Ripwave Base Station Installation & Commissioning Guide Part Number 40-00047-00 Revision H, Version 1.0 February 4, 2005 All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved. Proprietary Navini Networks, Inc. Ripwave Base Station I&C Guide About This Document Purpose This document provides a Navini-certified Installation & Commissioning Technician or Field Engineer with instructions to properly install the Base Transceiver Station (BTS), Radio Frequency Subsystem (RFS), and cabling; and to test and commission the Base Station after installation. Revision History Date Revision/
Version 1.31.05 H/1.0 2.4.05 H/1.0 Authors L. Font L. Font Editors Comments S. Redfoot Commercial Release 4.1.6 S. Redfoot Custom Version for Testing Contacts Contact Navini Networks Technical Support during normal business hours: Monday through Friday 8:30 a.m. to 5:30 p.m. Central Time. You can also submit questions or comments by web or email at any time. Corporate Headquarters:
Technical Support:
Offshore Number:
Local Dallas Number:
Web Address:
E-mail:
Navini Networks, Inc. 2240 Campbell Creek Blvd. Suite 110 Richardson, Texas 75082 USA
(972) 852-4200. 1-866-RIPWAVE 001 (972) 852-4389
(972) 852-4389 www.navini.com / select Support techsupport@navini.com 2 Navini Networks, Inc. Ripwave Base Station I&C Guide Permissions, Trademarks & Distribution Copyright 2005, Navini Networks, Inc. All information contained herein and disclosed by this document is the proprietary property of Navini Networks, Inc. and all rights therein are expressly reserved. Acceptance of this material signifies agreement by the recipient that the information contained in this document is confidential and that it will be used solely for the purposes set forth herein. Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems without the express written permission of Navini Networks, Inc. Navini Networks, Internet at the Speed of Thought, zero-install, unwired by Navini, the Navini Networks logo, and Ripwave are trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be trademarks and/or service marks of their respective owners. Nothing herein constitutes any representation, warranty, assurance, or guaranty of any kind. Because of continuing developments and improvements in design, manufacturing, and deployment, material in this document is subject to change without notification and does not represent any commitment or obligation on the part of Navini Networks, Inc. Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this document. Any unauthorized usage is strictly prohibited without the express written permission of Navini Networks, Inc. Copyright 2005 Navini Networks, Inc. All Rights Reserved. Navini Networks, Inc. 2240 Campbell Creek Boulevard Suite 110 Richardson, Texas 75082 USA 3 Navini Networks, Inc. Ripwave Base Station I&C Guide Table of Contents CHAPTER 1: OVERVIEW......................................................................ERROR! BOOKMARK NOT DEFINED. RIPWAVE DESCRIPTION .....................................................................................ERROR! BOOKMARK NOT DEFINED. PROCEDURAL DOCUMENTS & FORMS ...............................................................ERROR! BOOKMARK NOT DEFINED. HIGH-LEVEL I&C PROCESS ...............................................................................ERROR! BOOKMARK NOT DEFINED. BASE STATION COMPONENTS............................................................................ERROR! BOOKMARK NOT DEFINED. TECHNICAL SPECIFICATIONS .............................................................................ERROR! BOOKMARK NOT DEFINED. BTS INPUT/OUTPUT SPECIFICATIONS................................................................ERROR! BOOKMARK NOT DEFINED. CHAPTER 2: INSTALLATION..............................................................ERROR! BOOKMARK NOT DEFINED. PRE-INSTALLATION............................................................................................ERROR! BOOKMARK NOT DEFINED. INSTALL POWER & GROUNDING........................................................................ERROR! BOOKMARK NOT DEFINED. INSTALL CABLES ...............................................................................................ERROR! BOOKMARK NOT DEFINED. INSTALL THE BTS..............................................................................................ERROR! BOOKMARK NOT DEFINED. INSTALL GPS ANTENNAS..................................................................................ERROR! BOOKMARK NOT DEFINED. INSTALL THE RFS..............................................................................................ERROR! BOOKMARK NOT DEFINED. VERIFY INSTALLED CIRCUIT CARDS..................................................................ERROR! BOOKMARK NOT DEFINED. BASE STATION INSTALLATION CERTIFICATION .................................................ERROR! BOOKMARK NOT DEFINED. CHAPTER 3: COMMISSIONING..........................................................ERROR! BOOKMARK NOT DEFINED. REVIEW CUSTOMER NETWORK PLANS ..............................................................ERROR! BOOKMARK NOT DEFINED. INSTALL EMS SERVER ......................................................................................ERROR! BOOKMARK NOT DEFINED. VERIFY CABLE CONNECTIONS...........................................................................ERROR! BOOKMARK NOT DEFINED. CONFIGURE & POWER UP THE BTS...................................................................ERROR! BOOKMARK NOT DEFINED. CALIBRATE THE BASE STATION.........................................................................ERROR! BOOKMARK NOT DEFINED. EXPORT BTS DATA...........................................................................................ERROR! BOOKMARK NOT DEFINED. PERFORM THE CALIBRATION VERIFICATION PROCEDURE .................................ERROR! BOOKMARK NOT DEFINED. SINGLE ANTENNA ELEMENT TEST.....................................................................ERROR! BOOKMARK NOT DEFINED. INSTALL & TEST CUSTOMER EMS OPERATIONS...............................................ERROR! BOOKMARK NOT DEFINED. PERFORM CALIBRATION USING CUSTOMERS EMS ..........................................ERROR! BOOKMARK NOT DEFINED. VERIFY SYSTEM PERFORMANCE........................................................................ERROR! BOOKMARK NOT DEFINED. VERIFY SYSTEM OPERATION WITH MULTIPLE MODEMS...................................ERROR! BOOKMARK NOT DEFINED. BACK UP EMS DATABASE................................................................................ERROR! BOOKMARK NOT DEFINED. CUSTOMER ACCEPTANCE ..................................................................................ERROR! BOOKMARK NOT DEFINED. APPENDIX C: BTS SPECIFICATIONS................................................ERROR! BOOKMARK NOT DEFINED. APPENDIX G: SAMPLE BASE STATION DRAWING ......................ERROR! BOOKMARK NOT DEFINED. APPENDIX H: ANTENNA POWER & CABLE SELECTION ...........ERROR! BOOKMARK NOT DEFINED. APPENDIX I: SAMPLE BILL OF MATERIALS (BOM)....................ERROR! BOOKMARK NOT DEFINED. APPENDIX K: RFS SYSTEM TEST (CABLE & RFS SWEEP) .........ERROR! BOOKMARK NOT DEFINED. APPENDIX O: BASE STATION INSTALLATION CERTIFICATION...............ERROR! BOOKMARK NOT DEFINED. APPENDIX S: LOCATION (FTP) TESTS.............................................ERROR! BOOKMARK NOT DEFINED. APPENDIX V: IC CLOSEOUT TOOL ..................................................ERROR! BOOKMARK NOT DEFINED. 4 Navini Networks, Inc. Ripwave Base Station I&C Guide Safety To optimize safety and expedite installation and service, read this document thoroughly. Follow all warnings, cautions, and instructions marked on the equipment and included in this document. To aid in the prevention of injury and damage to property, cautionary symbols have been placed in this document to alert the reader to known potentially hazardous situations, or hazards to equipment or procedures. The symbols are placed before the information to which they apply. However, any situation that involves heavy equipment and electricity can become hazardous, and caution and safety should be practiced at all times when installing, servicing, or operating the equipment. Caution Symbol - possible equipment or property damage Warning Symbol - could cause personal injury or otherwise be hazardous to your health Navini Networks, Inc., expressly requires that when using Navini electronic equipment always follow the basic safety precautions to reduce the risk of electrical shock, fire, and injury to people and/or property. 1. Follow all warnings and instructions that come with the equipment. 2. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the equipment to water could cause severe electrical shock or serious damage to the equipment. 3. Do not allow any type of liquid to come in contact with the equipment. Unplug the equipment from the power source before cleaning. Use a damp cloth for cleaning. Do not use any soaps or liquid cleaners. 4. Follow all airport and FAA regulations when using the equipment on or near aircraft. 5. Only operate the equipment from the type of power source(s) indicated in this manual
(110/220 VAC, 60/50 Hz or Navini supplied battery). Any other type of input power source may cause damage to the equipment. 6. Power the equipment using only the battery or the AC adapter cable provided, and in accordance with the instructions specified in the User Guide. 7. Do not use a frayed or damaged power cord. Do not place the power cord where it can be 8. Do not touch wires where the insulation is frayed or worn unless the equipment has been 9. Do not overload wall outlets, power strips, or extension cords. This can cause serious stepped on or tripped over. disconnected from its power source. electrical shock or fire. 10. Do not place the equipment on an unstable surface. It can fall and cause injury or damage to 5 Navini Networks, Inc. Ripwave Base Station I&C Guide the equipment. 11. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and also voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Only an authorized repair technician should service this product. 12. Do not expose the equipment to extreme hot or cold temperatures. 13. Do not use the equipment under the following conditions:
When the equipment has been exposed to water or moisture. When the equipment has been damaged. When the power cord is damaged or frayed. When the equipment does not operate properly or shows a distinct change in performance. 6 Navini Networks, Inc. Ripwave Base Station I&C Guide Regulatory & Safety Information Safety Notice WARNING! This device is a Radio Frequency transmitter. A minimum separation distance of 2 meters or more must be maintained between the antenna and all persons during device operations to ensure safe operation. If this minimum distance cannot be maintained, exposure to RF levels that exceed safety limits may result. FCC Notice WARNING! This device is a Radio Frequency transmitter. It is required to comply with FCC RF exposure requirements for transmitting devices. A minimum separation distance of 2 meters or more must be maintained between the antenna and all persons during device operations to ensure compliance with the FCCs rules for Radio Frequency Exposure. If this minimum distance cannot be maintained, exposure to RF levels that exceed the FCCs limits may result. INFORMATION TO USER This device has been authorized as a radio frequency transmitter under the appropriate rules of the Federal Communications Commission. Any changes or modifications not expressly approved by Navini Networks could void the users authority to operate the equipment. UL & NEC/CEC Regulations 1. The Ripwave BTS must be installed in accordance with NEC/CEC Articles 800/810/830. 2. As a minimum, all DC power leads and bonding/grounding straps shall be 6 AWG copper conductors. 3. GPS, RF, and power/data cables in excess of 140 feet in length must have protective devices installed that are UL listed to UL 492, UL497A or UL497B, UL497C, and UL1449. 4. Lightning protection is recommended. If used, the lightning protection devices must comply with UL497. output. 5. Power supplies should be UL listed to UL60950 or UL60950-1 and have earthed SELV 6. Ethernet connections require a UL497B listed protection device to be installed between the BTS and the first network device. T1 connections must be routed from the BTS through a UL497 listed protection device at the demarcation point. 7. T1/E1 interconnect cables between the BTS and demarcation point must be a minimum of #26 AWG wire, in accordance with NEC/CEC standards. 8. All power and ground conductors must be mechanically supported to avoid strain of the 7 Navini Networks, Inc. Ripwave Base Station I&C Guide wires and connection points. 9. A UL listed disconnect device, such as a circuit breaker or fuse, must be installed between the power supply and BTS chassis connections. 10. Power-interconnect wires between the power supply/recitifier and the BTS Digital chassis must have heat shrink tubing applied over the barrel of the terminal lugs after crimping the wire. A picture is provided in the Installation section of this manual. 11. If it is necessary to replace a fuse on a CHP, CC or PA board, a fuse of the same type and with the same rating must be used to insure continued protection against risk of fire. EU Alert Mark
0470 Undertegnede Navini Networks erklrer herved, at flgende udstyr 2.4 GHz BTS overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hierbij verklaart Navini Networks dat het toestel 2.4 GHz BTS in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hereby, Navini Networks declares that the 2.4 GHz BTS is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Hiermit erklrt Navini Networks dass sich dieser/diese/dieses 2.4 GHz BTS in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Navini Networks 2.4 GHz BTS 1999/5/. Navini Networks vakuuttaa tten ett 2.4 GHz BTS tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Par la prsente, Navini Networks dclare que ce 2.4 GHz BTS est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables. Con la presente Navini Networks dichiara che questa 2.4 GHz BTS conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Navini Networks declara que la 2.4 GHz BTS est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Por medio de la presente Navini Networks declara que la 2.4 GHz BTS cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Hrmed intygar Navini Networks att denna 2.4 GHz BTS str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Danish Dutch English German Greek Finnish French Italian Portuguese Spanish Swedish EU Restrictions
(English) Austria: Plug-in radio devices should be used only with the host equipment and external antennas specified by the manufacturer. 8 Navini Networks, Inc. Ripwave Base Station I&C Guide France: Use of this equipment is limited to the 2446.5-2483.5 MHz band, with some geographical constraints and the EIRP limited to -20dBW/MHz. Indoor: EIRP limited to 10 mW in the 2400-2446 MHz band. Inside a private area: EIRP limited to 100 mW in the 2446-2483.5 MHz band, with authorization. Outside a private area: the band is not opened. Belgium: EIRP limited to 10 mW. Hungary: Processing gain: 10 dB minimum. Antenna type: integral or external with maximum gain of 6 dBi. Italy: No restrictions if used outside own premises; a general authorization is required. Luxembourg: No restrictions. System provider for third party traffic may require a Telecommunications Act License The Netherlands: No license required indoor or outdoor for EIRP up to 10 mW. No license required indoor only for EIRP up to 100 mW. License required outdoor for EIRP up to 100 mW within 24512471 MHz. Current use of this band by the Government should be protected. United Kingdom: A system provider for third party traffic may require a Wireless Telegraphy and/or Telecommunications Act License
(Espaol) Austria: Los dispositivos de radio enchufables deben ser conectados nicamente con el equipo y las antenas externas declarados por el fabricante. Francia: Limitado a la banda de 2446,5-2483,5 MHz, con EIRP no mayor que 20 dBW/MHz, y con algunas restricciones geogrficas. En interiores el EIRP debe limitarse a 10 mW en la banda de 2400-2446 MHz. Dentro de reas privadas el EIRP debe limitarse a 100 mW en la banda de 2446-2483,5 MHz, con autorizacin. Fuera de las reas privadas la banda no esta abierta. Blgica: El EIRP est limitado a 10 mW. Hungra: Se requiere una ganancia de procesamiento de al menos 10 dB y una antena de tipo integral o exterior con una ganancia mxima de 6 dBi. Italia: No existe ninguna restriccin si se utiliza fuera de propias premisas, pero se requiere una autorizacin general. Luxemburgo: No existe ninguna restriccin, pero un proveedor de servicios de sistema para trfico de terceros puede requerir una licencia en conformidad con el Acta de Telecomunicaciones 9 Navini Networks, Inc. Ripwave Base Station I&C Guide Pases Bajos: No se requiere licencia para operar a 10 mW en interior o exterior. No se requiere licencia para operar a 100 mW en interiores solamente. Se requiere una licencia para operar a 100 mW en la banda de 2451-2471 MHz en el exterior. Debe protegerse el uso actual de esta banda por parte del gobierno. Reino Unido: Un proveedor de servicios de sistema para trafico de terceros podra requerir una Licencia de Telegrafa Inalmbrica y/o un permiso en conformidad con el Acta de Telecomunicaciones.
(Franais) Autriche: Les dispositifs de radio doivent tre branchs uniquement sur l'quipement et les antennes externes spcifis par le fabricant. France: Limit la bande des 2446,5-2483,5 MHz avec certaines restrictions gographiques et le EIRP limit -20dBW/MHz. lintrieur: EIRP limit 10 mW dans la bande des 2400-
2446 MHz. linterieur, dune zone prive: EIRP limit 100 mW dans la bande des 2446-
2483,5 MHz, avec autorisation. lextrieur dune zone prive: la bande n'est pas ouverte. Belgique: Le EIRP est limit 10 mW. Hongrie: Le gain de traitement doit tre dau moins 10 dB, et lantenne doit tre de type intgral ou extrieure avec un gain maximum de 6 dBi. Italie: Il n-y a aucune restriction sil est utilis en dehors de propres locaux, mais une autorisation gnrale est exige. Luxembourg: Il ny a aucune restriction, mais un fournisseur de services de systme pour le trafic de tiers peut tre demand davoir un permis en conformit avec la Loi des Tlcommunications. Pays-Bas: Aucun permis nest pas ncessaire pour oprer 10 mW lintrieur ou lextrieur. Aucun permis nest pas ncessaire pour oprer 100 mW lintrieur seulement. Il faut avoir un permis pour oprer 100 mW dans la bande des 2451-2471MHz lextrieur. Il faut protger lutilisation actuelle de la bande par le gouvernement. Royaume Uni: Un fournisseur de services de systme pour le trafic de tiers peut tre demand davoir un permis de Tlgraphie sans fil et/ou un permis en conformit avec la Loi des Tlcommunications. 10 Navini Networks, Inc. Ripwave Base Station I&C Guide Battery Caution & Procedures WARNING! To reduce risk of injury or fire, follow these instructions when handling the battery. 1. Risk of explosion is possible if the battery is replaced with one not supplied by Navini Networks. battery disposal guidelines. 2. Do not dispose of the battery in a fire. It may explode. Check with the local codes for 3. Do not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or harmful to humans. If battery substances come in contact with the skin, seek medical help immediately. 4. Do not attempt to recharge the battery by any means except per the instructions in this manual. 5. Remove the battery from the equipment if the equipment is not going to be used for a long period of time. The battery could leak and cause damage to the equipment. 6. Exercise care when handling the battery to prevent shorting the battery with conducting materials such as bracelets, rings, and keys. 7. Store the battery pack in a dry place, 0 to +40 degrees Celsius. 8. Dispose of used batteries according to environmental guidelines. 11