| all | frequencies |
|
|
|
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|---|---|---|
| manuals | ||||||||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 3 4 5 6 7 8 |
|
Corrected Manual Page showing MPE Separation Distance | Users Manual | 11.59 KiB | January 03 2001 / June 03 2001 | |||
| 1 2 3 4 5 6 7 8 |
|
Guide Corrections | Users Manual | 64.19 KiB | December 06 2001 | |||
| 1 2 3 4 5 6 7 8 |
|
Manual | Users Manual | 1.85 MiB | January 09 2001 | |||
| 1 2 3 4 5 6 7 8 |
|
Quick Ref Guide | Users Manual | 76.99 KiB | December 06 2001 | |||
| 1 2 3 4 5 6 7 8 |
|
Quick Ref Guide Additions | Users Manual | 8.34 KiB | December 06 2001 | |||
| 1 2 3 4 5 6 7 8 |
|
Revised Manual | Users Manual | 1.31 MiB | October 08 2001 | |||
| 1 2 3 4 5 6 7 8 |
|
Teampad 500 System Users Guide | Users Manual | 316.56 KiB | December 06 2001 | |||
| 1 2 3 4 5 6 7 8 | External Photos | |||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | |||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | |||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | December 10 2001 | ||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | December 10 2001 | ||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | December 10 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | |||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | January 09 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | January 09 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | January 09 2001 | ||||||
| 1 2 3 4 5 6 7 8 | External Photos | January 09 2001 | ||||||
| 1 2 3 4 5 6 7 8 | ID Label/Location Info | January 09 2001 | ||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | January 09 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | January 09 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | January 09 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | October 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Internal Photos | October 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | October 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | October 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | / August 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | External Photos | / August 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | / August 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | February 08 2001 / August 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | February 08 2001 / August 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | February 08 2001 / August 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | / August 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | / August 08 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | December 06 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | December 06 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | / December 06 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | December 06 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | December 06 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | December 06 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Operational Description | / September 04 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Operational Description | / September 04 2001 | ||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | / September 04 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Attestation Statements | / September 04 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | / June 03 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | / June 03 2001 | ||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | / June 03 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | June 03 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | / June 03 2001 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 06 2000 | ||||||
| 1 2 3 4 5 6 7 8 | Parts List/Tune Up Info | May 06 2000 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | External Photos | |||||||
| 1 2 3 4 5 6 7 8 | External Photos | |||||||
| 1 2 3 4 5 6 7 8 | Internal Photos | native | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Parts List/Tune Up Info | June 06 2000 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | May 06 2000 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 06 2000 | ||||||
| 1 2 3 4 5 6 7 8 |
|
Revised Manual Page | RF Exposure Info | 11.19 KiB | ||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | May 06 2000 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) |
| 1 2 3 4 5 6 7 8 | Corrected Manual Page showing MPE Separation Distance | Users Manual | 11.59 KiB | January 03 2001 / June 03 2001 |
Safety Information for the Cisco Aironet 350 Series PC Card Client Adapter The Federal Communications Commission (FCC) with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. Cisco Aironet 350 Series products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio according to the instructions found in this manual and the hardware and software guides on the Cisco Aironet 350 Series Client Adapters CDs will result in user exposure that is substantially below the FCC recommended limits. Do not touch or move the antenna(s) while the unit is transmitting or receiving.
Do not hold any component containing a radio such that the antenna is very close to or touching any exposed parts of the body, especially the face or eyes, while transmitting.
Do not operate a portable transmitter near unshielded blasting caps or in an explosive environment unless it is a type especially qualified for such use.
Do not operate the radio or attempt to transmit data unless the antenna is connected;
otherwise, the radio may be damaged.
Antenna use:
In order to comply with FCC RF exposure limits, dipole antennas should be located at a minimum distance of 7.9 inches (20 cm) or more from the body of all persons. High-gain, wall-mount, or mast-mount antennas are designed to be professionally installed and should be located at a minimum distance of 12 inches (30 cm) or more from the body of all persons. Please contact your professional installer, VAR, or antenna manufacturer for proper installation requirements. Warning for laptop users: In order to comply with RF exposure limits, it is recommended when using a laptop with a PC card client adapter that the adapters integrated antenna not be positioned closer than 2 inches (5 cm) from your body or nearby persons for extended periods of time while it is transmitting (or operating). If the antenna is positioned less than 2 inches (5 cm) from the user, it is recommended that the user limit exposure time. 7
| 1 2 3 4 5 6 7 8 | Guide Corrections | Users Manual | 64.19 KiB | December 06 2001 |
Regulatory Document Quick Reference Guide Regulatory Additions TeamPad 500 ISSUE: 1.0 Page 1 of 1 The following additional items will be added to the TeamPad 500 Quick Reference guide at time of release. 1. FCC RF Exposure Guidelines:
WARNING: FCC Exposure Guidelines To satisfy FCC RF exposure compliance requirements for a mobile transmitting device, this device should be used in hand-held, hand-operated configurations only. The device and its antenna should generally maintain a separation distance of 20 cm or more from a persons body. This device is designed to be used in a persons hands and its operating configurations, generally do not support normal transmissions while it is carried in pockets or holsters next to a persons body. 2. RF Devices Caution Statement / Present Certification Information This device has been properly certified to be used with the the following RF card(s):
1. Cisco {Part:AIR-LMC352}, {FCC ID: LDK102040}, {Canada: 246 1103 2079A}. Any changes or modifications to Fujitsus equipment not expressly approved by Fujitsu could void the users authority to operate the equipment per FCC regulations. Installation / Servicing Procedures Only authorized Fujitsu integrators are permitted to install and service the RF devices within this unit. 3. 4. Operating Distance This device shall be used at a distance of more than 10 away from the body to allow for the best viewing angle for reading the display and also operating the device.
| 1 2 3 4 5 6 7 8 | Manual | Users Manual | 1.85 MiB | January 09 2001 |
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 340 and 350 Series Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel:
408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Customer Order Number:
Text Part Number: OL-0795-01 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense. The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Ciscos installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. Modifying the equipment without Ciscos written authorization may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense. You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures:
Turn the television or radio antenna until the interference stops.
Move the equipment to one side or the other of the television or radio.
Move the equipment farther away from the television or radio.
Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equ ipment and the television or radio are on circuits controlled by different circuit breakers or fuses.) Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCBs public domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Access Registrar, AccessPath, Are You Ready, ATM Director, Browse with Me, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, CCSI, CD-PAC, CiscoLink, the Cisco NetWorks logo, Cisco Powered Network logo, Cisco Systems Networking Academy, Fast Step, FireRunner, Follow Me Browsing, FormShare, GigaStack, IGX, Intelligence in the Optical Core, Internet Quotient, IP/VC, iQ Breakthrough, iQ Expertise, iQ FastTrack, iQ Logo, iQ Readiness Scorecard, Kernel Proxy, MGX, Natural Network Viewer, Network Registrar, the Networkers logo, Packet, PIX, Point and Click Internetworking, Policy Builder, RateMUX, ReyMaster, ReyView, ScriptShare, Secure Script, Shop with Me, SlideCast, SMARTnet, SVX, TrafficDirector, TransPath, VlanDirector, Voice LAN, Wavelength Router, WebViewer, Workgroup Director, and Workgroup Stack are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Empowering the Internet Generation, are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, Cisco, the Cisco Certified Internetwork Expert Logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Collision Free, Enterprise/Solver, EtherChannel, EtherSwitch, FastHub, FastLink, FastPAD, IOS, IP/TV, IPX, LightStream, LightSwitch, MICA, NetRanger, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, SwitchProbe, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. or its affiliates in the U.S. and certain other countries. All other brands, names, or trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0010R) Cisco Aironet Wireless LAN Adapters Hardware Installation Guide Copyright 2001, Cisco Systems, Inc. All rights reserved. C O N T E N T S Preface xi Audience xii Purpose xii Organization xii Conventions xiii Related Publications xvi Obtaining Documentation xvi World Wide Web xvi Documentation CD-ROM xvi Ordering Documentation xvii Obtaining Technical Assistance xvii Cisco Connection Online xvii Technical Assistance Center xviii Documentation Feedback xix C H A P T E R 1 Product Overview 1-1 Introduction to the Client Adapters 1-2 Terminology 1-3 Parts of the Client Adapter 1-3 Radio 1-3 Radio Antenna 1-4 LEDs 1-5 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide v Contents Security Features of the Client Adapter 1-5 WEP Keys 1-5 EAP and LEAP 1-6 Network Configurations Using the Client Adapter 1-7 Ad Hoc Wireless LAN 1-8 Wireless Infrastructure with Workstations Accessing a Wired LAN 1-9 Positioning Your Wireless Products 1-10 Site Survey 1-10 Link Test 1-11 C H A P T E R 2 Preparing for Installation 2-1 Safety information 2-2 FCC Safety Compliance Statement 2-2 Safety Guidelines 2-2 Warnings 2-3 Unpacking the Client Adapter 2-4 Package Contents 2-4 System Requirements 2-5 Site Requirements 2-6 C H A P T E R 3 Installing the Client Adapter 3-1 Inserting the Client Adapter into a Computing Device 3-2 Inserting a PC Card 3-2 Inserting a PCI Client Adapter 3-4 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide vi OL-0795-01 Contents Installing the Correct Driver 3-6 Installing the Driver for Windows 95 3-7 Windows 95 Version A 3-7 Windows 95 Version B 3-9 Installing the Driver for Windows 98 3-11 Installing the Driver for Windows NT 3-13 Installing the Driver for Windows 2000 3-14 Installing the Driver for Windows Millennium Edition (Me) 3-16 Installing the Driver for Windows CE 3-18 Determining Windows CE Version and Processor Type 3-18 Windows CE 2.11 3-19 Windows CE 3.00 3-21 Installing the Driver for Linux 3-24 Installing the Driver for MacOS 9.x 3-27 Installing the Client Utilities and Enabling LEAP or EAP 3-30 Verifying Installation 3-33 C H A P T E R 4 Troubleshooting and Routine Procedures 4-1 Accessing the Latest Troubleshooting Information 4-2 Using the Indicator LEDs 4-2 Problems after Installing the Driver 4-3 Client Adapter Recognition Problems 4-3 Missing Files in Windows CE 4-4 Resolving Resource Conflicts 4-4 Resolving Resource Conflicts in Windows 95, 98, and Me 4-5 Resolving Resource Conflicts in Windows 2000 4-6 Resolving Resource Conflicts in Windows NT 4-7 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide vii Contents Problems Obtaining an IP Address in Windows CE 4-7 Problems Associating to the Access Point 4-8 Problems Authenticating to the Access Point 4-8 Problems Connecting to the Network 4-8 Removing the Driver 4-9 Removing the 6.10 Driver 4-10 Removing the 6.10 Driver for Windows 95 and 98 4-10 Removing the 6.10 Driver for Windows NT 4-11 Removing the 6.10 Driver for Windows 2000 4-12 Removing a Driver Other Than the 6.10 Driver 4-13 Removing the Driver for Windows 95, 98, and Me 4-13 Removing the Driver for Windows NT 4-14 Removing the Driver for Windows 2000 4-15 Removing the Driver for Windows CE 2.11 4-16 Removing the Driver for Windows CE 3.00 4-16 Removing the Driver for Linux 4-17 Removing the Driver for MacOS 9.x 4-17 Updating the Driver 4-18 Upgrading the Driver for Windows 95 and 98 4-19 Upgrading the Driver for Windows NT 4-19 Upgrading the Driver for Windows 2000 4-20 Upgrading the Driver for Windows Me 4-21 Upgrading the Driver for Windows CE 4-22
*.dll Files 4-22
*.cab Files 4-22 Upgrading the Driver for Linux 4-23 Upgrading the Driver for MacOS 9.x 4-23 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide viii OL-0795-01 Contents Removing the Client Adapter 4-24 Removing a PC Card 4-24 Removing a PCI Client Adapter 4-24 Uninstalling the Client Utilities and the Aironet Client Utility Setup Program 4-25 A P P E N D I X A Technical Specifications A-1 A P P E N D I X B Translated Safety Warnings B-1 Explosive Device Proximity Warning B-2 Warning for Laptop Users B-3 A P P E N D I X C Declarations of Conformity and Regulatory Information C-1 Manufacturers Federal Communication Commission Declaration of Conformity Statement C-2 Department of Communications Canada C-3 Canadian Compliance Statement C-3 European Community, Switzerland, Norway, Iceland, and Liechtenstein C-4 Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC C-4 Declaration of Conformity for RF Exposure C-6 Guidelines for Operating Cisco Aironet Wireless LAN Adapters in Japan C-7 Japanese Translation C-7 English Translation C-8 G L O S S A R Y I N D E X OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide ix Contents Cisco Aironet Wireless LAN Adapters Hardware Installation Guide x OL-0795-01 Preface The preface provides an overview of the Cisco Aironet Wireless LAN Adapters Hardware Installation Guide, references related publications, and explains how to obtain other documentation and technical assistance, if necessary. The following topics are covered in this section:
Audience, page xii
Purpose, page xii
Organization, page xii
Conventions, page xiii
Related Publications, page xvi
Obtaining Documentation, page xvi
Obtaining Technical Assistance, page xvii OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xi Audience Audience Purpose Preface This publication is for the person responsible for installing and maintaining a Cisco Aironet Wireless LAN Adapter, also referred to as a client adapter. The installer should be familiar with computing devices and with network terms and concepts. This publication describes the client adapters, explains how to install the adapters and the client utilities (which enable you to configure and view the status of the adapter), and offers troubleshooting information. Organization This publication is organized into the following chapters:
Chapter 1, Product Overview, provides an introduction to the client adapters, describes network configurations, and offers guidelines for positioning equipment in a wireless network.
Chapter 2, Preparing for Installation, provides information that you need to know before installing a client adapter, such as safety information and system requirements.
Chapter 3, Installing the Client Adapter, provides instructions for inserting a client adapter as well as installing the driver and the client utilities.
Chapter 4, Troubleshooting and Routine Procedures, provides information for diagnosing and correcting common problems as well as procedures for updating or removing the driver and uninstalling the client utilities.
Appendix A, Technical Specifications, lists the physical, radio, power, and regulatory specifications for the client adapters.
Appendix B, Translated Safety Warnings, provides translations of the client adapters safety warnings in nine languages.
Appendix C, Declarations of Conformity and Regulatory Information, provides conformity and regulatory information for the client adapters. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xii OL-0795-01 Preface Conventions Conventions This publication uses the following conventions to convey instructions and information:
Commands and keywords are in boldface.
Variables are in italics.
Notes, cautions, and warnings use the following conventions and symbols:
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual. Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translations of the warnings that appear in this publication, refer to Appendix B, Translated Safety Warnings. Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard maatregelen om ongelukken te voorkomen. Voor vertalingen van de waarschuwingen die in deze publicatie verschijnen, kunt u het document Regulatory Compliance and Safety Information (Informatie over naleving van veiligheids- en andere voorschriften) raadplegen dat bij dit toestel is ingesloten. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xiii Preface Conventions Varoitus Attention Warnung Avvertenza Tm varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin tyskentelet minkn laitteiston parissa, ota selv shkkytkentihin liittyvist vaaroista ja tavanomaisista onnettomuuksien ehkisykeinoista. Tss julkaisussa esiintyvien varoitusten knnkset lydt laitteen mukana olevasta Regulatory Compliance and Safety Information -kirjasesta (mrysten noudattaminen ja tietoa turvallisuudesta). Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer des blessures ou des dommages corporels. Avant de travailler sur un quipement, soyez conscient des dangers poss par les circuits lectriques et familiarisez-vous avec les procdures couramment utilises pour viter les accidents. Pour prendre connaissance des traductions davertissements figurant dans cette publication, consultez le document Regulatory Compliance and Safety Information
(Conformit aux rglements et consignes de scurit) qui accompagne cet appareil. Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer Krperverletzung fhren knnte. Bevor Sie mit der Arbeit an irgendeinem Gert beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur Vermeidung von Unfllen bewut. bersetzungen der in dieser Verffentlichung enthaltenen Warnhinweise finden Sie im Dokument Regulatory Compliance and Safety Information (Informationen zu behrdlichen Vorschriften und Sicherheit), das zusammen mit diesem Gert geliefert wurde. Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidenti. La traduzione delle avvertenze riportate in questa pubblicazione si trova nel documento Regulatory Compliance and Safety Information (Conformit alle norme e informazioni sulla sicurezza) che accompagna questo dispositivo. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xiv OL-0795-01 Preface Advarsel Conventions Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan fre til personskade. Fr du utfrer arbeid p utstyr, m du vare oppmerksom p de faremomentene som elektriske kretser innebrer, samt gjre deg kjent med vanlig praksis nr det gjelder unng ulykker. Hvis du vil se oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i dokumentet Regulatory Compliance and Safety Information
(Overholdelse av forskrifter og sikkerhetsinformasjon) som ble levert med denne enheten. Aviso Este smbolo de aviso indica perigo. Encontra-se numa situao que lhe poder causar danos fsicos. Antes de comear a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos elctricos, e com quaisquer prticas comuns que possam prevenir possveis acidentes. Para ver as tradues dos avisos que constam desta publicao, consulte o documento Regulatory Compliance and Safety Information (Informao de Segurana e Disposies Reguladoras) que acompanha este dispositivo. Advertencia!
Varning!
Este smbolo de aviso significa peligro. Existe riesgo para su integridad fsica. Antes de manipular cualquier equipo, considerar los riesgos que entraa la corriente elctrica y familiarizarse con los procedimientos estndar de prevencin de accidentes. Para ver una traduccin de las advertencias que aparecen en esta publicacin, consultar el documento titulado Regulatory Compliance and Safety Information (Informacin sobre seguridad y conformidad con las disposiciones reglamentarias) que se acompaa con este dispositivo. Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utfr arbete p ngon utrustning mste du vara medveten om farorna med elkretsar och knna till vanligt frfarande fr att frebygga skador. Se frklaringar av de varningar som frkommer i denna publikation i dokumentet Regulatory Compliance and Safety Information (Efterrttelse av freskrifter och skerhetsinformation), vilket medfljer denna anordning. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xv Related Publications Related Publications Preface For more information about Cisco Aironet Wireless LAN Adapters and related products, refer to the following publications:
Quick Start Guide: Cisco Aironet Wireless LAN Adapters
Cisco Aironet Wireless LAN Adapters Software Configuration Guide
Release Notes for Cisco Aironet Wireless LAN Adapters
Quick Start Guide: Cisco Aironet Access Points
Cisco Aironet Access Point Hardware Installation Guide
Cisco Aironet Access Point Software Configuration Guide Obtaining Documentation World Wide Web You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com. Documentation CD-ROM Other Cisco documentation and additional literature are available in a CD-ROM package shipped separately from the Cisco Aironet Series Wireless LAN Adapters CD that shipped with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. To order copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xvi OL-0795-01 Preface Obtaining Technical Assistance Ordering Documentation Registered users of Ciscos web site, Cisco Connection Online (CCO), can order Cisco product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi. Nonregistered CCO users can order documentation through a local account representative by calling Ciscos corporate headquarters (California, USA) at 408 526-4000 or 800 553-NETS (6387) in North America. Obtaining Technical Assistance Cisco provides CCO as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, or a self-addressed stamped response card included in many printed docs or by sending mail to Cisco. Cisco Connection Online Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online (CCO) is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco. CCOs broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available. Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order, and view benefits specific to their relationships with Cisco. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xvii Obtaining Technical Assistance Preface You can access CCO in the following ways:
WWW: www.cisco.com
Telnet: cco.cisco.com
Modem using standard connection rates and the following terminal settings:
VT100 emulation; 8 data bits; no parity; and 1 stop bit From North America, call 408 526-8070 From Europe, call 33 1 64 46 40 82 You can e-mail questions about using CCO to cco-team@cisco.com. Technical Assistance Center The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract. To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport. To contact by e-mail, use one of the following:
Language English Hanzi (Chinese) Kanji (Japanese) Hangul (Korean) Spanish Thai E-mail Address tac@cisco.com chinese-tac@cisco.com japan-tac@cisco.com korea-tac@cisco.com tac@cisco.com thai-tac@cisco.com In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/
DirTAC.shtml. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xviii OL-0795-01 Preface Obtaining Technical Assistance Documentation Feedback If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. You can e-mail your comments to bug-doc@cisco.com. To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:
Cisco Systems, Inc. Document Resource Connection 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate and value your comments. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xix Obtaining Technical Assistance Preface Cisco Aironet Wireless LAN Adapters Hardware Installation Guide xx OL-0795-01 C H A P T E R 1 Product Overview This chapter describes the Cisco Aironet Wireless LAN Adapters, also referred to as client adapters, and illustrates their role in a wireless network. The following topics are covered in this section:
Introduction to the Client Adapters, page 1-2
Parts of the Client Adapter, page 1-3
Security Features of the Client Adapter, page 1-5
Network Configurations Using the Client Adapter, page 1-7
Positioning Your Wireless Products, page 1-10 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-1 Introduction to the Client Adapters Chapter 1 Product Overview Introduction to the Client Adapters The Cisco Aironet Wireless LAN Adapters, also referred to as client adapters, are radio modules that provide transparent wireless data communications between fixed, portable, or mobile devices and other wireless devices or a wired network infrastructure. The client adapters are fully compatible when used in devices supporting Plug-and-Play (PnP) technology. The primary function of the client adapters is to transfer data packets transparently through the wireless infrastructure. The adapters operate similarly to a standard network product except that the cable is replaced with a radio connection. No special wireless networking functions are required, and all existing applications that operate over a network will operate using the adapters. This document covers three types of client adapters:
PC card client adapter (also referred to as a PC card) A PCMCIA card radio module that can be inserted into any device equipped with an external Type II or Type III PC card slot. Host devices can include laptops, notebook computers, personal digital assistants, and hand-held or portable devices.
LM card client adapter (also referred to as an LM card) A PCMCIA card radio module that can be inserted into any device equipped with an internal Type II or Type III PC card slot. Host devices usually include hand-held or portable devices.
PCI client adapter A client adapter card radio module that can be inserted into any device equipped with an empty PCI expansion slot, such as a desktop computer. CISCO AIRONET 340 SERIES 11 Mbps WIRELESS LAN ADAPTER CISCO AIRONET 340 SERIES 11 Mbps WIRELESS LAN ADAPTER Refer to the Radio Antenna section on page 1-4 for antenna differences between these adapters. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-2 OL-0795-01 Chapter 1 Product Overview Terminology Parts of the Client Adapter Throughout this document, the following terms are used:
client adapter Refers to all three types of adapters
PC card, LM card, or PCI client adapter Refers to only a specific adapter
workstation (or station) Refers to a computing device with an installed client adapter Parts of the Client Adapter The client adapter is composed of three major parts: a radio, a radio antenna, and two LEDs. Radio The client adapter contains a direct-sequence spread spectrum (DSSS) radio that operates in the 2.4-GHz license-free Industrial Scientific Medical (ISM) band. The radio transmits data over a half-duplex radio channel operating at up to 11 Mbps. DSSS technology causes radio signals to be transmitted over a wide frequency range, using multiple frequencies simultaneously. The benefit of this technology is its ability to protect the data transmission from interference. For example, if a particular frequency encounters noise or interference or both, enough redundancy is built into the signal on other frequencies that the client adapter usually will still be successful in its transmission. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-3 Parts of the Client Adapter Radio Antenna Chapter 1 Product Overview The type of antenna used depends on your client adapter:
PC cards have an integrated, permanently attached diversity antenna. The benefit of the diversity antenna system is improved coverage. The system works by allowing the card to switch and sample between its two antenna ports in order to select the optimum port for receiving data packets. As a result, the card has a better chance of maintaining the radio frequency (RF) connection in areas of interference. The antenna is housed within the section of the card that hangs out of the PC card slot when the card is installed.
LM cards are shipped without an antenna; however, an antenna can be connected through the cards external connector. If a snap-on antenna is used, it should be operated in diversity mode. Otherwise, the antenna mode used should correspond to the antenna port to which the antenna is connected.
PCI client adapters are shipped with a 2-dBi dipole antenna that attaches to the adapters antenna connector. However, other types of antennas may be used. PCI client adapters can be operated through the right antenna port only. Note Note Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for information on setting the client adapters antenna mode. External antennas used in combination with a power setting resulting in a radiated power level above 100 mW equivalent isotropic radiated power (EIRP) are not allowed for use within the European community and other countries that have adopted the European R&TTE directive or the CEPT recommendation Rec 70.03 or both. For more details on legal combinations of power levels and antennas in those countries, contact Cisco Corporate Compliance. See also the Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC section on page C-4. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-4 OL-0795-01 Chapter 1 Product Overview Security Features of the Client Adapter LEDs The client adapter has two LEDs that glow or blink to indicate the status of the adapter or to convey error messages. Refer to Chapter 4 for an interpretation of the LED codes. Security Features of the Client Adapter The client adapter supports two principal security features to protect your data as it is transmitted through your wireless network: Wired Equivalent Privacy (WEP) keys and Extensible Authentication Protocol (EAP) or LEAP (also referred to as EAP - Cisco Wireless). WEP Keys WEP is an optional IEEE 802.11 feature that provides your client adapter and other devices on your wireless network with data confidentiality equivalent to that of a wired LAN. It involves packet-by-packet data encryption by the transmitting device and decryption by the receiving device. Each device within your wireless network is assigned up to four encryption keys, called WEP keys, that encrypt data before it is transmitted. If a device receives a packet that is not encrypted with the appropriate key (as the WEP keys of all devices must match), the device discards the packet and never delivers it to the intended receiver. For the client adapter, WEP is implemented through the client utilities. In Windows and Linux operating systems, the Client Encryption Manager (CEM) utility allows you to set WEP keys, and the Aironet Client Utility (ACU) is used to enable WEP. In the MacOS 9.x operating system, WEP keys are set and enabled in one utility. Note Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions on setting WEP keys and enabling WEP for your specific operating system. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-5 Security Features of the Client Adapter EAP and LEAP Chapter 1 Product Overview EAP is an optional IEEE 802.1x security feature that is ideal for organizations with a large user base and access to an EAP-enabled Remote Authentication Dial-In User Service (RADIUS) server, such as Cisco Secure ACS 2.6. The RADIUS server uses EAP to provide server-based authentication for clients. Server-based authentication can be enabled for your client adapter in one of two ways:
Through a host device and code built into its operating system (referred to as EAP)
Through your client adapters firmware and Cisco software (referred to as LEAP) This method provides authentication service to client adapters whose host devices are not running an operating system with built-in EAP support. The term LEAP is used to distinguish authentication provided by the client firmware from authentication provided by a host and its operating system. For Windows 95, 98, NT, 2000, or Me or future Windows operating systems, the Aironet Client Utility setup program, which installs the client utilities, is used to enable LEAP or EAP. After LEAP or EAP is enabled and the computer is rebooted, the client adapter authenticates to the RADIUS server using the username and password entered by the user at the network logon. See the Installing the Client Utilities and Enabling LEAP or EAP section on page 3-30 for instructions on using the Aironet Client Utility setup program to enable LEAP or EAP. For Windows CE, Linux, and MacOS 9.x, LEAP is enabled through a particular screen in the client utilities. The username and password entered in this screen are used by the client adapter to authenticate to the RADIUS server. In Windows CE, you do not need to re-enter your username and password after your device is rebooted or your client adapter is ejected. In Linux and MacOS 9.x, the username and password need to be re-entered at the start of each new session. See the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions on enabling LEAP through the client utilities. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-6 OL-0795-01 Chapter 1 Product Overview Network Configurations Using the Client Adapter When you enable EAP on your Access Points and LEAP or EAP on your client adapter, authentication to the network occurs in the following sequence:
1. The client adapter uses the username and password to start the authentication process. 2. The Access Point communicates with the EAP-compliant RADIUS server to authenticate the username and password. 3. If the username and password are valid, the RADIUS server and the client adapter negotiate a dynamic, session-based WEP key. The key, which is unique for the authenticated client, provides the client with secure network access. 4. The client and Access Point use the WEP key for all data transmissions during the session. Note Refer to the IEEE 802.11 Standard for more information on EAP and to the following URL for additional information on RADIUS servers: http://www.cisco.com/univercd/cc/td/doc/product/
software/ios120/12cgcr/secur_c/scprt2/scrad.htm. Network Configurations Using the Client Adapter The client adapter can be used in a variety of network configurations. In some configurations, Access Points provide connections to your network or act as repeaters to increase wireless communication range. The maximum communication range is based on how you configure your wireless network. This section describes and illustrates the following common network configurations:
Ad hoc wireless local area network (LAN)
Wireless infrastructure with workstations accessing a wired LAN Note For examples of more complex network configurations involving client adapters and Access Points, refer to the Cisco Aironet Access Point Hardware Installation Guide. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-7 Network Configurations Using the Client Adapter Chapter 1 Product Overview Note Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for information on setting the client adapters network mode. Ad Hoc Wireless LAN An ad hoc (or peer-to-peer) wireless LAN (see Figure 1-1) is the simplest wireless LAN configuration. In a wireless LAN using an ad hoc network configuration, all devices equipped with a client adapter can be linked together and communicate directly with each other. Figure 1-1 Ad Hoc Wireless LAN 0 2 5 7 4 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-8 OL-0795-01 Chapter 1 Product Overview Network Configurations Using the Client Adapter Wireless Infrastructure with Workstations Accessing a Wired LAN A microcellular network can be created by placing two or more Access Points on a LAN. Figure 1-2 shows a microcellular network with workstations accessing a wired LAN through several Access Points. This configuration is useful with portable or mobile stations because it allows them to be directly connected to the wired network even while moving from one microcell domain to another. This process is transparent, and the connection to the file server or host is maintained without disruption. The mobile station stays connected to an Access Point as long as it can. However, once the transfer of data packets needs to be retried or beacons are missed, the station automatically searches for and associates to another Access Point. This process is referred to as seamless roaming. Figure 1-2 Wireless Infrastructure with Workstations Accessing a Wired LAN Access Point
(Root Unit) Wired LAN Access Point
(Root Unit) OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 5 3 8 5 4 1-9 Positioning Your Wireless Products Chapter 1 Product Overview Positioning Your Wireless Products Determining the network location of your wireless products can be influenced by a number of factors. This section discusses those factors and provides guidelines and tools for achieving optimum placement. The site survey and link test tools provided with the client utilities can help you to determine the best placement for Access Points and workstations within your wireless network. Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for information on using these tools and to the Cisco Aironet Access Point Hardware Installation Guide for additional information on the placement of Access Points. Note The site survey and link test tools are not supported in the Linux operating system. Site Survey Because of differences in component configuration, placement, and physical environment, every network application is a unique installation. Before installing the system, you should perform a site survey to determine the optimum utilization of networking components and to maximize range, coverage, and network performance. Consider the following operating and environmental conditions when performing a site survey:
Data rates Sensitivity and range are inversely proportional to data bit rates. The maximum radio range is achieved at the lowest workable data rate. A decrease in receiver threshold sensitivity occurs as the radio data increases.
Antenna type and placement Proper antenna configuration is a critical factor in maximizing radio range. As a general rule, range increases in proportion to antenna height.
Physical environment Clear or open areas provide better radio range than closed or filled areas. Also, the less cluttered the work environment, the greater the range. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-10 OL-0795-01 Chapter 1 Product Overview Positioning Your Wireless Products
Obstructions A physical obstruction such as metal shelving or a steel pillar can hinder performance of the client adapter. Avoid locating the workstation in a location where there is a metal barrier between the sending and receiving antennas.
Building materials Radio penetration is greatly influenced by the building material used in construction. For example, drywall construction allows greater range than concrete blocks. Metal or steel construction is a barrier to radio signals. Link Test The link test tool is used to determine RF coverage. The test results can help the installer to eliminate areas of low RF signal levels that can result in a loss of connection between the client adapter and the Access Point. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-11 Positioning Your Wireless Products Chapter 1 Product Overview Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1-12 OL-0795-01 C H A P T E R 2 Preparing for Installation This chapter provides information that you need to know before installing a client adapter. The following topics are covered in this section:
Safety information, page 2-2
Unpacking the Client Adapter, page 2-4
System Requirements, page 2-5
Site Requirements, page 2-6 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 2-1 Safety information Safety information Chapter 2 Preparing for Installation Follow the guidelines in this section to ensure proper operation and safe use of the client adapter. FCC Safety Compliance Statement The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF electromagnetic energy emitted by FCC-certified equipment. Cisco Aironet products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device according to the instructions in this publication will result in user exposure substantially below the FCC recommended limits. Safety Guidelines
Do not touch or move the antenna while the unit is transmitting or receiving.
Do not hold any component containing a radio such that the antenna is very close to or touching any exposed parts of the body, especially the face or eyes, while transmitting.
Do not operate the radio or attempt to transmit data unless the antenna is connected; otherwise, the radio may be damaged.
Use in specific environments:
The use of wireless devices in hazardous locations is limited to the constraints posed by the safety directors of such environments. The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 2-2 OL-0795-01 Chapter 2 Preparing for Installation Safety information
Antenna use:
In order to comply with FCC RF exposure limits, dipole antennas should be located at a minimum distance of 7.9 inches (20 cm) or more from the body of all persons. High-gain, wall-mount, or mast-mount antennas are designed to be professionally installed and should be located at a minimum distance of 12 inches (30 cm) or more from the body of all persons. Please contact your professional installer, VAR, or antenna manufacturer for proper installation requirements. Warnings Observe the following warnings when operating the client adapter:
Warning Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use. Warning In order to comply with RF exposure limits established in the ANSI C95.1 standards, it is recommended when using a laptop with a PC card client adapter that the adapters integrated antenna is positioned more than 2 inches (5 cm) from your body or nearby persons during extended periods of transmitting or operating time. If the antenna is positioned less than 2 inches (5 cm) from the user, it is recommended that the user limit exposure time. Translated versions of these safety warnings are provided in Appendix B. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 2-3 Unpacking the Client Adapter Chapter 2 Preparing for Installation Unpacking the Client Adapter Follow these steps to unpack the client adapter:
Step 1 Step 2 Step 3 Note Open the shipping container and carefully remove the contents. Return all packing materials to the shipping container and save it. Ensure that all items listed in the Package Contents section below are included in the shipment. Check each item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative. Any remote antenna and its associated wiring are shipped separately. Package Contents Each client adapter is shipped with the following items:
Cisco Aironet PC Card Client Adapter, Cisco Aironet LM Card Client Adapter, or Cisco Aironet PCI Client Adapter
Standard 2-dBi dipole antenna (for PCI client adapter)
Quick Start Guide: Cisco Aironet Wireless LAN Adapters
Cisco Aironet Series Wireless LAN Adapters CD
Cisco Information Packet, which contains warranty, safety, and support information
Cisco product registration card Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 2-4 OL-0795-01 Chapter 2 Preparing for Installation System Requirements System Requirements In addition to the items shipped with the client adapter, you will also need the following in order to install the adapter:
A computing device (laptop, notebook, portable or hand-held device) equipped with a Type II or Type III PC card slot or a desktop personal computer equipped with an empty PCI expansion slot Note All drivers and supporting software (Card and Socket Services) for the PC card slot must be loaded and configured. However, if you are using the Linux operating system, a current version of Card and Socket Services is provided on the Cisco Aironet Series Wireless LAN Adapters CD and can be installed and configured during the driver installation process. See the Installing the Driver for Linux section on page 3-24.
A Phillips screwdriver (for PCI client adapter)
Windows NT Service Pack 3 or greater if your computer uses the Windows NT operating system
The following information from your system administrator:
Your wireless client name The protocols necessary to bind to the client adapter The case-sensitive service set identifier (SSID) for your RF network For Windows CE systems, the primary and secondary Domain Name System (DNS) and Windows Internet Name Service (WINS) for your computer If you are not connected to a DHCP server, the IP address, broadcast address (if you are using the Linux operating system), subnet mask, and default gateway address of your computer The username and password for your network account OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 2-5 Site Requirements Site Requirements Chapter 2 Preparing for Installation Because the client adapter is a radio device, it is susceptible to RF obstructions and common sources of interference that can reduce throughput and range. Follow these guidelines to ensure the best possible performance:
Install the client adapter in an area where large steel structures such as shelving units, bookcases, and filing cabinets will not obstruct radio signals to and from the client adapter. Install the client adapter away from microwave ovens. Microwave ovens operate on the same frequency as the client adapter and can cause signal interference. Note Refer to the Positioning Your Wireless Products section on page 1-10 for additional guidelines on achieving optimum placement of your workstation. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 2-6 OL-0795-01 C H A P T E R 3 Installing the Client Adapter This chapter provides instructions for installing a client adapter and the client utilities. The following topics are covered in this section:
Inserting the Client Adapter into a Computing Device, page 3-2 Installing the Correct Driver, page 3-6 Installing the Client Utilities and Enabling LEAP or EAP, page 3-30
Verifying Installation, page 3-33 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-1 Inserting the Client Adapter into a Computing Device Chapter 3 Installing the Client Adapter Inserting the Client Adapter into a Computing Device Note If you are running Windows 95, 98, NT, or 2000 and a Cisco Aironet client adapter was previously installed on your computer with the 6.10 driver, you must remove this driver before you can insert your new client adapter and install its more recent driver. Refer to the Removing the 6.10 Driver section on page 4-10 for instructions. This section provides instructions for inserting a PC card or a PCI client adapter into a computing device. Caution These procedures and the physical connections they describe apply generally to conventional PC card slots and PCI expansion slots. In cases of custom or nonconventional equipment, be alert to possible differences in PC card slot and PCI expansion slot configurations. Inserting a PC Card Step 1 Before you begin, examine the PC card. One end has a dual-row, 68-pin PC card connector. The card is keyed so it can be inserted only one way into the PC card slot. Note The PC card slot is on the left or right side of the computer, depending on the model. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-2 OL-0795-01 Chapter 3 Installing the Client Adapter Inserting the Client Adapter into a Computing Device Step 2 Follow the instructions below for your specific operating system:
Windows 95 The Windows 95 driver files are contained in a self-extracting executable file on the Cisco Aironet Series Wireless LAN Adapters CD. Before you insert the client adapter, you must copy this file to a floppy disk or to a directory on your hard drive. Go to the Installing the Driver for Windows 95 section on page 3-7.
Windows 98, Windows 2000, Windows Me, or Linux Turn on your computer, let the operating system boot up completely, and follow the remaining steps in this section to insert the PC card.
Windows NT Turn off your computer, follow the remaining steps in this section to insert the PC card, and reboot your computer.
Windows CE and MacOS 9.x The driver and client utilities must be installed before you insert the PC card. Go to the Installing the Correct Driver section on page 3-6. Caution Do not force the PC card into your computers PC card slot. Forcing it will damage both the card and the slot. If the PC card does not insert easily, remove the card and reinsert it. Step 3 Hold the PC card with the Cisco logo facing up and insert it into the PC card slot, applying just enough pressure to make sure it is fully seated (see Figure 3-1). Figure 3-1 Inserting a PC Card into a Computing Device OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-3 Inserting the Client Adapter into a Computing Device Chapter 3 Installing the Client Adapter Step 4 Go to the Installing the Correct Driver section on page 3-6 to install the driver for your computers operating system. Note You can remove and reinsert your PC card when necessary. Refer to the Removing a PC Card section on page 4-24 for instructions. Inserting a PCI Client Adapter Step 1 Step 2 Turn off the PC and all its components. Remove the computer cover. Note On most Pentium PCs, PCI expansion slots are white. Refer to your PC documentation for slot identification. Step 3 Remove the screw from the top of the CPU back panel above an empty PCI expansion slot. This screw holds the metal bracket on the back panel. Caution Step 4 Static electricity can damage your client adapter. Before removing the adapter from the anti-static packaging, discharge static by touching a metal part of a grounded PC. Examine the client adapter. The antenna connector and the LEDs face out of your computer and are visible when you put the cover back on. The bottom edge of the adapter is the connector you will insert into an empty expansion slot in your computer. See Figure 3-2. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-4 OL-0795-01 Chapter 3 Installing the Client Adapter Inserting the Client Adapter into a Computing Device Figure 3-2 Inserting a PCI Client Adapter into a PC Antenna connector LEDs Card edge connector Standard 2 dBi dipole antenna 1 2 5 7 4 Step 5 Tilt the adapter to allow the antenna connector and LEDs to slip through the opening in the CPU back panel. Step 6 Press the client adapter into the empty slot until the connector is firmly seated. Caution Do not force the adapter into the expansion slot as this could damage both the adapter and the slot. If the adapter does not insert easily, remove the adapter and reinsert it. Step 7 Step 8 Reinstall the screw on the CPU back panel and replace the computer cover. Attach the 2-dBi antenna to the adapters antenna connector until it is finger-tight. Do not overtighten. Step 9 For optimal reception, position the antenna so it is straight up. Step 10 Boot up your computer. Note Because PCI client adapters are installed inside desktop computers, you should have little reason to remove the adapter. However, instructions are provided in the Removing a PCI Client Adapter section on page 4-24 in case you ever need to remove your PCI client adapter. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-5 Installing the Correct Driver Chapter 3 Installing the Client Adapter Installing the Correct Driver Note Before you begin the driver installation process, make sure you have the installation disks for your computers operating system nearby. Some operating system files may be needed to complete the driver installation. The driver you use for your client adapter depends on which operating system your computer is running. This section provides instructions for installing the correct driver for your operating system. Use Table 3-1 to quickly locate the installation instructions for your specific operating system. Table 3-1 Locating Driver Installation Instructions Operating System Windows 95 Windows 98 Windows NT Windows 2000 Windows Millennium Edition (Me) Windows CE Linux MacOS 9.x Page Number 3-7 3-11 3-13 3-14 3-16 3-18 3-24 3-27 The procedures in this section assume you are installing the driver from the CD provided. If your computer does not have a CD-ROM drive, download the driver from Ciscos web site at http://www.cisco.com/public/sw-center/
sw-wireless.shtml. Under Wireless Software Products - Cisco Aironet Drivers and Utilities, select your computers operating system and the appropriate driver. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-6 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Installing the Driver for Windows 95 Note Windows 95 limits your computers network connections to four. If you try to install a client adapter when four network devices (such as a PCMCIA Ethernet card, dial-up adapter, VPN adapter, docking station Ethernet card, etc.) are already connected to your computer, the new adapter cannot establish a network connection. The driver installation instructions vary for Windows 95 Version A and Version B. You can determine which version your computer is running by selecting My Computer, Control Panel, System, and General. The version of your computers operating system is located under the System heading. If you have Windows 95 Version B, the version number ends with the letter B.
For Windows 95 Version A driver installation instructions, go to the Windows 95 Version A section below.
For Windows 95 Version B driver installation instructions, go to the Windows 95 Version B section on page 3-9. Windows 95 Version A If your computers operating system is Windows 95 Version A, follow these steps. Step 1 Step 2 Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Copy the Win95Driver.exe file from the Win95 directory on the CD to a floppy disk or to a directory (other than the root directory) on your computers hard drive. Step 3 Remove the CD from your computers CD-ROM drive. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-7 Installing the Correct Driver Chapter 3 Installing the Client Adapter Step 4 Locate the Win95Driver.exe file on your floppy disk or in a directory on your hard drive and double-click it to extract the driver files. Unless you specify a different location, the files are placed on the floppy disk. Note Do not extract the files to the root directory of your hard drive. Windows 95 is unable to read them from this location. Step 5 Step 6 Step 7 Step 8 Follow the instructions in the Inserting the Client Adapter into a Computing Device section on page 3-2 to insert the client adapter. After you insert the client adapter into your computing device, Windows automatically detects it and opens the New Hardware Found window. Select Driver from disk provided by hardware manufacturer and click OK. In the Install From Disk window, enter the path to the location where you extracted the Windows 95 driver files. The default is A:\, so if you extracted the files to the root directory on a floppy disk, you do not have to enter a path. If, however, you extracted the files to a directory on your hard drive, you must enter the entire path (for example, C:\Win95). Step 9 Click OK. Step 10 If you are prompted to insert the Windows 95 operating system disk, click OK and do one of the following:
If the Windows 95 operating system files are installed on your computer, they are usually located in the C:\Windows\Options\Cabs folder. Type C:\Windows\Options\Cabs in the Copy files from dialog box. Click OK to copy the required files. If Windows 95 prompts for the Windows 95 operating system CD, insert this CD into your CD-ROM drive. If your CD-ROM drive is drive D, the path in the dialog box should be D:\Win95. Click OK to copy the required files. Step 11 After the files are copied, remove any disks from your computer. Step 12 Double-click My Computer, Control Panel, and Network. Step 13 Select the Cisco Systems wireless LAN adapter and click Properties. Step 14 Step 15 In the client adapter Properties window, click the Advanced tab. Select Client Name. Type your computers unique client name in the Value dialog box. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-8 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Step 16 Step 17 Step 18 Select SSID. Type your RF networks (case-sensitive) SSID in the Value dialog box. Click OK. If you are prompted to restart your computer, click Yes. If you are not connected to a DHCP server, double-click My Computer, Control Panel, and Network. Select TCP/IP -> Cisco Systems Wireless LAN Adapter. Click the Properties button, select Specify an IP address, and enter the IP address, subnet mask, and default gateway address of your computer
(which can be obtained from your system administrator). Click OK twice. When prompted to restart your computer, click Yes. The driver installation is complete. Windows 95 Version B If your computers operating system is Windows 95 Version B, follow these steps. Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Copy the Win95Driver.exe file from the Win95 directory on the CD to a floppy disk or to a directory (other than the root directory) on your computers hard drive. Remove the CD from your computers CD-ROM drive. Locate the Win95Driver.exe file on your floppy disk or in a directory on your hard drive and double-click it to extract the driver files. Unless you specify a different location, the files are be placed on the floppy disk. Note Do not extract the files to the root directory of your hard drive. Windows 95 is unable to read them from this location. Follow the instructions in the Inserting the Client Adapter into a Computing Device section on page 3-2 to insert the client adapter. After you insert the client adapter into your computing device, Windows automatically detects it and briefly opens the New Hardware Found window. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-9 Installing the Correct Driver Chapter 3 Installing the Client Adapter Step 7 Step 8 Step 9 The Update Device Driver Wizard dialog box opens and indicates that Windows will complete the installation of the client adapter. Click Next. If the Update Device Driver Wizard indicates that Windows was unable to locate a driver for the client adapter, click Other Locations. In the Select Other Location window, enter the path to the location where you extracted the Windows 95 driver files. The default is A:\, so if you extracted the files to the root directory on a floppy disk, you do not have to enter a path. If, however, you extracted the files to a directory on your hard drive, you must enter the entire path (for example, C:\Win95). Step 10 Click OK. Step 11 When the Update Device Driver Wizard indicates that it has found the driver, click Finish. Step 12 When the Insert Disk window appears prompting you to insert the Aironet Wireless LAN Adapter Installation Disk, click OK. Step 13 Step 14 If a windows appears indicating that the pcx500.sys file could not be found, enter the same path that you entered in Step 9 and click OK. If you are prompted to insert the Windows 95 operating system disk, click OK and do one of the following:
If the Windows 95 operating system files are installed on your computer, they are usually located in the C:\Windows\Options\Cabs folder. Type C:\Windows\Options\Cabs in the Copy files from dialog box. Click OK to copy the required files. If Windows 95 prompts for the Windows 95 operating system CD, insert this CD into your CD-ROM drive. If your CD-ROM drive is drive D, the path in the dialog box should be D:\Win95. Click OK to copy the required files. Step 15 When prompted to restart your computer, remove any disks and click Yes. Step 16 When the computer restarts, double-click My Computer, Control Panel, and Network. Step 17 Select the Cisco Systems wireless LAN adapter and click Properties. Step 18 Step 19 Step 20 In the client adapter Properties window, click the Advanced tab. Select Client Name. Type your computers unique client name in the Value dialog box. Select SSID. Type your RF networks (case-sensitive) SSID in the Value dialog box. Click OK. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-10 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Step 21 If you are not connected to a DHCP server, double-click My Computer, Control Panel, and Network. Select TCP/IP -> Cisco Systems Wireless LAN Adapter. Click the Properties button, select Specify an IP address, and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). Click OK. In the Network window, click OK. Step 22 Step 23 When prompted to restart your computer, click Yes. The driver installation is complete. Installing the Driver for Windows 98 Note Windows 98 limits your computers network connections to eight. If you try to install a client adapter when eight network devices (such as a PCMCIA Ethernet card, dial-up adapter, VPN adapter, docking station Ethernet card, etc.) are already connected to your computer, the new adapter cannot establish a network connection. If your computers operating system is Windows 98, follow these steps. Step 1 After you insert the client adapter into your computing device, Windows automatically detects it, briefly opens the New Hardware Found window, and starts collecting information for a driver information database. Step 2 Step 3 Step 4 The Add New Hardware Wizard dialog box opens and indicates that Windows is searching for new drivers. Click Next. Another dialog box opens and asks what you want Windows to do. Select Search for the best driver for your device (Recommended) and click Next. Select CD-ROM drive, deselect all other options, insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive, and click Next. The hardware wizard finds the installation files on the CD and displays the search results. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-11 Installing the Correct Driver Chapter 3 Installing the Client Adapter Step 5 When the client adapter driver is displayed, click Next to copy the required files. Step 6 During driver installation, you may be prompted to enter a path to the Windows 98 operating system files. If so, do one of the following:
If the Windows 98 operating system files are installed on your computer, they are usually located in the C:\Windows\Options\Cabs folder. Type C:\Windows\Options\Cabs in the Copy files from dialog box. Click OK to copy the required files. If Windows 98 prompts for the Windows 98 operating system CD, insert this CD into your CD-ROM drive. If your CD-ROM drive is drive D, the path in the dialog box should be D:\WIN98. Click OK to copy the required files. Step 7 The Add New Hardware Wizard window opens and indicates that the installation is complete. Click Finish. Step 8 When prompted to restart your computer, remove the CD and click Yes. Step 9 When the computer restarts, double-click My Computer, Control Panel, and Network. Step 10 Step 11 Step 12 Step 13 Step 14 Select the Cisco Systems wireless LAN adapter and click Properties. In the client adapter Properties window, click the Advanced tab. Select Client Name. Type your computers unique client name in the Value dialog box. Select SSID. Type your RF networks (case-sensitive) SSID in the Value dialog box. Click OK. If you are not connected to a DHCP server, double-click My Computer, Control Panel, and Network. Select TCP/IP -> Cisco Systems Wireless LAN Adapter. Click the Properties button, select Specify an IP address, and enter the IP address, subnet mask, and default gateway address of your computer
(which can be obtained from your system administrator). Click OK. Step 15 In the Network window, click OK. Step 16 When prompted to restart your computer, click Yes. The driver installation is complete. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-12 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Installing the Driver for Windows NT Note This procedure requires that your computer has Windows NT Service Pack 3 or greater. If your computers operating system is Windows NT, follow these steps. Step 1 If an error message appears indicating that at least one service or driver failed during system setup, click OK. Step 2 Follow the steps below to obtain an available interrupt request (IRQ):
a. Select Start > Programs > Administrative Tools > Windows NT Diagnostics. b. Click the Resources tab. c. The used IRQs are listed in numerical order along the left side of the Resources window. Write down the number of an IRQ that is not being used. You will need this IRQ for Step 12. Step 3 On your computer desktop, double-click My Computer, Control Panel, and Devices. Scroll down and select Pcmcia. Click Startup, select Automatic, and click OK. Note For PC cards, also ensure that the Cardbus service is deselected. Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Double-click My Computer, Control Panel, and Network. Click the Adapters tab and select Add. In the Select Network Adapter window, click Have Disk. In the Insert Disk window, enter the letter of your CD-ROM drive (such as D:\) and click OK. In the Select OEM Option box, select the Cisco Systems wireless LAN adapter and click OK. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-13 Installing the Correct Driver Chapter 3 Installing the Client Adapter Step 10 Step 11 In the Adapter Setup window, select Client Name. Type your computers unique client name in the Value dialog box. Select SSID. Type your RF networks (case-sensitive) SSID in the Value dialog box. Step 12 Enter an available IRQ number, which you obtained in Step 2. Step 13 Click OK and Close. Step 14 The Microsoft TCP/IP Properties window should open. If it does not open, double-click My Computer, Control Panel, and Network. Select Protocols, TCP/IP, and Properties. Step 15 Perform one of the following:
If you are connected to a DHCP server, select Obtain an IP address from a DHCP server. When asked if you want to enable DHCP, click Yes and OK. If you are not connected to a DHCP server, select Specify an IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). Click OK. Step 16 When prompted to restart your computer, remove the CD and click Yes. The driver installation is complete. Installing the Driver for Windows 2000 If your computers operating system is Windows 2000, follow these steps. Step 1 After you insert the client adapter into your computing device, Windows 2000 automatically detects it and briefly opens the Found New Hardware window. The Found New Hardware Wizard window opens and indicates that the wizard will help you to install the driver. Step 2 Step 3 Click Next. Another window opens and asks what you want the wizard to do. Select Search for a suitable driver for my device (recommended) and click Next. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-14 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Step 4 Select CD-ROM drives, deselect all other options, insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive, and click Next. The wizard finds the installation files on the CD and displays the search results. Step 5 When the client adapter driver is displayed, click Next to copy the required files. Step 6 When you receive a message indicating that Windows has finished the installation, click Finish. Step 7 Step 8 Step 9 Remove the CD from your computers CD-ROM drive. Double-click My Computer, Control Panel, and System. In the System Properties window, click the Hardware tab. Step 10 Click Device Manager. Step 11 In the Device Manager window, double-click Network Adapters. Step 12 Right-click the Cisco Systems wireless LAN adapter. Step 13 Click Properties. Step 14 In the client adapter Properties window, click the Advanced tab. Step 15 Step 16 Step 17 In the Advanced window, select Client Name. Type your computers unique client name in the Value dialog box. Select SSID. Type your RF networks (case-sensitive) SSID in the Value dialog box. Click OK. If you are not connected to a DHCP server, follow these steps:
a. Double-click My Computer, Control Panel, and Network and Dial-up Connections. b. Right-click Local Area Connection. c. Click Properties, Internet Protocol (TCP/IP), and Properties. d. Click Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). Click OK. e. In the Local Area Connection Properties window, click OK. Step 18 If you are prompted to restart your computer, click Yes. The driver installation is complete. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-15 Installing the Correct Driver Chapter 3 Installing the Client Adapter Installing the Driver for Windows Millennium Edition (Me) The first release of Windows Me comes with driver version 6.15, which is installed automatically the first time you insert a client adapter. To upgrade to the driver provided with your new client adapter, follow these steps. Step 1 Make sure the client adapter is in your computer and the computer is booted up. Note If this is the first time you are inserting a client adapter into your computing device, Windows Me automatically detects it, updates the hardware information database, and installs driver version 6.15. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Double-click My Computer, Control Panel, System, the Device Manager tab, and Network Adapters. Select the Cisco Aironet wireless LAN adapter. Click Properties. In the client adapter Properties window, click the Driver tab. Click the Update Driver button. The Update Device Driver Wizard window appears. Select Specify the location of the driver (Advanced) and click Next. Select Search for a better driver than the one your device is using now
(Recommended). Step 9 Make sure the Removable Media checkbox is deselected. Step 10 Select the Specify a location checkbox and click the Browse button. Step 11 Locate your computers CD-ROM drive and click Next. Step 12 When asked what you would like to install, select The updated driver
(recommended) and click Next. Step 13 When a screen appears indicating the driver that will be installed and its location, click Next. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-16 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Step 14 If Windows cannot find the pcx500.sys file and requests that you insert the CD
(even though the CD is already in your computers CD-ROM drive), enter the letter of your CD-ROM drive (such as D:) in the Copy files from dialog box and click OK. Step 15 When you are notified that the installation is complete, click the Finish button. Step 16 When you are prompted to restart your computer, remove the CD and click No. Step 17 Double-click My Computer, Control Panel, and Network. Step 18 Select the Cisco Systems wireless LAN adapter. Click Properties. Step 19 In the client adapter Properties window, click the Advanced tab. Step 20 Step 21 Step 22 In the Advanced window, select Client Name. Type your computers unique client name in the Value dialog box. Select SSID. Type your RF networks (case-sensitive) SSID in the Value dialog box. Click OK. If you are not connected to a DHCP server, double-click My Computer, Control Panel, and Network. Select TCP/IP -> Cisco Systems Wireless LAN Adapter. Click the Properties button, select Specify an IP address, and enter the IP address, subnet mask, and default gateway address of your computer
(which can be obtained from your system administrator). Click OK. Step 23 In the Network window, click OK. Step 24 When prompted to restart your computer, click Yes. The driver installation is complete. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-17 Installing the Correct Driver Chapter 3 Installing the Client Adapter Installing the Driver for Windows CE Note Windows CE devices do not support PCI client adapters. The driver installation instructions vary depending on which version of Windows CE you are running, and the files you install vary depending on your devices processor. To determine the Windows CE version and the processor type, follow the instructions in the Determining Windows CE Version and Processor Type section below. Determining Windows CE Version and Processor Type Step 1 Perform one of the following:
If your Windows CE device is a pocket PC (ppc) device, select Start >
Settings > the System tab > About. The Windows CE version and the processor type are displayed. Go to Step 4. If your Windows CE device is a hand-held (hpc) device, select Start >
Settings > Control Panel > System. Go to Step 2. Step 2 Step 3 In the System Properties window, select the Device tab. The processor type is displayed (such as MIPS 4000 Family). Select the System tab. The core system version indicates the version of Windows CE that the device is running (such as 2.11). Step 4 For Windows CE 2.11, go to the Windows CE 2.11 section on page 3-19. For Windows CE 3.00, go to the Windows CE 3.00 section on page 3-21. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-18 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Windows CE 2.11 If your computer is running Windows CE 2.11, follow these steps. Step 1 Use a serial or USB cable to connect your Windows CE device to a laptop or PC running Active Sync. A message appears on the Windows CE device indicating that it is connecting to the host. After the Windows CE device is connected, the New Partnership window appears on the laptop or PC. This window asks if you want to set up a partnership. Step 2 Perform one of the following:
If you want to establish a partnership that allows you to synchronize files between the laptop or PC and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to specify the files to be synchronized and to finish setting up the partnership. If you do not want to synchronize files and want to connect as a guest, select No and click Next. The screen indicates that you are connected as a guest. Insert the Cisco Aironet Series Wireless LAN Adapters CD into the laptop or PCs CD-ROM drive. Use Windows Explorer to browse the CD and locate the aironet.dll file and the
*.htm (help) files in the directory structure that corresponds to the device and processor type of your Windows CE device. Example:
If you are running Windows CE 2.11 on a MIPS processor, the appropriate aironet.dll file and the help files would be located in the following directory structure: WinCE\Ce2.11\Mips. Drag and drop the appropriate aironet.dll file and the help files from the CD to the
\Windows directory on the Windows CE device. On the Windows CE device, create a folder entitled Cisco in the
\Windows\Programs directory. Creating this folder will enable you to access the client utilities from Start > Programs > Cisco after the utilities are installed. Step 3 Step 4 Step 5 Step 6 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-19 Installing the Correct Driver Chapter 3 Installing the Client Adapter Step 7 Drag and drop the client utility files, which have an .exe extension, from the CD to the \Windows\Programs\Cisco directory of the Windows CE device. The client utility files are located in a directory specific to the Windows CE version and processor type. Example: The client utility files for Windows CE 2.11 on a MIPS processor would be located in the following directory structure:
WinCE\Ce2.11\Mips. Step 8 Step 9 Step 10 After the files are copied, remove the CD. Disconnect the Windows CE device and reboot it. Follow the instructions in the Inserting the Client Adapter into a Computing Device section on page 3-2 to insert the client adapter into the PC card slot of the Windows CE device. The Unidentified PCCard Adapter dialog box appears with the driver name set to Network card in Socket X. If the driver name is set to anything other than a network card, remove the client adapter, reset the Windows CE device, and reinsert the client adapter. Step 11 Type aironet for the driver name and click OK. The Windows CE device should configure the client adapter, and the green LED on the adapter should blink. If this does not happen, remove the client adapter, reset the Windows CE device, and go back to Step 10. Step 12 The Aironet Wireless LAN Adapter Settings dialog box appears. Perform one of the following:
If you are connected to a DHCP server, select Obtain an IP address via DHCP or Use server-assigned IP address and click OK. If you are not connected to a DHCP server, select Specify an IP address or Use specific IP address and follow the steps below:
a. Enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). b. Select the Name Servers tab and enter the primary and secondary DNS and WINS for your computer (which can be obtained from your system administrator). c. Click OK. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-20 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Step 13 Step 14 Step 15 Step 16 Select Start > Programs > Cisco > Aironet Client Utility to open the Aironet Client Utility (ACU). Select Client Name under Property. Type your Windows CE devices unique client name in the Value dialog box. Select SSID under Property. Type your RF networks case-sensitive SSID in the Value dialog box. Select Data Rates under Property. Make sure Auto is selected in the list of options in the Value dialog box. Step 17 Click OK. Step 18 Step 19 If prompted, eject the client adapter and reinsert it for the changed settings to take effect. The driver and client utility installation is complete. Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions on how to use each utility. Windows CE 3.00 If your computer is running Windows CE 3.00, follow these steps. Step 1 Use a serial or USB cable to connect your Windows CE device to a laptop or PC running Active Sync. A message appears on the Windows CE device indicating that it is connecting to the host. After the Windows CE device is connected, the New Partnership window appears on the laptop or PC. This window asks if you want to set up a partnership. Step 2 Choose one of the following options:
If you want to establish a partnership that allows you to synchronize files between the laptop or PC and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to specify the files to be synchronized and to finish setting up the partnership. If you do not want to synchronize files and want to connect as a guest, select No and click Next. The screen indicates that you are connected as a guest. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-21 Installing the Correct Driver Chapter 3 Installing the Client Adapter Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Insert the Cisco Aironet Series Wireless LAN Adapters CD into the laptop or PCs CD-ROM drive. Use Windows Explorer to browse the CD and locate the *.cab file in the directory structure that corresponds to the device and processor type of your Windows CE device. Example:
If you are running Windows CE 3.00 on a pocket PC device with a StrongARM processor, the appropriate *.cab file would be located in the following directory structure: WinCE\Ce3.00\SA11xx and would look something like SA11xxPPC30v131.cab, where SA11xx indicates the processor type, PPC30 represents Windows CE version 3.00 on a pocket PC device, and v131 indicates the driver version. Drag and drop the appropriate *.cab file from the CD to the root directory (called My Pocket PC or My Handheld PC) on the Windows CE device. The File Conversion window appears indicating that some files may need to be converted. Click OK. After the *.cab file is copied to the Windows CE device, remove the CD from the laptop or PC and disconnect the Windows CE device. On your Windows CE device, open File Explorer or Windows Explorer and locate the *.cab file in the root directory. Click the *.cab file to execute it. The cisco.dll driver is installed in the \Windows directory, the client utilities are extracted to the Windows\Start Menu\
Programs\Cisco directory, and the *.cab file is removed. Step 10 Follow the instructions in the Inserting the Client Adapter into a Computing Device section on page 3-2 to insert the client adapter into the PC card slot of the Windows CE device. The Windows CE device should configure the client adapter, and the green LED on the adapter should blink. If this does not happen, remove the client adapter, reset the Windows CE device, and reinsert the client adapter. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-22 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Step 11 The Cisco Wireless LAN Adapter Settings dialog box appears.
If you are connected to a DHCP server, select Obtain an IP address via DHCP or Use server-assigned IP address and click OK. If you are not connected to a DHCP server, select Specify an IP address or Use specific IP address and follow the steps below:
a. Enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). b. Select the Name Servers tab and enter the primary and secondary DNS and WINS for your computer (which can be obtained from your system administrator). c. Click OK. Step 12 Step 13 Step 14 Step 15 Select Start > Programs > Cisco > Aironet Client Utility to open the Aironet Client Utility (ACU). Select Client Name under Property. Type your Windows CE devices unique client name in the Value dialog box. Select SSID under Property. Type your RF networks case-sensitive SSID in the Value dialog box. Select Data Rates under Property. Make sure Auto is selected in the list of options in the Value dialog box. Step 16 Click OK. Step 17 The driver and client utility installation is complete. Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions on how to use each utility. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-23 Installing the Correct Driver Chapter 3 Installing the Client Adapter Installing the Driver for Linux Note This procedure can be performed only by root users (those with administrative rights). Note Ciscos Linux driver currently supports version 2.2.xx of the Linux kernel. To determine your kernel version, type uname -a and press Enter. The name of your computer and the Linux kernel version are displayed. For example, in drake.cisco.com 2.2.15-4mak, drake.cisco.com represents your computers name, and 2.2.15 is the kernel version. If your computers operating system is Linux, follow these steps. Step 1 Step 2 Step 3 After you insert the client adapter into your computing device, insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Go to the Linux directory on the CD. Type sh ./cwinstall and press Enter. Step 4 When you are asked to select where you want the client utilities to be installed, perform one of the following:
If you want the files to be installed in the specified default location, press Enter. If you want to specify a different location, enter the desired path and press Enter. Step 5 When you are asked if you already have the source for Card and Socket Services unpacked, perform one of the following:
If you do not already have Card and Socket Services unpacked, type n, press Enter, and go to Step 6. If you already have Card and Socket Services unpacked, type y, press Enter, and go to Step 7. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-24 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Step 6 Version 3.1.21 of Card and Socket Services is provided on the Cisco Aironet Series Wireless LAN Adapters CD. If you want this version to be unpacked into the current directory (or into the /tmp directory if the current directory is read only), type y and press Enter, and go to Step 8. Note If you want to use a different version of Card and Socket Services, you can break away from this installation to obtain a different version from the Internet (at the address specified) and then continue the installation. Step 7 When you are asked if you have already installed Card and Socket Services, perform one of the following:
If you have not installed Card and Socket Services, type n, press Enter, and go to Step 8. If you have already installed Card and Socket Services, type y, press Enter, go to the directory where the file is installed, and type make -f airo_cs.mk install. Go to Step 12. Step 8 Type make config and press Enter. Step 9 When you are prompted to respond to a series of questions, press Enter to accept the default value for each question. Note The default responses for each question are correct for most users. Consult the PCMCIA-HOWTO for additional information about each option. Step 10 After you have responded to each question, type make all and press Enter. Step 11 After the make all command is finished executing, type make install and press Enter. Step 12 Perform one of the following:
If you do not want to limit access to the client utilities to root users (those with administrative rights), no action is required. Proceed to Step 13. If you want only root users to be able to run the client utilities and configure the client adapter, type chmod 500 /path/acu (where path is the exact path to where the utilities were installed in Step 4), press Enter, type chmod 500
/path/cem, and press Enter. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-25 Installing the Correct Driver Chapter 3 Installing the Client Adapter Step 13 Perform one of the following:
If you want your computers IP address to be assigned by DHCP and your network has a DHCP server, you must run a DHCP client utility. The two most popular client utilities are DHCP CD and Pump. Most Linux distributions should have one of them. If you have neither, you must install it from your distribution CD-ROM or download one from the Internet. Refer to your distribution's home page for more information. If your computer is not connected to a DHCP server, follow the steps below to enter the IP address, subnet mask, and default gateway address of your computer. a. Perform one of the following:
If you want to set the IP address and have the system determine the broadcast address and subnet mask, type ifconfig ethx IP address
(where x is the number of your client adapter and IP address is your computers IP address) and press Enter. If you want to set the IP address and manually set the broadcast address and subnet mask, type ifconfig ethx IP address broadcast broadcast address netmask netmask (where x is the number of your client adapter, IP address is your computers IP address, broadcast address is the corresponding broadcast address, and netmask is your subnet mask) and press Enter. Note Your client adapters number is zero (0) if it is the only Ethernet adapter card installed. The Device field of the Status screen in the Aironet Client Utility (ACU) indicates the number of the adapter being used. b. To enter the default gateway address, type route add default gw IP address of gateway netmask 0.0.0.0 metric 1 (where IP address of gateway is your default gateway address) and press Enter. Step 14 Remove the CD and reboot your computer. Step 15 The driver and client utility installation is complete. Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions on how to use each utility. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-26 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Note Linux allows you to install the drivers for more than one client adapter and to then select between the adapters. (Up to two PC cards and up to five PCI client adapters can be supported.) To install the driver for another client adapter, you can follow the previous instructions; however, the process will be abbreviated now that some files are already installed. After the drivers and the client utilities are installed, you can switch back and forth between the client adapters using the Select Radio parameter in ACU. See the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for information on using this parameter. Installing the Driver for MacOS 9.x Note Cisco Aironet PCI client adapters are not supported for use with Apple computers. If you are using an Apple PowerBook G3 running MacOS 9.x, follow these steps. Step 1 Step 2 Step 3 Step 4 Boot up your PowerBook. Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. The Cisco pc3x0 icon appears on the desktop. Double-click the Cisco pc3x0 icon. The Cisco pc3x0 window appears. Double-click the Installer icon. If a window appears indicating that the installation cannot occur with other applications running, click the Continue button. Step 5 When the Cisco Wireless LAN Adapter Software screen appears, click Continue. The Install window appears. The application and driver for the Power Macintosh is shown in the middle of the window, and the proposed destination of the files to be copied is shown in the Destination Folder in the bottom left corner of the window. If you want to specify a different folder, click the Select Folder button and choose a different location. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-27 Installing the Correct Driver Chapter 3 Installing the Client Adapter Step 6 Click the Install button in the bottom right corner of the window. Step 7 When a window appears informing you that the installation requires a restart of your computer, click the Continue button. Step 8 Step 9 After the files are copied to the designated folder in Macintosh HD, a window appears indicating that the installation was successful. Click the Restart button. After your computer reboots, follow the instructions in the Inserting the Client Adapter into a Computing Device section on page 3-2 to insert the client adapter into your PowerBooks PC card slot. The Cisco Wireless LAN Adapter icon appears on the desktop. Step 10 Click the apple-shaped icon in the top left corner of the desktop. Step 11 Select Control Panels > AppleTalk. The AppleTalk window appears. Step 12 Make sure the name of the correct wireless LAN adapter appears in the Connect via dialog box. If it does not, click the up or down arrow on the right side of the Connect via dialog box and select the correct adapter. Step 13 Close the AppleTalk window. Step 14 Click the apple-shaped icon in the top left corner of the desktop. Step 15 Select Control Panels > TCP/IP. The TCP/IP window appears. Step 16 Select Cisco Wireless LAN Adapter in the Connect via drop-down box. Step 17 Perform one of the following:
If you are connected to a DHCP server, select Using DHCP Server in the Configure drop-down box and type your computers unique client name in the DHCP Client ID field. If you are not connected to a DHCP server, select Manually in the Configure drop-down box and enter the IP address, subnet mask, router address, name server address, and search domains of your computer (which can be obtained from your system administrator). Only the IP address and subnet mask are required. Step 18 Close the TCP/IP window. Step 19 When a window appears asking if you want to save changes to the current configuration, click the Save button. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-28 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Correct Driver Step 20 Double-click the Macintosh HD icon on the desktop. The Macintosh HD window appears. Step 21 Double-click the Cisco pcm3x0 Folder icon. The Cisco pcm3x0 Folder window appears. Step 22 Double-click the pcm3x0PPC icon. The Cisco pcm3x0 window appears, and the computer searches for the client adapter. After the adapter is found, the Cisco pcm3x0 - Basic Properties window appears. Step 23 Under Radio, make sure that radio status is on. If it is off, click the Turn radio on button. Step 24 Perform one of the following:
If your computer is in an infrastructure network, select Computer to base station in the Network subwindow. If your computer is in a peer-to-peer (ad hoc) network, select Computer to computer in the Network subwindow. Type your RF networks (case-sensitive) SSID in the SSID dialog box. Step 25 Step 26 Click OK. Step 27 Step 28 Eject the CD by clicking the CD icon on the desktop and dragging it to the trash can. The driver and client utility installation is complete. Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions on how to use the client utility. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-29 Installing the Client Utilities and Enabling LEAP or EAP Chapter 3 Installing the Client Adapter Installing the Client Utilities and Enabling LEAP or EAP Note This section provides instructions for installing the client utilities and enabling LEAP or EAP for Windows 95, 98, NT, 2000, and Me. If your computer is using a Windows CE, Linux, or Macintosh operating system, the client utilities are installed with the driver (see the Installing the Correct Driver section on page 3-6), and LEAP is enabled through the client utilities (refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions). After you have installed the appropriate driver for your computers operating system, you can install the Aironet Client Utility (ACU), Link Status Meter
(LSM), and Client Encryption Manager (CEM) utilities. ACU allows you to configure the client adapter, enable server-based authentication, and enable the Wired Encryption Privacy (WEP) feature; LSM provides troubleshooting and status information; and CEM enables you to set one or more WEP keys for your client adapter. Note The following procedure assumes you are installing the client utilities from the CD provided. If your computer does not have a CD-ROM drive, download the utilities from Ciscos web site at http://www.cisco.com/public/sw-center/sw-wireless.shtml. Under Wireless Software Products - Cisco Aironet Drivers and Utilities, select your computers operating system and the appropriate utility. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-30 OL-0795-01 Chapter 3 Installing the Client Adapter Installing the Client Utilities and Enabling LEAP or EAP Follow the steps below to install the client utilities for Windows 95, 98, NT, 2000 or Me. Step 1 Step 2 Step 3 Close any Windows programs that are running. Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Select Start > Run and enter the following path (where D is the letter of your CD-ROM drive): D:\Utilities\ACU\setup.exe. Step 4 When the Welcome screen appears, click Next. Step 5 In the Authentication Method screen, select the server-based authentication method preferred for wireless network access in your location and click Next:
If you select None (the default value), server-based authentication is not enabled for your client adapter. After the client utilities are installed, you can elect not to implement any security features, or you can activate some level of security by using WEP keys. Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions on setting WEP keys using CEM and enabling WEP through ACU. If you select LEAP, LEAP is enabled on your client adapter, provided an EAP-enabled RADIUS server is running on your network. After LEAP is enabled and your computer is rebooted, your client adapter authenticates to the RADIUS server using your network logon and receives a session-based WEP key. If you select EAP, EAP is enabled on your client adapter, provided an EAP-enabled RADIUS server is running on your network. If your computer is not using an operating system with built-in EAP support, this option is not available. After EAP is enabled and your computer is rebooted, your client adapter authenticates to the RADIUS server using your network logon and receives a session-based WEP key. Step 6 In the Select Components screen, make sure the client utilities that you want to install are selected and any that you do not want to install are deselected. Click Next. Step 7 In the Select Program Folder screen, click Next to allow icons for the client utilities to be placed in the Cisco Systems, Inc. folder. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-31 Installing the Client Utilities and Enabling LEAP or EAP Chapter 3 Installing the Client Adapter Step 8 In the Setup Complete screen, perform one of the following:
If you selected no server-based authentication in Step 5, select Launch the Aironet Client Utility and click Finish. ACU opens so you can configure your client adapter. If you selected LEAP or EAP server-based authentication in Step 5, select Yes, I want to restart my computer now, remove the CD from your computers CD-ROM drive, and click Finish. When the computer reboots, enter your username and password at the network logon screen. Following the sequence of events described in the EAP and LEAP section on page 1-6, the client adapter is authenticated and assigned a session-based WEP key, provided your client adapter is configured to associate to an EAP-enabled Access Point. Step 9 Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for instructions on how to use each utility. Note Note Note Icons are automatically added to the desktop when you install the client utilities. If you wish to remove these icons from your desktop, right-click the icon, click Delete, and click Yes to confirm your decision. To install or use the client utilities on Windows NT or Windows 2000 systems, you must log onto the system as a user with administrative privileges. The utilities do not install or operate correctly for users not logged in with administrative rights. If you ever need to uninstall the client utilities and the Aironet Client Utility setup program, follow the instructions in the Uninstalling the Client Utilities and the Aironet Client Utility Setup Program section on page 4-25. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-32 OL-0795-01 Chapter 3 Installing the Client Adapter Verifying Installation Note After LEAP or EAP is enabled on your client adapter, you can enable or disable it at any time using ACU. Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for more information. Verifying Installation To verify that you have properly installed the appropriate driver and client utilities, perform one of the following:
If your computers operating system is Windows 95, 98, NT, 2000, or Me, open ACU by double-clicking the ACU icon on your desktop. If the installation was successful, the bottom left corner of the Aironet Client Utility screen indicates that your client adapter is associated to its Access Point. If your computers operating system is Windows CE 2.11 or 3.0, open ACU by selecting Start > Programs > Cisco > Aironet Client Utility. If the installation was successful, the bottom of the ACU screen indicates that your client adapter is associated to its Access Point. If your computers operating system is Linux, go to the directory where the utilities were installed and type acu to open ACU. If the installation was successful, the bottom left corner of the Aironet Client Utility screen indicates that your client adapter is associated to its Access Point. If your computers operating system is MacOS 9.x, double-click the pcm3x0PPC icon in the Cisco pcm3x0 folder to open the pcm3x0PPC client utility. If the installation was successful, the top of the Basic Properties screen indicates that your client adapter is associated to its Access Point. To verify that your client adapter is authenticated and has received a session-based WEP key (if you are running Windows 95, 98, NT, 2000, or Me and you enabled LEAP or EAP on your client adapter), check the system tray on your desktop. The WepStat icon, which looks like two connected computers, should appear in the system tray and indicate that LEAP or EAP is authenticated and WEP is enabled. In addition, LEAP or EAP and Enable WEP should be selected in the Network Security screen in ACU. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-33 Verifying Installation Chapter 3 Installing the Client Adapter Note If your computers operating system is Windows CE, Linux, or MacOS 9.x, LEAP is enabled through the client utilities, not during the installation of the utilities. For information on enabling LEAP and verifying authentication for client adapters that are used with these operating systems, refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide. Note If your installation was unsuccessful or you experienced problems during or after driver installation, refer to Chapter 4 for troubleshooting tips. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3-34 OL-0795-01 C H A P T E R 4 Troubleshooting and Routine Procedures This chapter provides general information for diagnosing and correcting common problems encountered when installing or operating a Cisco Aironet Wireless LAN Adapter as well as procedures for performing routine operations. The following topics are covered in this section:
Accessing the Latest Troubleshooting Information, page 4-2
Using the Indicator LEDs, page 4-2
Problems after Installing the Driver, page 4-3
Problems Obtaining an IP Address in Windows CE, page 4-7
Problems Associating to the Access Point, page 4-8
Problems Authenticating to the Access Point, page 4-8
Problems Connecting to the Network, page 4-8
Removing the Driver, page 4-9
Updating the Driver, page 4-18
Removing the Client Adapter, page 4-24
Uninstalling the Client Utilities and the Aironet Client Utility Setup Program, page 4-25 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-1 Accessing the Latest Troubleshooting Information Chapter 4 Troubleshooting and Routine Procedures Accessing the Latest Troubleshooting Information This chapter provides basic troubleshooting tips for your client adapter. For more up-to-date and complex troubleshooting information, refer to the TAC web site at http://www.cisco.com/tac. Select Wireless LAN under Top Issues. Using the Indicator LEDs The client adapter shows messages and error conditions through its two LEDs:
Link Integrity/Power LED (green) This LED lights when the client adapter is receiving power and blinks slowly when the adapter is linked with the network.
Link Activity LED (amber) This LED blinks quickly when the client adapter is receiving or transmitting data and blinks in a repeating pattern to indicate an error condition. Table 4-1 interprets the LED operating messages. Table 4-1 LED Operating Messages Green LED Off Amber LED Off Blinking quickly Blinking quickly Blinking slowly Blinking quickly Continuously on or blinking slowly Blinking Condition Client adapter is not receiving power or an error has occurred. Power is on, self-test is OK, and client adapter is scanning for a network. Client adapter is associated to an Access Point. Client adapter is transmitting or receiving data while associated to an Access Point. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-2 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Problems after Installing the Driver Table 4-1 LED Operating Messages (continued) Green LED Off On Off Off Amber LED Blinking quickly Blinking quickly Condition Client adapter is in power save mode. Client adapter is in ad hoc mode. On Driver installed incorrectly. Blinking in a pattern Indicates an error condition. Problems after Installing the Driver Note If you experience problems during driver installation, you may want to restart the installation process. Go to the Removing the Driver section on page 4-9 to start with a clean install. Follow the instructions in this section if you experience difficulty with your client adapter after installing the driver (for instance, your computer repeatedly freezes at the network login screen, the green LED does not blink to indicate that the adapter is active, etc.). Client Adapter Recognition Problems If your client adapter is not being recognized by your computers PCMCIA adapter, check your computers BIOS and make sure that the PC card controller mode is set to PCIC compatible. Note A computers BIOS varies depending on the manufacturer. For support on BIOS-related issues, consult your computers manufacturer. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-3 Problems after Installing the Driver Chapter 4 Troubleshooting and Routine Procedures If your computers operating system is MacOS 9.x, verify that the driver
(pcm3x0) and enablers (pcm3x0Enabler) are installed. They should be in the Extensions folder of the System folder.
If you cannot find the driver, reinstall it and restart the computer. If the driver is properly installed, eject the client adapter and reinsert it. Missing Files in Windows CE If you experience a problem after attempting to install the driver for Windows CE, some necessary files may be missing.
If you are using Windows CE 2.11, locate the mfcce211.dll, arp.dll, dhcp.dll, ndis.dll, and network.cpl files on the Windows CE Services CD that was shipped with your Windows CE device or obtain them from the device manufacturer. Then use Windows Explorer to copy these files into the
\Windows directory of the Windows CE device and reinstall the driver following the instructions in the Installing the Driver for Windows CE section on page 3-18. If you are using Windows CE 3.00, obtain the mfcce300.dll file from the device manufacturer, use Windows Explorer to copy it into the \Windows directory of the Windows CE device, and reinstall the driver following the instructions in the Installing the Driver for Windows CE section on page 3-18. Resolving Resource Conflicts If you encounter problems while installing your client adapter on a computer running a Windows operating system, you may need to specify a different interrupt request (IRQ) or I/O range for the adapter. The default IRQ for the client adapter is IRQ 10, which may not work for all systems. Follow the steps for your specific operating system to obtain an available IRQ. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-4 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Problems after Installing the Driver During installation the adapters driver installation script scans for an unused I/O range. The installation can fail if the I/O range found by the driver installation script is occupied by another device but not reported by Windows. An I/O range might not be reported if a device is physically present in the system but not enabled under Windows. Follow the steps for your specific operating system to obtain an available I/O range. Resolving Resource Conflicts in Windows 95, 98, and Me Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Double-click My Computer, Control Panel, System, the Device Manager tab, and Network Adapters. Select the Cisco Systems wireless LAN adapter. Click the Properties button. In the General screen, the Device Status field indicates if a resource problem exists. If a problem is indicated, click the Resources tab. Deselect the Use automatic settings checkbox. Under Resource Settings or Resource Type, click Input/Output Range. Look in the Conflicting Device list at the bottom of the screen. If it indicates that the range is being used by another device, click the Change Setting button. Scroll through the ranges in the Value dialog box and select one that does not conflict with another device. The Conflict Information window at the bottom of the screen indicates if the range is already being used. Step 9 Click OK. Step 10 Under Resource Settings or Resource Type, click Interrupt Request. Step 11 Step 12 Look in the Conflicting Device list at the bottom of the screen. If it indicates that the IRQ is being used by another device, click the Change Setting button. Scroll through the IRQs in the Value dialog box and select one that does not conflict with another device. The Conflict Information window at the bottom of the screen indicates if the IRQ is already being used. Step 13 Click OK. Step 14 Reboot your computer. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-5 Problems after Installing the Driver Chapter 4 Troubleshooting and Routine Procedures Resolving Resource Conflicts in Windows 2000 Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Step 11 Double-click My Computer, Control Panel, System, the Hardware tab, Device Manager, and Network Adapters. Select the Cisco Systems wireless LAN adapter. In the General screen, the Device Status field indicates if a resource problem exists. If a problem is indicated, click the Resources tab. Deselect the Use automatic settings checkbox. Under Resource Settings or Resource Type, click Input/Output Range. Look in the Conflicting Device list at the bottom of the screen. If it indicates that the range is being used by another device, click the Change Setting button. Scroll through the ranges in the Value dialog box and select one that does not conflict with another device. The Conflict Information window at the bottom of the screen indicates if the range is already being used. Click OK. Under Resource Settings or Resource Type, click Interrupt Request. Look in the Conflicting Device list at the bottom of the screen. If it indicates that the IRQ is being used by another device, click the Change Setting button. Scroll through the IRQs in the Value dialog box and select one that does not conflict with another device. The Conflict Information window at the bottom of the screen indicates if the IRQ is already being used. Step 12 Click OK. Step 13 Reboot your computer. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-6 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Problems Obtaining an IP Address in Windows CE Resolving Resource Conflicts in Windows NT Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Select Start > Programs > Administrative Tools > Windows NT Diagnostics. Click the Resources tab. Click the IRQ button. The used IRQs are listed in numerical order along the left side of the Resources window. Write down the number of an IRQ that is not being used; you will need it for Step 11. Click the I/O Port button. The used I/O ranges are listed in numerical order along the left side of the Resources window under Address. Write down an I/O range that is not being used
(for example, if range 0100-013F is followed by 0170-0177 in the list, then 0140-0169 is an available range); you will need it for Step 13. Double-click My Computer, Control Panel, and Network. Click the Adapters tab and select the Cisco Aironet wireless LAN adapter. Click Properties. Step 10 Select Interrupt under Property. Step 11 Select the number of the unused interrupt from Step 4 in the Value drop-down box. Step 12 Select IO Base Address under Property. Step 13 Select a value that is within the unused range you determined in Step 6. For example, if your unused range is 0140-0169, you could select 150. Step 14 Click OK. Problems Obtaining an IP Address in Windows CE If your computers operating system is Windows CE 2.11 or 3.00 and your network is set up to use DHCP to acquire an IP address, the DHCP lease renewal may fail, especially in suspend/resume situations. To obtain an IP address, soft reset your Windows CE device. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-7 Problems Associating to the Access Point Chapter 4 Troubleshooting and Routine Procedures Problems Associating to the Access Point Follow the instructions below if your client adapter fails to associate to the Access Point.
If possible, move your workstation a few feet closer to the Access Point and try again.
Make sure the client adapter is securely inserted in your computers PC card slot or PCI expansion slot.
If you are using a PCI client adapter, make sure the antenna is securely attached.
Make sure the Access Point is turned on and operating.
Check that all parameters are set properly for both the client adapter and the Access Point. These include the SSID, LEAP or EAP activation, WEP activation, network type, and channel.
If the client adapter still fails to establish contact, refer to the Obtaining Technical Assistance section on page xvii for technical support information. Problems Authenticating to the Access Point If your client adapter is a 40-bit card and LEAP is enabled, the adapter can associate to but not authenticate to Access Points using 128-bit encryption. To authenticate to an Access Point using 128-bit encryption, you have two options:
Purchase a 128-bit client adapter. This is the most secure option.
Disable WEP for the client adapter and configure the adapter and the Access Point to associate to mixed cells. This option presents a security risk because your data is not encrypted as it is sent over the RF network. Problems Connecting to the Network After you have installed the appropriate driver and client utilities, contact your IS department if you have a problem connecting to the network. Proxy server, network protocols, and further authentication information might be needed to connect to the network. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-8 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Removing the Driver Removing the Driver This section provides instructions for removing a client adapter driver from your computer. Two examples of when you may need to remove a driver are listed below:
If you are running Windows 95, 98, NT, or 2000 and a Cisco Aironet client adapter was previously installed on your computer with the 6.10 driver, you must remove this driver before you can install a more recent driver, such as the one provided on the Cisco Aironet Series Wireless LAN Adapters CD. If you experience difficulty while installing the driver for your computers operating system, you may want to abort the installation procedure and start over. However, before you attempt to install the driver again, you must first remove any part of the driver that you may have already installed. Table 4-2 enables you to quickly locate the instructions for removing a driver for your specific operating system. Table 4-2 Locating Driver Removal Instructions Operating System Windows 95 Windows 98 Windows NT Windows 2000 6.10 Driver page 4-10 page 4-10 page 4-11 page 4-12 Windows Millennium (Me) Not applicable Windows CE 2.11 Windows CE 3.0 Linux MacOS 9.x Not applicable Not applicable Not applicable Not applicable Driver Other Than 6.10 page 4-13 page 4-13 page 4-14 page 4-15 page 4-13 page 4-16 page 4-16 page 4-17 page 4-17 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-9 Removing the Driver Chapter 4 Troubleshooting and Routine Procedures Removing the 6.10 Driver To determine if the 6.10 driver is installed on your computer, open the Aironet Client Utility (ACU) by clicking on the ACU icon on the desktop and select Status from the Commands pull-down menu. The driver version is indicated in the NDIS Driver Version field. To uninstall the 6.10 driver, follow the instructions that apply to your computers operating system. Removing the 6.10 Driver for Windows 95 and 98 Step 1 Make sure the previous client adapter is in your computer and the computer is booted up. Step 2 Step 3 Step 4 Step 5 Right-click the WepStat icon in the system tray on your desktop. This icon looks like two connected computers. Click Terminate. Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Open Windows Explorer and find the \Utilities\RmWep directory on your computers CD-ROM drive. Step 6 Double-click the RmWep.exe file. Step 7 Minimize Windows Explorer. Step 8 Step 9 Double-click My Computer, Control Panel, and Network. In the Network window, select the Cisco Systems wireless LAN adapter. Step 10 Click Remove and OK. Step 11 When prompted to restart your computer, click No. Step 12 Maximize Windows Explorer. Step 13 Click View, Options or Folder Options, and View. Under Hidden files, make sure Show all files is selected, make sure the Hide file extensions for known file types checkbox is deselected, and click OK. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-10 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Removing the Driver Step 14 Find your computers operating system in the following table, go to the path listed, and delete the file indicated. Operating System Windows 95 Windows 98 Location of File C:\Windows\Inf C:\Windows\Inf or C:\Windows\Inf\Other File to be Deleted pc4800.inf pc4800.inf or aironetnetx500.inf Step 15 Remove the CD from your computers CD-ROM drive. Step 16 Shut down your computer. Step 17 Remove the client adapter. Step 18 Go to the Inserting the Client Adapter into a Computing Device section on page 3-2 for instructions on inserting your new client adapter and installing the latest driver. Removing the 6.10 Driver for Windows NT Step 1 Make sure the previous client adapter is in your computer and the computer is booted up. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Right-click the WepStat icon in the system tray on your desktop. This icon looks like two connected computers. Click Terminate. Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Open Windows Explorer and find the \Utilities\RmWep directory on your computers CD-ROM drive. Double-click the RmWep.exe file. Close Windows Explorer. Double-click My Computer, Control Panel, and Network. In the Network window, click the Adapters tab. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-11 Removing the Driver Chapter 4 Troubleshooting and Routine Procedures Step 10 Select the Cisco Systems wireless LAN adapter. Step 11 Click Remove. Step 12 When asked if you wish to continue, click Yes and Close. Step 13 When prompted to restart your computer, click No. Step 14 Remove the CD from your computers CD-ROM drive. Step 15 Shut down your computer. Step 16 Remove the client adapter. Step 17 Go to the Inserting the Client Adapter into a Computing Device section on page 3-2 for instructions on inserting your new client adapter and installing the latest driver. Removing the 6.10 Driver for Windows 2000 Step 1 Make sure the previous client adapter is in your computer and the computer is booted up. Right-click the WepStat icon in the system tray on your desktop. This icon looks like two connected computers. Click Terminate. Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Open Windows Explorer. Click Tools, Folder Options, and View. Under Hidden files and folders, make sure Show hidden files and folders is selected, make sure the Hide file extensions for known file types checkbox is deselected, and click OK. Find the \Utilities\RmWep directory on your computers CD-ROM drive. Double-click the RmWep.exe file. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Go to C:\Windows\Inf and double-click the oemx.inf and oemx.pnf files, where x equals a numeral, to open them. Step 11 Delete the oemx.inf and oemx.pnf files that are labeled Aironet. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-12 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Removing the Driver Step 12 Remove the CD from your computers CD-ROM drive. If you are prompted to restart your computer, click Yes. Step 13 Step 14 When the computer restarts, double-click My Computer, Control Panel, and Add/Remove Hardware. Step 15 In the Add/Remove Hardware Wizard window, click Next. Step 16 Click Uninstall/Unplug a device. Click Next. Step 17 Click Uninstall a device. Click Next. Step 18 From the Devices list, select the Cisco Systems wireless LAN adapter. Click Next. Step 19 Click Yes, I want to uninstall this device. Click Next. Step 20 Click Finish. Step 21 Shut down your computer. Step 22 Remove the client adapter. Step 23 Go to the Inserting the Client Adapter into a Computing Device section on page 3-2 for instructions on inserting your new client adapter and installing the latest driver. Removing a Driver Other Than the 6.10 Driver To uninstall a driver other than the 6.10 driver, follow the instructions that apply to your computers operating system. Removing the Driver for Windows 95, 98, and Me Step 1 Step 2 Step 3 Double-click My Computer, Control Panel, and Network. In the Network window, select the Cisco Systems wireless LAN adapter. Click Remove and OK. Step 4 When prompted to restart your computer, click No. Step 5 Open Windows Explorer. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-13 Removing the Driver Chapter 4 Troubleshooting and Routine Procedures Step 6 If your computers operating system is Windows 95 or 98, click View, Options or Folder Options, and View. Under Hidden files, make sure Show all files is selected and click OK. Step 7 Find your computers operating system in the following table, go to the path listed, and delete the file indicated. Operating System Windows 98 Windows Me Location of File C:\Windows\Inf or C:\Windows\Inf\Other C:\Windows\Inf\Other File to be Deleted pc4800.inf or aironetnetx500.inf aironetnetx500.inf Step 8 Find your computers operating system in the following table and delete the pcx500.sys file from the path indicated. Operating System Windows 95 Windows 98 Windows Me Location of pcx500.sys File C:\Windows\System\pcx500.sys C:\Windows\System\pcx500.sys C:\Windows\System32\Drivers\pcx500.sys Step 9 Restart your computer. Removing the Driver for Windows NT Step 1 Step 2 Step 3 Step 4 Double-click My Computer, Control Panel, and Network. In the Network window, click the Adapters tab. Select the Cisco Systems wireless LAN adapter. Click Remove. Step 5 When asked if you wish to continue, click Yes and Close. Step 6 When prompted to restart your computer, click Yes. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-14 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Removing the Driver Removing the Driver for Windows 2000 Step 1 Make sure the client adapter is installed in your computer. Otherwise, Windows cannot find the adapter to remove it. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Double-click My Computer, Control Panel, and Add/Remove Hardware. In the Add/Remove Hardware Wizard window, click Next. Click Uninstall/Unplug a device. Click Next. Click Uninstall a device. Click Next. From the Devices list, select the Cisco Systems wireless LAN adapter. Click Next. Click Yes, I want to uninstall this device. Click Next. Click Finish. Open Windows Explorer. Step 10 Click Tools, Folder Options, and View. Step 11 Under Hidden files and folders, make sure Show hidden files and folders is selected. Click OK. Step 12 Go to C:\Windows\Inf and double-click the oemx.inf and oemx.pnf files, where x equals a numeral, to open them. Step 13 Delete the oemx.inf and oemx.pnf files that are labeled Cisco. Step 14 Go to C:\Windows\System32\Drivers and delete the pcx500.sys file. Step 15 Shut down your computer. Step 16 Remove the client adapter. Step 17 Turn your computer back on. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-15 Removing the Driver Chapter 4 Troubleshooting and Routine Procedures Removing the Driver for Windows CE 2.11 Step 1 Step 2 Step 3 Step 4 Eject the client adapter and remove it from the Windows CE device. Select Start > Programs > Cisco > Cisco Aironet Uninstall. The Cisco Aironet Uninstall screen appears. Select the Uninstall Cisco Aironet Wireless LAN Adapter checkbox. Click OK. The utility informs you that the adapter has been uninstalled. The registry entries (but no files) are removed, and the system returns to the point at which the files have just been copied to the Windows CE device. Removing the Driver for Windows CE 3.00 Step 1 Step 2 Step 3 Step 4 Eject the client adapter and remove it from the Windows CE device. Select Start > Settings > Control Panel > Remove Programs (on a hand-held device) or Start > Settings > System tab > Remove Programs (on a pocket PC device). Select the Cisco Systems wireless LAN adapter. Click the Remove button. Step 5 When asked to verify your decision to remove the adapter, click Yes. Step 6 Click OK. The driver, client utilities, registry entries, and Cisco directory are removed. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-16 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Removing the Driver Removing the Driver for Linux Step 1 Step 2 Step 3 Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Go to the Linux directory on the CD. Type sh ./cwuninstall and press Enter. If the uninstall is successful, the driver and the client utilities are removed. If the uninstall process fails, an error message appears. Removing the Driver for MacOS 9.x Step 1 Double-click the Cisco pc3x0 icon on the desktop. The Cisco pc3x0 window appears. Step 2 Double-click the Installer icon. Step 3 When the Cisco Wireless LAN Adapter Software screen appears, click Continue. The Install window appears. In the top left corner of the Install window, click on the Easy Install pull-down menu and select Custom Remove. Select the Application, driver and help files for Power Macintosh checkbox. Click the Remove button. Step 4 Step 5 Step 6 Step 7 When a window appears indicating that the removal cannot occur with other applications running, click the Continue button. Step 8 Step 9 After you receive a message indicating that the removal was successful, click the Restart button. Remove the client adapter from the desktop by clicking on the Cisco Wireless LAN Adapter icon and dragging it to the trash can or by clicking on the Cisco Wireless LAN Adapter icon and selecting the Eject command in the Special menu. Step 10 Remove the client adapter from your PowerBooks PC card slot. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-17 Updating the Driver Chapter 4 Troubleshooting and Routine Procedures Note If the uninstall process is not successful, refer to the Read Me file on the Cisco Aironet Series Wireless LAN Adapters CD for information on manually removing the necessary files. Updating the Driver You can obtain the latest drivers at http://www.cisco.com/public/sw-center/
sw-wireless.shtml. Under Wireless Software Products - Cisco Aironet Drivers and Utilities, select your computers operating system and copy the appropriate driver to your hard drive or to a floppy disk. Use Table 4-3 to quickly locate the instructions to upgrade the driver for your specific operating system. Table 4-3 Updating the Driver Instructions Operating System Windows 95 Windows 98 Windows NT Windows 2000 Windows Millennium Edition (Me) Windows CE Linux MacOS 9.x Page Number 4-19 4-19 4-19 4-20 4-21 4-22 4-23 4-23 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-18 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Updating the Driver Upgrading the Driver for Windows 95 and 98 Step 1 Make sure your client adapter is installed in your computer. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Double-click My Computer, Control Panel, System, the Device Manager tab, and Network Adapters. Select the Cisco Systems wireless LAN adapter. Click Properties. Select the Driver tab. Click the Change Driver or Update Driver button. The Update Device Driver Wizard window appears. Click Next. Select Search for a better driver than the one your device is using now
(Recommended) and click Next. Select the location of the new driver (floppy disk drive or specify a location), deselect the other options, enter the full path to the new driver (if you selected to specify a location), and click Next. Step 10 A message appears indicating that the system is ready to install the new driver. Click Next and Finish. The driver upgrade is complete, and the old driver is overwritten by the new one. Upgrading the Driver for Windows NT Step 1 Make sure your client adapter is installed in your computer. Step 2 Step 3 Step 4 Double-click My Computer, Control Panel, Network, and Adapters. Select the Cisco Systems wireless LAN adapter. Click the Update button. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-19 Updating the Driver Chapter 4 Troubleshooting and Routine Procedures Step 5 In the Windows NT Setup window, enter the full path to the new driver (for example, you would enter A:\ if you copied the file to the root of a floppy disk) and click Continue. Step 6 Follow the instructions on the screen to complete the upgrade process. Upgrading the Driver for Windows 2000 Step 1 Make sure your client adapter is installed in your computer. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Double-click My Computer, Control Panel, System, the Hardware tab, Device Manager, and Network Adapters. Select the Cisco Systems wireless LAN adapter. Select the Driver tab. Click the Update Driver button. The Update Device Driver Wizard window appears. Click Next. Select Search for a suitable driver for my device (Recommended) and click Next. Select the location of the new driver (floppy disk drive or specify a location), deselect the other options, and click Next. Enter the full path to the new driver (if you selected to specify a location) and click OK. Step 10 A message appears indicating that the system is ready to install the new driver. Click Next and Finish. The driver upgrade is complete, and the old driver is overwritten by the new one. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-20 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Updating the Driver Upgrading the Driver for Windows Me Step 1 Make sure your client adapter is installed in your computer. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Double-click My Computer, Control Panel, System, the Device Manager tab, and Network Adapters. Select the Cisco Systems wireless LAN adapter. Click Properties. Select the Driver tab. Click the Update Driver button. The Update Device Driver Wizard window appears. Select Specify the location of the driver (Advanced) and click Next. Select Search for a better driver than the one your device is using now
(Recommended) and click Next. Select the Specify a location checkbox, deselect the other options, enter the full path to the new driver, and click Next. Step 10 A message appears indicating that the system is ready to install the new driver. Click Next and Finish. The driver upgrade is complete, and the old driver is overwritten by the new one. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-21 Updating the Driver Chapter 4 Troubleshooting and Routine Procedures Upgrading the Driver for Windows CE The instructions for upgrading the driver vary depending on the format of the new driver (*.dll versus *.cab files). Follow the instructions for the format of your new driver.
*.dll Files If your new driver has a .dll extension, follow these steps. Step 1 Step 2 Step 3 Eject the client adapter and remove it from the Windows CE device. This causes the existing driver to unload from memory. Copy the new *.dll file to the \Windows directory. Insert the client adapter. The new *.dll file is used.
*.cab Files If your new driver has a .cab extension, follow these steps. Step 1 Step 2 Step 3 Step 4 Step 5 Copy the new *.cab file to your Windows CE device. Eject the client adapter and remove it from the Windows CE device. This causes the existing driver to unload from memory. Execute the new *.cab file. A message appears indicating that the Cisco Systems wireless LAN adapter is already installed. Click the OK button to reinstall it. Insert the client adapter. The new driver *.dll file is used. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-22 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Updating the Driver Upgrading the Driver for Linux Step 1 Make sure your client adapter is installed in your computer. Step 2 Step 3 Step 4 Copy the new driver from your hard drive or floppy disk to the pcmcia_cs_3.1.21 directory. Go to the pcmcia_cs_3.1.21 directory and uncompress the new driver file by typing tar zxvf filename.tar.gz (for example, tar zxvf airo_cs.tar.gz) and pressing Enter. Type make -f filename.mk install (for example, make -f airo_cs.mk install) and press Enter. The driver upgrade is complete, and the old driver is overwritten by the new one. Upgrading the Driver for MacOS 9.x Step 1 Make sure your client adapter is installed in your computer. Step 2 Drag and drop the new driver and enablers into the System folder. Step 3 When a dialog box appears indicating that the items need to be put into the Extensions folder, click Yes. Step 4 When a dialog box appears indicating that an older version exists, click Yes to replace it. Step 5 Restart your PowerBook. The driver upgrade is complete, and the old driver is overwritten by the new one. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-23 Removing the Client Adapter Chapter 4 Troubleshooting and Routine Procedures Removing the Client Adapter Follow the instructions below whenever you need to remove the client adapter from your computer. Removing a PC Card To remove a PC card after it is successfully installed and configured (such as when your laptop is to be transported), completely shut down your computer and pull the card directly out of the PC card slot. When the PC card is reinserted and the computer is rebooted, your connection to the network should be re-established. On Macintosh computers running MacOS 9.x, you can remove the PC card while the system is running, provided the card is not being used (that is, the client utility is not running and the card is not selected in the AppleTalk and TCP/IP control panels). Removing a PCI Client Adapter Because PCI client adapters are installed inside desktop computers, which are not designed for portable use, you should have little reason to remove the adapter. However, instructions are provided below in case you ever need to remove your PCI client adapter. Step 1 Step 2 Step 3 Step 4 Step 5 Completely shut down your computer. Disconnect the client adapters antenna. Remove the computer cover. Remove the screw from the top of the CPU back panel above the PCI expansion slot that holds your client adapter. Pull up firmly on the client adapter to release it from the slot and carefully tilt the adapter to allow it to clear the opening in the CPU back panel. Step 6 Reinstall the screw on the CPU back panel and replace the computer cover. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-24 OL-0795-01 Chapter 4 Troubleshooting and Routine Procedures Uninstalling the Client Utilities and the Aironet Client Utility Setup Program Uninstalling the Client Utilities and the Aironet Client Utility Setup Program Follow the instructions below if you need to uninstall the client utilities and the Aironet Client Utility setup program on computers running Windows 95, 98, NT, 2000, or Me. Step 1 Step 2 Step 3 Close any Windows programs that are running. Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computers CD-ROM drive. Select Start > Run and enter the following path (where D is the letter of your CD-ROM drive): D:\Utilities\ACU\setup.exe. Step 4 When the Welcome screen appears, select Remove and click Next. Step 5 When asked if you want to completely remove the selected application, click Yes. Step 6 Step 7 Step 8 Step 9 If you receive a message indicating that a file was detected that may no longer be needed by any application but deleting the file may prevent other applications from running, click Yes. If you receive a message indicating that locked files were detected, click Reboot. In the Maintenance Complete screen, click Finish. If you are prompted to restart your computer, remove the CD from the computers CD-ROM drive and click Yes. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-25 Uninstalling the Client Utilities and the Aironet Client Utility Setup Program Chapter 4 Troubleshooting and Routine Procedures Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4-26 OL-0795-01 A P P E N D I X A Technical Specifications This appendix provides technical specifications for the Cisco Aironet Wireless LAN Adapters. The following topics are covered in this section:
Physical Specifications, page A-2
Radio Specifications, page A-3
Power Specifications, page A-6
Safety and Regulatory Compliance, page A-7 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide A-1 Appendix A Technical Specifications Table A-1 lists the technical specifications for the Cisco Aironet Wireless LAN Adapters. Note If a distinction is not made between series or client adapter type, the specification applies to all Cisco Aironet Wireless LAN Adapters in the 340 and 350 series. Table A-1 Technical Specifications for the Cisco Aironet Wireless LAN Adapters Physical Specifications Size PC card LM card PCI client adapter Weight 4.5 in. L x 2.1 in. W x 0.2 in. H
(11.3 cm L x 5.4 cm W x 0.5 cm H) 3.4 in. L x 2.1 in. W x 0.2 in. H
(8.6 cm L x 5.4 cm W x 0.5 cm H) 5.8 in. L x 3.2 in. W x 0.5 in. H
(14.7 cm L x 8.1 cm W x 1.3 cm H) PC card and LM card 1.3 oz (0.037 kg) PCI client adapter 4.6 oz (0.13 kg) Enclosure PC card LM card Connector Extended Type II PC card Standard Type II PC card with RF connectors PC card and LM card 68-pin PCMCIA PCI client adapter Status indicators Operating temperature 350 series client adapters 340 series client adapters PCI card edge Green and amber LEDs; see Chapter 4 22oF to 158oF (30oC to 70oC) 32oF to 158oF (0oC to 70oC) Cisco Aironet Wireless LAN Adapters Hardware Installation Guide A-2 OL-0795-01 Appendix A Technical Specifications Table A-1 Technical Specifications for the Cisco Aironet Wireless LAN Adapters (continued) Storage temperature 40oF to 185oF (40oC to 85oC) Humidity (non-operational) 95% relative humidity Altitude ESD Radio Specifications Type Power output Operational 9843 ft (3000 m) @ room temperature for 2 hours Non-operational 5,000 ft (4572 m) @ room temperature for 20 hours 15 kV (human body model) Direct Sequence Spread Spectrum IEEE 802.11b compliant 100 mW (20 dBm) 50 mW (17 dBm) 30 mW (15 dBm) 20 mW (13 dBm) - 350 series client adapters only 15 mW (12 dBm) - 340 series client adapters only 5 mW (7 dBm) 1 mW (0 dBm) Note 30 mW is the maximum power level supported by 340 series client adapters. Note Check page C-4 for limitations on radiated power (EIRP) levels in the European community and other countries. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide A-3 Appendix A Technical Specifications Table A-1 Technical Specifications for the Cisco Aironet Wireless LAN Adapters (continued) Operating frequency 2.400 to 2.497 GHz (depending on the regulatory domain in which the client adapter is used) Usable channels 2412 to 2484 MHz in 5-MHz increments Interference rejection 35 dBc adjacent channel rejection Data rates Modulation Receiver sensitivity 350 series client adapters 340 series client adapters Receiver delay spread
(multipath) 1, 2, 5.5, and 11 Mbps Binary Phase Shift Keying (BPSK) - 1 Mbps Quaternary Phase Shift Keying (QPSK) - 2 Mbps Complementary Code Keying (CCK) - 5.5 and 11 Mbps 94 dBm @ 1 Mbps 91 dBm @ 2 Mbps 89 dBm @ 5.5 Mbps 85 dBm @ 11 Mbps 90 dBm @ 1 Mbps 88 dBm @ 2 Mbps 87 dBm @ 5.5 Mbps 83 dBm @ 11 Mbps 500 ns @ 1 Mbps 400 ns @ 2 Mbps 300 ns @ 5.5 Mbps 140 ns @ 11 Mbps (350 series client adapters) 70 ns @ 11 Mbps (340 series client adapters) Cisco Aironet Wireless LAN Adapters Hardware Installation Guide A-4 OL-0795-01 Appendix A Technical Specifications Table A-1 Technical Specifications for the Cisco Aironet Wireless LAN Adapters (continued) Range 350 series client adapters Outdoor 2000 ft (609.6 m) @ 1 Mbps 1500 ft (457.2 m) @ 2 Mbps 1000 ft (304.8 m) @ 5.5 Mbps 800 ft (243.8 m) @ 11 Mbps Indoor 350 ft (106.7 m) @ 1 Mbps 250 ft (76.2 m) @ 2 Mbps 200 ft (61 m) @ 5.5 Mbps 150 ft (45.7 m) @ 11 Mbps Note The above range numbers assume the use of a snap-on antenna with the LM card. 340 series client adapters Outdoor 1500 ft (457.2 m) @ 1 Mbps 1200 ft (365.8 m) @ 2 Mbps 800 ft (243.8 m) @ 5.5 Mbps 400 ft (121.9 m) @ 11 Mbps Indoor 300 ft (91.4 m) @ 1 Mbps 225 ft (68.6 m) @ 2 Mbps 150 ft (45.7 m) @ 5.5 Mbps 100 ft (30.5 m) @ 11 Mbps Note The above range numbers assume the use of a snap-on antenna with the LM card. Antenna PC card LM card Integrated diversity antenna Two MMCX antenna connectors PCI client adapter RP-TNC connector OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide A-5 Appendix A Technical Specifications Table A-1 Technical Specifications for the Cisco Aironet Wireless LAN Adapters (continued) Power Specifications Operational voltage Receive current steady state 5.0 V 0.25 V PC card and LM card PCI client adapter Typically 250 mA Typically 350 mA Transmit current steady state 350 series PC card and LM card 350 series PCI client adapter 340 series PC card and LM card 340 series PCI client adapter Typically 450 mA @ 20 dBm Typically 550 mA @ 20 dBm Typically 350 mA @ 15 dBm Typically 450 mA @ 15 dBm Sleep mode steady state 350 series PC card and LM card 350 series PCI client adapter 340 series PC card and LM card 340 series PCI client adapter Typically 15 mA Typically 115 mA Typically 15 mA Typically 110 mA Cisco Aironet Wireless LAN Adapters Hardware Installation Guide A-6 OL-0795-01 Appendix A Technical Specifications Table A-1 Technical Specifications for the Cisco Aironet Wireless LAN Adapters (continued) Safety and Regulatory Compliance Safety Designed to meet:
UL 1950 Third Ed. CSA 22.2 No. 950-95 IEC 60950 Second Ed., including Amendments 1-4 with all deviations EN 60950 Second Ed., including Amendments 1-4 EMI and susceptibility Radio approvals RF exposure FCC Part 15.107 & 15.109 Class B ICES-003 Class B (Canada) CISPR 22 Class B AS/NZS 3548 Class B VCCI Class B EN 50082-1 FCC Part 15.247 Canada RSS-139-1, RSS-210 Japan Telec 33A Europe ETS-300-328 OET-65C RSS-102 ANSI C95.1 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide A-7 Appendix A Technical Specifications Cisco Aironet Wireless LAN Adapters Hardware Installation Guide A-8 OL-0795-01 A P P E N D I X B Translated Safety Warnings This appendix provides translations of the safety warnings that appear in this publication. The following topics are covered in this section:
Explosive Device Proximity Warning, page B-2
Warning for Laptop Users, page B-3 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide B-1 Explosive Device Proximity Warning Appendix B Translated Safety Warnings Explosive Device Proximity Warning Warning Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use. Waarschuwing Gebruik dit draadloos netwerkapparaat alleen in de buurt van onbeschermde ontstekers of in een omgeving met explosieven indien het apparaat speciaal is aangepast om aan de eisen voor een dergelijk gebruik te voldoen. Varoitus Attention Warnung l kyt johdotonta verkkolaitetta suojaamattomien rjytysnallien lheisyydess tai rjytysalueella, jos laitetta ei ole erityisesti muunnettu sopivaksi sellaiseen kyttn.oen. Ne jamais utiliser un quipement de rseau sans fil proximit d'un dtonateur non blind ou dans un lieu prsentant des risques d'explosion, sauf si l'quipement a t modifi cet effet. Benutzen Sie Ihr drahtloses Netzwerkgert nicht in der Nhe ungeschtzter Sprengkapseln oder anderer explosiver Stoffe, es sei denn, Ihr Gert wurde eigens fr diesen Gebrauch modifiziert und bestimmt. Avvertenza Non utilizzare la periferica di rete senza fili in prossimit di un detonatore non protetto o di esplosivi a meno che la periferica non sia stata modificata a tale proposito. Advarsel Aviso Ikke bruk den trdlse nettverksenheten nrt inntil uisolerte fenghetter eller i et eksplosivt milj med mindre enheten er modifisert slik at den tler slik bruk. No opere o dispositivo de rede sem fios perto de cpsulas explosivas no protegidas ou num ambiente explosivo, a no ser que o dispositivo tenha sido modificado para se qualificar especialmente para essa utilizao. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide B-2 OL-0795-01 Appendix B Translated Safety Warnings Warning for Laptop Users Advertencia!
No utilizar un aparato de la red sin cable cerca de un detonador que no est protegido ni tampoco en un entorno explosivo a menos que el aparato haya sido modificado con ese fin. Varning!
Anvnd inte den trdlsa ntverksenheten i nrheten av oskyddade tndhattar eller i en explosiv milj om inte enheten modifierats fr att kunna anvndas i sdana sammanhang. Warning for Laptop Users Warning In order to comply with RF exposure limits established in the ANSI C95.1 standards, it is recommended when using a laptop with a PC card client adapter that the adapters integrated antenna is positioned more than 2 inches (5 cm) from your body or nearby persons during extended periods of transmitting or operating time. If the antenna is positioned less than 2 inches (5 cm) from the user, it is recommended that the user limit exposure time. Waarschuwing In het kader van een in de ANSI C95.1 norm vastgelegde limiet voor blootstelling aan straling veroorzaakt door radiofrequenties, dient u bij langdurig gebruik van een laptop met client adapter pc-kaart een afstand van meer dan 5 centimeter aan te houden tussen de gentegreerde antenne van de adapter en uzelf en enige andere personen. Als deze afstand niet kan worden aangehouden, dient u de tijd dat het apparaat gebruikt wordt te beperken. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide B-3 Warning for Laptop Users Appendix B Translated Safety Warnings Varoitus Attention Warnung Avvertenza ANSI C95.1 -standardin radiotaajuuksille asettamien altistumisrajojen mukaisesti on suositeltavaa, ett kytettess kannettavaa tietokonetta, jossa on PC-kortti-asiakas-adapteri, adapterin integroitu antenni on knnetty yli viisi cm pois vartalosta tai lhell olevista henkilist pitkaikaistenlhetys-
tai kyttjaksojen aikana. Jos antenni on knnetty alle viisi 5 cm kyttjst, on suositeltavaa, ett kyttj rajoittaa altistumisaikaa. Afin de respecter les limitations en matire dexposition aux frquences radiolectriques dfinies par les normes ANSI C95.1, il est recommand aux utilisateurs dordinateurs portables dots dadaptateurs client pour carte PC ou aux personnes se trouvant proximit de se placer plus de 5 cm de lantenne de ladaptateur lors de longues priodes de transmission ou de fonctionnement. Si lutilisateur se trouve moins de 5 cm de lantenne, il est prfrable de limiter le temps dexposition. In bereinstimmung mit den in den Sicherheitsstandards ANSI C95.1 verzeichneten Hchstwerten fr den Kontakt mit Radiofrequenz (RF) wird fr die Benutzung eines Laptops mit PC-Adapterkarten fr Clients empfohlen, bei lngerer Inbetriebnahme oder Datenbertragung die integrierte Antenne des Adapters mindestens 5 cm vom Benutzer und anderen sich in der Nhe aufhaltenden Personen entfernt aufzustellen. Befindet sich die Antenne weniger als 5 cm vom Benutzer entfernt, sollte die Benutzungsdauer des Gerts eingeschrnkt werden. In conformit con i limiti sullesposizione a frequenze radio stabiliti nelle direttive ANSI C95.1, quando si utilizza un computer portatile con una scheda PC dotata di adattatore client consigliabile mantenere lantenna integrata delladattatore a pi di 5 cm di distanza durante periodi di esposizione prolungati. Se lantenna posizionata a meno di 5 cm di distanza dallutente, consigliabile limitare i tempi di esposizione alle frequenze. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide B-4 OL-0795-01 Appendix B Translated Safety Warnings Warning for Laptop Users Advarsel Aviso Advertencia!
Du m overholde begrensningene for RF-eksponering som er fastsatt i ANSI C95.1-standardene. Derfor anbefaler vi, nr du bruker en brbar PC med et klientkort i PC-format, at kortets innebygde antenne plasseres mer enn 5 cm fra deg eller personer i nrheten under lengre perioder med overfring eller bruk. Hvis antennen er plassert mindre enn 5 cm fra brukeren, anbefaler vi at brukeren begrenser eksponeringstiden. Para estar em conformidade com os limites de exposio RF estabelecidos nas normas ANSI C95.1 recomenda-se que, aquando da utilizao de um laptop com um adaptador de cliente PC card, a antena integrada do adaptador esteja posicionada a mais de 5 cm do seu corpo ou de pessoas na vizinhana durante longos perodos de tempo de transmisso ou operao. Se a antena estiver posicionada a menos de 5 cm do utilizador, recomenda-se que o utilizador limite o tempo de exposio. Para cumplir los lmites de exposicin a radiofrecuencia (RF) que se establecen en la norma ANSI C95.1, al utilizar un equipo porttil con un adaptador cliente de tarjeta PC, site la antena del adaptador al menos a 2 pulgadas(5 cm) del usuario o de las personas adyacentes durante periodos largos de transmisin o funcionamiento. Si la distancia es inferior a 2 pulgadas (5 cm), se recomienda limitar el tiempo de exposicin. Varning!
Fr att flja de regler fr radiosndare som utfrdats enligt ANSI-standarden C95.1, rekommenderar vi att PC Card-adapterns inbyggda antenn befinner sig minst 5 cm frn dig sjlv och andra personer nr du anvnder en brbar dator med PC Card-adapter under en lngre tid. Om antennen befinner sig mindre n 5 cm frn anvndaren, rekommenderar vi inte anvndning under lngre tid. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide B-5 Warning for Laptop Users Appendix B Translated Safety Warnings Cisco Aironet Wireless LAN Adapters Hardware Installation Guide B-6 OL-0795-01 A P P E N D I X C Declarations of Conformity and Regulatory Information This appendix provides declarations of conformity and regulatory information for the Cisco Aironet Wireless LAN Adapters. The following topics are covered in this section:
Manufacturers Federal Communication Commission Declaration of Conformity Statement, page C-2
Department of Communications Canada, page C-3
European Community, Switzerland, Norway, Iceland, and Liechtenstein, page C-4
Declaration of Conformity for RF Exposure, page C-6
Guidelines for Operating Cisco Aironet Wireless LAN Adapters in Japan, page C-7 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide C-1 Manufacturers Federal Communication Commission Declaration of Conformity Statement Appendix C Declarations of Conformity and Regulatory Information Manufacturers Federal Communication Commission Declaration of Conformity Statement Models: AIR-PCM341, AIR-PCM342, AIR-LMC341, AIR-LMC342, AIR-PCI341, AIR-PCI342, AIR-PCM351, AIR-PCM352, AIR-LMC351, AIR-LMC352, AIR-PCI351, AIR-PCI352 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Certification Number:
LDK102038 (AIR-PCM34x), LDK102035 (AIR-LMC34x and AIR-PCI34x) LDK102040 (AIR-xxx35x) Manufacturer:
Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA This device complies with Part 15 rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference. However, there is no guarantee that interference will not occur. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase separation between the equipment and receiver. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide C-2 OL-0795-01 Appendix C Declarations of Conformity and Regulatory Information Department of Communications Canada
Connect the equipment to an outlet on a circuit different from which the receiver is connected.
Consult the dealer or an experienced radio/TV technician. Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Cisco could void the users authority to operate this device. Department of Communications Canada Canadian Compliance Statement This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. This device complies with Class B Limits of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The device is certified to the requirements of RSS-139-1 and RSS-210 for 2.4-GHz spread spectrum devices. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. For further information, contact your local Industry Canada office. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide C-3 European Community, Switzerland, Norway, Iceland, and Liechtenstein Appendix C Declarations of Conformity and Regulatory Information European Community, Switzerland, Norway, Iceland, and Liechtenstein Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC Cisco Aironet Wireless LAN Adapters Hardware Installation Guide C-4 OL-0795-01 Appendix C Declarations of Conformity and Regulatory Information European Community, Switzerland, Norway, Iceland, and Liechtenstein The Declaration of Conformity related to this product can be found at the following URL: http://www.ciscofax.com. For the 340 series, the following standards were applied:
Radio: ETS 300.328
EMC: ETS 300.826
Safety: EN 60950 The following CE mark is affixed to the 340 series equipment:
5 2 3 9 4 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide C-5 Declaration of Conformity for RF Exposure Appendix C Declarations of Conformity and Regulatory Information For the 350 series, the following standards were applied:
Radio: EN 300.328-1, EN 300.328-2
EMC: EN 301 489-1, EN 301 489-17
Safety: EN 60950 The following CE mark is affixed to the 350 series equipment:
The above CE mark is required as of April 8, 2000 but might change in the future. Note Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate Compliance. Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent isotropic radiated power
(EIRP) are considered as not compliant with the above mentioned directive and are not allowed for use within the European community and countries that have adopted the European R&TTE directive 1999/5/EC and/or the CEPT recommendation Rec 70.03. For more details on legal combinations of power levels and antennas, contact Cisco Corporate Compliance. Declaration of Conformity for RF Exposure The radio module has been evaluated under FCC Bulletin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide C-6 OL-0795-01 Appendix C Declarations of Conformity and Regulatory Information Guidelines for Operating Cisco Aironet Wireless LAN Adapters in Japan Guidelines for Operating Cisco Aironet Wireless LAN Adapters in Japan This section provides guidelines for avoiding interference when operating Cisco Aironet Wireless LAN Adapters in Japan. These guidelines are provided in both Japanese and English. Japanese Translation 03-5219-6000 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 8 6 7 3 4 C-7 Guidelines for Operating Cisco Aironet Wireless LAN Adapters in Japan Appendix C Declarations of Conformity and Regulatory Information English Translation This equipment operates in the same frequency bandwidth as industrial, scientific, and medical devices such as microwave ovens and mobile object identification
(RF-ID) systems (licensed premises radio stations and unlicensed specified low-power radio stations) used in factory production lines. 1. Before using this equipment, make sure that no premises radio stations or specified low-power radio stations of RF-ID are used in the vicinity. 2. 3. If this equipment causes RF interference to a premises radio station of RF-ID, promptly change the frequency or stop using the device; contact the number below and ask for recommendations on avoiding radio interference, such as setting partitions. If this equipment causes RF interference to a specified low-power radio station of RF-ID, contact the number below. Contact Number: 03-5219-6000 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide C-8 OL-0795-01 G L O S S A R Y 802.11 802.11b A Access Point The IEEE standard that specifies carrier sense media access control and physical layer specifications for 1- and 2-megabit-per-second (Mbps) wireless LANs. The IEEE standard that specifies carrier sense media access control and physical layer specifications for 5.5- and 11-Mbps wireless LANs. A wireless LAN data transceiver that uses radio waves to connect a wired network with wireless stations. Ad Hoc Network A wireless network composed of stations without Access Points. Associated A station is configured properly to allow it to wirelessly communicate with an Access Point. B BOOTP BPSK Boot Protocol. A protocol used for the static assignment of IP addresses to devices on the network. A modulation technique used by IEEE 802.11-compliant wireless LANs for transmission at 1 Mbps. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1 Glossary C CCK Client CSMA D Data Rates dBi DHCP Dipole DSSS Complementary code keying. A modulation technique used by IEEE 802.11-compliant wireless LANs for transmission at 5.5 and 11 Mbps. A radio device that uses the services of an Access Point to communicate wirelessly with other devices on a local area network. Carrier sense multiple access. A wireless LAN media access method specified by the IEEE 802.11 specification. The range of data transmission rates supported by a device. Data rates are measured in megabits per second (Mbps). A ratio of decibels to an isotropic antenna that is commonly used to measure antenna gain. The greater the dBi value, the higher the gain, and the more acute the angle of coverage. Dynamic host configuration protocol. A protocol available with many operating systems that automatically issues IP addresses within a specified range to devices on the network. The device retains the assigned address for a specific administrator-defined period. A type of low-gain (2.2-dBi) antenna consisting of two (often internal) elements. Direct sequence spread spectrum. A type of spread spectrum radio transmission that spreads its signal continuously over a wide frequency band. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 2 OL-0795-01 Glossary Extensible Authentication Protocol. An optional IEEE 802.1x security feature ideal for organizations with a large user base and access to an EAP-enabled Remote Authentication Dial-In User Service (RADIUS) server. The most widely used wired local area network. Ethernet uses carrier sense multiple access (CSMA) to allow computers to share a network and operates at 10, 100, or 1000 Mbps, depending on the physical layer used. A repository for files so that a local area network can share files, mail, and programs. E EAP Ethernet F File Server G Gateway A device that connects two otherwise incompatible networks together. GHz I IEEE Gigahertz. One billion cycles per second. A unit of measure for frequency. Institute of Electrical and Electronic Engineers. A professional society serving electrical engineers through its publications, conferences, and standards development activities. The body responsible for the Ethernet 802.3 and wireless LAN 802.11 specifications. Infrastructure The wired Ethernet network. IP Address The Internet Protocol (IP) address of a station. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3 Glossary IP Subnet Mask The number used to identify the IP subnetwork, indicating whether the IP address can be recognized on the LAN or if it must be reached through a gateway. Isotropic An antenna that radiates its signal 360 degrees both vertically and horizontally in a perfect sphere. M Modulation Any of several techniques for combining user information with a transmitters carrier signal. Multipath The echoes created as a radio signal bounces off of physical objects. P Packet Q Quadruple Phase Shift Keying R Range A basic message unit for communication across a network. A packet usually includes routing information, data, and sometimes error detection information. A modulation technique used by IEEE 802.11-compliant wireless LANs for transmission at 2 Mbps. A linear measure of the distance that a transmitter can send a signal. Receiver Sensitivity A measurement of the weakest signal a receiver can receive and still correctly translate it into data. Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4 OL-0795-01 Glossary RF Roaming RP-TNC Radio frequency. A generic term for radio-based technology. A feature of some Access Points that allows users to move through a facility while maintaining an unbroken connection to the LAN. A connector type unique to Cisco Aironet radios and antennas. Part 15.203 of the FCC rules covering spread spectrum devices limits the types of antennas that may be used with transmission equipment. In compliance with this rule, Cisco Aironet, like all other wireless LAN providers, equips its radios and antennas with a unique connector to prevent attachment of non-approved antennas to radios. S Spread Spectrum SSID T A radio transmission technology that spreads the user information over a much wider bandwidth than otherwise required in order to gain benefits such as improved interference tolerance and unlicensed operation. Service Set Identifier. A unique identifier that stations must use to be able to communicate with an Access Point. The SSID can be any alphanumeric entry up to a maximum of 32 characters. Transmit Power The power level of radio transmission. W WEP Wired Equivalent Privacy. An optional security mechanism defined within the 802.11 standard designed to make the link integrity of wireless devices equal to that of a cable. Workstation A computing device with an installed client adapter. OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 5 Glossary Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 6 OL-0795-01 Numerics 6.10 driver determining if installed 4-10 removing 3-2, 4-10 to 4-13 A Access Points in wireless infrastructure 1-9 positioning 1-10 to 1-11 problems associating to 4-8 role in wireless network 1-7 ad hoc wireless LAN 1-8 Aironet Client Utility (ACU), described 3-30 Aironet Client Utility setup program described 1-6 uninstalling 4-25 antennas placement 1-10 safety guidelines 2-3 specifications A-5 used with client adapters 1-4 I N D E X authentication described 1-6 to 1-7 verifying 3-34 C Canadian compliance statement C-3 Card and Socket Services 2-5, 3-24 to 3-25 caution, defined xiii Cisco Connection Online (CCO) xvii to xviii Client Encryption Manager (CEM), described 3-30 client utilities icons 3-32 installing 3-30 to 3-33 location on CCO 3-30 uninstalling 4-25 using with Windows NT or 2000 3-32 conventions, document xiii to xv D data rates 1-10, A-4 dipole antenna 1-4 diversity antenna 1-4 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 1 Index documentation CD-ROM xvi feedback xix obtaining xvi to xvii driver installation overview 3-6 installing 3-6 to 3-29 location on CCO 3-6, 4-18 problems after installation 4-3 to 4-7 removing 4-9 to 4-17 updating 4-18 to 4-23 verifying installation 3-33 to 3-34 E EAP described 1-6 to 1-7 enabling 3-30 to 3-33 F FCC declaration of conformity statement C-2 to C-3 safety compliance statement 2-2 H host devices 1-2, 2-5 I I/O range 4-4 interference 2-6, C-7 to C-8 interrupt request (IRQ) 4-4 L LEAP described 1-6 to 1-7 enabling 1-6, 3-30 to 3-33 LEDs 1-5, 4-2 to 4-3 Link Activity LED 4-2 Link Integrity/Power LED 4-2 Link Status Meter (LSM), described 3-30 link test 1-11 Linux determining kernel version 3-24 installing driver 3-24 to 3-26 removing driver 4-17 updating driver 4-23 LM card client adapter antenna 1-4 description 1-2 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 2 OL-0795-01 M MacOS 9.x driver installing 3-27 to 3-29 removing 4-17 microcellular network 1-9 N network configurations problems connecting to 4-8 1-7 to 1-9 note, defined xiii O overview 1-2 P package contents 2-4 1-3 parts PC card client adapter antenna 1-4 description 1-2 inserting into computing device 3-2 to 3-4 removing 4-24 Index PCI client adapter antenna 1-4 description 1-2 inserting into computing device 3-4 to 3-5 removing 4-24 peer-to-peer wireless LAN 1-8 power specifications A-6 R radio description 1-3 specifications A-3 to A-5 RADIUS servers 1-6, 1-7 recognition problems regulatory 4-3 compliance specifications A-7 information C-1 to C-8 related publications xvi resource conflicts resolving in Windows 2000 4-6 resolving in Windows 95, 98, and Me 4-4 to 4-5 resolving in Windows NT 4-7 RF exposure declaration of conformity statement C-6 RF obstructions 1-11, 2-6 roaming 1-9 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 3 Index S safety information 2-2 to 2-3 specifications A-7 seamless roaming 1-9 security features 1-5 to 1-7 sensitivity 1-10, A-4 2-6 site requirements site survey 1-10 to 1-11 specifications A-2 to A-7 spread spectrum 1-3 system requirements 2-5 T technical assistance, obtaining xvii to xix Technical Assistance Center (TAC) xviii technical specifications A-2 to A-7 troubleshooting information location on CCO 4-2 procedures 4-2 to 4-8 U unpacking the client adapter 2-4 W warnings xiii to xv, 2-3, B-2 to B-5 WEP keys 1-5 WepStat icon 3-33 Windows 2000 installing driver 3-14 to 3-15 removing 6.10 driver 4-12 to 4-13 removing driver other than 6.10 4-15 updating driver 4-20 Windows 95 determining version 3-7 installing driver 3-7 to 3-11 removing 6.10 driver 4-10 to 4-11 removing driver other than 6.10 4-13 to 4-14 updating driver 4-19 Windows 98 installing driver 3-11 to 3-12 removing 6.10 driver 4-10 to 4-11 removing driver other than 6.10 4-13 to 4-14 updating driver 4-19 Windows CE determining version and processor type 3-18 installing driver 3-18 to 3-23 removing driver 4-16 updating driver 4-22 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 4 OL-0795-01 Index Windows Me installing driver 3-16 to 3-17 removing driver other than 6.10 4-13 to 4-14 updating driver 4-21 Windows NT installing driver removing 6.10 driver 3-13 to 3-14 4-11 to 4-12 removing driver other than 6.10 4-14 updating driver 4-19 wireless infrastructure 1-9 workstations defined 1-3 in wireless infrastructure 1-9 positioning 1-10 to 1-11 OL-0795-01 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 5 Index Cisco Aironet Wireless LAN Adapters Hardware Installation Guide 6 OL-0795-01
| 1 2 3 4 5 6 7 8 | Quick Ref Guide | Users Manual | 76.99 KiB | December 06 2001 |
TeamPad 500 Controls and Switches Touch panel display Power switch PCMCIA slot Reset switch IrDA 1.1 I/F CIU charger connections Compact flash slot Function keys Sub Battery cover Main Battery cover AC adapter I/F RS232C I/F Operator Controls Power Switch Press the power [PWR] key to turn the power on. Hold the switch down until green light (located below keypad) turns on. To turn it off, press the [PWR] key. LCD Contrast To adjust the LCD contrast, press the following keys until the desired contrast is attained:
[SFT] + [F3] key: increases the contrast.
[SFT] + [F4] key: decreases the contrast. Backlight Press the [SFT] + [F2] key to turn the LCD backlight on. Press the [SFT] + [F2] key again to turn off. Only use the backlight if needed, prolonged use of the backlight decreases battery life and causes the main battery to require recharging more often. Other Common Functions Press [SFT] + [F5] key to bring up popup alpha keyboard. Press [SFT] + [SYS] key for battery status, re-calibrate touch screen, speaker volume. Integrated Printer Option Press [SFT] + [F1] key for paper feed. Replacing the Main Battery Replace the battery when its performance cycle begins to degrade substantially (approximately 500 charge cycles). 1. Power off the handheld. 2.Turn over the handheld. 3. Pull the hand strap down to release its clip from the lower cover claw. 4. Make sure the backup battery has a sufficient charge to hold the contents of RAM. 5. Release the left side lock of the battery cover. 6. While sliding the right side lock of the battery cover, lift the battery cover. 7. Slide the battery to the right (opposite to the mark on the battery). 8. Load a new battery, close the cover, close the left battery lock and place the hand strap in the original position. Charging the Battery As the battery begins to run low on power, the message Low Main Battery will appear on the screen, indicating that the battery needs recharging. The best way to charge both the main and backup batteries is while they are in the unit via an AC adapter, CIU, or vehicle support carrier. The external battery pack charger can also be used to charge the main battery. RS-232C Interface The TeamPad 500 has an RS-232C connector, through which data can be directed to a host computer. This transmission requires the use of an RS-232C cable. PCMCIA Cards (Option) PCMCIA-compatible Type II cards can be inserted in the handhelds. To insert and remove PCMCIA cards, follow these steps:
1.Slide the locks of the card cover in the direction of the arrow marks. 2.Turn back the cover, and insert the card in the card slot, the side marked with the arrow mark (D ) facing up. Push the card into position gently until its end is even with the corresponding EJECT button. 3.When removing a card, open the card cover and then press the EJECT button. 4.When the card comes out of the front, gently finish pulling it out by hand. Compact Flash Cards (Option) Compact flash cards can be inserted in the handhelds. To insert and remove cards, follow these steps:
1. Remove protective covering from right hand side of handheld. 2. Insert the card into the card slot and gently push card into position until it is securely attached. 3. Replace protective cover. 4. To remove card, take off protective cover. Note: if flashcard is going to be removed often, it is recommended that sticky tabs be applied to the card. Printer (Option) To change printer paper, follow these steps:
1. Slide side locks up; these are located on either side of cover. 2. Open printer paper cover- use forefinger and thumb placed on three ridges located below locks and firmly tug. Dos Do keep dirt away from connectors. Ensure that the rubber connector covers are in place. Do store the unit and replacement batteries in an area free from dust, moisture, and vibration. Do allow about 6 hours for charging a main battery. More time is needed if the TeamPad 500 is in use during charging. Do charge a main battery before use if it has been in storage for a long time. Do dispose of expended lithium ion main batteries (when they can no longer be recharged) according to local regulations. Do ensure that the charge connections on the unit are clean or the unit may not recharge adequately. Do calibrate the display whenever you change the RAM disk size. Do see the TeamPad 500 Systems Users Guide for instructions on calibrating the touch panel. Donts Dont use the backlight unless you need it. Using the backlight drains the battery more quickly. Dont press the reset switch unless necessary. The reset switch clears all memory and reboots the unit. 3. Drop paper in so that paper is fed up through bottom and pull down. 4. Close cover and slide side locks down. Cleaning Covers Use a wet cloth with alcohol (ethyl alcohol) or a light cleaning solution that is squeezed tightly, or just use a dry cloth. Display Use a wet cloth with alcohol (ethyl alcohol) or dipped in water which is squeezed tightly, or a dry cloth that has a fine weave texture. Troubleshooting Symptom Diagnostic Procedure Corrective Action Power does not come on. 1. Adjust contrast. Is problem solved?
2. Is the battery cover closed and left switch locked?
3. Has the battery been charged? Does the battery have adequate charge?
4. Remove the main and backup batteries and reinstall them. Does the power come on?
No: Go to step 2. Yes: Go to step 3. No: Close the battery cover. Yes: Go to step 3. No: Recharge the battery. Yes: Problem corrected. No: Probable hardware error on main circuit board. Symptom Diagnostic Procedure Corrective Action When the power key is pressed, the LCD comes on for an instant and then goes off. 1. Replace or recharge the main battery, and press the power key again? Does the unit come on normally?
2. Is the main battery voltage low?
3. Remove the main and backup batteries and reinstall them. Does power come on?
Yes: Problem corrected. No: Replace or recharge the main battery. Yes: Replace or recharge the main battery. No: Go to step 3. Yes: Problem corrected. No: Probable hardware error on main circuit board. TeamPad 500 Quick Reference Guide DCC 90000453 Thank you for purchasing the TeamPad 500. This guide shows the major operator controls and their use, provides information on charging and replacing the main battery, lists some basic troubleshooting information, and offers procedures to be followed and actions to be avoided. We recommend that you keep this guide with the TeamPad 500. Following the instructions in this guide can ensure that the TeamPad 500 performs reliably. Fujitsu Transaction Solutions Inc. Mobile Solutions Group 11085 North Torrey Pines Road La Jolla, CA 92037 800-228-8683 www.fujitsuhandheld.com
| 1 2 3 4 5 6 7 8 | Quick Ref Guide Additions | Users Manual | 8.34 KiB | December 06 2001 |
Regulatory Document TeamPad 500 Quick Reference Guide Regulatory Additions ISSUE: 1.0 Page 1 of 1 The following additional items will be added to the TeamPad 500 Quick Reference guide at time of release. 1. FCC RF Exposure Guidelines:
WARNING: FCC Exposure Guidelines To satisfy FCC RF exposure compliance requirements for a portable transmitting device, this device should be used in hand-held, hand-operated configurations only. The device and its antenna should generally maintain a separation distance of 20 cm or more from a persons body; except for the hands and wrists because of higher exposure limits for extremities. This device is designed to be used in a persons hands and its operating configurations, generally do not support normal transmissions while it is carried in pockets or holsters next to a persons body. 2. RF Devices Caution Statement / Present Certification Information This device has been properly certified to be used with the the following RF card(s):
1. Cisco {Part:AIR-LMC352}, {FCC ID: LDK102040}, {Canada: 246 1103 2079A}. Any changes or modifications to Fujitsus equipment not expressly approved by Fujitsu could void the users authority to operate the equipment per FCC regulations. 3. Installation / Servicing Procedures Only authorized Fujitsu integrators are permitted to install and service the RF devices within this unit.
| 1 2 3 4 5 6 7 8 | Revised Manual | Users Manual | 1.31 MiB | October 08 2001 |
TeamPad 7500 Series Operations Guide (PBT7500-16, PBT7510-16 & PBT7510-18) Fujitsu-ICL Systems Inc. Mobile Solutions 11085 N. Torrey Pines Rd. La Jolla, CA 92037 Tel: 1-800-228-8683 Fax: 858-457-2701 handheldproducts@fjicl..com www.fjicl.com Fujitsu Mobile Solutions Providing Lightweight, Rugged Solutions for Mobile Evironments i 90000079 Version 3.0 Regulatory Document TeamPad 7510 Quick Reference Guide Regulatory Additions ISSUE: 1.1 Page 1 of 1 The following additional items will be added to the TeamPad 7510 Quick Reference guide at time of release. 1. FCC RF Exposure Guidelines:
WARNING: FCC Exposure Guidelines To satisfy FCC RF exposure compliance requirements for a mobile transmitting device, this device should be used in hand-held, hand-operated configurations only. The device and its antenna should generally maintain a separation distance of 20 cm or more from a persons body. This device is designed to be used in a persons hands and its operating configurations, generally do not support normal transmissions while it is carried in pockets or holsters next to a persons body. 2. RF Devices Caution Statement / Present Certification Information This device has been properly certified to be used with the the following RF card(s):
1. Cisco {Part:AIR-LMC352}, {FCC ID: LDK102040}, {Canada: 246 1103 2079A}. Any changes or modifications to Fujitsus equipment not expressly approved by Fujitsu could void the users authority to operate the equipment per FCC regulations. 3. Installation / Servicing Procedures Only authorized Fujitsu integrators are permitted to install and service the RF devices within this unit. 4. Operating Distance This device shall be used at a distance of more than 20cm or approximately 8 away from the body to allow for the best viewing angle for reading the display and also operating the device. Version 3.0 April 2001 Copyright Fujitsu Limited and Fujitsu-ICL Systems, Inc. All Rights Reserved TeamPad is a trademark of Fujitsu Ltd. MS-DOS, Windows NT, Windows 2000 and Microsoft are the registered trademarks of Microsoft Corporation. Additionally, the company names and product names described in this manual are the trademarks of those respective companies. The contents of this manual may be revised without prior notice. Specifications are subject to change without notice. Revision Record Edition Date Issued Description of Change V. 2.0 February 2000 Initial Release V. 3.0 June 2001 Integration and Release of TP7510 Page (s) All All FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ii To Use This Product Safely This manual contains important information required for the safe use of the TeamPad 7500 series products. Read this manual thoroughly, paying particular attention to the Notes on Safety, before attempting to operate these devices. It is strongly advised that users keep this manual in a safe and convenient location so that it can be referenced should any questions or problems arise. FUJITSU makes every effort to prevent users and observers from being injured and to prevent property from suffering damage. To ensure no harm to you, observers, or the equipment itself, be sure to use the product according to the instructions in this manual. iii Preface Thank you very much for purchasing our TeamPad 7500 series thin client device (PBT7500-16, PBT7510-16 or PBT7510-18). Carefully read this manual for the proper procedures to correctly use these devices. This manual also provides instructions on how to make the best use of all the available functions. Microsoft, Windows 2000 and Windows NT are the registered trademarks of Microsoft Corporation in USA and other countries. Additionally, the company names and product names described in this manual are the trademarks of companies. TeamPad 7500 Models and Features The TeamPad 7500 Series includes three thin client devices (models):
PBT7500-16: TeamPad 7500 Thin Client Handheld with Windows CE WBT preloaded, MMCX antenna, integrated 10 Key keypad, 8.4 inch (diagonal) DSTN LCD panel. PBT7510-16: TeamPad 7510 Thin Client Handheld with Windows CE WBT preloaded, MMCX antenna, integrated 10 Key keypad, 10.4 inch (diagonal) TFT LCD panel. PBT7510-18: TeamPad 7510 Thin Client Handheld with Windows CE WBT preloaded, Lucent antenna, integrated 10 Key keypad, 10.4 inch (diagonal) TFT LCD panel. The TeamPad 7500 Charger Stand PBT7531-01: Charger Stand, with AC adapter and power cord (US version) PBT7531-11: Charger Stand with Daisy Chain cable The TeamPad 7500 Dual Battery Pack Charger PBT7531-03: Dual Battery Pack Charger, with power cord (US version) PBT7531-05: 1750 mAh Battery Pack (Spare) TeamPad 7500 Server Software PBT7561-10: Com LAN Transporter for 2000 V01L10, 25 user license (provides access to TeamPad 7500 serial ports from applications running on a Windows NT 2000 Server through the wireless LAN). iv Alert Messages This manual uses the following alert messages. An alert message consists of an alert signal and a message. An alert signal consists of a symbol and a word or just a word. The following are the alert signals and their meanings:
Alert Symbols Indicates a hazardous situation. A personal injury could result if the user does not perform the correct procedures. Indicates a hazardous situation. A minor or moderate personal injury could result if the user does not perform the correct procedures. Also, caution indicates that damage to the product or other property may occur if the user does not perform the correct procedures. This manual uses easy to identify alert symbols. The aim is to help users identify warnings at first glance. The alert symbols are shown below with notes on safety. The following are the alert symbols and their meanings:
Electrical shock Prohibited Caution Notes on Safety Handling this device Indicates that improper usage may cause an electrical shock. Indicates prohibited action. Indicates caution required. v Electrical shock Prohibited Observe the following to avoid an electrical shock or fire:
Do not damage the power cord of any of the chargers in use (e.g., the charger of the main equipment). Do not use an outlet with a loose insertion port. Do not connect or disconnect the charger when your hands are wet. Do not connect an excess number of power cords to a single outlet. Use only the designated chargers and expansion stations. Otherwise, an unapproved rating of voltage or current may damage the device. Do not disassemble or alter the device. Doing so may cause a device failure, electrical shock, fire, or other defects. To avoid a device failure, do not leave the device in the following places for even a short period of time:
1. A place where the temperature may sharply rise (e.g., in a car with the windows closed on a sunny day) 2. A place where the device may be exposed to direct sunlight 3. A place where the temperature is too hot or cold 4. A dusty or dirty place 5. A place where the device may vibrate 6. A wet or humid place Do not insert anything metallic or flammable into the openings of the device (e.g., slots). Doing so may cause a device failure, electrical shock, fire, or other such defects. Always keep the power supply of the charger and the insertion port of the outlet clean. If they are dusty, clean with a dry cloth. Failure to keep the charger and the outlet clean may cause a fire. Do not use the device when electrical storms (especially storms accompanied by thunder and lightning) occur in the vicinity. In such a case, turn off the power to the device immediately and disconnect the charger from the outlet. Lightning will cause damage to the device, and a fire may also result. If any heat, smoke, odor, or any abnormal sound emits from the device, immediately turn the power off. Then disconnect the charger and remove the battery. Using the device when any of these conditions occur, may cause an electrical shock or fire. vi Caution The handheld device is precision equipment containing a liquid crystal display (LCD). Do not apply strong force, shock, or drop the device. Doing so may damage or destroy the LCD. When not planning to use the device for a long time, disconnect the charger. Disconnect the charger from the outlet and the device. Failure to do so may cause an electrical shock or fire. Completely charge the battery before disconnecting it from the outlet. Use only the charger specified in the manual. Do not disassemble or alter the charger. Doing so may cause a device failure, fire, or injury. Do not cover or wrap the device and charger with a cloth when in use. Doing so raises the internal temperature and may result in a fire. Battery pack (Lithium-ion battery pack) Use only the designated charger to charge the battery pack. Do not connect the positive and negative terminals of the battery pack to anything metallic (e.g., a chain necklace). Do not heat the battery pack or dispose of it by throwing it into a fire. Do not leave the battery pack in a hot place (e.g., in a car on a sunny day or outside on a scorching day). Do not moisten or wet the battery pack with any fluid. Do not apply any strong force, shock, or drop the battery pack. Do not disassemble or alter the battery pack. If any liquid leaks from the battery pack, clean the case. Then mount a new battery pack. A fully charged battery pack looses power and deteriorates when stored for a long time. Charge the battery to about 50% capacity when storing for a long time. The LED of the battery pack on the front of the device flashes red when the battery pack needs to be charged. When the LED starts flashing, immediately turn the power off. Then replace the battery pack with a fully charged battery. Alternatively, charge the weak battery. See Section 1.3.2 Battery charging. vii If the battery pack is not correctly mounted or defective at the charging, the LED flashes in red. Correctly mount or replace the battery pack. The capacity of the battery pack decreases over time. The time which the battery can be used shortens as its capacity decreases. When the capacity of the battery has decreased to the point there is a significant reduction in service time despite normal charging, the battery is reaching the end of its service life. Replace the battery pack in this case. A battery pack lasts for about 500 charges. The service life of the battery pack varies depending on the ambient temperature and the operating environment of the device. If the battery pack is not used at room temperature (between 10 to 30 C), it may reach the end of its service life before being charged 500 times. The battery pack can be charged before the LED of the battery pack starts flashing in red. The battery pack can also be removed from the charger before charging is complete. A battery pack that has been stored for a long period of time needs to be charged before it is used. Dispose of any used batteries, according to the instructions of the Fujitsu service personnel. viii Usage in a cold region Low temperature (10 C or lower) degrades the performance of a battery. The life of the battery in a cold region may be shorter than the average. Follow the instructions listed below to efficiently use the battery:
1. When the LED of the battery flashes red, charge or replace the battery pack with a spare. 2. Warm the spare by keeping it in your pocket until ready to mount. When warming the spare with a body heater, be careful not to directly contact the heater to the battery. 3. A battery pack should be charged at room temperature (between 10 to 30 C). Efficient battery usage 1. Be careful not to allow any debris (such as sand or dust) into the terminals of the battery. If the terminals get dirty, clean them with a soft cloth. Then connect the battery to the charger or mount the battery in the device. 2. Even after being fully charged, the battery naturally will gradually lose power as time passes. Recharge the battery one or two days before use. 3. Store the battery pack in a cool place. To ensure long life, charge the battery pack at room temperature (between 10 to 30 C). Notes on long storage Store the device in a place free from the following: vibration, dust, extremely high or low temperature, high humidity, and direct sunlight. Cleaning 1. Covers Clean the covers with one of the following: a dry cloth; or a damp cloth, a cloth soaked in a diluted mild detergent and firmly squeezed. When using a cloth soaked in a soap-water solution, squeeze the cloth firmly enough to prevent any water from dripping into the device. Water may cause a device failure. Do not use volatile solvents such as thinner and benzene. They cause discoloration and may erase the characters on the covers. 2. Display Clean the display with one of the following:
-- a cloth soaked in water and firmly squeezed
-- a fine cloth, such as those used for cleaning eyeglasses ix Notation Marks used in this manual Mark NOTE Meaning Must be observed by the user as well as requests for the user. The user must read every NOTE.
& Advice &
References that must be observed by the user.
>>Reference>>
This indicates a reference.
This indicates the result in response to the operation. Indicates support for a specific option by a specific model within the TeamPad 7500 series products. Terms used in this manual Term Meaning Server Tap This indicates a terminal server to be connected to this unit. This means that a screen should be pressed on this unit once. Double tap This means that a screen should be pressed on this unit twice, in rapid succession. x Preface Notation....................................................................................................... x Marks used in this manual............................................................................ x Terms used in this manual ........................................................................... x Preface...........................................................................................................xi 1 Introduction to the TeamPad 7500 ...............................................1 1.1 Overview of This Unit ............................................................................ 1 1.2 Component Names................................................................................ 2 1.3 Battery Usage ....................................................................................... 7 1.3.1 Battery details................................................................................................7 1.3.2 Battery charging ............................................................................................8 1.3.3 Setting/Removing the battery......................................................................15 Setting the battery ......................................................................................................... 15 2 TeamPad 7500 Series Setup..........................................................16 2.1 Setting the Network ............................................................................ 16 2.2 Setting to connect the Server ............................................................. 19 2.3 Enter the Settings for the Terminal Server/Power Saving ..................... 23 3 Using This Unit ...................................................................................25 3.1 Turning on/off the Power Supply.......................................................... 25 3.1.1 Turning on the power supply ......................................................................25 3.1.2 Turning off the power supply.......................................................................27 3.2 Controlling the Speakers Volume.......................................................... 28 3.3 Confirming the Battery Status............................................................... 29 3.4 Controlling the Back Light of the Screen................................................ 31 3.5 Controlling the Contrast of the Screen................................................... 31 3.6 Calibration of the Touch Panel .............................................................. 32 xi 3.7 Adjusting the TeamPad 7500 Setup Settings ........................................ 35 3.7.1 Changing the setup settings........................................................................35 3.7.2 Initializing the setup settings.......................................................................35 3.8 Using the Screen Keyboard.................................................................. 37 3.8.1 Entering the characters................................................................................37 3.8.2 Changing the mode.....................................................................................37 4 LED Display ..........................................................................................37 4.1 LED Displayed While in Operation........................................................ 37 4.2 LED Displayed When the Power Supply Is On ....................................... 37 4.3 LED Displayed While Charging Is Performed......................................... 38 4.3.1 LED of this unit during charging..................................................................38 4.3.2 LED of the dual battery pack charger during charging ................................38 5 Spread Spectrum Radio ...................................................................40 6 KeyGen..................................................................................................40 7 RT Mouse..............................................................................................40 8 If A Message Is Displayed... ..........................................................42 9 Troubleshooting.................................................................................44 A TeamPad 7500 Series Specifications ..........................................44 B Expendable Supplies.........................................................................46 C Accessories ..........................................................................................47 D Optional Equipment ..........................................................................48 Index ................................................................................................. 49 xii 1 Introduction to the TeamPad 7500 Series 1.1 Overview of The TeamPad 7500 Series The TeamPad 7500 series is connected to a server (OS: Microsoft Windows 2000 Server or Microsoft Windows NT Server 4.0 Terminal Server Edition) through a Spread Spectrum (SS) radio LAN and is operated after securing the connection. This unit uses the application software on the server through an SS radio. The settings of the LAN and the SS radio are required for this unit to be connected to the server when setting up this unit. Server Application Software
(OS: Microsoft Windows 2000 Server or Microsoft Windows NT Server 4.0 Terminal Server Edition) LAN Spread Spectrum radio LAN base station Spread Spectrum radio TeamPad 7500 / 7510 1 1.2 Component Names
[Front]
1 3 4 2
[Bottom]
No. Component name Remarks 1 2 3 4 Radio antenna Built-in Battery case The case that holds the battery. Speaker Built-in LCD touch panel Hereafter called touch panel or screen. 1 2 No. Component name Remarks 1 2 AC adapter connector Charging terminal Connector for the AC adapter Terminal connected to the charging adapter 2
[Back]
PBT7500-16 1 2 4 10 9 8
[Back]
7 PBT7510-16 & PBT7510-18 11 22 44 1 01 0 99 88 13 5 6 1 31 3 55 66 1 11 1 1 21 2 33 77 3 No. Component name Remarks TP7500 TP7510 Bar code reader interface Will be supported. Extended interface Will be supported. Extended interface 2 Will be supported. Audio interface Will be supported. Hand strap Reset switch Attached to product Switch for restarting this unit IrDA interface Will be supported. Pen Touch panel pen Battery lock switch Switch for locking the battery Battery ROM cover/Sub battery PC card slot RAS switch Built-in system ROM and sub battery Slot for PCMCIA SS RF card For Maintenance purposes only
Prohibited The RAS switch should not be pushed, because the 7500 may change out of normal operation mode. 1 2 3 4 5 6 7 8 9 10 11 12 13 4
[Keys]
1 2 3 4 5 6 7 8 9 10 11 12 No. Component name Remarks 1 2 3 4 5 6 7 8 9 Power/Charging status LED Ten key Cursor key Clear key Backspace key System key Power key LED for displaying the power supply and charging status. Hereafter called LED. Hereafter called the [SYS] key. For turning on/off the power supply. Hereafter called the [PWR] key. Enter key Hereafter called the [ENT] key. Decimal Point key 10 11 Function key Back light key 12 Contrast key Hereafter called the [FUNC] key. For controlling the brightness of the back light on the screen. Hereafter called the [R] key. For controlling the contrast of the screen. Hereafter called the [+] key or the [-] key. The keyboard layout was designed with the intention that this unit can be held in a variety of comfortable ways and with the keyboard operating with the thumb of the user's right hand. The following figures demonstrate comfortable ways of holding and operating the 7500. 5
6 1.3 Battery Usage 1.3.1 Battery details Battery type The TeamPad 7500 Series thin client device has a 1750 mAh lithium ion battery. A battery has multiple terminals. Battery Life Charging and discharging a battery can be repeated approximately 500 times. The duration of battery life becomes shortened as it is used repeatedly. The battery should be replaced with a new one when the output the battery yields after a full charge becomes low. The batterys life depends on usage conditions such as ambient temperature and storage conditions. Charging Status LED The battery voltage may be below the specified voltage (6.6 V) when the LED flashes red at an interval of approximately 3 seconds. In this case, the battery should be charged, or replaced with a spare one. However, the LED does not flash red even if the battery voltage is below the specified voltage
(6.6 V) when the AC adapter is connected. Charging Request Message It can be set whether or not the message to request charging period is displayed.
>>Reference>> 2.2 Setting to connect the Server Battery status The battery status, residual battery capacity, residual expected available time, and charging/discharging count can be confirmed.
>>Reference>> 3.3 Confirming the Battery Status Trouble information LED A battery with a low amount of charge left is indicated when the LED flashes green at an interval of about 0.5 seconds. Replace the battery with a fully charged one. When the LED flashes red for 5 seconds at an interval of 0.5 seconds between series, this indicates a possible hardware fault with the 7500. Contact a Field Support Service Representative immediately. 7 1.3.2 Battery charging The battery should be charged when a new battery is used, or when the residual battery capacity is low. The battery can be charged by using any of the following three methods:
Charging with the Charge Stand (PBT7531-01) Direct charging the handheld with AC adapter (PBT7631-11) Charging with the Battery Pack Charger (PBT7531-03) The plug of the AC adapter or battery pack charger should not be pulled out of the plug socket until charging has been completed. The special charging adapter, AC adapter, and battery pack charger must be used, otherwise this unit may be damaged due to the difference in voltage or current capacity. NOTE This unit must be turned off before charging when the charging adapter or AC adapter is used. The optimum room temperature is 10oC to 30oC for charging activities. 8 Charge with the Charger Stand There are two methods of charging a TeamPad 7500 series thin client device with a charger stand. The first is to charge one handheld with one charger stand, and the other is to charge two units simultaneously with two charger stands. To charge a TeamPad 7500 series thin client device with a charger stand, follow the steps below. Approximately 2.5 hours of charge time is required to fully charge the handheld using a charger stand. Charging one unit with one charger stand This picture shows a TeamPad 7500 series sitting correctly in its charger stand. The charger stand and AC adapter (PBT7531-02) are required for using this method.
(1) Turn this unit off.
(2) Connect the AC adapter to the AC adapter connection interface of the charging adapter.
(3) Verify the voltage levels correspond between the AC Adapter and your AC outlet. Insert the plug of the AC adapter into the AC outlet. 9
(4) Set this unit with the battery upright on the charging adapter.
Charging will automatically begin. The LED turns green while the unit is being charged. The LED turns off when charging has completed. Charging time is approximately 2.5 hours. NOTE This unit must not be subjected to shock when setting this unit upright in the charging stand. Problems may occur with the unit or to the charging stand if the unit is subjected to shock. When the LED flashes green at an interval of approximately 0.5 seconds, it indicates that charging is not happening correctly. In this case, the battery voltage may be below the specified voltage, or even the charged voltage may not reach the specified value, or the battery may simply be damaged. The battery should be replaced with a new one. The LED turns off when the plug of the AC adapter is pulled out of AC inlet. Charging cannot be performed when the LED flashes red, because the AC adapter voltage is below the specified voltage The AC adapter may have a problem, therefore contact a field support service representative. The LED turns off when the plug of the AC adapter is pulled out of the AC inlet. Charging with two charge stands The following steps describe charging two handheld devices with two charger stands. An AC adapter and charging stand connector cable are required for using this method. PBT7531-11 contains a charge stand and the daisy chain cable. The picture below shows a single 7500 sitting correctly in a charging stand which has been linked together with a second charger stand via the charger stand connector cable. Charger Stand Connector cable
(1) Turn the 7500 off. 10
(2) Connect the plug sockets of the AC adapter connection interfaces of two charger stands to each other with the charger stand connector cable. NOTE: The charger stand has two AC adapter sockets, either socket may be used to connect using the charger stand connector cable.
(3) Connect the AC adapter to a non-utilized plug connector in any of the two charger stands.
(4) Verify the voltage levels match between the AC adapter and the power outlet. Insert the plug of the AC adapter into AC power outlet.
(5) Set this unit upright with the battery held in the charging adapter.
Charging will automatically begin. The LED turns green while the unit is being charged. The LED turns off when charging has completed. Charging time is approximately 2.5 hours. 11 NOTE This unit must not be subjected to shock when setting this unit upright in the charging stand. Problems may occur with the unit or to the charging stand if the unit is subjected to shock. When the LED flashes green at an interval of approximately 0.5 seconds, it indicates that charging is not happening correctly. In this case, the battery voltage may be below the specified voltage, or even the charged voltage may not reach the specified value, or the battery may simply be damaged. The battery should be replaced with a new one. The LED turns off when the plug of the AC adapter is pulled out of AC inlet. Charging cannot be performed when the LED flashes red, because the AC adapter voltage is below the specified voltage The AC adapter may have a problem, therefore contact a field support service representative. The LED turns off when the plug of the AC adapter is pulled out of the AC inlet. Charge with the AC adapter The method described below is to connect the AC adapter to the 7500 and charge the unit, while the battery remains in the unit. The AC adapter is required for using this method. The picture below illustrates this. AC Adapter PBT7631-11
(1) Turn the handheld off.
(2) Connect the AC adapter to the 7500 using the ac adapter port.
(3) Verify the voltage levels of the AC adapter match the AC outlet. Insert the plug of the AC adapter into the AC outlet.
Charging will automatically begin. 12 The LED turns green while the unit is being charged. The LED turns off when charging has completed. Charging time is approximately 2.5 hours. NOTE When the LED flashes green at an interval of approximately 0.5 seconds, it indicates that charging is not happening correctly. In this case, the battery voltage may be below the specified voltage, or even the charged voltage may not reach the specified value, or the battery may simply be damaged. The battery should be replaced with a new one. The LED turns off when the plug of the AC adapter is pulled out of AC inlet. Charging cannot be performed when the LED flashes red, because the AC adapter voltage is below the specified voltage The AC adapter may have a problem, therefore contact a field support service representative. The LED turns off when the plug of the AC adapter is pulled out of the AC inlet. Charge with the dual battery pack charger The steps below describe charging the 7500 main battery with the dual battery pack charger
(PBT7531-03). The picture below shows the dual battery pack charger with one 7500 main unit battery in correct charging position.
(1) Connect the AC cable, which accompanies the dual battery pack charger, to the pack charger.
(2) Verify the voltage levels of the AC cable correspond with the AC outlet. Insert the AC cable in the AC outlet.
(3) Connect the battery to the battery pack charger. Up to two batteries can be connected simultaneously.
Charging will automatically begin. The LED turns green while the unit is being charged. The LED turns off when charging has completed. Charging time is approximately 2.5 hours. 13 NOTE If the LED of the dual battery pack charger flashes red, verify that the battery(s) is connected securely inside the pack charger. If the battery(s) is connected correctly and the LED is still flashing red, than that indicates a problem with the battery or the battery has reached the end of its life cycle. Replace the battery(s) with a new one. 14 1.3.3 Setting/Removing the battery Setting the battery
(1) Two battery lock switches reside on the back surface of the 7500 series device. Slide the battery lock switches to the [UNLOCK] position.
(2) Insert the battery correctly into the handheld until a click is heard.
(3) Slide the battery lock switches to the [LOCK] position.
(4) Reverse these steps to insert a new or fully charged battery into the handheld. NOTE The power supply will turn on when the battery lock switches are set to the [LOCK]
position. Insert the battery Upper battery lock switch Downward to UNLOCK LOCK U Lower battery lock switch 15 2 TeamPad 7500 Series Setup Correct setup of the TeamPad 7500 series device consists of the following tasks:
Network Settings Change network settings and Spread Spectrum radio settings. Server Settings Set connect entry to server. Terminal Server/Power Saving Settings Set power saving and auto-connect to server settings. NOTE Before setup can begin, please charge the battery and insert it into the handheld. For more information, please refer to:
1.3 Battery Usage
>>Reference>> 3.7 Adjusting the TeamPad 7500 Setup Settings when it is set up again. 2.1 Setting the Network
(1) Turn this unit on by pressing the PWR key until LED flashes bright green (about 1 second).
This unit will boot up, and the [Change Settings] window for network settings will be displayed. NOTE This battery might be damaged if the LED flashes green for 5 seconds at an interval of 16 about 0.5 seconds. Replace with a new battery. There might be a hardware fault if the LED flashes red for 5 seconds at an interval of about 0.5 seconds. Contact a field support service representative.
(2) Tap on the [Yes] button on the [Change Settings] window for network settings.
The screen keyboard and control panel are displayed.
>>Reference>> 3.8 Using the Screen Keyboard for more information on the screen keyboard.
& Advice &
Tap on the [No] button to set the terminal server/power saving without changing the network settings when this unit is set up again. By tapping on the [No] button, the screen keyboard and the [Power savings and connecting to Terminal Server] window is displayed.
>>Reference>> 2.2 Setting to connect the Server about the [Change setting] window for network settings.
(3) Double-tap on the [Network] icon on the control panel.
The [Network] window is displayed.
(4) Set the items on the [Network] window according to the explanation displayed on the
[Network] window. Tap on the [OK] button after the setting has been terminated.
The [Network] window is closed. NOTE Ignore the following message displayed, and tap on the [OK] button:
The new setting becomes valid when the adapter is used the next time. The new setting becomes valid by reinserting the adapter into the device after taking it out of the device if the adapter has been Inserted into the device. NOTE If using a Symbol Spectrum24 card, refer the following action. If using another venders RF card, please refer to that specific setup instruction for that vender's RF card.
(5) Double-tap on the [Spectrum24 Settings] icon on the control panel to change the SS radio setting.
The [Spectrum24 Settings] window is displayed.
(6) Set the items on the [Spectrum24 Settings] window. Tap on the [OK] button after the setting has been terminated. 17 NOTE Contact a network system administrator to confirm the settings of items on the
[Spectrum24 Settings] window.
The [Spectrum24 Settings] window is closed.
(7) Tap on [Close] from the [File] menu on the control panel.
After the control panel is closed, the [Power savings and connecting to Terminal Server]
window is displayed. 18 2.2 Setting to connect the Server
>>Reference>> 3.8 Using the Screen Keyboard for more information on about the screen keyboard.
(1) Tap on the [Yes] tab on the [Change settings] window.
The [WTS Connection Wizard] window is displayed.
& Advice &
Tap on the [No] tab, dont change WTS connection settings to change settings of this unit. Tap on the [No] tab, display the [Setting the Terminal Server/Power Saving] window.
>>Reference>> 2.3 Enter the Settings for the Terminal Server/Power Saving to display the Setting the Terminal Server/Power Saving window.
(2) Set the following settings with the 1st WTS Connection Wizard windows. 19
[Name] entry field Input fht. (Fixed)
[Server] entry field Input the servers IP address.
[Low Speed Connection] check box Dont use Low Speed Connection. Dont check this check box.
& Advice &
Following items is the tab which mean the WTS connection wizard window.
[Back] bottom Back 1 window to display the WTS connection wizard window.
[Next] bottom Forward 1window to display the WTS connection wizard window.
[Cancel] bottom Cancel all settings with the WTS connection wizard windows, and display the Setting the Terminal Server/Power Saving window.
>>Reference>> 2.3 Enter the Settings for the Terminal Server/Power Saving to display the Setting the Terminal Server/Power Saving window.
(3) Tap on the [Next] tab.
Display the 2nd [WTS Connection Wizard] window. 20
(4) Set the following settings on the 2nd [WTS Connection Wizard] window.
[Automatic Connection To Server] check box This check box sets whether or not this unit is automatically connected to the server when this unit is turned on. NOTE Dont uncheck this checked box, the user name, password, and the domain name must be entered by pressing the Ten key when this unit is connected to the server.
>>Reference>> 3.1.1 Turning on the power supply Usually, you can check off [Automatic Connection To Server] this check box.
[Username] entry field Enter this field when [Automatic Connection To Server] check box. Enter the username to connect the server automatically.
[Password] entry field Enter this field when [Automatic Connection To Server] check box. Enter the password to connect the server automatically. Enter the same password to entry the server in [Password] entry field. When the [Password] entry field over flow at the server, an error has occurred at the end of
[WTS Connection Wizard]. At this time, enter the correct [Password] entry field.
[Domain] entry field Enter this field when [Automatic Connection To Server] check box. Enter the domain to connect the server automatically.
(5) Tap on the [Next] tab.
Display the 3rd [WTS Connection Wizard] window. 21
(6) Set the following settings on the 3rd [WTS Connection Wizard] window.
[Desktop]
Select [Desktop] when an application software is not started just after connecting to the server.
[Application File Name]
Select [Application File Name] when an optional application software is started just after connecting to the server. Enter the file name of the application software to be started to the lower entry field, starting with the drive name.
[Work Directory] entry field The [Work Directory] entry field becomes valid when [Application File Name] is selected in
[Program Started When Connecting To Server].
(7) Tap on the [Next] tab.
Display the 4th [WTS Connection Wizard] window and display the connection entry to set this time. Dont tap on the [Next] tab at the 3rd [WTS Connection Wizard] window, make sure to set the [Application File Name] and [Work Directory].
(8) Tap on the [Finish] tab on the 4th [WTS Connection Wizard] window. 22
Close the [WTS connection wizard] window, and display the [Setting the Terminal Server/Power Saving] window.
This is the end of operation to set connection the server. Refer back to 2.3 Enter the Settings for the Terminal Server/Power Saving for more information on this process. 2.3 Enter the Settings for the Terminal Server/Power Saving
>>Reference>> 3.8 Using the Screen Keyboard for more information about the screen keyboard
(1) Tap on the [Power saving] tab on the [Power savings and connecting to Terminal Server]
window.
(2) Set the following with the [Power savings] tab:
[Default brightness of back light]
Select the brightness of the back light when the power supply of this unit is turned on, from the list box.
[Auto back light off timer]
Select the time between the no-operation time and the automatic set to the darkest setting of this unit from the list box. Select [Inhibit] if the back light is not set to the darkest setting automatically.
[Auto power off timer]
Select the time between the no-operation time and the automatic power-off of this unit from the list box. Select [Inhibit] if the power supply of this unit is set to not automatically turn off.
[Battery low message]
Click off the check box to display the message when the residual battery capacity has reached a low amount. 23
(3) Tap on the [Server connection] tab.
(4) Set the following with the [Server connection] tab:
[Auto Connect to a server]
Click off the [Enable] check box to connect server automatically when terminal is turned on.
& Advice &
If [Enable] check box is not checked off, the [Terminal Server client] window will be displayed when terminal is turned on. It can control server connection with using
[Terminal Server Client] windows. The server name on [Terminal Server client] windows will be set with the value is configured on [Server] entry field of [WTS wizard] as default.
>>Reference>> Please refer to 3.1.1 Turning on the Power Supply about [Terminal Server Client]
Please check this check box normally.
(5) Tap on the [OK] button on the [Power savings and connecting to Terminal Server] window.
The [Save Settings] window is displayed. 24
& Advice &
The [Initialize] tab is used for initializing the setup settings.
>>Reference>> 3.7.2 Initializing the setup settings
(6) Tap on the [Yes] button on the [Save Settings] window. Tap on the [No] button to terminate the setup without saving any information that has been set during the setup.
The information set during the setup is not saved, and the power supply of this unit is automatically turned off if the [Yes] button has been tapped. NOTE It takes a few seconds for the power supply of this unit to be automatically turned off. The [PWR] key must not be pressed before the unit powers off automatically. 3 Using The TeamPad 7500 Series Units 3.1 Turning on/off the Power Supply 3.1.1 Turning on the power supply
(1) Press the PWR key while the power supply is being turned off.
The power supply is turned on. The LED is lit in green while the screen is not displayed. NOTE There might be a possible hardware fault if the LED flashes red for 5 seconds at an interval of about 0.5 seconds. Contact a field support service representative. The [Change setting] window for network settings is displayed by pressing the [PWR]
key when this unit has not set up, or when the setup settings have been initialized. Press the [PWR] key again after performing the setup.
>>Reference>> 2 TeamPad 7500 Setup about the setup.
& Advice &
This unit will automatically attempt to connect to the server by turning on the power 25 supply of this unit when the automatic connection to the server is set during the setup. Enter the IP address of the server in the [Terminal Server Client] window. To display this window press the Ten key when turning on this unit if the automatic connection to the server has not been set during the initial setup.
>>Reference>> 2.3 Enter the Settings for the Terminal Server/Power Saving about the automatic connection to the server. 26 3.1.2 Turning off the power supply
(1) Execute any of the following operations:
Terminate any application software currently running. Press and hold the [PWR] key (for about 3 seconds) until the power supply has turned off, if the application software is not starting.
The power supply is turned off. Perform the operation (2) continuously if the power supply is not turned off after terminating the application software.
(2) Execute any of the following operations if the power supply is not turned off even by executing the operation (1):
Tap on the [Power Off] button if the [Reconnect to the Terminal Server] window is displayed. Press and hold the [PWR] key (for about 3 seconds) until the power supply is turned off if the [Reconnect to the Terminal Server] window is not displayed.
The power supply is turned off. 27 3.2 Controlling the Speakers Volume The following describes the operation to control the speakers volume. NOTE The volume is automatically set to [High] when this unit has been restarted using the Reset switch, or when the battery has been replaced with a new one. Adjust the speakers volume if necessary.
(1) Press the [R] key by holding on the [SYS] key while the power supply is being turned on.
The [Volume and Battery] window will be displayed.
>>Reference>> 3.3 Confirming the Battery Status for battery information.
(2) Select the speakers volume from [Volume].
(3) Tap on the [OK] button. 28 3.3 Confirming the Battery Status The following describes the operation to confirm the battery status, residual battery capacity, residual expected available time, and charging/discharging count.
(1) Press the [R] key by holding on the [SYS] key while the power supply is being turned on.
The [Volume and Battery] window is displayed.
>>Reference>> 3.2 Controlling the Speakers Volume for adjusting the speakers volume.
(2) Confirm the battery status by using [Battery]. The items in [Battery] have the following meanings:
Status The battery status is displayed as [Normal], [Insufficient Residual Capacity], [Abnormal], or [Undetermined]. NOTE The battery capacity is insufficient if [Insufficient Residual Capacity] is displayed. Charge the battery, or replace it with a spare battery. The battery is abnormal if [Abnormal] is displayed. Replace it with a spare battery. Please press the [R] key by holding on the [SYS] key again. The battery or this unit is abnormal if [Undetermined] is displayed after few times pressing the [R] key by holding on the [SYS]. Please contact field support service. 29 Residual battery capacity The residual battery capacity is displayed with %. However, [Undetermined] will be displayed in [Residual Battery Capacity] if
[Undetermined] is displayed in [Status]. Residual expected available time The residual expected available time for the battery is displayed in the unit of minutes. However, [Undetermined] will be displayed in [Residual Expected Available Time] if
[Undetermined] is displayed in [Status]. Charging/discharging count The charging/discharging count where the battery was repeated in the past is displayed. However, [Undetermined] will be displayed in [Number of Charging/Discharging periods] if
[Undetermined] is displayed in [Status].
(3) Tap on the [OK] button. 30 3.4 Controlling the LCD Panel Back Light The following describes the operation to control the LCD panel back light.
>>Reference>> 2.2 Setting to connect the Server about setting the back light brightness when turning on the power supply.
(1) Press the [R] key while the power supply is being turned on.
Each time the [R] key is pressed, the brightness of the back light is changed as follows:
Dark Slightly dark Slightly bright Bright 3.5 Controlling the Contrast of the LCD Panel The following describes the operation to control the contrast of the LCD panel.
(1) Press the [+] key or [-] key while the power supply is being turned on.
The darkness of the screen is increased each time the [+] key is pressed. The brightness of the screen is increased each time the [-] key is pressed. 31 3.6 Calibration of the LCD Touch Panel The LCD touch panel has lost calibration accuracy if the touch panel does not respond when tapping on the screen, or if a different portion of the touch screen is activated other than the part which received the input. In this case, the operation to correct the inaccuracy of the touch panel should be executed. This operation is called Touch Panel Calibration. There is no need to perform this calibration when this unit is purchased, because the touch panel has been calibrated. NOTE The [PWR] key must not be pressed while the touch panel calibration tool is running. The touch panel calibration would then need be re-executed because the setting of touch panel calibration becomes invalid if the [PWR] key is pressed. The touch panel calibration must be executed using a fully-charged battery or using the AC adapter connected to the unit. The setup settings are initialized if the battery capacity has become insufficient during the touch panel calibration. If battery charge become low during the touch panel calibration, replace the battery, then re-execute the touch panel calibration.
(1) Press the [PWR] key by holding on the [SYS] key while the power supply of this unit is being turned off.
The touch panel calibration screen is displayed.
(2) Tap on the [+] mark displayed on the touch panel calibration screen with a stylus. Tap on the [Cancel] button to stop the touch panel calibration. NOTE The tapped [+] does not disappear if the tapped position is about 1 cm distant from the 32 center of [+]. In this case, tap on the [+] mark again.
& Advice &
The touch panel calibration can be stopped by pressing the [ENT] key if the [Cancel]
button is not valid.
The tapped [+] disappears, and another [+] is displayed at a different position. However, the touch panel calibration will stop, and the unit will restart if the [Cancel]
button is tapped.
(3) Tap on [+] with a pen. Five [+] symbols are sequentially displayed. Tap on these five symbols with a pen in the order indicated on the display.
The touch panel calibration completion window is displayed by tapping on the fifth [+]
symbol.
(4) Tap on the [OK] button on the message window.
& Advice &
The touch panel calibration can be terminated by pressing the [ENT] key if the [OK]
button is invalid.
This unit is restarted.
% Request %
The setup settings are initialized if the battery becomes insufficient from when the
[OK] button is tapped until this unit is restarted. Perform the setup functions again. 33 It takes a few seconds for this unit to be restarted after tapping on the [OK] button. The [PWR] key must not be pressed before this unit is restarted. 34 3.7 Adjusting the TeamPad 7500 Setup Settings 3.7.1 Changing the setup settings The following describes the operation to change the setup settings.
(1) Press the [PWR] key while holding down the [FUNC] key, [SYS] key, and an optional location on the touch panel when the power supply of the unit is being turned off.
This unit is started, and the [Change setting] window for network settings is displayed.
(2) Change the setup settings according to your needs.
>>Reference>> From the operation (2) in 2.1 Setting the Network to 2.3 Enter the Settings for the Terminal Server/Power Saving about the setup settings. 3.7.2 Initializing the setup settings The following describes the operation to initialize the setup settings to the mode when this unit is purchased.
& Advice &
The [Change setting] window for network settings is displayed by turning on this unit after initializing the setup settings. Set the network. The touch panel calibration mode is not initialized even if the setup settings are initialized.
(1) Press the [PWR] key while holding on the [FUNC] key, [SYS] key, and an optional location on the touch panel when the power supply of this unit is being turned off.
This unit is started, and the [Change setting] window for network settings is displayed.
(2) Tap on the [No] button on the [Change setting] window for network settings.
The screen keyboard and [Power savings and connecting to Terminal Server] window is displayed.
(3) Click on the [Initialize] tab on the [Power savings and connecting to Terminal Server] window.
(4) Click off the [Initialize] check box in the [Initialize] tab. 35
(5) Tap on the [OK] button on the [Power savings and connecting to Terminal Server] window.
The [Save Settings] window is displayed.
(6) Tap on the [Yes] button on the [Save Settings] window. However, if the setup settings are not initialized, then tap on the [No] button.
The setup settings are initialized, and the power supply of this unit is automatically turned off if the [Yes] button has been tapped. The setup settings are not initialized, and the power supply of this unit is automatically turned off if the [No] button has been tapped. 36 3.8 Using the Screen Keyboard The screen keyboard is a full alphanumeric keyboard which can be accessed by pressing the [SYS]
and [DOWN ARROW]. 3.8.1 Entering the characters
(1) Tap on a key on the screen keyboard.
The character is entered. 3.8.2 Changing the mode The screen keyboard has two modes, i.e., alphabetical lowercase character mode and alphabetical uppercase character mode. The screen keyboard is displayed in alphabetical lowercase character mode.
(1) Tap on the [CAP] key on the screen keyboard while the screen keyboard is being displayed.
The alphabetical lowercase character mode and alphabetical uppercase character mode are switched alternately each time the [CAP] key is tapped. 4 LED Display The following explains the action to be taken when the LED is lit or flashes. 4.1 LED Displayed While in Operation Take action according to the following Response if the LED blinks during operation:
LED display Color Display status Response Red Flash (at an interval of about 3 seconds) The battery voltage is below the specified voltage. Charge the battery, or replace the battery with a spare battery. However, the LED does not blink when this unit is connected to the AC adapter, even if the battery voltage is below the specified voltage. 4.2 LED Displayed When the Power Supply Is On Take action according to the following Response if the LED is lit or flashes when the power supply is turned on:
37 LED display Color Display status Green Fully Lit Red Blink (for 5 seconds at an interval of about 0.5 seconds) Response This unit has initiated the boot up process. The LED is lit when the [PWR] key is pressed until the screen is displayed. This unit is abnormal. Contact a Field support service representative. 4.3 LED Displayed While Charging Is Performed 4.3.1 LED of this unit during charging Take action according to the following Response if the LED of this unit is lit or flashes while charging is being performed:
LED display Color Display status Green Lit Green Flash
(at an interval of about 0.5 seconds) Red Lit Response Charging is being performed. The LED switches off after charging is completed Charging is not performing normally. The battery voltage is below the normal voltage range, or the battery voltage has not reached the specified voltage even after charging has completed. Replace the battery with a new one. The LED switches off by pulling the plug of the AC adapter out of the plug socket. The AC adapter voltage is below the specified voltage , so charging cannot be performed. The AC adapter may have a problem, therefore contact a field support service. The LED switches off by pulling the plug of the AC adapter out of the plug socket. 4.3.2 LED of the dual battery pack charger during charging Take action according to the following Response if the LED of the dual battery pack charger is lit or flashes while charging is being performed:
LED display Color Display status Response Orange Lit During charging. 38 Green Lit Red Blink Charging is completed. Charging cannot be performed since the battery may not be connected correctly to the battery pack charger or the battery may be damaged. Correctly connect the battery to the battery pack charger, or replace the battery with a new one. 39 5 Spread Spectrum Radio The TeamPad 7500 series of thin client devices are designed for use with PCMCIA RF radio cards and radio LAN based access points for communication with a terminal server. The TeamPad 7500 series devices are RF friendly devices and have been tested with PCMCIA radio cards and RF backbone equipment from the major RF equipment vendors. Please refer to your Fujitsu-ICL Systems, Inc. technical representative for information regarding specific TeamPad 7500 series models and FCC certification of specific RF solutions. The radio system of this unit adopts the spectrum diffusion system by using the spread spectrum 2.4 GHz band. The user can use this unit without obtaining the radio communication license. The communicable range is within a 7 m to 35 m radius from the base station as a center under the environment of a shop.
(The communicable range depends greatly on the environment. The communicable range is up to 70 m or so for the open space.) CAUTION This unit must not be used near machinery which may cause electric noises such as microwave oven and security gate. This unit should be used distant from TV, radio, and other radio sets. 40 6 KeyGen Keygen is a utility program that allows the input of data from a PSC 6000 QuickScan scanner attached to a TeamPad 7500 series bar code port. The program attaches it self to the BCR port, intercepts data from the scanner and passes it to the operating system as though the data came in as keyboard data. The data is passed to the currently open application. Installation:
1. Copy the keygen.exe to the appropriate directory (C:\Fujitsu) on your Terminal Server. 2. On your TeamPad 7500 series device, create a shortcut that points to keygen.exe 3. Drag that shortcut into the startup folder if you want keygen to start automatically. Otherwise just leave it on your desktop and start it manually. 7 RT Mouse RTMouse is a utility program that converts a tap on the LCD panel (mouse click) on a TeamPad 7500 series device from a left mouse click (default) to a right mouse click. The program facilitates the right mouse click functions required by the Windows operating environment, such as when defining a new desktop icon (shortcut). Installation:
1. Copy the rtmouse.exe to the appropriate directory (C:\Fujitsu) on your Terminal Server. 2. On your TeamPad 7500 series device, create a shortcut that points to keygen.exe 3. Drag that shortcut into the startup folder if you want keygen to start automatically. Otherwise just leave it on your desktop and start it manually. 41 8 If A Message Is Displayed... Take action according to the Response if any of the following messages are displayed. Message Response The DHCP could not obtain the IP address. Reinsert the card, or allocate the address manually. The DHCP could not obtain the IP address. Verify whether or not the network has been set for the DHCP to obtain the IP address. Contact the network administrator if the problem persists. An error has occurred, therefore stop the touch panel calibration. An error has occurred during the touch panel calibration. Tap on the [OK] button to stop the touch panel calibration, then re-execute the touch panel calibration.
>>Reference>> 3.6 Calibration of the Touch Panel if an error occurs frequently, contact a Field support service representative. The connection to the server has failed. Verify the setup settings.
>>Reference>> 3.7 Adjusting the TeamPad 7500 Setup Settings The residual battery capacity has become insufficient. Charge the battery, or replace the battery with a new one.
>>Reference>> 1.3 Battery Usage The server could not be connected. Charge the battery. An error has been detected in the flash ROM. The set data stored in the flash ROM has been damaged. Set up this unit again.
>>Reference>> 3.7 Adjusting the TeamPad 7500 Setup Settings Contact a Field support service representative if an error occurs frequently. No data can be saved in the flash ROM. No data can be written to the flash ROM. Contact a Field support service. The flash ROM clearing has failed. The flash ROM cannot be cleared. Contact a Field support service. Message Response The radio LAN driver has not been The radio LAN driver has not been installed or has 42 installed. Terminal Server Client Disconnected. been damaged. Contact a Field support service representative. The message may have exceeded the radio communication range. Send the message again within the radio communication range.
>>Reference>> 5 SS Radio 43 9 Troubleshooting Take action according to Response before contacting a Field support service representative if any of the following symptoms has been detected during using this unit. Symptom Response The power supply cannot be turned on. The battery charge may be low. Replace the low capacity battery with a fully charged one.
>>Reference>> 1.3 Battery Usage The battery may have reached the end of its lifecycle. Replace the insufficient battery with a new one.
>>Reference>> 1.3 Battery Usage Make sure the battery has been correctly installed. For example, the battery lock switch might be set to the
[UNLOCK] setting.
>>Reference>> 1.3.3 Setting/Removing the battery The screen has either been significantly darkened or brightened, therefore it is hard to see. Control the contrast of the screen.
>>Reference>> 3.5 Controlling the Contrast of the Screen The screen is displayed briefly and disappears when the power supply is turned on by pressing the [PWR] key. The battery charge may be low. Replace the low capacity battery with a charged one.
>>Reference>> 1.3 Battery Usage The battery charge may be low. Replace the battery with a charged one.
>>Reference>> 1.3 Battery Usage No sound is coming from the speaker. The speakers volume may be set to [SILENCE]. Verify the speakers volume. The touch panel is not valid. Terminal Server Client Disconnected.
>>Reference>> 3.2 Controlling the Speakers Volume The coordinates on the touch panel may have shifted. Execute the touch panel calibration.
>>Reference>> 3.6 Calibration of the Touch Panel The message may have exceeded the radio communication range. Send the message again within the radio communication range.
>>Reference>> 5 SS Radio A TeamPad 7500 Specifications 44 Item Specifications Controller CPU 64-bit RISC CPU -- 85MHz Memory ROM: 16 MB + 2 MB (Flash ROM) Display Type Screen size Display lighting Operation panel Audio Radio RAM: 16 MB 600 (length), SVGA, 256 colors LCD 800 (width) High-brightness back light with the FL tube Touch panel, Back Light key, Contrast key, Contrast key (
2), Function key, System key, Power key, Reset switch, Ten key, Enter key, Cursor key, Clear key, Decimal Point key, Backspace key. Speaker output (Speaker x 1 built-in) 2.4 GHz, spread spectrum, radio LAN, based on 802.11, 2 Mbps. Power supply Battery Li ion battery pack, 1750 mAh Environmental conditions Operational time Approx. 3 hours Charging period Temperature About 2.5 hours Operation: 32oF to 104oF (0oC to 40oC) Storage: -4oF to 140oF (-20oC to 60oC) Humidity Operating: 20% to 85%
Dimensions Weight Storage: 20% to 85%
10.0" W x 1.0" H x 7.0" D (255 1.9 lbs. 860g (including the batterys weight) 25 178 mm) 45 B Expendable Supplies The following describes the expendable supplies which the user needs when making replacements in this unit. Product name Product number Life 1750 mAh Battery Pack PBT7531-05 About 500 charging and discharging times
(The charging and discharging count may be less than 500, depending on the operational conditions.) Other parts except the above may need to be replaced at the users cost if they are used beyond the Fujitsu-defined limits of use. Contact a Field support service representative for details of the Fujitsu-defined limits of use as well as the parts that may be replaced. 46 C Accessories Accessory Remarks Battery pack Pen Stylus Hand strap 1 ea. PBT7531-05 1 ea. PBT7633-05 1 ea. PBT7633-01 Instruction Manual 1 ea. PBT90000079
The pen and hand strap can be purchased individually by specifying the above Model numbers.) 47 D Optional Equipment Product name Model number Specification Dual Battery Pack Charger PBT7531-03 Unit for charging one or two batteries. The charging period is about 2.5 hours. Neck strap FHTNS701 Strap used for suspending this unit from the neck of the user 48 Index Accessories................................................................................. 45 Battery charging..................................................................................7 details.....................................................................................6 removing.............................................................................. 14 setting .................................................................................. 14 status, confirming.................................................................. 28 usage......................................................................................6 Calibration of the touch panel....................................................... 31 Changing mode ........................................................................... 35 Charging with AC adapter ............................................................ 11 Charging with battery pack charger ............................................... 12 Charging with charging stand..........................................................8 Component names.........................................................................2 Controlling back light................................................................... 30 Controlling contrast ..................................................................... 30 Controlling speaker's volume........................................................ 27 Entering characters...................................................................... 36 Expendable supplies..................................................................... 44 LED........................................................................................... 36 displayed while in operation.................................................... 36 displayed while power supply is on ......................................... 37 of battery pack charger during charging................................... 38 of this unit during charging..................................................... 37 A B C E L M 49 O P S T U Message ..................................................................................... 40 Optional equipment ..................................................................... 46 Power supply turning off ............................................................................ 25 turning on............................................................................. 25 Setting network........................................................................... 18 Setting terminal server/power saving ............................................. 22 Setup changing settings ................................................................... 34 initializing settings.................................................................. 34 operation to be performed first ............................................... 17 Specifications.............................................................................. 43 SS radio ..................................................................................... 39 TeamPad (FHT601) before using............................................................................1 overview of ............................................................................1 using.................................................................................... 25 Troubleshooting.......................................................................... 42 Using screen keyboard................................................................. 36 50
| 1 2 3 4 5 6 7 8 | Teampad 500 System Users Guide | Users Manual | 316.56 KiB | December 06 2001 |
TeamPad500 System User's Guide Revision 1.00.00 March 27, 2001 P/N 90000455 TeamPad 500 Users Guide Revision History Revision Number Date Description of Change 1.00.00 2-1-2001 Original Release Copyright 2001 by Fujitsu-ICL Systems Inc. 2 of 47 TeamPad 500 Users Guide Read this manual before using this product. User's Guide Thank you for purchasing the TeamPad 500 (referred to as the "equipment" in this document). To ensure proper operation and satisfactory performance of this product, be sure to read this manual thoroughly before using this equipment. Intention of the Users Guide To document the functionality of the display screens that are unique to the equipment. This document is not intended to document Windows CE 2.12.It is assumed that the user has knowledge of the features and functionality of Windows CE. Windows, Windows CE, Visual C++, and Visual Basic are registered trademarks of Microsoft Corporation in the U.S. and other countries. Copyright 2001 by Fujitsu-ICL Systems Inc. 3 of 47 TeamPad 500 Users Guide Table of Contents 1 2 3 4 5 1.1 1.2 1.3 1.4 1.5 2.1 2.2 2.3 3.1 3.2 Quick Start Checklist ......................................................7 Open the Package ........................................................7 Turn the Power On .......................................................7 Equipment Startup .......................................................7 Application Setup and Configuration .....................................7 Run Installed Applications ..............................................7 Equipment Startup ..........................................................8 Startup check ...........................................................8 Touch Panel Calibration .................................................9 Date and Time Settings .................................................10 Application Setup and Configuration .......................................11 Setup Menu .............................................................11 Control Panel ..........................................................12 3.2.1 System Properties ...................................................13 3.2.2 Power Management Properties .........................................14 3.2.3 Display Properties ..................................................15 3.2.4 Date and Time Properties ............................................16 3.2.5 Screen Input Panel (SIP) Keyboard Size ..............................17 Application Installation ...............................................19 TeamPad Configuration ..................................................21 3.4.1 Initialize Settings .................................................21 3.4.2 Launcher Keys .......................................................23 3.4.3 Registry Backup and Restore .........................................25 3.4.4 Combination Keys ....................................................27 Application Backup and Restore ............................................28 Registry Editor ........................................................30 TeamPad Explorer .......................................................32 Run a Program ..........................................................35 Debug Mode .............................................................36 Basic Operations ..........................................................37 Turning on the backlight ...............................................37 Battery Status .........................................................37 Adjusting the Sound Volume .............................................39 Touch Panel Calibration ................................................40 Alpha Keyboard Pop-up ..................................................41 Low Main Battery Warning ...............................................42 Low Sub Battery Warning ................................................43 Restoring the Application .................................................44 Touch Panel Calibration ................................................45 Date and Time Settings .................................................46 Restore/Re-Initialize the Application ..................................47 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.1 4.2 4.3 4.4 4.5 4.6 4.7 5.1 5.2 5.3 Copyright 2001 by Fujitsu-ICL Systems Inc. 4 of 47 TeamPad 500 Users Guide Warnings This manual uses various indications to urge the user to use the equipment safely, to prevent personal injury or property damage. Be sure to understand these indications and their meanings before continuing to read this manual. Symbol CAUTION Description This alert signal also indicates that damage to the product or other property may occur if the user does not perform the procedure correctly. Other symbols Symbol Important Remember Description This indicates precautions on use or what must not be done. Read the statement carefully. Indicates advice or reference information. Read the statement when necessary. Screen and entry examples The screen display examples are given purely as examples and apply to individual situations. Keep in mind that the actual screens may differ. The data in the entry examples is given purely as example and applies to individual situations. Keep in mind that the actual data required for entry may differ. Key notations Key PWR key Numerical keys
(0 to 9) ENT key Cursor keys CLR key BKS key SFT key F1-F5 keys Key Key (+/-) Meaning Use this key to turn the power to the equipment on or off (this key is called the power key in this document). Use these keys to enter numbers Enter key. Use this key to confirm and execute operations. Use these keys to move the cursor in the desired direction. Use this key to cancel operations and clear data entries. Backspace key. Shift key. Use this key to perform shifted operations. Function keys. Use these keys to perform special operations. Backlight key. This key is used to adjust the contrast (+ for more contrast and -
for less contrast). Copyright 2001 by Fujitsu-ICL Systems Inc. 5 of 47 TeamPad 500 Users Guide Touch panel operation The equipment has a touch panel display. Tapping on the screen has the same effect as left tapping with the mouse. Method of screen tapping is explained below. Meaning Similar to left tapping a mouse. Denotes touching a point on the screen. This is done to execute an operation. Corresponds to double tapping a mouse. Denotes double touching a point on the screen. This is done to run a program. Notation Tap Double tap CAUTION When tapping the screen, use your finger or a dedicated accessory stylus (a pen for tapping). Do not use a tool with a sharp edge in place of the dedicated stylus, as this may damage the panel. Copyright 2001 by Fujitsu-ICL Systems Inc. 6 of 47 1 Quick Start Checklist TeamPad 500 Users Guide When using the equipment for the first time, follow the procedure given below. 1.1 Open the Package Remove the equipment from the package. For details, refer to the Quick Reference Guide that comes with the equipment. 1.2 Turn the Power On Connect the equipment to an AC adapter or charging unit to provide power to the main and sub batteries. Press the power switch to turn on the power. For details, refer to the Quick Reference Guide that comes with the equipment. 1.3 Equipment Startup After turning the power on, follow the steps in Equipment Startup (see section 2) to initialize the equipment. 1.4 Application Setup and Configuration Configure the equipment through the Setup Menu. For details, refer to Section 3. Follow the installation instructions provided by the application provider. 1.5 Run Installed Applications Start the equipment to verify that the unit is properly configured. Remember The main battery is not charged. Be sure to charge it or connect the AC adapter to the equipment before starting with operations. When turning on the power for the first time, or after a hard reset (ie both batteries removed) a check is made on the equipment. If the unit has never been installed and configured through the Setup Menu the following equipment check screen is displayed. Copyright 2001 by Fujitsu-ICL Systems Inc. 7 of 47 TeamPad 500 Users Guide 2 Equipment Startup 2.1 Startup check To begin the startup procedure: Hold down the ENT/SYS key, then press the 1 Key to Start the Touch panel calibration. To stop the startup procedure: Turn off the power by pressing the power key. Copyright 2001 by Fujitsu-ICL Systems Inc. 8 of 47 TeamPad 500 Users Guide 2.22.22.22.2 Touch Panel Calibration The following calibration screen will appear. Follow the instructions on the screen. Tap the target
(+) with a stylus as it moves from the center to the four corners of the screen. Tap the center of the target with the stylus. Repeat as the target moves around the screen. Press the SFT+BKS key to cancel. If the system detects the touch too far from the target, the calibration must be done again from the beginning. When all the positions have been successfully tapped, the target ceases to be displayed and the following message appears: "Press the ENT key to accept the new setting". Press the ENT key to register the calibration data and terminate the function. Proceed to Date and Time Settings. Do not use an item with a sharp edge, such as a pencil or ballpoint pen, for tapping the screen, as this may damage or break the screen. Do not place the palm of your hand on the screen when tapping it. Copyright 2001 by Fujitsu-ICL Systems Inc. 9 of 47 TeamPad 500 Users Guide 2.32.32.32.3 Date and Time Settings Set the date and time and tap the OK button.
[1] Time zone Select your local time zone. Use the drop down list to display the possible choices and then select one.
[2] Calendar Switch the calendar to current year, month, and day. Use either the arrows next to the month and year to scroll to the desire month and year, or tap on the month or year to change them.
[3] Current time Set the time based on a 24-hour clock. After either selecting the hours, minutes or seconds, use the arrow keys or keyboard to change to the desire time.
[4] OK and Apply Button Register the date and time that you have set and proceed to Section 3.
[5] X button Cancel the date & time process and proceed to Section 3. Copyright 2001 by Fujitsu-ICL Systems Inc. 10 of 47 TeamPad 500 Users Guide 3 Application Setup and Configuration The Application Setup Menu is used to define the application environment and define system wide configuration settings, such as Suspend and Backlight timers. This Setup Menu is displayed automatically after the Touch Screen calibration and the Date/Time settings. The Setup Menu is only displayed if an application is loaded to start automatically or the re-install box has been tapped
(for details, see Section 5.3) after a memory loss. The following Setup Menu is presented to the user for the equipments configuration and software installation. 3.1 Setup Menu
[1] Configure the operating environment via the Control Panel. For details, refer to Section 3.2.
[2] Application Installation from a storage card. For details, refer to Section 3.3.
[3] TeamPad Configuration. For details, refer to Section 3.4.
[4] Application Backup and Restore. For details, refer to Section 3.5
[5] Registry Editor. For details, refer to Section 3.6
[6] TeamPad Explorer. For details, refer to Section 3.7.
[7] Running a program. For details, refer to Section 3.8
[8] Run the defined startup program (if any) in debug mode. For details refer to Section 3.9. Copyright 2001 by Fujitsu-ICL Systems Inc. 11 of 47 TeamPad 500 Users Guide 3.2 Control Panel To update the operating environment of the equipment, press the 1 key, from the "Setup Menu. The control panel will then open. The following settings may need to be updated.
[1] System Properties Specify if the RAM area (data storing memory and program running memory) is to be increased or decreased. For details, refer to Section 3.2.1
[2] Power management Automatic power off can be configured. For details, refer to Section 3.2.2
[3] Display Properties Automatic backlight can be configured. For details, refer to Section 3.2.3
[4] Date/time Properties The date and time can be updated. For details, refer to Section 3.2.4
[5] Input Panel Properties Change the Screen Pop-up keyboard size. For details, refer to Section 3.2.5.
[6] X Button Return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 12 of 47 TeamPad 500 Users Guide 3.2.1 System Properties RAM usage can be updated from the System Properties function. To activate this function, double tap the System icon on the control panel and tap the Memory tab.
[1] Memory area bar The data storage area and program area in memory (RAM), are isolated from each other by moving the bar. The bar can only be moved to the right of the default, reserving more of the RAM for program execution. While the bar will automatically grow to the right, as an application needs more memory, the bar will never automatically move to the left if more storage area is needed. The primary purpose of this function is to provide a method to guarantee a minimum amount of executable memory.
[2] OK Button Apply the new RAM area memory allocation and return to the Control Panel.
[3] X Button Cancel the RAM area memory allocation changes and return to the Control Panel. Important Do not update the memory area unnecessarily. Retain the default state. Otherwise, an application program may not be able to run. The memory area will return to the default state when data is erased in memory because of a dead battery. Copyright 2001 by Fujitsu-ICL Systems Inc. 13 of 47 TeamPad 500 Users Guide 3.2.2 Power Management Properties 3.2.2 3.2.2 3.2.2 The equipments automatic power off feature can be configured using the Power Properties function. These settings will affect the equipments battery life. To activate this function, double tap the Power management icon on the control panel and tap the Power Off tab.
[1] Idle time until activation of suspend mode when battery is used Specify a time for activating the automatic power OFF feature when the main battery is used and the AC power is not connected. It is set to three minutes at factory shipment.
[2] Enable suspend mode when an external power supply is used Specify whether automatic power OFF is to be executed when the AC adapter is connected or in the CIU or Vehicle Holder. By checking box, the automatic power OFF feature is activated. The automatic power OFF feature is disabled at factory shipment.
[3] Idle time until activation of suspend mode when an external power supply is used Specify the time until automatic power OFF when the AC adapter is connected and item
[2] is checked.
[4] OK Button Apply the new Power Management Settings and return to the Control Panel.
[5] X Button Cancel the Power Management changes and return to the Control Panel. Copyright 2001 by Fujitsu-ICL Systems Inc. 14 of 47 TeamPad 500 Users Guide 3.2.3 Display Properties 3.2.3 3.2.3 3.2.3 Controls the period of time before the backlight will be automatically turned off. These settings will affect the equipments battery life. To activate this function, double tap the Display icon on the control panel and tap the Backlight tab.
[1] Turn off the backlight automatically when a battery is used Specify whether the backlight is to be automatically turned off when the main battery is used (when the AC adapter is not connected). By pressing the !, the automatic backlight OFF feature is enabled. The feature is enabled at factory shipment and configured for 1 minute.
[2] Turn off the backlight automatically when an external power supply is used. Specify whether the automatic backlight OFF feature is to be activated when an AC adapter is connected or in the CIU or Vehicle Holder. By pressing the !, the automatic backlight OFF feature is enabled. It is enabled at factory shipment and configured for 10 minutes.
[3] OK Button Apply the new Backlight Settings and return to the Control Panel.
[4] X Button Cancel the Backlight Setting changes and return to the Control Panel. Copyright 2001 by Fujitsu-ICL Systems Inc. 15 of 47 TeamPad 500 Users Guide 3.2.4 Date and Time Properties Set the date and time for the equipment.
[1] Time zone Select your local time zone. Use the drop down list to display the possible choices and then select one.
[2] Calendar Switch the calendar to current year, month, and day. Use either the arrows next to the month and year to scroll to the desire month and year, or tap on the month or year to change them.
[3] Current time Set the time based on a 24-hour clock. After either selecting the hours, minutes or seconds, use the arrow keys or keyboard to change to the desire time.
[4] OK and Apply Button Register the date and time that you have set and proceed to Section 3.
[5] X button Cancel the date & time process and proceed to Section 3. Copyright 2001 by Fujitsu-ICL Systems Inc. 16 of 47 TeamPad 500 Users Guide 3.2.5 Screen Input Panel (SIP) Keyboard Size The Screen Input Panel (SIP) can be configured to have small keys or larger keys. To configure the keyboard size, double tap the Input Panel icon on the control panel and the following Screen will be displayed. Both keyboards require the use of a stylist.
[1] Options button Change the Screen Input Panel keyboard size. When tapped, the following window will be displayed.
[2] OK button Register the Input Panel Changes and return to the Control Panel.
[3] X button Cancel the Input Panel process and return to the Control Panel. Copyright 2001 by Fujitsu-ICL Systems Inc. 17 of 47 TeamPad 500 Users Guide
[1] Large keys Radio Button Change the Screen Input Panel keyboard size to Large Keys. When the SFT+F5 keys are pressed, the SIP will be displayed with the larger keys.
[2] Small keys Radio Button Change the Screen Input Panel keyboard size to Small Keys. When the SFT+F5 keys are pressed, the SIP will be displayed with the smaller keys.
[3] OK button Register the Input Panel Changes and return to the previous Window.
[4] X button Cancel the Input Panel process and return to the Previous Window. Copyright 2001 by Fujitsu-ICL Systems Inc. 18 of 47 TeamPad 500 Users Guide 3.3 Application Installation To install the application(s) on the equipment, press the 2 key from the Setup Menu and the following window opens. Select the Storage Card from which the software installation will occur. Select Storage Card1 if the application is to be loaded from a compact flash card located in the side of the unit. Select Storage Card2 if the application is to be loaded from a Type II flash card located in the top of the unit. For information regarding the CONFIG.HHT process, please refer to the TeamPad 500 Programmers Reference Guide.
[1] Next Button Continue the Application Installation process.
[2] Cancel Button Cancel the Application Installation Process. Return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 19 of 47 TeamPad 500 Users Guide As the CONFIG.HHT file is being processed, a status box is displayed. At completion a screen similar to the following will be displayed.
[1] Apply Button Finishes the Application Installation process, and returns to the Setup Menu. Important When installing an application program, its best to initialize the system to a known state. See Section 3.4.1 for more details. Copyright 2001 by Fujitsu-ICL Systems Inc. 20 of 47 TeamPad 500 Users Guide 3.4 TeamPad Configuration To update the TeamPad 500s configuration, press the 3 key at the Setup Menu. Available options are Initialize Settings, Defining Launcher Keys, Backup/Restore the Registry, or configure the equipments combination keystrokes. 3.4.1 Initialize Settings The Initialize Settings option allows the user to configure the equipment back to default settings or to Initialize only certain settings (Flash ROM or RAM). To access this function press the Initialize tab.
[1] Select Type Of Initialize Select Initialize all setting to initialize ROM and RAM. Select Initialize selected items to initialize only ROM or RAM. Once this is selected you will then be able to select either ROM or RAM.
[2] Initialize Button Continue the Initialize Process.
[3] OK button Return to the Setup Menu and do not process the Initialize.
[4] X button Return to the Setup Menu and do not process the Initialize. Copyright 2001 by Fujitsu-ICL Systems Inc. 21 of 47 The following display will appear if the Initialize was selected. TeamPad 500 Users Guide
[1] Yes Button Initialize to default settings. A progress bar will be displayed while the function is running and at completion, will return to the previous Window.
[2] No Button Cancel the Initialize Process. Return to the Previous Window. Copyright 2001 by Fujitsu-ICL Systems Inc. 22 of 47 TeamPad 500 Users Guide 3.4.2 Launcher Keys To assign Launcher keys press the Launcher Tab after selecting 3 for TeamPad Configuration from the Setup Menu. Each of the F1-F5 keys can be defined to have a special meaning. When the key is pressed, the application defined to the function key is started. The Launcher keys can be used to start additional functions without providing the end user access to the Task Bar.
[1] Edit Button Add or Modify a Launcher key. Go to the next Window.
[2] Delete Button Deletes an existing Launcher key definition.
[3] OK button Return to the Setup Menu.
[4] X button Return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 23 of 47 TeamPad 500 Users Guide
[1] Edit Window Enter the path name of the program you wish to start by either browsing to the program or the popup keyboard (SFT + F5).
[2] OK Button Accept the Launcher key definition. When complete return to the previous Window.
[3] Browse Button Browse the system to locate an application to assign to the selected launcher key
[4] Cancel Button Cancel the Launcher Edit key process. Return to the previous Window. Copyright 2001 by Fujitsu-ICL Systems Inc. 24 of 47 TeamPad 500 Users Guide 3.4.3 Registry Backup and Restore To Backup or Restore the Registry, press the Registry Tab after selecting 3 for TeamPad Configuration from the Setup Menu.
[1] Select BackUp or Restore box Continue the Backup or Restore Registry function. Continue to the next Window.
[2] OK button Return to the Setup Menu.
[3] X button Return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 25 of 47 TeamPad 500 Users Guide
[1] Backup or Restore Tab Select which process to perform.
[2] Browse Button Browse the system to locate destination of Backup or Restore File.
[3] OK Button Accept the Registry Backup or Restore file destination. When complete return to the previous Window.
[4] X button Return to the previous Window. Copyright 2001 by Fujitsu-ICL Systems Inc. 26 of 47 TeamPad 500 Users Guide 3.4.4 Combination Keys Equipment-specific functions, such as operations on sound volume/battery display, screen keyboard, Paper Feed, etc., can be performed via key combinations. To configure the allowed combination keys, press the Key Tab after selecting 3 TeamPad Configuration from the Setup Menu.
[1] Keyboard Check Boxes Specifies whether to perform an operation that is selected by pressing a combination of keys. By pressing the !, the operation specified by the keys can be executed. The following items can be specified.
- Task bar display control (SFT + 00 + BKS)
- Battery/Volume/Calibration display control (SFT + ENT/SYS)
- Screen keyboard display control (SYS + F5)
- Integrated Printer Paper Feed (SFT + F1)
[2] OK button Return to the Setup Menu.
[3] X button Return to the Setup Menu. Remember For details on operations when key combinations are pressed, refer to Section 4. Except for the task bar display, operations are set to enabled at factory shipment. Copyright 2001 by Fujitsu-ICL Systems Inc. 27 of 47 TeamPad 500 Users Guide 3.5 Application Backup and Restore The operating environment for a configured application program can be saved. By restoring a saved application environment, the equipment can be returned to the state in which the environment was last saved. Backup/Restore can also be used to move an application from one RAM Object Store based system to another (clone an application). To save or restore an application environment, press 4 at the Setup Menu. The following selection window will then open.
[1] Backup the Application radio button. Perform a Backup operation if the OK box is pressed.
[2] Restore the Application radio button Perform a Restore operation if the OK box is pressed.
[3] Browse button Locate another storage area, other than Storage Card 1 or 2.
[4] OK button Continue Backup or Restore Operation. Continue to next Window.
[5] Cancel button Return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 28 of 47 TeamPad 500 Users Guide As the Backup or Restore procedure is executing, a Status Bar is displayed. At completion, the following screen is displayed.
[1] OK button Return to the Setup Menu
[2] ENT Key Return to the Setup Menu. Remember On a restore operation, instead of returning to the Setup Menu, the equipment powers off. On the next power on, the application will restart. The application is restored to the settings from the last backup operation. Copyright 2001 by Fujitsu-ICL Systems Inc. 29 of 47 TeamPad 500 Users Guide 3.6 Registry Editor The TeamPad 500s registry can be viewed and or modified by selecting 5 from the Setup Menu. Registry keys can be added and saved to a file if desired. These Registry update files can be automatically loaded during the Install process. An individual registry update file must be created for each new key tree structure created. Use extreme caution since accidental changes to the Registry could cause unpredictable results.
[1] +
Used to expand the sub keys.
[2] X button Close the Registry Editor and return to the Setup Menu.
[3] File Dropdown Menu Proceed to the next Window. Copyright 2001 by Fujitsu-ICL Systems Inc. 30 of 47 TeamPad 500 Users Guide
[1] Export/Import Export or Import a Registry key.
[2] Create key/value Create a registry key or modify an existing registry value.
[3] Delete Delete a Registry key.
[4] Register or Un-register Register or Un-register a DLL to the system.
[5] Version Display the version number of the Registry Editor.
[6] Close Close the Registry Editor. Copyright 2001 by Fujitsu-ICL Systems Inc. 31 of 47 TeamPad 500 Users Guide 3.7 TeamPad Explorer The equipment contains a dedicated file manager called the TeamPad Explorer. This utility supports the following functions.
- Copying data in file units and folder units
- Deleting files and folders
- Creating new folders
- Displaying the available memory Use extreme caution since accidental changes made by the Explorer could cause unpredictable results. To start the TeamPad Explorer, press 5 at the Setup Menu. The following selection window will then open.
[1] Listing Folders and files are listed. Double-tap the folder name to display the folder list. Double tap a file (execution format file: extension EXE) to run the file. Copyright 2001 by Fujitsu-ICL Systems Inc. 32 of 47 TeamPad 500 Users Guide
[2] Command bar Operations can be performed using the command bar. File copy button:
Copies a selected file and folder in a specified list to the adjacent list. File delete button:
Deletes a selected file and folder in a specified list. Return button:
Displays the contents of a folder that is located one hierarchy level above a specified list. New folder creation button:
Creates a new folder in a specified list.
[3] File Dropdown Menu Proceed to the next Window.
[4] X button Close the TeamPad Explorer and return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 33 of 47 TeamPad 500 Users Guide
[1] Create Folder Creates a Sub Folder in the selected Pane.
[2] Delete Deletes a file in the selected Pane.
[3] Copy Copies a file in the selected Pane.
[4] Properties Displays the file properties of a selected file.
[5] Free Space Displays the available free space in the Object Store and Storage Card(s).
[6] Version Displays the Version of the TeamPad Explorer.
[7] Exit Exit TeamPad Explorer. Return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 34 of 47 TeamPad 500 Users Guide 3.8 Run a Program To Run a Program, press 7 at the Setup Menu. The following selection window will then open. You can drag the Screen by touching the display and moving in the direction you wish.
[1] Entry Box Enter the file name of the program to be run.
[2] Browse button Opens a file browser dialog box. A program name can be selected from the dialog box.
[3] OK button Run the program whose file name was entered.
[4] Cancel button Cancel the Run program selection. Return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 35 of 47 TeamPad 500 Users Guide 3.9 Debug Mode To enter Debug Mode, press 8 at the Setup Menu. The following selection window will then open. When in this mode, the Toolbar is active, so you can enter the Start Menu. When the debug mode is entered, if an auto start application is defined, it will be started and the Task Bar will be made accessible.
[1] Yes button Select this button to enter Debug Mode. Unit will restart. If a startup program is defined, that program will launch, otherwise equipment will go to the Windows CE desktop.
[2] No button Select this button to return to the Setup Menu. Copyright 2001 by Fujitsu-ICL Systems Inc. 36 of 47 4 Basic Operations TeamPad 500 Users Guide Basic Operations are available at all times unless access was disabled during configuration (See Section 3.4.4). These functions allow for operations such as turning on the Backlight, Checking the Main and Sub batteries, Adjusting the Sound and Touch Panel Calibration as well as the Alpha keyboard Pop-up. The following is a description of each of the available basic functions. 4.1 Turning on the backlight The screen backlight can be turned ON and OFF by holding the SFT key down and pressing the F2 key. 4.2 Battery Status The equipment has a main and sub battery which charge automatically when either an AC adapter is connected, or the unit is placed in a CIU or Vehicle Holder. To check the Battery Status, press and hold the SFT key down and then press the ENT/SYS key. The following Window will be displayed.
[1] Main Battery a. Status
- External: An AC adapter or Holder is connected.
- Normal: The battery is being used.
- Low : The main battery is low (25%) . It must be charged or replaced.
- Unknown: The operational state of the battery cannot be checked. b. Percentage of the battery power left Displayed as a percentage.
[2] Sub battery a. Status Copyright 2001 by Fujitsu-ICL Systems Inc. 37 of 47 TeamPad 500 Users Guide
- Normal : Sufficient for memory backup.
- Low : Remaining power insufficient for memory backup.
[3] X button Close the Battery Status Window. Important When the battery is very low on power, the LED just below the keyboard will start blinking red. A very short time after the LED starts blinking, the unit will automatically power off. The battery must be charged or replaced in this case. If the main battery is disconnected in a situation in which the sub battery is low on power, the data stored in the memory may be lost. If the sub battery must be replace, make sure the main battery has sufficient power to hold the state of the unit while the sub battery is replaced. Copyright 2001 by Fujitsu-ICL Systems Inc. 38 of 47 TeamPad 500 Users Guide 4.3 Adjusting the Sound Volume While holding the SFT key down, press the ENT/SYS key. The following Volume and Battery panel will be displayed. To adjust the Volume, press the 1 key. The sound volume can be adjusted to one of four levels. Tap the desired sound volume level. A sample sound will be emitted on the tap.
[1] OK button Register the Sound Volume. Return to the Battery Status Window. Copyright 2001 by Fujitsu-ICL Systems Inc. 39 of 47 TeamPad 500 Users Guide 4.4 Touch Panel Calibration After a period of time, you may experience that the Touch Panel seems too be drifting, ie the touch does not register correctly. If this is the case it will be necessary to re-calibrate the tapping position. While holding the SFT key down, press the ENT/SYS key. The following Volume and Battery panel will be displayed. Press 2 for the Touch Screen Calibration process to start. The following calibration screen will open. Follow the instructions on the screen. Tap the target (+) with a stylus as it moves from the center to the four corners of the screen. Tap the center of the target with the stylus. Repeat as the target moves around the screen. Press the SFT+BKS key to cancel. If the system detects the touch too far from the target, the calibration must be re-done from the beginning. When all the positions have been tapped, the target ceases to be displayed and the following message appears: "Press the ENT key to accept the new setting". Press the ENT key to register the calibration data and return to the Battery Status Window. Copyright 2001 by Fujitsu-ICL Systems Inc. 40 of 47 TeamPad 500 Users Guide 4.5 Alpha Keyboard Pop-up For entering characters that are not available on the keypad, use the Alpha-Keyboard popup. Hold down the SFT key and press the F5 key to open the screen keyboard. It will open in the lower portion of the LCD display. Tap the desired character. To close the screen keyboard, hold down the SFT key and press the F5 key. Copyright 2001 by Fujitsu-ICL Systems Inc. 41 of 47 TeamPad 500 Users Guide 4.6 Low Main Battery Warning When the Main Battery is at a low level, the following Window will be displayed to alert the user. When this panel is displayed, the equipment should be charged as soon as possible with an approved A/C adapter or a charging device such as a CIU. For more details, refer to the Programmers Reference Guide or to the Operators Guide for details on Main Battery replacement.
[1] X button Close the Low Main Battery Window. Important When the battery is very low on power, the LED just below the keyboard will start blinking red. A very short time after the LED starts blinking, the unit will automatically power off. The battery must be charged or replaced in this case. If the main battery is disconnected in a situation in which the sub battery is low on power, the data stored in the memory may be lost. If the sub battery must be replaced, make sure the main battery has sufficient power to hold the state of the unit while the sub battery is replaced. Copyright 2001 by Fujitsu-ICL Systems Inc. 42 of 47 TeamPad 500 Users Guide 4.7 Low Sub Battery Warning When the Sub Battery is at a low level, the following Window will be displayed to alert the user. Unless the Main battery has been removed for an extended period of time or the unit has been out of service for an extended period of time, the health of the sub battery should be questioned. If the Main battery has been removed for an extended period of time or the unit has been out of service for an extended period of time, then fully charge the Main battery and the Sub battery will slowly recharge. If the unit has been in constant operations, then the Sub battery should be checked to see if it is disconnected and if not it should be replaced.
[1] X button Close the Low Sub Battery Window Important When the battery is very low on power, the LED just below the keyboard will start blinking red. A very short time after the LED starts blinking, the unit will automatically power off. The battery must be charged or replaced in this case. If the main battery is disconnected in a situation in which the sub battery is low on power, the data stored in the memory may be lost. If the sub battery must be replaced, make sure the main battery has sufficient power to hold the state of the unit while the sub battery is replaced. Copyright 2001 by Fujitsu-ICL Systems Inc. 43 of 47 TeamPad 500 Users Guide 5 Restoring the Application When data is lost from memory (RAM) because of a low battery situation, the application operating environment can be automatically restored. This function is only relevant for files that are installed using the Application Setup Menu (for details, see Section 3). Note that files that were copied to their location via Explorer are not restored. The state of the unit is returned to that at Install time. The Restore process starts up automatically when data is erased in memory because of a dead battery. When the unit is restarted/powered on, the following Window will be displayed. To begin the restore procedure: Hold down the ENT/SYS key, then press the 1 Key to start the Touch Panel calibration. To stop the restore procedure: Turn off the power by pressing the power key. Copyright 2001 by Fujitsu-ICL Systems Inc. 44 of 47 TeamPad 500 Users Guide 5.15.15.15.1 Touch Panel Calibration The following calibration screen will open. Follow the instructions on the screen. Tap the target
(+) with a stylus as it moves from the center to the four corners of the screen. Tap the center of the target with the stylus. Repeat as the target moves around the screen. Press the SFT+BKS key to cancel. If the System detects the touch too far from the target, the calibration must be done again from the beginning. When all the positions have been tapped, the target ceases to be displayed and the following message appears: "Press the ENT key to accept the new setting". Press the ENT key to register the calibration data and terminate the function. Proceed to Date and Time Settings. Do not use an item with a sharp edge, such as a pencil or ballpoint pen, for tapping the screen, as this may damage or break the screen. Do not place the palm of your hand on the screen when tapping it. Copyright 2001 by Fujitsu-ICL Systems Inc. 45 of 47 TeamPad 500 Users Guide 5.25.25.25.2 Date and Time Settings When turning on power for the first time, the date and time must be set. Set the date and time and tap the OK button.
[1] Time zone Select your local time zone. Use the drop down list to display the possible choices and then select one.
[2] Calendar Switch the calendar to current year, month, and day. Use either the arrows next to the month and year to scroll to the desire month and year, or tap on the month or year to change them.
[3] Current time Set the time based on a 24-hour clock. After either selecting the hours, minutes or seconds, use the arrow keys or keyboard to change to the desire time.
[4] OK and Apply Button Register the date and time that you have set and proceed to Section 3.
[5] X button Cancel the date & time process and proceed to Section 3. Copyright 2001 by Fujitsu-ICL Systems Inc. 46 of 47 TeamPad 500 Users Guide 5.3 Restore/Re-Initialize the Application The user will have a choice to restore (Recover) the application from a Storage Card or re-install the application from scratch.
[1] Restore the Application When restore is complete, an end-of-operation message is displayed and the equipment will re-start and run the configured Startup Program.
[2] Re-install the Application When restore is complete, an end-of-operation message is displayed and the equipment will re-start and run the Setup Menu and Configuration procedure. For details, see Section 3. Copyright 2001 by Fujitsu-ICL Systems Inc. 47 of 47
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2001-10-18 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Class II permissive change or modification of presently authorized equipment |
| 2 | 2001-09-01 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | |
| 3 | 2001-08-10 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | |
| 4 | 2001-08-08 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | |
| 5 | 2001-06-12 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | |
| 6 | 2001-04-09 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | |
| 7 | 2001-03-06 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | |
| 8 | 2000-10-27 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 3 4 5 6 7 8 | Effective |
2001-10-18
|
||||
| 1 2 3 4 5 6 7 8 |
2001-09-01
|
|||||
| 1 2 3 4 5 6 7 8 |
2001-08-10
|
|||||
| 1 2 3 4 5 6 7 8 |
2001-08-08
|
|||||
| 1 2 3 4 5 6 7 8 |
2001-06-12
|
|||||
| 1 2 3 4 5 6 7 8 |
2001-04-09
|
|||||
| 1 2 3 4 5 6 7 8 |
2001-03-06
|
|||||
| 1 2 3 4 5 6 7 8 |
2000-10-27
|
|||||
| 1 2 3 4 5 6 7 8 | Applicant's complete, legal business name |
Cisco Systems Inc
|
||||
| 1 2 3 4 5 6 7 8 | FCC Registration Number (FRN) |
0004968939
|
||||
| 1 2 3 4 5 6 7 8 | Physical Address |
125 West Tasman Drive
|
||||
| 1 2 3 4 5 6 7 8 |
San Jose, California 95134-1706
|
|||||
| 1 2 3 4 5 6 7 8 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 2 3 4 5 6 7 8 | TCB Application Email Address |
h******@americanTCB.com
|
||||
| 1 2 3 4 5 6 7 8 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 2 3 4 5 6 7 8 | Grantee Code |
LDK
|
||||
| 1 2 3 4 5 6 7 8 | Equipment Product Code |
102040
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 3 4 5 6 7 8 | Name |
G**** T******
|
||||
| 1 2 3 4 5 6 7 8 | Title |
Manager, Engineering
|
||||
| 1 2 3 4 5 6 7 8 | Telephone Number |
408-5********
|
||||
| 1 2 3 4 5 6 7 8 | Fax Number |
408-5********
|
||||
| 1 2 3 4 5 6 7 8 |
g******@cisco.com
|
|||||
| app s | Technical Contact | |||||
| 1 2 3 4 5 6 7 8 | Firm Name |
Rhein Tech Laboratories, Inc.
|
||||
| 1 2 3 4 5 6 7 8 |
Rhein Tech Laboratories
|
|||||
| 1 2 3 4 5 6 7 8 |
Rhein Tech Laboratories Inc.
|
|||||
| 1 2 3 4 5 6 7 8 |
LXE, Inc
|
|||||
| 1 2 3 4 5 6 7 8 |
M. Flom Associates, Inc
|
|||||
| 1 2 3 4 5 6 7 8 |
M. Flom Associates, Inc.
|
|||||
| 1 2 3 4 5 6 7 8 | Name |
D****** A****** F****
|
||||
| 1 2 3 4 5 6 7 8 |
R******** S********
|
|||||
| 1 2 3 4 5 6 7 8 |
D******** F********
|
|||||
| 1 2 3 4 5 6 7 8 |
B****** C******
|
|||||
| 1 2 3 4 5 6 7 8 |
S**** W********
|
|||||
| 1 2 3 4 5 6 7 8 |
M******** F****
|
|||||
| 1 2 3 4 5 6 7 8 | Physical Address |
360 Herndon Parkway
|
||||
| 1 2 3 4 5 6 7 8 |
125 Technology Parkway
|
|||||
| 1 2 3 4 5 6 7 8 |
3356 N. San Marcos Pl., Suite 107
|
|||||
| 1 2 3 4 5 6 7 8 |
Herndon
|
|||||
| 1 2 3 4 5 6 7 8 |
Norcross
|
|||||
| 1 2 3 4 5 6 7 8 |
Chandler
|
|||||
| 1 2 3 4 5 6 7 8 |
Herndon, Virginia 20170
|
|||||
| 1 2 3 4 5 6 7 8 |
Norcross, Georgia 30092-2913
|
|||||
| 1 2 3 4 5 6 7 8 |
Chandler, Arizona 85225-7176
|
|||||
| 1 2 3 4 5 6 7 8 |
United States
|
|||||
| 1 2 3 4 5 6 7 8 | Telephone Number |
703-6******** Extension:
|
||||
| 1 2 3 4 5 6 7 8 |
703 6********
|
|||||
| 1 2 3 4 5 6 7 8 |
703-6******** Extension:
|
|||||
| 1 2 3 4 5 6 7 8 |
(770)******** Extension:
|
|||||
| 1 2 3 4 5 6 7 8 |
480 9********
|
|||||
| 1 2 3 4 5 6 7 8 | Fax Number |
703-6********
|
||||
| 1 2 3 4 5 6 7 8 |
703 6********
|
|||||
| 1 2 3 4 5 6 7 8 |
(770)********
|
|||||
| 1 2 3 4 5 6 7 8 |
480 9********
|
|||||
| 1 2 3 4 5 6 7 8 |
f******@rheintech.com
|
|||||
| 1 2 3 4 5 6 7 8 |
r******@rheintech.com
|
|||||
| 1 2 3 4 5 6 7 8 |
d******@rheintech.com
|
|||||
| 1 2 3 4 5 6 7 8 |
w******@ems-t.com
|
|||||
| 1 2 3 4 5 6 7 8 |
g******@mflom.com
|
|||||
| app s | Non Technical Contact | |||||
| 1 2 3 4 5 6 7 8 | Firm Name |
Rhein Tech Laboratories
|
||||
| 1 2 3 4 5 6 7 8 |
Rhein Tech Laboratories, Inc.
|
|||||
| 1 2 3 4 5 6 7 8 |
LXE, Inc.
|
|||||
| 1 2 3 4 5 6 7 8 |
M. Flom Associates, Inc.
|
|||||
| 1 2 3 4 5 6 7 8 | Name |
M******** C******
|
||||
| 1 2 3 4 5 6 7 8 |
E******** B******
|
|||||
| 1 2 3 4 5 6 7 8 |
M******** F********
|
|||||
| 1 2 3 4 5 6 7 8 | Physical Address |
360 Herndon Parkway
|
||||
| 1 2 3 4 5 6 7 8 |
125 Technology Parkway
|
|||||
| 1 2 3 4 5 6 7 8 |
3356 N. San Marcos Pl., Suite 107
|
|||||
| 1 2 3 4 5 6 7 8 |
Herndon
|
|||||
| 1 2 3 4 5 6 7 8 |
Norcross
|
|||||
| 1 2 3 4 5 6 7 8 |
Chandler
|
|||||
| 1 2 3 4 5 6 7 8 |
Herndon, Virginia 20170
|
|||||
| 1 2 3 4 5 6 7 8 |
Norcross, Georgia 30092-2913
|
|||||
| 1 2 3 4 5 6 7 8 |
Chandler, Arizona 85225-7176
|
|||||
| 1 2 3 4 5 6 7 8 |
United States
|
|||||
| 1 2 3 4 5 6 7 8 | Telephone Number |
703-6******** Extension:
|
||||
| 1 2 3 4 5 6 7 8 |
(770)******** Extension:
|
|||||
| 1 2 3 4 5 6 7 8 |
480 9********
|
|||||
| 1 2 3 4 5 6 7 8 | Fax Number |
703-6********
|
||||
| 1 2 3 4 5 6 7 8 |
(770)********
|
|||||
| 1 2 3 4 5 6 7 8 |
480 9********
|
|||||
| 1 2 3 4 5 6 7 8 |
f******@rheintech.com
|
|||||
| 1 2 3 4 5 6 7 8 |
b******@ems-t.com
|
|||||
| 1 2 3 4 5 6 7 8 |
g******@mflom.com
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 3 4 5 6 7 8 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| 1 2 3 4 5 6 7 8 | Yes | |||||
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 3 4 5 6 7 8 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 3 4 5 6 7 8 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AIRLMC350 | ||||
| 1 2 3 4 5 6 7 8 | Additional High Gain Antenna | |||||
| 1 2 3 4 5 6 7 8 | Hand Held Wireless Display Terminal | |||||
| 1 2 3 4 5 6 7 8 | Hand Held Computer with Printer | |||||
| 1 2 3 4 5 6 7 8 | Wireless LAN Card | |||||
| 1 2 3 4 5 6 7 8 | Wireless Lan Adapter (unlicensed) PCMCIA | |||||
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Single Modular Approval | ||||
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
| 1 2 3 4 5 6 7 8 | Original Equipment | |||||
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 3 4 5 6 7 8 | Grant Comments | Permissive Change to authorize additional 3 dBi, 5dBi external antennas; change in molded-in antenna, and cradle. | ||||
| 1 2 3 4 5 6 7 8 | Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
| 1 2 3 4 5 6 7 8 | Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
| 1 2 3 4 5 6 7 8 | Modular Approval | |||||
| 1 2 3 4 5 6 7 8 | The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
| 1 2 3 4 5 6 7 8 | This application was originally granted on 10/13/2000. | |||||
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 3 4 5 6 7 8 | Firm Name |
Rhein Tech Laboratories, Inc.
|
||||
| 1 2 3 4 5 6 7 8 |
LXE Inc.
|
|||||
| 1 2 3 4 5 6 7 8 |
M. Flom Associates, Inc.
|
|||||
| 1 2 3 4 5 6 7 8 | Name |
R**** M****
|
||||
| 1 2 3 4 5 6 7 8 |
C******** B****
|
|||||
| 1 2 3 4 5 6 7 8 |
M****** F****
|
|||||
| 1 2 3 4 5 6 7 8 | Telephone Number |
703-6********
|
||||
| 1 2 3 4 5 6 7 8 |
770-4******** Extension:
|
|||||
| 1 2 3 4 5 6 7 8 |
480-9********
|
|||||
| 1 2 3 4 5 6 7 8 | Fax Number |
703-6********
|
||||
| 1 2 3 4 5 6 7 8 |
770-4********
|
|||||
| 1 2 3 4 5 6 7 8 |
480-9********
|
|||||
| 1 2 3 4 5 6 7 8 |
F******@rheintech.com
|
|||||
| 1 2 3 4 5 6 7 8 |
b******@ems-t.com
|
|||||
| 1 2 3 4 5 6 7 8 |
i******@mflom.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0380000 | ||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1000000 | ||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 3 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1000000 | ||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 4 | 1 | 15C | 36 | 2412.00000000 | 2462.00000000 | 0.0340000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 5 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1000000 | ||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 6 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1000000 | ||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 7 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1000000 | ||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 8 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1000000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC