all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual 1 | Users Manual | 2.19 MiB | ||||
1 |
|
Manual 2 | Users Manual | 261.08 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | RF Exposure Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report |
1 | Manual 1 | Users Manual | 2.19 MiB |
Ripwave Base Station User Manual Part Number 40-00197-00 Revision C (1.20), Version 1.0 September 26, 2003 All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved. Proprietary Base Station User Manual Navini Networks, Inc. About This Document Purpose This manual provides an overview for the Navini Networks Base Station. Topics included are installation of the Base Transceiver Station (BTS), Radio Frequency Subsystem (RFS), and cabling; and testing and commissioning the Base Station. Revision History Author Editor Comments Revision /
Version A / 1.0 Date Sept 17, 2003 Sept 18, 2003 Sept 26, 2003 P. Prudhomme S. Redfoot Release of Base Station user manual for FCC submission. B / 1.0 C / 1.0 P. Prudhomme S. Redfoot Edit specifications. P. Prudhomme S. Redfoot Add output power information Contacts Contact Navini Networks Technical Support during normal business hours: Monday through Friday 8:30 a.m. to 5:30 p.m. Central Time. You can also submit questions or comments by web or email at any time. Corporate Headquarters:
Technical Support:
Web Address:
E-mail:
Navini Networks, Inc. 2240 Campbell Creek Blvd. Suite 110 Richardson, Texas 75082 USA
(972) 852-4200 1-866-RIPWAVE www.navini.com / select Technical Support techsupport@navini.com 2 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Permissions, Trademarks & Distribution Copyright September 2003, Navini Networks, Inc. All information contained herein and disclosed by this document is the proprietary property of Navini Networks, Inc. and all rights therein are expressly reserved. Acceptance of this material signifies agreement by the recipient that the information contained in this document is confidential and that it will be used solely for the purposes set forth herein. Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems without the express written permission of Navini Networks, Inc. Navini Networks, Internet at the Speed of Thought, zero-install, unwired by Navini, the Navini Networks logo, and Ripwave are trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be trademarks and/or service marks of their respective owners. Nothing herein constitutes any representation, warranty, assurance, or guaranty of any kind. Because of continuing developments and improvements in design, manufacturing, and deployment, material in this document is subject to change without notification and does not represent any commitment or obligation on the part of Navini Networks, Inc. Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this document. Any unauthorized usage is strictly prohibited without the express written permission of Navini Networks, Inc. Copyright 2003 Navini Networks, Inc. All rights reserved. Navini Networks, Inc. 2240 Campbell Creek Boulevard Suite 110 Richardson, Texas 75082 USA Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 3 Base Station User Manual Navini Networks, Inc. TABLE OF CONTENTS ABOUT THIS DOCUMENT ............................................................................................................. 2 PERMISSIONS, TRADEMARKS & DISTRIBUTION ........................................................................... 3 SAFETY ........................................................................................................................................ 5 REGULATORY INFORMATION ....................................................................................................... 7 BATTERY CAUTION & PROCEDURES............................................................................................ 8 GLOSSARY OF TERMS & ABBREVIATIONS ................................................................................... 9 OVERVIEW................................................................................................................................ 17 RIPWAVE DESCRIPTION.............................................................................................................. 17 PROCEDURAL DOCUMENTS & FORMS........................................................................................ 18 HIGH-LEVEL I&C PROCESS........................................................................................................ 19 BASE STATION COMPONENTS ........................................................................................... 30 BASE TRANSCEIVER STATION (BTS) ......................................................................................... 30 RADIO FREQUENCY SUBSYSTEM (RFS) ..................................................................................... 31 GLOBAL POSITIONING SYSTEM (GPS) ....................................................................................... 32 MOUNTING RACKS & ENCLOSURES........................................................................................... 33 GENERAL SPECIFICATIONS......................................................................................................... 34 BASE STATION SPECIFICATIONS................................................................................................. 35 MATERIALS SPECIFICATIONS ..................................................................................................... 37 APPENDIX A: RFS IDENTIFICATION LABEL ................................................................. 39 2.3 GHZ RFS OMNI HIGH BAND ............................................................................................ 39 2.3 GHZ RFS OMNI LOW BAND............................................................................................. 40 2.3 GHZ RFS SECTOR ............................................................................................................ 41 APPENDIX B: 2.3 GHZ BTS IDENTIFICATION LABEL.................................................. 43 4 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Safety To optimize safety and expedite installation and service, read this document thoroughly. Follow all warnings, cautions, and instructions marked on the equipment and included in this document. To aid in the prevention of injury and damage to property, cautionary symbols have been placed in this document to alert the reader to known potentially hazardous situations, or hazards to equipment or procedures. The symbols are placed before the information to which they apply. However, any situation that involves heavy equipment and electricity can become hazardous, and caution and safety should be practiced at all times when installing, servicing, or operating the equipment. Caution Symbol - possible equipment or property damage Warning Symbol - could cause personal injury or otherwise be hazardous to your health Navini Networks, Inc., expressly requires that when using Navini electronic equipment always follow the basic safety precautions to reduce the risk of electrical shock, fire, and injury to people and/or property. 1. Follow all warnings and instructions that come with the equipment. 2. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the equipment to water could cause severe electrical shock or serious damage to the equipment. 3. Do not allow any type of liquid to come in contact with the equipment. Unplug the equipment from the power source before cleaning. Use a damp cloth for cleaning. Do not use any soaps or liquid cleaners. 4. Follow all airport and FAA regulations when using the equipment on or near aircraft. 5. Only operate the equipment from the type of power source(s) indicated in this manual (110 VAC or Navini supplied battery). Any other type of input power source may cause damage to the equipment. 6. Power the equipment using only the battery or the AC adapter cable provided, and in accordance with the instructions specified in the User Guide. 7. Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped on or tripped over. 8. Do not touch wires where the insulation is frayed or worn unless the equipment has been Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 5 Base Station User Manual Navini Networks, Inc. disconnected from its power source. 9. Do not overload wall outlets, power strips, or extension cords. This can cause serious 10. Do not place the equipment on an unstable surface. It can fall and cause injury or damage to electrical shock or fire. the equipment. 11. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and also voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Only an authorized repair technician should service this product. 12. Do not expose the equipment to extreme hot or cold temperatures. 13. Do not use the equipment under the following conditions:
When the equipment has been exposed to water or moisture. When the equipment has been damaged. When the power cord is damaged or frayed. When the equipment does not operate properly or shows a distinct change in performance. 6 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Regulatory Information FCC Notice WARNING! This device is a Radio Frequency transmitter. It is required to comply with FCC RF exposure requirements for transmitting devices. A minimum separation distance of one meter or more must be maintained between the antenna and all persons during device operations to ensure compliance with the FCCs rules for Radio Frequency Exposure. If this minimum distance cannot be maintained, exposure to RF levels that exceed the FCCs limits may result. INFORMATION TO USER This device has been authorized as a radio frequency transmitter under the appropriate rules of the Federal Communications Commission. Any changes or modifications not expressly approved by Navini Networks could void the users authority to operate the equipment. Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 7 Base Station User Manual Navini Networks, Inc. Battery Caution & Procedures WARNING! To reduce risk of injury or fire, follow these instructions when handling the battery. 1. Risk of explosion is possible if the battery is replaced with one not supplied by Navini Networks. battery disposal guidelines. 2. Do not dispose of the battery in a fire. It may explode. Check with the local codes for 3. Do not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or harmful to humans. If battery substances come in contact with the skin, seek medical help immediately. 4. Do not attempt to recharge the battery by any means except per the instructions in this manual. 5. Remove the battery from the equipment if the equipment is not going to be used for a long period of time. The battery could leak and cause damage to the equipment. 6. Exercise care when handling the battery to prevent shorting the battery with conducting materials such as bracelets, rings, and keys. 7. Store the battery pack in a dry place, 0 to +40 degrees Celsius. 8. Dispose of used batteries according to environmental guidelines. 8 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Glossary of Terms & Abbreviations Term ACC Stands For.... Access Channel or Access Code Channel Acknowledge ACK AP ARP Access Point Address Resolution Protocol ASYNCH Asynchronous ATM BB BCC BS Asynchronous Transfer Mode Broadband Broadcast Code (or Control) Channel Base Station BTS Base Transceiver Station BW Bandwidth BYTE CAM CC CD 1Communications Controller or 2Cross-check Meaning AKA, Paging Channel. The signal path that tells a mobile to prepare for an incoming call. Positive message sent by a protocol to acknowledge reception of a transmitted packet Wireless LAN transceiver that acts as a center point of an all-
wireless network or as a connection point between wireless and wired networks. The function of the ARP is to match higher-level network IP addresses with the physical hardware address of a piece of equipment. Not occurring at regular intervals, as in data piped over a network Transporting a broad range of user data at irregular intervals over network facilities RF system with constant data rate of 1.5 Mbps or higher. A channel of data transmitted by one entity and received by many devices. Network Access equipment and software that transmits and receives, as well as processes, voice or data calls from mobile units to network connections. A Ripwave Base Station consists of the Base Transceiver Station (BTS) and the Radio Frequency Subsystem (RFS), or antenna, plus a Global Positioning System (GPS) antenna for timing. The Ripwave BTS is a two-shelf rack that holds the RF modules and digital circuit cards that interpret radio signals into computer language and sends messages to and from the local or wide area network. It functions between the RFS and the EMS to handle the signaling. Frequency spectrum usable for data transfers. It describes the maximum data rate that a signal can attain on the medium without encountering significant loss of power. Usually expressed in bits per second (digital) or Hertz (analog). 8 bits Interface for purposes of configuring elements in the system and handling other OAM requirements. 1A type of circuit card that resides in the Digital shelf of the Ripwave BTS. It handles all interfaces between BTS and network. 2An EMS functionality that allows the system to perform an automated sanity check of the datafill. floppy disk). It can be inserted into most pcs and read to load files onto a computer 2A software programming term in C language that tells the computer to go to a different location in the computers memory. Byte Configuration & Alarm Manager An EMS functionality that is handled through a Graphical User 1Compact Disk or 2Change Directory1An optical disk capable of storing large amounts of data (700x Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 9 Base Station User Manual Navini Networks, Inc. Stands For.... Code Division Multiple Access Compact Disk - Read Only Memory See CD. If a CD is not Read Only, computers can write data CHP Channel Processor Card Competitive Local Exchange Carrier A telephone company that competes with an incumbent Local Term CDMA CD-ROM CLEC CLI CORBA CPE dB dBd Command Line Interface Common Object Request Broker Agent Customer Premise Equipment Decibel Decibel/Dipole dBi Decibel/Isotropic DHCP DiffServ Dynamic Host Configuration Protocol Differentiated Service DIR DL DNS DS-1 DSL Directory DownLink Domain Name Server Digital Signal - 1 Digital Subscriber Line Meaning Digital cellular technology that uses a spread-spectrum technique where individual conversations are encoded with a random digital sequence. Increases capacity and speed of communications messages between mobile units over other types of wireless networks. to it with that capability. A card in the digital shelf of the BTS that performs the first stage of signal processing for up to 4 antennae. One Navini 2.4 GHz BTS has 8 antennae. The card performs digital-to-analog conversion (DAC) and analog-to-digital conversion (ADC) for up to 10 carriers. Exchange Carrier (LEC). A text-based programming language through which a user communicates with an operating system or an application. A standard for Network Management Systems that allows integration with NMS regardless of programming language or Operating System. Communications equipment that resides at the customers location. Unit of measurement for sound. A ratio, measured in decibels, of the effective gain of an antenna compared to a dipole antenna (2 horizontal rods in line with each other). The greater the dBd value the higher the gain and therefore the more acute the angle of coverage. A ratio, measured in decibels, of the effective gain of an antenna compared to an isotropic antenna (measured along axes in all directions). The greater the dBi value the higher the gain and therefore the more acute the angle of coverage. A protocol for dynamically assigning IP addresses to devices on a network. Different Quality of Service (QoS) descriptions for different types of traffic, i.e., voice, video, email. The DiffServ table is where each level of QoS is defined. Equivalent to Class of Service (COS) in POTS. A special kind of file used to organize other files into a hierarchical structure. In this case, data messages transmitted from the BTS to the CPE. TCP/IP networking term that is a protocol for matching objects to network (IP) addresses. Also T1 or E1. Digital transmission equipment that can handle up to 1.544 Mbps. A type of service whereby users gain access to the Internet through high-speed data networks. 10 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Term DSP EID EMS ERP FCC FE FTP Gain Gb GB GHz GPS GUI HW Hz I&C IEC IF IMA IP ISP Kb KB KHz Stands For.... Digital Signal Processor Equipment Identifier Element Management System Effective Radiated Power Federal Communications Commission Far End File Transfer Protocol Gain Gigabit Gigabyte Gigahertz Global Positioning System Graphical User Interface Hardware Hertz Installation & Commissioning Inter-exchange Carrier Interface Card Inverse Multiplexing over ATM Internet Protocol Internet Service Provider Kilobit Kilobyte Kilohertz Meaning Compressing or manipulating analog signals to digital signals and vice-versa. Field in EMS for assigning IP address or name to individual pieces of equipment for purposes of configuring the system. An application that allows the user to define and manipulate managed objects as a system within an overall network. The actual power in Watts radiated from a transmitters antenna. United States government regulatory agency that supervises, licenses and otherwise controls electronic and electromagnetic transmission standards. A relative term that refers to the receiving element in a network, as opposed to the near-end element that is transmitting data. A TCP/IP method consisting of a client and server and used to transfer files between two or more sites or elements in a network. Ratio of the output amplitude of a signal to the input amplitude of a signal, expressed in decibels (dB). One billion (1,000,000,000) bits. One billion (1,000,000,000) bytes. One billion (1,000,000,000) hertz - cycles per second. Ultra high frequency (UHF) signals, including microwave signals. A constellation of 24 well-spaced satellites that orbit the earth and enable users with GPS antennas to pinpoint their exact geographical position. A graphic rather than purely text based user interface to a computer or computing system. Physical, tangible equipment 1 cycle per second. Term used to describe the procedures of physically installing technical equipment then powering up the equipment to make sure it will operate (to put it into commission). Also IXC. Public switching network service provider (carrier) that connects across and between local exchange carriers
(LEC). Card on the digital shelf of the Ripwave BTS that takes the analog signal from the Channel Processor card (CHP) and converts it to a baseband signal before sending it on to the RF modules for transmission (forward link), and vice-versa
(reverse link). A method of building dynamic routes of 2 or more T1s to increase bandwidth so that PVCs can share the IMA resources, as needed, for data transmissions. A TCP/IP protocol used to route data from its source to its destination. A company that provides access to the Internet. 1,024 bits 1,024 bytes 1,000 hertz. Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 11 Base Station User Manual Navini Networks, Inc. Meaning Physical Layer. Part of the OSI rules and standards for network management. L1 describes the physical layer, or electrical and mechanical port-to-port connections, in the network. Data Link Layer. Part of the OSI rules and standards for network management. L2 describes the data link layer where data is set up and torn down in a specific format (frames), through the overall network. Also responsible for detecting and correcting errors by requesting retransmission. Network Layer. Part of the OSI rules and standards for network management. L3 describes the network addressing that gets data to its destination within the network, i.e., IP addressing. A data network of interconnected computers, servers, printers, and other peripherals that communicate at high speeds over short distances, usually within the same building. Also allows for sharing of resources. Basis of the Point-to-Point Protocol (PPP) scheme for negotiating and establishing connections. An electronic device that lights up when electricity passes through it. Often used to indicate equipment or system state. A protocol that governs the transition of frames between data stations regardless of how the medium is shared. Its the upper sub-layer that further defines the Media Access Control (MAC) protocol. It provides the basis for an unacknowledged connectionless service on a LAN - i.e., error correction, multiplexing, broadcasting. Describes laser, microwave, RF, and infrared transmission systems that require no obstruction in a direct path between the transmitter and the receiver. Protocol that governs access to a network in order to transmit data between nodes. In a wireless LAN, the MAC is the radio controller protocol (L2). One million (1,000,000) bits. One million bytes. Literally - 1,048,576 bytes. Transmission speed at rate of one million bytes per second. A card in the Navini BTS that converts digital signals into analog so the signals can be transmitted over telephone lines, and vice-
versa. Modem stands for modulator/demodulator. One million (1,000,000) hertz - cycles per second. Normally used to refer to how fast a microprocessor can execute instructions. Term L1 L2 L3 Stands For.... Layer 1 Layer 2 Layer 3 LAN Local Area Network LCP LED LLC Link Control Protocol Light-emitting Diode Logical Link Controller LOS Line-of-sight MAC Media Access Control Megabit Megabyte Megabits Per Second Modem Card Megahertz Mb MB Mbps MDM MHz MIB MMDS NE NLOS Multipoint Multi-channel Distribution Service 1Near-end or 2Network Element Management Information Base A collection of managed objects used in SNMP-based networks. MIBs carry information in a standard format so external tools can analyze network management and performance. Fixed wireless, high-speed local service that operates at 2.1 - 2.7 GHz. Speed 10 Mbps. Originally conceived for cable TV service. 1The transmitting end, versus the receiving end, of a signal transmission. 2 A router, switch, or hub in an ISDN network. Describes laser, microwave, RF, and infrared transmission systems that can penetrate obstructions in the path between the transmitter and the receiver. Non Line-of-site 12 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Term NMS Stands For.... Network Management System NOC Network Operations Center OAM OS OSI PC PCB PDU Ping Operation, Administration, Maintenance Operating System Open Systems Interconnection Personal Computer Printed Circuit Board Packet Data Unit or Protocol Data Unit Ping PPPoE Propagation Point-to-point Protocol Over Ethernet Propagation PSK Phase Shift Keying PSN Packet Switched Network PSTN QAM QoS Public Switched Telephone Network Quality of Service Meaning A product that helps manage a network generally hosted on a well-equipped computer such as an engineering workstation. The system tracks network statistics and resources. A centralized point, much like a traffic control tower, where technicians or engineers can monitor network activity, alarms, and statistics, as well as make network configuration and other changes dynamically. For Internet, the NOC is often a hub for ISP services. A set of network management functions. Also describes the human-machine interface tasks - i.e., to operate the system, to administer the system, and to maintain the system. A software program that manages the basic operation of a computer. Most Operating Systems are either based on An ISO model for worldwide communications that defines 7 layers of network protocol: L1 Physical Layer; L2 Data Link Layer; L3 Network Layer; L4 Transport Layer; L5 Session Layer; L6 Presentation Layer; L7 Application Layer. Any IBM-compatible computer, so named because IBMs first commercial end user computer was called a PC. A hardware module that holds electronic circuitry and usually fits into a larger frame where the various PCBs are interconnected electronically. A data packet. Refers to that which is exchanged between peer-
layer entities. Contains header, data, and trailer information. Generalized term from sonar science, where a short sound burst is sent out and an echo or ping is received. Used to determine if signals or packets have been dropped, duplicated, or reordered. A protocol that allows dial-up Internet connections. Includes the Link Control Protocol as well as Network Control Protocols. To spread out and affect a greater area; travel through space, as in radio waves. Digital transmission term that means an angle modulation where the phase of the carrier varies in relation to a reference or former phase. An encoded shift. Each change of phase carries one bit of information, where the bit rate equals the modulation rate. A network in which data is transferred in units called packets. Packets can be routed individually and reassembled to form a complete message at the definition. Typically used in the same context as POTS. Analogous to a network of major highways originally built by a single organization but added to and expanded by multiple organizations. AKA, backbone networks. Creates higher throughput but decreased coverage area. A guaranteed throughput for critical network applications, such as Voice over IP. Term primarily used in an ATM environment. Five classes of service: Class 1 Video; Class 2 Audio; Class 3 Data Connection. Quadrature Amplitude ModulationA bandwidth conservation process routinely used in modems. Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 13 Base Station User Manual Navini Networks, Inc. Radio Frequency Subsystem Receiver Signal Strength Indicator A term that describes the measure of the signal strength in Term RAM RF RFS RSSI Rx S-CDMA SMDS SMS Stands For.... Random Access Memory Radio Frequency Receive Synchronous Code Division Multiple Access Switched Multi-megabit Data Service 1Short Message Service or 2Systems Management Server or 3 Subscriber Management System SNMP Simple Network Management Protocol SNR SSI SW SYN Signal-to-noise Ratio Signal Strength Indicator Software Synthesizer Card SYNCH Synchronous TCC 1Traffic Channel or 2Transmission Control Code TCP Transport Control Protocol TCP/IP Transport Control Protocol/Internet Protocol Meaning Computer memory that can be accessed randomly. A portion of the electromagnetic spectrum in the frequency range between audio and infrared: 100 KHz to 20 GHz. RF measurements are expressed in Hz (unit for measuring frequency); MHz = 1 Million Hz; GHz = 1 Billing Hz. A term for the antenna portion of the base station. kilohertz or gigahertz between the transmission and the receiving end. An abbreviated way of expressing the term, receive, as in to receive a transmission. Wireless technology based on data being transferred at a fixed rate using Code Division Multiple Access algorithms. Connectionless service for MAN/WAN based on 53-byte packets that target the interconnection of different LANs into a public switched network at speeds higher than T1. 1A protocol that allows mobile users to send text-based messages from one device to another. The text appears on a devices screen and may be a maximum 160 characters in length. 2A Windows NT process that allows a network administrator to inventory all hardware and software on the network, then perform software distribution over the LAN. 3Network element that provides AAA functionality: Authentication, Authorization, & Accounting. Standard management request-reply protocol for managing TCP/IP networks. A device is said to be SNMP compatible if it can be monitored or controlled using SNMP messages. Related to RSSI, a measurement of the intended signal being transmitted against the other entities that can interfere with the signal. See RSSI. Computer instructions or data. A circuit card in the Navini BTS digital shelf that provides a local oscillator and system clock with a single calibration transceiver. The card is used to calibrate the Base Station so that no external spectrum analyzer or signal generator is required. Digital packets or signals that are sent at the same, precisely clocked fixed rate of speed. 1A portion of a radio channel used to enable transmission of one direction of a digitized voice conversation (as opposed to the Voice Channel). 2A way of segregating traffic in order to define controlled communities of interest among subscribers. A standardized transport protocol between IP-based network nodes that allows two hosts to establish a connection and exchange streams of data. TCP operates on top of Internet Protocols and handles the multiplexing of sessions, error recovery, reliability and flow; it guarantees packets are delivered in the same order in which they were sent. A set of protocols that allows cooperating computers to share resources across the network. TCP provides the reliability in the transmission, while IP provides connectionless packet service. 14 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Meaning A digital transmission method that combines signals from multiple sources and allows a single channel to alternately carry data in each direction of a link. Memory in a computing device that does not lose its information when powered off. Available as a SIMM or PCMCIA card, it usually stores router Operating System (OS) software. Can be easily updated. A field in the Internet Protocol that specifies how many more hops a packet can travel before being discarded or returned. To send by wire or other medium electronically or through air via electromagnetic waves to a receiving communications device. Describes the direction of signal flow being sent from a subscriber to a network system, as in from a mobile device (CPE) to a base station. An external bus standard for plug-and-play interfaces between a computer and add-on devices, such as a mouse, modem, keyboard, etc. One USB port can connect up to 127 devices. AKA, Virtual Channel Connection or Virtual Circuit Connection. A logical circuit made up of Virtual Channel Links, which carry data between two end points in an ATM network. A 16-bit value in the ATM cell header that provides a unique identifier for the Virtual Channel that carries that particular cell. A connection between two ATM devices. A quantity representative of both magnitude and direction
(energy + orientation in space) AKA, Virtual Path Connection. A grouping of Virtual Channel Connectors, which share one or more contiguous VPLs. A set of Virtual Channels grouped together between cross-points
(i.e., switches). An 8-bit value in the cell header that identifies the VP as well as the VC to which the cell belongs. The VPI + VCI identify the next destination of a cell as it passes through a series of ATM switches. A group of unidirectional VCLs with the same end points in a Virtual Path. Grouping VCLs into VPLs reduces the number of connections to be managed. One or more VPLs makes up a VPC. 1A communications network that spans geographically separate areas and which provide long-haul services. Examples of inter-
networked connections are frame relay, SMDS, and X.25 protocols. 2 General term for any product primarily used to gain access to the Internet, as opposed to being part of the actual Internet devices or software. Term TDD Stands For.... Time Division Duplex TFFS True Flash File System TTL Tx UL USB Time-to-live Transmit UpLink Universal Serial Bus VCC Virtual Channel Circuit VCI VCL Vector VPC VP VPI Virtual Channel Identifier Virtual Channel Link Vector Virtual Private Channel Virtual Path Virtual Path Identifier VPL Virtual Path Link WAN 1Wide Area Network or 2Wireless Access Network Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 15 Base Station User Manual Navini Networks, Inc. 16 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual ROD ROD ROD LIGHTNING LIGHTNING LIGHTNING Overview Ripwave Description A Ripwave system has three main components: the Customer Premise Equipment (CPE); the Base Station; and the Element Management System (EMS). The Base Station performs the CPE registration and call processing, and provides the interface between the backhaul network and the EMS. It is made up of the Base Transceiver Station (BTS) and the Radio Frequency Subsystem
(RFS) (Figure 1). Figure 1: Base Station Installation With Panel Antenna Note: The illustration shows both Note: The illustration shows both an outdoor and an indoor BTS, an outdoor and an indoor BTS, but only one panel antenna. In but only one panel antenna. In reality, each BTS requires reality, each BTS requires its own panel. its own panel. OPTION 2 OPTION 2 OPTION 2 OUTDOOR BTS OUTDOOR BTS OUTDOOR BTS 24VDC @ 60A 24VDC @ 60A 24VDC @ 60A ETHERNET ETHERNET ETHERNET TELCO TELCO TELCO PSXGROUND BAR PSXGROUND BAR PSXGROUND BAR NAVINI NAVINI NAVINI BTS BTS BTS SELF SUPPORTING SELF SUPPORTING SELF SUPPORTING GUIDE GUIDE GUIDE ANTENNA TOWER ANTENNA TOWER ANTENNA TOWER 24VDC 24VDC 24VDC
@ 60A
@ 60A
@ 60A ETHERNET ETHERNET ETHERNET
/ TELCO
/ TELCO
/ TELCO CABINET CABINET CABINET GND GND GND CABLE CABLE CABLE LADDER LADDER LADDER GROUND GROUND GROUND BAR BAR BAR PSX PSX PSX GROUND BAR GROUND BAR GROUND BAR PSX-ME PSX-ME PSX-ME SURGEPROTECTOR SURGEPROTECTOR SURGEPROTECTOR OPTION 1 OPTION 1 OPTION 1 INDOOR BTS INDOOR BTS INDOOR BTS SHELTER / HUT SHELTER / HUT SHELTER / HUT ANTENNA ANTENNA ANTENNA BRACKET BRACKET BRACKET CABLE LADDER CABLE LADDER CABLE LADDER PANEL PANEL PANEL ANTENNA ANTENNA ANTENNA CABINET CABINET CABINET GND GND GND GPS GPS GPS CABLEENTRY CABLEENTRY CABLEENTRY OVERHEAD OVERHEAD OVERHEAD RF CABLES RF CABLES RF CABLES GROUND GROUND GROUND CABLE CABLE CABLE HANGERS HANGERS HANGERS BAR BAR BAR Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 17 Navini Networks, Inc. Base Station User Manual Procedural Documents & Forms You will refer to other Ripwave documents, procedures, and forms in the process of installing and commissioning the Base Station. The product documentation is provided on the Ripwave Standard Documentation CD (Table 1). As well, the EMS manuals can be viewed on-line through the EMS Server and Client applications. Table 1: Ripwave Standard Documentation CD Order Number 95-00116-00 Component or Part Format Number MSWord/.pdf 40-00016-03 MS Word/.pdf 40-00017-00 MS Word/.pdf 40-00147-00 MS Word/.pdf 40-00031-00 MS Word/.pdf 40-00016-01 MS Word/.pdf 40-00016-02 MS Word/.pdf 40-00033-00 MS Word/.pdf 00-00046-00 MS Word/.pdf 40-00032-00 MS Word/.pdf 40-00112-00 MS Word/.pdf 40-00098-00 MS Word/.pdf 40-00096-00 MS Word/.pdf 40-00111-00 MS Word/.pdf 40-00097-00 40-00099-00 MS Word/.pdf Varies w/each release MS Word/.pdf EMS Overview Manual EMS Software Installation Guide EMS-OSS Integration Guide EMS Administration Guide Ripwave Configuration Guide EMS CLI Reference Manual Ripwave Alarm Resolution Reference Manual System Operations, Maintenance & Troubleshooting Guide*
EMS Diagnostic Tools Guide Ripwave Modem Quick Installation Guide English Spanish Ripwave Modem User Guide English Spanish Customer Release Notes
*Available 4Q03 A separate CD specifically created for personnel involved with installation and commissioning of the Ripwave system, called VAR Documentation CD, may be ordered by authorized VARS, and business partners. The CD includes detailed procedures and electronic forms that Navini uses during the I&C process. Table 2 contains a partial listing of the files on this CD. The I&C forms found on the CD are referenced throughout this manual. Table 2: VAR Documentation CD Order Number 95-00017-00 Site Candidate Evaluation Form RFS System Test Form Base Station Calibration Verification Form Drive Study Survey Form Location (FTP) Test Form Customer Acceptance Form BTS Outdoor Selection Guide Rectifier/Battery Backup Specification Part Number 40-00091-00 40-00093-00 40-00059-00 40-00076-00 40-00077-00 40-00117-00 44-00035-00 44-00036-00 Format Excel Spreadsheet Excel Spreadsheet Excel Spreadsheet Excel Spreadsheet Excel Spreadsheet MS Word Document MS Word/.pdf MS Word/.pdf 18 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Site Selection, Design, and Preparation Physical Installation Commissioning, with Acceptance Testing and Sign-off High-level I&C Process To put the I&C activities in the context of overall system deployment, Figure 2 provides a flow of the key activities that are performed prior to and during the installation and commissioning of the Ripwave Base Station. Post-I&C, the system that has been installed and commissioned goes through Acceptance Testing against the customers objectives for that site. Once customer sign-
off on the site is achieved, the customer becomes fully responsible for operating the system. Different job holders may perform various portions of these activities and not necessarily all of the activities. In fact, Marketing and Engineering personnel typically handle the earlier tasks, while installation may be a stand-alone function. Commissioning may or may not be handled by the same people who designed or installed the site. Regardless of who does them, these key activities have to be accomplished for successful deployment:
Prior to installation, Navini and the customer formulate a Project Plan and Responsibility Assignment Matrix (RAM) to clarify who will do what to complete the I&C activities. If requested by the customer, Navini may provide personnel, procedures, forms, and/or tools required to install and commission the Base Station equipment. They may also provide special commissioning software programs, computers, and any other special test equipment required. As part of the I&C duties, all testing results are recorded and kept for the customer to review and approve. These test results include the cable sweeps, the BTS Calibration Verification, RF System Tests, Drive Study, Line-of-Sight (LOS) FTP tests, and Non-Line-of-Sight (NLOS) FTP test results. The I&C Supervisor provides site tracking and weekly status reports. All of these tasks can be negotiated with the customer. If Navini Networks is hired by a customer to provide Installation & Commissioning Services, involvement and some actual deliverables are still required by the customer. For example, the customer will need to review or perhaps even explain their Site Design Specifications, approve Logistics Plans, provide shipping information, approve the Network Architecture Plan, etc. As part of a successful hand-off from Navini to the customer, it is usually necessary for Navini to provide some product training to customer personnel who will support the Base Station operation on-going. Customers may opt to take on a Train-the-Trainer program, in which case Navini certifies the customers instructors who then provide staff training thereafter. Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 19 Base Station User Manual Navini Networks, Inc. Phase I: Pre-installation - Site Selection, Design & Preparation 1 - Complete the Project Plan for this deployment. <Program or Project Manager>
3 - Conduct a site survey, filling out the Site Candidate Evaluation Form. BEGIN 2 - Generate a coverage prediction map.
<RF Engineering>
Figure 2: High Level I&C Process Flowchart A 5 - Acquire information about the final site selected by the customer. Physical site design completed. 4 - Complete the Interference Analysis, following the Interference Sweep Procedure or, if available, using the Interference Sweep Tool. Sample Statement of Work (SoW) Sample Responsibility Assignment Matrix (RAM) Sample Work Breakdown Structure (WBS) Site Candidate Evaluation Form Interference Sweep Procedure Interference Sweep Tool BTS Specifications RFS Data Sheets BTS Outdoor Enclosures Guide Rectifier/BBU Specifications Sample Base Station Drawing 20 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Phase I: Pre-installation - Site Selection, Design & Preparation, continued A 6 - Complete the Network Architecture design.
<Network Planning>
7 - Antenna Power & Cable selection. Antenna Power & Cable Selection Procedure &
Form 8 - Develop a Bill of Materials (BoM).
<Customer >
Sample BoM 9 - Acquire the materials. <Customer>
10 - Confirm the customer backhaul, EMS Server, FTP Server, input power and grounding are installed and operational at site. Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 21 Base Station User Manual Navini Networks, Inc. Phase II: Physical Installation 1 - From the shipping containers received at the customer site, gather Manufacturings inventory sheet and test data that was collected before the BTS & RFS equipment shipped. Verify all equipment arrived (inventory it), serial numbers match paperwork, and the test data is available. Keep this as part of the customer site records. 2 - Install all system buss bars and surge protectors. 3 - Cut cables. Install connectors on cables. Install Connectors on Cables Procedure 4 - Install & sweep the RF cables. Record results on the RFS System Test Form. RFS System Test Form 5 - Install & sweep the GPS cables. 6 - Test & install the data/power cable. 7 - If required, install the BTS mounting rack. 8 - Install the BTS chassis. 9 - Install & verify the BTS & RFS grounding. A Chassis Alarms Information Sample Tri-sector BTS Grounding Drawing 22 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Installation, continued A 10 - Install & verify the DC input power source to the BTS. Sample Tri-sector BTS Power Drawing Single Antenna Test Procedure 11 - Install the GPS antennas. 12 - Sweep the RFS, per the Single Antenna Test Procedure. Record the results & the RFS serial numbers on the RFS System Test Form
(same form as Step 3, Appendix O). 13 - Install the RFS & surge protectors. Connect the 9 RF cables & the data/power cable to the RFS. 14 - Sweep the installed RFS & cables to verify connections & cable loss. Record results on the RFS System Test Form (same form as Steps 3 & 11, Appendix O). 15 - Verify that the digital cards & RF/PA cards are installed and seated properly. 16 - Record the serial & version numbers of the digital and RF/PA cards on the Base Station Installation Certification Form. Base Station Installation Certification Form B Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 23 Base Station User Manual Navini Networks, Inc. Installation, continued B 17 - If required in the Responsibility Assignment Matrix (RAM) portion of the Project Plan, test the backhaul to the customer demarcation point. 18 - Provide a printed package of the measured results and equipment inventory to the customer on-site. 19 - Go over the results using the printed package and obtain customer sign-off on the completion of the Installation portion of the work. Use the Base Station Installation Certification Form for sign-off (same form as Step 15, Appendix T). 24 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Phase III: Commissioning 1 - Review the customers network plans - i.e., T1 vs Ethernet backhaul. 2 - Are you using the customers EMS Server?
Yes No 3a - Install & configure the Test EMS Server & Client. Connect to the BTS. Excel Configuration Form 3b - Install & configure the customer EMS Server & Client. Connect to the BTS. 4 - Enter the RFS configuration by running the RFS script that shipped with the antenna equipment. 5 - Verify that all cables are connected. 6 - Power up the BTS & reconfigure the basic Boot Line parameters through the serial port on the CC card. 7 - After the BTS has been powered up at least 15 minutes, perform 3 calibrations. A Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 25 Base Station User Manual Navini Networks, Inc. Commissioning, continued A 8 - Did it pass calibration?
Yes No 9a - Perform system troubleshooting procedures. 9b - Perform Base Station calibration. Verify and record the measurements on the Base Station Calibration Verification Form. Base Station Calibration Verification Form 10 - Did it pass calibration verification?
Yes 11b - Perform local wired Modem test. No 11a - Perform system troubleshooting procedures. Local Modem Test Procedures No - Go to 11a 12 - Did it pass the wired Modem test?
Yes B 26 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Commissioning, continued B 13 - Perform the local over-
the-air (OTA) Modem test. No - Go to 11a No C 14 - Did it pass the OTA Modem test?
Yes 15 -Was the Test EMS used?
Yes 16 - Install & configure the Customer EMS Server & Client. Connect to the BTS. 17 - Verify the EMS Server & BTS connectivity. 18 - Perform calibration. Ensure successful results 3 times. D Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 27 Base Station User Manual Navini Networks, Inc. C Commissioning, continued D
*Note: Step 19 is performed only if no RF plot is available. 19* - Validate that the GPS &
Constellation Debugger are installed and operational on the Drive Study laptop. Perform a Preliminary Drive Study. Record the results on the Drive Study Form. 20 - Perform the Preliminary LOS Location
(FTP) Test. Complete 3 uploads & 3 downloads at 3 locations. Record the results on the FTP Test Form. 21 - Perform the Preliminary NLOS Location
(FTP) Test. Complete 3 uploads & 3 downloads at 3 locations. Record the results on the FTP Test Form. 22 - Send all preliminary test results to Navini Technical Support for evaluation. Drive Study Form FTP Test Form 23 -Results adequate?
No 24a - Adjust the RF parameters and troubleshoot. Go back to Step 18, Perform calibration. Yes E 28 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Commissioning, continued E 24b - Perform full Drive Study, and record the results on the Drive Study Form. This is used for tuning the model (same form as Step 19, Appendix X). 25 - Perform full LOS Location (FTP) Test. Record the results (same form as Step 20, Appendix Y). 26 - Perform full NLOS Location (FTP) Test. Record the results (same form as Step 20, Appendix Y). 27 - Send test results to Navini Technical Support. 28 - Verify system operation with multiple Modems in use. 29 - Back up the EMS database. 30 - Gather all required documents & forms to create a delivery package for the Customer sign-
off and for the Navini Techical Support database. See Installation Closeout Documentation. 31 - Participate in the Customer sign-off of the Customer Acceptance Form. Site Installation Closeout Documentation Customer Acceptance Form Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 29 Base Station User Manual Navini Networks, Inc. Base Station Components Base Transceiver Station (BTS) The BTS consists of the RF Power Amplifiers (PAs), the digital circuit cards, the backplane, and the mechanical enclosure or housing. It performs the signal processing and RF transmission for the system. There are two types of chassis: Combo and Split. The Combo Chassis is used primarily with 2.4 GHz systems. The Split Chasses is used for all other (2.3, 2.5, 2.6 GHz) systems (Figure 3). The chassis is compartmentalized into two sections - the RF shelf and the Digital shelf. The BTS connects to the network using a 10/100 Base-T Ethernet connection or up to 8 T1 interfaces. Up to three BTS assemblies can be installed per system, depending on the configuration. The BTS specifications are provided later in this document. Figure 3: BTS Chassis Digital Shelf Digital Shelf
(Circuit Cards)
(Circuit Cards) Combo Chassis Combo Chassis Split Chassis Split Chassis
(Power Amplifiers)
(Power Amplifiers) RF Shelf RF Shelf 30 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Panel (Front) Panel (Front) Radio Frequency Subsystem (RFS) The Radio Frequency Subsystem (RFS) is mounted on a transmission tower or building rooftop. It transmits and receives data to and from the Ripwave Customer Premise Equipment (CPE) using a digital beamforming transmission technique. The RFS may be either a panel antenna or an omni antenna (Figure 4). An RFS panel transmits in a directional mode, covering a transmit angle of 120 degrees. The antenna can be used as a single mode antenna, or it can be used in a group of two or three sectored antennas, covering 240 and 360 degrees respectively. Each panel requires a BTS to operate. For example, in a tri-sectored cell with 3 panels, you would need 3 BTSs. The omni antenna provides omni-directional coverage of 360 degrees. An RFS panel or omni contains eight (8) antenna elements, cavity filters, and, optionally, low noise amplifiers (LNA). For downtilt, the omni must be situated as it comes from the factory. A panels downtilt can be adjusted at the site. The higher up the antenna is placed, the more downtilt it typically requires. Figure 4: RFS Panel (Back) Panel (Back) Omni Omni Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 31 Base Station User Manual Navini Networks, Inc. VIC 100 GPS VIC 100 GPS Global Positioning System (GPS) One or two Global Positioning System (GPS) antennas are used with each Base Station. A GPS antenna works with a constellation of satellites that orbit the earth, and it provides the ability to pinpoint geographical locations. The two types of GPS antennas that may be ordered with a Ripwave Base Station are the VIC 100 and the Motorola Timing 2000 (Figure 5). Figure 5: GPS Antennas Motorola Timing Motorola Timing 2000 GPS 2000 GPS 32 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Mounting Racks & Enclosures The BTS can be installed indoors or outdoors in industry standard 19- or 23-inch racks. Rack adapters are needed to mount the equipment in a standard 23-inch rack. For outdoor BTSs, the customer can supply any standard enclosure from a multitude of vendors. Figure 6 shows 3 BTSs installed indoors. Figure 6: Indoor BTS Data/Power Cable Lightning Arrestors Across Top Data/Power Cable Lightning Arrestors Across Top Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 33 Base Station User Manual Navini Networks, Inc. General Specifications Input Power The BTS requires +21 to 28 VDC power supply rated at 60 amps (combo chassis) and at 50 (RF shelf) and 20 (Digital shelf) for the split chassis. Installers are referred to industry standards for power supply installations. Humidity The operating environment of the BTS must control relative humidity to 5% to 95% RH, non-
condensing. Heat Dissipation The combo BTS chassis, under normal operating conditions, will dissipate a maximum of 1000 Watts or 3415 BTUs. The split chassis will dissipate a maximum of 1500 watts. Airflow Fresh air intake for the BTS chassis is along the lower front vertical panel. Exhaust is out of the upper rear of the chassis. The I&C crew must ensure there are no obstacles to airflow present in these areas. Exhaust air from other equipment should not mix with the BTS fresh air intake. Accessibility The BTS is intended for installation and use only in a restricted access location. 34 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Base Station Specifications Current Ripwave operating frequencies include those shown in Table 3. Testing on other frequencies is underway and soon will be commercially available. The specifications are shown in Table 4. Table 3: Operating Frequencies Model Frequency Range Operating Band Chassis 2.3 GHz 2.305 GHz to 2.360 GHz WCS Split Table 4: Split Chassis System (WCS Systems) Antenna Downtilt:
Antenna Gain:
Antenna Options:
Backhaul Interfaces:
Bandwidth Allocation:
Baseband Modulation:
Beamforming Gain:
Configurations:
DC Power Consumption:
DC Power Interface:
Duplex Format:
Humidity:
Mechanical Dimensions:
Multiple Access Schemes:
Operational Frequency Band:
Operational Temperature:
Polarization:
Power Control:
Regulatory:
Reliability/Availability:
RF Channel Bandwidth:
RF Output Power (per channel):
Sensitivity:
Serviceability:
Spreading Spectrum Scheme:
Storage Temperature:
System Features:
System Throughput:
2 & 4 degree options for Omni-directional; Mechanical for 120 degree Sectored 12dBi Omni-directional, 17 dBi for 120-degree Sectored Omni-directional or 120-degree Sectored 10/100 BaseT Ethernet or ATM over T1; up to (8) T1s with or without IMA, long haul support Dynamic Uplink QAM4 18dB RFS Omni-directional or Sectored. 1 BTS per antenna.
+21VDC to +28VDC; 50 amps RF shelf, 20 amps Digital shelf; 1353 Watts typical, 1500 Watts maximum 2 - lugs for +24V DC and 24V return. Time Division Duplexing (TDD) 0 to 95% non-condensing Digital: H19.2 X W19.0 X D12.9 (add ~1.3 to D with modules installed). RF: H14.0 X W19.0 XD15.2 (add ~1.5 to D with modules installed). Multi-carrier Beamforming Synchronized (MCBS) CDMA See Table 3 0 to +50 degrees C (indoor); -40 to +50 degrees C (outdoor) Vertical Forward & reverse, open & closed loop UL 1950, FCC part 27 Load-sharing 6MHz 5 watts max
-114 dBm/single channel (NF of 5dB) Field replaceable cards, EMS remote reset; Front and rear access required Direct Sequence Spreading (DSS)
-40 to +70 degrees C Reed Soloman forward error correction (FEC), congestion control, automatic repeat request (ARQ), extensive GoS/QoS mechanisms 12 Mbps (fully loaded max raw data rate downstream + upstream) Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 35 Base Station User Manual Navini Networks, Inc. Up/down Link Duplex:
Upgradeability:
Weight:
Symmetrical or Asymmetrical TDD with a maximum of 3:1 ratio for down/up allocations Software downloads Digital Shelf 35 lbs + RF Shelf 82 lbs. 36 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual Materials Specifications The Base Station installation requires general materials and parts for installation. In Table 5 is a partial list of the items that may be used for a typical installation of the Ripwave Base Station. The quantity and use of materials will vary depending on the specific installation. The lists in Table 5 are based on a 150-foot site. Table 5: Materials Specifications Base Station General Materials Requirements List BTS Install Kit 96-05000-00 Description Supplier Rqd Qty Lightning Rod Ground Rod Ground Wire Ground Wire Ground Buss Bar (Tower) Ground Buss Bar (Shelter) Ground Lug Ground Lug Ground Lug Grounding Kit (1/2"), LMR600 Grounding Kit (3/8"), LMR400 Grounding Kit (1/2"), RF-1/2"
Universal Grounding kits RFS Antenna RFS Surge Protector RFS Antenna Mount Weatherproofing kits RFS Antenna Power Cable RFS Antenna Jumper Cable Mounting Clamps Mounting Clamps RFS Cable RFS Type N Male Connectors Hoisting Grips Cushion Hangers 1/2"
Cushion Hangers 3/8"
Angle Adapter Cross Cushion Hanger Mounts Universal Hanger 1/2"
Support Blocks RFS Connector RFS Connector RFS Connector RFS Connector RFS Connector GROUNDING Lightning Rod - 8'
Tinned copper ground rod, 5/8" x 8'
# 2 Stranded green ground wire
# 6 AWG Stranded Green Wire Ground buss bar kit, 1/4" x 2-1/2" x 12-1/2"
Copper Gnd buss bar, 1/4" x 4", drilled to 5/8"
#6, One Hole
#6, Two Hole
#2, Two Hole STD Ground kit, LMR-600, 5' x 3/8" 2 hole lug STD Ground kit, LMR-400, 5' x 3/8" 2 hole lug Ground Kit, RF-1/2", 2 hole lug Universal grounding kit, 3' with 3/8" 2 hole lug ANTENNA SYSTEM Omni Antenna RFS surge protector Omni Antenna Mount Universal weatherproofing kit, Large RFFE Power/Data Main Cable assembly RFFE Power/Data Jumper cable, 10 Feet. Crossover Clamp, 1.5" x 3.5" OD Pipe to pipe clamps, kit of 2 MAIN FEEDER LMR 600, 1/2" coaxial cable EZ600 N type, Male connectors Pre-laced Hoisting Grip, 1/2"
Cushion hanger assembly, 5H, 1/2", kit of 5 Cushion hanger assembly, 6H, 3/8" for LMR400 Adapter, Galvanized, Angle kit of 10 Cross cushion hanger mount, kit of 5 Hanger, Universal, Snap-In, 1/2", kit of 10 Mini Coax Support Blocks, kit of 10 MALE, N TYPE, 3/8 INCH MALE, N TYPE, 5/8 INCH MALE, N TYPE, 1/2 INCH MALE, N TYPE, 7/8 INCH FEMALE, N TYPE, 5/8 INCH MTS MTS MTS LOCKE MTS ALT T&B T&B T&B MTS MTS NK Cables MTS Navini POLYPHASER MTS MTS Probity Probity MTS MTS HUTTON/TIMES HUTTON/TIMES MTS MTS MTS MTS MTS NK Cables MTS NK Cables NK Cables NK Cables NK Cables NK Cables 50 Ft 50 Ft 1 Kit 1 Kit 3 Pcs 6 Pcs 2 Pcs 27 Kits 2 Kits 9 Pcs 1 Kit 2 Kits 1 Kit 1 Kit 1 Kit 1 Kit 1350 Ft 36 Pcs 10 Pcs 12 kits 6 Kits 2 Kits Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 37 Base Station User Manual Navini Networks, Inc. RFS Connector RFS Connector RFS Connector RFS Connector RFS Connector Weatherproofing RFS Cable RFS Cable RFS Cable RFS Cable GPS Antenna GPS Surge Protector GPS Surge Protector GPS Cable GPS Type N Male Connectors FEMALE, N TYPE, 7/8 INCH N STRAIGHT PLUG, EZ PIN, FEMALE (LMR400) N RIGHT ANGLE, EZ PIN, MALE (LMR400) N RIGHT ANGLE, SOLDER PIN, MALE (LMR400) N STRAIGHT, SOLDER PIN,MALE (LMR400) Sealing Compound, Coax Cable Connector CABLE, COAX, RF, CORRUGATED, 3/8 INCH CABLE, COAX, RF, CORRUGATED, 5/8 INCH CABLE, COAX, RF, CORRUGATED, 1/2 INCH CABLE, COAX, RF, CORRUGATED, 7/8 INCH GPS SYSTEM GPS Antenna, N-type Female GPS surge protector, Redundant GPS surge protector, Non-redundant LMR400, 3/8" coaxial cable EZ400 N type, Male connectors ENTRY PORT SYSTEM NK Cables HUTTON/TIMES HUTTON/TIMES HUTTON/TIMES HUTTON/TIMES NK Cables NK Cables NK Cables NK Cables NK Cables Motorola POLYPHASER POLYPHASER HUTTON/TIMES HUTTON/TIMES Goose Neck - J type Hood entry Feed Thru Entry Panel Boot Assembly Kits Boot Assembly Kit, 4" w/ 4 holes (LMR 600) TBD TBD MTS Ripwave 2400 BTS BTS Surge Protector 24 VDC Power Supply DC Power Wire DC Power Wire BREAKER ROUTER SERIAL WAN T1-IMA MODULE Air conditioning 110 VAC Power Outlets Telco / Ethernet Connectors RJ45 Expanding Foam Sealer Bolts (Ground) Nuts (Ground) Flat Washer (Ground) Lock Washer (Ground) Star Washer (Ground) Star Washer (BTS Chassis Ground) Nut (BTS, Power/Data Surge P) Equipment Open Rack Tie wraps Split Bolt #2/0 Uni-Struts Anchor/Expansion Bolts Cable Ladder BTS SYSTEM BTS surge protector
# 6 AWG, Stranded, RED Wire
# 6 AWG, Stranded, BLACK Wire 24 VDC, 60A Distribution Breaker CISCO 2600 Dual 10/100 ENET, WIC/NM Slots Serial Interface WAN Card, One Port Multiport T1/E1 Network Module with IMA MISCELLANEOUS Bolt, Hex, 1/4-20 x 1.000 LG, SSPA Nut, Reg, Hex, Cres, 1/4-20UNC Wash, Flat, Cres, #6 T-B-Reg .156x.438x.040 Wash, Lock. Split, Cres 1/4, Reg .252x.487x.062 Wash, Star, 1/4 Wash, Star, #10 Nut, Hex, #10-24 Rack, 19" x 72" with 1/4" x 1" holes Navini POLYPHASER Argus Argus CISCO CISCO CISCO TBD TBD TBD TBD QUESTRON QUESTRON QUESTRON QUESTRON QUESTRON QUESTRON QUESTRON CHATSWORTH TBD TBD TBD TBD TBD 2 Pcs 2 Pcs 1 Pc 200 Ft 8 Pcs 4 Kits 9 Pcs 1 Unit 38 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual APPENDIX A: RFS IDENTIFICATION LABEL 2.3 GHz RFS Omni High Band 2.72 +/-.03 2.72 +/-.03 Navini Networks Navini Networks Ripwave RFS Ripwave RFS Model No. 2300-RFS Model No. 2300-RFS Part No. 95-23008-20 Part No. 95-23008-20 Freq Range: 2345-2360 MHz Freq Range: 2345-2360 MHz Electrical Down Tilt: 2 Electrical Down Tilt: 2 3.58 +/-.03 3.58 +/-.03 RF SAFETY NOTICE:
RF SAFETY NOTICE:
This antenna shall be mounted in accord-
This antenna shall be mounted in accord-
ance with the limits for Maximum Personnel ance with the limits for Maximum Personnel Exposure (MPE) to radio frequency fields as Exposure (MPE) to radio frequency fields as per 1.1307 of the Rules of the Federal per 1.1307 of the Rules of the Federal Communications Commission (FCC). This Communications Commission (FCC). This includes labeling on this antenna to identify includes labeling on this antenna to identify the site-specific minimum separation dist-
the site-specific minimum separation dist-
ance as defined by FCC OET Bulletin 65. ance as defined by FCC OET Bulletin 65. Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 39 Navini Networks, Inc. Base Station User Manual 2.3 GHz RFS Omni Low Band 2.72 +/-.03 2.72 +/-.03 Navini Networks Navini Networks Ripwave RFS Ripwave RFS Model No. 2300-RFS Model No. 2300-RFS Part No. 95-23008-30 Part No. 95-23008-30 Freq Range: 2305-2320 MHz Freq Range: 2305-2320 MHz Electrical Down Tilt: 2 Electrical Down Tilt: 2 RF SAFETY NOTICE:
RF SAFETY NOTICE:
This antenna shall be mounted in accord-
This antenna shall be mounted in accord-
ance with the limits for Maximum Personnel ance with the limits for Maximum Personnel Exposure (MPE) to radio frequency fields as Exposure (MPE) to radio frequency fields as per 1.1307 of the Rules of the Federal per 1.1307 of the Rules of the Federal Communications Commission (FCC). This Communications Commission (FCC). This includes labeling on this antenna to identify includes labeling on this antenna to identify the site-specific minimum separation dist-
the site-specific minimum separation dist-
ance as defined by FCC OET Bulletin 65. ance as defined by FCC OET Bulletin 65. 3.58 +/-.03 3.58 +/-.03 40 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual 2.3 GHz RFS Sector 2.72 +/-.03 2.72 +/-.03 Navini Networks Navini Networks Ripwave RFS Ripwave RFS Model No. 2300-RFS Model No. 2300-RFS Part No. 95-23000-06 Part No. 95-23000-06 Freq Range: 2345-2360 MHz Freq Range: 2345-2360 MHz Electrical Down Tilt: 6 Electrical Down Tilt: 6 2.72 +/-.03 2.72 +/-.03 Navini Networks Navini Networks Ripwave RFS Ripwave RFS Model No. 2300-RFS Model No. 2300-RFS Part No. 95-23000-01 Part No. 95-23000-01 Freq Range: 2305-2320 MHz Freq Range: 2305-2320 MHz Electrical Down Tilt: 6 Electrical Down Tilt: 6 3.58 +/-.03 3.58 +/-.03 3.58 +/-.03 3.58 +/-.03 RF SAFETY NOTICE:
RF SAFETY NOTICE:
This antenna shall be mounted in accord-
This antenna shall be mounted in accord-
ance with the limits for Maximum Personnel ance with the limits for Maximum Personnel Exposure (MPE) to radio frequency fields as Exposure (MPE) to radio frequency fields as per 1.1307 of the Rules of the Federal per 1.1307 of the Rules of the Federal Communications Commission (FCC). This Communications Commission (FCC). This includes labeling on this antenna to identify includes labeling on this antenna to identify the site-specific minimum separation dist-
the site-specific minimum separation dist-
ance as defined by FCC OET Bulletin 65. ance as defined by FCC OET Bulletin 65. RF SAFETY NOTICE:
RF SAFETY NOTICE:
This antenna shall be mounted in accord-
This antenna shall be mounted in accord-
ance with the limits for Maximum Personnel ance with the limits for Maximum Personnel Exposure (MPE) to radio frequency fields as Exposure (MPE) to radio frequency fields as per 1.1307 of the Rules of the Federal per 1.1307 of the Rules of the Federal Communications Commission (FCC). This Communications Commission (FCC). This includes labeling on this antenna to identify includes labeling on this antenna to identify the site-specific minimum separation dist-
the site-specific minimum separation dist-
ance as defined by FCC OET Bulletin 65. ance as defined by FCC OET Bulletin 65. Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 41 Base Station User Manual Navini Networks, Inc. 42 Part #40-00197-00 Rev C v1.0 (1.20) September 26, 2003 Navini Networks, Inc. Base Station User Manual APPENDIX B: 2.3 GHZ BTS IDENTIFICATION LABEL 2.72 +/-.03 2.72 +/-.03 Navini Networks Navini Networks Navini Networks Ripwave BTS Ripwave BTS Ripwave BTS Model No. 2300-DIGITAL Part No. 95-70003-05 Freq Range US: 2305-2320 MHz 2345-2360 MHz INTL: 2375-2385 MHz FCC ID: PL6-WCS-BTS1 3.00 +/-.03 Navini Networks Navini Networks Navini Networks Ripwave BTS Ripwave BTS Ripwave BTS Model No. 2300-RF Part No. 95-50003-01 Freq Range US: 2305-2320 MHz 2345-2360 MHz INTL: 2375-2385 MHz FCC ID: PL6-WCS-BTS1 3.00 +/-.03 CLEAR WINDOW FOR NAVINI BAR CODE (1.5000 X .375, SIZE OF LABEL) NOTE: This device has not (yet) been authorized by the FCC. Therefore, the FCC ID n umber is not valid and could possibly change. Part #40-00047-01 Rev C v1.0 (1.20) September 26, 2003 43
1 | Manual 2 | Users Manual | 261.08 KiB |
Appendix L: Antenna Power & Cable Selection Overview This section provides formulas and data that are necessary inputs for determining the right cable to be measured, cut, and installed. There are 3 types of cables that are part of the Base Station installation: antenna cables, calibration (cal) cable, and data/power cable. The antenna cables are the eight cables that carry amplified RF signals. They run between the RF/PA cards and the 8 antenna elements. The calibration (cal) cable is a single RF coaxial cable that provides an RF feedback path for calibrating the system. It runs between the backplane of the digital shelf and the RFS. The data/power cable may or may not be a separate cable from the cal cable. It is possible to use different types of cable with different loss factors for the antenna cables and cal cable. The formulas presented in this section call for either an antenna cable loss or a cal cable loss. Most applications deploy the same cable type for both the antenna and cal cables. To determine the type of cable and acceptable loss of that cable for a site, the operating transmit and receive range must be known. This is commonly referred to as the maximum transmit output power and the receiver sensitivity range. The operating transmit power and receive range should have been identified during the site survey, or they may be based on regulatory compliance. Determining the cable type and acceptable loss for a site are typically driven by two goals: (1) Which is the least expensive cable; and (2) Which has the higher (normally) loss. Whether or not the goals are achieved is determined by the output power. For example, the maximum transmit output power for a 2.6 Base Station might be given as +30dBm, or 1 Watt, to the antenna. An example of receiver sensitivity for a 2.6 system would be given as 80 to 90 dBm. In addition to cable power loss, other types of loss have to be factored - for example, the calibration board. The calibration board is part of the RFS that samples the energy being transmitted from or received by the 8 antenna elements and combines that energy which is used when performing a calibration on the Base Station. This loss, plus cable loss and other types of loss in the equipment are called out in the following procedure. Procedure Read and follow the 7 steps/formulas below, in the order shown, to determine the resulting PA/RFS output power and desired transmit and receive calibration range for the type of Base Station you will be installing. Refer to Tables L1 and L2 to complete the steps. Table L1 provides Base Station operating parameters based on system type (2.3, 2.4, etc.), as well as other variables. Table L2 provides cable attenuation data. Before you begin, read through the steps/formulas, notes, and Table L1 in detail. Refer to the column letters at the top of Table L1 to locate the appropriate values requested in some of the formulas. Note that step/formula 1 contains a sub-procedure for determining antenna cable loss using Table L2. I&C Guide 9/26/2003 Step/Formula 1 Determine the maximum capable BTS output power to the antenna.
= [(PA Output to Meet FCC) or (to Meet SNR)] BTS Loss RFS Loss BTS Antenna Cable Loss*
[Column A or B]1 [Column E]2 [Column F or G] [Calculated* or Measured]
BTS Antenna Cable loss < 18 dB for ACTIVE RFS configurations BTS Antenna Cable loss < 8 dB for PASSIVE RFS configurations Change the EMS settings accordingly. Antenna Cable Selection
*Sub-procedure: Calculate BTS antenna cable loss, referring to Table 8.
= [[Distance (length in ft) 100 ft] x Attenuation value/cable type] + 0.6 for 6 connectors/3 cables
.. . Step/Formula 2 Determine the maximum BTS output power that can be calibrated.
= Max Synth Input + Cal Cable Loss + Min Cal Board Loss3 + Backplane Loss4
[Column K] + [Calculated or Measured] + [Note 3] + [Default of 5.0 in EMS or Measured]
Step/Formula 3 Determine the actual** max BTS output power available to the antenna.
= The lesser of the two values of Step/Formula 1 and Step/Formula 2 (aka, the floor)
** Actual is what you can calibrate the BTS at. Step/Formula 4 Determine the minimum BTS output power that can be calibrated .
= Min Synth Input + Cal Cable Loss + Max Cal Board Loss3 + Backplane Loss4
[Column J] + [Calculated or Measured] + [Note 3] + [Default of 5.0 in EMS or Measured]
Determine the actual** maximum EIRP. Step/Formula 5
= Step/Formula 3 + Antenna Gain. The antenna gain is affected by the type of antenna (omni, panel, 2.3, 2.4, etc.) and refers to the values in the RFS Configuration Script that accompanied the antenna from Manufacturing.
**Actual is what you can calibrate the BTS at. Step/Formula 6 Determine the minimum BTS RX input power that can be calibrated.
= Min Synth Output - Cal Cable Loss - Min Cal Board Loss3 - Backplane Loss4
[Column H] - [Calculated or Measured] - [Note 3] - [Default of 5.0 in EMS or Measured]
Step/Formula 7 Determine the maximum BTS RX input power that can be calibrated.
= Max Synth Output - Cal Cable Loss -Max Cal Board Loss3 - Backplane Loss4
[Column I] - [Calculated or Measured] - [Note 3] - [Default of 5.0 in EMS or Measured]
Cal Cable Selection I&C Guide 9/26/2003 NOTES 1This note pertains to Step/Formula 1: For PA_Output_Power, if in the U.S. use Column A. If outside the U.S., as a precaution contact Navini Technical Support (Engineering) for sign-off. The value input cannot be more than the value shown in Column B. 2This note pertains to Step/Formula 1: BTS_Loss is either (a) loss with a filter - i.e., if operating in the U.S. or other market that requires a filter, or (b) loss with a bypass cable. The first number (+1) is the correct value if a standard filter is used. The second number (0.4) is the correct value if a bypass cable is used. In Column D, for a 2.3 GHz system the values are the same for both the 8-carrier and the 10-carrier systems. 3Min loss in Cal Board is 27 dB. Max loss in Cal Board is 31 dB. 4In the EMS the backplane loss will show 5.0 as default. Actual measured loss will be indicated on the back of the chassis. Table 7: Transmitter Operating Parameters A B C D Max E PA Max Output Power to Meet FCC Limits
(dBm) PA Max Output Power
(dBm) PA Min Output Power Before Damage Level or Auto Shutdown*
(dBm) Antenna Terminal Power to Meet FCC Limits
(dBm)
+38
+40
+42
+30 2.3
(6 carrier) 2.3
(8 carrier)
+38
+40
+42 2.3
(10 carrier)
+37
+40 2.4 (combo)
+37
+37 2.5
+39
+41
+42
+42
+42 2.6
(EFGH Split)
+39
+41
+42 2.6
(EF Combo)
+37
+41
+42
+30
+30
+17.5 Limited by Cable Loss Limited by Cable Loss Limited by Cable Loss F Active RFS Loss Type
(dB) G H Synth Min Outpu Passive RFS Loss Type**
* (dB)
(dBm) t I J Synth Max Output
(dBm) Synth Min Input
(dBm) K Synth Max Input
(dBm) 3.2 1.7
-60
-32
-23
+0 3.2 1.7
-60
-32
-23
+0 3.2 3.2 3.2 1.7
-60
-32
-23
+0 1.7
-50
-20
-35
-10 1.7
-60
-32
-23
+0 3.2 1.7
-60
-32
-23
+0 3.2 1.7
-60
-30
-20
+0 BTS Loss With Standard Filter /
Bypass Cable**
(dB) 1 / 0.4 Block Filter has 1.0 dB max insertion loss 1 / 0.4 Block Filter has 1.0 dB max insertion loss 1 / 0.4 Block Filter has 1.0 dB max insertion loss 0.4 Bypass 1.0 / 0.4 Channel Filter has 1.0 +/- 0.2 dB insertion loss 1.0 / 0.4 Channel Filter has 1.0 +/- 0.2 dB insertion loss 1.8 / 0.4 Channel Filter has 1.8 +/- 0.2 dB including cable to backplane
* The lowest value at which 2.3, 2.5, and 2.6 EFGH PAs will shut down automatically. There is no auto shutdown for 2.4 and 2.6 EF combo systems.
** The value at which the bypass does not meet FCC limits.
***Passive configurations of BTS affect system Noise figure. For passive systems other than 2.4, consult SYSTEMS ENGINEERING. Table L2: Cable Attenuation in dB per 100 Feet I&C Guide 9/26/2003 Cable Type 2 LDF 12-50 1 5/8 LDF 7-
50A LMR 1700 1 LDF 6-
50A LMR 1200 7/8 LDF 5-
50A LMR 900 5/8 LDF 4.5-
50A LDF 4-
50A LMR 600 Frequency/Size 2.350 1.980 1.670 1.550 1.200 1.090 0.870 0.865 0.630 0.590 1.11 1.24 1.27 1.3 0.994 N/A N/A N/A 1.22 24 2000 MHz 2400 MHz 2500 MHz 2600 MHz Weight lbs/ft Bend Radius (inches) 1.5 1.7 1.42 1.99 1.82 2.64 2.27 3.25 1.5 2.2 2.02 2.9 2.52 3.63 3.9 4.3 1.71 1.53 2.26 2.07 3 2.58 3.70 4.42 5.8 5.48 5.79 1.8 1.57 2.3 2.12 3.1 2.64 3.78 4.5 5.94 5.91 0.82 0.74 0.63 0.45 0.33 0.27 0.15 0.15 0.13 0.14 0.08 0.07 20 13.5 15 6.5 10 3 8 5 1.5 3 1.25 3.75 1 Super flex FSJ 4-
50B 0.520 LMR 500 3/8 LDF 2-
50A LMR 400 0.500 0.440 0.405 5.09 4.84 5.17 6 5.67 5.4 5.67 6.6 6.8 6.9 5.6 0.1 I&C Guide 9/26/2003
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-09-29 | 2345 ~ 2360 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-09-29
|
||||
1 | Applicant's complete, legal business name |
Cisco Systems, Inc
|
||||
1 | FCC Registration Number (FRN) |
0018679845
|
||||
1 | Physical Address |
125 W Tasman
|
||||
1 |
San Jose, California 95134
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@americantcb.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
PL6
|
||||
1 | Equipment Product Code |
WCS-BTS1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
G******** T****
|
||||
1 | Title |
Manager , EMC Standards and Operations
|
||||
1 | Telephone Number |
408-5********
|
||||
1 | Fax Number |
408-5********
|
||||
1 |
g******@cisco.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Navini Networks
|
||||
1 | Name |
J**** G******
|
||||
1 | Physical Address |
2240 Campbell Creek Blvd
|
||||
1 |
Richardson, Texas 75082
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
214-6********
|
||||
1 |
j******@navini.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Ripwave Base Station | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power is conducted at the antenna terminal. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
n/a | ||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 27 | 2305 | 2320 | 1 | 10 ppm | 500KD7W | ||||||||||||||||||||||||||||||||||
1 | 2 | 27 | 2345 | 2360 | 1 | 10 ppm | 500KD7W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC