external device. Cisco Video Phone 8875 Documentation 39 Bluetooth Wireless Headset Performance Product Safety and Security REVIEWDRAFT-CISCOCONFIDENTIAL Cisco cannot guarantee the performance of external devices, cables, and connectors. Caution In European Union countries, use only external speakers, microphones, and headsets that are fully compliant with the EMC Directive [89/336/EC]. Bluetooth Wireless Headset Performance Cisco IP Phones support Bluetooth Class 2 technology when the headsets support Bluetooth. Bluetooth enables low-bandwidth wireless connections within a range of 30 feet (10 meters). The best performance is in the 3-
to 6-foot (1- to 2-meter) range. You can connect up to ve headsets, but only the last one connected is used as the default. Because of potential interference issues, we recommend that you move 802.11b/g devices, Bluetooth devices, microwave ovens, and large metal objects away from the wireless headset. The Bluetooth wireless headset does not need to be within direct line-of-sight of the phone. However, some barriers, such as walls or doors, and interference from other electronic devices, can affect theconnection. Ways to Provide Power to Your Phone You can provide power to your phone in one of these ways:
Use the power adapter that comes with your phone. If your network supports Power over Ethernet (PoE), you can plug your phone into the network. Plug an Ethernet cable into the Ethernet phone port and into the network. If you are not sure whether your network supports PoE, check with your administrator. Phone Behavior During Times of Network Congestion Administrative tasks, such as an internal port scan or security scan Attacks that occur on your network, such as a Denial of Service attack UL Warning The LAN/Ethernet cable or other cables attached to the device should not be extended outside of the building. Cisco Video Phone 8875 Documentation 40 REVIEWDRAFT-CISCOCONFIDENTIAL EnergyStar Product Safety and Security EnergyStar Class 1 Power Product Label Class 1 products must be connected to a mains power outlet with protective earthing. The product label is located on the bottom of the device. Compliance Statements Compliance Statements for the European Union CE Marking The following CE mark is afxed to the equipment and packaging. RF Exposure Statement for the European Union This device has been evaluated and found compliant in accordance with EU EMF Directive 2014/53/EU. Cisco Video Phone 8875 Documentation 41 Compliance Statements for the USA Product Safety and Security REVIEWDRAFT-CISCOCONFIDENTIAL Compliance Statements for the USA Part 15 Radio Device Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modication to said product not expressly approved by Cisco, including the use of non-Cisco antennas, could void the users authority to operate this device. Compliance Statements for Canada Canadian RF Exposure Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this phone. This product meets the applicable Innovation, Science and Economic Development Canada technical specications. Avis de Conformit Canadien Cet appareil est conforme aux normes RSS exemptes de licence RSS dIndustry Canada. Le fonctionnement de cet appareil est soumis deux conditions : (1) ce priphrique ne doit pas causer d'interfrence et (2) ce priphrique doit supporter les interfrences, y compris celles susceptibles d'entraner un fonctionnement non souhaitable de l'appareil. La protection des communications ne peut pas tre assure lors de l'utilisation de ce tlphone. Le prsent produit est conforme aux spcications techniques applicables d'Innovation, Sciences et Dveloppement conomique Canada. THIS DEVICE MEETS THE LIMITS AS REFERENCED BY ISED RSS-102 R5 FOR EXPOSURE TO RADIO WAVES Your device includes a radio transmitter and receiver. It is designed not to exceed the General populace
(uncontrolled) limits for exposure to radio waves (radio frequency electromagnetic elds) as referenced in RSS-102 which references Health Canada Safety Code 6 and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specied from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of the user or operator. The device has been tested and found compliant with the applicable regulations as part of the radio certication process. Dclaration d'Exposition aux RF Canadienne CE PRIPHRIQUE RESPECTE LES LIMITES DCRITES PAR LA NORME RSS-102 R5 D'EXPOSITION DES ONDES RADIO Cisco Video Phone 8875 Documentation 42 Product Safety and Security Canadian High-Power Radars Statement REVIEWDRAFT-CISCOCONFIDENTIAL Votre appareil comprend un metteur et un rcepteur radio. Il est conu pour ne pas dpasser les limites applicables la population gnrale (ne faisant pas l'objet de contrles priodiques) d'exposition des ondes radio (champs lectromagntiques de frquences radio) comme indiqu dans la norme RSS-102 qui sert de rfrence au rglement de scurit n6 sur l'tat de sant du Canada et inclut une marge de scurit importantes conue pour garantir la scurit de toutes les personnes, quels que soient leur ge et tat de sant. En tant que tels, les systmes sont conus pour tre utiliss en vitant le contact avec les antennes par l'utilisateur nal. Il est recommand de positionner le systme un endroit o les antennes peuvent demeurer au moins une distance minimum prconise de l'utilisateur, conformment aux instructions des rglementations qui sont conues pour rduire l'exposition globale de l'utilisateur ou de l'oprateur. Le priphrique a t test et dclar conforme aux rglementations applicables dans le cadre du processus de certication radio. Canadian High-Power Radars Statement Users should also be advised that high-power radars are allocated as primary users (that is, priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Devraient galement tre informs des utilisateurs que les radars haute puissance sont dsigns comme utilisateurs principaux ( savoir des utilisateurs prioritaires) des bandes 5250-5350 MHz et 5650 5.850 MHz et que ces radars pourraient provoquer des interfrences et / ou endommager les priphriques LE-LAN. FCC Compliance Statements FCC Part 15.19 Statement FCC Part 15.21 Statement FCC RF Radiation Exposure Statement The Federal Communications Commission requires compliance statements for the following:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20 cm from the user and must not be collocated or operating in conjunction with any other antenna or transmitter. FCC Receivers and Class B Digital Statement This product has been tested and complies with the specications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Cisco Video Phone 8875 Documentation 43 Cisco Product Security Overview Product Safety and Security REVIEWDRAFT-CISCOCONFIDENTIAL If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receiver's Consult a dealer or an experienced radio/TV technician for assistance Cisco Product Security Overview This product contains cryptographic features and is subject to U.S. and local country laws that govern import, export, transfer, and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute, or use encryption. Importers, exporters, distributors, and users are responsible for compliance with U.S. and local country laws. By using this product, you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. Further information regarding U.S. export regulations can be found at https://www.bis.doc.gov/
policiesandregulations/ear/index.htm. Cisco Circular Economy Cisco has adopted circular design principles in its products by pioneering the use of post-consumer recycled plastic. The models listed below now reduce the use of natural resources while closing the loop with its own electronic waste. Visit Cisco's Circular Economy website to learn more about what this means:
Web site URL: https://www.cisco.com/c/en/us/about/circular-economy.html Web site QR code:
Cisco Video Phone 8875 Documentation 44 Product Safety and Security Important Online Information REVIEWDRAFT-CISCOCONFIDENTIAL Important Online Information End User License Agreement The End User License Agreement (EULA) is located here: https://www.cisco.com/go/eula Regulatory Compliance and Safety Information Regulatory Compliance and Safety Information (RCSI) is located here:
Draft comment: The URL for RCSI documentation will be added here when available. Cisco Video Phone 8875 Documentation 45 Important Online Information Product Safety and Security REVIEWDRAFT-CISCOCONFIDENTIAL Cisco Video Phone 8875 Documentation 46
1 2 3 | Internal Photos | Internal Photos | 4.25 MiB | February 16 2022 / August 16 2022 | delayed release |
1 2 3 | External Photos | External Photos | 3.19 MiB | February 16 2022 / August 16 2022 | delayed release |
1 2 3 | ID Label/Location Info | ID Label/Location Info | 176.57 KiB | February 16 2022 / February 18 2022 |
stftetfes cisco stftetfne cisco OMe ome ua de 3) may not cause harmful interference, and (
must accept any inte ved, including interference that may cause undesi Power input (Mi /Alimentation Entre) 48V= 1.042 Pea ees eal ued Tepe seetcced oe) en ma Product Name (j* 444K /Nom Du Produit ): Video Phone (Video iz) Model ( #5 /Modle): CP-8875 Manufacturer (Fil #8)/Fabricant ): Cisco Systems,Inc This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Power input (#@/Alimentation Entre) 48V==1.042A, 5.2/5,3 GHZ is limited to indoor use only in Japan US: XXXXXXXXX Cisco Systems, Inc. CAN ICES-003(8)/NMB-003(8) 170 West Tasman Drive San Jose, CA 95134, USA 2.4 DS/OF 4 TELEPERMIT Eieee Syme NZ Lo iFehuetooth IP Phere PTC XXX/ XX / XXX NYCEICTIOQOUXXITS Ce Dacia iced souess Bae see Mee L nd
[peed Det igea Ieee ead PTA 7 a Fabriqu en Chini S B e ps NYCEICTIXXXXIXXITS [Hac] MSIP-CMM- E134 @e IFTEL: RCPCICPXXDXXXX TNY-CPXXXX E503 RANZ _LRE2435_ hito:lcisco-eturns.com Foc io: _pKes752517 [ R IC: 2461N-88752517 3 COX. ANATEL Made in China / PER Fabriqu en Chine
1 2 3 | Declaration of authorization | Cover Letter(s) | 239.87 KiB | February 16 2022 / February 18 2022 |
stfivttne cisco Declaration of Authorization We Name: Cisco Systems Inc Address: 125 West Tasman Drive City: San Jose State: CA 95134-1706 Country: United States. Declare that:
Name Representative of agent: | Ms. Melody Wu. Agent Company name: BTL Inc. Address: No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist.114, City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s):
Product description: Video Phone Type designation: CP-8875 Trademark: CISCO Validity/ expiry date: From January 5, 2022 to January 5, 2023. on our behalf. Date: January 28, 2022 City: San Jose Name: Samuel Kim ........ ?) Function: Manager, Engineering LZ. Signature:
Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
1 2 3 | Test Setup Photos | Test Setup Photos | 1.19 MiB | February 16 2022 / August 16 2022 | delayed release |
1 2 3 | confidentiality | Cover Letter(s) | 91.16 KiB | February 16 2022 / February 18 2022 |
Page 1 of 1 FCC, Request for non-disclosure RF_501, Issue 8 To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: LDK88752517 Reference number: ######
Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):
Internal Photos Users Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Name and signature of applicant: Samuel Kim Date: 14 February 2022 Company Name: Cisco Systems Inc Address:125 West Tasman Drive City:San Jose State:CA 95134-1706 Country:United States Notes:
1) A document or type of document can only have ONE type of confidentiality!
2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!
The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period
1 2 3 | DTS UNII Device Declaration Letter | Cover Letter(s) | 46.90 KiB | February 16 2022 / February 18 2022 |
stlierfns cisco To whom tt may concern We have declared below featured for FCC equipment authorization, Device FCC ID LDK88752517 f
(1) DFS Device -- [_]Master, []Clent with Radar detection capability, XXIchent without radar detection capability, [_]N/A
(2) Active / Passive Scanning , Ad hoc made access point capability DTS-UNII Device Declaration Letter Frequency Band (MHz}
Active Scanning
(the device can transmit a probe (beacon)) passive scanning
(where the device is can listen only with no probes) Ad Hoc Mode or WIFI Direct capability Access point capability 2412-2462 2422-2452 5180-5240 5190-5230 5210 |
5260-5320 5270-5310 5290-
5500-5700 5510-5670 5530-5690 5745-5825 5755-5795 5775
(3) Country code selection ability - [_lYes, [X]No
| |Yes, XINo
[_|Yes, I<]No
[_]Yes, [X]No
[_lyes, Ix|No
[_lYes, XINo
| lYes, XINo
[ |Yes, xINo
| Yes, XXINo
| lYes, Xx<]No
[_lYes, hx]No
[_ Yes, X<INo
[ lyes, D<INo
| lYes, Dx]No
| Yes, <]No Bxlves, [_|No k<lves, [_]No xyes, [_]No xlyes, [_|No xlyes, [_|No
<lves, [_|No hxlyes, |_|No XXlyes, L_|No
[Xlves, [_|No
[xlyes, L_INo BXlves, [_|No Ixlyes, | |No
[Xlyes, [_]No
[<lves, [_|No
| Yes, XINo L_lyes, X|No
[_lYes, X]No
[ Yes, [X]No
| lyves, XINo
| lyes, XINo
[_ Yes, [xINo
| ]Yes, Ex]No
[ Yes, DXINo
| Yes, IXINo
[_lyes, [X]No
[_ Yes, X]No
| Yes, XXINo
[_lYes, EX<INo
[_lyes, XXINo
| lyes, X]No
| lyes, iX]No
[_lyes, XX<INo
[_lyes, EXINo
[_lyes, EX|No
| lYes, BX|No
| yes, XX]No
[_ yes, XXINo
[_ les, XXINo
[_lYes, X<]No
[_lYes, Xx]No
|_lyes, XINo
[_lYes, KXINo if yes, pls explain how tt was implemented (pls also help to provide detail of options for each country selection)
(4) Meet 15.202 requirement - XlYes, _]No, Pls check below
{_]A master device ts defined as a device operating in a mode tn which tt has the capability to transmit without receiving an enabling signal In this mode it 1s able to select a channel and initiate a network by sending enabling signals to other devices BXJA client device is defined as a device operating in a mode In which the transmissions of the device are under contro! of the master. A device tn client mode is not able to initiate a network
(5) For client devices that have software configuration control to operate in different modes (active scanning In some and passive scanning in others) tn different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware ts implemented to ensure that proper operations modes can not be modified by end user or an installer. LJApply, EXINo Apply (If apply, pls help to provide explanation on It was implement, and how software was controlled)
(6) Please help to provide justification how device was restricted to operate in 5600-5650MHz in below The device operation ts discontinued in the absence of information that complies the requirement Company Name Samuel Kim Name &title Manager, Engineering Address 125 West Tasman Drive, San Jose, CA 95134-1706, United States Telephone 408-527-1446
(Signature)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-02-18 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2022-02-18
|
||||
1 2 3 | Applicant's complete, legal business name |
Cisco Systems Inc
|
||||
1 2 3 | FCC Registration Number (FRN) |
0004968939
|
||||
1 2 3 | Physical Address |
125 West Tasman Drive
|
||||
1 2 3 |
San Jose, CA
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
LDK
|
||||
1 2 3 | Equipment Product Code |
88752517
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
S******** K********
|
||||
1 2 3 | Title |
Manager, Engineering
|
||||
1 2 3 | Telephone Number |
408-5********
|
||||
1 2 3 | Fax Number |
408-5********
|
||||
1 2 3 |
s******@cisco.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
BTL Inc.
|
||||
1 2 3 | Name |
S****** H********
|
||||
1 2 3 | Physical Address |
No.18, Ln. 171, Sec. 2, Jiuzong Rd.
|
||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
+8862********
|
||||
1 2 3 | Fax Number |
886-2********
|
||||
1 2 3 |
S******@newbtl.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
BTL Inc.
|
||||
1 2 3 | Name |
M**** W******
|
||||
1 2 3 | Physical Address |
No.18, Ln. 171, Sec. 2, Jiuzong Rd.
|
||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
+8862********
|
||||
1 2 3 | Fax Number |
886-2********
|
||||
1 2 3 |
M******@newbtl.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/16/2022 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video Phone | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz and 5775 MHz. | |||||
1 2 3 | Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
BTL Inc.
|
||||
1 2 3 | Name |
A******** Y********
|
||||
1 2 3 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
a******@btl.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0026000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC | 5180 | 5240 | 0.02 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | CC ND | 5260 | 5320 | 0.023 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | CC ND | 5500 | 5700 | 0.018 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | CC | 5745 | 5825 | 0.017 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402 | 2480 | 0.0026 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC | 2412 | 2462 | 0.29 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC